Home

Nokia 610 User's Manual

1.
2. 70 Traffic safety wicc son pects deminer ees 70 Operating environment 70 Electronic devices aaa 70 Pacemaker ws mag o 2d Namaa naaa naluha 70 Potentially explosive atmospheres 70 Vehicles Kaban NAKU anei ninoi NENG 71 Emergency calls aaa 71 To make an emergency call 71 keka asaan DAANG SANGA LG 72 IOSENY kapakanan aaa NEA F3 4 Copyright 2004 Nokia All rights reserved For your safety Read these simple guidelines Breaking the rules may be dangerous or illegal Further detailed information is given in this user s guide gt gt gt OFF MODE If wireless phone use is prohibited or when it may cause interference or danger switch your car kit phone over to off mode To do so with ignition on press and hold Also remember to switch your mobile phone off if necessary ROAD SAFETY COMES FIRST Remember that the safety of operating a motor vehicle in traffic requires the full attention of all motorists Only use your car kit phone if traffic conditions permit safe use and check if local laws regulations restrict the use of mobile phones while driving INTERFERENCE All wireless phones may get interference which could affect performance OFF MODE WHEN REFUELLING Switch your car kit phone over to off mode at a refuelling point Don t use near fuel or chemicals Also remember to switch your mobile phone off if necessary HS SG N o Nn
3. When installing the radio unit make sure to mount the bra cket in such a way that the unit slides into place towards the front of the car or is mounted sideways Otherwise the unit may break loose if you have an accident and cause in jury or damage T y Pa E Be h pa KSI FW PN maa Ya ra i g a i YW 7 How to mount the radio unit in the car 66 Copyright 2004 Nokia All rights reserved Display SU 11 Pos 2 The mount for the display unit is to be fixed to the dashboard or to any other location in the cockpit area where the display is clearly visible for the user but does not impair control or operation of the vehicle Your service technician may be able to provide you with information on alternatives for mounting the display unit suitably in your vehicle without requiring boreholes You will find further information on suitable mounting locations at the Nokia website http www nokia com Remember that all equipment must be mounted so that it does not interfere with the operation of the vehicle How to mount the display Input device CUW 3 Pos 3 The input device comes with a mount that is to be fixed in a suitable location where it is easily accessible for the user However take particular care to ensure that the input device will not interfere with the driver s operation of the vehicle Make sure that the cable will reach to the radio unit for connection The best location to mount the input
4. To make these settings with the display in standby gt Press V0 gt Scroll with to the menu item Message settings and press MA to select it gt Scroll with to the desired option and press 29 to select it gt Follow the instructions on the display View templates Your car kit phone can save up to 10 templates to be sent as short messages Five standard templates come with your car kit phone you may save 5 further templates taken from short messages sent to you The following options are available Send The template selected will be sent Erase Use this option to erase any templates that you have taken from short messages sent to you and then saved To view the list of text message templates with the display in standby gt Press gt gt Scroll with A to the Messages menu and press A to view the options gt Scroll with to View templates and press 2 to view the list gt Scroll with A through the list of templates and press EP to select the desired template gt Press 2 to confirm the selection gt Scroll with A to the desired option and press 93 to select it gt Follow the instructions shown on the display While you may erase the templates you have saved from short messages sent to you please note that you cannot delete the 5 standard templates stored in the car kit phone memory Call register Call register F a The phone registers the phone numbers l a Call regi
5. to delete text numbers or other entries to return to the standby display Copyright 2004 Nokia All rights reserved 17 Basic components of the CUW 3 input device N Press toenda call to delete a character or number entered to return to the previous menu item or display Navi wheel Turn the Navi wheel to adjust the volume of the ringing tone of an incoming call or the loudspeaker volume during an ongoing call You can also use the Navi wheel to scroll within a menu In the standby display turn the Navi wheel to the left to activate input of a phone number If you are in the voice display turning the Navi wheel to the left will scroll through the voice commands and allow you for example to select one to be replayed In the standby display turn the Navi wheel to the right to search for a contact entry in alphabetical order If you are in the voice display turning the Navi wheel to the right will scroll through the voice tags you have trained for voice dialling a number and allow you for example to select one to be replayed Press the Navi wheel to access a function in a particular context to start the menu and select an item to select an item from a list to start options and select an item 18 Copyright 2004 Nokia All rights reserved zi This key activates the following functions from the standby display gt Press to switch off the ringing tone An incoming call is indicated by
6. compatible mobile phone should not be within range for a Bluetooth wireless connection for example you can use the car SIM card inserted in the radio unit to temporarily access your standard user profile If you switch off the ignition and switch it on again the car kit phone will automatically Copyright 2004 Nokia All rights reserved 21 Switching on off and off mode begin to search for the remote SIM card of the compatible mobile phone e Assign SIM card Either a remote SIM card or the car SIM card can be assig ned to the active user profile Car SIM card assigned to active user profile If you have assigned a car SIM card i e the SIM card inserted in the radio unit to the active user profile in the car kit phone and the message SIM rejected appears on the display although a SIM card has been properly inserted into the radio unit contact your network operator or service provider If you are prompted to enter a PIN code enter the PIN code belonging to the car SIM card This will appear on the display as a series of asterisks Press 22 to confirm If the PIN code has been entered correctly the car kit phone logs into the GSM radio network using the car SIM card The car kit phone then asks if you wish to copy the contact entries on the car SIM card to the car kit phone memory if no contact entries have as yet been saved in the car kit phone memory The car kit contact entries represent those in the internal car
7. electronic speed control systems airbag systems Should you note a fault or change in the operation of such a system contact your car dealer The car kit phone may only be used at an operating voltage of 12 V with the minus pole earthed Failure to observe this requirement may result in damage to the car s electronics system Do not operate your car kit phone off the car battery for a longer period of time i e with the engine switched off as this may cause your battery to run dry Safety first e In order to comply with RF exposure requirements for mobile transmitting devices a minimum separation distance of 20 cm must be maintained between the antenna and all persons Mounting Nokia 610 car kit phone Radio unit TFE 4 Pos 1 We recommend that you mount the radio unit TFE 4 at a less visible position in the car interior However ensure that the unit is installed to permit easy access to the SIM card so that it can Copyright 2004 Nokia All rights reserved 65 Mounting be changed if necessary and make sure that the cables for the microphone and loudspeaker will reach the places you intend to mount these components When mounting the radio unit use the bracket which is included in the scope of supply the unit will clip securely onto the bracket if mounted correctly Make sure to mount the radio unit in such a way that a con nection using Bluetooth technology can be established to a compatible device
8. gt Scroll with to Forward and press 22 to select this option gt Scroll with A to the desired transmission technology via Bluetooth or Via text message and press 22 to select it gt Scroll with to the compatible device which you wish to send the message to and press 22 to select it Save and Forward for business card only Select this option to save a received business card in the car kit phone memory and to forward it simultaneously to a compatible mobile device using Bluetooth wireless technology or as a short message For further information see Forward on page 61 Discard Select this option if you do not wish to save a business card or calendar note Copyright 2004 Nokia All rights reserved 61 Data transmission 9 Data transmission GPRS General Packet Radio Service GPRS is a technology that allows the car kit phone to be used for sending and receiving data over the mobile network network service GPRS as such is a data bearer that enables wireless access to data networks such as the Internet Before you can use GPRS technology you will need to subscribe to the GPRS service For details on the availability of and subscription to the GPRS service contact your network operator or service provider For further information see GPRS modem settings network service on page 42 HSCSD High Speed Circuit Switched Data The car kit phone enables you to use GSM high speed data services netw
9. memory gt Press amp to begin copying the entries User data If you use Bluetooth technology functions regularly you can deactivate the option Authorisation request in the compatible mobile phone Then connections between the devices via Bluetooth wireless technology can conveniently be made automatically without separate acceptance or authorisation To do so scroll to the menu item View paired devices and select the option Request authorisation and set it to Off For further information see the user s guide applicable for the compatible mobile phone with Bluetooth technology that you are using Car SIM card gt Press to copy the contacts from the car SIM card inserted in the radio unit to the car kit phone memory Searching for devices that support Bluetooth technology gt Scroll with A to the option Search for Bluetooth devs and press lt to select it if you wish to carry out the download from a device that has not yet been paired with the car kit phone Copyright 2004 Nokia All rights reserved 57 User data Change user You may save two user profiles in your car kit phone to be used as desired The settings for each user profile may be customised to suit the particular needs of the user The currently active profile is shown on the display at all times using two indicators User 1 Fl User 2 gt With the display in standby press 92 to access the menu gt Scroll with to the User data menu
10. mobile phone is moved out of range e g when the user leaves the car or until the user breaks the connection by pressing a button on the compatible mobile phone to change back to standard operation of the mobile or to switch off the phone If desired a separate car SIM card can be inserted in the car kit phone This SIM card can be used when the wireless link to the compatible mobile phone established via Bluetooth technology is interrupted or if the car kit phone is to be operated using a permanent car SIM card 8 Copyright 2004 Nokia All rights reserved If you use Bluetooth technology functions regularly you can deactivate the option Authorisation request in the compatible mobile phone Then connections between the devices via Bluetooth wireless technology can conveniently be made automatically without separate acceptance or authorisation To do so scroll to the menu item View paired devices and select the option Request authorisation and set it to Off For further information see the user s guide applicable for the compatible mobile phone with Bluetooth technology that you are using For information on compatible mobile phones see the Nokia website http www nokia com 2 General information Overview of the car kit phone equipment Your car kit phone is made up of several components which are described below Car kit phone equipment 1 Radio unit TFE 4 The radio unit is an E GSM 900 1800 car telephone
11. or other acts beyond the reasonable control of Nokia including but not limited to deficiencies in consumable parts such as batteries which all by their nature have a limited lifetime and breakage or damage to antennas unless the defect was caused directly by defects in materials design or workmanship ii Nokia or its authorized service company was not notified by the Customer of the defect within thirty 30 days after the appearance of the defect within the warranty period iii the Product was not returned to Nokia or its authorized service company within thirty 30 days after the appearance of the defect within the warranty period iv the Product serial number the accessory date code or the IMEI number has been removed erased defaced altered or is illegible v the defect was caused by a defective function of the cellular network vi the defect was caused by the fact that the Product was used with or connected to an accessory not manufactured and supplied by Nokia or used in other than its intended use vii the defect was caused by the fact that the battery was short circuited or seals of the battery enclosure or cells were broken or show evidence of tampering or the battery was used in equipment other than for which it has been specified or viii the Product software needs to be upgraded due to changes in cellular network parameters 7 To claim this limited warranty the Customer shall present either i
12. s For your safety OFF MODE NEAR BLASTING Switch your car kit phone over to off mode where blasting is in progress Observe restrictions and follow any regulations or rules Also remember to switch your mobile phone off if necessary QUALIFIED INSTALLATION AND SERVICE Only a qualified professional may install or repair phone equipment CONNECTING TO OTHER DEVICES When connecting to any other device using Bluetooth wireless technology read the relevant user s guide for detailed safety instructions Do not connect incompatible products EMERGENCY CALLS Ensure the phone is switched on and in service gt Press and hold until Make an emergency call is shown on the display Confirm by pressing 29 b Confirm the security inquiry Yes by pressing A or cancel by selecting No with 34 and pressing A Give your location Do not end the call until told to do SO CALLING Ensure that the car s ignition is on and that the car kit phone is using either the SIM card from a compatible mobile phone or the car SIM card Select the desired phone number from the contacts or use the Navi wheel to enter the number then press To end a call press N To answer a call press Copyright 2004 Nokia All rights reserved 5 Network services ANTENNA G2 In order to comply with RF exposure requirements for mobile transmitting devices a minimum distance of 20 cm must be maintained between the antenna and all persons KG FUSE
13. REPLACEMENT tii Replace a blown fuse with a fuse of the same type and size Never use a fuse with a higher rating 6 Copyright 2004 Nokia All rights reserved Network services The car kit phone described in this guide is approved for use in the EJGSM 900 and GSM 1800 networks A number of features included in this guide are called Network Services These are special services that you arrange through your wireless service provider Before you can take advantage of any of these Network Services you must subscribe to them through your service provider and obtain instructions for their use from your service provider Select network services such as call diverting from the related menu of the car kit phone The chosen settings will then be automatically transmitted to the network operator for configuration of the service Network service settings are not stored in the car kit phone or on the SIM card I Some networks may not support all language dependent characters and or services About accessories A Warning Use only accessories approved by the phone manufacturer for use with this particular phone model The use of any other types may invalidate any approval or warranty applying to the phone and may be dangerous For availability of approved accessories please check with your dealer 1 Using a remote SIM card with Bluetooth wireless technology The car kit phone supports Bluetooth wireless technology and Bluetooth
