NEC NDA-30016-003 User's Manual
Contents
1. beeen see ee ee CE EORR UR Pp EC d 13 Chapter 4 MAT Assignments 15 Assignment of MSF Function Key ipe E IRR hed 15 AOKC Command Assignment of OAI Key 5 16 AKY1 Command Assignment of Dterm Function 16 Assignment of Free Location 17 ASYD Command Assignment of System 17 Assignment of Numbering Plan to Support Free Location Feature 18 ANPD Command Assignment of Numbering Plan 18 ASPA Command Assignment of Special Access Code 18 ASDT Command Assignment of Station Data 18 NDA 30016 Revision 3 0 Pagei CONTENTS Roamer Installation Guide This Page Left Blank Page ii NDA 30016 Revision 3 0 Roamer Installation Guide FIGURES LIST OF FIGURES Figure Title Page 1 1 instalation PABEHIFEXITIGTHS 444 aedi ad dk Rr 3 4 1 OAI Function Key Assignment 3 caasa re Ed 18 4 2 OAI Function Key Assignment 17 NDA 30016 Revision 3 0 Page iii FIGURES Roamer Installation Guide This Page Left Bla2. User Defined 1 3 The number of Roamer D function key LED This number must correspond to the function key assigned to Roamer at the NEAX MAT For more information see Chapter 4 MAT Assignments on page 15 User Defined 2 The default Route Restriction Class value User Defined 3 Y es implement the Name Display feature N 0 do not implement the Name Display feature and only display phone numbers User Defined 4 The way the privilege level is determined when there is more than one user assigned to a using the following characters H Highest Priority level among assigned users e L Lowest priority level among assigned users e R Mostrecently added user privilege level User Defined 5 Y es Roamer is to reset all logical numbers to their home numbers at the designated Reset Time N o Roamer is not to reset the logical numbers daily See User Defined 6 User Defined 6 3 00 The Reset Time on a 24 hour clock at which all logical numbers are reset daily to their home numbers This entry is valid only if User Defined 5 is set to Y es NDA 30016 Revision 3 0 Page 9 Application Configuration Parameter Entry Roamer Installation Guide Description User Defined 7 The number of 30 minute intervals that the backup file will remain valid after a power failure The largest allowable value is 48 24 ho
3. with a kind of service In ASPA assign the logical and physical number s from ANPD to STN Station Number Level Use the tenant number configured for Roamer and the same connection status index that was used in ANPD Finally this command is used to associate each physical station number from ANPD to the actual D or station Line Equipment Number LENS and telephone class Again use the same tenant number Note Now that MAT assignments for logical and physical numbers are complete and correspond to the Roamer database when a telephone user enters a logical num ber the NEAX performs the following processes a It reads the first digit and the total number of digits according to the ANPD assignment b It finds that the first digit is assigned to station service through the ASPA c It checks to see if the Free Location Feature FLF is enabled d If FLF is enabled from its database Roamer provides the physical number associated to that logical number e Then the NEAX reads the ASDT to find out what actual is associated to that physical number and makes the change in assignment Roamer is installed and ready to be initialized Enter the APM Operations Menu and initialize Roamer through the Non CRT Application Control option according to instructions provided in the APM Operations Manual Page 18 NDA 30016 Revision 3 0
4. 4 Process Master Definition File P Master Database File B9 Application Definition File M Application Database 1 Create a Master Definition File This step involves creating the master defini tion file that defines the fields in the master database file 2 Build a Master Database File This step involves entering data that was de fined in the master definition file in Step 1 into the master database fields 3 Create an Application Definition File In this step a definition file is created for the Roamer database This file defines the formats by which data from the corresponding master file is to be converted to meet the needs of Roamer 4 Process the Application Database In this step the Process and Install Appli cation Databases options on the APM Database Administration menu create the file that will be used by Roamer When the Process option is activated data is drawn from the master database and converted to the formats specified in the corresponding application definition file The Install option is then activated to enable Roamer to copy its database into a working file NDA 30016 Revision 3 0 Page 11 Database Requirements Instructions Roamer Installation Guide The information required in all four steps is provided in table below Using this information with the procedural instructions provided in the APM Operations Manual enter the Database Administration option on the APM System Administration M
