Nikon 105mm User's Manual
Contents
1. Nikon F is ruggedly constructed to stand up for years under normal use 1t may be damaged by shock heat water or misuse The following are some basic tips for keeping your camera in top condition Storage Keep the camera in an eveready case or compartment case when not in use to protect 1t from dust Avoid storing the camera in excessively hot cold or damp places Always attach a body cap when the camera body is stored separately Do not leave film in the camera for a long period of time Never leave the shutter or self timer cocked if the camera is to be stored overnight or longer Camera Body Brush the inside of the camera periodically using a soft brush Do not exert pressure on the shutter curtain as this may damage the curtain Keep the mirror free from fingerprints and dust If smudges or fingerprints persist use lens tissue moistened slightly with alcohol Lens Keep the lens surface free from fingerprints and dust as far as possible Use lens tissue to remove dust never use cloth or ordinary tissue If smudges or fingerprints persist use lens tissue moistened sparingly with alcohol Remember Even an approved lens cleaner can cause damage if it seeps into the lens mount Keep the camera away from water Avoid excessive moisture When using the camera near water guard against splashes especially salt water spray Never oil any part of the camera Lubrication should be left to an authorized serviceman Prior2. Photomic FTN finder incorporates the centerweighted thru the lens metering system and couples to shutter speed and aperture controls With the exception of the IEO Photomic FTN all viewfinders are phencmic Te gt interchanged in the same way anarai To remove the finder press the w finder release button on the back of Ur Len Finke the camera body The finder snaps loose and can be lifted out To attach a viewBinder set it in position and press down gently until it clicks into place press down gently until it clicks into place The Photomic FTN has a pair of pincer type clamps to position the finder and hold it snugly in place These clamps must be loosened by depressing the finder lock lever when removing or attaching the Photomic FTN Changing the focusing screen Seventeen different focusing screens are available for the Nikon F to match exactly any focal length lens or picture taking situation Any of the seventeen screens may be used with any of the finders available for the Nikon F To change the focusing screen first remove the viewfinder as described earlier Then turn the camera body upside down and press the finder release button a second time The screen will drop into your hand To attach a screen place 1t in position with the flat side facing down and the Nikon F mark pointing toward the front of the camera Press the finder release button and the screen will drop into place Caution Wh
3. finders For convenience when using flashhulbs or electronic flash the shutter speed markings are color coded to match the markings on the synchronization selector located under the transparent window just above the selector ring For details refer to the chapter on flash synchronization Setting the aperture To preset the lens aperture turn the knurled aperture ring on the lens barrel until the desired f number lines up with the black dot in the top center of the milled ring The diaphragm can also be preset for intermediate apertures between the click stopped markings HA perture and Depth of Field The lens aperture determines the amount of light which passes through the lens and strikes the film It also influences depth of field Apertures are expressed In f numbers with larger numbers representing smaller apertures For example 1 4 is larger than 1 8 and allows more light to reach the film Each f number admits exactly twice as much light as the next largest number so when the aperture 1s increased or decreased by one stop the exposure time required s doubled or halved respectively For example Aperture f 1 4 f 2 2 8 1 4 f 5 6 Relative Exposure Time seconds 1 500 1 250 1 125 1 60 1 30 Depth of field refers to a zone extending in front of and behind the plane of sharpest focus Within this zone blur or unsharpness of the image will be negligible and everything can be accepted as being in s
4. leader into any of the four slots in the take up spool l wi B ils i Unloading Set the A R ring around the shutter release button to A Advance and wind the film so that it passes under the take up spool with its emulsion side facing out Make sure that the perforations on the film mesh with the sprockets Replace the camera back and lock it by turning the lock to the close position Fold out the rewind crank and turn the rewind knob gently in the direction of the arrow to take up any slack in the cartridge Stroke the film advance lever to cock the shutter and make two blank exposures or until the frame counter on the film advance fever rests at 1 These blank exposures will dispose of the portion of film exposed during loading Make sure that the rewind knob rotates in the direction opposite the arrow when the film is advanced This indicates that the film has been loaded correctly and is being advanced Set the A R ring to R Rewind unfold the rewind x r 2 r crank and turn it with a nn constant gentle pressure in the direction of the arrow Avoid uneven or excessively fast rewinding The red dot on the shutter release button rotates while the film s being rewound and stops when the end of the film has been wound off the sprockets Then the camera back may be opened Caution Never load the camera in direct sunlight as this may result in accidental fogging of the flm To avoid nassthl