14. a flashing display gt Press and hold to put the car kit phone in off mode Press again to return to the standby display gt Press to switch incoming or ongoing calls from your car kit phone over to a compatible paired headset and back as desired To restart the car kit phone press m and hold for longer than 10 seconds Q This key activates the following voice functions from the standby display gt Press to activate voice dialling and voice commands gt Press and hold to activate recording also during ongoing calls 4 Getting started Installing the car SIM card The car kit phone can be used with a separate own car SIM card In this case you will need to insert a SIM card in the radio unit A Caution Keep all miniature SIM cards out of the reach of small children The SIM card and its contacts can easily be damaged by scratches or bending so be careful when handling inserting or removing the card Switch off the car s ignition before inserting the SIM card Gently press the catch on the radio unit casing 1 to open and lift the cover 2 2 Getting started Slide the SIM card holder 3 as shown to unlock it Open the SIM card holder by lifting it upwards on one side as depicted in figure 4 Carefully insert the SIM card into the holder 5 Make sure that the SIM card is inserted properly and that the golden contact area on the card is facing you Push the SIM card holder down i
15. a manual network search Indicates unread text messages If this indicator is flashing the memory is full Indicates a business card is being forwarded This setting is active Headset volume can be adjusted Ringing tone volume can be adjusted Loudspeaker volume can be adjusted Backlighting can be adjusted Indicators for recorder functions EY p Recorder function is on The tape is being played back Indicators for Bluetooth functions ER Device with Bluetooth technology has been paired with the car kit phone aj Bluetooth wireless technology is activated Notification indicators Indicates that an item has been erased Indicates that your entry is incorrect or not permissible O K confirms a setting or selection made Indicates additional information Indicates a warning or a caution Your message is being sent does not indicate that the message has been received Lo om Wo g Fl Basic components of the CUW 3 input device Basic components of the CUW 3 input device The function selectors include four keys and a Navi wheel Depending on the setting selected you may choose from the following options Press and hold the emergency call function is active For further information see To make an emergency call on page 71 Press to accept an incoming call to display the list of the last 10 phone numbers you have called to start dialling a number Press and hold
16. and press 2 to open it gt Scroll with 44 to the option Change to user 1 or Change to user 2 and press 22 to select it gt The user profile selected will be activated You may be prompted to enter the PIN code belonging to the remote SIM card i You may change whether the PIN code of the remote SIM card is to be saved at any time desired by selecting the menu item Assign SIM card For further information see Assign SIM card on page 58 If you should change the PIN code of the remote SIM card in the mobile phone at a later time the wrong PIN code of the remote SIM card will be used the next time you switch on the car kit phone if this option has been activated You will then be prompted by the car kit phone to enter the changed PIN code Please note that you may only repeat this twice before the SIM card will be blocked 58 Copyright 2004 Nokia All rights reserved User settings This feature lets you make the desired settings for the active user profile and the contacts to be downloaded using Bluetooth wireless technology A user profile will be personalised as soon as you have assigned a SIM card to it You may assign either the car SIM card or a remote SIM card as desired gt With the display in standby press 92 to access the menu gt Scroll with to User data and press A to select this item gt Scroll with to Settings for user 1 or Settings for user 2 and press A to select this item The following opt
17. blocked You may first need to turn off these features before you can make an emergency call PIN code request available for car SIM card only Use this option to set the car kit phone to ask for the PIN code of the car SIM card installed in the radio unit whenever the phone is switched on Remember that some providers do not allow the PIN code request function to be deactivated PIN code change available for car SIM card only This option lets you change the PIN code of the car SIM card installed in the radio unit of your car kit phone Remember that these codes may only include the numbers O to 9 For further information see PIN code on page 73 Copyright 2004 Nokia All rights reserved 43 Settings Closed user group This is a network service which specifies the group of people you can call or who can call you For further information contact your network operator or service provider You can choose from three options for this function e Default The settings made by your service provider are active e On The closed user group service is active e Off The closed user group service is deactivated 44 Copyright 2004 Nokia All rights reserved Fixed dialling numbers only available for the car SIM card You can restrict your outgoing calls to selected phone numbers if this function is supported by your car SIM card To save and edit the numbers on this list you need the PIN2 code i If you wish to use this
18. call until given permission to do so Copyright 2004 Nokia All rights reserved 71 Technical data 13 Technical data System cable wiring 1 412V car battery red Battery voltage 2 Ground car battery black 12 6 V DC 10 8 16V DC 3 Car radio mute yellow Negative potential to ground GND 4 Car ignition sense blue 5 2A fuse Current consumption 6 1A fuse 1 5 A maximum off mode 1 mA Transmitting power EGSM 900 3 2 mW 2 W DCS 1800 1 0 mW 1 W System cable PCU 4 72 Copyright 2004 Nokia All rights reserved 14 Glossary Bluetooth SIM Access Profile SIM Access Profile is an international de facto Bluetooth standard which allows wireless access to the remote SIM card of a compatible mobile phone using Bluetooth technology Car SIM card The car SIM card is inserted in the SIM card reader in the Nokia car kit phone DTMF tones You can use DTMF Dual Tone Multi Frequency tones to communicate with voice mailboxes computerised telephony systems etc The tones can be selected by using the Navi wheel number editor to scroll to the numbers 0 9 GPRS GPRS General Packet Radio Service enables wireless data transmission For wireless access to data networks you will need a GPRS access point from your network operator or service provider For further information see GPRS General Packet Radio Service on page 62 GSM GSM the Global System for Mobile Communication is the tec
19. enhancements out of the reach of small children Keep the car kit phone dry Precipitation humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits Do not use or store the car kit phone in dusty dirty areas Its moving parts can be damaged Do not store the car kit phone in hot areas High temperatures can shorten the life of electronic devices damage batteries and warp or melt certain plastics Do not store the car kit phone in cold areas When it warms up to its normal temperature moisture can form inside which may damage electronic circuit boards Do not attempt to open the car kit phone Non expert handling may damage it Do not drop knock or shake the car kit phone Rough handling can break internal circuit boards Do not use harsh chemicals cleaning solvents or strong detergents to clean the car kit phone Do not paint the car kit phone Paint can clog the moving parts and prevent proper operation Care and maintenance e Use only an approved antenna Unauthorised antennas modifications or attachments could damage the car kit phone and may violate regulations governing radio devices All of the above suggestions apply equally to your car kit phone or any enhancement If any of them is not working properly take it to your nearest qualified service facility The personnel there will assist you and if necessary arrange for service Copyright 2004 Nokia All ri
20. phone and establish a wireless connection between the two devices via Bluetooth technology For further information see Bluetooth wireless technology on page 51 In principle a wireless headset with Bluetooth technology can only establish one Bluetooth wireless connection to another compatible device supporting Bluetooth technology Therefore to switch over to a wireless headset with Bluetooth technology you may need to break an existing Bluetooth wireless connection for example to a mobile phone If you have already established a Bluetooth SIM Access Profile wireless connection to a compatible mobile phone and wish to switch over to a compatible wireless headset with Bluetooth technology the additional Bluetooth wireless connection to the headset has to be established from the car kit phone This can be conveniently done using a voice command For further information see Voice commands on page 48 Quick access to the contact entries a A shortcut feature has been provided to make it easier for you to find a desired phone number in the contact entries and make a call H CONTACTF i ABCJEFGHIS Nfa gt To find a particular contact entry with the display in standby scroll with 3 to the first letter of the name as entered in the contacts and press 99 12 Copyright 2004 Nokia All rights reserved gt Scroll with A to the desired name and press 7 to dial the number Before you can use this feature yo
21. request m Change PIN code m Closed user group m Default On a Off m Fixed dialling m On a Off a Number list Equaliser settings Loudspeaker m Radio loudsp Restore factory settings Copyright 2004 Nokia All rights reserved 29 List of menu functions Voice m Voice tags m New voice tag m List of voice tags m Play m Change m Delete m Voice commands m New voice command m List of voice commands m Play m Change m Delete Recorder m Record a Play m Delete Bluetooth Search for audio enhancem View active devices m View paired devices m Create connection m Delete pairing m Request authorisation m Edit Bluetooth name accessory m Bluetooth name car kit phone 30 Copyright 2004 Nokia All rights reserved Allow second connection Visibility User data Download contacts Change to user 1 2 Settings for user 1 2 a Assign SIM card m View active SIM card m Download settings m SIM and phone mem m SIM memory a Phone memory 7 Menu functions Messages You can receive and read short text messages on your car kit phone and either call the sender back or send an answering SMS using a message template network service However before you can send your own short messages you will have to make some necessary Message settings Ca Messages Remember that traffic safety comes first Don t use a hand held phone while driving and only use the features offered by your car kit
22. the loudspeaker not included in the scope of supply Please ask the service technician who is to install your car kit phone for professional assistance e Connection to compatible car radio loudspeakers via the audio line in of your car radio You will need to adjust the audio level suitably if this option is selected To make the desired setting with the display in standby gt Select the Settings menu and press 72 to open it gt Scroll with to the Equaliser settings and press SA to select it gt Scroll with 44 to Loudspeaker or Radioloudsp and press E to select the desired option Settings Restore factory settings You can reset all of the menu settings to the original factory settings With the display in standby gt Select the Settings menu and press 2 to open it gt Scroll with to the Restore factory settings and press EA to select it gt Follow the instructions shown on the display A Caution If you have erased a setting you cannot undo this operation The data is irretrievably lost Copyright 2004 Nokia All rights reserved 45 Voice tags Voice tags H a Before recording voice tags or using C Yoice voice dialling you will need to be aware m of some essential facts e Voice tags are not language dependent They are dependent on the speaker s voice e Voice tags are sensitive to background noise Record them and make calls in a quiet environment e When recording a voi
23. to the desired symbol or phone number gt Press amp to dial the number Plan Redialling To redial a number you have recently dialled you can view a list of up to 10 numbers that you have last called gt With the display in standby press gt Scroll with A to the desired number or name gt Press amp to dial the number Using the Navi M wheel to make a call You can use the Navi wheel to enter a phone number and make a call b With the display in standby scroll with EI to the first number in the phone number and press 22 to select it b Repeat this step for the other numbers making up the desired number until the complete phone number is shown on the display gt Press amp to dial the number Redialling List of favourites This list may contain up to 12 name tags you have assigned to phone numbers For further information see Voice dialling on page 24 It is provided for your convenience to allow you to quickly access numbers you frequently call i You can call the list from the standby display quickly and easily b Press o gt Scroll with 2424 to the desired entry and press 22 to select it gt Follow the instructions shown on the display gt Press to dial the number Copyright 2004 Nokia All rights reserved 25 Call waiting service Call waiting service a If the function Call waiting is activated Er Gl Forsley David 39 You will be notified of any incoming c
24. NOKIA User s Guide Installation Guide Nokia 610 Car Kit Phone 9362625 Issue 1 DECLARATION OF CONFORMITY We NOKIA CORPORATION declare under our sole responsibility that the product TFE 4 is in conformity with the provisions of the following Council Directive 1999 5 EC A copy of the Declaration of Conformity can be found at http www nokia com phones declaration of conformity CE 168 Copyright 2004 Nokia All rights reserved Reproduction transfer distribution or storage of part or all of the contents of this document in any form without the prior written permission of Nokia is prohibited US Patent No 5818437 and other pending patents Tegic Communications Inc All rights reserved Nokia Nokia Connecting People and Navi wheel are trademarks or registered trademarks of Nokia Corporation Other products and company names mentioned herein may be trademarks or tradenames of their respective owners Bluetooth is a registered trademark of Bluetooth SIG Inc 2 Copyright 2004 Nokia All rights reserved Nokia operates a policy of continuous development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice Under no circumstances shall Nokia be responsible for any loss of data or income or any special incidental consequential or indirect damages howsoever caused The contents of this document are provided as is Except as re
