Home

One For ALL URC 9800 User's Manual

1. D lt gt gt HE gt Tog D HIONA 2 INSTALLING THE BATTERIES 3 USING YOUR HOME 4 Features and Functions SETTING THE CLOCK inant QUICK SET UP 8 SETTING UP INDIVIDUAL HOME ENTERTAINMENT COMPONENTS 10 To Set Up Your Televisio Msiri 10 To Set Up Your VCR or TV VCR Combinations 12 To Set Up Your Cable BOX c issssccccstsssacesscsssssnecssctetsesnersesestvesaeesesas 15 To Set Up Your DSS or Satellite 16 To Set Up Your DVD or LD 18 To Set Up Your CDsor MD Player mirusius 19 To Set Up Your Tuner Receiver a2 Set Up Your Ample n R 22 SETTING UP ADDITIONAL HOME ENTERTAINMENT COMPONENTS 24 Re Assigning Device Keys 25 SEARCHING FOR YOUR CODE i Finding Your SETTING UP THE HOME THEATER MODE KEY 29 Power Key 31 LEARNING FUNCTIONS ONTO THE 1L THROUGH 6L 32 D
2. Once the Home Producer has learned all desired features press and release ESC to exit out of learning mode 11 To test a new feature press and release a desired device key fol lowed by the 1 6 L key where a corresponding feature was learned 34 Deleting Functions from the L keys 1 Device Key Press and release the Device key e g VCR where you want Home Producer to learn new feature s Press and hold SETUP until the display screen changes from the device you selected e g VCR and the TIME to TIMED SEQ 0 gt lt Press MENU twice the display will change to CONFIGURE Press SELECT the display will change to THEATR SEL Press MENU twice the display will 2 change to IR LEARNER Press SELECT the display screen will change to IR LEARN Press MENU once and the screen will change to IR DELETE Press and release SELECT The display screen will now change to KEY MODE Press and release SELECT 6 lt amp Press and release the Device key which holds the learned feature you want to delete e g TV Then press and release the 1 6 L key you want to delete The Display will read DELETED 7 You can now repeat steps 5 and 6 to continue deleting any and all learned features 8 Press the ESC key to return to the main display DEVICE and the TIME 35 SETTING UP TIMED SEQUENCES RECORDING WHEN YOU ARE NOTHOME
3. The SWAP key swaps the Picture in Picture window and the main picture 0 MOVE PIP key moves the Picture in Picture window around your TV screen The MENU key operates the same as the MENU or OSD On Screen Display key on your original re mote Use the MENU Up MENU Down Left Right gt to navigate through your menus If your original remote control had a Select Enter key for use in your menu use SELECT or ENTER 45 MENU MENU 53 The PROG key SHIFT MENU operates your secondary menus Use the MENU Up MENU Down Left and Right to navigate through your menus If your original remote control had a Select Enter key for use in your menu use SELECT or ENTER The SELECT key is used to make selections in the LCD Screen menu It is also used to make selections in your on screen TV menus The CLEAR key SHIFT SELECT is used to exit or cancel selections in your on screen TV menus The MENU Up MENU Down 9 Left and Right are used to navigate through your on screen menus MENU and MENU are also used to navigate through the LCD Screen menu The VCR transport keys i e PLAY REW FF STOP PAU and REC access the features of your VCR The SLEEP key SHIFT MUTE accesses the sleep timer on your TV Even if your TV does not have a sleep timer the Home Producer can access it
4. Press SELECT the display screen will change to IR LEARN Press SELECT again gt lt 5 The display screen will change from IR LEARN to VCR Home Producer is now ready to learn new features NOTE At this point you can press a different device key e g TV to learn features in a different mode 6 Device Key Press and release the Device key e g TV in which you would like to learn your new function NOTE Steps 7 through 9 need to be completed within 10 seconds Please read the next three steps before proceeding 33 7 _ Press and release the 1 6 key where you want to assign a compo nent s feature The Home Producer s red light will flash rapidly 8 Place your original remote control about 2 inches apart nose to nose from the Home Producer NOTE If the Home Producer has trouble learning a feature try moving your original remote control to the left or right during the learning process position of the IR LED transmitter on your original remote control may be offset 9 On your original remote control press and hold the key feature you want learned until the red light on the Home Producer blinks twice and the display will read SUCCESS If the red light on the Home Producer does not blink twice or the display reads ERROR stop and repeat step 7 to 9 NOTE You can now repeat steps 6 through 9 to learn additional functions on the other 1 6 L keys and in different modes
5. The Home Producer is equipped with a special fea ture that lets you set up a sequence of key strokes that can be played back at a specified time up to seven days in advance You can use this feature to record from your DSS satellite turn on your infrared home automation lighting system when you are not home or any other series of keystrokes that you would like to play back at a later time The Home Producer can store up ten sequences in the memory with each sequence having a maximum of 15 key strokes For example to set up the remote to record a program off of your DSS receiver 1 Press and hold SETUP until the display screen changes from DEVICE and the TIME to TIMED SEQ Press SELECT The display will change to ADD MACRO Press SELECT again 2 001 The display will change to START and the TIME with the first digit of the TIME blinking Enter either a 0 1 then the next digit in the time will begin to blink continue entering the time until all four digits of the time have been set Next AM PM will blink Press MENU to toggle between AM and PM Choose one and press SELECT MENU The display will change to ONCE Use MENU to toggle through ONCE DAILY or WEEKLY depending on when and how often you want the sequence to play Choose one and press SELECT MENU The display will change to the day of the week on which the sequence will begin Use MENU to toggle through
6. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user s authority to operate his equipment FCC authorization Label This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation FCC ID Home Producer DI2 9800 Command Center FE SPEC IHCATIONS Remote Powel 4 AAA Batteries RF Command Console Power 120 Volts AC Remote to RF Command Console Range 100 Feet 30 48m RF Command Console to Device Range 25 Feet 7 62m 30 Remote Dimensions 9 3 8 x 2 7 8 x 1 3 8 4 in RF Command Console Dimensions 1 9 16 x 5 1 16 4 in Remote Weight without 8 oz 220g RF Command Console 10 4 2 300g Specifications are typical Individual units might vary Specifications are subject to change and improvement without notice 49 TROUBLESHOOTING Problem Solution LCD screen begins to Replace the batteries with fade does not appear four 4 new AAA alkaline or the red light blinks batteries five time
7. They are list ed above the keys that they are mapped to For example on the transport keys PLAY REW FF STOP and PAUSE there are the following fea tures SLOW SLOW SLOW X2 and EJECT If you want to eject a tape from your VCR press SHIFT STOP This will eject your tape as long as your original remote supported this feature NOTE Once you have pressed the SHIFT key Home Producer will remain in the Shift mode as indicated by an S on the LCD screen for 5 seconds after the last key press or until the SHIFT key is pressed again The following keys have functions that are shifted CENTER SHIFT CENTER REAR MENU SHIFT MENU PROGRAM SELECT SHIFT SELECT CLEAR MUTE SHIFT MUTE SLEEP PREV CH SHIFT PREV CH DISPLAY PIP SHIFT PIP FREEZE PIP REW SHIFT REW SLOW PLAY SHIFT PLAY SLOW FF SHIFT FF SLOW STOP SHIFT STOP EJECT PAUSE SHIFT PAUSE X2 IMPORTANT For a more detailed explanation of what function each shifted key performs by device type e g TV VCR etc please refer to pages 52 through 64 40 HOW TO USE THE SLEEP KEY The Home Producer has a SLEEP key that either operates your component s sleep timer or if your component does not have a sleep timer it activates the Home Producer s built in sleep timer after you activate SLEEP LOCK see below To use the Home Producer s SLEEP key press SLEEP i e SHIFT MUTE If your component does not h
8. Totevision 0042 0149 0077 0105 Unitech 0106 0202 Vector Radio Shack 0000 1037 Radix 0037 Randex 0037 Videosonic Realistic 0035 0037 0048 0047 Wards 0000 0104 0062 0046 0066 Ricoh 0034 0253 Runco 0039 STS 0042 XR 1000 Samsung 0240 0045 Yamaha Sanky 0048 0039 Zenith 0000 0067 0041 0271 0479 0047 0240 0104 0046 0184 0045 0121 0043 0210 0212 0035 0037 0047 0000 0042 0104 0046 0054 0066 0105 0045 0048 0062 0072 0240 0035 0072 0035 0032 0000 0033 0034 0253 0253 0035 0081 0000 0043 0110 0000 0593 0240 0036 0208 0041 0000 0041 0060 0035 0039 0162 0202 0035 0037 0000 0000 0045 0043 0066 0210 0212 0037 0240 0240 0045 Vector Research 0038 0040 Video Concepts 0045 0040 0061 0240 0060 0035 0048 0047 0081 0240 0045 0000 0042 0072 0149 0062 0212 W Westinghouse 0278 0035 0000 0072 0041 0038 0039 0000 0033 0034 0479 Set Up Codes for TV VCR Combinations American High 0035 TV 0051 Panasonic Brocksonic 0002 0294 0479 Colt 0072 Penney s Curtis Mathes 0035 TV 0051 Daewoo 0278 TV 0451 Quasar Emerson 0002 0294 0479 Funai 0000 RCA GE 0035 TV 0051 0060 TV 0047 0048 TV 0093 0240 Sansui Hitachi 0035 TV 0051 0000 Sanyo HQ 0000 Sears Lloyds 0000 Sony Magnavox 0000 0035 TV 0051 Symphonic 0081 TV 0054 Zenith Magnin 0240 Memorex 0037 0162 TV 0250 MGA
