Paxar TC941XQR User's Manual
Contents
1. Quick Reference Switching Between Print Modes Peel Mode or Non peel Mode 1 Press the Pizza Hut button on your keypad terminal 2 Press the Cheese button to display NON PEEL MODE or PEEL MODE until the print mode you want is displayed 3 Press the Pizza Hut button to save your choice 4 The printer LED will blink red Press the printer FEED button The printer LED will turn green indicating the printer is ready Default mode is non peel Loading Labels for Hot Hold Peel Labeling Follow these instructions to print and peel labels from the backing paper one at a time Supply Holder 1 Press the cover release levers towards Guides you to release the cover and then lift it open 2 Pull out the peel door located on the front of the printer to display the peel roller and the peel bar F J i o AMEE i E L i e P Tn a E n t ga 7 ee Oe en ese _ 3 Remove a supply holder guide from one end of the supply holder 4 Slide a roll of labels onto the supply holder 5 Place the supply holder guide back onto the end of the supply holder Label Roll Mount Peel Door Peel Bar Ka Peel Roller Push the label core adapters into the ends of the supply and center the labels on the supply holder The number 4 on the supply holder should be visible on either side of the supply holder guides 6 Place the loaded supply holder in th2. e slots in the label roll mount Push the plastic line attached to the end of the supply holder out of the way 7 Remove the first two labels from the backing paper 8 Feed the labels printing side up under the supply guides and over the platen roller 9 Feed the backing paper under the peel roller and through the peel door opening Peel Roller Peel Door Opening TC941XQR Rev AA 3 04 2004 Paxar Americas Inc All rights reserved 10 11 12 Loading Labels for Dough and MRD Non Peel Labels Follow these instructions to print multiple labels on a continuous strip Push the peel door closed and close the cover until it locks in place Press the FEED button A label will peel off of the backing paper Remove the peeled label and another one prints Supply Holder 1 Press the cover release levers towards the Guides front of the printer to release the cover then lift it open 2 Remove the supply holder guide from one end of the supply holder 3 Slide a roll of labels onto the supply holder 4 Place the supply holder guide back onto the end of the supply holder Push the label core adapters into the ends of the supply and center the labels on the supply holder The number 4 on the supply holder should be visible on either side of the supply holder guides Insert the ends of the supply holder into the Supply Guides slots in the label roll mount Push the plastic line attached t
3. o the end of the supply holder out of the way k Feed the labels printing side up under the supply guides and over the platen roller Turn the dial to move the supply guides so they barely touch the edges of the backing paper Close the cover until it locks in place Platen Roller 9 Press the FEED button The indicator light should be GREEN IF YOU NEED HELP CALL 1 888 666 9414 IF YOU NEED MORE PAPER LABELS CALL ONE OF THE FOLLOWING PrimeSource 800 397 4737 order item 85221 Wasserstrom 800 999 9277 order item 374014 Unified Food Co Op 800 444 4144 order item 374014
Download Pdf Manuals
Related Search