Home

Panasonic WV-SF332 Installation Guide

1. About the user manuals There are 2 sets of operating instructions for the WV SF336 WV SF335 WV SF332 NTSC model WV SF336E WV SF335E WV SF332E PAL model as follows e Installation Guide Explains how to install and connect devices e Operating Instructions PDF Explains how to perform the settings and how to operate this camera Adobe Reader is required to read these operating instructions PDF on the provided CD ROM When the Adobe Reader is not installed on the PC download the latest Adobe Reader from the Adobe web site and install it WV SF336 WV SF335 WV SF332 or SF336 SF335 SF332 shown in the instructions and illus trations used in these operating instructions indicates the WV SF336 WV SF335 WV SF332 WV SF336E WV SF335E WV SF332E The screens used in these operating instructions show the cases of NTSC models System requirements for a PC CPU Intel Core 2 Duo 2 4 GHz or faster recommended Memory 512 MB or more A minimum of 1 GB memory is required when using Microsoft Windows 7 or Microsoft Windows Vista Network Interface 10BASE T 100BASE TX 1 port Audio Interface Sound card when using the audio function Monitor Image capture size 1 024 x 768 pixels or more Color 24 bit True color or better OS Microsoft Windows 7 Professional 64 bit Microsoft Windows 7 Professional 32 bit Microsoft Windows Vista Business SP1 32 bit Microsoft Windows XP Profess
2. Less than 90 VBS 1 0 V p p 75 Q composite signal RCA jack ALARM IN ALARM OUT AUX OUT x1 each 23 5 mm monaural mini jack Input impedance Approx 2 kQ Applicable microphone Plug in power type Supply voltage 2 5 V 0 5 V Input level Approx 10 dBV 23 5 mm stereo mini jack monaural output Output impedance Approx 600 Q Line level 2129 5 mm x 93 mm H 5 3 32 x 3 21 32 H WV SF836 Approx 410 g 0 82 bel VWW SF335 WV SF332 Approx 370 g 0 82 lbs Main body ABS resin sail white Dome section Clear acrylic resin 1 3 inch type MOS image sensor Approx 1 3 megapixels 4 80 mm H x 3 60 mm V 3 16 H x 5 32 VW Progressive WV SF336 1 280x960 WV SF335 1 280x960 Color 0 3 Ix 0 03 footcandle F1 4 Auto slow shutter Off 1 30 s AGC High 0 019 Ix 0 0019 footcandle F1 4 Auto slow shut ter max 16 30 s AGC High BW 0 2 Ix 0 02 footcandle F1 4 Auto slow shutter Off 1 30 s AGC High 0 013 Ix 0 0013 footcandle F1 4 Auto slow shut ter max 16 30 s AGC High Converted value 39 Wide dynamic range Gain AGC Adaptive black stretch Light control mode setting Shutter speed Auto slow shutter Simple black amp white mode White balance Digital noise reduction Video analytics Face detection Privacy zone Camera title on screen VMD alarm Lens Focal length Maximum aperture ratio Angular field of view Adjusting angle
3. Otherwise it may cause deformation discoloration and malfunc tion Keep this camera away from water and moisture Installing place Do not place this product in the following plac es e Locations where it may get wet from rain or water splash e Locations where a chemical agent is used such as a swimming pool e Locations subject to humidity dust steam and oil smoke e Locations in a specific environment where a solvent or a flammable atmosphere exists e Locations where a radiation an X ray a strong radio wave or a strong magnetic field is generated e Locations where corrosive gas is pro duced Locations where it may be dam aged by briny air such as seashores e Locations where the temperature is not within 10 C to 50 C 14 F to 122 F e Locations subject to vibrations This prod uct is not designed for on vehicle use e Locations subject to condensation as the result of severe changes in temperature In case of installing the camera in such locations the dome cover may become foggy or condensation may be caused on the cover Be sure to remove this product if it is not in use Shielded STP LAN cables must be used with this unit to ensure compliance with EMC standards PAL models only Before installation e The camera mount bracket described on page 19 shall be used to mount the cam era e When this camera and camera mount bracket are mounted on a ceiling or a wall use the screws described on p
4. TCP IP UDP IP HTTP RTSP RTP RTP RTCP FTP SMTP DHCP DNS DDNS NTP SNMP crosoft Windows 7 Professional 64 bit crosoft Windows 7 Professional 32 bit crosoft Windows Vista Business SP1 32 bit crosoft Windows XP Professional SP3 indows Internet Explorer 8 0 icrosoft Windows 7 Professional 32 bit 64 bit indows Internet Explorer 7 0 icrosoft Windows Vista Business SP1 32 bit crosoft Internet Explorer 6 0 SP3 icrosoft Windows XP Professional SP3 SS SS ZS GE Sie 14 Depends on network conditions Alarm image transmission FTP periodic transmission When the FTP transmission is failed backup on an optional SDHC SDC memory card is available 41 42 Multi screen Compatible SDHC SD memory card option Up to 16 camera images can be displayed simultaneously on a multi screen Manufactured by Panasonic SDHC memory card 4 GB 8 GB 16 GB 32 GB SD memory card 256 MB 512 MB 1 GB 2 GB except miniSD card and microSD card 1 Either H 264 or MPEG 4 is selectable 2 Transmission for 2 streams can be individually set in the same compression method 3 Refer to Notes on Windows Vista Windows 7 PDF for further information about system requirements for a PC and precautions when using Microsoft Windows 7 or Microsoft Windows Vista 4 When using IPv6 for communication use Microsoft Windows 7 or Microsoft Windows Vista Standard accessories Installation Guide this document
5. Warranty card NTSC model only CD ROMI nadaa Code label ccce The following parts are used during installation procedures Power Cord plUQ occcconcccoccccnancnnnn External I O terminal plug Installation template label Cable io inicias ai AO pc 4 SEENEN pe 4 EE pe 4 Ee pe 4 e Ee pe 4 A A pc 4 EE pc A 2 pcs incl 1 spare 1 The CD ROM contains the operating instructions PDFs and different kinds of tool software programs 2 This label may be required for network management The network administrator shall retain the code label Optional accessories Dome cover Smoke type Ceiling Mount Bracket Ceiling Mount Bracket 1 PAL models only WV CF5S WV Q168 WV Q105 1 Information for Users on Collection and Disposal of Old Equipment and used Batteries Cd These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC and 2006 66 EC By disposing of these products and batteries correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could
6. Lem Focus ring Loosen O Tighten Loosen the zoom lock knob and move the knob between TELE and WIDE to obtain the appro priate angle of view 30 When the auto focus AF button on the lateral side of camera is pressed the auto focus AF indicator will light for around 10 seconds and the focus is automatically adjusted Important e Do not move the focus ring Note e f the zoom lock knob is slightly fastened before the zoom ring is moved the ring will become stable to ease the fine adjustment e When positioning the zoom ring at a step short of the T or W end the focus adjustment will be easier e When shooting in the following place or the following subjects focus may not be adjusted automatically In this case adjust the focus manually from the setup menu Refer to the Operating Instructions PDF for how to perform the manual focus adjustment from the setup menu e Place where the dome easily becomes dirty e Subj moving frequently e Subj with large illuminance change e Subj with low illuminance e Subj with reflection or extra brightness e Subj through a window e Subj with less contrast such as white wall e Subj with heavy flicker 31 32 Adjust the angular field of view and the focus EEE The angular field of view and focus can be adjusted in accordance with the distance between the camera lens and a photographic subject These adjustments shall be performed together with the camera
