Numark Industries CD MIX-1 User's Manual
Contents
1. NE Press the BPM button to select the BPM feature on the display You will see the BPM number appear in the display The more on the side of the CD player that you wish to set Tap the times you tap the more accurate your number will be When Counter button to the beat of the music you adjust the pitch slider the display number will change by an equal percentage BEAT MATCHING USING PITCH BEND If you find the BPM s Beats Per Minute or Tempos are the same however the drum beats are not matched you will need to temporarily change the pitch The illustration below shows how to match the beat of PLAYER 2 to the beat of the music being played on PLAYER 1 This procedure can be done on either PLAYER After matching the BPM s adjust the pitch temporarily as follows When PLAYER 2 is rotate the jog wheel counter clockwise When PLAYER 2 is behind rotate the jog wheel clockwise The pitch changes automatically while the jog wheel is rotated The faster you rotate the wheel the more you change Releasing the wheel results in a return to the original pitch So the BPM s are once again the same Numark The Leader in DJ Technology 1999 Numark Industries 12 http www numark com EXAMPLE OF MIXING USING BOTH PLAYERS OF YOUR CD PLAYER While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to f2. to match the other player The jog wheel will temporarily bend the pitch of the music if the song is already playing by rotating the wheel clockwise to speed up or counterclockwise to slow down By changing the pitch of one disc with respect to the pitch of the other disc the beats can be matched CUE Pressing the CUE button during play provides a return to the position at which play was started If PAUSE is used before CUE that will become the cue point Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times The CUE LED will light up from the time the CUE button is pressed until the CD has been reset to the position at which play was started Steady lighting of this LED indicates the ready condition START PAUSE Play Pause Button Each press of the Play Pause Button causes the operation to change from play to pause or from pause to play BPM PITCH BUTTON Switches the mode of the display between showing the BPM and the percentage change in pitch TAP BUTTON Tap this button with the beat of the music to determine the current Beats Per Minute BPM Numark The Leader in DJ Technology 1999 Numark Industries Te http www numark com CD MIX 1 LCD DISPLAY FEATURES 7 8 9 TRACK ELAPSED 77 HH 88 PLAY
3. Active while the unit is actually playing a CD PAUSE Active when the unit is paused CUE Flashing when the unit is setting a cue point Lit continuously when the unit is paused at a cue point PROGRAM Used for pre programming the track order to automatically be played by the unit This is a great function if you need to leave the CD player alone TIME MODE Elapsed is for showing time as it is taking place Remain shows how much time is left on a particular track This function is controlled by the TIME BUTTON SINGLE Shows when the unit is set to play just one track at a time When this is not lit the CD will play continuously through all tracks This function is controlled by the SING CONT BUTTON PITCH Is lit when the PITCH BUTTON is active TIME BAR Shows either time remaining or elapsed depending on the setting of the TIME BUTTON PITCH BPM Shows the percentage change in pitch or current BPM 10 TRACK Shows the current track that the unit is playing 11 MINUTES Shows the minutes elapsed or remaining depending on mode setting 12 SECONDS Shows the seconds elapsed or remaining depending on mode setting 13 FRAMES The CD Player breaks down a second into 75 frames for accurate cueing This shows the frames elapsed or remaining depending on mode setting Numark The Leader in DJ Technology 1999 Numark Industries 8 http www numark com CD MIX 1 MIXER FEATURES er Ai 9 10 1
4. MIXER gt PITCH 0 CR With a matching downbeat from Player 1 press the play button If you are beat mixing turn on your Pitch adjust and follow the directions for beat matching Numark The Leader in DJ Technology 13 When you are happy with your mix the crossfader accordingly http www numark com CD MIX 1 BEFORE SWITCHING OFF THE POWER When you have finished using the CD player be sure that the disc tray is closed with the OPEN CLOSE button before switching off the power TROUBLESHOOTING DO NOT switch off the power when the disc holder is open Symptom Possible Cause Corrective Action The power fails to switch on when the POWER switch is set to on Poor power plug connection at the AC outlet or IEC Power cord loose from rear of unit Insert the power plug firmly into the AC outlet and make sure connection is good in unit rear Disc play does not start The disc is loaded upside down The disc is too dirty Reload the disc with the label side up Clean the disc No sound Improper output cable Connect the output cables connections correctly Improper amplifier operation Check amplifier setup Sound skips The CD player is still subject to Change the installation location vibrations or physical shock The disc is too dirty Clean the disc Programmed disc play w