9. radio frequency transmissions NOTE The tests for range limits of the Home Producer and the Command Center were conducted in open air distance tests Actual distance of the signal will be based on the construction of the building the unit is being used in as well as other factors such as outside interference 48 WTH THE FCC RULES AND REGULATIONS This equipment has been tested and found to comply with the limits for a class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and radiates radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be deter mined by turning the equipment off and on the user is encour aged to try and correct the interference by one or more of the fol lowing measures e Reorient or relocate the receiver antenna e Increase the separation between the equipment and the receiver Connect the equipment into an outlet that is different from that to which the receiver is connected e Consult the dealer an experienced radio television techni cian for help
10. tte Decks Optimus 0027 0220 0337 0439 Panasonic 0229 Philips 0029 Pioneer 0027 0220 0099 Revox 0190 Sansui 0029 0009 Sherwood 0337 Sony 0243 0170 0291 Teac 0308 Technics 0229 Victor 0273 Wards 0027 Yamaha 0097 0094 Automation Radio Shack 0240 Security System 0167 Universal X10 0167 X10 0167 Set Up Codes for Digital Audio Tape Carver 0158 Marantz 0158 Denon 0031 Philips 0158 Harman Kardon 0158 Sony 0093 Magnavox 0158 Set Up Codes for Turntables Aiwa 0188 Marantz 0188 Carver 0188 Philips 0188 Magnavox 0188 Sony 0348 Set Up Codes for Video Accessories 0160 0850 0171 Archer 0160 Philips Web TV 0818 GC Electronics 0160 RadioShack Jebsee 0160 Sony Web TV Magnavox TeleCaption Web TV 0818 Set Up Codes for Miscellaneous Audio Aiwa 0010 0159 0404 RCA 0056 Fisher 0052 SSI 0317 Harman Kardon 0477 Schneider 0376 JBL 0477 Scientific Atlanta 0460 JVC 0073 Sony 0010 0159 Jerrold 0459 0520 Soundesign 0376 Nikko 0376 Starcom 0459 Paramount Pict 0317 Yorx 0376 27 SEARCHING FOR YOUR CODE If your components do not respond to the Home Producer after trying all of the codes listed for your brand or if your brand is not listed at all try search ing for your code For example after trying all of the codes for your brand of TV you still cannot get the Home Producer to operate your TV then 1 2 MENU Press release the TV key Press and hold SETUP until the
11. 0163 0039 0309 0208 0518 0074 0158 0014 0189 0080 0042 0054 0176 0186 0195 0857 NOTES May use Amplifier code 0013 for power and volume See below section for amplifier setup and codes use Miscellaneous Audio code 0159 to operate surround and tuner presets See page 24 for misc audio setup and codes To Set Up Your Amplifier NOTE If the four digit code for your device begins with a 0 only the last three numbers of your code will be displayed 1 Turn on your Amplifier Press and release the AMP key 3 Press and hold SETUP until the display screen changes from AMP and the TIME to TIMED SEQ 4 Press the MENU key one time DEV SET UP The display screen will change to CODE SETUP Press SELECT The display will change to 23 To Set Up Your Amplifier cont 5 Press SELECT and the display screen will change to AMP 6 Enter the first Amplifier code listed for your brand in the Set Up Codes for Amplifiers on the page 23 then press SELECT Aim the remote control at the Amplifier and press POWER Your Amplifier should turn OFF Press the ESC key to return the display to AMP and the TIME If your Amplifier does not turn OFF enter the next code in the code list then press SELECT followed by POWER Once the cor rect code is entered press the ESC key to return the display to AMP and the TIME For a detailed explanation of what function ea
12. Logik MGA MGN Technology MTC Magnasonic Magnavox Magnin Marantz Marta Matsushita Memorex Minolta Mitsubishi Motorola Multitech NAP 0000 0432 0526 0037 0038 0000 0008 0047 0000 0081 0038 0072 0068 0046 0000 0042 0041 0105 0067 0041 0008 0041 0037 0278 0072 0067 0041 0038 0046 0035 0037 0037 0000 0208 0072 0035 0240 0043 0061 0240 0240 0000 0278 0593 0035 0039 0081 0000 0149 0110 0240 0035 0081 0038 0037 0035 0162 0454 0035 0037 0048 0039 0047 0240 0000 0104 0046 0307 1037 1162 1262 0042 0105 0048 0067 0043 0061 0035 0048 0000 0072 0035 0037 0039 0042 0033 0034 0066 0105 14 Set Up Codes For VCRs Cont NEC 0104 0067 0041 0038 Sansui 0040 Nikko 0037 Sanyo Nikon 0034 0253 Scott Noblex 0240 Olympus 0035 Sears Optimus 0037 0048 0104 0162 0432 0454 0593 1048 1062 1162 1262 Semp Optonica 0062 Sharp Orion 0184 0002 0295 0479 Shintom Panasonic 0035 0162 0077 0225 Shogun 0454 1162 Signature Penney 0035 0037 0240 0042 Singer 0038 0040 0054 Sony Pentax 0042 0105 Philco 0035 0209 0479 Sunpak Philips 0035 0081 0062 0110 Sylvania Pilot 0037 Pioneer 0067 Symphonic Portland 0020 TMK Profitronic 0240 Tatung Proscan 0060 0202 Teac Protec 0072 Technics Pulsar 0039 Quarter 0046 Teknika Quartz 0046 Thomas Quasar 0035 0162 0077 0454 Toshiba 1162 RCA 0060 0035 0048 0240
13. Mathes Cybernex Daewoo Daytron Denon Dynatech Electrohome Electrophonic Emerex Emerson Fisher Fuji Funai GE 13 Enter the first VCR code listed for your brand in the Set Up Codes for VCRs below or Set Up Codes for TV VCR Combinations on the next page then press SELECT Aim the remote control at the VCR and press POWER or PLAY Your VCR should turn OFF or start to play Press the ESC key to return the display to VCR and the TIME If your VCR does not turn OFF or start to play enter the next code in the code list then press SELECT followed by POWER or PLAY again Once the correct code is entered press the ESC key to return the display to VCR and the TIME For a detailed explanation of what function each key will perform in the VCR mode please refer to 0048 0000 0278 0037 0000 0307 0041 0061 0106 0035 0240 0037 0240 0104 0184 0121 0209 0002 0295 0479 0072 0278 0037 0035 0020 0081 0278 0037 0278 0072 0037 0047 0240 0072 0271 0060 0035 0041 0162 0240 0045 0278 0020 0561 0020 0042 0000 0037 0037 0032 0037 0184 0000 0121 0043 0209 0002 0278 0036 0061 0068 0208 0212 0295 0479 0561 0047 0104 0054 0066 0035 0033 0000 0060 0035 0048 0240 0202 Garrard Go Video GoldStar Gradiente HI Q Harley Davidson Harman Kardon Harwood Headquarter Hitachi JVC Jensen KEC KLH Kenwood Kodak LX Lloyd s
14. POWER or PLAY again Once the correct code is entered press the ESC key to return the display to CD and the TIME YA a detailed explanation of what function each key will perform in the CD mode please refer to page 63 in the Key Index Set Up Codes for CD or MD Players ADC 0018 Magnavox 0157 0305 Adcom 0155 0234 Magnavox CD R 0626 Aiwa 0157 0012 0124 Marantz 0029 0157 0180 Akai 0156 Mcintosh 0287 Audio Alchemy 0194 Mission 0157 Audio Technica 0170 NEC 0043 0234 BSR 0194 0245 NSM 0157 Bang amp Olufsen 0212 Nakamichi 0147 Burmester 0420 Nikko 0164 0170 0174 California Onkyo 0101 0868 Audio Labs 0029 Optimus 000 0032 0179 0305 Carrera 0194 0037 0420 0145 0468 Carver 0157 0179 0437 0087 0175 0194 0196 Crown 0122 0280 0342 0426 0437 Curtis Mathes 0029 Panasonic 0029 0303 0367 0752 DAK 0245 Parasound 0420 0194 DBX 0254 Philips 0157 0287 0626 DKK 0000 Pioneer 0032 0305 0468 0244 Denon 0003 0873 Proscan 0053 Emerson 0305 0155 0164 0469 Proton 0157 Fisher 0179 0088 0174 0342 QED 0157 GE 0009 Quasar 0029 Garrard 0420 0393 0245 0280 RCA 0179 0305 0053 0009 0425 0155 0764 Genexxa 0032 0305 0164 Realistic 0179 0420 0155 0164 GoldStar 0417 0175 0180 Harman Kardon 0157 0173 0426 Rotel 0157 0420 Hitachi 0032 0155 SAE 0157 JVC 0072 0655 0658 STS 0018 Kenwood 0028 0037 0190 0826 Sansui 0157 0305 0202 0681 Sanyo 0179 0087 Kodak 0287 Scott 0305 0155
15. Press the key for the feature you want to move For the example above press VOL The display will change to TO Press the device key Device Key TV VCR CBL SAT etc where you would like to place the feature For the example above press VCR The display will show VCR 6 Now press the key that will control the feature you are moving For the example above press VOL The display will return to DEVICE and the TIME In the VCR mode your Home Producer will now operate volume up on your TV Now to com plete the example above repeat this sequence to move VOL and MUTE from the TV mode to the VCR mode 44 CLEAR ALL If you would like to reset the Home Producer of all advanced functions use the CLEAR ALL feature The CLEAR ALL feature will erase the following functions from the memory of the Home Producer Macro Sequences Timed Macro Sequences Volume Lock and Keymovers CLEAR ALL will not erase your set up codes To clear the memory using the CLEAR ALL feature Press and hold SETUP until the dis play screen changes from DEVICE and the TIME to TIMED SEQ N gt lt Press the MENU key twice the display will change to CONFIG URE Press SELECT the display will change to THEATR SEL 0 0 Press MENU one time the dis play will read CLEAR ALL Press SELECT the display will change to CLR ALL Press SELECT the display will change to CONFIRM Pre
16. VCR DVD CBL SAT TUNER AMP CD or AUX1 key to tell the remote control which component you would like to operate The HOME THEATER key is used to select the Home Theater mode of the Home Producer The ESC Escape key is used to exit the LCD Screen menu The LITE key is used to turn ON and OFF the Home Producer s backlit keypad and LCD screen Press the LITE key once to turn ON the backlight The Home Producer s backlight will stay on for 5 seconds after the last key press and re activates with the press of a key To de activate the backlight press the LITE key again The POWER key controls power ON and OFF The VOL Volume Up VOL Volume Down and MUTE keys control the volume the same as the Volume Up and Down and Mute keys on your original remote 6 00 000000 Function The CH Channel Up and Channel Down keys change channels the same as the Channel Up and Down keys on your original remote The MACRO and 2 keys memorize up to 15 keystrokes that can be accessed in sequence at the press of a single key These keys are not mode specific The SHIFT key accesses advanced features that are mapped under the following keys CENTER MENU SELECT MUTE PREV CH PIP REW PLAY FF STOP and PAUSE The 1L 6L keys are used for learning new features onto the Home Producer See pages 32 to 33 for further details NOTE For a detailed explanati