5. NEC ROAMER AN OPEN APPLICATION INTERFACE OAI INSTALLATION GUIDE NEC America Inc NDA 3001 6 003 Revision 1 0 February 1997 Stock 241735 LIABILITY DISCLAIMER NEC America reserves the right to change the specifications functions or features in this document at any time without notice NEC America has prepared this document for use by its employees and customers The information contained herein is the property of NEC America and shall not be reproduced without prior written approval from NEC America Copyright 1996 NEC America Inc Roamer Installation Guide CONTENTS TABLE OF CONTENTS Page Chapter 1 Introduction bee ieee et ev ewe 1 Chapter 2 Application 5 Step 1 Application el once hA Rr RR 5 Step 2 Primary Configuration Parameters lt s lt cesieeredee ce ee eis vee ee 6 Step 3 ad wees bbe ease 7 Step 4 Secondary OAI Configuration 5 8 Step 5 User Defined 5 9 Chapter Database Requirements 11 SW WCHONE oi oid d REX PORES ab RO COAG ob uo c do CR Re b lp dee c dd 12
6. RT or a communication queue as shown below Note Entries for parameters that are marked with an asterisk should be made ex actly as they are shown All other entries in this guide serve only as examples Parameter Entry Description OAI Application Y N Y Roamer is an OAI application because it communicates with the NEAX2400 using OAI processes CRT Application Y N N No Roamer does not require a terminal screen that is of the same type as the one used by the APM Communication Queue Y N N No Roamer does not need an IPC queue to communicate with other processes NDA 30016 Revision 3 0 Page 5 Application Configuration Roamer Installation Guide Step 2 Primary Configuration Parameters On the APM Configuration Entry screen make the entries shown below to the parameters indicated Note Entries for parameters that are marked with an asterisk should be made ex actly as they are shown All other entries in this guide serve only as examples Parameter Entry Description Application Name Roamer The name to be displayed in the APM menus This name is displayed as it is entered here i e capital letters lower case etc Executable Filename oai app freeloc The path name of the executable file Group no entry Roamer is not a member of a group of applications Response Mode This is a default value since Ro
7. amer does not belong to a group Initialization Batch Roamer is not to be initialized automatically when the OAI system is initialized Termination Mode Roamer is to receive a termination message rather than a kill or termination signal from the APM when it is to terminate Standard Output dev null Roamer s output is sent to this file Number of Restarts Roamer may not be restarted by the APM if it terminates erroneously Page 6 NDA 30016 Revision 3 0 Roamer Installation Guide Application Configuration Step 3 OAI Facilities According to instructions in the APM Operations Manual designate the following NEAX2400 facilities for Roamer using the Facilities command on the Configuration Entry screen Free Location MRFR Mode Release R MRFI Mode Release I MSF OAI Mode Set NTF Number Transfer TCFD Terminal Control D TCFI Terminal Control T Note The same MSF identification number i e from 128 to 192 that is selected in the APM during Step 3 must be assigned to Roamer at the NEAX MAT For more in formation see Chapter 4 MAT Assignments on page 15 NDA 30016 Revision 3 0 Page 7 Application Configuration Step 4 Secondary OAI Configuration Parameters Roamer Installation Guide Using the OAI Conf command on the APM Configuration Entry screen make the entry shown for each of the following parameters required by Roamer Use the instructions prov
8. e information about these system data settings and the MAT commands described below refer to the OAI Module Installation Manual for the NEAX2400 IMS the NEAX2400 IMS Command Manual the NEAX2400 IMS Job Specification Manual and the NEAX2400 IMS Programming Manual Assignment of MSF Function Key Roamer requires MAT assignment of the Mode Set Facility MSF to an OAI assigned function key on all affected by application This process involves assigning the MSF and its Operation Code Op Code configured for Roamer in the APM Application Configuration option to one of the 14 OAI Key Codes The MSF Op Codes range from 128 to 191 These are available for on screen viewing through the Providers command in the APM Application Configuration option Each of the OAI Key Codes corresponds to an AKY1 Function Key Index value which is then assigned to the specific D function key This process is illustrated below PBX Correspondence of AOKC AKYI OAI Function Key Codes Key Indices APM MAT MAT Application AOKC l D AKYI Configuration Command 2 IE 35 Command 3 lt gt 36 Designation of Assignment of p 4 See Assignment of Facility Type an OAI Key Code 5 lt gt 38 Corresponding and its Op Code between 1 and 14 6 UNS 39 MAT Function for Use by to the Same d Key Index to a Roamer Facility Type specific D and Op Code 8 Sc M 41 Function Key 9 m 42 10 l