25. SIM access profile i Bluetooth wireless technology Bluetooth wireless technology is an international standard for wireless short range communication allowing you to establish a wireless radio connection between your car kit phone and a compatible device supporting Bluetooth wireless technology within a maximum range of 10 metres Such devices may include for example a compatible mobile phone laptop computer or wireless headset The wireless connection between the compatible devices established via Bluetooth technology is free of charge for the user Bluetooth SIM Access Profile Bluetooth SIM Access Profile is an industry standard which allows a device e g a car kit phone which supports Bluetooth wireless technology to access a SIM card in a compatible mobile phone over a wireless link The car kit phone is then able to read and write data from to the remote SIM card inserted in the compatible mobile phone and to log into the GSM network A separate SIM card inserted in the car kit phone is not required in this case You have switched on a compatible mobile phone supporting the Bluetooth SIM Access Profile standard a valid SIM card is inserted in the compatible mobile phone Bluetooth wireless technology has been activated the compatible mobile phone Using a remote SIM card with Bluetooth wireless technology has been paired with the car kit phone and you get into your car Bluetooth How the GSM Bluetooth wireless connection
26. a legible and non modified original warranty card which clearly indicates the name and address of the seller the date and place of purchase the product type and the IMEI or other serial number or alternatively ii a legible and non modified original purchase receipt which contains the same information if such purchase receipt is presented to the seller dealer of the Product 8 This limited warranty is the Customer s sole and exclusive remedy against Nokia and Nokia s sole and exclusive liability against the Customer for defects or malfunctions of the Product This limited warranty replaces all other warranties and liabilities whether oral written non mandatory statutory contractual in tort or otherwise Nokia is in no event liable for any incidental consequential or indirect damage costs or expenses Neither is Nokia in any event liable for any direct damage costs or expenses if the Customer is a legal person 9 Any change or amendment to this limited warranty requires Nokia s prior written consent 9359974 03 WARRANTY CARD FILL IN WITH BLOCK LETTERS Purchaser s Name Address Country Phone Date of Purchase dd mm yy EI L I L Product Type on phone type label under battery J Product Model on phone type label under battery Livy Phone Serial No on phone type label under battery L a i Oe ERA AE Place of Purchase Store Name Store Address JU AN RT NN IMEI
27. act your network operator or service provider e The settings required to use GPRS applications have to be saved to your car kit phone To set up a GPRS access point with the display in standby gt Select the Settings menu and press 22 to open it gt Scroll with to the GPRS modem item and press A to select it gt To set up a new GPRS access point or to change an existing one press 22 again gt Press 2 to open the option Edit access point and enter the alphanumeric characters of the GPRS access point using the Navi wheel text editor to enter the characters b To save the name of the access point press OK in the Navi wheel text editor or press 7 b If you have made a mistake in selecting a character press N to delete it Press and hold this key if you wish to erase the complete entry For further information and to download modem driver software for your computer and or laptop computer visit the Nokia website at www nokia com Charges for GPRS and related applications You may be charged for GPRS data transmission or for an application which uses GPRS For details of charges contact your network operator or service provider Settings Security settings A Caution For some security settings for example when calls are limited to closed user groups or fixed dialling numbers you may find that in some networks emergency calls to certain numbers e g 112 or other official emergency call numbers are
28. ain the number of your voice mailbox from your service provider upon subscription to this service To enter it in your car kit phone with the display in standby gt Select the Settings menu and press 22 to open it gt Scroll with to Voice mailbox and press A to select this option gt Scroll with to Voice mailbox number and press SA to select this option gt Use the Navi wheel number editor to enter the number gt If you should select an incorrect number press N to delete it gt To save the number press OK in the Navi wheel number editor or press 7 42 Copyright 2004 Nokia All rights reserved Listening to voice messages To listen to voice messages with the display in standby gt Select the Settings menu and press A to open it gt Scroll with to the Voice mailbox item and press A to select it gt Scroll with A to Listen to voice messages and press 93 to select this option g Press and hold 2 to dial your voice mailbox direct l GPRS modem settings network service You can use your car kit phone as a modem to enable GPRS connectivity Note however that you will need a GPRS access point before you can do so Contact your network operator or service provider for information Before you can use GPRS e You need to subscribe to the GPRS service of your network operator or service provider e For the relevant information on the availability of GPRS and the necessary settings cont
29. all Barut Cetin while you have another call in progress This feature will allow you to accept this call network service The following settings are available for this feature gt gt Activate This option will activate the call waiting service Cancel This option will deactivate the call waiting function Check status Select this option if you wish to know whether or not this service is currently active for your car kit phone network query Press to accept an incoming call while you are engaged in an active call The first call will then be placed on hold Press to switch between the active call and the call on hold Press N to end the currently active call and return to the call on hold For further information see Settings on page 37 26 Copyright 2004 Nokia All rights reserved Options during a call The following options are available to you during an active call e Send DTMF e Mute e Contacts To view the list of options gt Press P2 during an active call gt Scroll with to the desired option and press 29 to select it Send DTMF DTMF tone strings can be used to send passwords or to access your answerphone for example gt Scroll with 4 to the desired number and press 2 to select it gt Repeat this step to select the other numbers in the string When a number has been selected it is immediately sent as a DTMF tone gt Press N to exit this option Pr
30. although a SIM card has been properly inserted into the radio unit contact your network operator or service provider If you are prompted to enter a PIN code enter the PIN code belonging to the car SIM card This will appear on the display as Press 92 to confirm If the PIN code has been entered correctly the car SIM card will be assigned user profile 1 The car kit phone then asks if you wish to copy the contact entries stored on the car SIM card to the car kit phone memory The car kit contact entries represent those in the internal car kit phone memory and not those on the car SIM card in use Remote SIM card assigned to active user profile If you have already assigned the SIM card inserted in a compatible mobile phone to the active user profile in the car kit phone when the car ignition is switched on the car kit phone will use Bluetooth wireless technology to automatically search for the compatible mobile phone in which the SIM card was installed the last time the car kit phone was used If this device is found in the list of devices with Bluetooth technology and you have activated the automatic PIN code entry i e no further authorisation request is required the car kit phone will automatically log in to the GSM network via the SIM card of the compatible mobile phone In this case you will not be prompted for input when switching on the car ignition as login is done automatically i If you use Bluetooth technology functio
31. and the Bluetooth SIM Access Profile standard Select the desired device from the list of devices 20 Copyright 2004 Nokia All rights reserved found and pair it with your car kit phone using a Bluetooth SIM Access Profile passcode For further information see Pairing using a Bluetooth passcode on page 52 If you are prompted to enter a PIN code enter the PIN code of the remote SIM card installed in the compatible mobile phone This will appear on the display as Press 92 to confirm The car kit phone will then ask if you wish to save the PIN code for a later automatic authorisation If the devices have been paired successfully and the PIN code has been correctly entered the remote SIM card of the compatible mobile phone selected will be assigned user profile 1 The car kit phone then asks whether you wish to copy the contact entries stored on the remote SIM card and in the compatible mobile phone to the car kit phone memory Afterwards the car kit phone accesses the SIM card installed in the compatible mobile phone to log into the GSM radio network If no compatible mobile phone is shown in the list of devices with Bluetooth SIM Access Profile you can select the car SIM card if it has been installed in the radio unit The car kit phone will then use this SIM card for operation For further information see Installing the car SIM card on page 19 Using the car SIM card If the message SIM rejected appears on the display
32. assigned to the active user profile If the feature requesting you to enter the PIN code at power on is active you will be prompted to enter the PIN of the car SIM card Some service providers may allow you to switch off the prompt requesting you to enter the PIN at power on Check with your service provider Search for Bluetooth phone Select this option to assign a remote SIM card installed in a compatible mobile phone that has not yet been paired with the car kit phone to the active user profile The car kit phone will then search only for mobile phones with Bluetooth SIM Access User data Profile technology which are in range and will display the related names in the list of Bluetooth devices Select a device pair it with the car kit phone and proceed as described in Names of paired devices on page 59 View active SIM card Select this option to view the name of the compatible mobile phone whose remote SIM card is assigned to the active user profile Copyright 2004 Nokia All rights reserved 59 User data Download settings You can copy contact data from any compatible mobile phone that supports Bluetooth wireless technology to your car kit phone Your car kit phone offers you three convenient options e SIM and phone mem This is the default setting that lets you copy both the contact data from the mobile s SIM card and from the phone memory to the car kit phone memory e SIM memory Select this option should you
33. atically answered after the first ring whenever your car kit phone is on and off mode is not active You can switch this feature on or off as desired To activate the automatic answer function with the display in standby gt Select the Settings menu and press A to open it gt Scroll with to the Call settings item and press 99 to select it gt Scroll with 4 to Automatic answer and press 22 to select this option gt Scroll with 444 to the desired setting On or Off and press A to select it Call waiting network service If the function Call waiting is activated you will be notified of any incoming call while you have another call in progress This feature will allow you to accept this call gt Press to accept an incoming call while you are engaged in an active call The first call will then be placed on hold gt Press to switch between the active call and the call on hold gt Press N to end the currently active call and return to the call on hold Settings You may choose from three options for this function e Activate This option will activate the call waiting service e Cancel This option will deactivate the call waiting function e Check status Select this option if you wish to know whether or not this service is currently active for your car kit phone network query To activate call waiting with the display in standby gt Select the Settings menu and press 22 to open it gt Scrol
34. atus on the display 36 Copyright 2004 Nokia All rights reserved Tone settings a You can choose the desired ringing tone for incoming calls change the volume and switch warning tones on or off as desired H it Tones Use the Navi wheel A to regulate the volume of the ringing tone when the car kit phone is ringing to notify you of an incoming call or to change the loudspeaker volume during a call in progress gt Select Tones and press 92 to open the menu gt Scroll with 44 to the desired option and press 29 to select it gt Follow the instructions shown on the display Ringing volume This option sets the loudspeaker volume for an incoming call Ringing tone This option offers you a range of ringing tones to choose from Select the one you would like to have notify you of an incoming call Warning tones This option lets you activate or deactivate special notification tones Settings H You may customise a number of the C Settings settings in your car kit phone iya gt To make any of the settings below select the Settings menu from the standby display and press 22 to open it Setting the time and date gt Scroll with to the Time settings item and press SA to select it gt Scroll with to Set the time and press A to select this option gt Scroll with A toset the hour Press 92 to take over the setting and continue with the minutes b Repeat the above step to se
35. ax transmission is more easily impaired than data or short message transmission Check the signal strength on your car kit phone display If the cellular signals are not strong enough to support a voice call data connection should not be attempted until you can find a location with better reception Reference information Copyright 2004 Nokia All rights reserved 63 Installation 10 Installation Your Nokia 610 car kit phone The Nokia 610 car kit phone is designed for installation in motor vehicles The sales package contains a convenient handsfree feature which allows you to make calls without holding the phone to your ear a separate input device for ease of use and an easy to read display Car kit phone equipment installation in the cockpit 64 Copyright 2004 Nokia All rights reserved The Nokia 610 car kit phone may only be installed by a qualified service technician using the approved original Nokia parts supplied in the sales package Please note that non observance of this requirement will result in loss of warranty End users should remember that the car kit phone comprises complex technical equipment that requires professional installation using special tools and expert know how Note that the instructions contained in this installation guide are general guidelines which apply for the installation of the car kit phone in an automobile However due to the wide variety of car types and models available on the ma
36. ce tag or making a call by saying a voice tag make sure to speak clearly into the microphone e Very short names are not accepted Use long names and avoid similar names for different numbers You must say the name exactly as you said it when you recorded it This may be difficult in for example a noisy environment or during an emergency so you should not rely solely upon voice dialling in all circumstances 46 Copyright 2004 Nokia All rights reserved Voice dialling You can assign voice tags to phone numbers and your car kit phone will automatically try to dial the number when it recognises the tag Recording a new voice tag This option lets you record a new voice tag assign it to a phone number and save it in the car kit phone memory You may save up to 12 voice tags with the related numbers per user profile in your car kit phone A voice tag can be any spoken word or words such as the name of a person gt To record a New voice tag select the Voice menu in the standby display and press 22 to open it gt Scroll with to the item Voice tags and press A to select it gt Scroll with to New voice tag and press 2 to select this option gt Scroll with A to the desired name in the contacts and press MA to select it gt Scroll with 234 to the desired number for which you wish to record the voice tag and press 22 to select it gt Press 22 again and you will be prompted to speak the voice tag