17. change to CONFIG URE Press SELECT the display will change to THEATR SEL MENU x2 Press MENU two more times the display will read VOL LOCK Press SELECT the display will change to LOCK 0 MENU Press MENU time to change the display to UNLOCK then press SELECT The display will return to DEVICE and the TIME MENU Now when you use the volume keys on your Home Producer each component will control its own volume as long as that component originally had volume control 43 KEYMOVER Keymover allows you to map features from one device mode to another For example if your VCR does not have volume control you can map the vol ume keys in the TV mode to the VCR mode This will allow you to control the volume of your TV while in the VCR mode To move key features from one mode to another 1 Press and hold SETUP until the dis play screen changes from DEVICE and the TIME to TIMED SEQ 2 x2 Press the MENU key twice the display will change to CONFIG URE Press SELECT the display will change to THEATR SEL 3 menu X4 Press MENU four times the dis play will read KEY MOVER Press SELECT the display will change to FROM 4 Device Key Press the device key e g TV VCR CBL SAT etc that contains the feature you want to move For the example above to move the TV s volume you would press TV The display will show TV 5
18. component on the same key will erase the code for the first component you set up For example if you set up a DVD Player on DVD and then set up a Turntable on DVD the Home Producer will only operate the Turntable For example to set up a Cassette Deck on the AUX1 key NOTE If the four digit code for your device begins with a 0 only the last three numbers of your code will be displayed 1 Turn on your Cassette Deck 2 Press and release the AUX1 key Press and hold SETUP until the display screen changes from TAPE and the TIME to TIME SEQ Press the MENU key one time The display screen will change to CODE SETUP Press SELECT The display will change to DEV SET UP on MENU Press SELECT and the display screen will change to TAPE 99 25 6 Press MENU to toggle between TAPE and DAT Once TAPE is on the display screen enter the first Cassette Deck code listed for your brand in the Set Up Codes for Cassette Decks on the next page then press SELECT Point the remote control at the Cassette Deck and press POWER Your Cassette Deck should turn OFF Then press the ESC key to return the display to TAPE and the TIME If your Cassette Deck does not turn OFF enter the next code in the code list then press SELECT followed by POWER again Once the correct code is entered press the ESC key to return the display to TAPE and the TIME MENU Re assigning Device Key
19. direct line of sight of the Command Center If you have a component that is not in the line of sight of the Command Center 1 Plug the 4 foot IR signal extension cord into the back of the Command Center A 2 the IR signal extension cord to the component that is not in the line of sight of the Command Center 3 Using the supplied double sided tape attach the IR signal extension cord so that the LED is over or next to the IR sensor of your home theater component LED 4 Test the Home Producer The Command Center will convert the RF signal from the Home Producer into an IR signal and trans mit that signal to your component through the IR signal extension cord NOTE If the IR signal extension cord does not control the com ponent that is not in the line of sight of the Command Center reposition the LED until the component is able to be controlled then re attach the LED 47 Here is a list of adjustments that can maximize the operation of your Command Center For optimal operation of the Home Producer s Command Center 1 Aim the Home Producer toward the room where the Command Center is located 2 Do not position the Command Center near metal such as heat ducts Metal can absorb RF signals 3 Make sure the batteries in the Home Producer are fully charged Weak batteries will affect the range of the Home Producer 4 Make sure that the range of the Home Producer is not being affected by other
20. display screen changes from TV and the TIME to TIMED SEQ Press the MENU key one time The display screen will change to CODE SETUP Press SELECT The display will change to DEV SET UP Press the MENU key another time The display screen will change to DEV SEARCH Press SELECT The display will change to TV and XXX NOTE XXX represents the last three digit code that was entered prior to starting the search 5 00 MENU Press POWER If your TV turns OFF press SELECT to lock in your code and return the display to TV and the TIME your TV does not turn OFF press MENU The next available code will appear on the display screen then press POWER again Continue to press POWER then MENU until your TV turns OFF Once your TV turns OFF press SELECT to lock in your code and return the display to TV and the TIME NOTE If you are searching for your VCR CD Player DVD Player or LD Player code use PLAY instead of POWER Once your component begins to play the tape or disc press SELECT to lock in the code 28 Finding Out Your Code After you have set up your components using the search you may need to find out which four digit code is operating your components For example to find out what four digit code is operating your TV Press and release the TV key lt Press and hold SETUP until the display screen changes from TV and the TIME to TIM
21. down on the black battery cover near the indentation where the black and silver sections meet and push slide the cover off see illustration Match the and marks on the batteries to the and marks in the battery case then insert the batteries Slide the battery cover back into place NOTE After inserting the batteries the LCD screen will enter a test mode which tests each segment of the LCD screen This process will last for 10 seconds or until any key is pressed which ever occurs first 4 USING YOUR HOME PRODUC ER Features and Functions The illustration below and the chart on the next two pages describe the features and the functions of the Home Producer s keypad The following keys will always have the same function regardless of which component you are controlling For an explanation of what each key does by component type please use the index at the rear of the manual pages 52 to 64 a a By g D 0 A B B VD lt ge 23 gt 09 0 0 Function The SETUP key is used to access the menu and program your Home Producer The TV VCR DVD CBL SAT TUNER AMP CD AUX1 keys are used to select the home enter tainment component you want to control If your component does respond when you press a key on the remote control press the TV
22. screen changes from DEVICE and the TIME to TIMED SEQ Press MENU twice until the display reads CONFIGURE then press SELECT The display will then read THEATR SEL Press MENU four times until the display reads KEY MACRO Press SELECT The display will read SEL MACKEY Press either the MACRO or MACRO2 key This will be the key that will play back the series of keystrokes assigned to that key The display will then read ENTER SEQ Begin entering the sequence of keystrokes up to 15 NOTE When setting up your sequence you will need to include any keystrokes that would normally be required during regular usage such as pressing ENTER after entering a channel number when changing channels lt 0 00 For example sequence TUNER POWER TV POWER TV SAT to change the input on the TV to VIDEO 1 SAT POWER When your macro sequence is con cluded press ESC to save When the sequence key is pressed the Tuner will power ON the TV will power ON and change its input to VIDEO 1 and then the Satellite will power ON Repeat these steps 1 to 3 to setup another sequence key MACRO or MACRO2 for your needs NOTE If you make a mistake during the setup of a macro sequence press ESC to return to the main display screen and begin the setup of your sequence again 39 HOW TO USE THE SHIFT KEY The Home Producer has additional features that can be accessed by using the SHIFT key
23. the days of the week until a desired day is displayed Press SELECT The display will change to ENTER SEQ MENU 36 NOTE When setting up your sequence you will need to include any keystrokes that would normally be required during regular usage such as pressing ENTER after entering a channel number when changing channels For example enter a sequence that will start your VCR recording your DSS channel as follows POWER SAT 2 7 5 VCR POWER VCR RECORD This sequence will turn on the DSS change the channel to 275 and turn on the VCR and start it recording Once a sequence has been set up press the ESC key to return to the DEVICE and the TIME display screen Below the TIME a CLOCK symbol will appear to show that there is a timed sequence in the memory NOTE If at any time during the set up of your timed sequence a mistake is made press the ESC key to return to the main display DEVICE and the TIME Then delete the sequence that was incorrect and restart your timed sequence After you have set up a timed sequence you may want to set up a second sequence that turns every thing off after your initial sequence For the example above after recording the program from your DSS you can set up a second sequence to power OFF your DSS and VCR Just repeat steps 1 through 5 to set up a sequence to power OFF your components 37 To Delete a Timed Sequence 1 Press an
24. 0164 Krell 0157 Sears 0305 Kyocera 0018 Sharp 0037 0180 0861 LXI 0305 Sherwood 0180 0196 0426 Linn 0157 Shure 0043 Luxman 0093 Sony 0000 0185 0490 0604 MCS 0029 0043 0605 MTC 0420 Soundesign 0145 0425 21 Set Up Codes for CD or MD Players cont Sylvania Tascam Teac Technics Vector Research 0157 Victor 0072 0420 Wards 0157 0053 0420 0393 0174 0180 Yamaha 0036 0170 0187 0029 0207 0303 Yorx 0461 0194 0417 To Set Up Your Tuner Receiver NOTE If the four digit code for your device begins with a 0 only the last three numbers of your code will be displayed 1 2 oa MENU 00 Turn your Tuner Receiver Press and release the TUNER key Press and hold SETUP until the display screen changes from TUNER and the TIME to TIMED SEQ Press the MENU key one time The display screen will change to CODE SETUP Press SELECT The display will change to DEV SET UP Press SELECT and the display screen will change to TUNER Enter the first Tuner code listed for your brand in the Set Up Codes for Tuner Receivers the next page then press SELECT Aim the remote control at the Tuner Receiver and press POWER Your Tuner Receiver should turn OFF Press the ESC key to return the display to TUNER and the TIME If your Tuner Receiver does not turn OFF enter the next code in the code list then press SELECT followed by POWER Once the corre
