PASCO Specialty & Mfg. OS-8518 User's Manual
Contents
1. Instruction Sheet for the PASCO Model OS 8518 012 05629A 3 95 1 00 GEOMETRIC OPTICS KIT po Screen Basic Optics Bench 2 Lenses in Separate Holders Figure 1 Geometric Optics equipment Introduction The PASCO OS 8518 Geometric Optics Kit includes Basic Optics Bench Screen attaches to Bench Lenses 2 in Holders e 100 mm Lens e 200 mm Lens The OS 8518 Geometric Optics Kit is included in the OS 8515 Basic Optics System but can be purchased sepa rately The OS 8515 system includes OS 8517 Light Source OS 8516 Ray Optics Kit OS 8518 Geometric Optics Kit Limited Warranty PASCO scientific warrants this product to be free from defects in materials and workmanship for a period of one year from the date of shipment to the customer PASCO will repair or replace at its option any part of the product which is deemed to be defective in material or workman ship This warranty does not cover damage to the product caused by abuse or improper use Determination of whether a product failure is the result of a manufacturing defect or improper use by the customer shall be made solely by PASCO scientific Responsibility for the return of equipment for warranty repair belongs to the customer Equipment must be properly packed to prevent damage and shipped postage or freight prepaid Damage caused by improper packing of the equipment for return ship ment will not be c2. overed by the warranty Shipping costs for returning the equipment after repair will be paid by PASCO scientific 1995 PASCO scientific This instruction sheet written edited by Jon Hanks I ci1entific ot GO 10101 Foothills Blvd P O Box 619011 Roseville CA 95678 9011 USA Phone 916 786 3800 FAX 916 786 8905 email techsupp PASCO com teach physics Geometric Optics 012 05629A Mounting the Screen and Lenses to the Optics Bench OS 8518 To mount the viewing screen to the Optics Bench slide the square nut into the center T slot in the bench See Figure 2 below Mounting Screen on Bench Optics Bench Screen Hole for Rack Storage Figure 2 Mounting Screen on Bench The lens holders simply snap into place on the bench See Figure 3 Mounting Lens Holders on Bench To slide the lens holder along the bench grasp the lens holder at its base and squeeze the locking clip on the side of the holder Continue to squeeze the locking clip while the lens is slid along or removed from the bench When the locking clip is released the lens is held firmly in place Lens Holder Hole for Rack Storage Locking Clip Position Indicator Figure 3 Mounting Lens Holder on Bench Storage All parts lens holders screen etc have a hole to allow them to be hung on a peg board for compact storage PASCO scientific
Download Pdf Manuals
Related Search