7. and Installation page 28 for how to mount the cam era in case of using the optional ceiling mount bracket Roof space Z WV Q105 option Za 4 pcs WV Q105 supplied SMM LLY AL z Ceiling board such A Camera Safety wire as plaster board 21 22 Insert remove an SDHC SD memory card Important e Before inserting the SDHC SD memory card turn off the power of the camera first e When inserting an SDHC SD memory card make sure the direction e Before removing the SDHC SD memory card select Not use for SD memory card on the SD memory card tab of the setup menu first Turn off the power after Not use selection and then unload the SDHC SD memory card When the SDHC SD memory card is inserted or removed with the power on data in the SDHC SD memory card may be damaged Operating Instructions PDF Detach the dome cover Page 18 Insert an SDHC SD memory card fully into the SDHC SD memory card slot Attach the dome cover Page 34 When removing the SDHC SD memory card from the SDHC SD memory card slot detach the dome cover page 18 and push the card until the lock is released After removal attach the dome cover Page 34 SDHC SD memory card slot Dome cover fixing screw M3 step screw Connection Caution e FOR UL LISTED MODEL S ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY Before starting the connection turn of
8. dome section of the dome cover to adjust the direction so that no eclipse may be caused Important e For inner dome adjustments adjust the marker to the ADJUST position If the dome section is moved with unreasonable force from the LOCK position this may be a cause of destruc tion Rotate the dome cover clockwise to adjust the marker to LOCK Fix the dome cover and camera by tighten ing the dome cover fixing screw M8 step screw x1 g After the installation is complete remove the cover film which was removed halfway in Step 2 completely from the dome sec tion Dome cover fixing screw M3 step screw Push down the auto focus AF button with a ballpoint pen to adjust the focus again Refer to page 30 for further information about adjustment E Auto focus AF button Important e Before pressing the auto focus AF button make sure that the marker is adjusted to the LOCK position EF e When using a model equipped with the focus assist F A function defocus may be caused by the dome cover attached EX EZ In this case the focus adjustment will be easier by detaching the dome cover and moving the focus ring to the N direction e Before attaching the dome cover make sure that the subject is present 35 36 Configure the network settings Install the software Before installing the software refer to the readme file on the provided CD ROM first Software included on
9. max 30 fps JPEG 1 280 x 720 640 x 360 320 x 180 max 30 fps MPEG 4 is not supported Resolution WV SF332 Image compression method 2 Transmission interval Audio compression method Bandwidth control Protocol 083 4 Browser Maximum concurrent access number FTP client Aspect ratio 4 3 H 264 800 x 600 VGA 640 x 480 QVGA 320 x 240 max 30 fps MPEG 4 VGA 640 x 480 QVGA 320 x 240 max 30 fps JPEG 800 x 600 VGA 640 x 480 QVGA 320 x 240 max 30 fps Aspect ratio 16 9 H 26 640 x 360 320 x 180 max 30 fos JPEG 640 x 360 320 x 180 max 30 fos MPEG 4 is not supported H 264 MPEG 4 Image quality Low Normal Fine Transmission type Unicast Multicast Audio bit rate Constant bit rate 64kbps 128kbps 256kbps 384kbps 512kbps 768kbps 1024kbps 1536kbps 2048kbps 3072kbps 4096kbps 8192kbps Unlimited only in H 264 mode Frame rate priority 1fps 3fps 5fps 7 5fps 10fps 12fps 15fps 20fps 30fps PAL models only JPEG Image quality O SUPER FINE 1 FINE 2 3 4 5 NORMAL 6 7 8 9 LOW 10 steps 0 9 Transmission type PULL PUSH 0 1 fps 30 fps JPEG frame rate will be restricted when dis playing both JPEG and H 264 MPEG 4 images G 726 ADPCM 32kbps 16kbps Unlimited 64kbps 128kbps 256kbps 384kbps 512kbps 768kbps 1024 kbps 2048kbps 4096kbps 8192kbps IPv6 TCP IP UDP IP HTTP RTP FTP SMTP DNS NTP SNMP IPv4
10. required to correct the inter ference at his own expense FCC Caution To assure continued compliance example use only shielded interface cables when connecting to computer or peripheral devices Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment ForU S A The serial number of this product may be found on the surface of the unit You should note the model number and serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft Model No Serial No We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006 95 EC and 2004 108 EC Wir erkl ren in alleiniger Verantwortung daf das Produkt auf das sich diese Erklarung bezieht mit den folgenden Normen oder normativen Dokumenten bereinstimmt Gem f den Bestimmungen der Richtlinie 2006 95 EC und 2004 108 EC Nous d clarons sous notre propre responsabilit que le produit auquel se r f re la pr sente d claration est conforme aux normes sp cifi es ou a tout autre document normatif conform ment aux dispositions des directives 2006 95 CE et 2004 108 CE Nosotros declaramos bajo nuestra nica respo
11. which a two gang junction box is installed e Fix the camera with 4 screws M4 locally procured Screws va locally procured Important e When tightening the screws be careful to ensure that the cables does not tangle the cables Note e For ceiling mounting 4 FRONT of direction marker for installation indicates the center of panning Adjustment of lens direction will become easier when the camera is mounted with the FRONT marker ori ented to the desired shooting area Refer to the Adjustment section gt pages 29 to 33 for further information about adjustment e For wall mounting The camera shall be mounted with the FRONT marker facing upward Adjust the camera angle When determining the camera angle repeat fine adjustments by gradually moving the panning table tilting table and azimuth adjustment ring Horizontal position Panning Loosen the panning lock screw rotate the panning table to adjust the pan direction Adjustable range 350 Panning is possible within the range of 180 when panning clockwise and 170 when panning counterclockwise After adjustment tighten the panning lock screw to fix the panning table Recommended tightening torque 0 39 N m 0 29 lbf ft Home position The position where the home SE position markers are aligned 5 d O e SY Panning table Panning lock screw LOCK Clockwise panning end marker Rotat