37. cle wireless equipment is improperly installed and the air bag inflates serious injury could result Failure to observe these instructions may lead to suspension or denial of telephone services to the offender or legal action or both Emergency calls Emergency calls may not be possible on all wireless phone networks or when certain network services and or phone features are in use Check with local service providers Vehicles A Caution This car kit phone like any wireless phone operates using radio signals wireless and landline networks as well as user programmed functions Because of this connections in all conditions cannot be guaranteed Therefore you should never rely solely upon any wireless phone for essential communications e g medical emergencies To make an emergency call F a If the phone or car ignition is not on Make an switch it on Check for adequate signal emergency call strength Some networks may require that a valid SIM card is properly inserted in the phone p gt Press and hold until Make an emergency call is shown on the display Confirm by pressing 25 gt Confirm the security inquiry Yes by pressing 92 or cancel by selecting No with A and pressing QA When making an emergency call remember to give all the necessary information as accurately as possible Remember that your car kit phone may be the only means of communication at the scene of an accident do not cut off the
38. des required for the car SIM card PIN code 4 8 digits The PIN Personal Identification Number protects your car SIM card against unauthorised use The PIN code is usually supplied with the SIM card Some service providers may allow you to switch off the prompt requesting you to enter the PIN at power on PIN2 code 4 8 digits The PIN2 code may be supplied with the car SIM card and is required to access some functions PUK and PUK2 codes 8 digits The PUK Personal Unblocking Key code is required to change a blocked PIN code The PUK2 code is required to change a blocked PIN2 code If these codes have not been supplied with your car SIM card please contact your service provider 14 Copyright 2004 Nokia All rights reserved 3 Your car kit phone Display SU 11 When the car kit phone is ready for use and no characters have as yet 1234 Ma been entered the standby display as depicted in the figure is shown In addition the logo of the network operator is show If you wish to activate a function amp using a voice tag you will first have Speak now to call the voice display To do so l MENU from the standby display press You may adjust the display illumination to optimise performance For further information see Display backlighting on page 40 Your car kit phone Display indicators The indicators described below may be shown on the display CM A 1234OMBCA d OB l
39. device is horizontally on the console between the driver s and front passenger s seats Loudspeaker SP 2 Pos 4 To ensure good acoustic quality mount the loudspeaker so that it is pointed in the user s direction We recommend that you mount the loudspeaker a minimum distance of 1 metre away from the microphone to avoid feedback The loudspeaker output of the car kit phone is direct current free Microphone HFM 8 Pos 5 I Use of any other microphone than the microphone supplied with the car kit phone HFM 8 may impact the transmission quality Mount the handsfree microphone approx 30 cm from the user s head and position it so that it points towards the user s mouth Experience has shown that the best locations are near the rearview mirror or to the left of the sun visor Check to make sure the microphone does not impair control or operation of the vehicle We recommend that you keep the microphone a minimum distance of 1 metre away from the car kit phone loudspeaker to avoid feedback Mounting Use the double sided adhesive tape supplied to fix the microphone as this will prevent noise from the car body being transmitted into the interior Take care to mount the microphone so that it is not exposed to air streams from the vents Do not lay the microphone cable in the heating ventilation or AC system If the mute radio cable has been connected when you accept an incoming call or when an outgoing call is established the syste
40. e room for new tapes 50 Copyright 2004 Nokia All rights reserved Bluetooth wireless technology amp Bluetooth wireless technology is an international standard for wireless short range communication allowing you to establish a wireless connection between your car kit phone and a compatible device supporting Bluetooth wireless technology Such devices may include for example mobile phone a laptop computer or a wireless headset F ej Bluetooth Since devices with Bluetooth technology communicate using radio waves your car kit phone and the other device do not need to be in direct line of sight The two devices only need to be within a maximum of 10 metres of each other although the connection can be subject to interference from obstructions such as the car body or from other electronic devices The car kit phone supports Bluetooth SIM Access Profile technology for wireless access to the remote SIM card of a compatible mobile phone and the Bluetooth headset feature for wireless connection of a compatible headset If you wish to use this function make sure that both the car kit phone and the other device supporting Bluetooth technology are switched on There may be restrictions on using such devices in some countries Check with your local authorities The connection via Bluetooth wireless technology is not subject to separate charges Bluetooth wireless technology Activating and deactivating Bluetooth The Bl
41. e Bluetooth menu and press to open it gt Scroll with to Visibility and press amp to select this option gt Scroll with A to the desired option On or Off and press CA to select it Even if you car kit phone s visibility has been activated it will not be visible for other Bluetooth devices if it is part of an existing Bluetooth wireless connection To make your car kit phone visible while is it engaged in an existing Bluetooth wireless connection select the option Allow second connection Second Bluetooth connection This setting is required if your car kit phone is to be visible for other devices with Bluetooth technology while it is being used in an existing Bluetooth SIM Access Profile wireless connection to a compatible mobile phone This feature interrupts the existing Bluetooth SIM Access Profile wireless link for a short time so that during this interval other devices with Bluetooth technology e g a laptop can request a wireless connection via Bluetooth technology before the car kit phone then automatically re establishes the Bluetooth SIM Access Profile connection to the compatible mobile phone Copyright 2004 Nokia All rights reserved 55 User data When this setting is selected the car kit phone will be visible for other Bluetooth devices for a period of time of 30 seconds before the original Bluetooth wireless connection is re established When your car kit phone is not connected to a compatible d
42. e Navi wheel to the right to scroll down through a list of options Press the Navi wheel to select a desired option Press this key to delete an entry made Or press this key to return to the previous menu level see the list of menu functions Press and hold this key to clear the display and return to the standby display J 8 II 28 Copyright 2004 Nokia All rights reserved List of menu functions Messages m Inbox Call Reply with template Save as template Delete Copy to phone essage settings Message centre number Reply via same centre m View templates a E E ZE E EE E m Send m Delete Call regist a Missed calls m Received calls a Dialled numbers Contacts m Search m Delete m Memory status Tones m Ringing volume m Ringing tone Warning tones Settings Set time and date m Set the time m Time format m Set the date m Date format Call settings m My number sending m Set by network a On a Off m Call divert Divert all voice calls Divert if busy Divert if not answered Divert if out of reach Divert if not available Cancel all diverts a Automatic answer a Off m On m Call waiting m Activate m Cancel m Check status Phone settings List of menu functions a Language Backlight settings m Cell info display On Off m Network selection m Automatic a Manual m Power down timer Voice mailbox m Listen to voice messages m Voice mailbox number GPRS modem Security settings m PIN code
43. e short text messages from other mobile users if this service is enabled SMSC number The SMSC Short Message Service Centre number is needed for sending of short messages 74 Copyright 2004 Nokia All rights reserved LIMITED MANUFACTURER S WARRANTY PART OF EUROPE amp AFRICA REGION This limited warranty shall apply in part of Nokia Mobile Phones Europe 8 Africa Region unless a local warranty exists Nokia Corporation Nokia Mobile Phones Nokia warrants that this NOKIA product Product is at the time of its original purchase free of defects in materials design and workmanship subject to the following terms and conditions 1 This limited warranty is given to the end purchaser of the Product Customer It shall neither exclude nor limit i any mandatory statutory rights of the Customer or ii any of the Customer s rights against the seller dealer of the Product 2 The warranty period is twelve 12 months from the date on which the first Customer purchased the Product In case of a subsequent purchase or other change of owner user such warranty period shall continue for the remaining part of the twelve 12 month period and otherwise remain unaffected This limited warranty is only valid and enforceable in the following countries Bosnia Bulgaria Croatia Cyprus the Czech Republic Estonia any member state of the European Union Hungary Iceland Israel Latvia Lithuania Macedonia Malta Norway Poland Roma
44. eceiver components of the compatible mobile phone are automatically switched on again and the mobile phone logs into the GSM network using its SIM card In this case when wireless phone use is prohibited or when it may cause interference or danger ensure that the car kit phone is changed over to off mode and be sure to switch off the compatible mobile phone Switching on off and off mode Copyright 2004 Nokia All rights reserved 23 Call functions 5 Call functions Voice dialling 8 You can make a phone call simply by Speak now saying a voice tag that has been added T MENU to a number in the contacts Name tags may be added to up to 12 of the numbers stored in your contacts Any spoken word or words such as the name of a person can be used as a voice tag to voice dial a call Before using voice dialling note that e Voice tags are not language dependent They are dependent on the speaker s voice e Voice tags are sensitive to background noise Record them and make calls in a quiet environment e When recording a voice tag or making a call by saying a voice tag speak clearly into the microphone e Very short names are not accepted Use long names and avoid similar names for different numbers You must say the name exactly as you said it when you recorded it This may be difficult in for example a noisy environment or during an emergency so you should not rely solely upon voice dialling in all circumstanc
45. ed devices For further information see Searching for accessories with Bluetooth technology on page 51 48 Copyright 2004 Nokia All rights reserved Recording voice commands This option allows you to record a voice command one or more words acting as a spoken command and assign it to a function in the list of voice commands gt With the display in standby scroll with 4 to the Voice menu and press 2 to open it gt Scroll with to the item Voice commands and press M to select it gt Scroll with A to the New voice command and press A to view the list gt Scroll with A to the desired function for which you wish to record a voice command and press 22 to select it gt Press 22 again and you will be prompted to speak the voice tag you have selected for this entry gt Follow the instructions shown on the display The voice command list includes the phone functions listed for voice commands Each function on the list can be checked and edited using the options below e Play voice commands This option will play back the voice command as recorded e Change You can record a new voice command for a selected entry replacing the existing one e Delete voice command Select this option to erase a voice command and make room in the memory for a new one You can use a shortcut to access the list of voice commands direct from the standby display gt Press and scroll left with KR gt You can now view the
46. es Before you can use this feature you will have to record voice e tags for numbers stored in the car kit phone s contacts For further information see Voice tags on page 46 24 Copyright 2004 Nokia All rights reserved gt To voice dial a number press 2 and the message Speak now will appear on the display gt Say the voice tag belonging to the desired number loudly and clearly To indicate that it has recognised the voice tag your car kit phone will play back the voice tag as recorded and then automatically dial the number assigned to it 1 5 seconds later Dialling from the contacts name search a You can call a number simply by selecting a name from the contact entries H CONTACTS ABCJEFGHIJ gt With the display in standby scroll with 4 to the desired letter of the alphabet in the contacts and press 99 to open the list of names beginning with this letter gt Scroll with to the desired name and press to dial the number stored with the name You can assign as many as five phone numbers to an entry in the contacts with different symbols used to differentiate the entries If no other symbol is selected the first number saved under a name is indicated with IE General Other number types used to differentiate entries are a Mobile Home alld Office and Wi Fax amp To call any one of the other numbers PAS EERE stored for a name 123456 f gt Press 2 and scroll with
47. essing N returns to the call display Any call in progress will remain active Mute call r If desired you can mute a call in Muted progress by selecting the option Mute y UNMUTE which switches off the microphone The message Muted then appears on the display b Press 2 to unmute the microphone Contacts During a call you may wish to view contact entries to check a number for example or to give the caller a particular number To view contacts gt Scroll with to the contact entries gt Press N to exit the contacts Accepting or refusing an incoming call p gt Press to accept an incoming call and when finished press N to end it b Press N to refuse an incoming call If the function Divert if busy has been activated network service and your incoming calls are directed to another number such as your voice mailbox number any call you have refused will also be diverted to this number For more information see Call divert network service on page 38 Accepting or refusing an incoming call Copyright 2004 Nokia All rights reserved 27 Using the menu 6 Using the menu The Nokia 610 car kit phone offers you an extensive range of functions which are grouped in menus Accessing a menu function To access the menu from the standby display press 22 You can then navigate the menu using the following keys Turn the Navi wheel to the left to scroll up through a list of options Turn th
