Navman M300 User's Manual
Contents
1. Speed mode shows distance and speed Speed AVG mode shows distance and average speed Speed MAX mode shows distance and maximum speed Odometer mode shows total distance from last odometer reset Heading mode shows current heading in degrees from true North Clock mode shows current time and date GPS time is displayed unless you set local time see Section 4 1 5 Timer mode shows session and lap times Timer recall mode recalls stored session and lap times See glossary 1 16 M300 NAVMAN M300 Normal operation LY 5 1 1 Speed mode This mode lets you monitor session distance and current speed session distance current speed ui Xu Ce kno To access this mode If necessary press to turn the power on and start normal operation Press repeatedly until the screen appears as shown above While in Speed mode e Press to store current lap data the screen briefly shows the lap distance lap number and lap time that is being stored e Press and hold to clear all session data Does not clear odometer e Press to go to the next mode 5 1 2 Speed Average mode This mode lets you monitor session distance and average speed session distance average speed 416094 nots 9 AVG Z To access this mode If necessary press to turn the power on and start normal operation Press repeatedly until the screen appears as shown above2. to start editing setting status flashes 2 Press or to select On or OFF 3 Press to stop editing 4 Press to go to the next option or hold to leave setup 4 1 4 Set speed units Set units for speed knots km h or mph SEL ures nmi knots A SYSTEM speed units Access this option If necessary press and hold to turn the power on and enter setup Press repeatedly until the screen appears as shown above To set speed units 1 Press to start editing speed units flash 2 Press or to select knots km h or mph 3 Press to stop editing 4 Press to go to the next option or hold to leave setup Note Distance is displayed in units that correspond to user selected speed units For example if you select speed units km h then distance is displayed in km M300 1 13 ES 11300 setup NAVMAN 4 1 5 Set offset set local time This option lets you adjust the M300 to display local time You only need to do this once unless operating the unit in anew time zone By default the M300 displays GPS time The M300 will perform all functions accurately without adjusting the offset to display your local time Note If you attempt to change the time offset before all GPS data are obtained the screen displays no GPS and the antenna icon flashes until all GPS data are received SYSTEM SET Access this option If necessary press and ho
3. While in Speed average mode e Press to store current lap data the screen briefly shows the lap distance lap number and lap time that is being stored e Press and hold to clear all session data Does not clear odometer e Press to go to the next mode M300 1 17 EN 11300 Normal operation NAVMAN 5 1 3 Speed Maximum mode This mode lets you monitor session distance and maximum speed session distance maximum speed Access this mode If necessary press to turn the power on and start normal operation Press repeatedly until the screen appears as shown above While in Speed maximum mode Press to store current lap data the screen briefly shows the lap distance lap number and lap time that is being stored e Press and hold to clear maximum speed only e Press to go to the next mode 5 1 4 Odometer mode This mode shows total distance since odometer was last reset total distance 8405 3 EI Access this mode If necessary press to turn the power on and start normal operation Press repeatedly until the screen appears as shown above While in Odometer mode e Press to store current lap data the screen briefly shows the lap distance lap number and lap time that is being stored e Press and hold to clear odometer only Press to go to the next mode Note The M300 displays distance in units corresponding to speed units see s