12. Network Network Resolution WV SF836 WV SF835 WV SF332 800x600 Color 0 2 Ix 0 02 footcandle F1 4 Auto slow shutter Off 1 30 s AGC High 0 013 Ix 0 0013 footcandle F1 4 Auto slow shut ter max 16 30 s AGC High BW 0 13 Ix 0 013 footcandle F1 4 Auto slow shutter Off 1 30 s AGC High 0 009 Ix 0 0009 footcandle F1 4 Auto slow shut ter max 16 30 s AGC High Converted value On Off On Low On Mid On High Off On Off Indoor scene 50 Hz 60 Hz Outdoor scene Fix shutter Off 1 30 3 100 3 120 2 100 2 120 1 100 1 120 1 250 1 500 1 1 000 1 2 000 1 4 000 1 10 000 Off Max 2 30s Max 4 30s Max 6 30s Max 10 30s Max 16 30s Off AUTO ATW1 ATW2 AWC High Low On Off with the XML notification setting On Off up to 2 zones available Up to 16 characters alphanumeric characters marks On Off On Off 4 areas available 2 8 mm 10 mm 5 16 13 32 1 1 3 WIDE 1 3 1 TELE Horizontal 27 7 TELE 100 3 WIDE Vertical 20 8 TELE 73 5 WIDE Horizontal 180 clockwise 170 counterclockwise Vertical 75 Image tilt adjustment range 100 _ 10BASE T 100BASE TX RJ45 connector Aspect ratio 4 3 H 264 1 280 x 960 VGA 640 x 480 QVGA 320 x 240 max 30 fps MPEG 4 VGA 640 x 480 QVGA 320 x 240 max 30 fps JPEG 1 280 x 960 VGA 640 x 480 QVGA 320 x 240 max 30 fps Aspect ratio 16 9 H 264 1 280 x 720 640 x 360 320 x 180
13. OF MERCHANTABILITY FITNESS FOR ANY PARTICULAR PURPOSE OR NON INFRINGEMENT OF THE THIRD PARTY S RIGHT THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS CHANGES ARE ADDED TO THE INFORMATION HEREIN AT ANY TIME FOR THE IMPROVEMENTS OF THIS PUBLICATION AND OR THE CORRESPONDING PRODUCT S Disclaimer of warranty IN NO EVENT SHALL Panasonic System Networks Co Ltd BE LIABLE TO ANY PARTY OR ANY PERSON EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT FOR THE CASES INCLUDING BUT NOT LIMITED TO BELOW 1 ANY DAMAGE AND LOSS INCLUDING WITHOUT LIMITATION DIRECT OR INDIRECT SPECIAL CONSEQUENTIAL OR EXEMPLARY ARISING OUT OF OR RELATING TO THE PRODUCT PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER UNAUTHORIZED DISASSEMBLE REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER 4 INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT 5 ANY PROBLEM CONSEQUENTIAL INCONVENIENCE OR LOSS OR DAMAGE ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY 6 ANY CLAIM OR ACTION FOR DAMAGES BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE CAMERA S PICTURE INCLUDING SAVED DATA FOR SOME REASON BECOMES PUBLIC OR IS USED FOR THE PURPOSE OTHER THAN
14. Panasonic Installation Guide Network Camera wenns WV SF336 WV SF335 WV SF332 WW SF336E WV SF335E WV SF332E Befor a ela ae ci e this S oduct plea kg these Gg sade era ual for future The model number is abbreviated in some descriptions in this manual WARNING e Apparatus shall be connected to a mains sock et outlet with a protective earthing connection e The mains plug or an appliance coupler shall remain readily operable e To prevent fire or electric shock hazard do not expose this apparatus to rain or moisture e The apparatus should not be exposed to drip ping or splashing and that no objects filled with liquids such as vases should be placed on the apparatus e All work related to the installation of this prod uct should be made by qualified service per sonnel or system installers e For PERMANENTLY CONNECTED APPARATUS provided neither with an all pole MAINS SWITCH nor an all all pole circuit breaker the installation shall be carried out in accordance with all applicable installation rules e The connections should comply with local electrical code UL listed model No WV SF336 WV SF335 WV SF332 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrow head symbol within an equilat eral t
15. SURVEILLANCE 7 LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE 2 3 The network cameras WV SF830 series are designed to operate using a PC on a network 10BASE T 100BASE TX By connecting to a network LAN or the Internet images and audio from the camera can be moni tored on a PC via a network WV SF336 e Maximum image capture size 1 280 x 960 Aspect ratio of 4 3 1 280 x 720 Aspect ratio of 16 9 e Compatible with the auto focus AF function WV SF335 e Maximum image capture size 1 280 x 960 Aspect ratio of 4 3 1 280 x 720 Aspect ratio of 16 9 e Compatible with the focus assist F A function WV SF332 e Maximum image capture size 800 x 600 Aspect ratio of 4 3 640 x 360 Aspect ratio of 16 9 e Compatible with the focus assist F A function Note e lt is necessary to configure the network settings of the PC and its network environment to monitor images from the camera on the PC It is also necessary to install a web browser on the PC About notations The following notations are used when describing the functions limited for specified models The functions without the notations are supported by all models EEN Tre functions with this notation are available when using the model WV SF336 GEES Tre functions with this notation are available when using the model WV SF335 GE Tre functions with this notation are available when using th
16. age 19 The screws to be used are not provided Prepare the screws according to the mate rial structure strength and other factors of the mounting area and the total weight of objects to be mounted e Ensure that the mounting surface anchor and screws are sufficiently strong e Do not mount this product on a plaster board or a wooden section because they are too weak If this product is unavoidably mounted on such a section the section shall be sufficiently reinforced or use an optional ceiling mount bracket WV Q105 Screw tightening e The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area e Do not use an impact driver Use of an impact driver may damage the screws or cause tightening excessively e When a screw is tightened make the screw at a right angle to the surface After tightening the screws or bolts perform visual check to ensure tightening is enough and there is no backlash Radio disturbance When this product is used near TV radio anten na strong electric field or magnetic field near a motor a transformer or a power line images may be distorted and noise sound may be pro duced PoE Power over Ethernet Use a PoE hub device that is compliant with IEEE802 3af standard Router When connecting this product to the Internet use a broadband router with the port forward ing function NAT IP masquerade Refer to
17. anasonic Corporation http panasonic net Importer s name and address to follow EU rules Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15 22525 Hamburg F R Germany 3TR006433AZA Printed in China
18. angle adjustment FOCUS ADJUSTMENT Focus assist F A button H INDICATOR UE BEST PEAK HOLD iy FOCUS Zoom lock knob Focus ring as fe Focus lock knob SON Loosen O Tighten Loosen the zoom lock knob and focus lock knob and adjust the angular field of view in accor dance with the photographic subject by moving the zoom lock knob and focus ring 2 Fasten the zoom lock knob Press the focus assist EA button FOCUS ADJUSTMENT menu will be displayed The focus assist function will be activated to perform the optimum adjustment When the focus ring is positioned near the best focus position the position will automatically be memorized as the PEAK HOLD position The closer the focus ring is positioned to the best focus position the greater the PEAK HOLD value becomes When the focus ring is moved the current focus position will be indicated on INDICATOR Adjust the focus position so that the indicator value goes close to the PEAK HOLD position When the indicator value goes to the best focus position BEST FOCUS will be displayed in reverse at the lower right corner of the screen Fasten the focus lock knob so as to fix the best focus position Press the focus assist F A button again to close the FOCUS ADJUSTMENT menu No operation for 3 minutes also closes the menu Note When shooting the following subjects close the FOCUS ADJUSTMENT menu by pressing