48. evice using Bluetooth wireless technology its visibility for other Bluetooth devices depends on the setting made in the Visibility menu In this case it is not necessary to select the second Bluetooth connection option for example in order to establish a wireless connection from a device such as a laptop with Bluetooth technology to the car kit phone gt To access this option with the display in standby scroll with FA to the Bluetooth menu and press 2 to open it gt Scroll with A to Allow second connection and press EP to select this option gt Scroll with KA to the desired option Yes or No and press to select it 56 Copyright 2004 Nokia All rights reserved User data The car kit phone can store and administrate data or settings under two different user data profiles A user profile for example includes contact entries name tags and voice commands or car kit phone settings Now two users sharing the car can access their personalised user data using the same SIM card simply by activating their personal user profile i The indicator for the currently active user profile is shown in the status row of the display If user profile 1 is active a small black phone icon is shown user profile 2 is indicated by a small white phone icon if active One of the user profiles is active in the car kit phone at all times When the car kit phone is put into service for the first time user profile 1 is active Download contact
49. feature when accessing the SIM card of a compatible mobile phone connected to your car kit phone via Bluetooth SIM Access Profile technology you will have to make the corresponding settings in the compatible mobile phone For further information see the user s guide applicable for the compatible mobile phone with Bluetooth technology that you are using You can choose from three options for this function when using the car SIM card installed in your car kit phone e Off The fixed dialling numbers function is deactivated e Number list This option allows you to view the phone numbers that may be used for outgoing calls e On The fixed dialling numbers function is active To set up fixed dialling numbers with the display in standby gt Select the Settings menu and press 22 to open it gt Scroll with to the Security settings item and press M to select it gt Scroll with to Fixed dialling and press 22 to select this option gt Scroll with to the desired option and press 92 to select it gt Follow the instructions shown on the display For further information see Access codes required for the car SIM card on page 14 Equaliser settings Your car kit phone supports a variety of options for output over a loudspeaker e Direct connection to the SP 2 loudspeaker supplied in the sales package e Connection to a compatible car radio loudspeaker over an additional relay that switches audio output over to
50. ghts reserved 69 Important safety information 12 Important safety information Traffic safety Remember that the safety of operating a motor vehicle in traffic requires the full attention of all motorists Only use the features offered by your car kit phone if traffic conditions permit safe use Remember road safety always comes first Operating environment Remember to follow any special regulations in force in any area and always switch off your car kit phone whenever it is forbidden to use it or when it may cause interference or danger Electronic devices Most modern electronic equipment is shielded from radio frequency RF signals However certain electronic equipment may not be shielded against the RF signals from your car kit phone 70 Copyright 2004 Nokia All rights reserved Pacemakers Pacemaker manufacturers recommend that a minimum separation distance of 20 cm be maintained between the vehicle antenna and a pacemaker to avoid potential interference with the pacemaker These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research If you have any reason to suspect that interference is taking place switch your car kit phone over to off mode immediately Potentially explosive atmospheres Switch your car kit phone over to off mode see Off mode on page 22 when in any area with a potentially explosive atmosphere and obey all signs and instructi
51. he instructions shown on the displays of the two devices If the car kit phone has found a compatible mobile phone which supports the Bluetooth SIM Access Profile standard you will be prompted to enter a special Bluetooth passcode In this case the car kit phone will show a randomly chosen 16 character long numeric code on the display which you now have to key into the compatible mobile phone to be paired with the car kit phone Note that you will have to be prepared to do this quickly This passcode is used only once and you do not have to memorise it Bluetooth wireless technology The wireless connection using Bluetooth SIM Access Profile technology meets the high security requirements demanded for Bluetooth technology For this reason use of a 16 character long numeric code is mandatory when two devices are to be paired with Bluetooth SIM Access Profile technology If the compatible mobile phone supporting Bluetooth SIM Access Profile technology should itself generate a random 16 character long numeric passcode you can use this passcode if desired To do so within 3 seconds delete the Bluetooth passcode on the car kit phone display by pressing N and then enter the 16 character long numeric code from the mobile phone into the car kit phone using the Navi wheel number editor View active devices with Bluetooth technology To show the currently active devices with Bluetooth technology that are sharing a connection with your car k
52. hnical standard for mobile radio networks Glossary HSCSD HSCSD High Speed Circuit Switched Data makes data connections faster for attractive GSM data services For further information see HSCSD High Speed Circuit Switched Data on page 62 IMEI The IMEI is the serial number of your device and is supplied with the car kit phone PIN code The PIN Personal Identification Number is a 4 to 8 digit code which protects your SIM card from unauthorised use The PIN code is supplied with the SIM card For further information see Access codes required for the car SIM card on page 14 PUK code The PUK Personal Unblocking Key is an 8 digit code which is required to change a disabled PIN code The PUK code is supplied with the SIM card If you lose the code or it has not been provided with the SIM card contact your network operator Remote SIM card The remote SIM card is inserted in the SIM card reader of the compatible mobile phone connected to the car kit phone over a Bluetooth SIM Access Profile wireless connection Copyright 2004 Nokia All rights reserved 73 Glossary SIM card The SIM Subscriber Identity Module card contains all the information the cellular network needs to identify the network user The SIM card also contains security related data SMS The network service SMS Short Message Service allows you to send short text messages of up to 160 characters to mobile phones and to receiv
53. if Shows the signal strength of the cellular network at the current location The higher the bar the stronger the signal Indicates an ongoing call You have received one or more text messages Indicates unread text messages The call diverting feature is on network service See Call divert network service on page 38 The home zone service is active network service gt L RS You may enter numbers Turn the Navi wheel to the left You may speak now N W va Turn the Navi wheel to the right You may enter letters P zx 25 Copyright 2004 Nokia All rights reserved 15 Display SU 11 Shows that roaming is active The network has deactivated the encryption function The ringing tone is switched off Bluetooth wireless technology is activated see Bluetooth wireless technology on page 51 User profile 1 is in use See Change user on page 58 User profile 2 is in use See Change user on page 58 Additional indicators may be displayed Call indicators 16 ka Bil Indicates an active voice call Indicates that a voice call has been disconnected Voice calls have been switched over to the headset Data communication is active Fax communication is active Indicates an active GPRS connection Indicates an inactive GPRS connection The call is on hold 16 Copyright 2004 Nokia All rights reserved General indicators T ze E a Y PIPE G Indicates
54. in service for the period of time that has been set using the power down timer function For further information see Power down timer on page 41 Check your car kit phone equipment regularly to ensure that it is correctly mounted and is working properly Using a car SIM card To operate your car kit phone with a separate car SIM card you will need to insert a valid car SIM card in the radio unit For further information see Installing the car SIM card on page 19 Using a remote SIM card You can operate the car kit phone using a remote SIM card under the following conditions e The remote SIM card is inserted in a compatible mobile phone which supports Bluetooth wireless technology and the Bluetooth SIM Access Profile standard For information on compatible mobile phones see the Nokia website http www nokia com e To access the remote SIM card the compatible mobile phone first has to be paired with the car kit phone via Bluetooth wireless technology For further information see Pairing using a Bluetooth passcode on page 52 e The compatible mobile phone is on sufficient battery power is available and Bluetooth wireless technology is activated Copyright 2004 Nokia All rights reserved 13 Stickers in the sales package Stickers in the sales package The stickers that come with your car kit phone are important for service and related purposes p gt Attach sticker B to your warranty card Access co
55. ions are available for selection Assign SIM card View active SIM card and Download settings gt Scroll with 444 to the desired option and press A to se lect it Assign SIM card An active user profile always has a SIM card assigned to it When personalising user profile 1 or 2 for the first time observe the information set out in Getting started on page 19 To assign a new SIM card to the car kit phone select one of the following options gt Names of paired devices Car SIM card and Search for Bluetooth devs gt Scroll with 444 to the desired option and press 2 to se lect it Names of paired devices If you select a mobile phone from the list of paired mobile phones the car kit phone will establish a Bluetooth SIM Access Profile connection to the paired mobile phone and you may be prompted to enter the PIN code belonging to the remote SIM card installed in the paired mobile phone The car kit phone will then ask if you wish to save the PIN code you have just entered for a later automatic connection or whether it is to request authorisation the next time a Bluetooth wireless link is to be made If the operating voltage is interrupted the PIN code of the remote SIM card stored in the car kit phone will be erased from the memory If you decide to save the PIN code you should be aware that this is done at your own risk Car SIM card If you select this option the car SIM card inserted in the radio unit will be
56. it phone with the display in standby gt Scroll with to the Bluetooth menu and press GY to open it gt Scroll with to View active devices and press A to select this option If desired you can end an existing Bluetooth wireless connection between two devices in this menu View paired devices You can view a list of Bluetooth wireless technology paired devices by selecting this option Some of the options below may be available depending on the status of the device or the connection gt To view the list of paired devices with the display in standby scroll with to the Bluetooth menu and press 2 to open it gt Scroll with to View paired devices and press to select this option gt The list of paired devices will be shown on the display Scroll with to the desired compatible device and press to select it gt Scroll with A to the desired option and press 9 to select it gt Follow the instructions shown on the display Note that the latest pairing will be listed at the top Create connection This option establishes a wireless connection to a paired device with Bluetooth technology Delete pairing Select this option to remove a device from the list of paired devices with Bluetooth technology Copyright 2004 Nokia All rights reserved 53 Bluetooth wireless technology Request authorisation You can define whether the connection from the paired device is to be established aut
57. ites 00 2 cece eee 25 Table of contents Call waiting service e cee aaa 26 Options during a call cece e eee 26 Accepting or refusing an incoming call 27 Using THEMEN cance ews tere Bee 28 Accessing a menu function 28 List of menu functions 28 Menu TUNCHONG cutee deed atl dame aaa a 31 MESSAGES naaapi aasa na nmin 31 Call register oo cee cece a 33 Contacts maban Kasama bababaan 35 Tone settings cee eee eee eee 36 SETTINGS aka DARANGAN shad EERE nae eave E 37 VOICE TAS c cc cc gee deen ye eee ere EEE ee ae 46 Recorder aicut a etia Kaka taeda ered 49 Bluetooth wireless technology 51 User data aaa Gya mak Lan dame we eke 56 Receiving and forwarding business cards and a Ea AA 61 Receiving a business card or calendar item 61 Data KANSMIBSION sassi LanG Pan wi Rw 62 GPRS General Packet Radio Service 62 HSCSD High Speed Circuit Switched Data 62 Reference information 44 62 MstallatiON xa paaa aid eee eee a ea eE SE aE es 64 Your Nokia 610 car kit phone 64 Safety first 2 kanak ANG DIA des 65 Copyright 2004 Nokia All rights reserved 3 Table of contents MOUNTING ssc anga ma bada maka aa eyes 65 Equaliser settings a 68 FUNCTION TeSt ev a cae ey ee eka ee ee 68 Scope of supply 000 aaa 68 Rare and MAINTENANCE a KG ieee eae ae 69 Important safety information
58. kit phone memory and not those on the car SIM card in use Switching off the phone When you switch off your car s ignition the car kit phone will not be switched off automatically it remains in service for the period of time that you have set using the power down timer If you are engaged in an active call the car kit phone will not automatically switch off at the end of this time The power down timer will not start to count down until after the active call is over I The factory setting for the power down timer is zero minutes Off mode amp To change over to off mode when your car s ignition is switched on gt Press and hold N b Then press and hold m When your car kit phone is in off mode the display as depicted in the figure above is shown gt To put your car kit phone back into service press mf gt Follow the instructions shown on the display i When the car kit phone is in off mode an established wireless Bluetooth SIM Access Profile link between the car kit phone and the compatible mobile phone remains active This means that the GSM transmitter and receiver 22 Copyright 2004 Nokia All rights reserved components of the compatible mobile phone stay switched off If the wireless Bluetooth SIM Access Profile link between the car kit phone and the compatible mobile phone is interrupted e g if the compatible mobile phone is moved out of range when the user leaves the car the GSM transmitter and r
59. l To make a voice call from the standby display just press the key on the input device and speak the desired voice tag Before you can use this feature you will have to record voice tags for contact entries stored in the car kit phone s contacts For further information see Voice dialling on page 24 and Voice dialling on page 46 Voice commands H 8 You have a selection of phone functions Speak now which can be activated by saying a voice T menu command As many as three voice tags for the voice commands can be added You can activate the voice command in the same way as making a call by using a voice tag With the display in standby press the key on the input device and speak the voice command for the desired function Before you can use this feature you will have to record command tags for the desired functions in the car kit phone For further information see Voice commands on page 48 Voice recorder a This feature acts as a dictaphone CI m a Recording allowing you to record personal voice STER memos You may make up to 10 recordings for a total of five minutes recording time To start recording from the standby display press and hold the key on the input device To play a recorded speech memo you may either use a personal voice command e g Play memo or select the option Play in the Record menu a Special features Copying contact entries from your mobile phone F a If