25. 0240 Mitsubishi 0048 TV 0093 Orion 0002 0294 0479 on page 10 0035 TV 0051 0162 TV 0250 0035 TV 0051 0240 0162 TV 0250 0035 TV 0051 0162 TV 0250 0035 TV 0051 0060 TV 0047 0048 TV 0093 0000 0479 0240 0000 0037 0032 TV 0000 0000 0000 NOTE If a separate TV code is listed for your brand use it to set up your television by following the instructions 15 To Set Up Your Cable Box NOTE If the four digit code for your device begins with a 0 only the last three numbers of your code will be displayed 1 Turn on your Cable Box Press and release the CBL SAT key Press and hold SETUP until the display screen changes from CABLE and the TIME to TIMED SEQ Press the MENU key one time The display screen will change to CODE SETUP Press SELECT The display will change to DEV SET UP Press SELECT and the display screen will change to CABLE Enter the first Cable Box code listed for your brand in the Set Up Codes for Cable Boxes on page 16 the press SELECT Point the remote control at the Cable Box and press POWER Your Cable Box should turn OFF If your Cable Box turns OFF press the ESC key to return the display to CABLE and the TIME If your Cable Box does not turn OFF enter the next code in the code list then press SELECT fol lowed by POWER again Once the correct code is entered press the ESC key to return t
26. 6 Candle 0030 0056 0046 0186 Luxman 0056 1 Turn on your TV Capehart 0052 0185 Carnivale 0030 MGA 0150 0030 0178 0019 arver MTC 0019 A 2 Press and release the TV key aN Cineral 0451 0092 Magnavox 0054 0030 0179 0020 Citizen 0060 0030 0056 0039 0024 0096 0186 0187 3 Press and hold SETUP until the 0046 0092 0186 0280 0386 0171 display screen changes from Clairtone 0185 Majestic 0016 Concerto 0056 Marantz 0054 0030 TV and the TIME to TIMED SEQ Contec 0180 0157 0185 Matsushita 0051 0250 Craig 0180 Megatron 0178 0145 0003 4 Press the MENU key one time Crosley 0054 Memorex 0154 0250 0150 0060 Crown 0180 0039 0178 0056 0016 E The display screen will change to Curtis Mathes 0047 0054 0154 Midland 0047 0017 0051 0039 CODE SETUP Press SELECT 0051 0451 0093 0060 0032 0135 0030 0145 0056 0016 inutz 0021 The display will change to 0039 0166 0466 1147 Mitsubishi 0093 0150 0178 0019 DEV SET UP 1347 Motorola 0093 0055 Daewoo 0451 0019 0039 0092 Multitech 0180 0217 0623 0624 NAD 0156 0178 0166 5 Press SELECT and the display Daytron 0019 0039 NEC 0030 0019 0056 0497 screen will change to TV Denon 0145 NTC 0092 Dumont 0017 0019 Nikko 0047 0017 0154 0156 Dwin 0720 0774 0030 0178 0092 1347 6 Enter the first TV code listed for your Dynatech 0217 ooie 0000 0185 nwa brand in the Set Up
27. 655 66 Copyright 1999 by Universal Electronics Inc No part of this publication may be reproduced trans mitted transcribed stored in any retrieval system or translated to any language in any form or by any means electronic mechanical magnetic optical manual or otherwise without the prior written per mission of Universal Electronics Inc One For All and Home Producer are trademarks Universal Electronics Inc One For All is designed for compatibility in North America excluding Mexico URC 9800 REV Home Producer M9800 8 99
28. 7 0525 Paragon 0000 Zentek 0400 AlphaStar 0772 Janeil 0152 Astro Industries 0095 Jerrold 0627 0361 BSR 0095 Legend 0269 Capetronic 0095 Macom 0018 Channel Master 0018 0212 Magnavox 0724 0722 H Chaparral 0053 0209 0216 Memorex 0724 0269 To Set Up Your DSS or Satellite Receiver DX Antene 004i NOTE If the four digit code for your device begins with 0 only 0018 0064 0149 0245 f will be displayed 0722 ne last MEE NUMOS OFVOUF COAG ale Dish Network 0775 0148 0159 0269 President 0074 1 Turn on your DSS or Satellite 0280 Expressvu 0775 Proscan 0566 Receiver General RCA 0566 0143 0392 0855 Instrument 0627 0361 0869 Radio Shack 0566 0869 HTS 0775 Realistic 0052 Press and release the CBL SAT key TERT 815 STs 0041 0210 Homecable 0238 Sony 0639 i Hughes Star Choice 0869 Press and hold SETUP until the Network Sys 0749 Star Trak 0180 display screen changes from Hytek 0095 Toshiba 0790 0082 CABLE and the TIME to TIMED SEQ Q 0210 Uniden 0724 0722 0052 0074 1Q Prism 0210 0076 0238 0370 JVC 0775 Zenith 0064 0245 0856 18 To Set Up Your DVD or LD Player NOTE If the four digit code for your device begins with a 0 only the last three numbers of your code will be displayed 1 lt 5 Turn on your DVD or LD Player and insert a disc Press and release the DVD key Press and hold SETUP until the display screen chang
29. Codes for LD Players Aiwa 0203 Panasonic 0204 Carver 0064 0194 0323 Philips 0064 0194 Denon 0059 0172 Pioneer 0059 0023 Disco Vision 0023 Quasar 0204 Funai 0203 Realistic 0203 Harman Kardon 0194 Samsung 0323 Hitachi 0023 Sega 0023 Magnavox 0194 0217 Sony 0193 0201 Marantz 0064 0194 Technics 0204 Mitsubishi 0059 Theta Digital 0194 NAD 0059 Yamaha 0217 To Set Up Your CD or MD Player NOTE If the four digit code for your device begins with a 0 only the last three numbers of your code will be displayed 1 Turn on your CD or MD Player insert a disc Press and release the CD key Press and hold SETUP until the display screen changes from CD and the TIME to TIMED SEQ os MENU 990 Press the MENU key one time The display screen will change to CODE SETUP Press SELECT The display will change to DEV SET UP Press SELECT and the display screen will change to CD Enter the first CD code listed for your brand in the Set Up Codes for CD or MD Players on the next page then press SELECT 20 To Set Up Your CD or MD Player cont 7 Aim the remote control at the CD or MD player and press POWER or or PLAY Your player should turn OFF or start to play your disc Press the ESC key to return the display to CD and the TIME If your player does not turn OFF or start to play your disc enter the next code in the code list then press SELECT followed by
30. Codes for TVs Electrohome 0381 Optimus 0154 0250 0166 on pages 10 12 then press SELECT Emerson 0154 0236 0463 0180 Optonica 0093 0165 0282 0178 0019 0179 Orion 0236 0463 0179 0039 0038 0177 0185 Panasonic 0047 0054 0154 0156 7 Aim the remote control the TV 0280 0623 0624 0051 0250 0093 0165 press POWER Your TV should turn Envision 0030 0150 0060 0053 0178 Fisher 0154 0159 0145 0055 0001 1347 OFF Press ESC to return the display Fujitsu 0179 Penney 0047 0156 0051 0060 to TV and the TIME If your TV does Funai 0180 0179 0171 0030 0178 0021 0019 Futuretech 0180 0018 0056 0039 0003 not turn OFF enter the next code in GE 0047 0051 0451 0093 0027 0032 0135 1347 the code list then press SELECT fol 0282 0178 0021 0055 Philco 0054 0463 0030 0145 0027 0135 1147 1347 0019 0020 0024 0096 lowed by POWER again Once the Gibralter 0017 0030 0019 0186 0187 correct code is entered press ESC to Go Video 0060 Philips 0054 0017 0000 0021 return the display to TV and TIME GoldStar 0030 0178 0019 0056 0019 0018 0039 0020 0039 0001 0032 0024 0027 0052 0171 Gradiente 0053 0056 Pilot 0030 0019 0039 For a detailed explanation of what function each key Grunpy pais Pioneer 0038 0166 will perform in the TV mode please refer to page 52 Hallmark 0178 Portland 0019 0039 0092 in the Key Index Harley Davidson 0179 Prism 0051 Harman Kardo
31. ED SEQ Press the MENU key one time The display screen will change to CODE SETUP Press SELECT The display will change to DEV SET UP A OB gt x lt N Press MENU twice The display will change to DEV NUMBER Press SELECT The display will then change to TV and your code Write down the code in the below boxes and press ESC to return the display to TV and the TIME TV code VCR Code Cable Code Satellite Code Tuner Code Amplifier Code CD Player Code DVD LD Player Code 29 SETTING UP THE HOME THEATER KEY The HOME THEATER mode key brings all of the most commonly used home theater functions into one mode of the Home Producer When setting up this key you will choose which components will control your volume channel changing playback Picture in Picture and menu functions Press and release the HOME 1 Sy THEATER mode key Press and hold SETUP until the display screen changes from THEATER and the TIME to TIMED SEQ 3 x2 Press the MENU key twice the display will change to CONFIGURE Press SELECT the display will change to THEATR SEL press SELECT The display will change 2 AUDIO 4 Press SELECT This will change the display to AMP or if you have redefined the AMP key the display would read TV2 DVD2 SAT2 and so on At this screen you will
32. ENU NENU 55 The MOVE PIP key moves the Picture in Picture window around your TV screen The MENU key operates the same as the MENU or OSD On Screen Display key on your original re mote Use the MENU Up MENU Down Left and Right gt to navigate through your menus If your original remote con trol had a Select Enter key for use in your menu use SELECT or ENTER The PROG key SHIFT MENU operates your secondary menus Use the MENU Up MENU Down Left and Right to navigate through your menus If your original remote control had a Select Enter key for use in your menu use SELECT or ENTER The SELECT key is used to make selections in the LCD Screen menu It is also used to make selections in your on screen VCR menus The CLEAR key SHIFT SELECT is used to exit or cancel selections in your on screen VCR menus The MENU Up MENU Down Left and Right are used to navigate through your on screen menus MENU and MENU are also used to navigate through the LCD Screen menu The CENTER and REAR SHIFT CENTER keys function the same as the ADD and DELETE keys on your original VCR remote control 56 Cable Functions 0 9 The Digit keys 0 9 control direct channel access the same as the Digit keys on your original remote NOTE If your original remote control required you to use an Enter key to change channels use the ENTER key on the Ho