19. e model WW SF332 H 264 MPEG 4 and JPEG triple encoding H 264 MPEG 4 dual stream output and JPEG output can be simultaneously provided Either H 264 or MPEG 4 is selectable Wide dynamic range function This function compensates brightness so that it produces clearer images even if objects have vari ous illumination intensities Important e When the wide dynamic range function is activated noise may be increased in the dark area of the object Auto focus AF function EZ It is possible to adjust the focus automatically by moving the focus ring of the lens with the opera tion button of this camera or the setup menu Focus assist F A function EX EE During the manual focus adjustment this function indicates the best focus position Power over Ethernet function When connecting with a PoE Power over Ethernet device power will be supplied by simply con necting a LAN cable IEEE802 3af compliant Interactive communication with audio By using the audio output connector and the microphone in connector receiving audio from the cameras on a PC and transmitting audio from the PC to the cameras is available SDHC SD memory card slot equipped It is possible to save H 264 videos and JPEG images on the SDHC SD memory card manually at an alarm occurrence or on a web browser It is also possible to save JPEG images at a network failure occurrence Download is possible Recommended SDHC SD memory card es page 42
20. en the cable is quickly connected the power may not be supplied from the PoE device Connection example when connecting to a network using a PoE hub Video monitor Speaker with amplifier for adjustment use only option PoE device hub G o LAN cable category 5 or me better straight STP See LAN cable category 5 or PC Microphone option better straight STP d Speaker with amplifier option E o gt LAN cable category 5 or better straight STP oo ez t Wi Microphone option Video monitor for adjustment use only lt Required cable gt LAN cable category 5 or better straight STP PAL models only Important e The video monitor is used for checking the adjustment of the angular field of view when install ing the camera or when servicing It is not provided for recording monitoring use e Use a switching hub or a router which is compliant with 10BASE T 100BASE TX e Power supply is required for each network camera When using a PoE device hub 12 V DC power supply is unnecessary 27 28 Installation Camera mounting Installation shall be conducted after turning off each device Detach the dome cover Page 18 Connect the cables to the camera es Pages 23 to 27 As necessary use a cable tie accessory to assemble the cables Mount the camera The illustration represents the case in
21. er type microphone option Connect a monaural mini plug 83 5 mm e Supply voltage 2 5 V 0 5 V e Recommended sensitivity of microphone 48 dB 3 dB 0 dB 1 V Pa 1 kHz 23 Important e Connect disconnect the audio cables and turn on the power of the camera after turning off the power of the audio output devices Otherwise loud noise may be heard from the speaker Connect an external speaker with amplifier to the audio output connector for use of the audio transmission function Connect a stereo mini plug 93 5 mm monau ral output e Recommended cable length Less than 10 m 83 Audio output connector Strip range Connect the cables of external devices to the r EXT WO terminal plug accessory When connecting an external device remove 8 mm 9 mm 8mm 9 mm 5 16 11 32 of the outer 5 16 11 32 jacket of the cable and twist the cable core to prevent the short circuit first Specification of cable wire 20 AWG 26 AWG Single core twisted Push down the button of the desired terminal on the external I O terminal plug with a ballpoint pen and release the button when the cable of the external device is fully inserted into the ter minal hole Make sure that the cable is firmly connected to the terminal After the cable connection connect the exter nal I O terminal plug to the external I O termi nals of the camera Check whether the stripped part of the wire is not exposed and is
22. estricting users to those who log in with an authorized user name and password e Apply measures such as user authentication to protect your network against leakage or theft of information including image data authentication information user names and passwords alarm mail information FTP server information and DDNS server information e After the unit is accessed by the administrator make sure to close the browser for added secu rity e Change the administrator password periodically for added security e Do not install the camera in locations where the camera or the cables can be destroyed or damaged by persons with malicious intent Precautions Refer installation work to the dealer Installation work requires technique and experi ences Failure to observe this may cause fire electric shock injury or damage to the prod uct Be sure to consult the dealer Stop the operation immediately when something is wrong with this product When smoke goes up from this product or the smell of smoke comes from this product stop the operation immediately and contact your dealer Turn the power off immediately and contact qualified service personnel for service Do not attempt to disassemble or modify this product Failure to observe this may cause fire or electric shock Consult the dealer for the repair or inspections Do not insert any foreign objects This could permanently damage the apparatus Turn the power off immediatel
23. f the power of this camera and the devices to be connected Check and prepare the required devices and cables for connection Note e Since the connector storage section does not have a suffi cient space use audio cables and a LAN cable that do not exceed the sizes described in the illustrations Example of Example of LAN cable audio cable connector connector Connect the RCA pin cable to the monitor out connector for adjustment only used for adjust ment of the angular field of view Page 16 Important e The monitor out connector for service is provided only for checking the adjustment of the angu lar field of view on the video monitor when installing the camera or when servicing It is not pro vided for recording monitoring use e When checking the adjustment of the angular field of view on the video monitor be sure to use the RCA jack of the main body for connection with video monitor e Black bands may appear at the top and bottom or right and left of the screen That does not affect the adjustment because the angular field of view is not changed e The video output on the monitor for adjustment does not guarantee the video performance or image quality Connect the microphone to MIC LINE IN for Ed use of the audio reception function Se s TE Input impedance Approx 2 KQ Recommended cable length 1 m 8 3 or less for microphone input 10 m 33 or less for LINE input Recommended microphone Plug in pow