9. enu and build the Roamer database Any messages displayed during these steps are discussed in the Process and Error Messages chapter of the APM Operations Manual The Roamer definition and database files must contain the information in the table below Name the master definition file roamer m and the application definition file roamerdb Master Definition File Application Master Definition File Database FioicDeseripuon Type Size Min Max Data Type Typical Value Value Entry User ID N 10 0 99999 ASCII 598241297 9999 User Name A 16 ASCII Thompson Logical Number N 5 0 99999 Long Integer 201 Exempt from Reset A 2 ASCII n RSC N 2 0 15 Short Integer 1 SFC N 2 0 15 Short Integer 2 Physical Number N 5 0 99999 Long Integer 3200 Tenant Number N 3 0 255 Short Integer 1 Phone Type N 2 0 10 Short Integer 10 Page 12 NDA 30016 Revision 3 0 Roamer Installation Guide Database Requirements Field Definitions User ID A unique 10 digit number that describes each user e g social security number The database is sorted by this field User Name The 16 character user name that is displayed on the ptem Logical Number The station number associated with the user name under Roamer control Exempt from Reset Whether or not Yes or No this user is to be reset to a home phone when all system phones are reset See User Defined Parameters 5 and 6 on page 9 RSC T
10. figuration file Use the instructions provided in the APM Operations Manual to make the entries provided in this section Database Requirements Roamer requires two application databases one of which is constructed and maintained through the APM Database Administration option The process begins with the creation of a master definition file and its related master database An application definition file is constructed which enables the processing of the master files into an application database Chapter 3 of this guide defines the information which must be included in these definition and database files Use the instructions provided in the APM Operations Manual to make the entries contained in this section Mat Assignments Several data settings must be assigned at the NEAX Maintenance Administration Terminal MAT before Roamer will function Chapter 4 of this guide specifies the necessary commands and the values at which they are to be set Use the instructions provided in the VEAX2400 IMS System Manuals to make the entries contained in this section NDA 30016 Revision 3 0 Page 1 Introduction Roamer Installation Guide A Note About the Logical and Physical Numbers Used By Roamer Roamer uses logical and physical numbers to move users from one phone to another A physical number e g 4502 is the actual extension associated to a D or station through the NEAX2400 MAT A logical number e g 202 is an arbitrary number t
11. hat is associated to a telephone user and that is controlled by the Open Application Interface OAI Physical numbers are not moved Logical numbers move with the user Thus when a user indicates a move Roamer finds the user s logical number and reassigns it to the physical number of the new telephone During installation a logical number and a home physical number are assigned to each user in the Roamer database Assignments are made at the NEAX2400 MAT which associates those physical numbers to specific D ns These two sets of numbers can be the same or different If they are different and OAI processing is interrupted Roamer may lose access to the physical numbers since OAI relocates users by their logical numbers If the two numbering systems are the same and OAI processing is interrupted all users can be restored to their physical home phone numbers by disabling the Free Location Feature through the NEAX2400 MAT The installation process including its presentation in this manual and reference to other manuals that you need to complete installation is illustrated in Figure 1 1 on page 3 Page 2 NDA 30016 Revision 3 0 Roamer Installation Guide Discussed in chapter ROAMER INSTALLATION REQUIREMENTS Introduction Instructions in Chapter 1 Software Installation APM Installation Software Release Media Manual Chapter 2 APM Operations Manual Application Configuration Application Characteristics Primar
12. he Route Restriction Class assignment of the user SFC The Service Feature Class assignment of the user Physical Number The station number associated with the phone under NEAX control Tenant Number The number of the tenant to which this physical number is assigned See Tenant Number on page 8 Phone Type The equipment type of this phone To indicate V this field must be set to 10 Note 1 7o enter an unassigned physical number into the database list it under a User ID that is not associated with a user name and leave the Logical Number Exempt from Reset RSC and SFC fields blank A user can be entered to the database without a phone assignment by leaving the Physical Number Tenant Number and Phone Type fields blank e g security staff who are mobile and not assigned to a home phone Note 2 Remember to complete Step 4 Process the Application Database after entering the information above NDA 30016 Revision 3 0 Page 13 Database Requirements Roamer Installation Guide This Page Left Blank Page 14 NDA 30016 Revision 3 0 Roamer Installation Guide MAT Assignments Chapter 4 Assignments This guide assumes that data settings that affect the operation of all OAI software on a system wide basis have already been assigned on the NEAX Maintenance Administration Terminal MAT Such settings include system index values and assignment of Interface I O Port Data in the Interface Processor IP For mor