33. Home Entertainment Components NOTE If the four digit code for your device begins with a 0 only the last three numbers of your code will be displayed 1 Turn on all of the components that you will be setting up Press and release the TV key Press and hold SETUP until the display screen changes from TV and the TIME to TIMED SEQ Press the MENU key one time The display screen will change to CODE SETUP Press SELECT The display will change to DEV SET UP Press SELECT The display will change to TV Enter the first TV code listed for your brand in the Set Up Codes for TVs on pages 10 12 then press SELECT Point the remote control at the TV and press POWER Your Television should turn OFF If your TV does not turn OFF enter the next code in the code list then press SELECT followed by POWER again Once your TV turns OFF press VCR You will now enter your VCR code a Enter the first VCR code listed for your brand in the Set Up Codes for VCRs on pages 13 14 then press SELECT Point the remote control at the VCR and press POWER Your VCR should turn OFF If your VCR does not turn OFF enter the next code in the code list then press SELECT followed by POWER again Once your VCR turns OFF press CBL SAT You will now enter your Cable Box code CBL SAT 9 Continue to enter your codes as illustrated in Steps 5 and 6 until the Home Producer is operating all of your home
34. ONG Macro sequence being entered exceeds 15 keystrokes LIST END You have reached the end of all valid codes using the Step N Set sequence INVALID Displayed when trying to specify a key that is not valid for the sequence being entered For example when selecting a Device Key e g TV for a Macro sequence NOT FOUND Displayed when you enter in a code that is not valid for the device being programmed ERROR Displayed when an error has occurred in the learning sequence Consumer Help Line 1 330 593 3325 World Wide Web http www hudsonag com E mail help Help hudsonag com 52 TV Functions 0 9 The Digit keys 0 9 control direct channel access the same as the Digit keys on your original remote NOTE If your original remote control required you to use an Enter key to change channels use the ENTER key on the Home Producer after entering your channel number The ENTER key operates the same as the Enter key on your original TV remote control The TV SAT key operates the same as the TV VIDEO or INPUT key on your original TV remote control The PREV CH Previous Channel key operates the same as the LAST CHANNEL or RECALL key on your original TV remote control 0 The DISPLAY key SHIFT PREV CH operates the display on your TV The PIP key accesses your TV s Picture in Picture feature The FREEZE key SHIFT PIP freezes your Picture In Picture window
35. OWER key to assign the macro to POWER Enter the macro sequence that will power your home theater for example TUNER POWER TV POWER VCR POWER until you have added all of your home theater components When your macro sequence is con cluded press ESC to save The dis play will then return to the THE ATER and the TIME screen To activate the Home Theater Power macro the LCD screen must read THEATER and you must press POWER NOTE The MACRO MACRO2 keys cannot be used in your Home Theater Power key macro 32 LEARNING FUNCTIONS ONTO THE 1L THROUGH 6L KEYS The 1L 2L 3L 4L 5L and 6L keys can be used to customize those functions that are unique to your home entertainment needs For example the Home Producer does not offer Tracking Up or Down for a VCR However with the learning feature you can add these as well as many other functions to the Home Producer NOTE Please have your original remote controls handy before performing learning 1 Device Key Press and release the Device key e g VCR where you want Home Producer to learn new feature s Press and hold SETUP until the display screen changes from the device you selected e g VCR and the TIME to TIMED SEQ 0 x2 Press MENU twice the display will change to CONFIGURE Press SELECT the display will change to THEATR SEL Press MENU twice the display will 2 change to IR LEARNER
36. ave a sleep timer the Home Producer will access its own built in timer To activate it press SLEEP i e SHIFT MUTE The display will change to SLEEP 15 To add time to the sleep timer press MENU Each press of MENU will add 15 minutes to the sleep timer up to a total of 60 minutes Once the desired time is displayed on the LCD screen press SELECT The display screen will change to SLEEP and the TIME Sleep Lock If you would like Home Producer to use its built in sleep timer on all of your components you can lock the SLEEP mode as follows Press and hold SETUP until the dis play screen changes from DEVICE and the TIME to TIMED SEQ Press the MENU key twice the display will change to CONFIG URE Press SELECT the display will change to THEATR SEL Press MENU thrice the display x3 will read SLEEP LOCK Press SELECT the display will change to DISABLE Press MENU once to change the display to ENABLE then press SELECT The display will return to DEVICE and the TIME Now whenever you press SLEEP i e SHIFT MUTE Home Producer will use its own built in sleep timer NOTE When using the built in sleep timer pressing POWER will cancel the sleep function 41 VOLUME LOCK With the Home Producer you can choose which home entertainment component controls your vol ume When you originally set up the Home Producer each indivi
37. ch key will perform in the Amplifier mode please refer to page 61 in the Key Index Set Up Codes for Amplifiers Aiwa 0406 Optimus 0395 Bose 0674 Panasonic 0308 Carver 0269 Parasound 0246 Curtis Mathes 0300 Philips 0269 0892 Denon 0160 Pioneer 0013 0300 GE 0078 Realistic 0395 Harman Kardon 0892 Sansui 0321 JVC 0331 Shure 0264 Kenwood 0356 Sony 0220 0689 Linn 0269 Soundesign 0078 0211 Luxman 0165 Technics 0308 0521 Magnavox 0269 Victor 0331 Marantz 0269 0321 0892 Wards 0013 0078 0211 NEC 0264 Yamaha 0354 0133 0143 0504 Nakamichi 0321 24 STING UP ADDITIONAL HOME ENTERTAINMENT COMPONENTS Besides the device keys that are already labeled TV VCR CBL etc the Home Producer can also operate the following components Cassette Decks Home Automation Digital Audio Tape Turntables Video Accessories and Miscellaneous Audio Components e g Graphic Equalizers and Digital Music Service Boxes The Set Up codes for these devices can be accessed under the following device keys Cassette Decks Home Automation Digital Audio Tape Turntables Use the CD Key Video Accessories Use the CBL SAT Key Note Web TV found under Video Accessories Miscellaneous Audio Use the AMP Key Use the AUX1 Key Use the CD Key Use the AUX1 Key NOTE Each device key e g TV VCR CBL SAT etc can only operate one component at a time If you have already set up a component on a key then assigning a second
38. ct code is entered press the ESC key to return the display to TUNER and the TIME For a detailed explanation of what function each key will perform in the Tuner mode please refer to page 60 in the Key Index 22 Set Up Codes For Tuner Receivers ADC 0531 Optimus Adcom 0616 Aiwa 0158 0189 0121 0405 Akai 0076 0224 Bang amp Olufsen 0898 Capetronic 0531 0195 Panasonic Carver 0189 0008 0042 0360 Penney Casio 0195 Philips Clarinette 0195 Pioneer Curtis Mathes 0039 0080 Denon 0004 0273 0771 Emerson 0424 Fisher 0042 0219 0360 0801 Proscan Garrard 0463 0424 Quasar Harman Kardon 0110 0189 0891 RCA Inkel 0062 JBL 0110 Realistic JVC 0074 Sansui Kenwood 0027 0186 0042 0077 Sanyo 0313 0314 Scott Koss 0424 Sharp LXI 0181 Sherwood Linn 0189 Siemens Lloyd s 0195 Sony MCS 0039 0346 Magnavox 0531 0189 0195 0128 Soundesign 0391 Teac Marantz 0039 0189 0128 Technics Modulaire 0195 Victor NAD 0320 Wards NEC 0235 Nakamichi 0097 0347 Yamaha Onkyo 0135 0100 0380 Yorx Zenith 0531 0670 0186 0042 0177 0181 0219 0738 0801 1023 0042 0080 0181 0186 0531 0670 0738 0801 0039 0309 0518 0195 0189 0391 0531 0014 0150 0630 0080 1023 0014 0080 0150 0531 0630 1023 0054 0039 0531 0054 0346 0360 0530 0195 0163 0181 0189 0193 0346 0219 0801 0163 0322 0186 0491 0062 0502 0424 0158 0168 0474 0158 0474 0670 0463
39. d hold SETUP until the display screen changes from DEVICE and the TIME to TIMED SEQ Press SELECT The display will change to ADD MACRO Press MENU one time The dis play will change to DEL MACRO Press SELECT 090 MENU The display will then change to DEL the DAY or D for Daily or W for WEEKLY and the TIME of the Sequence If this is the timed se quence you would like to delete press SELECT The display will change to DELETED then return to DEVICE and the TIME 99 NOTE If you have than one timed sequence saved the memory of the Home Producer use the MENU key to scroll through your saved timed sequences until you see the sequence you would like to delete Once the sequence is displayed on the screen press SELECT The display will change to DELETED then return to the next available sequence to be deleted If there are no other sequences to be deleted then the display will return to DEVICE and the TIME 38 REPEATING A SERIES OF KEY PRESSES USING THE MACRO AND 2 KEYS The Home Producer has two Macro keys MACRO and MACRO2 that will play back a series of key strokes at any time with the press of one key Each sequence can have up to a maximum of 15 key strokes These keys are not mode specific and can be accessed in any mode For example to set up a sequence that will turn on devices and turn them to the proper inputs 1 Press and hold SETUP until the dis play