24. function or damage data recorded on the SDHC SD memory card Refer to page 22 for descriptions of how to insert remove an SDHC SD memory card e When using an unformatted SDHC SD memory card format it using this camera Recorded data on the SDHC SD memory card will be deleted when formatted If an unformatted SDHC SD memory card or an SDHC SD memory card formatted with other devices is used this product may not work properly or performance deterioration may be caused Refer to the Operating Instructions PDF for how to format a SDHC SD memory card e When some SDHC SD memory cards are used with this product the product may not work properly or performance deterio ration may be caused Use the SDHC SD memory cards recommended in page 42 Code label The code labels accessory are required at inquiry for trouble Use caution not to lose these labels It is recommended to paste one of the labels onto the CD ROM case Discoloration on the color filter of the MOS image sensor When continuously shooting a bright light source such as a spotlight the color filter of the MOS image sensor may have deteriorated and it may cause discoloration Even when chang ing the fixed shooting direction after continu ously shooting a spotlight for a certain period the discoloration may remain MPEG 4 Visual Patent Portfolio License This product is licensed under the MPEG 4 Visual Patent Portfolio License for the personal and non commercia
25. ion within the range of 180 Counterclockwise panning end maker Rotation within the range of 170 Vertical position Tilting Loosen the tilting lock screws x2 and rotate the tilting table to adjust the tilting direction Adjustable range 75 Since a variable focal lens is used it is possible to change the angu lar field of view This lens can also be rotated in the reverse direction but the image azimuth is reversed In this case the image azimuth can be modified when the panning table is rotated to the direction of clockwise panning 180 Focus SST mm so SET CARD LNs lt Lens angular field of view Angle gt f Horizontal 27 7 TELE to 100 3 WIDE Adjustablerange Vertical 20 8 TELE to 73 5 WIDE After adjustment tighten the tilting lock screws x2 to fix the tilting table Recommended tightening torque 0 59 N m 0 44 lbf ft 29 Note e When the camera is used at an angular field of view that is close to horizontal it must be noted that the shadow of the dome cover may be projected Image tilt adjustment Rotate the azimuth adjustment ring to adjust the azimuth angle of the image Adjustable range 100 Adjustable range Adjust the angular field of view and the focus EFE Adjust the angular field of view in accordance with the distance between the camera lens and a photographic subject Auto focus AF button
26. ional SP3 Web browser Windows Internet Explorer 8 0 Microsoft Windows 7 Professional 32 bit 64 bit Windows Internet Explorer 7 0 Microsoft Windows Vista Business SP1 32 bit Microsoft Internet Explorer 6 0 SP3 Microsoft Windows XP Professional SP3 Other CD ROM drive It is necessary to read the operating instructions and use the software on the provided CD ROM DirectX 9 0c or later Adobe Reader It is necessary to read the operating instructions on the provided CD ROM Important e When using a PC that does not meet the above requirements displaying of images may become slower or the web browser may become inoperable e Audio may not be heard if a sound card is not installed on a PC Audio may be interrupted depending on the network environment e Microsoft Windows XP Professional 64 bit Edition is not supported e When using IPv6 for communication use Microsoft Windows 7 or Microsoft Windows Vista Note e Refer to Notes on Windows Vista Windows 7 PDF for further information about system requirements for a PC and precautions when using Microsoft Windows 7 or Microsoft Windows Vista 10 Trademarks and registered trademarks e Microsoft Windows Windows Vista Internet Explorer ActiveX and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries e Intel and Intel Core are trademark
27. l use of a consumer for i encoding video in compliance with the MPEG 4 Visual Standard MPEG 4 Video and or ii decoding MPEG 4 Video that was encoded by a consumer engaged in a personal and non commercial activity and or was obtained from a video provider licensed by MPEG LA to provide MPEG 4 Video No license is granted or shall be implied for any other use Additional infor mation including that relating to promotional internal and commercial uses and licensing may be obtained from MPEG LA LLC See http www mpegla com AVC Patent Portfolio License This product is licensed under the AVC Patent Portfolio License for the personal and noncom mercial use of a consumer to i encode video in compliance with the AVC Standard AVC Video and or ii decode AVC Video that was encoded by a consumer engaged in a personal and non commercial activity and or was obtained from a video provider licensed to pro vide AVC Video No license is granted or shall be implied for any other use Additional infor mation may be obtained from MPEG LA LLC See http www mpegla com 13 14 Precautions for Installation Installation work shall be performed in accordance with the technology standard of the electric installation This camera is designed to be used indoors This product is not operable outdoors Do not expose this camera to direct sunlight for hours and do not install the product near a heater or an air conditioner
28. nic IP setting software is inoperable in other subnets via the same router e This camera cannot be displayed or set with an older version of the IP setting software version 2 XX Start the Panasonic IP setting software Click the IP setting button after selecting the MAC address IP address of the camera to be configured Note e When using a DHCP server the IP address assigned to the camera can be displayed by clicking the Refresh button of the IP setting software e When a duplicate IP address is used the corre sponding MAC address IP address will be dis played shaded Complete each network setup item and click the Apply button Note e When using a DHCP server it is possible to set DNS to AUTO Important e It may take for around 2 minutes to complete to upload the settings to the camera after clicking the Apply button The settings may be invalidated when the 12 V DC power supply is cut or when the AC adaptor or the LAN cable is disconnected before completing the upload In this case perform the settings again e When using a firewall including software allow access to all UDP ports 37 38 Troubleshooting Before asking for repairs check the symptoms with the following table Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below e Reference symotom Die slg
