One Stop Gardens Landscape Lighting 91072 User's Manual
Contents
1. SMILING FROG SOLAR LIGHT ilele3191072 ASSEMBLY amp OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http www harborfreight com Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL Copyright 2004 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions or replacement parts please call 1 800 444 3353 THANK YOU for choosing a HARBOR FREIGHT TOOLS product For future reference please complete the owner s record below Model Serial No Purchase Date SAVE THE RECEIPT WARRANTY AND THESE INSTRUCTIONS It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly Technical Specifications Construction Poly styrene Frog and Lily Pad Amorphous Solar Panel Water Resistant Batteries 2 AA Rechargeable Ni CD Dimensions 8 25 Diameter x 8 75 High Weight 3 LBS Run Time 8 Hours When Fully Charged l IMPORTANT SAFETY INSTRUCTIONS A READ ALL INSTRUCTIONS BEFORE USING THIS PRO2. not available individually as replacement parts Assembly Parts Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO SKU 91072 Page 5
3. DUCT Safety Warnings and Precautions WARNING When using product basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this product 1 Keep work area clean Cluttered areas invite injuries 2 Observe work area conditions Keep work area well lit Position the Smiling Frog Solar Light in an unobstructed area that receives sunlight at least six hours a day 3 Store idle equipment When not in use products must be stored in a dry location to inhibit damage from moisture and salt air 4 Check for damaged parts Before using any product any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for any broken or damaged parts and any other conditions that may affect its operation Replace or repair damaged or worn parts immediately Do not use the Solar Light if any switch does not turn on and off properly 5 Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty 6 Always check hardware and assembled parts after assembling All connections should be tight and hardware tightened 7 Keep children away Children must never be allowed in the work area Do not let them handle the Solar Light REV 08k SKU 91072 Page 2 10 11 12 13 14 15 16 17 18 Dress p
4. ht causing a decrease or stoppage of efficiency in recharging the batteries WARNING NiCad batteries must be disposed of properly Do not incinerate Batteries may burst causing personal injury and or property damage Contact your local hazardous waste disposal authority for proper disposal WARNING The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Assembly Operation Your Smiling Frog Solar Light comes completely assembled The Smiling Frog Solar Light requires special conditions for set up and operation It is important that you read the entire manual to become familiar with the product BEFORE you use the Smiling Frog Solar Light Before operating the Smiling Frog Solar Light be sure that you have all parts described in the Parts List and Assembly Diagram located on the last pages of this manual 1 Decide where you want to place the Smiling Frog Solar Light Choose a location that receives full direct sunlight a minimum of six hours a day The location should not be near nighttime light sources such as porch lights or streetlights as this will cause the Solar Light to remain off SKU 91072 Page 3 The Smiling Frog Solar Light must be set on a flat even and stable surface The Sm
5. iling Frog Solar Light is water resistant to protect against normal daily elements The Smiling Frog Solar Light is not waterproof and must not be set in water such as pools or ponds 2 The Smiling Frog Solar Light will need to charge for at least six hours before using it for the first time 3 Located on the bottom of the Smiling Frog Solar Light is a panel with a ON OFP Button 1 see Figure 1 Pressing down on the ON OFF Button 1 will turn the Smiling Frog Solar Light on or off After the initial charge Step 2 is set check to see that the Light 3 is on by viewing the Smiling Frog at night or in a dark location If the Light 3 is not lit press the ON OFF Button 1 again until it is in the ON position see Figure 1 ON OFF Button 1 Phillips Head Phillips Head Screw 4 Screws 4 ON OFF Button 1 x Top Panel 5 Note During the day the Solar Panel 2 converts sunlight into electricity recharging the batteries The amount of light the Solar Panel 2 receives depends on placement of the Smiling Frog Solar Light geographic location and weather If the weather is cloudy and the panel did not receive a full charge the Smiling Frog Solar Light may not achieve the full eight hours of operating time It will catch up on its own after two to three days of full sun Replacing the Batteries NOTE Before performing any maintenance make sure the ON OFF Switch 1 i
6. roperly Protective electrically nonconductive clothes and nonskid footwear are recommended when working with the Smiling Frog Solar Light Wear restrictive hair covering to contain long hair Use eye protection Always wear ANSI approved impact safety goggles when setting up this product Maintain products with care Keep the Solar Light clean for better and safer performance Follow instructions for set up and changing batteries Inspect the Solar Light periodically if damaged have it repaired by an authorized technician Do not overreach Keep proper footing and balance at all times Use the right Solar Light for the job Do not attempt to force a small Solar Light to do the work of a larger Solar Light There are certain applications for which this Solar Light was designed Do not modify this Solar Light and do not use this Solar Light for a purpose for which it was not intended Do not set up the Solar Light if under the influence of alcohol or drugs Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs If there is any doubt do not set up the Smiling Frog Solar Light Use only Batteries of the type recommended Do not mix old and new batteries Batteries should all be Nickel Cadmium Remove batteries if the Smiling Frog Solar Light is not used for a long period of time Keep the Solar Panel free of dirt dust and grime Dust covering the Solar Panel will block out sunlig
7. s in the OFF position I Located on the bottom of the Smiling Frog Solar Light is a panel held in place with four small Phillips Head Screws 4 see Figure 1 Place the Smiling Frog Solar Light over a working surface that is flat and clear of debris so that you may easily retrieve the Phillips Head Screws if they are dropped Using a small Phillips Head screwdriver not included remove each of the Phillips Head Screws 4 Place the Phillips Head Screws 4 in a secure location Pull off the Top Panel 5 of the Battery Compartment 2 Remove the Rubber Panel 6 from the Battery Compartment see Figure 2 Pull out the Batteries 7 and replace with two new Batteries 7 see Figure 3 Caution Make certain that the batteries are installed with the positive and negative poles as indicated Use Ni Cad Batteries only SKU 91072 Page 4 7 3 Replace the Rubber Panel 6 and the Top Panel 5 of the Battery Compartment Thread back in all four 4 Phillips Head Screws 4 Unpacking When unpacking the Smiling Frog Solar Light check to make sure the following parts are included If any parts are missing or broken please call HARBOR FREIGHT TOOLS at 1 800 444 3353 Parts List Part Description Quantity Part Description Quantity 1 ON POFF Button 1 5 Top Panel 1 2 Solar Panel 1 6 Rubber Panel 1 3 Light 1 7 Batteries 2 4 Phillips Head Screws 4 Note Some parts are listed and shown for illustration purposes only and are
Download Pdf Manuals
Related Search