4. to perform a controlled shutdown When battery power becomes too low to continue operation a controlled shutdown is automatically executed current data is saved M300 1 7 ES 1300 Interface NAVMAN 2 0 Navman M300 interface 2 1 Button functions OJO There are two control buttons and These buttons are pressed separately or together to turn the unit on and off cycle through modes and select mode options Throughout this guide the button icons are used as follows press this button press this button press both buttons together Note where it is required to press and HOLD buttons a countdown begins To perform the required action continue to hold until the counter reaches zero if you release the button sooner the action will not be performed 2 2 Display screen kmminmiPM pone SYSTEM Root AVG BIN OSE The illustration above shows the complete display capability of the M300 Only a sub set of these elements appear at any time during operation The upper screen section displays the antenna amp and battery KR icons as well as all values and units The lower screen section displays the mode icons and the setup icon System Set Mode Icons Clock Speed Average ave Timer O Speed Maximum 7qmax Timer recall Orou Odometer 8 7 3 Speed 32 Heading e 1 8 M300 NAVMAN M300 Getting started ZY 3 0 Getting started 3 1 Be outdoors The M300 i
5. 1 20 M300 NAVMAN M300 Normal operation LY 5 1 7 Timer mode Timer mode lets you monitor session time lap number and current lap time Up to 50 laps may be stored during each session Each lap entry resets the current lap time to zero lap number session time lap time een Y LAP iR 35300 0 15 Access this mode If necessary press to turn the power on and start normal operation Press repeatedly until the screen appears as shown above ow wn While in Timer mode e Press to store current lap data the screen briefly shows the lap distance lap number and lap time that is being stored e Press and hold to clear all session data Does not clear odometer e Press to go to the next mode Note The timer starts automatically whenever you start moving and stops whenever you stop moving 5 1 8 Timer recall mode This mode lets you recall stored lap data la ca lap distance P Er time Y LAP x i ee uo ico RcL Access this mode If necessary press to turn the power on and start normal operation Press repeatedly until the screen appears as shown above While in Timer recall mode e press repeatedly to step through lap data e press to start recall again from lap 1 e press to go to the next mode M300 1 21 EN 11300 Normal operation NAVMAN 5 1 9 Mode operation overview modes operating details gt store current lap d
6. 4 0 To leave setup Press and hold to leave setup and start normal operation counter LERUE I SELUP When the counter reaches zero the M300 will leave setup and start normal operation in Speed mode If you release before the counter reaches zero the M300 will remain in setup Note you must leave setup first if you want to turn the power off 3 3 2 Start normal operation To start normal operation Press to turn the power on and start normal operation When starting directly into normal operation the M300 will start in the mode it was in at last shutdown Speed mode is always displayed first when starting normal operation after leaving setup For details about normal operating modes see Section 5 0 1 10 M300 NAVMAN M300 Setup ZI 4 0 Setup 4 1 Setting options Press and hold to turn the power on and enter setup Press repeatedly to step through the setting options Setting options are accessed in the order shown below See subsequent sections for details about editing settings Grm Gaara iss Set 12hr lets you set 12hr or 24hr time format Set 31 12 lets you set dd mm or mm dd date format Beep When beep is ON a beep will sound when the buttons are pushed Set units knots lets you set the speed units to knots km h or mph Set offset set local time lets you adjust the M300 to display local time Press and hold to leave setup and start normal o
7. LL NAVMAN HAVE ANY LIABILITY FOR ANY INCIDENTAL CONSEQUENTIAL PUNITIVE OR OTHER DAMAGES EVEN IF IT IS AWARE OF THE POSSIBILITY OF SUCH DAMAGES SOME STATES AND COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU NAVMAN WILL NOT BE LIABLE FOR ANY LOSS OF DATA ANY IMPLIED WARRANTIES WILL ONLY LAST FOR THE PERIOD STATED IN THE ACCOMPANYING LIMITED WARRANTY SOME STATES AND COUNTRIES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE WARRANTY PERIOD MAY NOT APPLY TO YOU Each of these disclaimers is in addition to and does not reduce the effect of any other disclaimer No dealer has the authority to change this warranty No event that voids any warranty of the Product will have any effect on these disclaimers or limitations of liability This disclaimer will be construed under the laws of New Zealand without regard for any conflict of law rules Navman has taken care to ensure the information in this document is accurate However Navman assumes no responsibility for errors or omissions in the content of this document and no warranty of accuracy is expressed or implied As Navman is continuously improving this Product Navman may make changes to the Product at any time which may not be reflected in this document Please contact your nearest Navman office if you require any further assistance Navman is a registered trade mark of Navman NZ