60. l with to the Call settings item and press to select it gt Scroll with to Call waiting and press 92 to select this option gt Scroll with to the desired setting and press A to select it Copyright 2004 Nokia All rights reserved 39 Settings Phone settings Select this option to customise your car kit phone settings Display text language This option allows you to select the language that display texts are to be shown in If Automatic is selected the phone selects the language according to the information stored on the SIM card To set the display text language with the display in standby gt Select the Settings menu and press A to open it gt Scroll with A to the Phone settings item and press SA to select it gt Scroll with to Language and press 22 to select this option gt Scroll with to the desired language and press SA to select it 40 Copyright 2004 Nokia All rights reserved Display backlighting You can adjust the brightness of the display s backlighting for better viewing comfort To adjust the backlighting with the display in standby gt Select the Settings menu and press 2 to open it gt Scroll with to the Phone settings item and press A to select it gt Scroll with to Backlight settings and press A to select this option gt Scroll with A to the desired backlighting setting and press MA to select it Cell info display When this function i
61. lay the message itself the sender or sender s phone number and the date and time the message was received Your car kit phone comes with a number of options for handling the message selected gt Press DM gt Scroll with A to the desired option and press 2 to select it Copyright 2004 Nokia All rights reserved 31 Messages Call Select this option to make a call to the sender s phone number Reply with template You can reply to a short message using a template that you have prepared yourself Select the option Reply with template to view the list of the templates stored in your car kit phone Save as template This convenient option lets you save a received SMS as a template To use the template select the option Reply with template to view the list and send the message Erase Select this option to delete a short message 32 Copyright 2004 Nokia All rights reserved Message settings To be able to send short messages you first need to make some settings on your car kit phone Message centre number You receive this number from your service provider This option saves the phone number of the message centre which you need to send text messages Reply via same centre network service Replies to short messages are typically handled by the SMS centre which the sender subscribes to Selecting Reply via same centre will allow the recipient of your message to send you a reply via your message centre
62. list of Voice commands gt Follow the instructions shown on the display Executing a voice command When an application using the GPRS connection is sending or receiving data you cannot execute a voice command To do so you must first end the application using the GPRS connection F D B H Speak now To execute a voice command T MENU b Press 9 The message Speak now will appear on the display gt Say the voice command loudly and clearly Your car kit phone will play back the voice command and automatically perform the function assigned to it 1 5 seconds later Recorder Recorder a The tape recorder feature allows you to db Recorder record pieces of speech sounds or an 1 active phone call This is especially useful if you need to note information during a call for example you can record a name or a number to be written down later Obey all local laws governing recording of calls Do not use this feature illegally You can make up to 10 recordings as long as you do not exceed an overall recording time of five minutes Each recording is saved together with the running number the length and time of the call New recordings are automatically saved in the memory When the memory is full the message No memory to save rec will be shown on the display To be able to make new tape recordings you will first have to erase some old ones gt Press and hold 9 to begin recording during a phone call Co
63. m electronic equipment and devices or from surrounding traffic may impact the transmission quality Handovers As the car kit phone user moves from one network cell to another the signal strength of the channel drops and the cellular telephone exchange may hand the user over to a different cell and frequency where the signal is stronger A cell handover may also occur when the user is stationary due to varying cellular traffic loads Such handovers may cause delays Dead spots and dropouts Dead spots are areas where radio signals cannot be received Dropouts occur when the car kit phone user passes through an area where the radio signal is blocked or reduced by geographic or man made obstructions such as hills or high buildings The consequences may be interruptions in service or the connection may fail Low signal strength Due to either distance from a base station or obstacles between your car kit phone and the base station the radio signal strength from a cell site may not be strong or stable enough to provide a reliable cellular connection for trouble free reception or transmission Therefore to ensure the best possible communication remember to take the following points into consideration when using your car kit phone Data and fax transmission will work best when the car is stationary as this ensures that the signal strength will remain constant Attempting cellular communication while in a moving vehicle is not recommended F
64. m will automatically mute your car radio and the call will be switched over to the car kit phone loudspeaker System cable PCU 4 Pos 6 The system cable connects the car kit phone to the car s electronics system See the wiring diagram for exact instructions When laying the cables take care to position them so that they are located as far as possible from the electronics systems installed in your car in order to avoid electromagnetic interference Ensure that cables are placed so that they will not be subjected to mechanical wear and tear e g not laid under car seats or over sharp edges Copyright 2004 Nokia All rights reserved 67 Equaliser settings GSM antenna Pos 7 not included in the scope of supply Your car kit phone is designed to be connected to an external GSM antenna However if your car is equipped with a compatible radio GSM antenna with a frequency separating filter this may be used instead If your car does not come with a GSM antenna please contact your dealer for information on the best location for mounting and for the relevant installation guidelines Equaliser settings Your car kit phone supports a variety of options for output over a loudspeaker e Direct connection to the SP 2 loudspeaker supplied in the sales package e Connection to a compatible car radio loudspeaker over an additional relay that switches audio output over to the loudspeaker not included in the scope of suppl
65. n the Power down timer If you are engaged in an active call when the ignition is switched off the power down timer will not begin the countdown until the active call has ended i The original factory setting for the power down timer is zero minutes The power down delay is limited to a maximum delay time of 24 hours Remember that your car kit phone runs off the car battery When setting the power down timer take care not to drain your car battery To set the power down timer with the display in standby gt Select the Settings menu and press 22 to open it gt Scroll with 4 to the Phone settings item and press A to select it gt Scroll with to Power down timer and press 22 to select this option gt Scroll with A to set the time as desired gt Press A to activate the timer A message on the display will notify you that the power down timer has been set Copyright 2004 Nokia All rights reserved 41 Settings Voice mailbox Your service provider may offer you a voice mailbox service which you have to install before you can receive voice messages To access this mailbox you may need to save the number to your car kit phone Your service provider will give you further information on this service and let you know the number of your voice mailbox The voice mailbox features are available for the active device that is currently accessing the SIM card data Entering your voice mailbox number You will obt
66. nd press 22 to view the list Scroll with through the list 34 Copyright 2004 Nokia All rights reserved Dialled numbers You can use a shortcut to view the list of up to 10 of the last dialled numbers with the display in standby press and hold Alternatively to view the list of last dialled numbers with the display in standby p gt Press QA gt Scroll with to the Call regist menu and press 22 to open it gt Scroll with 444 to Dialled numbers and press 22 to view the list gt Scroll with A through the list Contacts H a All of the entries you make in the EE Contacts contacts are saved in the internal car kit T phone memory You can also copy entries from a SIM card or a compatible mobile phone that supports Bluetooth wireless technology to your car kit phone For further information see Download contacts on page 56 For each user profile up to 500 names can be stored in the car kit phone memory together with numbers for each name For further information see Querying the memory status on page 36 If the number of contact entries to be copied from the memory of a compatible mobile phone via Bluetooth wireless technology should exceed the available space in the car kit phone memory not all of the entries will be copied You can assign up to five phone numbers for each name When you select a name from the contact entries for example to make a call the general number i
67. nia the Slovak Republic Slovenia and Switzerland 3 During the warranty period Nokia or its authorized service company will repair or replace at Nokia s sole discretion a defective Product Nokia will return the repaired Product or another Product to the Customer in good working condition All parts or other equipment for which replacements have been provided shall become the property of Nokia 4 A repaired or replaced Product will not be given a prolonged or renewed warranty period 5 This limited warranty will not cover painted covers or other similar personalized parts In all cases that require unlocking or locking of an operator SIM lock Nokia will first direct the Customer to such operator for unlocking or locking of the operator SIM lock before repairing or replacing the Product 6 This limited warranty shall not apply to deterioration due to normal wear and tear This limited warranty shall further not apply if i the defect was caused by the fact that the Product has been subjected to use in contradiction with the owner s user manual rough handling exposure to moisture dampness or extreme thermal or environmental conditions or rapid changes in such conditions corrosion oxidation unauthorized modifications or connections unauthorized opening or repair repair by use of unauthorized spare parts misuse improper installation accident forces of nature spillage of food or liquid influence from chemical products
68. ns regularly e g to copy contact entries to the car kit phone memory from a compatible mobile phone you can deactivate the option Authorisation request in the compatible mobile phone Now connections between the devices via Bluetooth wireless technology can conveniently be made automatically without separate acceptance or Switching on off and off mode authorisation To do so scroll to the menu item View paired devices and select the option Request authorisation and set it to Off For further information see the user s guide applicable for the compatible mobile phone with Bluetooth technology that you are using However if you have not saved the PIN code belonging to the SIM card installed in the compatible mobile phone you will have to enter the PIN code each time the car ignition is switched on If the remote SIM card of the compatible mobile phone has been assigned to the active user profile but is not found the car kit phone will display the following list of options e Reconnect remote SIM card The search for the remote SIM card assigned to the active user profile will be repeated e Change user This feature lets you change the active user profile For further information see Change user on page 58 e Use car SIM for this session The car SIM card can be assigned to the active user profile temporarily The car SIM card will only be assigned to the active user profile as long as the car ignition is turned on If the
69. nto its original position and lock it into place by sliding it in the direction indicated by the arrow Close the cover of the radio unit and check to make sure it catches Copyright 2004 Nokia All rights reserved 19 Switching on off and off mode Switching on off and off mode A Caution If wireless phone use is prohibited or when it may cause interference or danger switch your car kit phone over to off mode The car kit phone is then deactivated even if the car ignition is on Switching on the car kit phone To switch on your car kit phone simply turn the ignition key Your car kit phone is connected to the ignition system so that turning the ignition on automatically switches your car kit phone on Depending on the SIM card in use when the car kit phone was last used different prompts will be displayed Initial operation a SIM card has not been assigned to the active user profile If you have not assigned a SIM card to the car kit phone or to the active user profile you will be prompted to select the desired display language to be used in the car kit phone for the active user profile Then you can choose whether you wish to use the active user profile with the car SIM card or a remote SIM card i e the SIM card installed in a compatible mobile phone e Operation using a remote SIM card The car kit phone will automatically begin searching for a compatible mobile phone which supports Bluetooth wireless technology
70. o answer Divert if out of reach Select this option to divert voice calls when you are out of reach of the network Divert if not available This option will divert all voice calls you receive when you are not available Cancel all diverts Use this option to cancel any active divert options To make call divert settings with the display in standby gt gt gt Select the Settings menu and press 22 to open it Scroll with 44 to the Call settings item and press A to select it Scroll with to Call divert and press 6 to select this option 38 Copyright 2004 Nokia All rights reserved gt Scroll with to the desired function and press 2 to select it You can select any of four options for each of the divert features offered Activate This option lets you select the number you wish to direct diverted voice calls to your voice mailbox or any other number Cancel Select this option for any call divert feature that is not to be activated Check status This option allows you to check the status of a call divert feature Delay Select this option to set the time period after which an incoming voice call is to be diverted if not answered The original factory setting for the delay time is 5 seconds Active call diverts are shown by an indicator on the display For further information see Display indicators on page 15 Automatic answer This feature will cause any incoming call to be autom
71. omatically No or whether the car kit phone is to ask for authorisation before pairing Yes when the device to be paired comes within Bluetooth range of the car kit phone Edit Bluetooth name Select this option to change the name of the device with Bluetooth technology which is paired with your car kit phone Use the Navi wheel text editor to make the desired changes gt To view the list of paired devices with the display in standby scroll with to the Bluetooth menu and press AA to open it gt Scroll with to View paired devices and press SA to select this option b The list of paired devices will be shown on the display Scroll with to the desired compatible device and press A to select it gt Scroll with to Bluetooth name and press 22 to select this option gt The name of the device selected will appear on the display Press A to confirm the selection b The message Edit Bluetooth name is shown on the display gt Scroll with to the desired option Yes or No and press 2 to select it If you have selected Yes the Bluetooth name currently in use will be displayed 54 Copyright 2004 Nokia All rights reserved To delete characters in the name press N Use the Navi wheel text editor and scroll with to select the desired characters and press 92 to enter them When you have finished entering the desired name press to save it The message Entry completed will appear on the display Pres
