Omnitron Systems Technology Universal DIN Rail Mounting Bracket 8250-0 User's Manual
Contents
1. Model 8250 0 OST Omnitron Systems Technology Inc UniDIN DIN Rail Mounting Bracket Kit for FlexPoint and iConverter User Manual OVERVIEW The Omnitron Universal DIN Rail Mounting Bracket model 8250 0 is designed to provide DIN Rail mounting capabilities for the FlexPoint converter FlexPoint converter with DC Adapter tConverter Stand Alone and iConverter 1 module chassis This kit contains all the necessary components to provide DIN Rail mounting for several different mounting orientations Figure 1 Pre assembled Configuration Mounting Orientation B MOUNTING ORIENTATIONS This diagram illustrates a converter in four different DIN Rail mounting orientations As shipped from the factory the UniDIN is ready to be used in configuration B ES amp D Figure 2 Mounting Orientations PACKAGE CONTENTS Item i Item j Item k S 0 D gt gt o ALEX fs Ni 2 z 3B CS 2 DIN Rail Bracket 2 DIN Rail Bracket Hex 2 DIN Rail Clips Halves Pre assembled Nuts Pre assembled Pre assembled Item m Item n Migs Ne F F 2 DIN Rail Clip Screws 4 Bracket Mounting User Manual Pre assembled Screws In separate bag ASSEMBLY AND MOUNTING INSTRUCTIONS STEP 1 Adjusting Bracket Width If bracket width adjustment is necessary loosen the hex nuts j on the DIN Rail bracket i and align the DIN Rail bracket width to match the width of the medi2. a converter After adjusting the DIN Rail bracket to the desired width tighten the hex nuts j to lock the DIN Rail bracket width Rear Cover Screw Front Cover Screw ae COE LLL N Converter Figure 3 Adjusting Bracket Width to Match Width of Media Converter STEP 2 Optional Orientation Reconfiguration lf the desired mounting orientation is other than B as illustrated in Fig 2 remove the DIN Rail clips k from the bracket by removing the DIN Rail clip screws m Determine the desired DIN Rail mounting orientation from the Figure 2 and match the corresponding DIN Rail clip orientation in Figure 4 Attach the DIN Rail clips K to the DIN Rail bracket holes in the DIN Rail Bracket 1 and secure the DIN Rail clips K with DIN Rail clip screws m pom a ol a To A B Keo sy Aland D Figure 4 Configuring Clip Mounting Orientation STEP 3 Attaching Bracket to Converter Remove the rear cover screws from the media converter casing Align the media converter to the bracket mounting holes that correspond with desired orientation then insert and fasten the supplied bracket mounting screws n to secure the media converter to the DIN Rail bracket 1 B C and D Front Cover A Screw Converter Figure 5 Attaching Bracket to Converter STEP 4 Mounting Converter to the DIN Rail Attach the assembly t
3. o the DIN Rail by aligning the hooks on the DIN Rail clip k to the upper edge of the DIN Rail Rotate the assembly downward until the DIN Rail clip tab engages and snaps to the bottom edge of the DIN Rail Note that the tab on the DIN Rail clip should always attach to the bottom of the DIN Rail Connect the external power supply to the rear of the installed media converter Hooks on the i DIN Rail Clip DIN Rail Cross Section Close Up Tab on the DIN Rail Clip Mount Dismount Figure 6 Mounting Dismounting Converter to from DIN Rail Dismounting from DIN Rail To remove the converter assembly from the DIN Rail hold the converter and rotate upward to disengage the clip TECHNICAL SUPPORT For help with this product contact our Technical Support Omnitron Systems Technology Inc Phone 949 250 6510 Fax 949 250 6514 Address 140 Technology Dr 500 Irvine CA 92618 USA Email support omnitron systems com URL www omnitron systems com Form 040 08250 001B 9 07 Patent Pending
Download Pdf Manuals
Related Search