5. 11 5 dB 10KHz NOTE OdBV 1Vrms OdBm 0 775Vrms GENERAL Power Requirements DC 12V 2 5A Dimensions 17 1 2 W x 10 D x 6 3 16 H 445mm W x 255mm D x 157mm H Weight 11 5lbs 5 2Kgs Numark The Leader in DJ Technology 1999 Numark Industries 15 http www numark com Numark Professional Disc Jockey Products LIMITED PRODUCT WARRANTY 1 Whatis covered and for how long NUMARK INDUSTRIES LCC NUMARK warrants to the original purchaser that NUMARK S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for 2 Years The warranty is extended to 3 Years with the completion of the warranty card provided that the warranty card is completed and returned within 30 days from the date of purchase All other NUMARK products are warranted for 1 Year including but not limited to CD players CD Mix Stations turntables preamplifiers beatkeepers equalizers microphones headphones and all other accessories 2 Whatis not covered This Limited Warranty is conditioned upon proper use of the product by the purchaser 3 This Limited Warranty does not cover a defects or damage resulting from accident misuse abuse neglect unusual physical or electrical stress modification of any part of the product or cosmetic damage b equipment t
6. This button is for quickly advancing to higher tracks on a CD 7 PROGRAM Depress this button and the unit will stop and the program indicator will light Select each track to be programmed and press the PROGRAM button between selections You can program up to 30 tracks Press PLAY to start the program To exit and erase program either hold the program button down for more than 2 seconds while the unit is stopped open the disc tray or turn off the power PITCH Pitch Button Activates the Pitch Slider 9 PITCH SLIDER The pitch can be changed up to 12 by pressing the PITCH button so the PITCH 13 LED is lit then moving the sliding fader The pitch will not be changed if the PITCH LED is off SEARCH WHEEL OUTER RING 3 forward and 3 reverse speed positions for searching through songs The more you turn the wheel in either direction the faster you search through the music PITCH BEND JOG WHEEL INNER RING The jog wheel serves 2 functions depending on the current mode a The jog wheel will control a slow frame search when the CD is not playing To set a new frame cue point spin the wheel then press play when you have determined the proper position Press CUE to return to the CUE POINT b When both CD players are playing a CD the pitch bend function allows the positioning of the bass beats to be matched after the pitch of each disc is matched Either player can catch up or fall back
7. connect either 1 8 or 1 4 plugs for audio monitoring with headphones 1 99 o ec fe gt 10 Numark The Leader in DJ Technology 1999 Numark Industries 9 http www numark com CD MIX 1 REAR PANEL FEATURES 1 Channels Inputs Unbalanced RCA jacks for connecting external sources The Phono Line Input is selected with the toggle switch on the front panel You can connect stereo audio from Turntables HiFi VCRs cassette and reel to reel tape decks DAT machines CD players laser discs tuners even synthesizers or other mixing consoles NOTE Plug mono audio sources into both Left and Right inputs using a Y cable connector 2 GND Grounding lug for turntable connection Always use this connection when using turntables your turntable cable should have a grounding wire 3 Line Phono Input switch Use this to allow either line level or phono level equipment to be plugged into your channel inputs When Phono input is selected your signal is fed directly to the high quality RIAA phono pre amplifiers Use this position only for turntables Line level sources will overload the sensitive phono pre amps and will sound very bad so always be sure to toggle the line phono switch over to line before connection of line sources 4 Record Outputs Unbalanced RCA jacks used to send the output of the program any connected recording device 5 Stereo Main Out
8. do so may inadequately protect the equipment in transit and therefore jeopardize the customer s warranty Numark will not accept COD shipments and no call tags will be issued for merchandise return Numark will not return repaired merchandise to customers by priority service unless by written request at the customer s cost Requests must be submitted in writing with merchandise retumed g The defective Numark equipment should be sent FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and original sales receipt enclosed to TZ Numark INDUSTRIES Attention Service Department Phone 1 401 295 9000 11 Helmsman Avenue Fax 1 401 295 5200 North Kingstown RI 02852 USA Web www numark com