40. dual component operates its own volume provided the component has volume control You can change this setting so that one component controls the volume whether Home Producer is in the TV VCR or CBL SAT mode For example to set up the Home Producer to always control the volume through your Amplifier in the TV VCR or CBL SAT mode Press and hold SETUP until the dis play screen changes from DEVICE and the TIME to TIMED SEQ gt lt Press the MENU key twice the display will change to CONFIG URE Press SELECT the display will change to THEATR SEL gt lt Press MENU two more times the display will read VOL LOCK Press SELECT the display will change to UNLOCK A popopo Press MENU one time to change the display to LOCK then press SELECT Now press the key for the component that will control your vol ume For example to control the vol ume through your amplifier press AMP Press SELECT The display will return to DEVICE and the TIME 2 Now when you use the volume keys your Home Producer the volume will be controlled by the specified component To return volume control to a component 1 Press and hold SETUP until the dis play screen changes from DEVICE and the TIME to TIMED SEQ continued on next page 42 To return volume control to a component cont 2 x2 Press the MENU key twice the display will
41. ducer after entering your channel number The ENTER key operates the same as the Enter key on your original remote control The DVD key operates the same as the DVD LD key on your original LD or DVD Player remote control The DISPLAY key SHIFT PREV CH operates the display on your LD or DVD Player The MENU key operates the same as the Menu or Program key on your original remote The SELECT key operates the same as the CHAPTER button on your original DVD or LD Player remote control The MENU key operates the same as the MENU or OSD On Screen Display key on your original re mote Use the MENU Up MENU Down Left and Right gt to navigate through the LCD screen menu 59 The CLEAR key SHIFT SELECT is used to exit or cancel selections in your Programming Menu The CENTER and REAR SHIFT CENTER keys function the same as DISC A and DISC B keys on your original remote control The SUR Surround key functions the same as the DISC key on your original remote control DSS amp Satellite Functions 0 9 The Digit keys 0 9 control direct channel access the same as the Digit keys on your original remote NOTE If your original remote control required you to use an Enter key to change channels use the ENTER key on the Home Producer after entering your channel number The ENTER key operates the same as the Enter key on your original Satellite remote c
42. e Techwood Teknika Telefunken Toshiba Tosonic Totevision Trical Universal Vector Research Victor Vidikron Vidtech Viking Wards White Westinghouse Yamaha Zenith Zonda 0171 0178 0056 0177 0093 0055 0003 0047 0017 0051 0250 1347 0179 0051 0056 0003 0054 0180 0150 0060 0019 0179 0056 0016 0039 0092 0186 0056 0154 0156 0060 0185 0039 0157 0021 0027 0030 0053 0054 0178 0019 0046 0054 0156 0165 0030 0178 0021 0019 0179 0056 0016 0020 0027 0080 0096 0111 0135 0187 0623 0624 0030 0019 0017 0016 0092 0146 0003 To Set Up Your VCR or TV VCR Combinations NOTE If the four digit code for your device begins with a 0 only the last three numbers of your code will be displayed 1 2 VCR MENU Turn on your VCR and insert a tape Press and release the VCR key Press and hold SETUP until the display screen changes from VCR and the TIME to TIMED SEQ Press the MENU key one time The display screen will change to CODE SETUP Press SELECT The display will change to DEV SET UP Press SELECT and the display screen will change to VCR 5 54 in the Key Index Set Up Codes For VCRs Admiral Adventura Aiko Aiwa Akai American High Asha Audiovox Beaumark Bell amp Howell Broksonic CCE Calix Canon Capehart Carver Cineral Citizen Colt Craig Curtis
43. eleting Functions From The L 34 SETTING UP TIMED SEQUENCES To Delete a Timed Sequence REPEATING A SERIES OF KEY PRESSES USING THE MACRO AND MAGRO2 KEYS 38 HOW TO USE THE SHIFT KEY 39 HOW TOUSE THE SLEEP KEY 40 LOCK E 40 41 43 CLEAR ALL SETTING UP AND USING THE IR RF COMMAND CENTER ii COMPLIANCE WITH THE FCC RULES AND SPECIFICATIONS 48 49 ERROR MESSAGES 51 KEY INDEX 52 VCR FUNCTIONS 54 Gable 56 DVD LD Cassette Functions 58 DSS amp Satellite Functions 59 Receiver Tuner Functions 60 Amplifier 61 CD Functions 63 Home Automation Functions WARRANTY icciccccsiscscsseceissneassssnccsicaneueacacgueansduracesessascnecearssieesscaacsisinsesneadl 65 3 INSTALLING THE BATIERIES Your Home Producer requires four 4 new AAA alkaline batteries To install the batteries On the back of the Home Producer press
44. emote control The CLEAR key SHIFT SE LECT is used to exit or cancel selections in your on screen menus The transport keys i e PLAY REW FF STOP PAU REC access the features of your CD Player MENU MENU 61 The MENU Up and MENU Down keys access REAR LEVEL and REAR LEVEL respectively MENU Left and MENU Right access BALANCE LEFT and BALANCE RIGHT NOTE The SHIFT key accesses advanced features that are mapped under the MENU keys SHIFT MENU CENTER LEVEL SHIFT MENU CENTER LEVEL SHIFT MENU DELAY and SHIFT MENU amp DELAY The SLEEP key SHIFT MUTE accesses the sleep timer on your Receiver Even if your Receiver does not have a sleep timer the Home Producer can access its own built in sleep timer The SUR Surround key functions the same as the Surround Mode key on your original remote control The CENTER and REAR SHIFT CENTER keys function the same as the Center Mode and Rear Mode keys on your original Receiver remote control Amplifier Functions 0 9 The Digit keys 0 9 access the different inputs of your Amplifier The TV SAT key operates the same as the INPUT key on your original Amplifier remote control The DISPLAY key SHIFT PREV CH operates the display on your Amplifier The SELECT key operates the TAPE MON function on your origi nal Amplifier re
45. entertainment components Once you have fin ished setting up your components press ESC to return to the DEVICE and TIME display If you would like to set up each of your components individually or if you purchase a component after you have set up the A V Home Producer go to the SETTING UP INDIVIDUAL HOME ENTERTAINMENT COMPONENTS section on pages 10 to 23 in this manual Set Up Codes for 5 Page 10 Set Up Codes for Page 13 Set Up Codes for TV VCR Combinations Page 14 Set Up Codes for Cable Page 16 Set Up Codes for DSS and Satellite Page 17 Set Up Codes for DVD or LD Players Page 19 Set Up Codes for CD or MD Players Page 20 Set Up Codes for Page 22 Set Up Codes for Page 23 11 SEMING UP INDIVIDUAL HOME Set Up Codes for TVs cont ENTERTAINMENT COMPONENTS Bell amp Howell 0154 0016 Kaypani 0052 Beuamark 0017 0030 0179 Kenwood 0030 0019 Bradford 0180 Kloss 0024 0046 To Set Up Your Television Brockwood 0019 LG 0056 Broksonic 0236 0463 0003 LXI 0047 0054 0017 0154 NOTE If the four digit code for your device begins with a 0 only CCE 0217 0156 0178 1347 the last three numbers of your code will be displayed CXC 0180 Logik 001
46. es from DVD and the TIME to TIMED SEQ Press the MENU key one time The display screen will change to CODE SETUP Press SELECT The display will change to DEV SET UP Press SELECT and the display screen will change to DVD NOTE If you are setting up a LD Player press either MENU or The display will change to LDP 6 YA Enter the first DVD or LD code listed for your brand in the Set Up Codes for DVD Players or Set Up Codes for LD Players on the next page then press SELECT Aim the remote con trol at the DVD or LD player and press POWER or PLAY Your player should turn OFF or start to play your disc Press the ESC key to return the display to DVD and the TIME If your player does not turn OFF or start to play your disc enter the next code in the code list then press SELECT followed by POWER or PLAY again Once the correct code is entered press the ESC key to return the dis play to DVD and the TIME For a detailed explanation of what function each key will perform in the DVD mode please refer to page 58 in the Key Index 19 Set Up Codes for DVD Players Harman Kardon 0582 Pioneer 0525 0571 JVC 0558 Proscan 0522 Kenwood 0534 RCA 0522 Magnavox 0503 Samsung 0573 Magnavox CD R 0626 Sony 0533 Mitsubishi 0521 Technics 0490 Onkyo 503 Theta Digital 0571 Optimus 0525 Toshiba 0503 Panasonic 0490 Yamaha 0490 0545 Philips 0503 0539 Zenith 0503 0591 Set Up
47. he display to CABLE and the TIME NOTE If your original Scientific Atlanta remote control does not have an key press CH or one of the digit keys on the Home Producer to turn your Cable Box on For a detailed explanation of what function each key will perform in the Cable mode please refer to page 56 in the Key Index 16 17 4 Press the MENU key The displa Set Up Codes For Cable Boxes screen will change to CODE ABC 0003 0008 0014 0017 Philips 0153 0025 0027 0031 SETU Press SELECT The 0007 0011 0001 0013 Pioneer 0144 0023 0533 Allegro 0153 0315 Popular display will change to DEV SET UP Antronix 0022 0207 Mechanics 0400 Archer 0153 0022 0207 0797 Proscan 0021 i Belcor 0056 Pulsar 0000 5 Press SELECT and the display Bell amp Howell 0014 Quasar 0000 screen will change to CABLE Cable Star 0056 RCA 0021 Cabletenna 0022 Radio Shack 0015 0315 0797 0883 Cableview 0022 Realistic 0207 6 Press the MENU key The display Century 0153 Recoton 0400 i Citizen 0153 0315 Regal 0020 0259 MENU screen will change to SAT Colour Voice 0025 0031 Regency 0002 coment T0010 Rembrandt 0011 7 Enter the first Satellite code listed Contec 0019 Runco 0000 Digi 0637 SL Marx 0040 for your brand in the Set Up Codes Eastern 0002 Samsung 0144 0040 for Satellites on page 17 then Emerson 0797 Scientific Everquest 0015 0040 Atlan
48. me Producer after entering your channel number The ENTER key operates the same as the Enter key on your original Cable Box remote control The TV SAT key operates the same as the A B key on your original Cable Box remote control The PREV CH Previous Channel key operates the same as the LAST CHANNEL or RECALL key on your original Cable Box remote control The DISPLAY key SHIFT PREV CH operates the display on your Cable Box PIP key accesses your Picture in Picture features The FREEZE key SHIFT PIP freezes the Picture In Picture window The SWAP key swaps the Picture in Picture window and the main picture 0 The MOVE PIP key moves the Picture in Picture window around your TV screen The MENU key operates the same as the MENU or OSD On Screen Display key on your original re gt mote Use the MENU Up MENU Down lt Left and Right gt to navigate through your menus If your original remote control had a Select Enter key for use in your menu use SELECT or ENTER MENU MENU MENU 57 The PROG key SHIFT MENU operates your secondary menus Use the MENU Up MENU Down Left and Right to navigate through your menus If your original remote control had a Select Enter key for use in your menu use SELECT or ENTER The SELECT key is used to make selections in the LCD Screen menu I
