PASCO Specialty & Mfg. AP-8210 User's Manual
Contents
1. completely dimmed or it may still be slightly illuminated B A I aL O 800 772 8700 z www pasco com Millikan LED Light Source Caution Caution If the LED of the Millikan LED Light Source does fail do not attempt to replace it The LED is a surface mount component that is soldered to the printed circuit board inside the light source Contact PASCO about returning the Millikan LED Light Source or the entire Millikan Oil Drop Apparatus Replacing the Light Source e Make sure that the power supply is discon nected from the light source on the Millikan remove Oil Drop Apparatus e Use a phillips head screwdriver to remove the four screws from the light source assem bly e Carefully lift the light source assembly off Pees the base and set it aside ee e Remove the stainless steel spring that sits on the base under the light source assembly e Place the AP 8212 Millikan LED Light Source on the base with the same orientation as the light source you removed Millikan Light Source e Use the four small screws provided to secure the LED Light Source to the base spring 2 remove base Millikan LED Light Source 2 IZEIA Model No AP 8212 012 13300B Technical Support Technical Support For assistance with any PASCO product contact PASCO at Address PASCO scientific 10101 Foothills Blvd Roseville CA 95747 7100 Phone 916 786 3800 worldwide 800 772 8700 U S2. Fax 916 786 3292 Web Www pasco com Email support pasco com For the latest information about the AP 8212 Millikan LED Light Source go to the PASCO web site at www pasco com and enter AP 8212 in the Search field Limited Warranty For a description of the product warranty see the PASCO catalog Copyright The PASCO scientific 012 13300B Millikan LED Light Source Instruction Sheet is copyrighted with all rights reserved Per mission is granted to non profit educational institutions for reproduction of any part of this manual providing the reproductions are used only in their laboratories and classrooms and are not sold for profit Reproduction under any other circumstances without the written consent of PASCO scientific is prohibited Trademarks PASCO PASCO scientific DataStudio PASPORT Xplorer and Xplorer GLX are trademarks or registered trademarks of PASCO scientific in the United States and or in other countries For more information visit www pasco com legal Windows is a registered trademark of Microsoft Corporation in the United States and or other countries Mac is a trademark of Apple Computer Inc registered in the U S and other countries Product End of Life Disposal Instructions This electronic product is subject to disposal and recycling regulations that vary by country and region It is your responsibility to recycle your electronic equipment per your local environmental laws and regula tions to ensure that i
3. Instruction Sheet 012 13300B For Use with AP 8210 Millikan LED Light Source AP 8212 Brightness adjustment knob LED port Power input jack 12 VDC 1A Screws 4 A Included Items Part Number Millikan LED Light Source Assembly AP 8212 Screw 6 32 x 1 4 phillips head 4 610 041 Introduction The AP 8212 Millikan LED Light Source is designed for use with the AP 8210 Millikan Oil Drop Apparatus You can use the AP 8212 Millikan LED light emitting diode Light Source to replace the Light Source Assem bly on the AP 8210 The Millikan LED Light Source is brighter than the original light source on the AP 8210 and the brightness of the LED Light Source is adjustable The very long expected life span of the LED means that the LED Light Source should never need replacement NOTE If the LED does fail do not attempt to replace it Contact PASCO about returning it for repair The Millikan LED Light Source includes the LED assembly and four screws for attaching the LED assembly to the base of the AP 8210 Millikan Oil Drop Apparatus The Millikan LED Light Source uses the same power sup ply 100 to 240 VAC 10 VDC 1 A as the Light Source Assembly that it replaces The LED brightness adjust ment knob is on the top of the LED Light Source Turn the knob clockwise to increase brightness and counterclockwise to decrease brightness Note that when the LED brightness knob is turned fully counterclock wise the LED may be
4. t will be recycled in a manner that protects human health and the environment To find out where you can drop off your waste equipment for recycling please contact your local waste recy cle disposal service or the place where you purchased the product The European Union WEEE Waste Electronic and Electrical Equipment symbol and on the product or its packaging indicates that this product must not be disposed of in a standard waste container IZEIA 3
Download Pdf Manuals
Related Search