9. should be unplugged from the outlet when left unused for long periods of time 13 Damage Requiring Service Only qualified personnel should service this product If you have any questions about service please contact Numark at the number s shown on the back cover of this manual 14 Grounding or Polarization Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated 15 Internal External Voltage Selectors Internal or external voltage selector switches if any should only be reset and re equipped with a proper plug for alternative voltage by a qualified service technician Do not attempt to alter this yourself Numark The Leader in DJ Technology 1999 Numark Industries http www numark com WARNING To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture Electrical equipment should NEVER be kept or stored in damp environments DANGER INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED AVOID DIRECT EXPOSURE TO BEAM CAUTION This product utilizes a laser Use of controls or adjustments other than those specified herein may result in hazardous radiation exposure SERVICE INSTRUCTIONS Disconnect power cord before servicing Replace critical components only with factory parts or recommended equivalents For AC line powered units Before returning repaired unit to user use an ohmme
10. 1 12 13 G O noun e ce e ee e N e Input fader Controls individual source levels in the mix Input toggle switch Selects which source will be live to that channel based on what you have connected to the rear panel input section Replaceable Crossfader Achieves clean segues between the two input channels Hard left selects Channel 1 Hard right selects Channel 2 With the crossfader centered both assigned channels are live Use the crossfader for fast and seamless segues from one selected channel to the other Note The crossfader is user replaceable in case of failure Simply unscrew the two large screws which hold it in place lift it out and disconnect it s cable Re attach the new crossfader and screw the mounting plate back onto the unit you re back in business Fader Start Activation allows you to start the CD players from you crossfader Travel from left to right will start the right CD player and pause the left CD player Mic Input Fader Adjusts microphone level Mic On Off Toggle Activates microphone Master Fader Controls the overall output level Stereo Mono toggle Changes the Master output between Mono and Stereo Stereo EQ Adjust final master output equalization of treble middle and bass LED METER Indicates the Master output level Channel Cue Selector Used to route channel audio to your headphones Headphone Level Adjusts cue volume Headphone Jacks Used to
11. N When the inner search dial is turned A Press the while a cue point is set a new cue P CUE button point can be located The CD player will repeatedly play small parts of the CD as you move it to the desired position By pressing PLAY PAUSE then CUE you can confirm that this CUE POINT new cue point is desirable Position on the disc Back cue operation Numark The Leader in DJ Technology 1999 Numark Industries 11 http www numark com CD MIX 1 MATCHING THE BEATS PER MINUTE BPM Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch When the tempo of the music of the selected CD player is slow compared to the tempo of the other player move the slider to the side and match the tempo When faster move the pitch slider to the side The following illustration shows the case of matching the pitch of PLAYER 2 to the pitch of the music being played on PLAYER 1 Press PLAY PAUSE to start PLAYER 1 Press PLAY PAUSE to start PLAYER 2 PLAYER 1 is playing Both CD players are playing discs Listen to PLAYER 2 in your headphones When PLAYER 2 is slow When PLAYER 2 is fast compared to PLAYER 1 compared to PLAYER 1 speed up PLAYER 2 slow down PLAYER 2 12 iine 125 USING THE BPM DISPLAY FEATURE gt Il Ge Cros fone frre ol BPN OG BE BB BH rae
12. Numark Professional Disc Jockey Products CD MIX 1 PROFESSIONAL CD MIXING CONSOLE OPERATING MANUAL 1999 Numark industries http www numark com CD MIX 1 Safety Information and Product Registration CAUTION LAN Por keee sea AN DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the produc s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying this appliance CAUTION FOR USA amp CANADIAN MODELS ONLY TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE SAFETY INSTRUCTIONS 1 Read Instructions All the safety and operating instructions should be read before this product is connected and used 2 Retain Instructions The safety and operating instructions should be kept for future reference 3 Heed Warnings All warnings on this product and in these operati
13. USA use NEMA style 220 volt plug For other countries use proper plug for local outlet Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit Retain this information and your original purchase receipt for your records Please return the enclosed warranty card to register your CD player with us MODEL SERIAL NUMBER PURCHASED FROM DATE OF PURCHASE Numark The Leader in DJ Technology 91999 Numark Industries 3 http www numark com CD MIX 1 Numark CD MIX 1 PROFESSIONAL CD MIXING CONSOLE CONGRATULATIONS You have just purchased a combination dual CD player and mixer designed specifically for the professional DJ This unit has been designed to provide portable CD mixing with the same ease and creativity that you have enjoyed with records Please take a few moments to familiarize yourself with the CD MIX 1 by reading the following information before attempting to operate the unit Once again congratulations and thank you for choosing the CD MIX 1 FEATURES CD Section Mixer Section e 2 independent CD units e External input for 2 Phono or 2 Line inputs e Mechanical Anti Shock e Master balanced unbalanced and record e Ability to play 3 and 5 CDs output e Plays CD and CDR recordable CDs e Direct input for onboard CD units e Pitch Jog Wheel for both setting cue points e Input for External Microphone with and ad
14. WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS 6 This Limited Warranty allocates risk of product failure between purchaser and NUMARK and NUMARK S product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty The agents employees distributors and dealers of NUMARK are not authorized to make modifications to this Limited Warranty or make additional warranties binding on NUMARK Accordingly additional statements such as dealer advertising or presentation whether oral or written do not constitute warranties by NUMARK and should not be relied upon 7 How does state law apply to this warranty SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER 8 This Limited Warranty gives you specific legal rights You may also have other rights which vary from one jurisdiction to another RETURN INFORMATION a ARetur Authorization number must be obtained from Numark through the address or phone numbers below b A copy of the original sales receipt must also be included for the equipment to be repaired under warranty c The faulty equipment must be packed in its original packaging d One additional outer layer of packaging must be included to ensure product safety Failure to
15. ade from PLAYER 1 to PLAYER 2 Load a disc in PLAYER 1 and select the track and press PLAY Load a disc in PLAYER 2 and select the track then play Set and edit a start cue point on PLAYER 2 Check you new cue point Do a MIX 1999 Numark Industries CD MIX 1 PLAYER 1 PLAYER 1 PLAYER 1 AE Load a disc and press the OPEN CLOSE button PLAYER 2 Ree 2 TRACK SR LA A Select the track to be Press the PLAY button played PLAYER 2 PLAYER 2 TRACK gt A SR Load a disc and press the OPEN CLOSE button Select the track to be played Press the PLAY button PLAYER 2 PLAYER 2 PLAYER 2 LA A Press the Pause button of PLAYER 2 Rapidly search for a cue point using the outer wheel Slowly set the right cue point using the inner wheel PLAYER 2 PLAYER 2 PLAYER 2 gt A D Listen with the monitor and press the play button Press the cue button then play to be sure of the set cue point Reset the player to the Cue point by pressing Cue PLAYER 2 PLAYER 2
16. e property of NUMARK IfNUMARK determines that any mixer is not covered by this Limited Warranty purchaser must pay all parts shipping and labor charges for the repair or return of such mixer 5 Whatare the limits on NUMARK S liabilities THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK MIXERS INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL INCIDENTAL CONSEQUENTIAL INDIRECT OR SIMILAR DAMAGES LOSS OF PROFITS DAMAGES TO PURCHASER S PROPERTY OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE MISUSE OR INABILITY TO USE ANY NUMARK MIXER BREACH OF WARRANTY OR NEGLIGENCE INCLUDING BUT NOT LIMITED TO NUMARK S OWN NEGLIGENCE EVEN IF NUMARK OR ITS AGENT HAS BEEN ADVISED OF SUCH DAMAGES OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK S MIXERS AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER S EXCLUSIVE REMEDY IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED
17. entire manual before connecting this unit to your system For optimum performance a Never use spray cleaners on the slide controls Residues cause excessive dirt build up and this will void your warranty In normal use slide controls can last for many years If they malfunction usually because of a dirty or dusty environment consult a professional technician b Always make sure that AC power is OFF while making any connections c Use appropriate cables throughout your system Do not use excessively long cables i e over 50ft 14m Be sure plugs and jacks are tightly mated Loose connections can cause hum noise or intermittents that could easily damage your speakers Make the input and output connections with readily available low capacitance stereo cables Quality cable makes a big difference in audio fidelity and punch See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get d Never attempt to make any adjustments or repairs other than those described in this manual Take the unit to your dealer or to an authorized Numark Service Center e ALWAYS remember TURN AMPS ON LAST AND OFF FIRST Begin with master faders or volume controls on minimum and the amplifier gain input control s down Wait 8 to 10 seconds before turning up the volume This prevents transients which may cause severe speaker damage f Use restraint when operating controls Try to move them slowly Rapid adjus
18. hat has the serial number removed or made illegible c all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use d defects or damage from improper testing operation maintenance installation adjustment or service of the mixers e crossfaders 4 Whatare NUMARK S obligations During the applicable warranty period NUMARK will repair or replace at NUMARK S sole discretion without charge to the purchaser any defective component part of the mixer To obtain service under this Limited Warranty purchaser must first contact NUMARK and obtain a return authorization number RA Purchaser must then return the mixer to NUMARK in an adequate container for shipping accompanied by purchaser s sales receipt or comparable proof of sale showing the date of purchase the serial number of the product and the seller s name and address To obtain an RA and assistance on where to return the mixer contact NUMARK customer service at 401 295 9000 Upon receipt NUMARK will repair or replace the defective products NUMARK may at NUMARK S sole discretion use rebuilt reconditioned or new parts or components when repairing any product or replace a product with a rebuilt reconditioned or new product Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for 90 days whichever is longer All replaced parts components boards and equipment become th
19. ill not function The CD player is in normal disk play mode Hold down the Program button for 3 seconds then program the tracks Hum Loose cable connections Firmly connect all audio plugs Numark The Leader in DJ Technology 1999 Numark Industries 14 http www numark com CD MIX 1 TECHNICAL SPECIFICATIONS CD Players Pa FREQUENCY RESPONSE Quantization 16 bit linear channel CD 20 20KHz 1 2dB 3 beam laser LINE 20 20KHz 1 1 5dB Oversampling rate 8 times PHONO 20 20KHz 2 2 5dB RIAA Ghost acceso time MIC 33 15KHz 1 3dB oo next track less than 1 7sec SN RATIO IEC A WEIGHTED ong access time CD LINE MORE THAN 85dB Track 1 gt Track 20 less than 3sec PHONO MORE THAN 75dB Start Time less than 0 3 sec MIC MORE THAN 70dB Pitch control range 12 Pitch bend 16 TOTAL HARMONIC DISTORTION CD LINE LESS THAN 0 05 20KHz LPF PHONO LESS THAN 0 12 OVERALL MIC LESS THAN 0 1296 PHONES 32 OHM LESS THAN 0 25 INPUT LEVEL IMPEDANCE LINE 11dBV 280mV 47K OHM CROSSTALK PHONO edb SMV 47K OHM CD MORE THAN 60 dB AT 1KHz MIC 62dBV 0 8mV 3K OHM LINE PHONO MORE THAN 55 dB AT 1KHz OUTPUT LEVEL IMPEDANCE ITEM OdBV OUTPUT NON CLIP MAX EQUALIZER REC OUT RCA 15 5dBV 170mV 1K OHM 5V LOW 12 dB 100Hz MASTER OUT RCA OdBV 1V 1K OHM 14dBV 5V MASTER OUT XLR 3 7dBm 1 2V 470 OHM 14dBV 5V MID 12 dB 1KHz PHONES 32OHM 18dBV 0 13V 33 OHM 1V 30mW HI
20. justing tempo independent gain control e 3 search speeds e Crossfader to blend between 2 Channels e Large back lit LCD Display and control Auto start of the CD units e Track sequence programming Three band Equalizer for master output e Time button with elapse and remain time Dual Band 12 segment LED output display bar Fader CD Start button e Single Continuous modes Headphone output for 1 4 and 1 8 style e Pitch percentage display plugs with the ability to cue any channel e 12 pitch adjustment e 12VDC power input to allow car battery e Auto dead space elimination usage e Ability to autostart player with use of the crossfader e BPM COUNTER Numark The Leader in DJ Technology 1999 Numark Industries 4 http www numark com CD MIX 1 TABLE OF CONTENTS Safety and Registration 2 Introduction 4 Set up Instructions amp Connections 7 Important Information 6 Description of the Features CD Player 7 Display 8 Mixer 9 Rear Panel 10 Basic Operation Play Pause and Cue Operations 11 Matching the Tempo 12 Beat Matching Using Pitch Bend 12 Example of Mixing 13 Before Switching off the Power 14 Troubleshooting Guide 14 Information and Specifications 15 Warranty 16 Numark The Leader in DJ Technology 1999 Numark Industries 5 http www numark com CD MIX 1 IMPORTANT INFORMATION CHECK TO BE SURE THE FOLLOWING ITEMS ARE IN THIS BOX 1 CD MIX 1 1 OWNERS MANUAL THIS BOOKLET 1 POWER ADAPTER Please read this
21. ng instructions should be followed 4 Follow Instructions All operating and other instructions should be followed 5 Water and Moisture This product should be kept away from ET direct contact with liquids 6 Heat Avoid placing this product to close to any high heat sources such as radiators 7 Ventilation The appliance should be situated so that it s location or position does not interfere with it s proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation opening or placed in a built installation such as bookcase or cabinet that may impede the flow of air through the ventilation openings 8 Power Sources This product should be connected to a power supply only of the type described in these operating instructions or as marked on the unit 9 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord 10 Object and Liquid Entry Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer 11 Cleaning The appliance should be cleaned only as recommended by the manufacturer 12 Non use Periods The power cord of the appliance
22. puts Unbalanced RCA connectors controlled by the Master fader 6 Balanced Main Outputs Low impedance XLR type connectors controlled by the Master fader 7 Mic Input Plug your 1 4 Microphone plug in here 8 Power Connector Plug in power adapter here and check the voltage level to match your country s standard 9 Power Switch Turn on unit here Numark The Leader in DJ Technology 1999 Numark Industries 10 http www numark com CD MIX 1 DESCRIPTION OF THE PLAY PAUSE AND CUE OPERATIONS Press the Press the PLAY and CUE PLAY PAUSE button CUE button Position on the disc Play interval Back cue operation Pressing the PLAY PAUSE button starts the disc Pressing the CUE button will reset the disc to the last place where the disc was started This is called the cue point By alternately pressing the PLAY PAUSE button and the CUE button the disc may be returned and played from the cue point any number of times This function is called back cue PLAY PAUSE and CUE Press the Press the Press the PLAY PAUSE button PLAY PAUSE button CUE button Position on the disc ll gt il Play interv When play has been paused and then started again the return position for the back cue will be updated to this new position gt Play interval Back cue operation EDITING CUE POINT i AU
23. ter to measure from both AC plug blades to all exposed metallic parts The resistance should be no more than 100 0000hms CD MIX 1 NOTICE CONCERNING FCC REGULATIONS This equipment generates and uses radio frequency energy and may cause interference to radio and television reception if you do not operate it in strict accordance with the procedures detailed in this OPERATING MANUAL This unit complies with Class B computing device rules in accordance with the specifications in Sub part J or Part 15 of the FCC Rules which are designed to provide reasonable protection against such interference in a residential installation There is no guarantee however that interference will not occur in a particular installation If the unit does cause interference to any radio or television reception try to reduce it by one or more of the following means a Reposition the other unit and or its antennae b Move this unit c Move this unit and the other unit s further apart d Plug this unit into a different AC outlet so that it is on a different circuit from the other equipment This note is in accordance with Section 15 838 of the FCC Rules This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications DOUBLE INSULATED When servicing use only identical replacement parts For 220 volt use in
24. tments could damage speakers due to amplifier clipping Avoid amplifier clipping at all costs this occurs when the red LEDs usually on the front panel of most professional power amplifiers start flashing Clipping is when the power amplifier is distorting and working beyond it s limits Amplifier distortion is THE major cause of speaker failure e my To prevent fire or shock hazard do not expose the unit to rain or moisture Never place cans of beer soda glasses of water or anything wet on top of the unit Numark The Leader in DJ Technology 1999 Numark Industries 6 http www numark com CD MIX 1 DESCRIPTION CD MIX 1 CD PLAYER FEATURES 1 OPEN CLOSE Disc Tray Open Close Press to load or eject the disc Each press will open or close the disc tray on the transport NOTE Tray will not open unless the disc has been paused Tray will automatically close after 30 seconds 2 TIME Time Button Switches the time display between elapsed playing time and remaining time on the track and remaining time on the entire CD 3 CONT SING Will cause just a single track to play or all tracks in order by pressing once or twice 4 LCD DISPLAY Indicates all the functions as they are occurring with the CD These functions are explained in the next section 5 TRACK Track Buttons Used to select the track to be played 6 Track 10 Button
Download Pdf Manuals
Related Search