Oliso Touch & Glide User's Manual
Contents
1. auto shut off system If the Touch amp Glide iron is not being used while it is plugged in the status light will flash red and the iron will turn itself off The auto shut off timing depends on whether the Auto Lift system is turned on or off The iron will return to normal operation once you resume ironing Auto Lift on A Auto Lift off lt a iron position auto shut off timing iron position 30 seconds after 8 minutes unused spacers lift iron 22 8 minutes vertical 8 minutes vertical 30 seconds knocked over cae 30 seconds knocked over when the Auto Lift system is off and the iron is left unused in a horizontal position for more than 30 seconds the spacers will raise the iron to prevent burning your fabric or ironing surface after ironing a Turn the fabric selector knob to off Slide the steam selector to off gt b Unplug the appliance Do not hold iron while unplugging or the Auto Lift spacers will not stay down c Place iron on the Auto Lift spacers and allow to cool d Important Empty water from the water tank after use Tilt the Touch amp Glide forward to drain from the spout at the front of the iron To drain faster open the Flip Funnel e For easy storage the power cord can be wound loosely around the Touch amp Glide once the iron has cooled sufficiently maintenance The soleplate should be cleaned if starch or other residue bu2. does not steam iron is not hot enough the fabric selector knob must be set to the cotton or linen settings to produce even steam steam selector set to off steam selector must be turned to a setting steam valve is clogged move the steam selector from off gt to the max Ei settings a few times to unclog iron leaks Auto Lift is off and iron is horizontal when the Auto Lift switch is set to off always store the iron in the vertical position iron is not hot enough make sure the fabric selector knob is set to the cotton or linen range to ensure proper steam production steam burst button is overused allow 3 seconds between uses of the steam burst function iron is emitting a brown or white substance water hardness may be too high Switch to either spring water or half tap half distilled water mixture See the water tank page for more information One 1 Year Limited Warranty Oliso Inc warrants that for a period of one year from the date of the original purchase this product will be free from defects in material and workmanship when utilized for normal household use Oliso Inc will repair or replace this product or any component of the product found to be defective during the warranty period without charge to the customer If a replacement product is sent it will carry the remaining warranty of the original product Replacement will be made with a
3. new or remanufactured product or component If the product is no longer available replacement may be made with a similar product of equal or greater value This is your exclusive warranty This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable Keep the original sales receipt Proof of purchase is required to obtain warranty performance Oliso Inc dealers or retail stores selling Oliso Inc products do not have the right to alter modify or in any way change the terms and conditions of this warranty The liability of Oliso Inc is limited solely to the cost of repair or replacement of the product at its option This warranty does not cover nor mal wear of parts and does not apply to any product that has been tampered with or used for commercial purposes This warranty does not cover damage caused by misuse abuse use on improper voltage or current use contrary to the operating instructions negligent handling or damage due to faulty packaging or mishandling in transit This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs service or alteration to the product or any of its parts which have been performed by a repair person not authorized by Oliso Inc Further the warranty does not cover Acts of God such as fire flood hurricanes and tornados This warranty is extended to the original purchaser of the product and excludes all o
4. amp Glide iron status light Hy L Smart Touch handle SS Auto Lift override switch uw Flipo Funnel water tank steam button spray button steam selector electronic fabric selector knob drain spout spray nozzle Flow Glide soleplate Auto Lift spacers Auto Lift system To operate place the iron on its soleplate on Simply touch the iron handle and the iron a flat surface Plug the iron into an outlet and will sense your hand and lower Any time make sure the Auto Lift switch is in the on you release the handle the spacers will 48 position automatically raise the iron to protect your fabric overriding the Auto Lift system If you wish to turn off the Auto Lift system move the switch on the back of the iron to the off 4a position Your Touch amp Glide will now operate like a standard iron If the iron is left in the horizontal position for more than 30 seconds the Auto Lift spacers will raise This will prevent the iron from burning your fabric or ironing surface Touch the iron handle and the iron will lower You can restore Auto Lift by returning the switch to the on position water tank Before filling slide the steam selector to off gt Make sure the iron is unplugged Open the Flip Funnel Leave the iron ina horizontal position and fill using the included fi
5. call 1 800 899 5157 oliso Touch amp Glide For product questions Oliso Customer Service customerservice oliso com www oliso com 1 800 899 5157 2005 Oliso Inc All rights reserved Touch amp Glide Auto Lift Flow Glide Flip Funnel and Smart Touch are trademarks of Oliso Inc Printed in China U S Patent No 6453587 Patent Pending
6. eee Ly Le Touch amp Glide instruction manual IMPORTANT SAFETY INSTRUCTIONS When using your flatiron basic safety precautions should always be followed including the following Read all instructions before using this product 1 Use iron only for its intended use 2 To protect against a risk of electric shock do not immerse the iron in water or other liquids 3 The iron should always be turned to Off before plugging or unplugging from the outlet Never yank cord to disconnect from the outlet instead grasp plug and pull to disconnect 4 Do not allow cord to touch hot surfaces Let iron cool completely before putting away Loop cord loosely around iron when storing 5 Always disconnect iron from electrical outlet when filling with water or emptying and when not in use 6 Do not operate iron with a damaged cord or if the iron has been dropped or damaged To avoid the risk of electric shock do not disassemble the iron take it to a qualified serviceman for examination and repair Incorrect reassembly can cause a risk of electric shock when the iron is used 7 Do not allow children to use iron Close supervision is necessary for any appliance being used near children Do not leave iron unattended while connected or on an ironing board 8 Burns can occur from touching hot metal parts hot water or steam Use caution when you turn a steam iron upside down there may be hot water in the reservoir 9 If the malf