29. nne erkl ringen gjelder for er i overensstemmelse med f lgende normer eller andre normgivende dokumenter som f lger bestemmelsene i direktivene 2006 95 EC og 2004 108 EC Contents Important safety instructions Limitation of Iabilttv Disclaimer f war Speed eege a E SS A O a a RO Main functions ii atan 7 About MOtatlons EE 7 About the user manual Simi idos 8 System requirements for a DC 9 Trademarks and registered trademarks A 10 NN 10 NotWork SECU Vii ea 10 A ed EEGENEN 11 Precautions tor Installation cuotas NEE ENEE 14 Major operating controls sain a RRR Rs a 16 Detaching the dome COVE seed deed ENEE dE EEN EE cwenyeds dee ENEE 18 Klee 19 Insert remove an SDHC SD Memory Card 22 Connection Installation Adjustment Attaching the dome cover 1 34 Configure the network settings 1 36 Troubleshooting ssssesseeeeeeeeeeeeeeeee 38 Specifications eee 39 Standard accessorles we 42 Optional accessories 72 8 hadi oS il 42 Important safety instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instruc tions 8 Do not install near any heat sources such as radiators heat registers stoves or other appara tus including amplifie
30. nsabilidad que el producto a que hace referencia esta declaraci n est conforme con las normas u otros documentos normativos siguiendo las estipulaciones de las directivas 2006 95 CE y 2004 108 CE Noi dichiariamo sotto nostra esclusiva responsabilita che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive 2006 95 CE e 2004 108 CE Wij verklaren als enige aansprakelijke dat het product waarop deze verklaring betrekking heeft voldoet aan de volgende normen of andere normatieve documenten overeenkomstig de bepalingen van Richtlijnen 2006 95 EC en 2004 108 EC Vi erkl rer os eneansvarlige for at dette produkt som denne deklaration omhandler er i overensstemmelse med standarder eller andre normative dokumenter i f lge bestemmelserne i direktivene 2006 95 EC og 2004 108 EC Vi deklarerar h rmed v rt fulla ansvar f r att den produkt till vilken denna deklaration h nvisar r i verensst mmelse med de standarder eller andra normativa dokument som framst lls i direktiv nr 2006 95 EC och 2004 108 EC Ilmoitamme yksinomaisella vastuullamme ett tuote jota t m ilmoitus koskee noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja jotka noudattavat direktiivien 2006 95 EC ja 2004 108 EC s d ksi Vi erkl rer oss alene ansvarlige for at produktet som de
31. otherwise arise from inappropriate waste handling For more information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation For business users in the European Union If you wish to discard electrical and electronic equipment please contact your dealer or supplier for further information Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and ask for the correct method of disposal Note for the battery symbol bottom two symbol examples This symbol might be used in combination with a chemical symbol In this case it complies with the requirement set by the Directive for the chemical involved For U S and Canadian fields Panasonic System Networks Company of America Unit of Panasonic Corporation of North America www panasonic com business For customer support call 1 800 528 6747 Three Panasonic Way Secaucus New Jersey 07094 U S A Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 Canada 905 624 5010 www panasonic ca O Panasonic System Networks Co Ltd 2010 Ns0410 0 1 For European and other fields P
32. pages When using DC power supply e Is 12 V DC power supply connect to the power supply terminal Check whether the connection is appropriately established e Is the AC adaptor in use compliant with the Specifications Check the Specifications regarding AC adaptor When using a PoE device for power supply e Are the PoE device and the network connector on the rear of the camera connected using a LAN cable 4 pair Check whether the connection is appropriately established es Depending on the PoE device the power supply will stop when the demanded power exceeds its total power limit for all PoE ports Refer to the operating instructions of the PoE device in use Power is not turned on E 25 26 Specifications O Basic Power source Power consumption Ambient operating temperature Ambient operating humidity Monitor output for adjusting the angular field of view External WO terminals Microphone Line input For microphone input For line input Audio output Dimensions Weight Finish O Camera Image sensor Effective pixels Scanning area Scanning system Minimum illumination 12 V DC PoE IEEE802 3af compliant WV SF336 12 V DC 320 mA PoE 4 2 W Class 2 device WV SF335 WV SF332 12 V DC 280 mA PoE 3 5 W Class 2 device FOR UL LISTED MODEL S ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY 10 C to 50 C 14 F to 122 F no condensation
33. r It is recommended to use a screen saver When an error is detected this product will restart automatically This product will be inoperable for around 2 minutes after the restart just as when the power is turned on Product disposal transfer Images saved on the SDHC SD memory card may lead to personal information leakage When it is necessary to dispose or give this product to someone even when for repair make sure that there is no data on the hard disk drives Cleaning this product body Be sure to turn off the power before cleaning Do not use strong abrasive detergent when cleaning this camera Otherwise it may cause discoloration When using a chemical cloth for cleaning read the caution provided with the chemical cloth product When the dirt is hard to remove use a mild detergent and wipe gently When the dirt is hard to remove use a mild detergent and wipe gently Then wipe off the remaining detergent with a dry cloth Cleaning the lens Use a lens cleaning paper used to clean cam era lenses or lenses of spectacles When using solvent use an alcohols solvent and do not use a thinner or a glass cleaner Transmission interval Image transmission interval may become slow depending on the network environment PC performance shooting subject access num ber etc About SDHC SD memory card e Before inserting the SDHC SD memory card turn off the power of this product first Otherwise it may cause mal
34. r adjusted gt indicator F A indicator Tilting lock screw Lights when the focus assist function is activated or when the focus ring is positioned near the best focus position E ES External I O terminals Audioroutput connector About the INITIAL SET button After turning off the power of the camera turn on the power of the camera while holding down this button and wait for around 5 seconds or more without releasing this button Wait around 2 minutes after releasing the button The camera will start up and the settings including the network settings will be initialized Before initializing the settings it is recommended to write down the settings in advance 17 Detaching the dome cover Important e After removal retain the dome cover fixing screw so as not to lose The screw is required when attaching the dome cover Page 34 e Remove the cover film from the dome section of the dome cover after the installation is com plete Do not touch the dome section by hand directly after removing the cover film Remove the dome cover fixing screw M3 step screw x1 Dome cover fixing screw M3 step screw Rotate the dome cover counterclockwise two steps and align the indication OPEN to the maker of the camera to detach the dome cover Dome alignment CH indication OPEN Dome cover Dome section 18 When installing the camera on a wall or a ceiling the