13. ided for this option in the APM Operations Manual Parameter Entry Description Database Name 1 oai db cur roamerdb The path name of the database containing user information The database filename roamerdb shown here with its path should be used as the name of the corresponding Application Definition File For more information see Chapter 3 Database Requirements on page 11 Timeout Value 1 60 The number of seconds Roamer waits for user numeric input before it releases the Timeout Value 2 20 The number of seconds Roamer waits for input of processing symbols such as before it releases the D amp Tenant Number This configuration applies to tenant No 1 Source Link Name OAII X25 The port on the source side of the communication link Entry should correspond to a Link Name in the APM System Configuration file Destination Link Name PBX1X25 The port on the destination side of the communication link Association Recovery 10 The number of seconds Roamer waits before trying to re establish an association with the NEAX that has been released Page 8 NDA 30016 Revision 3 0 Roamer Installation Guide Step 5 User Defined Parameters Application Configuration Make the following additional parameter entries through the UserDefined command on the APM Configuration Entry screen Parameter Entry Description
14. ned OAI Key Code This command must be used to assign the function key on each ptem that is to be set up with access to Roamer 1 Enter the station number of the Enter the same tenant number that is configured for Roamer in the APM Appli cation Configuration option i e Tenant Number on page 8 D on which the function key is being as signed Enter to the D function key field the MAT Function Key Index that corre sponds to the previously assigned OAI Key Code Page 16 NDA 30016 Revision 3 0 Roamer Installation Guide MAT Assignments APM Application Configuration Roamer configured for MSF 129 PBX Correspondence of AOKC Function Key Codes Key Indices MAT MAT AOKC 1 34 AKY1 Function 2 usd 35 Key 3 Command Command 3 Dan hae 36 OAI Key 4 37 M Function Key code 10 given 5 38 Index 443 MSF facility type 6 PES 39 assigned to and term Op Code 129 To lt a gt 4 p j 8 lt gt 4 ey 9 L osi 42 10 47 43 11 S nb 44 12 Q7 EP 45 13 e iv P 46 14 LE 47 Figure 4 2 OAI Function Key Assignment Example In the example illustrated in Figure 4 2 above MSF 129 is configured for Roamer and is assigned through the AOKC command to OAI Key Code 10 OAI Key Code 10 corresponds in the PBX to MAT Function Key Index 43 Each in the system that is to access Roamer has function ke
15. nk Page iv NDA 30016 Revision 3 0 Roamer Installation Guide Introduction Chapter 1 Introduction This guide provides specific field entries that need to be made in the process of installing and configuring Roamer In addition to this guide use the following manuals for this installation Applications Manager APM Installation Manual Contains step by step instructions for installing the software from the release media Applications Manager APM Operations Manual Explains how applications like Roamer are configured in the APM environment using the entries and values provided in this guide NEAX2400 System Manuals Give very detailed explanations about the assignments that need to be made through the Maintenance Administration Terminal MAT commands on the NEAX2400 The installation and set up of Roamer involves the following processes Each of these topics is covered in more detail in the remaining chapters of this book Software Installation Roamer software must first be loaded from the release media Log in to the APM Platform Management Menu select the Installation of Applications Packages option and follow the instructions provided in the APM Installation Manual to complete this part of the installation Application Configuration Roamer is internally supported by the APM and must be configured in the APM environment Chapter 2 of this guide provides the information that must be entered into this APM con