7. ild up When the iron is cool wipe the soleplate with a soft damp cloth Do not use abrasive cleaners or scouring pads as this will damage the non stick coating Mineral deposits from tap water can occur in the soleplate vents To clean fill the water tank and heat the iron to the linen fabric setting Once the iron is fully heated unplug the iron and hold over a sink Press the steam button repeatedly until water begins to drip out of the soleplate Be careful as this creates large amounts of steam To ensure optimal steam production the steam valve should be regularly cleared of accumulated debris and minerals This is done by moving the steam selector back and forth from the off gt to the max EM steam settings several times trouble shooting guide Fa PROBLEM iron does not heat THINGS TO CHECK fabric selector knob is set to off SOLUTION turn the fabric selector knob to a fabric setting iron not plugged in correctly check to make sure the plug is properly seated in the socket auto shut off system is activated touch the handle spacers do not come out Auto Lift switch set to off set the switch on the back of the iron to the on position iron not plugged in correctly check to make sure the plug is properly seated in the socket Smart Touch handle activated move your hand away from the iron and the Auto Lift system will raise the soleplate iron
8. ll cup Two fill cups equal the maximum capacity of the water tank Alternatively fill directly from a faucet holding the iron horizontally Do not fill the tank past the MAX fill line on the side of the iron Close the port when done 4 If you need to add water during ironing unplug the iron and repeat the above steps After filling make sure the iron is fully reheated before ironing CO aaa S O water recommendations This iron is designed to be used with regular tap water If your water is over 12 grams of hardness we recommend using either inexpensive bottled spring water or mixing half tap water with half distilled water Never use 100 distilled water as this can cause the iron to spit and leak fabric selector off nylon silk polyester blend wool cotton linen e eoo _ temperature is too low for steam A steam ok ij J Turn the grey fabric selector knob to select a fabric setting To use constant steam or steam burst the temperature must be set to the cotton linen range eee fabric selector knob flashing green green flashing red heating or cooling at set temp auto shut off The Touch amp Glide iron uses a status light to display the iron s status To ensure correct temperature wait until the light displays steady green before ironing status light team spr tem ap ow steam spray s
9. ther legal and or conventional warranties The respon sibility of Oliso Inc is limited to the specific obligations expressly assumed by it under the terms of the limited warranty In no event shall Oliso Inc be liable for any incidental or consequential damages caused by breach of any express implied or statutory warranty or condition Except to the extent prohibited by law any implied warranty or condition of merchantability or fitness for a particular purchase is limited in duration to the duration of the above warranty Oliso Inc disclaims all other warranties conditions or representations express implied statutory or otherwise In no event shall Oliso Inc be liable for any indirect special incidental or consequential losses or damages including but not limited to interruption of business or loss of business or profit resulting from the use of or inability to use the product any breach of contract fundamental or otherwise or for any claim brought against purchaser by any other party Some states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above limitations or exclusion may not apply to you If you have any question regarding this warranty or would like to obtain warranty service please email Oliso Inc at customerservice oliso com and a service center address will be provided to you If you have further questions you may
10. unction indicator goes on the flatiron is not operating normally Disconnect from the power supply and have the flatiron serviced by qualified service personnel 10 When using vertical steam function do not point the iron towards yourself or anybody else SPECIAL INSTRUCTIONS 1 This is a 1440 watt appliance To avoid a circuit overload do not operate another high wattage appliance on the same circuit 2 If an extension cord is absolutely necessary a 12 ampere cord should be used Cords rated for less amperage may overheat Care should be taken to arrange the cord so that it cannot be pulled or tripped over SAVE THESE INSTRUCTIONS Welcome Thank you for purchasing the Oliso Touch amp Glide iron You re just a few steps away from a whole new way of ironing Follow the instructions in this manual to learn about your new iron s features and care We hope you enjoy your Oliso Touch amp Glide oliso Touch Glide 3 simple steps to start Open the Flip Funnel and add water to the Plug in then choose a fabric setting tank with the fill cup or directly from a faucet oD OM i AY Ul e GE When the blinking green light becomes steady touch the handle and iron eke Enjoy your Touch amp Glide If you would like to learn more about your iron s unique features please read on ry getting to know your Touch
11. yste DP Em x T i N N Steam Selector Slide the steam selector to set the amount of constant steam The iron can only produce steam when the fabric selector knob is set to the cotton or linen range eee Allow the iron to heat up steady green status light before activating the steam control Steam will be produced as soon as the iron is lowered Dry Ironing To turn off the steam slide the steam selector off Auto Anti Drip Your Touch amp Glide iron has an anti drip feature which shuts off steam production any time the iron is raised by the Auto Lift spacers This prevents unwanted steam while the iron is standing This feature also reduces water dripping from the soleplate while the iron is not hot enough to produce steam To prevent dripping entirely keep the steam selector in the off position N Spray e press the spray button for a strong mist spray e the spray will help with wrinkle removal Burst of Steam e firmly press the steam button for a strong burst of steam from the soleplate e the steam button can only be used when the iron is heated to the cotton or linen range eee e wait at least 3 seconds between each press of steam button Vertical Steam e to steam vertically press the steam button while holding the iron upright e this is useful for getting creases and wrinkles out of hanging clothes or curtains e wait at least 3 seconds between each press of the steam button
Download Pdf Manuals
Related Search