5. the Nikon F as follows After making the first exposure set the A R ring around the shutter release button to R and turn the rewind crank in the direction of the arrow until the red dot on the shutter release button rotates a full 360 degrees or slightly more Reset the A R ring to A and wind the shyster for the second exposure The film winding 1s confirmed by checking the red dot on the shutter release button which rotates a full 360 degrees Any shutter speed may be used for the second exposure The exposure counter will not compensate for the rewinding so the film in the camera will actually have one frame or two more than indicated Double exposures The use of a lens hood is recommended at all times to prevent extraneous light from striking the lens surface and causing flare or ghost and as an added measure of protection against damage to the lens Nikon lens hoods come in four types depending on the lens Screw In Snap On Slip On and Builtln They are calculated precisely for each focal length Nikkor lens to provide maximum protection against stray light To attach or remove the snap on lens hood simply depress the buttons on either side of the hood It will also fit directly over a screw in filter so both can be used on a lens at the same time When not in use the snapon hood can be reversed for storage on the lens and the lens and its hood can be stored together in the eveready case HA ccessories Lens Hoods The use o
6. Modern Classic SLRs Series Nikon F Camera Instruction Manual Forewards The Nikon F offers the quality performance handling convenience and versatility you need for truly professional shooting To get the best results from your camera a thorough familiarity with its operation is essential Study the instructions carefully and practice using the controls before loading any film in the camera Keep this booklet handy for ready reference until you have mastered its basics Follow the instructions for camera care givenand your Nikon F will always be ready for superlative picture taking situation Nomenclature ZH 28 29 Depth of field preview button Press to preview how much background or foreground is in or out of focus Black dot For alignment with the black dot on the lens barrel when removing the lens Lens release button Unlocks the lens for removing or changing lenses Flash terminal Accepts synchro cord for electronic flash or flash units other than Nikon BC 7 Self timer Can be set for picture taking delay up to 10 seconds Mirror lock knob Locks the mirror up out of the way for use with Fisheye Nikkors Finder release button For removing the interchangeable viewEinder and focusing screen Finder eyepiece Permits comfortable viewing of the entire viewfinder screen even for eyeglass wearers Neck strap eyelet Film speed reminder dial Can be set for color or black and white speed
7. N SEIT ZB A tt LL LI I 1 OE 1725 LLL LL N 35mmff35 LLL LL L LLL L A 135mm PI L LLL L L IL g0mmff28 LLL LL L LLL L LI mG 300mm L LLL LLL L LL I sss 6oommff s 6f PY FJI ff op AA 43 sommf35 PY rL LLL tt U SCO 10 09 0000 01 00 08 00 08 0 000 ST EB 00 08 0 0 E ES 20 III LEITET SSC a 0 0 SO ER Ka EE CE LL TL LLL EFFE CSI A CE 58 0 000 E 08 08 LLL a Bas mn gt 018008 08 LL LLL FEF Mes A OS LLL TL LL LET FEL Ks meer Heer SOOO EN i a TPT TT L PEL Flash Synchronization To remove the lens from the camera press down on the lens release button and turn the lens clockwise until the black dot on the lens barrel lines up with the black dot on the front of the camera body The lens will slip off easily To mount a different lens place 1t in position In the camera s bayonet mount alien the black dots and twist the lens barrel counterclockwise until the lens locks into place with a click Note With the 6mm f 5 6 Fisheye Nikkor and 10mm 1 5 6 OP Fisheye Nikkor lenses the mirror must be locked in the up position before mounting Caution A body cap should be placed over the lens opening to protect the interior of the camera whenever the lens is removed for any length of time The lens opening should not be exposed to bright sunlight when the lens is removed especially when the camera is loaded with film When the lens is handled or stored separately front and rear lens cap
8. e scratchino the film onide rails hv the nressure nlate when renlacino the camera hack withont a roll of Frame Counter and Film Load Reminder The frame counter located in the hub of the film advance lever shows the number of frames which have been exposed It resets itself automatically to two frames before zero when the camera back is removed There are red indicators for numbers 0 20 and 36 and the frame counter stops at the 36 mark The filmload reminder opposite the frame counter is set manually by means of an indicator pin to serve as a reminder of the number of exposures on the film in the camera Film Speed Reminder Dial The film speed reminder dial is located on the camera baseplate It can be set manually to indicate the type of film color or blackand white and ASA rating of the film loaded in the camera E represents empty Film Plane Indicator The exact position of the film plane can be determined by picturing an imaginary line drawn along the top edge of the digits which make up the camera serial number This is important to know when measuring the film to subject distance especially in close ups and macrophotography HFilm Advance Lever The film advance lever advances the film cocks the shutter and operates the frame counter with a single stroke of 136 or with a series of short strokes A built in safety device prevents the shutter from being ret leased until it is fully cocked The lever is designed s
9. en changing the focusing screen be careful not to touch the surfaces with the fingers as this will result in greasy marks When removing the screen it is advisable to place a clean dry cloth over the palm of the hand for the screen to drop onto Note The optical formula of the Type A screen requires the use of an aperture greater than f 4 5 for focusing with the spht Image rangefinder At smaller aperturesinsufficient light will reach the eye and one half of the rangefinder spot will be blackened out depending on the position of the eye Focusing with Type A screen should always be done at maximum aper sure The problem of blackout also occurs when the lens mount s extended considerably for close up photography Interchangeable Focusing Screens for the Nikon F Type A L Type A Matte Fresnel field with 3mmgecircular split image I rangefinder spot and 12mmg circle Rapid and accurate focusing Excellent for general photography Type L Same as Type A screen but with split mage rangefinder line at a 45 angle Best for subjects with horizontal lines Matte Fresnel field with 12mmg finegroudd matte focusing spot in the center Good for general photography especially with long telephoto lenses Fine ground matte field with 4mm p clear spot and cross hair reticle For photon icro graphy astrophotography and other highmagnification applications and for parallax focusing Type D Overall fine ground matte field For specia
10. ental triggering If you decide not to use the self timer after 1t has already been cocked use the shutter release button to make the exposure Then shut off the self timer before advancing the film for f mel the next exposure by pressing the release U Ni button This way you can avoid wasted exposures It is also helpful for minimizing camera shake at slow shutter speeds with the camera hand held or tripod mounted Infrared picture taking In infrared photography the plane of sharpest image is slightly more distant than the one produced by visible light and seen by the naked eye through the viewfinder To compensate for the shTh in focus Nikkor lenses have a red dot or line engraved on the lens barrel near the color coded depth of field index scale on top of the lens After focusing the image sharply through the viewfinder turn the focusing ring to the left until the red dot lines up with the prefocused distance For example in the picture below the 50mm f 1 4 lens has been focused at infinity 00 The focusing ring is turned slightly to the left so that the infinity marking appears in line with the red dot When a lens having a focal length of 50mm or less normal or wideangle is used at an aperture of 1 8 or smaller no adjustment is i necessary The lens has sufficient depth offield at such small 1 apertures to compensate for the shift in focus Intentional double exposures can be made with
11. espond to different f numbers which are engraved in corresponding colors With the lens focused on a subject and set for a preselected aperture depth of field can be read from the distance scale For example with the 50mm f 1 4 lens focused at 15 feet 4 5m and used at a taking aperture of f 16 depth of field extends from approximately 8 feet 2 4m to infinity caution Do not release the shutter while the depth of field preview hutton is held down as this may Setting the aperture To preset the lens aperture turn the knurled aperture ring on the lens barrel until the desired f number lines up with the black dot in the top center of the milled ring The diaphragm can also be preset for intermediate apertures between the click stopped markings How to hold the camera The camera must be held correctly for best results since even the slightest camera shake at the moment of exposure will result in an appreciable loss of sharpness Photos show the best way to hold the camera for rocksteady picture taking Wrap the fingers of the right hand around the camera body so that the index finger rests comfortably on the shutter release button and the thumb fits between the body and film advance lever so 1t can stroke the lever without removing the eye from the viewfinder Cradle the camera in the left hand for additional support with the left thumb and index finger grasping the focusing ring The camera may be switched from horizontal t
12. f a lens hood is recommended at all times to prevent extraneous light from striking the lens surface and causing flare or ghost and as an added measure of protection against damage to the lens Nikon lens hoods come in four types depending on the lens Screw In Snap On Slip On and Builtln They are calculated precisely for each focal length Nikkor lens to provide maximum protection against stray light To attach or remove the snap on lens hood simply depress the buttons on either side of the hood It will also fit directly over a screw in filter so both can be used on a lens at the same time When not in use the snapon hood can be reversed for storage on the lens and the lens and its hood can be stored together in the eveready case mA ccessories Filters Nikon filters are made of optical glass ground and polished so that both surfaces are optically flat and parallel Nikkor lenses and Nikon filters are made for each other For best results use Nikon filters on Nikkor lenses Nikon filters are available in both screw in and series mounts depending on the type of lens Since filters cut down on the light passing through the lens some increase In exposure time or in lens opening is necessary to compensate for the loss of light This increase 1s expressed as a filter factor For example if the filter factor 1s 2 double the exposure time or open up the lens one full stop Filter factors depend on the light source and type of fi
13. harp focus It extends a greater distance behind the subject in focus than in front Depth of field depends on three factors focal length of the lens lens to subject distance and taking aperture The smaller the aperture and the shorter the focal length of the lens the greater the depth of field for example wideangle lenses have more depth of field than telephotos Also the closer the subject the smaller the depth of field These three factors can be adjusted independently or in combination to give the photographer creative control over the final picture By stopping down the lens only the depth of field can be increased as illustrated by the following three photographs l Lens at 1 4 Small depth of field with only main subject in focus 3 Lens at smallest aperture Creat depth of field with subject background and foreground in focus AA on Ho ima H a k Using the Depth of Field Preview Button The depth of field at taking aperture can be seen by depressing the depth of field preview button located on the front of the camera When the button is pressed the diaphragm closes down to the preselected taking aperture and the exact conditions of taking aperture and allows you to see how much background or foreground is in or out of focus Depth of field can also be determined by referring to the color coded scale printed on the lens barrel The colored lines on either side of the main index mark black arrow corr
14. in height 98mm 3 86 in thickness 56mm 2 2 in without lens Weight body without lens 685g 1 5 lbs with 50mm f 1 4 lens 1 010g 2 2 lbs Credit This manual is converted by Mr Lye With permission from Shiro Malaysia Malayalan internat Home Photography in Malaysia Rosourcos
15. later dust will find its way onto and under the ocusing screen Keep its surface clean using a fine dust brush designed for photographic lenses If fingerprints or greasy marks do get onto the screen blow gently on the surface and wipe away the marks carefully with photographic lens tissue The rear surface of the screen is made of acryl resin Special care should be taken to protect it from scratching or excessive pressure The chart at right has been prepared to assist you in choosing the right screen for the lens to be used Especially recommended The image is uniformly bright from edge to edge However with lenses marked focusing must be done on the surrounding matte area because the central split image microprism or cross hair area cannot be used for focusing due to image darkening Type A L C J and K screens Acceptable In actual use these screens present little obstruction although the viewfield over the entire area 1s less satisfactory because of slight vignetting or moire phenomenon in the case of microprisms Of course these drawbacks have no effect on the image recorded on film Combinations represented by a blank space are unusable because of image darkening or considerable moire over the screen area Type of screen Lens A L E G1 G2 G3 G4 H1 H2 H3 H4 J K M A E AE fes 0 LLL tt A LL 1 tet Wideangle 72 SSH Eee pot sommf2 TIT tt tt L LI 1 Sommfe A L LIL tt ttt I mmf
16. lized close up photography and for use with long focal length lenses Matte Fresnel field with 12mmp fineground matte spot and etched horizontal and vertical lines Ideal for architectural photography Clear Fresnel field with extra bright 12mm microprism focusing spot for viewing and focusing in poor light Four models G1G4 are available corresponding to specific focal length lenses Depth of field cannot be observed Clear Fresnel field with microprism focusing pattern over the entire screen area Permits rapid focusing on any part of the screen with optimum edge to edge brightness in poor light Available in four models H1 H4 corresponding to particular focal length lenses Matte Fresnel field with central microprism focusing spot and 12mm circle Good for general photography Combination of Type A and J screens Matte Fresnel field with 3mm split image rangefinder spot surrounded by Imm microprism doughnut Rapid and accurate focus g for subjects with both straight lines and ill defined contours Suitable for general photography Fine ground Fresnel field with 5 5mm clear spot and double Type M crosshair for use in parallax focusing on aerial image plus micrometer scales for calculation of individual magnification of m objects or for measuring objects Brilliant image in dim light Suitable for close ups photomicrography and other I high maenification applications HFocusing Screen Chart Caution Sooner or
17. lm The chart at right shows the filter factors No exposure compensation is necessary with the Photomic FTN finder The built in meter reads only the light passing through the lens and therefore compensates automatically for loss of light Light Medium Black and white film Light Deep Black and white and color films Light A2 Deep Al2 Color film B2 Medium B8 Deep B12 Note If you wish to leave a filter on the lens to protect 1t against accidental damage the use of the L37 filter Is recommended If the lens is pointed toward the sun or toward a very bright light at n 2rkt it is best to remove any filter including the L37 since light reflected from the filter surface may form ghost images on the film a HAccessories Finder Eyecup The finder eyecup screws directly onto the finder eyepiece to prevent extraneous l ght from entering the viewfinder i Accessories Eyepiece Correction Lenses Eyepiece correction lenses are designed to permit near sighted or far sighted users to view and focus without their glasses They screw directly into the rear of the viewfinder Available in nine diopters 2 3 4 5 O 0 5 1 2 and 3 each representing the combined dioptry of the lens and the 1 diopter of the finder Camera care Good camera care 1s primarily common sense care Treat your Nikon F as you would any valuable precision instrument and it will last a lifetime Although the
18. n be used to prefocus to a measured or estimated distance Aperture indicator dot When lined up with the f numbers engraved on the aperture ring shows the taking aperture at which the exposure will be made Lens aperture ring Used to set the lens diaphragm at the desired f number Slotted couoling prong For coupling diaphragm to exposure meter Contents Nomenclature Foreword Loading the Camera e Unloading e Frame Counter and Film Load Reminder e Film Speed Reminder Dial e Film Plane Indicator e Film Advance Lever Selecting the Shutter Speed Setting the Aperture e Aperture and Depth of Field e Using the Depth of Field Preview Button How to Hold the Camera Focusing Changing the Viewfinder Changing the Focusing Screen e Interchangeable Focusing Screens for the Nikon F e Focusing Screen Selector Chart Changing the Lens Locking Up the Mirror Flash Synchronization Using Self Timer Infrared Picture Taking Double Exposures Accessories e Lens Hoods e Filters e Finder Eyecup e Eyepiece Correction Lenses Camera Care The Nikon Warranty Nikon F Features Specifications Loading the camera Turn the lock on the camera baseplate to the open position as shown by the arrow Slide the one piece baseplate and camera back downward and off Drop a film cartridge or loaded cassette into the film chamber so that the notched end of the rewind knob engages the cassette or J cartridge Insert the end of the film
19. o vertical format in this position The Nikon F 1s the camera which records on film exactly what you see through the viewfinder The eyepiece permits comfortable viewing of the entire screen even for eyeglass wearers There are seventeen different focusing screens to fit any combination of lens and picture takingrequirements see pages 21 23 The Type A focusing screen 1s furnished as standard equipment with the Nikon F This screen has a 3mm circular split image rangefinder in the center for quick and accurate focusing If the image seen in the circle is in focus it will appear continuous When the subject is out of isons the ns image will appear split Into two parts Turn the focusing ring until the two halves of the rangefinder image coincide to form a single sharp image Focusing can also be done by setting the distance scale on the lens barrel for the lensto subject distance as measured or estimated This 1s especially useful when the camera must be prefocused to capture an elusive subject Focusing is always done at full aperture with Nikkor Auto lenses This ensures a bright clear finder image for accurate focusing viewing and framing It also minimizes depth of field so the image snaps in or out of focus distinctly In focus Out of focus Changing the viewfinder Five interchangeable viewfinders are available for the Nikon F Eye Level Waist Level 6X Focusing Action and Photomic FTN The
20. o that it springs back when released but does not strike the camera body A 15 angle of clearance allows the thumb to be inserted for easy comfortable film advancing The lever folds flat on top of the camera for storage in the eveready case Selecting the shutter speed The numbers on the shutter speed dial stand for fractions of a second 125 represents 1 125 second and so forth At the B Bulb setting the shutter remains open as long as the shutter release button 1s held down The Nikon F also has a T Time setting at this setting the shutter will remain open until 1t 1s closed manually by rotating the shutter speed dial one click stop In either direction To set the shutter speed turn the 7 shutter speed dial until the desired number clicks into E position opposite the black dot to the left of the shutter speed dial between the dial and the viewfinder The dial is clickstopped to rotate a full 360 in either direction before or after the shutter is cocked The shutter release button is threaded to accept the Nikon cable release In the center of the shutter speed dial beneath a transparent window is a small black dot which indicates whether or not the shutter 1s cocked in the cocked position the dot lines up with the shutter speed in use When the shutter 1s released the dot returns to the 7 o clock position A pin on top of the shutter speed dial permits direct coupling with the Photomicseries
21. s from ASA 25 1600 as a reminder of the type of film loaded in the camera Tripod socket Threaded to accept standard tripod screw Lock For removing and replacing camera back Frame counter Indicates the number of frames exposed Film load reminder Can be set to show whether film loaded is a 20 or 36 exposure roll Film advance lever Advances the film cocks the shutter and operates the frame counter Shutter release button With screw thread for cable release A R ring Sets for film advance A and rewind R Synch selector ring For flash synchronization control Sets the camera s synchronization mechanism to match the type of flashbulb and shutter speed Synch selector Has color coded markings for setting the correct flash synchronization Shutter speed dial For setting shutter speed from 1 1000 to 1 second plus B and T Eye level pentaprism viewfinder For comfortable easy viewing composing and focusing Accessory shoe Accepts the Nikon Flash Unit BC 7 or Flash Unit Adapter Film rewind crank Handle folds out for smooth effortless film rewinding Flash contact For cordless Flash Unit BC 7 Distance indicator with depth of field scale Arrow points to the focused distance on the distance scale Color coded markings give depth of field for different apertures Focusing ring with distance scale Easy to grip knurled ring for quick accurate focusing Distance scale shows focused distance or ca
22. s should be used to protect the lens surfaces and interior from dust and damage Looking up the mirror The reflex mirror can be locked in the up position out of the optical path for use with the Fisheye Nikkor 6mm f 5 6 and the OP Fisheye Nikkor 10mm f 5 6 whose rear elements protrude into the camera body and interfere with the movement of the mirror Locking up is also necessary for shooting with the Nikon Motor Drive at its top speed of 4 frames per second Turn the mirror lock knob upward so that the black dot on the knob lines up with the red dot on the camera front plate Wind and release the shutter and the mirror will remain locked up To unlock the mirror turn the knob downward until its black dot lines up with the black dot on the body This should be done after releasing the shutter otherwise the mirror will not return to its original position until after an exposure has been made Flash synchronization The Nikon F is designed to synchronize correctly at all shutter speeds except T with various types of flashbulbs and with electronic flash at speeds up to 1 60 second To set the camera for flash lift up and turn the milled synchro selector ring around the shutter speed dial until the desired marking appears in the selector window The table on page 27 shows which marking to use depending on the type of flashbulb and shutter speed used Photomic series finders must be removed e class b
23. to taking a holiday trip or being assigned an important photo job test your camera by making a few trial exposures Remember it takes at least two or three weeks for processing the test film and making any needed repairs or adjustment Follow this important precaution and you will have pictures to remember Nikon F features specifications 35mm single lens reflex camera Negative size 24 x 36mm about 1 x 1 1 2 Interchangeable Eye Level finder with pentapr sm supplied as starrdard equipment Type A interchangeable focusing screen supplied as standard equipment Vibration free automatic instant return mirror with locking up feature Focal plane shutter with titanium foil shutter curtain Shutter speeds from 1 1000 to 1 second plus B and T Built in calibrated self timer can be set for 3 to 10 second delay with markings for 3 and 10 seconds Flash synchronization at any speed except T with flashbulbs and at speeds up to 1 60 second with electronic flash Depth of field preview button Nikon F bayonet type lens mount Self resetting frame counter Single stroke film advance lever winds the film cocks the shutter and operates the frame counter Film rewind crank folds flat when not in use Detachable camera back is interchangeable with Nikon Motor Drive backs Fixed take up spool Tripod socket on the baseplate Film speed reminder dial can be set for color or black and white ASA rating from ASA 23 1600 Dimensions width 147mm 5 79
24. ulbs select the color N ki Ss al corresponding colored a a ler 3 should be set at FX for electronic flash The Nikon Flash Unit adapter must first be slipped into place over the rewind crank and prior to this step j de When using FP M or MF L achu N of the synchro selector as i ku marking that matches the Y numbers on the shutter k WI K yy Y speed dial The selector BC 7 fits directly over the rewind crank and requires no synchronizing cord For other flash units the Nikon flash unit the synchro cord plugged into the synchro terminal on the edge of the camera Note Electronic flash units having no firing delay can be used at A speeds of 1 60 second or slower For units having firing delay the shutter speed dial should be set at 1 30 second or slower Flashbulbs designated B are for use with daylight type color film AAA Flashbulb FP class M class I lt as X class Using self timer The self timer trips the shutter at any time delay trom 3 to 10 seconds It has white indicator dots for 3 6 and JO second delay and can be set either before or after the shutter is wound To set the self timer turn the lever on the front of the camera body downward for the desired delay The timer s actuated by 1ts own release button located beneath the end of the lever in 1ts uncocked position The lever can be turned back after setting the timer to cover the release button and prevent accid
Download Pdf Manuals
Related Search