16. t gt 43 11 lt gt 44 12 45 13 qm 46 14 NE 47 Figure 4 1 OAI Function Key Assignment A knowledge of the D stations in the NEAX system and which ones will have access to Roamer is necessary to making the following assignments NDA 30016 Revision 3 0 Page 15 MAT Assignments Roamer Installation Guide AOKC Command Assignment of OAI Key Codes This command is used to associate the MSF facility and its operation code that was configured in the APM for Roamer to one of the 14 OAI Key Codes in the MAT l Select an unused OAI Key Code from 1 to 14 To determine what Key Codes are available for assignment use the LOKC command to list the AOKC Key Codes that are already assigned Enter MSF as the facility to be assigned to the selected Key Code using the val ues on the screen Enter the same Op Code that was configured for Roamer in the APM If neces sary retrieve it using the Providers command on the APM Configuration Entry screen AKY1 Command Assignment of D Function Key This command is used to assign key data on the D 5 that are to have access to Roamer MAT Function Key Indexes 34 to 47 have been designated for use in the OAI system and correspond to the 14 OAI Key Codes as illustrated on the previous page The command is used to assign D function key to the specific MAT Function Key Index that in turn corresponds to the previously assig
17. urs A longer delay must be indicated with the value 0 always valid User Defined 8 oai app data roamerbu The name of the backup file that reflects the current status of assignments This file preserves the current status of the Roamer system in the event of a power failure If no backup is desired leave this field blank User Defined 9 16 The length of the User Name field in the Roamer database This completes the configuration of Roamer in the APM Now go to Chapter 3 Database Requirements on page 11 to create its database support Page 10 NDA 30016 Revision 3 0 Roamer Installation Guide Database Requirements Chapter Database Requirements Roamer uses the following two databases only the first of which is created through the APM Roamer Database This database contains default assignment information Each user ID is associated to telephone numbers and privileges a tenant and a reset option This database is created through the APM and is configured as oai db cur roamerdb The Backup Database This database reflects the current status of Roamer activity and is created and maintained by Roamer It is configured in the APM as oai app data roamerbu The Roamer database is created through the Database Administration option on the APM System Administration Menu and involves the following four step process Step 1 Create Step 2 Build Step 3 Create Step
18. y 3 assigned to MAT Function Key Index 43 via the AKYI command Now for the duration of Roamer s lifetime whenever a phone user presses function key on any assigned D MSF 129 initiates communication with Roamer Assignment of Free Location Feature ASYD Command Assignment of System Data Make the following setting Sys 1 Index 4 bit 4 Enter 1 Yes to enable the Free Location Feature Note fOAI goes down and the logical and physical number sets are the same dis abling this Free Location Feature disables all relocated logical numbers and only physical number assignments are accessible NDA 30016 Revision 3 0 Page 17 MAT Assignments Roamer Installation Guide Assignment of Numbering Plan to Support Free Location Feature ANPD Command Assignment of Numbering Plan Data ASPA Command Assignment of Special Access Code ASDT Command Assignment of Station Data This command is used to assign the actual first digit and the total number of digits for the set of physical numbers and again for the logical numbers For instance if the physical numbers are to be four digits long and lie in the range between 3000 to 3999 the first digit is 3 and the total number of digits is 4 The logical numbers can be the same first digit and total number of digits Remember use the same tenant number that was configured for Roamer This command is then used to associate the first digit assigned through ANPD
19. y Parameter Configuration OAI Facilities Optional OAI Configuration Parameters Optional Parameters Chapter 3 APM Operations Database Requirements Manual Master Definition File Master Database File Application Definition File Application Database Chapter 4 NEAX2400 IMS NEAX2400 IMS System Manuals Maintenance Administration Terminal MAT Assignments AOKC Assignment of OAI Key Codes Assignment of Function Key Figure 1 1 Installation Requirements NDA 30016 Revision 3 0 Page 3 Introduction Roamer Installation Guide This Page Left Blank Page 4 NDA 30016 Revision 3 0 Roamer Installation Guide Application Configuration Chapter 2 Application Configuration Roamer is configured into the APM system using the Add function of the Application Configuration option on the APM System Administration menu 1 Enter the APM option from the APM Platform Management Menu 2 Enter the System Administrator password at the APM password screen 3 Enter the Application Configuration option from the System Administration menu This section contains the information that should be entered to the configuration file for Roamer For specific instructions on what these parameters mean and how to make these entries use the APM Operations Manual Step 1 Application Characteristics In adding Roamer to the APM Application Configuration file define it as an OAI application that does not need a C
Download Pdf Manuals
Related Search