Netgear WG302v1 Application Note
Contents
1. NETGEAR Connect with Innovation WG302v2 WAG302v2 DHCP Use and Configuration The WG302v2 WAG302v2 can act as a DHCP server for wireless client The WG302v2 WAG302v2 provides the pre configured TCP IP configuration for wireless clients connected to the access point The WG3802v2 WAG302v2 DHCP server only assigns network information to clients that connect to the access point through security profiles that are on the same VLAN as security profile 1 VLAN 1 is the default VLAN for all security profiles Enabling the DHCP server on the WG302v2 WAG302v2 causes Network Address Translation NAT to be enabled on the access point The WG302v2 WAG302v2 in this case acts similar to a NAT router for the wireless clients who receive their network information from the access point All network traffics from the wireless client designated to the wired network are NAT ed to the access point s LAN IP address As a result the DHCP network wireless network configured in the WG302v2 WAG302v2 DHCP settings must be in a different subnet than the wired network 192 168 0 1 192 168 0 228 WG302v2 WAG302v2 7 SNo Wired device 192 168 0 x 9888 Wireless Clients 192 168 1 2 192 168 2 50 In the above example the wired network where the router and the access point resided is 192 168 0 0 24 When enabling the DHCP server on the WG302v2 WAG302v2 the DHCP network must be in a different subnet than 192 168 0 0 24 In our example we u2. ecific DNS Suffix Description Physical Address Dhep Enabled Autoconfiguration Enabled IP Address Subnet Mask Default Gateway DHCP Server DMS Servers Lease Obtained Lease Expires This is specific for v2 of WG302 and WAG302 WG302v1 and WAG302v1 DHCP server works differently Refer to the reference manuals of WG302v1 and WAG302v1 on how to setup DHCP server on those access points
3. se 192 168 1 0 24 To enable DHCP server on the WG302v2 WAG302v2 go to Advanced gt IP Settings in the access points management interface Select the radio button to enable DHCP server Enter the starting and ending IP Address of the DHCP pool subnet mask gateway IP address primary and secondary DNS server addresses primary and secondary WINS server addresses and lease time Click Apply Advanced IP Settings for Wireless Clients DHCP Server Enable Disable Starting IP Address 192 a iad Ending IP Address 192 168 Subnet Wask 255 255 255 Gateway IP Address 192 168 bo Primary ONS Server PIE Secondary ONS Server al Primarn Wilts Server a Secondary WINS Serer in wal 1 e AA 7 PIII jo WIT a Lease Cancel Wireless clients connect to the WG302v2 WAG302v2 will receive one of the addresses from the DHCP pool However DNS Server address assigned to the wireless client will always be the same address as the default gateway address It was because the WG302v2 WAG302v2 uses DNS proxying The wireless client s DNS requests are sendt to the access point then proxy to the designated DNS Server specified in the DHCP setting c Command Prompt Ethernet adapter Wireless Network Connection 2 Connection sp
Download Pdf Manuals
Related Search