49. mote control continued on next page 62 KEY INDEX cont Amplifier Functions cont The MENU Up and MENU Down keys access REAR LEVEL gt REAR LEVEL respectively MENU Left and MENU Right access BALANCE LEFT and BALANCE RIGHT NOTE The SHIFT key accesses advanced features that are mapped under the MENU keys SHIFT MENU CENTER LEVEL SHIFT MENU CENTER LEVEL SHIFT MENU DELAY and SHIFT MENU amp DELAY MENU The SLEEP key SHIFT MUTE accesses the sleep timer on your Amplifier Even if your Amplifier does not have a sleep timer the Home Producer can access its own built in sleep timer The SUR Surround key functions the same as the Surround Mode key on your original remote control The CENTER and REAR SHIFT CENTER keys function the same as the Center Mode and Rear Mode keys on your original Amplifier remote control 63 CD Functions The transport keys i e PLAY REW FF STOP PAU and REC access the features of your CD Player NOTE The SHIFT key accesses advanced features that are mapped under the VCR keys e g SHIFT STOP EJECT 0 9 The Digit keys 0 9 control direct track access the same as the digit keys on your original remote control The ENTER key operates the same as the Enter key on your original CD Player remote The TV SAT key operates the same as the A B key on
50. n 0054 0047 0030 1347 Harvard 0180 Proton 0178 0003 0052 0466 Set Up Codes for TVs Hitachi 0145 0056 0032 0038 Pulsar 0017 0019 A Mark 0003 Ambassador 0177 0151 Quasar 0051 0250 0165 0055 AOC 0030 0019 0003 0052 Ampro 0751 Infinity 0054 RCA 0047 0051 0093 0019 0185 Anam 0180 Inteq 0017 0018 0038 0090 0135 Abex 0032 Anam National 0055 JBL 0054 1047 1147 1247 1347 Admiral 0093 Archer 0003 JCB 0000 Radio Shack 0047 0154 0165 0180 Adventura 0046 Audiovox 0451 0180 0003 0092 JVC 0053 0030 0178 0019 0056 Aiko 0092 0623 Janeil 0046 0039 0032 Akai 0030 Aumark 0060 KEC 0180 Realistic 0154 0165 0180 0030 Alaron 0179 Baysonic 0180 KTV 0180 0030 0039 0185 0178 0019 0056 0039 Allegro 0720 0774 Belcor 0019 0217 0280 0032 12 Set Up Codes for TVs cont Rhapsody Runco 555 Sampo Samsung Sam sux Sansei Sansui Sanyo Scimitsu Scotch Scott Sears Semivox Semp Sharp Shogun Signature Simpson Sony Soundesign Spectricon Squareview Starlite Supre Macy Supreme Sylvania 0185 0017 0030 0497 0603 0180 0019 0030 0039 0032 0052 0060 0030 0178 0019 0056 0039 0032 0039 0451 0463 0154 0146 0159 0019 0178 0236 0180 0178 0019 0179 0047 0054 0154 0156 0178 0179 0056 0146 0159 0171 0180 0156 0093 0165 0039 0157 0054 0030 0020 0024 0096 0186 0187 0381 Symphonic TMK Tandy Tatung Technics Technol Ac
51. nels If your original remote control required an ENTER keystroke when changing channels press the ENTER key on the Home Producer after you enter the channel number The red light blinks when you press a key but you receive no response from your home entertain ment component Make sure you are aiming your Home Producer at your home entertainment compo nent and that you are within 15 feet before using your remote control Your audio compo nents turn on and off and control volume but do not change preset channels Some audio components may need both a Tuner Receiver code and an Audio Amplifier code to control all of the fea tures of your audio component Your DSS satellite receiver does not respond to the codes listed in the manual The codes listed in this man ual are set up to operate your DSS receiver on the 1st or 2nd addresses only Make sure the DSS Receiver can be operated with an infrared remote control and is not set up to only receive Radio Frequency The Home Producer is not operating your Bang amp Olufsen equipment Some Bang amp Olufsen prod ucts as well as some other manufacturer s equipment operate at a frequency higher than 100 kHz and will not work with the Home Producer 51 ERROR MESSAGES Eror Meaning MEM FULL Maximum memory capacity has been reached BATTERY LO Replace batteries with four new AAA Alkaline batteries TOO L
52. on of what function each key will perform by device type e g TV VCR CBL SAT etc please refer to pages 52 through 64 7 SETTING THE CLOCK To set up the CLOCK TIME on the display screen 1 0 MENU 98 MENU MENU 95 MENU 2 Press and hold SETUP until the display screen changes from DEVICE and the TIME to TIMED SEQ Press the MENU key twice the display will change to CONFIGURE Press SELECT the display will change to THEATR SEL Press MENU one time the display will change to TIME SETUP Press SELECT again The display will change to TIME and the first digit in the time will blink Enter either a 0 or a 1 then the next digit in the time will begin to blink continue entering the time until all four digits of the time have been set After the time has been set AM PM will then blink Press MENU to toggle between AM and PM once AM or PM is selected press SELECT The display will then change to the day of the week i e MON TUE WED THU FRI SAT or SUN Use MENU to toggle through the days until the proper day of the week is displayed on the screen then press SELECT The display will return to the DEVICE and the TIME screen with the correct time on the display NOTE After changing the batteries you will have to reprogram the clock 8 QUICK SEFUP To Quickly Set Up the Home Producer to Operate Your
53. ontrol D The TV SAT key operates the same as the TV SAT key on your original Satellite remote control The PREV CH Previous Channel key operates the same as the LAST CHANNEL or RECALL key on your original Satellite remote control The DISPLAY key SHIFT PREV CH operates the display on your Satellite receiver The PIP key operates the same as the VIEW key on your original Satellite remote control The MOVE PIP key operates the same as the NEXT key on your original Satellite remote control 60 DSS amp Satellite Functions cont The MENU key operates the same as the MENU or OSD On Screen Display key on your original re C3 mote Use the MENU Up MENU Down Left and Right gt to navigate through your menus If your original remote con trol had a Select Enter key for use in your menu use SELECT or ENTER MENU Receiver Tuner Functions 0 9 The Digit keys 0 9 access the different inputs of your Receiver The TV SAT key operates the same as the INPUT key on your original Receiver remote control The PREV CH Previous Channel key operates the same as the RAN DOM CD function key on your original remote control The DISPLAY key SHIFT PREV CH operates the display on your Receiver The MENU key operates the same as the PROGRAM key on your orig inal remote control The SELECT key operates the TAPE MON function on your origi nal Receiver r
54. original purchase This warranty does not cover damage or failures caused by products or services not supplied by One For All or which result from accident misuse abuse neglect mis handling misapplication faulty installation set up adjust ment improper maintenance alteration maladjustment of consumer controls modifications commercial use or that is attributable to acts of God There are no express warranties except as listed above OFA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU LAR PURPOSE ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above exclusions or limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state To obtain warranty service for a defective product during the warranty period please return the product preferably in the original carton along with your purchase receipt to the store of original purchase A note detailing the com plaint would be helpful The store at its option will replace or repair this product if found to be defective One For All 330 405 8
55. s You can use the Home Producer to operate a sec ond TV or a second VCR or any combination of eight devices To do this you must re assign one of the device keys i e TV VCR DVD CBL SAT TUNER AMP CD or AUX1 to operate your sec ond device For example to re assign one of the device keys to support your other components 1 Press and hold SETUP until the display screen changes from DVD LDP and the TIME to TIMED SEQ x2 Press the MENU key twice The display screen will change to CONFIGURE Press SELECT The display will change to THEATR SEL p MENU x3 Press the MENU key three times The display screen will change to MODE MAP Press SELECT The display will change to SOURCE 5 MENU 26 Re assigning Device Keys cont 4 Device Key Press the device key you would like to move The display screen will change to COPY TO Press the unused device key you would like to replace The display will change to DEVICE2 and the TIME Proceed with programming the re assigned device key with the appropriate code Set Up Codes for Casse Aiwa 0029 0197 0200 Akai 0283 Bang amp Olufsen 0219 Carver 0029 Denon 0076 Fisher 0074 Garrard 0308 0439 Harman Kardon 0182 0029 JVC 0244 0273 Kenwood 0070 0071 Magnavox 0029 Marantz 0029 0009 Mitsubishi 0283 Onkyo 0135 0136 0282 Set Up Codes for Home GE 0240 LiteTouch 0084 Lutron 0318 One For All 0167
56. s own built in sleep timer The CENTER and REAR SHIFT CENTER keys function the same as the ADD and DELETE keys on your original TV remote control 54 KEY INDEX cont VCR Functions The VCR transport keys PLAY REW FF STOP PAU and REC access the features of your VCR As a Safety feature on the Home Producer you must press the REC key twice NOTE The SHIFT key accesses advanced features that are mapped under the VCR keys SHIFT PLAY SLOW SHIFT REW SLOW SHIFT FF SLOW SHIFT STOP EJECT and SHIFT PAUSE X2 0 9 The Digit keys 0 9 control direct channel access the same as the Digit keys on your original remote NOTE If your original remote control required you to use an Enter key to change channels use the ENTER key on the Home Producer after entering your channel number The ENTER key operates the same as the Enter key on your original VCR remote control The TV SAT key operates the same gt as the TV VCR key on your original VCR remote control The PREV CH Previous Channel key operates the same as the LAST CHANNEL or RECALL key on your original VCR remote control The DISPLAY key SHIFT PREV CH operates the display on your VCR The PIP key accesses your VCR s Picture in Picture feature P The FREEZE key SHIFT PIP freezes your Picture In Picture window The SWAP key swaps the Picture in Picture window and the main picture MENU N
57. s when you press a key The Home Producer Try all of the codes listed for does not operate your brand of home entertain your home entertain ment component in the Set ment component Up Codes section If this does not work try searching for your code Make sure the home entertainment com ponent you are setting up is able to be operated with an infrared remote control The Home Producer Try all of the codes listed for is not performing your brand of home enter commands properly tainment component in the Set Up Codes section Many set up codes may allow some degree of operation However only one set up code will work correctly with your home entertainment component You make a mistake During any set up procedure when setting up your except for Macros and Timed Home Producer Sequences pressing ESC will return you to DEVICE and the TIME screen without saving If you make a mistake program ming a Timed Sequence return to the Timed Sequence menu and delete it If you make a mistake when saving a macro erase it by re saving a new macro on the same key VCR not recording As a safety feature on the Home Producer you must press the REC key twice 50 TROUBLESHOOTING cont Problem Solution CH and PREV CH not working for your RCA TV Due to RCA design 1983 1987 only the original remote control will operate these functions Problems changing chan
58. select the device that will control your Volume in the Home Theater Device Key Mode Use the device keys AMP TUNER TV CBL SAT or DVD to choose your AUDIO selection Once you choose the AUDIO source press SELECT For example if your Tuner will control your volume in the Home Theater Mode press TUNER SELECT The display will change to CHAN NEL This will allow you to choose the device that will control your channel changing MENU continued on next page 30 SETTING UP THE HOME THEATER KEY cont Device Key Device Key Device Key Device Key Press SELECT This will change the display to TV Use the device keys TV VCR CBL SAT or DVD to choose your CHANNEL source then press SELECT For example if your Satellite will control channel chang ing in the Home Theater Mode press CBL SAT SELECT The dis play will change to PLAYBACK This will allow you to choose the device that will control the transport keys PLAY REW FF PAUSE STOP and REC Press SELECT This will change the display to VCR Use the device keys CD VCR or DVD to choose your PLAYBACK source then press SELECT For example if your DVD Player will control playback in the Home Theater Mode press DVD SELECT The display will change to PIP This will allow you to select the device that will control your Picture in Picture features Press SELECT This will change the display to TV Use
59. ss SELECT once more and the display will return to DEVICE and the TIME Your Home Producer is now reset gt lt 45 SETTING UP AND USING THE IF RF COMMAND CENTER The Home Producer comes with an IR RF Command Center which receives Radio Frequency RF signals from your Home Producer anywhere in your home up to 100 feet away The Command Center then converts the RF signal into an Infrared signal to control your home theater components To setup the Command Center 1 Find a location approximately 8 feet in front of your home theater components NOTE The location should have access to both your equipment line of sight and an outlet to plug in the Command Center 2 Plug the Command Center s Power Cord and raise the telescoping antenna Telescoping Antenna IR Lens 3 Position the Command Center so the black IR lens is aimed at your home theater com ponents 4 Test the Command Center by pressing the POWER key on the Home Producer Your components should operate from any room in your home up to 100 feet away NOTE The Home Producer transmits both an IR and an sig nal simultaneously When you are testing the Command Center with Home Producer make sure that the remote control is not aimed at your equipment 46 SETTING UP AND USING COMMAND CENTER cont The Command Center also includes an additional IR signal extension cord for use with a component that is not in
60. t is also used to make selections in your on screen menus The CLEAR key SHIFT SELECT is used to exit or cancel selections in your on screen menus The MENU Up MENU Down Left and Right are used to navigate through your on screen menus MENU and MENU are also used to navigate through the LCD Screen menu The VCR transport keys i e PLAY REW FF STOP PAU and REC access the features of your VCR The SLEEP key SHIFT MUTE accesses the sleep timer on your TV Even if your TV does not have a sleep timer the Home Producer can access its own built in sleep timer The CENTER and REAR SHIFT CENTER keys function the same as ADD and DELETE keys on your original Cable Box remote control The SUR Surround key functions the same as the FC or FAV Favor ite Channel key on your original Cable Box remote control 58 DVD LD Cassette Functions The VCR transport keys i e PLAY REW FF STOP PAU and REC access the features of your Cassette Deck or DVD LD Player NOTE The SHIFT key accesses advanced features that are mapped under the VCR keys SHIFT PLAY SLOW SHIFT REW SLOW SHIFT FF SLOW SHIFT STOP EJECT and SHIFT PAUSE X2 0 9 The Digit keys 0 9 control direct channel access the same as the Digit keys on your original remote NOTE If your original remote control required you to use an Enter key to change channels use the ENTER key on the Home Pro
61. ta 0008 0477 0017 press SELECT Point the remote Focus 0400 Seam 0510 control at the Satellite and press GC Electronics 0056 0207 Signal 0015 0040 Gian POWER Your Satellite should turn Gemini 0015 Sprucer 0021 OFF If your Satellite turns OFF General Starcom 0009 0015 press the ESC key to return the dis Instrument 0476 0276 0011 0810 Stargate 0015 0040 0797 h If GoldStar 0144 0040 Starquest 0015 play to SAT and the TIME your Goodmind 0797 Sylvania 0001 Satellite does not turn OFF enter Hamlin 0020 0259 0009 0034 TFC 0310 Hitachi 0011 0063 the next code in the code list then Hytex 0007 Tandy 0258 press SELECT followed by POWER Jasco 0015 0153 0315 Teleview 0040 j j Jerrold 0003 0012 0476 0276 Texscan 0001 Once the correct code is 0014 0015 0011 0810 Timeless 0418 tered press the ESC key to return Linsay Tocom 00120019 the display to SAT and the TIME Magnavox 0014 0027 Toshiba 0000 Memorex 0000 Tusa 0015 MovieTime 0063 0156 Unika 0153 0022 0207 For a detailed explanation of what function each key NAP 0007 United Artists 0007 will perform in the Satellite mode please refer to NSC 0063 0156 Universal 0153 0022 0056 0191 page 59 in the Key Index Novaplex 0618 0207 Oak 0019 0007 Videoway 0250 Optimus 0021 Viewstar 0063 0027 0258 Panasonic 0000 0107 0021 Zenith 0008 0000 0015 0207 Set Up Codes for DSS and Satellite Receivers Panther 063
62. the device keys TV CBL SAT or VCR to choose your PICTURE IN PICTURE source then press SELECT For example if your will control Picture in Picture features in the Home Theater Mode press VCR SELECT The display will change to MENU This will allow you to select the device that will control your Menu features Press SELECT This will change the display to CABLE Use the device keysTV CBL SAT VCR TUNER or DVD to choose your MENU source then press SELECT For example if your DSS will control your Menu features in the Home Theater Mode press CBL SAT SELECT The display will then return to the DEVICE and the TIME screen 31 After setting up the HOME THEATER Mode key you can then set up a macro sequence on the POWER key in the Home Theater Mode This macro will allow you to power ON all of your components in the Home Theater mode with the press of one key Power Key Macro Powering ON Your Home Theater Components with One Key Press 8 gt x lt N Sequence 0 Press and release the HOME THEATER Mode key then press and hold SETUP until the display screen changes from THEATER and the TIME to TIMED SEQ Press the MENU key twice the display will change to CONFIGURE Press SELECT the display will change to THEATR SEL Press MENU four times until the display reads KEY MACRO Press SELECT The display will read SEL MACKEY Press the P
63. your original CD Player remote control The PREV CH Previous Channel key operates the same as the RAN DOM key on your original CD Player remote control The DISPLAY key SHIFT PREV CH operates the display on your CD Player The MENU key operates the same as the PROGRAM key on your orig inal remote control The SELECT key operates the DISK SELECT function on your original CD Player remote control BE The MENU Up and MENU o Down keys access TRACK GBS TRACK respectively MENU Left and MENU Right access DISK and DISK respectively The SUR Surround key functions the same as the 10 key on your original remote control MENU 64 KEY INDEX cont Home Automation Functions D The POWER key operates the same as the ALL key of your original remote 0 9 The Digit keys 0 9 control direct track access the same as the digit keys on your original remote control The VOL keys operate the same as the BRIGHT and DIM keys on your original remote control The CH keys operate the same as ON and OFF keys respectively The MUTE key operates the same as the ALL OFF key on your origi nal remote control 65 WARRANTY One For All PRODUCTS Limited Warranty One For All warrants to the original purchaser only that this product will be free from defects in materials and workmanship under normal use for ninety 90 days from the date of

One For ALL URC 9800 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents