Numark Industries CM-100 User's Manual
Contents
1. Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for long periods of time Damage Requiring Service Only qualified personnel should service this product If you have any questions about service please contact Numark at the number s shown on the back cover of this manual Grounding or Polarization Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated Internal External Voltage Selectors Internal or external voltage selector switches if any should only be reset and re equipped with a proper plug for alternative voltage by a qualified service technician Do not attempt to alter this yourself WARNING To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture Electrical equipment should NEVER be kept or stored in damp environments SERVICE INSTRUCTIONS Disconnect power cord before servicing Replace critical components only with factory parts or recommended equivalents For AC line powered units Before returning repaired unit to user use an ohmmeter to measure from both AC plug blades to all exposed metallic parts The resistance should be no more than 100 000ohms The Leader DJ Technology 1999 Numark Industries http Awww numark com CM100 VERY IMPORTANT Please read this entire manual before connecting this unit to y2. Split Blend controls how PFL and Program audio are sent to your headphones Insplit mode the PFL audio can be heard in your left ear and PGM audio can be heard in your right ear In blend mode both PFL and PGM can be heard in both ears Headphone Mix controls the mix of PFL and signals to your headphones When the slider is moved to the left all you will hear is the cue source When the slider is all the way right you will hear what is playing through the master output By blending beats can be matched exactly and segues can be smooth when a song is cued Headphone Level to adjust cue volume Headphone Input for your 1 4 headphone 12V BNC Connector allows a 12 volt gooseneck lamp to be connected directly to the mixer This light is readily available from your Numark dealer Power Button turns unit off and on The Leader DJ Technology 1999 Numark Industries 9 http www numark com CM100 27 28 29 30 31 REAR PANEL FEATURES 38 29 28 Oo 36 OO Phono Inputs for attaching your turntables When these connectors are used your signal is fed directly to the high quality RIAA phono pre amplifiers Use this position only for turntables Line level sources will overload the sensitive phono pre amps and will cause distortion Grounding lug for turntable connection Always u
3. Numark Professional Disc Jockey Products CM 100 PROFESSIONAL DJ MIXER 099255555500 Se O USER S MANUAL 1999 Numark Industries http www numark com CM100 Safety Information AN CAUTION RISK OF ELECTRIC SHOCK AN DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanvina this appliance CAUTION FOR USA amp CANADIAN MODELS ONLY TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE SAFETY INSTRUCTIONS a b 5 Read Instructions All the safety and operating instructions should be read before this product is connected and used Retain Instructions The safety and operating instructions should be kept for future reference Heed Warnings
4. All warnings on this product and in these operating instructions should be followed Follow Instructions All operating and other instructions should be followed Water and Moisture This product should be kept away from direct contact with liquids Heat Avoid placing this product to close to any high heat sources such as radiators Ventilation The appliance should be situated so that it s location or position does not interfere with it s proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation opening or placed in a built installation such as bookcase or cabinet that may impede the flow of air through the ventilation openings h k D m n Power Sources This product should be connected to power supply only of the type described in these operating instructions or as marked on the unit Power Cord Protection Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them When removing the cord from a power outlet be sure to remove it by holding the ma plug attachment and not by pulling on the cord 9 Object and Liquid Entry Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer Cleaning The appliance should be cleaned only as recommended by the manufacturer
5. jeopardize the customer s warranty Numark will not accept COD shipments and no call tags will be issued for merchandise return f writing with merchandise returned g defective Numark equipment should be sent FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and original sales Phone 1 401 295 9000 Fax 1 401 295 5200 Web www numark com
6. amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for 2 Years The warranty is extended to 3 Years with the completion of the warranty card provided that the warranty card is completed and returned within 30 days from the date of purchase All other NUMARK products are warranted for 1 Year including but not limited to CD players CD Mix Stations turntables preamplifiers beatkeepers equalizers microphones headphones and all other accessories What is not covered This Limited Warranty is conditioned upon proper use of the pro duct by the purchaser 2 This Limited Warranty does not cover a defects or damage resulting from accident misuse abuse neglect unusual physical or electrical stress modification of any part of the product or cosmetic damage b equipment that has the serial number removed or made illegible c all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use d defects or damage from improper testing operation maintenance installation adjustment or service of the mixers e crossfaders 3 What are NUMARK S obligations During the applicable warranty period NUMARK will repair or replace at NUMARK S sole discretion without charge to the purchaser any de
7. for stereo or mono operation Panning adjusts the balance of right to left audio Booth Zone Fader controls speaker volume for a remote zone or booth monitors NOTE This can also be used to supply line level audio to a lighting controller or to lights that are sound activated Meter Assign determines whether pre fader or master audio is sent to the stereo LED meter PFL signal is determined by the cue assign switches Stereo Auto Peak Hold Level Indicator quickly and accurately tracks level of audio sent to it by the meter assign The red LEDs for 3dB 5dB and 8dB hold program peaks for a second or two With peak metering it s OK to be in the red as long as 5dB or 8dB aren t constantly 1 When using as a master output meter set the crossover equalizer and power amp inputs to avoid distortion at each step in the audio chain Proper attention to the peak meter results in the punchiest possible sound without audible distortion When used to adjust the PFL levels accurately match channel levels with the Pre fader gain controls before mixing them together The idea is to properly match PFL inputs not the input with the stereo output meter HEADPHONE CUEING Channel Cue Send Assign are used to route PFL channel audio to the Monitor Section The channel faders do not control the Cue send volume This audio is also sent to a rear panel output for use with an external sampler or other source such as booth monitor
8. CM100 QUICK SETUP DIAGRAM Study this setup diagram Make sure all faders are at zero all devices are off First connect all stereo input sources Next connect your microphone s and monitor headphones Finally connect the stereo outputs to the power amplifier s and or audio sources Plug your mixer into AC power Now you are ready to switch everything on Always switch on your audio input sources such as turntables or CD players first then your mixer and finally any amplifiers When turning off always reverse this operation by turning off amplifiers then your mixer and then input devices Main Balanced EE Sound System f w Amplifier Turntable 2 Turntable 3 OT Keyboard on Turntable 1 AC Outlet Dual CD Player CL CI ENTIER Ooo T Tape Deck HS S Digital Sampler EF Sound System EEE w Amplifier Numark The Leader in DJ Technology 1999 Numark Industries 7 http Awww numark com CM100 MIXER FEATURES 3 6 2 oe T 5 07 1 We have divided this section into various functional blocks Inputs Microphone Crossfader Equalizer Outputs and Headphone Cueing It is important to learn how each of these work INPUTS Input faders control individual source levels in the mix Input Toggle Switches select which source will be live to that channel bas
9. FADER Crossfader Assign Knob determines which input channel will be heard when the crossfader is moved towards the knob Note All channels not assigned will remain active Replaceable Crossfader achieves clean segues between the two input channels selected by the Crossfader Assign O Ht 11 In this example Hard left selects Channel 1 and Hard right selects Channel 4 With the crossfader centered both assigned channels are live Use the crossfader for fast and seamless segues from one selected channel to the other Note The crossfader is user replaceable in case of failure Simply unscrew the two large screws that hold it in place lift it out and disconnect its cable Re attach the new crossfader and screw the mounting plate back onto the unit you re back in business Fader Start activates the crossfader to send play and cue commands to your auto start Numark CD player other popular brand For fader start attach your mixer to a remote start CD player using industry standard 1 8 3 5mm cables When you move the crossfader toward the active channel the attached CD player will start When it is moved away that side will cue similar to pressing the cue button The Leader DJ Technology 1999 Numark Industries 8 http Awww numark com EQUALIZER 12 5 Band Stereo Graphic Equalizer EQ compensates for differences in source material sound quality In ultra com
10. OSE ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY EXCEPT TO THE EXTENT PROHIBITED BY AP PLICABLE LAW NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL INCIDENTAL CONSEQUENTIAL INDIRECT OR SIMILAR DAMAGES LOSS OF PROFITS DAMAGES TO PURCHASER S PROPERTY OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE MISUSE OR INABILITY TO USE ANY NUMARK MIXER BREACH OF WARRANTY OR NEGLIGENCE INCLUDING BUT NOT LIMITED TO NUMARK S OWN NEGLIGENCE EVEN IF NUMARK OR ITS AGENT HAS BEEN ADVISED OF SUCH DAMAGES OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK S MIXERS AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE OR IGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER S EXCLUSIVE REMEDY IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS 5 This Limited Warranty allocates risk of product failure between purchaser and NUMARK and NUMARK S product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty The agents employees distributors a nd
11. dealers of NUMARK are not authorized to make modifications to this Limited Warranty or make additional warranties binding on NUMARK Accordingly additional statements such as dealer advertising or presentation whether oral or written do not constitute warranties by NUMARK and should not be relied upon 6 does state law apply to this warranty SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATIONS OR 7 This Limited Warranty gives you specific legal rights You may also have other rig RETURN INFORMATION receipt enclosed to Numark INDUSTRIES Attention Service Department 11 Helmsman Avenue North Kingstown RI 02852 USA EXCLUSIONS MAY NOT APPLY TO PURCHASER hts which vary from one jurisdiction to another ipment to be repaired under warranty One additional outer layer of packaging must be included to ensure product safety Failure to do so may inadequately protect the equipment in transit and Numark will not return repaired merchandise to customers by priority service unless by written request at the customer s cost Requests must be submitted a Return Authorization number must be obtained from Numark through the address or phone numbers below b copy of the original sales receipt must also be included for the equ c faulty equipment must be packed in its original packaging d therefore
12. e CM100 features all new circuitry and the latest in manufacturing and design technology to give you greater quality and better reliability than ever before The fader start technology is designed to work with Numark fader start CD players as well as other popular brands The CM100 brings to you the finest quality of DJ equipment available today Thank you for buying Numark DJ products FEATURES e 8 line phono 2 mic inputs e Fader Start Crossfader with front panel controls e Split blend cue options e Panning on master fader with stereo mono switch e 5 band 6 12dB EQ with rear panel defeat e Master balanced XLR outputs with Stereo Mono controls e Cues on each channel with cue send rear output for sampling and booth cue monitor e Channel gain control with PFL meter e Neutrik Combo connector 1 4 XLR plug for DJ Mic e Auto talkover mic input with bass treble e Tape Out for direct recording e Front panel BNC light connector e Zone output The Leader DJ Technology 1999 Numark Industries 4 http Awww numark com CM100 TABLE OF CONTENTS Safety Measures 2 Important Information 3 Registration 3 Introduction 4 Quick Setup Diagram 7 Description of the Features 8 Specifications 11 Warranty 12 Numark The Leader in DJ Technology 1999 Numark Industries 5 http Awww numark com CM100 The Leader DJ Technology 1999 Numark Industries 6 http Awww numark com
13. ed on what you have connected to the rear panel input section Pre fader Gain Controls adjust the pre fader volume for cleaner sound MICROPHONE Mic Gain Controls The DJ Mic Fader controls the DJ Mic volume for the Neutrik Combo connector The Mic 2 Fader controls the Mic volume for the 1 4 connector on the rear of the mixer Mic Talkover On Auto Talkover Switch controls DJ Mic only Mic 2 activation is controlled only through the Mic 2 level fader Talkover turns down the input level of your music sources from Channels 1 4 Auto Talkover automatically reduces the input level of Channels 1 4 This works with the talk over sensitivity adjustment Talkover is very useful for making announcements without adjusting any levels Talkover sensitivity adjust determines the point in which auto talkover activates The more sensitive the adjustment the quieter you need to speak into your microphone to activate auto talkover Treble and Bass Controls for fine tuning the tone of your voice on both mics through the sound system The controls are detented for setting tone flat For best results use a dynamic cardioid microphone Ce TAREE 10 09999999005 2008299009 O25 18 13 15 23 O 24 22 Neutrik Combo connector allows connection of either a 1 4 jack or an XLR jack This is ideal for connecting an XLR gooseneck directly into the mixer CROSS
14. fective component part of the mixer To obtain service under this Limited Warranty purchaser must first contact NUMARK and obtain a return authorization number Purchaser must then return the mixer to NUMARK an adequate conta showing the date of purchase the serial number of the product and the seller s iner for shipping accompanied by purchaser s sales receipt or comparable proof of sale name and address To obtain an RA and assistance on where to return the mixer contact NUMARK customer service at 401 295 9000 Upon receipt NUMARK will repair or replace the defective products NUMARK may at NUMARK S sole discretion use rebuilt reconditioned or new parts or components when repairing any product or replac for a period equal to the remainder of the original Limited Warranty on the origina equipment become the property of NUMARK If NUMARK determines that any m charges for the repair or return of such mixer product with a rebuilt reconditioned or new product Repaired mixers will be warranted mixer or for 90 days whichever is longer All replaced parts components boards and ixer is not covered by this Limited Warranty purchaser must pay all parts shipping and labor 4 Whatare the limits on NUMARK S liabilities THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK MIXERS INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURP
15. off the EQ control and avoid accidental usage IEC Power Connector to plug in your power cord Voltage Selector to set to your country s standard The Leader DJ Technology 1999 Numark Industries 10 http Awww numark com SPECIFICATIONS INPUTS Line 10kQ input impedance 85mV rms sensitivity for 1 22V output Mic 10kQ input impedance unbalanced 2 mV rms sensitivity for 1 22V output 60mV rms max input Phono 47kQ input impedance 1 5mV rms sensitivity 1 KHz for 1 22V output OUTPUTS Line 9V rms max Headphone Amp 0 5 watt into 47Q Distortion less than 0 01 SIGNAL TO NOISE RATIOS vs maximum output Line Better than 96 dB Mic Better than 78 dB Phono Better than 87 dB JIS weighted FREQUENCY RESPONSE Line 20 Hz 22k Hz 0 5 dB Line 20 Hz 20k Hz 0 5 dB Phono 1 dB except for controlled attenuation of 3 dB 20 Hz to reduce rumble and feedback EQUALIZER 12dB 63 250 1K 5K 17KHz POWER CONSUMPTION 10 Watt typical 17 watt with full headphone output DIMENSIONS 480mm W x 175mm H x 95mm D 19 W x 7 H x 4 WEIGHT 3 2 kgs 8 7 165 The Leader DJ Technology 1999 Numark Industries 11 CM100 http www numark com Numark Professional Dis c Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long 1 NUMARK INDUSTRIES LCC NUMARK warrants to the original purchaser that NUMARK S DJ mixers and
16. our system For optimum performance The crossfader is a user replaceable item and subject to wear Excessive force can wear out the fader quickly This is not a warranted item Never use spray cleaners on the slide controls Residues cause excessive dirt build up and this will void your warranty In normal use slide controls can last for many years If they malfunction usually because of a dirty or dusty environment consult a professional technician Always make sure that AC power is OFF while making any connections Use appropriate cables throughout your system Do not use excessively long cables i e over 50 14 Be sure plugs and jacks are tightly mated Loose connections can cause hum noise or intermittents that could easily damage your speakers Make the input and output connections with readily available low capacitance stereo cables Quality cable makes a big difference in audio fidelity and punch See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get Never attempt to make any adjustments or repairs other than those described in this manual Take the unit to your dealer or to authorized Numark Service Center ALWAYS remember TURN AMPS ON LAST AND OFF FIRST Begin with master faders or volume controls on minimum and the amplifier gain input control s down Wait 8 to 10 seconds before turning up the volume This prevents transients which may cause severe
17. pact mobile systems this EQ can be used to tailor the sound to the acoustical requirements of the room Center frequencies are 63Hz 250Hz 1kHz 4kHz and 16kHz Faders have a center detent for an accurate flat response Below is a typical house EQ curve Notice how the knobs above 0 balance out the knobs below Start with this setting if you ve never used a graphic EQ before Below is example of a poor EQ curve because it cuts the output volume down by 6 12dB You have to compensate by running the Master output higher Below is the worst sort of curve to use because you are using EQ to add volume With exaggerated boost you can easily run your power amplifiers into clipping and damage your speakers GENERAL HINTS Boost the 63Hz band for deep bass tones and solid kick drum sound Use sparingly because this dramatically increases demand on power amplifiers and could drive them into clipping Cut slightly at 250Hz and more at 1kHz for extra clarity Note Cutting is preferable to boosting Boost 16kHz for a little sizzle As a general rule less equalization is better 13 EQ 6 12dB adjust sets the amount of adjustment you can make with the equalizer 14 15 16 17 18 19 20 21 22 23 24 25 26 CM100 OUTPUTS Master Fader to control the overall output level Stereo Mono toggle adjusts the Master output
18. se this connection when using turntables your turntable cable should have a grounding wire Line Phono Input switch to allow line level equipment to be plugged into your phono inputs giving you a total of 8 line input options Line Inputs are unbalanced RCA jacks for connecting stereo audio from line level sources such as CD players HiFi VCRs cassette and reel to reel tape decks DAT machines laser discs tuners even synthesizers or other mixing consoles NOTE Plug mono audio sources into both Left and Right inputs using a cable connector Mic Input for your 1 4 Microphone plug 32 33 34 35 36 37 38 39 40 OOOO0O00000000 Q 35 34 33 32 30 27 Cue Send Output to temporarily send channel PFL signal to an external sampler or other source such as both monitor Your PFL cue buttons selects the source Record Outputs are unbalanced RCA jacks used to send the output of the program to any connected recording device Stereo Zone Outputs are unbalanced RCA jacks controlled by the Booth Zone Level control Stereo Main Outputs are unbalanced RCA connectors controlled by the Master fader Stereo Balanced Main Outputs are low impedance XLR type connectors controlled by the Master fader Fader Start Connector to attach your mixer to a remote start equipped Numark CD player using industry standard 1 8 3 5mm cables Equalizer Deactivation Switch to turn
19. speaker damage Use restraint when operating controls Try to move them slowly Rapid adjustments could damage speakers due to amplifier clipping Avoid amplifier clipping at all costs this occurs when the red LEDs usually on the front panel of most professional power amplifiers start flashing Clipping is when the power amplifier is distorting and working beyond it s limits Amplifier distortion is THE major cause of speaker failure prevent fire or shock hazard do not expose the unit to rain or moisture Never place cans of beer soda glasses of water or anything wet on top of the unit Product Registration Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit Retain this information and your original purchase receipt for your records Please return the enclosed warranty card to register your unit with us MODEL PURCHASED FROM SERIAL NUMBER DATE OF PURCHASE Numark The Leader DJ Technology 1999 Numark Industries 3 http Awww numark com CM100 Numark CM100 PROFESSIONAL DJ MIXER CONGRATULATIONS You have purchased the CM100 Stereo Mixer Numark This mixer has been designed to provide dependable control over your input and output sources Whether you install this piece in a permanent environment or take it on the road you are sure to utilize the features of the CM100 Th
Download Pdf Manuals
Related Search