35. re are four methods as specified below Pages 20 and 21 e Using the two gang junction box e Installing the camera directly on the ceiling or wall e Using the optional ceiling mount bracket WV Q168 for embedded installation on a ceiling e Using the optional ceiling mount bracket WV Q105 for direct mounting on a ceiling Important e Procure 4 screws M4 to secure the camera to a wall or a ceiling according to the material of the installation area In this case wood screws and nails should not be used For mounting a camera on a concrete wall use an anchor bolt for M4 or an AY plug bolt M4 for securing Recommended tightening torque 1 6 N m 1 18 lbf ft e Required pull out capacity of a single screw bolt is 196 N 44 lbf or more e f a ceiling board such as plaster board is too weak to support the total weight the area shall be sufficiently reinforced or the optional ceiling mount bracket for the camera WV Q105 must be used The mounting conditions of the camera are described as follows Installation Applicable mount Recommended Number of Minimum pull out place bracket screw screw strength per 1 pc Ceiling wall Two gang junction M4 4 pcs 196 N 44 lbf box Ceiling wall Direct mounting M4 4 pcs 196 N 44 lbf Ceiling WV Q168 approx 2 280 g 0 8 lbs Ceiling WV Q105 approx 2 150 g 0 8 lbs 1 PAL models only 2 Make sure that the installed mount bracket can suppor
36. riangle is intended to alert the user to the presence of uninsulated dangerous volt age within the product s enclo sure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instruc tions in the literature accompa nying the appliance Power disconnection Unit with or without ON OFF switches have power supplied to the unit whenev er the power cord is inserted into the power source however the unit is operational only when the ON OFF switch is in the ON position Unplug the power cord to disconnect the main power for all units For Canada This Class A digital apparatus complies with Canadian ICES 003 For U S A NOTE This equipment has been tested and found to comply with the limits for a Class A digi tal device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ ment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction man ual may cause harmful interference to radio com munications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
37. rs that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combi nation to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Limitation of liability THIS PUBLICATION IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
38. s or registered trademarks of Intel Corporation in the United States and other countries e Adobe the Adobe logo and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries e SDHC logo is a trademark e Other names of companies and products contained in these operating instructions may be trademarks or registered trademarks of their respective owners About copyright and license Distributing copying disassembling reverse compiling reverse engineering and also exporting in violation of export laws of the software provided with this unit are expressly prohibited Network security As you will use this unit connected to a network your attention is called to the following security risks Leakage or theft of information through this unit 2 Use of this unit for illegal operations by persons with malicious intent 7 Interference with or stoppage of this unit by persons with malicious intent It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks e Use this unit in a network secured by a firewall etc e If this unit is connected to a network that includes PCs make sure that the system is not infect ed by computer viruses or other malicious entities using a regularly updated anti virus pro gram anti spyware program etc e Protect your network against unauthorized access by r
39. securely connected External I O terminal plug External I O terminals lt Ratings gt GND 2 AUX OUT ALARM IN ALARM OUT Important e Do not connect 2 wires or more directly to a terminal When it is necessary to connect 2 wires or more use a splitter Connect an external device with verifying that the ratings are within the specifications above e When using the EXT I O terminals as the output terminals ensure they do not cause signal col lision with external signals e ALARM OUT AUX OUT Output specification Open collector output maximum applied voltage 20 V DC Open 4 V 5 V DC by internal pull up Close Output voltage 1 V DC or less 60 mA or less e ALARM IN Input specification No voltage make contact input 4 V 5 V DC internally pulled up OFF Open or 4V 5V DC ON Make contact with GND required drive current 1 mA or more Connect a LAN cable category 5 or better Network connector straight STP to the network connector PAL models only D Connect the power supply Important e The 12 V DC power supply shall be insulated from the commercial AC power When using 12 V DC power supply Loosen the screw of the power cord plug accessory Connect the cable of the 12 V DC power sup ply to the power cord plug _ keck Strip 3 mm 7 mm 1 8 9 32 from the end GND 12 V DC of the wire and twist the stripped part of the wire sufficiently to avoid short circ
40. t more than 5 times of the weight of the camera 19 20 Using the side cable access hole When installing the camera directly on the ceiling or wall with cables exposed or when using the optional ceiling mount bracket WV Q168 cut out a portion of the dome cover to open a cable access hole Side cable access hole Side cable access hole Method of camera installation Using the two gang junction box Mount the camera on the two gang junction box by fixing 4 screws locally procured Page 28 Screws rae locally procured Installing the camera directly on the ceiling or wall Place the installation template label accessory on the ceiling or wall and make a hole to pass the cable Remove the template label and mount the camera by fixing 4 screws locally procured Page 28 Side cable access hole Direction marker for installation_4 Recommended screw M4 4 pcs 4 e W ch Ss gt V SA E a Y SC 1120 mm 13 16 gt PT Screws 2 A D locally procured 83 5 mm 3 5 16 Installation template label accessory Using the optional ceiling mount bracket WV Q168 It is possible to reduce the exposed portion of the camera body using the optional ceiling mount bracket Refer to WV Q168 Operating Instructions or Installation es page 28 for how to mount the camera Using the optional ceiling mount bracket WV Q105 PAL models only Refer to WV Q105 Operating Instructions
41. the Operating Instructions PDF for further information about the port forwarding function Time amp date setting It is necessary to set the time amp date before putting this product into operation Refer to the Operating Instructions PDF for further informa tion about the time amp date setting 15 Major operating controls 16 Dome cover Ze WC NW Inner dome Clear dome l N Provided only for service Monitor out connector for Direction marker for installation service Azimuth adjustment ring Marker Monitor out connector for adjustment RCA jack View from the side ACS Panning lock screw LOC Tilting table 12 V DC power supply terminal Panning table By This connector is provided only for service Do not use the connector for checking the adjust ment of the angular field of view on the video monitor lt Side view gt SDHC SD memory card slot r Access indicator blinking at accessing Link indicator lighting at linking Focus assist F A Auto focus AF INITIAL SET button button EZ E SDHC SD memory card error indicator AF indicator Blinks when AF is being SDHC SD memory card erro