8. Limited M300 1 25 O NAVMAN 1 26 M300
9. NAVMAN English Deutsch Francaise Italiano Espana Portugu s M300 5 1 6 1 1 1 M300 NAVMAN NAVMAN M300 English ZI M300 USER GUIDE English M300 1 3 N Welcome NAVMAN Welcome Navman s 300 series GPS Sport Tools provide an affordable and reliable way to track and store a variety of personal performance indicators Please read this guide carefully and familiarize yourself with the interface and functions as well as the intended use and limitations of the Navman M300 GPS Sport Tool This product complies with CE FCC Canada 210 and C Tick regulations Operation is subject to the following two conditions 1 this device may not cause interference 2 this device must accept any interference including interference that may cause undesired operation of the device WARNING Entering information or handling the Navman Sport Tool while moving is unsafe and may cause you to be distracted or fail to observe safe practices necessary to avoid death serious injury collisions or accidents to you or others Use the memory functions to review data when you are not moving CAUTION The Navman M300 GPS Sport Tool is intended for recreational use only Do not use this product for obtaining measurements that require professional or industrial precision Consult your physician before starting or changing any exercise programs 1 4 M300 NAVMAN Content 1 0 General information 1 1 Che
10. ata if clear all session data a store current lap data AVG Speed AVG _Jop clear all session data store current lap data m peed clear max speed only Y store current lap data Sue ente lear odometer only w ae current lap da store current lap data Glock 5 5 5 clear all session data ooe Regie current lap data me clear all session data gt recall lap data O restart recall from lap 1 does not clear odometer KEY press this button press this button press both buttons together press and hold both buttons together 1 22 M300 NAVMAN M300 Default settings ZY 6 0 Restoring default settings I WARNING Restoring factory default settings clears a all stored data and all user selected settings To restore all default factory settings 1 make sure the unit is off 2 press and hold to turn the unit on DO NOT RELEASE 3 while holding press five times es ae cco n N cock iLL Cc When restoring default settings The screen displays the message reset all and a counter If you stop any time down to 1 on the counter default settings will not be restored and all current settings and data will not be cleared After pressing the fifth time the reset done message appears and all settings are restored to factory defaults A controlled shutdown is exec
11. cklist 1 2 Care and maintenance 1 3 Water resistance 1 4 Changing the battery 2 0 Navman M300 interface 2 1 Button functions 2 2 Display screen 3 0 Getting started 3 1 Be outdoors 3 2 Fit the M300 3 3 Startup 3 3 1 Enter setup 3 3 2 Start normal operation 4 0 Setup 4 1 Setting options 4 1 1 Set time format 4 1 2 Set date format 4 1 3 Beep 4 1 4 Set speed units 4 1 5 Set offset set local time 4 1 6 Editing settings overview 5 0 Normal operation 5 1 Modes 5 1 1 Speed mode 5 1 2 Speed Average mode 5 1 3 Speed Maximum mode 5 1 4 Odometer mode 5 1 5 Heading mode 5 1 6 Clock mode 5 1 7 Timer mode 5 1 8 Timer recall mode 5 1 9 Mode operation overview 6 0 Restoring default settings 7 0 Glossary 8 0 Copyright M300 Content ZY ok ok ak kek 1 N99 9 O MO ML LL LL LL AL LL LALA AL LL AAG ARAON 0 0 0 _NNOQD Gi VI DS VW INN 090 00 00 00 DNDODDI AAA LA AAA d d d d d d dAAdAAd dA LL 9 0 Additional warnings disclaimers and limitations on liability M300 1 25 1 5 N M300 General information NAVMAN 1 0 General information 1 1 Checklist The M300 package should contain the following items e Navman M300 GPS Sport Tool e armband e quick guide e user guide e 1 x AA battery e registration card 1 2 Care and maintenance Do not attempt to disassemble the M300 there are no user serviceable components in this product The M300 is of robust design However care should be taken to protect
12. ection 4 1 4 1 18 M300 NAVMAN M300 Normal operation LY 5 1 5 Heading mode This mode shows the current heading in degrees from true North current ae sele G Access this mode If necessary press to turn the power on and start normal operation Press repeatedly until the screen appears as shown above While in Heading mode e Press to store current lap data the screen briefly shows the lap distance lap number and lap time that is being stored e Press to go to the next mode M300 1 19 EN 11300 Normal operation NAVMAN 5 1 6 Clock mode Clock mode shows the current time and date Time is only displayed while GPS satellite signals are available By default GPS time is displayed See section 4 1 5 for instructions on setting local time current time current date na 2 ko i 3 PM Access this mode If necessary press to turn the power on and start normal operation Press repeatedly until the screen appears as shown above While in Clock mode Press to store current lap data the screen briefly shows the lap distance lap number and lap time that is being stored e Press and hold to clear all session data Does not clear odometer e Press to go to the next mode amp 7 095 Note If GPS signals are not yet obtained a no GPS alert is displayed The antenna icon flashes until GPS signals are received
13. from shocks or extreme heat Clean using only a soft cloth with mild soap and warm water Do not use abrasive cleaning materials or products We recommend rinsing the M300 with fresh water after any exposure to salt water CAUTION Please ensure battery cover is in place during cleaning Store the M300 away from direct sunlight or extreme heat sources Remove battery before storing for an extended period 1 3 Water resistance The Navman M300 GPS Sport Tool is water resistant 1 6 M300 NAVMAN M300 General information EM 1 4 Changing the battery Always shut down the M300 before changing the battery Note All system settings and the calculated data that was stored at the last controlled shutdown are retained when the battery is removed This information persists indefinitely until updated or reset 1 Turn D ring anti clockwise and slide enclosure cover down to open battery enclosure 2 Insert battery with end as indicated inside enclosure 3 Replace enclosure cover ensuring lugs at the bottom of the cover are aligned with slots in the enclosure surround turn D ring clockwise to seal For best performance General use K Alkaline Below 5 C NiMH If battery power becomes low during operation the battery icon is displayed na DI pr i e zu _ iz battery a co SI dI 2 gt constant low power KT flashing approx 5 min before automatic shutdown Press and hold
14. ld to turn the power on and enter setup Press repeatedly until the screen appears as shown above To set local time 1 Press to start editing the screen now appears as shown below The current time value flashes The date is displayed to ensure that adjustments are made in the correct direction current time current date 304 SI n 2 2 Press repeatedly to set time display forward press and hold to set time display forward quickly or press repeatedly to set time display backward press and hold to set time display backward quickly 3 Press to stop editing 4 Press to go to the next option or hold to exit setup 1 14 M300 NAVMAN M300 Setup LY 4 1 6 Editing settings overview settings editing details edit set 12h OO h i set 31 12 al OH set 12hr KEY press this button press this button press both buttons together M300 1 15 EN 11300 Normal operation NAVMAN 5 0 Normal operation 5 1 Modes Press to turn the power on and start normal operation Press repeatedly to step through the modes press and hold to cycle through the modes quickly Modes are accessed in the order shown below See subsequent sections for details about using different modes 9 ave EMAX OLE pai Speed AVGH gt Speed MAX gt _Odometer Timer RCL 4 _Timer_ 4 _Clock 4 _Heading lt ret
15. others Entering information or handling the Product while moving is unsafe and may cause you to be distracted or fail to observe safe practices necessary to avoid death serious injury collisions or accidents to you or others The user of this Product is solely responsible for observing safe practices and for following the instructions including but not limited to those instructions relating to the care and use of the Product in the User s Guide this document Failure to follow instructions provided in this document relating to the care and use of the product may cause the product not to perform in its designed potential or specifications or may result in voiding of the warranty Navman NZ Limited Navman neither owns nor maintains the Global Positioning Service GPS Navman assumes no responsibility for the quality or continuity of the GPS service Navman will not accept the return of products where dissatisfaction results from any changes to the GPS service EXCEPT AS SPECIFICALLY STATED IN ANY LIMITED WARRANTY ACCOMPANYING THIS PRODUCT A NAVMAN PROVIDES THE PRODUCT WITH ALL FAULTS B THE ENTIRE RISK AS TO SATISFACTORY QUALITY PERFORMANCE ACCURACY AND EFFORT IS WITH THE PURCHASER AND USER C NAVMAN MAKES NO WARRANTY AGAINST INTERFERENCE WITH ANY PURCHASER S OR USER S ENJOYMENT OF THE PRODUCT OR AGAINST INFRINGEMENT AND D NAVMAN DOES NOT WARRANT THAT THE OPERATION OF THE PRODUCT WILL BE CONTINUOUS OR ERROR FREE IN NO CASE WI