72. ons Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death Users are advised not to use the car kit phone when at a refuelling point Remember to observe the restrictions on the use of radio equipment in fuel depots fuel storage and distribution areas chemical plants or where blasting operations are in progress Areas with a potentially explosive atmosphere are often but not always clearly marked They include below deck on boats chemical transfer or storage facilities vehicles using liquified petroleum gas such as propane or butane areas where the air contains chemicals or particles such as grain dust or metal powders and any other area where you would normally be advised to turn off your vehicle engine Vehicles Only qualified personnel should service the phone or install the car kit phone in a vehicle Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly Do not store or carry flammable liquids gases or explosive materials in the same compartment as the phone its parts or accessories For vehicles equipped with an air bag remember that an air bag inflates with great force Do not place objects including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area If in vehi
73. ork service You can use high speed functionality when your car kit phone is connected to a compatible computer via Bluetooth wireless technology and when the modem drivers supporting high speed data software are installed on the computer and selected as an active modem Modem driver software and installation help can be found at the Nokia website http www nokia com For information on the availability of and subscription to high speed data services please contact your network operator or service provider 62 Copyright 2004 Nokia All rights reserved Reference information Remember that the safety of operating a motor vehicle in traffic requires the full attention of all motorists Only use the data transmission features offered by your car kit phone if traffic conditions permit safe use and check if local laws regulations restrict the use of mobile phones while driving Cellular transmission Your car kit phone employs the data transmission capabilities of the GSM network to send faxes short messages and e mails and to establish connections with remote computers network services GSM data capabilities of your car kit phone We recommend that you move the car to a location where the strongest possible cellular signal can be obtained A stronger signal allows more efficient data transmission Cellular data communications are subject to a number of factors that may cause interference Noise Radio interference fro
74. over to a wireless headset with Bluetooth technology you may need to break an existing Bluetooth wireless connection for example to a mobile phone For further information on searching for devices with Blue tooth technology see Download contacts on page 56 and User settings on page 58 If you wish to start Bluetooth pairing with a selected device supporting Bluetooth technology gt Press Da 52 Copyright 2004 Nokia All rights reserved Pairing using a Bluetooth passcode To create a connection using Bluetooth wireless technology you will need to exchange Bluetooth passcodes with the device you are connecting to for the first time This operation is called pairing The Bluetooth passcode is a 1 to 16 character long numeric code If the devices have been successfully paired you will not need to repeat this procedure when establishing further Bluetooth wireless connections between the devices Some devices come with a fixed Bluetooth passcode that is supplied with the device Please refer to the user s guide that is applicable for the accessory that you are using When prompted by the car kit phone enter this passcode If a fixed passcode is not supplied with a device with Bluetooth technology e g a mobile phone or the passcode prompt does not appear on the car kit phone display you can make up a suitable passcode When prompted enter this passcode into the two devices sharing a Bluetooth connection Then follow t
75. phone when traffic conditions permit this When sending messages via the SMS network service your car kit phone may display the words Message sent This is only an indication that the message has been sent by your car kit phone to the message centre number programmed into your phone This does not mean that the message has been received at the intended destination Inbox pE amp When you have received an SMS the mb E indicator and the number of new rae messages are shown on the display along with the notification 1 new message received Menu functions Any short messages sent to your car kit phone are shown in the order in which they are received i If you have established a Bluetooth SIM Access Profile connection to a compatible mobile phone all short messages received by the car kit phone are automatically forwarded to this compatible mobile phone Unread text messages are indicated by whilst read text messages are indicated by the fy symbol A flashing SMS indicator E21 means that the message memory is full To be able to send or receive a new message you will first have to delete some of the old ones If you have received more than one text message gt Select the Messages menu and press 22 to open it gt Select the Inbox option and press to view the list of messages gt Scroll with to the desired message and press 22 to read it gt Scroll with A to either browse through the message or disp
76. pyright 2004 Nokia All rights reserved 49 Recorder You can easily play back your recordings using a voice command Say the voice command and your car kit phone will begin with the recording last made With 23 you can skip to the next recording Before you can use this shortcut you will have to assign a voice command to this function in your car kit phone For further information see Voice commands on page 48 Record This option allows pieces of speech to be recorded and automatically saves the recording To make a recording with the display in standby gt Scroll with to the Recorder menu and press A to open it gt Scroll with to Record and press 29 to select this option gt Follow the instructions shown on the display If you are engaged in an active call and wish to make a recording gt Press and hold to start recording gt To end the recording press 2 All tape recordings are stored and numbered e g tape 1 To view the list of recordings with the display in standby gt Select the Recorder menu and press 22 to open it gt Scroll with to the desired recording and press SA to select it Two options are available for the recordings Play and Delete gt Scroll to the desired option and press A to select it gt Follow the instructions shown on the display Play You can play back a selected recording Delete You can use this option to erase a recording in order to mak
77. quired by applicable law no warranties of any kind either express or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose are made in relation to the accuracy reliability or contents of this document Nokia reserves the right to revise this document or withdraw it at any time without prior notice The availability of particular products and services may vary by region Please check with the Nokia dealer nearest to you 9362625 Issue 1 Table of contents FOr YOUR SHEDS Kaman PENE NATONG we 5 Network services aaa 6 About accessories aaa 6 Using a remote SIM card with Bluetooth wireless technology aaa AG 7 General informati sasir rapran naasen 9 Overview of the car kit phone equipment 9 Special features anna 10 Before putting your phone into operation 13 Stickers in the sales package 14 Access codes required for the car SIM card 14 YOU Car KU POONG 1x Aka B NAGANA GA BAGAKA ae 15 Display SU 11 aaa 15 Basic components of the CUW 3 input device 17 DETUNG SAME aaa KABABAAN 19 Installing the car SIM card 19 Switching on off and off mode 20 SUE Cite aaa NAH KAG 24 Voice dialling 2 0 eee cece eee ee eee eee 24 Dialling from the contacts name search 00000 eee ee 24 Redialling wiviiseengerne de eveargeadeee 25 Using the Navi wheel to make a call 25 List of favour
78. right 2004 Nokia All rights reserved 9 Special features 6 System cables PCU 4 A set of cables is included for connection to the power supply and the ignition system and to mute the radio 7 GSM antenna not included in the scope of supply A compatible external GSM antenna is required for connection to the car kit phone Car kit phone equipment and cable connections 10 Copyright 2004 Nokia All rights reserved Special features For enhanced safety and operating comfort of wireless communication in the vehicular environment this car kit phone is equipped with a variety of special features tailored for automotive applications A number of these extras are sketched below Accessing a remote SIM card via Bluetooth SIM Access Profile technology This feature allows the car kit phone to access the remote SIM card in a compatible mobile phone For further information see Using a remote SIM card with Bluetooth wireless technology on page 7 To be able to use this feature you will first need to pair the compatible mobile phone with the car kit phone via Bluetooth wireless technology For further information see Bluetooth wireless technology on page 51 Voice dialling F a Voice dialling is a convenient way to Speak now select certain numbers from the MENU contacts which are then automatically dialled You may choose as many as 12 of your contact entries and train voice tags to initiate a phone cal
79. rket this guide cannot consider the individual technical requirements relevant for any particular vehicle Contact the vehicle manufacturer for further detailed information about the vehicle in question For information on installation locations for the car kit phone equipment visit the Nokia website at http www nokia com For important safety information and or instructions on the operation care and maintenance of your car kit phone see Important safety information on page 70 and Care and maintenance on page 69 Safety first The basic safety guidelines set out below are to be observed when installing the car kit phone Make sure that the car ignition is off and disconnect the car battery before beginning with the installation work and ensure that it cannot be reconnected inadvertently Do not smoke when working on the car Make sure that there is no source of fire or flame nearby Take care not to cause damage to electrical cables fuel or brake lines or safety equipment during installation work Make sure not to impact the steering or braking systems or other key systems essential for proper operation of the car when installing car kit phone equipment Check to make sure that deployment of the airbag is not blocked or impaired in any way RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles e g electronic fuel injection systems electronic anti skid braking systems
80. s You can use this feature to copy contact entries from the car SIM card inserted in the car kit phone or from a compatible mobile phone supporting Bluetooth wireless technology to the car kit phone memory i This feature is important because you do not have direct access to the contact entries stored on a car SIM card inserted in the car kit phone To access these numbers you first need to copy them into the car kit phone memory Follow the instructions shown on the display gt With the display in standby press 92 to access these settings gt Scroll with to the User data menu and press 2 to open it gt Scroll with to Download contacts and press 2 to select this option If you are operating your car kit phone using a remote SIM card the contacts stored in the compatible mobile phone will be copied direct to the car kit phone For further information see User settings on page 58 If you are operating your car kit phone using the car SIM card inserted in the radio unit three options will be available for selection View paired devices Car SIM card and Search for Bluetooth devs gt Scroll with to the desired option and press 2 to select it Paired devices with Bluetooth technology gt Scroll with A to the compatible mobile phone with Bluetooth technology name will be displayed in the list of paired devices whose contacts you wish to download via the wireless Bluetooth connection to the car kit phone
81. s 2 to confirm The car kit phone s Bluetooth name Use this option to change your car kit phone s Bluetooth device name which is shown to others The factory setting is Nokia 610 gt To view the name of the car kit phone scroll with to the Bluetooth menu and press 2 to open it gt Scroll with A to Bluetooth name and press 29 to select this option gt The name of the car kit phone will appear on the display Press A to confirm the selection gt The message Edit Bluetooth name is shown on the display gt Scroll with 44 to the desired option Yes or No and press EA to select it gt Use the Navi wheel text editor to change the Bluetooth name of the car kit phone as desired Car kit phone visibility In order to be able to establish a Bluetooth wireless connection between two compatible devices with Bluetooth technology the visibility of the Bluetooth devices must first be activated i Make sure that the Bluetooth function is activated in all compatible devices with Bluetooth technology to be used and that the visibility has been set to Shown to all For further information see the user s guide applicable for the compatible device with Bluetooth technology that you are using Bluetooth wireless technology You can activate or deactivate the visibility of the car kit phone The factory setting is on gt To change the visibility of your car kit phone with the display in standby scroll with to th
82. s activated information about the radio cell you are currently using will be shown on the display However you can only use this network service if the phone is booked into a cellular network based on Micro Cellular Network MCN technology Network selection The cellular network to which your car kit phone is to be connected can be selected either manually or automatically e Automatic Your car kit phone will automatically select a suitable available cellular network in the area e Manual You can view a list of available cellular networks and select any network that has a roaming agreement with your home network operator The car kit phone stays in manual mode until the automatic mode is selected or another SIM card is inserted into the phone To select the desired cellular network with the display in standby gt Select the Settings menu and press 22 to open it gt Scroll with to the Phone settings item and press 23 to select it gt Scroll with to Network selection and press 92 to select this option gt Scroll with A to the desired network and press A to select it gt Follow the instructions shown on the display Settings Power down timer Your car kit phone comes with a power down delay that keeps your phone in service for the period of time set even when the car s ignition has been switched off After you have switched off the ignition the car kit phone remains in operation for the time set i