42. the focus assist F A button again or adjust the focus to obtain the best focus position while monitoring images from the camera e Subj moving frequently or having large illuminance change e Subj with low illuminance e Subj with reflection or extra brightness e Subj through a window e Place where the lens easily becomes dirty Subj with less contrast such as white wall e Subj with heavy flicker If the zoom lock knob is slightly fastened before the zoom ring is moved the ring will become stable to ease the fine adjustment If the focus lock knob is slightly fastened before the focus ring is moved the ring will become stable to ease the fine adjustment In case the angular field of view has changed during adjustment close the FOCUS ADJUSTMENT menu once by pressing the focus assist F A button When the angular field of view changes the indicator values of PEAK HOLD and INDICATOR also change After fixing the angular field of view retry Step 3 33 34 Attaching the dome cover Align the indication OPEN to the maker of the camera to attach the dome cover alignment indication Sea OPEN 2 NE Dome cover Dome section Remove the cover film from the dome cover except the dome section Adjust the direction of the inner dome page 16 Rotate the dome cover clockwise to adjust the marker to ADJUST The clear dome and the inner dome can rotate together in this state Rotate the
43. the provided CD ROM e Panasonic IP setting software Configure the network settings of the camera Refer to the following for further information e Viewer Software Network Camera View 4 It is necessary to install the viewer software Network Camera View 4 to display images on a PC Install the viewer software by double clicking the nwcv4setup exe icon on the provided CD ROM Configure the network settings of the camera using the Panasonic IP setting software It is possible to perform the network settings of the camera using the IP setting software on the provided CD ROM When using multiple cameras it is necessary to configure the network settings of each camera independently If the Panasonic IP setting software does not work configure the network settings of the camera and the PC individually on the Network page of the setup menu Refer to the Operating Instructions PDF for further information Important e When using Microsoft Windows Vista the Windows Security Alert window may be displayed when starting the IP setup software In this case disable User Account Control from the con trol panel In this case disable User Account Control from the control panel e For the security enhancement the MAC address IP address of the camera to be configured will not be displayed when around 20 minutes have passed after turning on the power of the cam era When the effective period is set to 20 minutes in the IP setup e Panaso
44. this may cause a drop result ing in injury or accidents Do not strike or give a strong shock to this product Failure to observe this may cause fire or injury Do not rub the edges of metal parts with your hand Failure to observe this may cause injury Turn the power off when do wiring of this product Failure to observe this may cause electric shock In addition short circuit or wrong wiring may cause fire 11 12 Turn the power off when cleaning of this product Failure to observe this may cause injury Precautions for use This product is designed to be used indoors This product is not operable out doors This product has no power switch When turning off the power turn off a circuit breaker To keep on using with stable performance Do not use this camera in hot and humid con ditions for a long time Failure to observe this causes component deg radation resulting in life shortening of this prod uct Recommended operating temperature 35 C 95 F or lower Do not expose this camera to direct heat sources such as a heater Do not touch the dome cover with your bare hands A dirty dome cover causes deterioration of pic ture quality Handle this camera with care Do not drop this camera nor apply shock or vibration to this camera Failure to observe this may cause trouble About the PC monitor Displaying the same image on a CRT type monitor for a long time may damage the moni to
45. uit Specification of cable wire SAN 16 AWG 24 AWG Single core twisted e Check whether the stripped part of the wire is 90 not exposed and is securely connected Tighten the screw of the power cord plug e Connect the power cord plug to the 12 V DC 12 V DC power cord power supply terminal plug accessory FOR UL LISTED MODEL S ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY 26 Important e Be sure to use the power cord plug provided with this product e Be sure to fully insert the power cord plug into the 12 V DC power supply terminal accessory Otherwise it may damage the camera or cause malfunction e Be sure to use an AC adaptor compliant with the Specifications regarding power source and power consumption amp page 39 Run the 12 V DC output cable through the gap of the cable hook 12 V DC output cable Cable hook When using PoE IEEE802 3af compliant Connect a LAN cable category 5 or better straight STP between a PoE device Such as a hub and the network connector of the camera PAL models only Important e Use all 4 pairs 8 pins of the LAN cable e The maximum cable length is 100 m 328 e Make sure that the PoE device in use is compliant with IEEE802 3af standard e When connecting both the 12 V DC power supply and the PoE device for power supply PoE will be used for power supply e When disconnecting the LAN cable once reconnect the cable after about 2 seconds Wh
46. y and contact qualified service personnel for service Select an installation area that can sup port the total weight Selecting an inappropriate installation surface may cause the product to fall down or topple over resulting in injury Installation work shall be started after sufficient reinforcement Periodic inspections shall be conducted Rust on the metal parts or screws may cause a fall of the product resulting in injury or acci dents Consult the dealer for the inspections Do not use this product in an inflammable atmosphere Failure to observe this may cause an explosion resulting in injury Avoid installing this bracket in the loca tions where salt damage occurs or corro sive gas is produced Otherwise the mounting portions will deterio rate and accidents such as a fall of this product may occur The exclusively designed mount bracket shall be used Failure to observe this may cause a drop result ing in injury or accidents Use the exclusively designed mount bracket for installation The screws and bolts must be tightened to the specified torque Failure to observe this may cause a drop result ing in injury or accidents Do not install this product in locations subject to vibration Loosening of mounting screws or bolts may cause a fall of the product resulting in injury Install this product in a location high enough to avoid people and objects from bumping the product Failure to observe

Panasonic WV-SF332 Installation Guide

Contents

Download Pdf Manuals

Related Search

Related Contents