16. peration M300 1 11 ES 11300 setup NAVMAN 4 1 1 Set time format Set 12hr or 24hr time display format Tu To access this option If necessary press and hold to turn the power on and enter setup Press repeatedly until the screen appears as shown above To set time format 1 Press to start editing time format option flashes 2 Press or to select 12hr or 24hr 3 Press to stop editing 4 Press to go to the next option or hold to leave setup time format Et he SYSTEM SET un 4 1 2 Set date format Set dd mm or mm dd date display format date format a Sf Bm SYSTEM SET To access this option If necessary press and hold to turn the power on and enter setup Press repeatedly until the screen appears as shown above To set the date format 1 Press to start editing date format example flashes 2 Press or to select dd mm or mm dd 3 Press to stop editing 4 Press to go to the next option or hold to leave setup 1 12 M300 NAVMAN M300 Setup LY 4 1 3 Beep Set beep ON or beep OFF When beep is ON an audible beep will sound when buttons are pressed status DEEP on SYSTEM SET Access this option If necessary press and hold to turn the power on and enter setup Press repeatedly until the screen appears as shown above To set button beep status 1 Press
17. s not intended for operation indoors or under water as it uses Global Positioning System GPS satellites to get time and date information and to calculate distance and speed For best results always use the M300 outdoors with an unobstructed view of the sky 29 3 2 Fit the M300 The M300 is designed to be worn on the left upper arm The easiest way to fit the unit is to feed the strap through the fastener to create a loose enclosure Then slide your left arm through the enclosure and tighten the strap after the unit is in a comfortable position 3 3 Startup Press and hold to turn the power on and enter setup OR press to turn the power on and start normal operation First start may take up to 80 seconds to get all the satellite data amp Flashing seeking GPS data Constant GPS data obtained Always enter setup first if you wish to change settings I To enter setup after starting normal operation you will E need to shut down and re start the unit M300 1 9 EN M300 Getting started NAVMAN 3 3 1 Enter setup To enter setup Press and hold to turn the power on and enter setup counter CI un z5 When the counter reaches zero the M300 will enter setup If you release before the counter reaches zero the M300 will immediately start normal operation Note To enter setup after starting normal operation you will need to restart the M300 For details about changing settings see Section
18. uted automatically after defaults are restored After factory default settings have been restored when the M300 is next turned on you will need to enter setup if you want to display local time or adjust other setting preferences M300 1 23 ES M300 Glossary NAVMAN 7 0 Glossary Global Positioning System GPS A satellite tracking system Lap A lap is the distance travelled in the time between the current lap entry and the previous lap entry Session A session includes all time that the Sport Tool has been actively operating since first start up or since the session data was last cleared Clearing the session data removes all stored data from the previous session except the odometer value which must be cleared separately 8 0 Copyright This publication and its contents are proprietary to Navman and are intended solely for the use of its clients to obtain information about the operation of Navman Sport Tool products it should not be used or distributed for any other purpose Proprietary information and specifications relating to this document or the Navman Sport Tool products are subject to change without notice 1 24 M300 NAVMAN M300 Warnings and disclaimers EM 9 0 Additional warnings disclaimers and limitations on liability It is the user s sole responsibility to set up and use the Navman GPS Sport Tool the Product in a manner that will not cause accidents personal injury or property damage to you or
Download Pdf Manuals
Related Search