83. s used by default unless you select another number Contacts Searching for names and numbers You can access the list of names and phone numbers quickly from the standby display gt Scroll with to the first letter of the desired name and press amp to select it b You can now view all the names stored in your contacts list which start with the letter selected They are listed in alphabetical order Scroll with A to the desired name in the list To make a call to this person press To end the call press N To return to the standby display press N For further information see Dialling from the contacts name search on page 24 gt gt gt gt Erasing contact entries You can erase one or more names and the related numbers from the contacts gt With the display in standby select the Contacts menu and press 92 to open the contacts gt Scroll with to Add contact and press 22 to select this option gt Scroll with to the desired option and press 92 to select it gt Follow the instructions shown on the display Copyright 2004 Nokia All rights reserved 35 Tone settings Querying the memory status This option allows you to view the free storage space in the car kit phone memory in With the display in standby gt Select the Contacts menu and press A gt Scroll with to the item Memory status and press 92 to select it b You can now view the memory st
84. st of missed received and dialled calls and T the time and date of your calls The phone registers missed and received calls only if the network supports these functions and if the phone is switched on and within the network s service area In these lists you can view up to 10 of the last calls made to your phone or received or up to 10 numbers you have last dialled They are provided for your reference The most current item is shown at the top of the list Three options are available for each of the items in the call register Call Time of call or Delete gt Select an entry in the desired list and press A gt Scroll with to the desired option and press 22 to select it gt Follow the instructions shown on the display Copyright 2004 Nokia All rights reserved 33 Call register Missed calls To view a list of up to 10 of the latest registered calls with the display in standby gt gt gt gt gt Press A Scroll with to the Call regist menu and press 22 to open it Scroll with to Missed calls and press 92 to view the list Scroll with A through the list Press and hold N to return to the standby display Received calls To view a list of up to 10 registered numbers of the latest calls you have received with the display in standby gt gt gt Press A Scroll with to the Call regist menu and press 22 to open it Scroll with A to Received calls a
85. t the minutes b Repeat the above procedure to access the options Time format Set the date and Date format to make the desired settings Settings Call settings This option lets you set a variety of call features To make call settings with the display in standby gt Select the Settings menu and press 22 to open it gt Scroll with to the Call settings item and press 99 to select it Own number sending network service e Set by network This will activate the setting you have agreed with your network operator e On Selecting this option will activate your caller ID the person you are calling will then be able to view your car kit phone number e Off If you do not wish your number to be sent to the called party use this option to deactivate your caller ID gt Scroll with A to the desired option and press 22 to select it Copyright 2004 Nokia All rights reserved 37 Settings Call divert network service With Call divert you can direct your incoming calls to another number for example to your voice mailbox number For details contact your service provider Your car kit phone offers you a wide variety of options to choose from Divert all voice calls This option will divert all incoming voice calls Divert if busy Select this option to divert voice calls when your number is busy or when you reject an incoming call Divert if not answered This option will divert all voice calls you fail t
86. the headset to activate it before speaking the voice tag When an application using the GPRS connection is sending or receiving data you cannot make a call using voice dialling To make a call using a voice tag you must first end the application using the GPRS connection Copyright 2004 Nokia All rights reserved 47 Voice tags Voice commands You have a selection of phone functions which can be activated by saying a voice command A voice tag may be assigned to as many as three of the commands on the list You can activate the voice command in the same way as making a call using a name tag Three functions are available e Play This option lets you play black selected recordings The last made recording will be played back first Press 93 while listening to a recording to skip it and go to the next one e Download contacts You can use this feature to copy contact entries from a compatible mobile which supports Bluetooth wireless technology or from the SIM card installed in the compatible mobile phone to the car kit phone memory If a wireless Bluetooth SIM Access Profile link has been established the contact entries stored on the compatible mobile phone will automatically be downloaded e Conn to Bluetooth headset This option allows you to establish a wireless link to a compatible paired headset which supports Bluetooth technology The option Search for audio accessories can be used to call the list of active or pair
87. u will have to make entries for contacts in the car kit phone For further information see Download contacts on page 56 i You may assign up to 5 phone numbers to any name entered in your contacts For further information see Contacts on page 35 Mobile data services using Bluetooth wireless technology Your car kit phone comes with a convenient feature allowing you to connect compatible external devices such as a compatible laptop computer to the car kit phone using Bluetooth wireless technology This means that you can now utilise GSM data services such as GPRS or HSCSD for mobile Internet access for a compatible laptop in the car Using a car SIM card You can also operate the car kit phone using a separate car SIM card that is inserted in the radio unit For further information see Getting started on page 19 Before putting your phone into operation Comfortable volume regulation with Navi wheel r a Regulate the volume of the ringing tone Pip notifying you of an incoming call simply soul by scrolling with A as needed You can also adjust the loudspeaker volume during an ongoing call with KA Before putting your phone into operation Please read the information set out below before putting your car kit phone into operation The phone is automatically switched on with the car s ignition When you switch off your car s ignition the car kit phone will not be switched off automatically it remains
88. uetooth function is always activated in your car kit phone However in other devices with Bluetooth technology e g mobile phones Bluetooth may have to be activated or deactivated in the device Make sure that Bluetooth is active in all devices supporting Bluetooth wireless technology that you wish to use with your car kit phone For further information see the user s guide applicable for the device with Bluetooth technology that you are using Searching for accessories with Bluetooth technology This feature allows you to search for accessories which support Bluetooth wireless technology e g a cordless headset with Bluetooth technology in your car gt To begin searching with the display in standby scroll with KA to the Bluetooth menu and press 22 to open it gt Scroll with to Search for audio enhancem and press PD to select this option The car kit phone will now begin to search for accessories supporting Bluetooth wireless technology Devices responding to this interrogation will be shown on a list with the device found last listed at the bottom gt Scroll with through the list l A wireless headset with Bluetooth technology can only be found by the car kit phone if there is no active Bluetooth wireless connection from the wireless headset to another compatible device supporting Bluetooth technology There Copyright 2004 Nokia All rights reserved 51 Bluetooth wireless technology fore to switch
89. wish to download only the contact data from your mobile phone s SIM card to the car kit phone e Phone memory This option copies the entries stored in the phone memory of your mobile to the car kit phone memory 60 Copyright 2004 Nokia All rights reserved 8 Receiving and forwarding business cards and calendar items You can receive or forward data such as business cards or calendar notes from or to a compatible mobile phone either via Bluetooth wireless technology or in the form of a short message Receiving a business card or calendar item If you have received a business card or calendar note via Bluetooth wireless technology or in the form of a short message you may select any of four options gt Press EP to view the list of options View This option allows you to view the business card or calendar note received Save for business cards only Select this option to save a business card in the car kit phone memory If a wireless Bluetooth SIM Access Profile link has been established to a compatible mobile phone the business card will automatically be forwarded to the compatible mobile phone Receiving and forwarding business cards and calendar items Forward You can forward a business card or calendar note that you have received to a compatible device using Bluetooth wireless technology or as a short message To forward a business card or calendar note gt Press amp to confirm receipt of the message
90. with Bluetooth wireless technology which supports a cable link to a compatible external GSM antenna and further compatible external devices General information Display SU 11 The separate display comes with generously sized easy to read fonts convenient 8s user customisable display positioning and configurable backlighting allowing display texts to be easily read Input device CUW 3 The input device comprises a set of function elements the Navi wheel and four keys The input device is specially designed so that accessing key telephone functions is made easier for the user allowing intuitive operation Loudspeaker SP 2 A separate loudspeaker is provided for top quality audio transmission of the acoustic signals from your car kit phone and voice transmission when calls are made Should you wish to use the loudspeakers belonging to your car radio instead please ask the service technician who is to install your car kit phone for professional assistance as the car kit phone may not be compatible with your system Microphone HFM 8 The handsfree microphone supplied in the sales package has been tailormade for the vehicular environment State of the art technologies geared for effective echo and noise suppression in automotive systems enable quality results even in poor conditions Selecting a suitable mounting location may also enhance the performance of the device For further information see Installation on page 64 Copy
91. works When the car ignition is switched on a wireless connection is established between the compatible mobile phone and the car kit phone via Bluetooth SIM Access Profile The car kit phone requests the compatible mobile phone to log out of the GSM wireless network and to deactivate the mobile phone components required for the GSM connection The car kit phone then uses Bluetooth SIM Access Profile to access the SIM card inserted in the compatible mobile phone remote SIM card and utilises this card s profile to log into the GSM network Now the car kit phone handles all incoming and outgoing calls and messages while accessing the SIM card of the compatible mobile phone Copyright 2004 Nokia All rights reserved 7 Using a remote SIM card with Bluetooth wireless technology With Bluetooth SIM Access Profile the car kit phone combines the advantages of a fixed installed car phone such as excellent audio quality use of a compatible external GSM antenna and optimum ease of operation with the advantages of a car kit installation e g use of the SIM card inserted in a compatible mobile phone or access to the relevant contact data And all this time the compatible mobile phone can conveniently be located in the user s briefcase there is no need for it to be inserted in a cradle for operation The wireless Bluetooth SIM Access Profile connection between the car kit phone and the compatible mobile phone is upheld either until the compatible
92. y e Connection to the compatible car radio loudspeakers via the line in input of your car radio You will need to adjust the audio level suitably if this option is selected gt To make the desired settings select the Settings menu gt Scroll with to the item Equaliser settings and press A to select it gt Scroll with to the desired option and press 9 to select it 68 Copyright 2004 Nokia All rights reserved Function test After your car kit phone has been installed it needs to be checked to ensure that it is working properly When testing the operation of the equipment also check that it has been mounted so that it in no way impairs the driver during operation of the vehicle I To make a wireless connection between your car kit phone and a compatible accessory with Bluetooth technology ensure that the devices are within the range necessary for Bluetooth transmission Remember that external devices need to be supplied with sufficient power for this feature check the battery pack hap sa of supply Radio unit TFE 4 e Display SU 11 e Input device CUW 3 e Loudspeaker SP 2 e Microphone HFM 8 e System cable PCU 4 11 Care and maintenance Your car kit phone is a product of superior design and craftsmanship and should be treated with care The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years Keep the car kit phone and all its parts and
93. you have a compatible mobile phone Download that supports Bluetooth wireless t contacts technology this feature allows you to copy contact entries from the mobile phone to the car kit phone To download the contacts from your compatible mobile you may either use a personal voice command e g Copy contacts or select the option Download contacts in the User data menu For further information see Download contacts on page 56 Multi user capability amp This feature lets you store personal entries or phone settings under two different user data profiles For example now contact entries voice tags for voice dialling and voice commands or ringing tones for two users can be saved and then accessed from the car kit phone Just activate your personal user profile to access your data For further information see Change user on page 58 USER DATA 1 User 1 Switchover to wireless headset ve amp This feature supports use of compatible pL Cee Bi headsets with Bluetooth technology y active You can switch calls over from handsfree mode where the car kit phone s microphone and loudspeaker system is used to a wireless headset that is comfortable and easy to use Press to switch incoming or ongoing calls over to your wireless headset Copyright 2004 Nokia All rights reserved 11 Special features To be able to use this feature you will first need to pair the compatible wireless headset and the car kit
94. you have selected for this entry gt Todo so follow the instructions shown on the display Voice tag list You can use this option to check all of the voice tags saved in your car kit phone memory and to edit the list gt gt To edit the list of voice tags select the Voice menu in the standby display and press A to open it Scroll with to the item Voice tags and press amp to select it Scroll with to List of voice tags and press 92 to select this option Scroll with 44 to the desired name in the contacts which you wish to edit and press A to select it Scroll with to the desired option and press 2 to select it Follow the instructions shown on the display Play This option will play back the voice tag as recorded Change You can replace any voice tag by a new one Select this option and say the new voice tag Delete voice tag Select this option to erase a voice tag and make room in the memory for a new voice tag Voice tags Voice dial a number Dr B k now MENU l Spe To voice dial a number gt gt Press 9 The message Speak now will appear on the display Say the voice tag belonging to the desired number loudly and clearly Your car kit phone will play back the voice tag and automatically dial the number assigned to it 1 5 seconds later To cancel voice dialling press N If you are using a compatible headset with Bluetooth technology press the key on

Nokia 610 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents