Home

Navman iCN 600series User's Manual

1. You can save backups of your settings Shortcuts and Favorites to your computer To Back up your Settings Shortcuts and Favorites 1 From the File menu click Backup The Backup window will display 2 Click New Backup The New Backup window will display 3 Click OK To Delete a Backup 1 From the File menu click Backup The Backup window will display 2 Select the backup from the list 3 Click Delete To Restore a Backup 1 From the File menu click Restore The Restore window will display 2 Select the backup from the list 3 Click Restore 3 iCN 600 series User Manual 21 Accessories The following accessories are available for your iCN External Antenna Required for vehicles with heated windshields and to boost GPS performance in weak signal areas Memory Card Writer Connects to your computer and allows you to download maps to SD or MMC memory cards Remote Control Button functions are the same as the ICN control buttons You cannot turn on the iCN using the Remote Control Only included with the iCN 635 and 650 Available for the iCN 610 as an accessory 38 iCN 600 series User Manual software Product License NAVMAN THE LICENSOR IS WILLING TO LICENSE THE ICN SmartST SOFTWARE THE SOFTWARE TO YOU THE CUSTOMER ONLY IF YOU ACCEPT ALL THE TERMS OF THIS LICENCE PLEASE READ THE TERMS CAREFULLY BECAUSE USING THIS SOFTWARE WILL BE DEEMED TO BE YOUR ACCEPTANCE THAT YOU ARE USING IT O
2. b any technical support provided by Navman or its approved Service Centres shall make commercially reasonable efforts to solve any problem or issues Some countries states and jurisdictions do not allow limitations on duration of an implied warranty so the above limitation of 90 days may not apply Limitation of Liability To the fullest extent permitted by law Navman will not be liable in any event whether in tort including negligence contract or otherwise for any damage including loss of profits any consequential indirect or special damage loss or injury of any kind suffered by You or any other person Except as expressly set out in this warranty Navman makes no other warranties express or implied including any implied warranties of merchantability and fitness for a particular purpose If any limitation or exclusion or liability contained in this warranty is held to be invalid for any reason and Navman becomes liable for loss or damage that would otherwise have been excluded such liability will be limited to the total amount actually paid by You for the product 39 iCN 600 series User Manual Compliance Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Contact Us Support for Support for New Zealand the US and Canada Navman NZ Ltd Navman USA Limited 13 17
3. Audio Alert check box e To change the units used to measure distance for this POI select the Metric or Imperial option e Select the distance from the POI at which the visual warning should display or the audible chime is heard from the Distance box e Move the POI Visibility Level slider left or right indicate the priority that the POI has where two or more POls are in the same locale e Type the path to the icon file to be used to represent the POI in the Icon File box or select the icon file from your local or network drive clicking L J locating the file and clicking Open The file must be a bitmap BMP graphic with a minimum of 6x6 pixels and a maximum of 32x32 pixels 3 Click OK and follow the prompts The POI file is saved to the ICN e f you want to change the name of the file edit the name for the file in the File Name box of the PO File Name window and click OK The file name can be up to eight characters with no spaces Deleting a Custom POI File from your iCN 1 On the Device menu click Manage POI Files The Manage PO Files window will open displaying a list of custom POI files installed on your iCN 2 Click the File Name or Size of the POI file to delete 3 Click Delete The file is removed from the list but is not yet deleted 4 If you want to delete more than one file go to step 2 5 Click OK and accept the changes The selected file or files are deleted 36 iCN 600 series User Manual Backups
4. Kawana Street 2 142 Burbank Northcote Foothill Ranch Auckland CA 92610 New Zealand United States of America Phone 0800 GONAVMAN Phone 866 9 NAVMAN ocnsupport nz navman com support navmanusa com www navman com www navmanusa com Support for Support for Europe Australia Navman Europe Limited Navman Australia Pty Ltd 4G Gatwick House PO Box 479 Peeks Brook Lane Gladesville Horley Surrey RH6 9ST NSW2111 United Kingdom Australia Phone 44 1293 780 500 Phone 02 9879 9000 supportQnavman europe com ocnsupport aus navman com www navman europe com www navman com z2 Se ns Ce Se ab se o So a o o N N o 2004 Navman NZ Limited Navman is a registered trademark of Navman NZ Limited All rights reserved Microsoft Windows 98 ME 2000 or XP Microsoft Internet Explorer are registered trademarks of Microsoft Corporation SmartST Drive Away and Back On Track are trademarks of Navman NZ Limited All rights reserved Acrobat Reader is a registered trademark of Adobe Systems Incorporated All rights reserved All other trademarks and registrations are the property of their respective owners Published in New Zealand MNOOOS00A 40
5. Select Move and press OK The Trip Planner screen will display with the selected destination point highlighted e Use the 8 way toggle to move the destination point up or down the list e Press OK 12 To delete a destination point select the point and press OK The Address Details screen will display e Select Delete from Trip and press OK The Trip Planner screen will display with the selected destination deleted 13 Choose one of the following options e Add Opens the Destination screen to add a destination point e Clear Deletes all destination points e Save Opens the New Favorite screen to save the trio as a Shortcut or Favorite e Go Calculates the route and displays it on the Map or 3D Map screen 15 iCN 600 series User Manual Using the Map screen to Plan a Route You can plan a route directly from the Map screen using the Popup menu 1 From the Main Menu select the Map option The Map screen will display e Move round the Map screen using the 8 way toggle e Zoom using and on the Zoom Brightness button 2 Press OK to display cross hair on the Map screen e To remove the cross hair press ESC 3 Use the 8 way toggle to place the intersection of the cross hair on a destination the street name will display 4 Press OK to select the street as your destination The Pop up menu will display 5 Select Navigate To The route is calculated and displayed on the Map or 3D Map screen 16 iCN 600 series User Man
6. of the preactivated map you must first purchase a Map Product Key from your Navman supplier Install SmartST Desktop then use it to activate your Map Product Key and install the required map See Installing Maps Using SmartST Desktop on page 32 Inserting Memory Card Note The first time you insert the memory card you will first need to remove the plastic space saver from the SD MMC slot To insert the memory card first ensure that the ICN is turned off then gently insert the card in the Memory Card slot with the label facing the front of the ICN Sdoin3 E eIjensny NYWAWN Removing Memory Card To remove the memory card first ensure that the ICN is turned off then gently push the top edge of the card to release it and pull it out of the slot ICN 650 The iCN 650 contains all preactivated maps for USA and Canada in internal memory and does not come with a memory card iCN 600 series User Manual 4 Turning your ICN On and Off Turn ICN On 1 Plug the power adapter into the socket on the left of the ICN and the other end into the vehicle lighter socket 2 Gently pull the bottom of the GPS receiver away from the iCN The receiver will lift out to a horizontal position to allow it to obtain a GPS fix 3 Press the Menu Power button for one second Turn ICN Off 1 Gently push the GPS receiver back towards the iCN The receiver will click in to place 2 Complete one of the following e iCN 635 Press the
7. 3D Map screen To the Intersection of Two Streets E 2A 3 From the Main Menu select the Destination option From the Destination screen select the Intersection option The Destination Intersection screen will display Destination Intersection CALIFORNIA 90013 LOS ANGELES W SRD ST LOS ANGEL S BROADWAY LOS AN gt D er LOS ANGELES LOS AN Select a Country using the 8 way toggle press OK 4 To select a Region or State press OK Select a region Press OK 12 iCN 600 series User Manual 5 To select a Postcode or ZIP Code press OK Select a postcode or ZIP code Press OK 6 To select a City Town press OK Select a city or town Press OK 7 To select the first intersecting street press OK A list of intersecting streets will display Select a street Press OK or J Select And A list of intersecting streets will display Select a street Press OK Press the Page button the ntersection Details screen will display 10 Choose one of the following options e Add to Trip Opens the Trip Planner screen and adds the destination to your trip e Save Saves the destination as a Shortcut or Favorite e Show Displays the address on the Map screen e Go Calculates the route and displays it on the Map or SD Map screen To a City or Town Centre 1 elos From the Main Menu select the Destination option From the Destination screen select the City Town Centre option The
8. Destination City Town Center screen will display Destination City Town Centre gt CALIFORNIA ANY ZIPCODE ALAMEDA CALIFORNI Select a Country using the 8 way toggle press OK To select a Region or State press OK Select a region Press OK To select a Postcode or ZIP Code press OK Select a postcode or ZIP code Press OK To select a City Town press OK Select a city or town Press OK Press the Page button to display the Address Details screen Choose one of the following options e Add to Trip Opens the Trip Planner screen and adds the destination to your trip e Save Saves the destination as a Shortcut or Favorite e Show Displays the address on the Map screen e Go Calculates the route and displays it on the Map or 3D Map screen 13 iCN 600 series User Manual To a Point Of Interest PO A POI is a named site feature landmark or public venue POI s are stored in Categories such as parks and museums POI s can be displayed as icons on a map 1 From the Main Menu select the Destination option The Destination screen will display 2 From the Destination screen select the Points of Interest option The Destination PO screen will display Destination POI WINER Y Select a Category using the 8 way toggle press OK Select a Type press OK to narrow the search Select a Country to confirm press OK Select an Area by pressing Page Enter aname and choose from the list P
9. Menu Power button for three seconds until the ICN turns off e iCN 650 Press the Menu Power button for three seconds When the confirmation message displays select Yes and press OK The iCN will turn off iCN 600 series User Manual 5 Position in a Vehicle Before you begin check if your vehicle is fitted with a heat reflecting or heated windshield If so you will need to purchase an external antenna for your iCN to receive GPS signals There are a number of ways to position an iCN in a vehicle Follow these instructions carefully e Do not install where it could cause interference with vehicle air bags e For security and to avoid overheating do not leave your iCN in an unattended vehicle especially in strong sunlight or extremely cold temperatires e Do not use or handle the ICN when it is hot leave it to cool out of direct sunlight If your ICN is too hot you will be prompted to turn down the brightness press and hold the Zoom button If the ICN continues to get hotter the screen will go blank however voice instructions will continue Option One Suction Mount 1 Slip the locking nut over the ball foot 2 Snap the mounting clip onto the ball foot and tighten the locking nut onto the thread of the mounting clip 3 Position the two locating slots on the underside of the iCN into the tabs on the mounting clip Push the iCN into the clip 4 Clean and dry the surfaces hold the suction cup firmly against the glass and pre
10. N THE FOLLOWING TERMS IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENCE DO NOT INSTALL OR USE THE SOFTWARE AND RETURN THIS PRODUCT PROMPTLY INCLUDING ALL PACKAGING AND WRITTEN MATERIALS TO THE LICENSOR S REPRESENTATIVE AND ANY AMOUNT YOU MAY HAVE PAID WILL BE REFUNDED LESS DELIVERY AND HANDLING CHARGES 1 The Licensor grants to the Customer a non exclusive non transferable licence to use a one copy of the Software on one of the Customer s handheld devices and b the accompanying materials including any manuals contained in the Software the Materials in accordance with the terms and conditions of this Licence 2 Where the Customer uses the Software on a handheld or any other device the Device in a vehicle the Customer must not place secure or use the handheld device in a manner that may cause accidents personal injury or property damage or in any way obstruct the visibility of the Customer The Customer is solely responsible for observing safe driving practices and will not operate the Software while operating a vehicle 3 The copyright and all other intellectual property rights in the Software and Materials including any enhancements or modifications are vested in the Licensor The Customer must not to rent lease reproduce translate adapt vary reverse engineer or modify the Software or Materials nor communicate the same to any person other than in accordance with the terms of this Licence 4 The Customer may not copy th
11. Road press OK Select a road Press OK 8 Press the Page button to display the Address Details screen 9 Select Save press OK The New Favorite screen will display New Favonte 10 Select the Name box and press OK The Enter Name screen will display e Press and hold the ESC button to clear the text box if required e Enter a name for the Favorite e Select Enter and press OK The New Favorite screen wil display e Favorites gt 11 Select the Save As box and use the 8 way toggle to save as a Favorite or Shortcut 12 Select Save and press OK to return to the Map screen Note If you save a Shortcut over a Shortcut a warning message will display Choose No to return to the Edit Favorite or Edit Shortcut screen or Yes to return to the Shortcut list saving Favorites and Shortcuts from the Map Screen 1 From the Main Menu select the Map option The Map screen will display 2 Press OK to display the cross hair 3 Position the intersection of the cross hair on a destination using the 8 way toggle Where the cross hair intersect on a street the street will highlight and the street name will display 4 Press OK The Pop up menu will display 5 Select Add to Favorites and press OK The New Favorite screen will display 6 Select the Name box and press OK The Enter Name screen will display e Press and hold the ESC button to clear the text box if required e Enter a name for the Favorite e Select Enter and press OK The New Fav
12. Time to go to destination TTG GPS strength indicator Your current location SD Map Screen icn 635 650 only Your route displays on a map oriented to the traveling direction with an adjustable horizon 1 From the Main Menu select the Map option The Map screen will display 2 Press the Page button to display the SD Map screen e Zoom using and on the Zoom Brightness button e Use the 8 way toggle up or down to adjust the viewing angle e Press OK to display the Destination Pop up menu LEFT JELLIC E ST North oriented compass par Direction of next turn Additional information can display here Press the 8 way toggle left or right to scroll the options You must have a route calculated to view these options e Current speed e Current time e Current bearing heading HDG e Distance to next turn e Distance to go to destination DTG e Expected time of arrival ETA e Time to go to destination TTG GPS strength indicator Your current location 18 iCN 600 series User Manual Next Turn Screen Displays the turn direction street name and the distance to the next turn A route must have been calculated for this screen to display Access to this screen is set on the Settings Display screen 1 From the Main Menu select the Map option The Map screen will display 2 Press the Page button until the Next Tum screen displays The next instruction Map of the next turn Direction of the next tur
13. US Canada Edition UUU series with OMAaItST Version 3 0 User Manual iCN 600 series User Manual Contents de POOU ON asi inn 3 2 TONPOQUICO E E 4 3 Memory Card ssssessssrssrrnsrrsrrnerrnnrrnrrrerrnnrrnrrrerreerrns 6 4 Turning your ICN On and Off cs 7 POSSUO IRA VEMICIS jest ruas in on eonia Eia 8 6 Main Menu Screen 2 ccecccccecsseeeeesseeeseeeessnaeeeeees 10 7 Screen Keyboard oo eecceeecccececeeeeeeeeeeesenseseeaesenaees 10 ME o EEE o E ee RR E 11 9 setting your Destination ccceececssseeeeeeeeeeeees 12 10 Avoiding an Area eee 17 TIe Viewing YOUN ROUIG csssinsiencedsesseatsceumnstacesortesste 18 12 Map Screen Pop up Menu serena 21 VO TOUS DEMORSIALOL aopmraniainasanaadaninesiitacic nanainaaade Ze t4 Favorites amp SHONCUI sanstrasadasaar Anis ease 23 TO SONS ani aan da ai a 25 16 SmatSI Desktop sseserrerrerrrrrrrrrerrerrerrrrrrerren 30 17 Updating your iON oo ccccceeceseeeeeeeeseeeeeneetaesenaneens 31 18 Installing Maps Using SmartST Desktop OZ 19 Continuous Continental Navigation n s 33 20 SmartST Desktop Advanced Features 35 ole AOC CONGO isa E EE RE RERE 38 iCN 600 series User Manual 1 Introduction Whether you travel in your own country or overseas the ICN will direct you to your destination without the need for map books and second hand instructions The Global Positioning System is available free of charge at an
14. ap screens select the Topographic Display check box 10 Press the Page button 11 To display grid lines on the Map and 3D Map screens select the Display Map Grid check box 12 To display a North pointing compass on the Map and SD Map screens select the Display Compass on Map checkbox 13 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box 26 iCN 600 series User Manual Internal Map Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Maps option 3 From the Settings Maps screen select the Internal Maps option The Maps Internal screen will display 4 To activate a map use the 8 way toggle to scroll to the map or maps you require Press OK 5 Press ESC repeatedly until the Map screen displays e f you have made changes to maps select Yes and press OK to accept the Warning dialog box Memory Card Map Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Maps option 3 From the Settings Maps screen select the Memory Card Maps option The Maps Memory Card screen will display 4 To activate a map use the 8 way toggle to scroll to the map or maps you require Press OK 5 Press ESC repeatedly until the Map screen displays e f you have made changes to maps select Yes and press OK to accept the Warning dialog box Points Of Inter
15. aps are colored to indicate w TE ae a Selected maps whether they are Pai T ps Selected ee tar a lus AT EEE a e Available on CD EU Download selected e Available from Navman or r trail maps to the iCN memory card or memory card writer e Not available Information about the map 30 iCN 600 series User Manual 17 Updating your ICN Updating from Previous Version of SmartST If a software update is available for your ICN you will be prompted when you open SmartST Desktop 1 Open SmartST Desktop Start gt Programs gt Navman gt SmartST Desktop 2 Follow the prompts to update your iCN software to the latest version of SmartST Updating your Version of SmartST It is recommended that you regularly check the Navman website for software updates to the version of SmartST you are using 1 Open SmartST Desktop Start gt Programs gt Navman gt SmartST Desktop 2 On the Setup menu select Update software then Check for updates on the web Your computer will connect to the Internet and display the Navman website 3 Download the update for your region to your computer if available 4 On the Setup menu select Update software then Update software on iCN Follow the prompts to update your ICN software 31 iCN 600 series User Manual 18 Installing Maps Using SmartST Desktop Your iCN comes with a pre activated map If you require an additional map you must f
16. arning dialog box 5 Press ESC repeatedly until the Map screen displays 17 iCN 600 series User Manual 11 Viewing Your Route Once a route has been calculated there are a number of ways to view it Cycle through the screens by pressing the Page button To cancel a route or stop the Route Demonstrator return to the Main Menu select the Route Information option then the Cancel Route option Back On Track Automatic Rerouting Your route is re directed if you make a wrong turn The symbol will display upper left of the SD Map and Next Instruction screens while the route re calculates Automatic rerouting is enabled on the Routing screen Map Screen This screen displays north with your current position and surrounding street names If a route has been calculated the route and turns are highlighted From the Main Menu select the Map option e Zoom using and on the Zoom Brightness button e Press OK to display the cross hair Press again to display the Pop up menu Your current position is marked with d Additional information can be displayed here Press the 8 way toggle left or right to scroll the following options Your next turn is high lighted in a different color to future turns The color will depend on the theme you are using e Current speed e Current time e Current bearing heading HDG e Distance to next turn e Distance to go to destination DTG e Expected time of arrival ETA e
17. e Software or Materials except that one copy of the Software may be made to the extent that such copying is necessary for the Customer s own backup purposes 5 Except for the warranty provided by the Licensor for the product that includes the Software the Licensor expressly excludes to the fullest extent permitted by law all representations or warranties express or implied except any which may not lawfully be excluded including the implied warranties of merchantability and fitness for a particular purpose 6 The Licensor will not in any circumstances be liable under the law of tort contract or otherwise for any indirect or consequential loss or damage including any loss of profits however caused arising in connection with the use of or inability to use the Software If any limitation or exclusion or liability contained in this Licence is held to be invalid for any reason and the Licensor becomes liable for loss or damage that would otherwise have been excluded that liability will be limited to the total amount actually paid by the Customer for the Software 7 The Licensor may terminate this Licence immediately if the Customer breaches any of its obligations under this Licence Immediately following termination of this Licence the Customer must deliver to the Licensor s Representative or destroy all copies of the Software and Materials in whatever form possessed by the Customer Limited Warranty Agreement IMPORTANT The following ter
18. e low screen brightness when possible Volume 1 Press and hold the Volume button to display the Volume bar 2 Press or on the Volume button to adjust the volume Route Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Routes option The Routing screen will display Move the Route Type slider towards Shortest to give more weighting Routin to the shortest distance when calculating a route Move the Route DES E Type slider towards Quickest to give more weighting to the fastest fines at time when calculating a route Preference for Freeways Move the Preference for Freeways slider towards Use Less to use E freeways less often when calculating a route Move the Preference BE RR FreTerence TOF Urban Roads for Freeways slider towards Use More to use freeways more often 5 when calculating a route Move the Preference for Urban Roads slider towards Use Less to Set Default use urban roads often when calculating a route Move the Preference Emi for Urban Roads slider towards Use More to use urban roads more often when calculating a route Press the Page button 7 Select the Avoid Toll Roads Avoid Unsealed Roads and Avoid Ferries check boxes to avoid these areas when your route is calculated Select the Warn when using Toll Roads Warn when using Unsurfaced Roads and Warn when using Ferries check boxes to display a warning message at the start of y
19. een Multiple Destination Points with the Trip Planner You can use the Trip Planner to set multiple destination points for your trip Your route will be calculated to go via each of these points in the specified order Destination points can be added via the Trip Planner screen or by selecting Show Details from the pop up menu on the Map screen then Add to Trip 1 From the Main Menu select the Trip Planner option The Trip Planner screen will display Trip Planner OCEAN VIEW RD AARON CRT UNDERWOOD RD 2 Select Add and press OK The Destination screen will open 3 Select Address and press OK The Destination Address screen will open Note You can also add destination points using intersections Cities Towns Points of Interest and recent destinations 4 Select a Country using the 8 way toggle press OK 5 To select a Region or State press OK Select a region Press OK 6 To select a Postcode or ZIP Code press OK Select a postcode or ZIP code Press OK 7 To select a Town press OK Select a city or town Press OK 8 To select a Road press OK Select a road Press OK 9 Press the Page button to display the Address Details screen 10 Select Add to Trip and press OK The destination point is added to your trip The Trip Planner screen will display e To add another destination point go to step 2 11 To move a destination point up or down select the point and press OK The Address Details screen will display e
20. ery next instruction or hold down to adjust the voice guidance volume E Menu Power Press to return to the Main Menu or hold down to turn on off ICN 630 635 650 only Back Components iCN 600 series User Manual Component Description Speaker Outputs voice commands and warnings Use Volume button to adjust Memory Card Slot Slot for memory card Insert card with label facing the front of the ICN GPS Receiver Receives signals from GPS satellites when lifted out to the horizontal position Car Antenna Socket Connection socket for GPS car antenna not included Power Socket Connection socket for power cable USB Socket Connection socket for USB cable to your computer Remote Control Button functions are the same as the iCN control buttons You cannot turn on the iCN using the Remote Control Only included with the iCN 635 and 650 Available for the ICN 610 as an accessory iCN 600 series User Manual 3 Memory Card ICN 635 Your ICN may come with an optional memory card containing a preactivated map To navigate to your destination you will first need to insert the memory card into your ICN Important If your ICN did not come with a memory card you will first need to purchase one separately then install the required map from the enclosed Map CDs using SmartST Desktop See Installing Maps Using SmartST Desktop on page 32 To navigate in an area outside
21. esktop Colors section Desktop tab gt Settings gt Colors Adjust the settings to change the look of the map type Color Settings ap on iCN Controls map colors Displays the e map border color e map color e map border width Adjusts the map border width Controls the map display e solid color e no color e crosshatch texture se rece Controls geographic features displayed on the map Features are only visible if the map has no color or crosshatch texture Please select the Map Data Map Layers Layers that you want to download to the iCh To conserve space on your iCN and memory card you can choose map layers to install The layers you can choose from are e Points of Interest POIs e Water parks e Land contours topography To access the Map Layers section Desktop tab gt Settings gt Layers Select or clear each checkbox to indicate the layers to install for each map elect Data to load M POIs M Roads W Water Parks etc a Land Contours 35 iCN 600 series User Manual Points of Interest POI Editor You can add custom Points of Interest POIs using the POI Editor A maximum of 25 Custom POls can be saved on your iCN The Custom POI files are listed on the My PO screen Custom POls can be set to announce when in close proximity at the Select Active POI screen Step 1 Create a Custom POI File 1 Create a New POI File e On the Map menu click POIs The POI Editor window will o
22. est POIs Settings Points Of Interest POls in a region are grouped into Categories This function allows you to select the categories you need For example you may be interested in entertainment venues only and want to disable other POI categories such as schools 1 From the Main Menu select the Settings option Paints of Interest Display Categories 2 From the Settings screen select the Maps option 3 From the Settings Maps screen select the Points of Interest option The Points of Interest screen will display 4 To display POI icons on the Map and 3D Map screens select the Show Icons on Map check box 5 Use the 8 way toggle to scroll to the category or categories you require Press OK w E w v m wa Ci t e Press the Page button to view additional categories 6 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box My Points of Interest POI Settings Custom Points Of Interest POIs are installed from the SmartST Desktop POI Editor and listed on the My POIs screen 1 From the Main Menu select the Settings option 2 From the Settings screen select the My Data option 3 From the My Data screen select the My POI option The My PO screen will display 4 Use the 8 way toggle to scroll to the POI file or files you require Press OK 2i iCN 600 series User Manual e Press the Page button t
23. estination Trip Planner 7 Use the 8 way toggle to highlight Main Menu options confirm a selection by pressing OK e Return to the Main Menu at any time by pressing the MENU Power button 7 Screen Keyboard The screen keyboard will display when required to enter text such as when entering a street name 1 Use the 8 way toggle to move around the keyboard Select Road 1 4 of 99 e Press OK to select a character TolkagelRitiviulif olel7 ie 5 F J LHS a e Press ESC to delete a character Hold ESC to delete the line ENE RT CAVA af e Press Zoom up to display the Alternative keyboard Penne FAC LAKE _ e Press Zoom down to return to the Alphabetical keyboard LAKE ADLON CT SAN DIEGO SAN DIEGO MICO LAKE ADLON DR SAN DIEGO SAN DIEGO MCO LAKE ALAMOR AYE SAN DIEGO SAN DIEGO LAKE ALBANO AYE SAN DIEGO SAN DIEGO MM e The list will reduce to match your search criteria Press Page to see more of the list 2 Use the 8 way toggle to select a search result from the list Press OK iCN 600 series User Manual 8 GPS Status Signals are transmitted by Global Positioning System GPS satellites orbiting the Earth This screen provides a visual representation of the information being received Latitude and longitude are displayed along with a North pointing compass the heading in degrees and ground speed Satellites available are shown as segments From the Main Menu select Settings gt More Settin
24. gs gt GPS Status The GPS Status screen will display e Yellow a satellite is being tracked but is not being used e Red a satellite is being used to determine a two dimensional 2D fix e Green the satellite is being used to determine your position GPS Status Latitude and longitude i Current heading in degrees and of the current position ground speed Each segment represents a satellite A green circle indicates a valid fix Local time The circle under the sattelite segments is green when there is a valid fix 2D or 3D and red when there is no fix While a 2D fix is sufficient to maintain a valid fix a 3D fix is more accurate Satellite Signal Strength From the GPS Status screen press the Page button to display the Satellite Signal Strengths screen The strength of each satellite is displayed on a bar chart Satellite Signal Strengths The circle on the right hand side of the screen displays green when there is a valid fix 2D or 3D and red when no fix is available The satellites available from your current position are shown as bars e Grey no signal at all e Red this signal is not being used to fix your position e Green this signal is being used to fix your position Satellite Position Indicators Satellite analysis From the Satellite Signal Strengths screen press the Page button to display the Satellite analysis screen The position of each satellite is shown in relation to Eart
25. h You can view the status and performance of a satellite by selecting it using the 8 way toggle The satellite performance will display Each satellite is represented by a small empty circle e Gray circle no signal e Red circle asignal not being used to fix your position e Green circle a signal being used to fix your position e Yellow satellite icon shows the current satellite 11 iCN 600 series User Manual 9 Setting your Destination Before you travel you must specify a destination To a Street Address 1 2 SO o Oe a From the Main Menu select the Destination option From the Destination screen select the Address option The Destination Adaress screen will display Destination Address E ANY STATE ANY ZIPCODE ANY TOWN Select a Country using the 8 way toggle press OK To select a Region or State press OK Select a region Press OK To select a Postcode or ZIP Code press OK Select a postcode or ZIP code Press OK To select a Town press OK Select a city or town Press OK To select a Road press OK Select a road Press OK Press the Page button to display the Address Details screen Choose one of the following options e Add to Trip Opens the Trip Planner screen and adds the destination to your trip e Save Saves the destination as a Shortcut or Favorite e Show Displays the address on the Map screen e Go Calculates the route and displays it on the Map or
26. he locking nut over the ball foot with the flat side facing upwards 11 Snap the socket clip onto the ball foot 12 Wind the locking nut onto the thread of the socket clip until firm 13 Snap the iCN onto the socket clipw Position the two locating tabs on the underside of the iCN into the corresponding slots on the socket clip Then push the ICN into the clip 14 Open the antenna outwards so the GPS antenna has a clear view of the sky 15 Plug the power adapter into the socket on the left of the ICN and the other end into the vehicle lighter socket ICN 635 650 only iCN 600 series User Manual 6 Main Menu Screen The Main Menu screen gives you access to all of the iCN s functions including navigating to a destination 1 Press the MENU Power button for about one second 2 The Language screen will display Use the 8 way toggle to highlight your language choice and press OK e You can stop the Language screen displaying on startup by selecting the Do not show on startup check box Press OK to confirm 3 Press the Page button 4 The Warning screen will display Read the warning mesage and press OK to confirm that you understand 5 The Tutorial will display Press the Page button to move through the screens e You can turn off the Tutorial on startup by using the 8 way toggle to highlight the Do not show Tutorial on Startup check box press OK to confirm 6 The Main Menu screen will display Main Menu D
27. irst purchase a Map Product Key from your Navman supplier Use SmartST Desktop to activate your Map Product Key and install the required map Maps can be stored on SD or MMC memory cards directly from SmartST Desktop or via a memory card writer The maximum size card for use in the ICN is 512 MB Install and Activate Maps on your ICN 1 2 Open SmartST Desktop Start gt Programs gt Navman gt SmartST Desktop Insert a SmartST Map CD into your Computer CD ROM drive the available maps will display 3 Click the map you want to install to your ICN Maps are of population areas and not of political areas such as counties or states You may need to install multiple maps to cover the desired geographical area e f you have already activated a Map Product Key or your ICN came with a pre activated Map Product Key the map will change color to indicate it has been selected Go to step 6 Follow the prompts to activate the Map Product Key e Enter your Map Product Key e Your Computer will connect to the Internet and activate your Map Product Key e You will be prompted to enter or update your contact details so Navman can advise you when updates are released Select a map to install Maps are listed in the Selected section of the Desktop Selected Maps tab e f you have another Map Product Key to activate go to step 3 Click an Add to button to install all maps listed in the Selected section of the Desktop Selected Maps tab t
28. isplay when you are connected Open SmartST Desktop if it is not already open Start gt Programs gt Navman gt SmartST Desktop On the Map menu click Basemaps The Navman Basemap Utility window will open Select the Basemap to remove Click the appropriate Remove button to remove the Basemap from your ICN memory card or memory card reader 34 iCN 600 series User Manual 20 SmartST Desktop Advanced Features Find City ES City Mame partial match ok Find a City or Town To search for a City or Town to verify the map to be installed Encinitas California United States of America 1 From the Map menu click Find City The Find City window will open Endicott Mew York United States of America Endwell Mew York United States of America 2 Type the name of the City or Town in the City Name field The list of Englewood Colorado United States of America no Englewood Florida United States of America available Cities will reduce to match your search Englewood New Jersey United States of Americ Englewood Ohio United States of America 3 Double click the name of the City or Town Enid Oklahoma United States of America Ennis Texas United States of America The Desktop Map will rotate to center on the selected City or Town Ensley Florida United States of America Enterprise Alabama United States of America Enumclaw Washington United States of Americe Map Colors and Textures To access the D
29. l select the Show Tutorial option and press OK lh e The Tutorial will display Press the Page button to move through the screens 7 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box 29 iCN 600 series User Manual 16 SmartST Desktop SmartST Desktop is used to download maps to your iCn obtain software updates manage Custom Points of Interest POIs and install Basemaps Note For Windows XP install XP Service Pack 1 from Microsoft before you install SmartST Desktop Install SmartST Desktop on your Computer 1 Close all open programs on your Computer 2 Insert the SmartST CD into your computer CD ROM drive The SmartST Desktop installer will start e f your computer does not automatically launch the CD start the installation manually Start gt Run Type d setup6xx_3 exe where d is the letter assigned to your CD ROM drive Click OK 3 Follow the screen prompts to install SmartST Desktop e Select your preferred language for SmartST Desktop when prompted e Review and accept the License Agreement when prompted e Select a destination folder when prompted SmartST Desktop will open You are now ready to install maps on your iCN To Open SmartST Desktop Once SmartST Desktop has been installed you can access it from the Start menu Start gt Programs gt Navman gt SmartST Desktop SmartST Desktop cedo je M
30. ll display when you are connected 2 Open SmartST Desktop if it is not already open Start gt Programs gt Navman gt SmartST Desktop 3 On the Map menu click Basemaps The Navman Basemap Utility window will open gt Navman Basemap Installer Basemaps ich 225 6MB Available add va US Basemap 43 USA Basemap 43 World Outline 30 2MB Required iCN SD o Not Available al PC Removable Media v Not Available Progress o 4 Click the appropriate Add button to install the Basemap to the ICN memory card or memory card reader Activate Basemap 1 On your iCN from the Main Menu tap the Settings option 2 From the Settings screen tap Maps 3 Complete one of the following e To activate a Basemap on the ICN from the Maps screen tap Internal Maps The Settings Maps Internal screen will display e To activate a Basemap on the memory card from the Maps screen tap Memory Card Maps option The Settings Maps Memory Cara screen will display 5 Select the Basemap you require 6 Press ESC repeatedly until the Map screen displays e Tap Yes to accept the Warning dialog box 33 iCN 600 series User Manual Remove Basemap 1 O A O N Connect the ICN to your computer e Connect the ICN to mains power supply using the adapter provided e Connect the USB cable to the ICN and to your computer USB port e Turn on the iCN by pressing the Menu Power button The ICN USB Connection screen will d
31. menu Select Set as Start Location Press OK Step 3 Select Destination Point 1 Press OK and place the intersection of the cross hair over your destination point using the 8 way toggle 2 Press OK to display the Pop up menu Select Navigate To Press OK The 3D Map screen will display and the Route Simulator starts your route e f you have selected the Repeat check box on the Routing 2 3 screen the Route Demonstrator will repeat until you stop it To Disable Route Demonstrator e Press Menu Power to return to the Main Menu screen e Select the Route Information option then the Cancel Route option e Press OK to confirm You will be returned to the Vain Menu screen 22 iCN 600 series User Manual 14 Favorites amp Shortcuts You can save up to 200 destinations as Favorites 10 of which can be Shortcuts 50 Favorites for ICN 610 620 saving Favorites and Shortcuts 1 From the Main Menu select the Destination option 2 From the Destination screen select the Address option The Destination Address screen will display Note You can also add a Favorite or Shortcut using intersections Cities Towns Points of Interest and recent destinations 3 Select a Country using the 8 way toggle press OK 4 To select a Region press OK Select a region Press OK 5 To select a Postcode or ZIP Code press OK Select a postcode or ZIP code Press OK 6 To select a Town press OK Select a city or town Press OK 7 To select a
32. ms and conditions may vary from country to country Hardware Product Navman warrants its products to be free from defects in materials or workmanship under normal use for one year from the date of purchase the Warranty Period to the original owner You To claim under this warranty You must return the product to the place of purchase or a service centre approved by Navman Service Centre You must produce an original sales receipt as proof of purchase You will be solely responsible for all shipping charges freight insurance and proper packaging to prevent breakage in transit Navman will at its discretion repair or replace any defective product or its components at no cost to You for parts and labour The replacement product or component takes on the warranty status of the original product or component This is Your exclusive remedy for defective producis Limitations This warranty does not apply to products that have been damaged or rendered defective a as a result of incorrect installation misuse mishandling misapplication accident abuse breakage or other external causes b by operation outside the usage specifications stated in the product documentation c by modification or service other than by Navman or its approved Service Centres Software Product Navman warrants that a the software will perform substantially in accordance with the accompanying written materials for a period of 90 days from the date of purchase and
33. n 19 iCN 600 series User Manual Route Information The Route Information screen provides information about your current route and lets you skip a trip destination point or cancel a route The screen is only available from the Main Menu when you are navigating a route Show Route Select to display your entire route on the Map screen Instruction List Select to display the nstruction List screen The Instruction List screen is similar to the Next Four Turns screen except that it displays your entire route Use the Page button to page through the instruction list Instruction 1 4 of 29 Summary Select to display the Route Summary screen containing your From and To addresses Estimated Time to arrival and the Distance remaining to your destination If you are navigating a multiple destination trip the information displayed will relate to your next destination point Route Summary Skip Destination Select to skip the next destination point of your trip Only available when navigating a multiple destination trip Cancel Route Select to cancel the route 20 iCN 600 series User Manual 12 The Map Screen Pop up Menu The Pop up menu allows you to access navigational functions from the Map screen 1 Move round the Map screen using the 8 way toggle Zoom using and on the Zoom Brightness button 2 Press OK to display the cross hair on the Map screen e To remove the cross hair press ESC 3 Positio
34. n Additional information can be displayed here Press the 8 way toggle left or right to scroll the following options BARRYS POINT RD e Current speed I e Current time e Current bearing heading HDG Your current location e Distance to next turn e Distance to go to destination DTG e Expected time of arrival ETA e Time to go to destination TTG Distance to the next turn GPS strength indicator Next Four Turns Screen This screen displays the next four turns of your route the turn direction street name and the distance to the turn A route must have been calculated for this screen to display Access to this screen is set on the Settings Display screen 1 From the Main Menu select the Map option The Map screen will display 2 Press the Page button until the Next Four Instructions screen displays The next turn is highlighted at the top of the list LEFT CA 84W DECOTO 4 6 RD mi The distance to this turn EXIT RIGHT 11 5 CA 84 HWY 84 mi Your destination or next DESTINATION CA 64 14 3 Additional information can be displayed destination point E HWY 84 mi here Press the 8 way toggle left or NW right to scroll the following options 1880 e Current speed e Current time e Current bearing heading HDG e Distance to next turn e Distance to go to destination DTG e Expected time of arrival ETA e Time to go to destination TTG GPS strength indicator Your current locatio
35. n the intersection of the cross hair on a destination using the 8 way toggle Where the cross hair intersect on a street the street name will display on the Map screen 4 Press OK to select the street as your destination The Pop up menu will display Deletes an Avoid Area if enabled Displays the Destination POI screen Page displays the Select nearest POI screen or further screens if available 6 Press OK to confirm your selection ICN 635 650 only Defines an area on the map that is avoided during your journey 21 iCN 600 series User Manual 13 Route Demonstrator The Route Demonstrator allows you to e Preview a route or e Plan and view a route without a GPS fix such as when you are inside a building step 1 Activate Route Demonstrator 1 From the Main Menu select the Settings option 2 From the Settings screen select the Routes option The Routing screen will display 3 Press the Page button twice 4 Select the Demonstrate Route check box press OK 5 Press ESC repeatedly until the Map screen displays e Press OK to accept the Warning dialog box step 2 Select Departure Point If you have a GPS fix you do not need to select a departure point unless the demonstrated route is to start eleswhere 1 From the Main Menu select the Map option The Map screen will display 2 Press OK and place the intersection of the cross hair over a departure point using the 8 way toggle 3 Press OK to display the Pop up
36. ngs Soeed screen will display 4 To enable an audible warning when traveling over a specified speed select the speed over which the warning is to sound from the Speed box using the 8 way toggle Note The GPS signal alert will be active when a Speed alert is selected 5 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Operation Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Alerts option 3 From the Alerts screen select the Operating option The Operating screen will display 4 To enable a warning dialog box to be displayed for the driver when a button is pressed while driving select the Warn driver when operating check box 5 To enable an audible and visual alert when the GPS signal is lost select the Warn when GPS lost check box Note The GPS signal alert will be active when a Speed alert is selected 28 iCN 600 series User Manual 6 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Clear Data Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the My Data option 3 From the My Data screen select the Clear Data option The Settings Clear Data screen will display 4 To delete Recent destinations Favorites Shortcuts or Avoid Areas scroll
37. o your iCN memory card or PC writer Only ICN 620 630 635 650 can install to internal memory Remove Maps from your iCN 1 Open SmartST Desktop Start gt Programs gt Navman gt SmartST Desktop 2 Open the Maps on ICN section CN tab gt Maps on iCN 3 Click the map to be removed and select Remove from iCN from the pop up menu 32 iCN 600 series User Manual 19 Continuous Continental Navigation You can seamlessly navigate between installed maps without the need for installing all maps en route This is achieved by using a Basemap A Basemap is a map of a large area such as West Europe or United States and Canada containing main roads that connect cities and towns You can select a road or POI on the Basemap as your start point or destination Use the Basemap Installer to manage Basemaps Basemaps e contain roads and ferry connections of high national and international importance e use less memory than would be necessary to install all equivalent detailed maps e do not include smaller roads and have a reduced level of geographical detail iCN 635 has basemap preinstalled ICN 650 does not require basemap as all detailed maps preinstalled Install Basemap 1 Connect the iCN to your computer e Connect the iCN to mains power supply using the adapter provided e Connect the USB cable to the ICN and to your computer USB port e Turn on the ICN by pressing the Menu Power button The iCN USB Connection screen wi
38. o view additional files 5 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Active Points Of Interest POIs Settings Active POIs are custom POls that are announced when in close proximity Custom POIs are added from the SmartST Desktop POI Editor 1 From the Main Menu select the Settings option 2 From the Settings screen select the Alerts option 3 From the Alerts screen select the Active POI option The Select Active POI Activation Settings PO screen will display 4 Use the 8 way toggle to select a custom POI Use the keyboard to narrow your search if required 5 Click OK The PO Activation Settings screen will display 6 Select the Active check box to activate the POI 7 Modify the settings as required e To enable an audible chime when the POI is in close proximity select the Audio Warning check box e To enable a visual warning when the POI is in close proximity select the Visual Warning check box e Move the Distance to POI slider to select the distance at which the warnings will activate 8 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Speed Alert Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Alerts option 3 From the Alerts screen select the Speed option The Setti
39. of operation for each country in which the device is used It is your sole responsibility to adhere to the following safety instructions at all times e Do not operate the iCN while driving or place the iCN in a position that obstructs the driver s view e Do not mount in a way that interferes with airbags or other safety equipment e Do not leave in view while your vehicle is unattended especially in strong sunlight or extremely cold temperatures e Do not use or handle the ICN when it is hot leave it to cool out of direct sunlight Navman disclaim all liability for use of this product in a way that may cause accidents damage or may violate law iCN 600 series User Manual 2 ICN Features It is recommended that you familiarize yourself with the basic operations of your ICN such as using the 8 way toggle and volume control Front Components Component Description D Screen Displays maps and menu options OK Select the highlighted menu option text or command Zoom Brightness Change the amount of map area shown or press and hold to adjust the screen brightness Cancels an action deletes the last text character returns to the previous ssc screen Hold down to delete a line of text 8 way Toggle Use to scroll up down and move round a map to select a destination O Pade Change map views including SD Map view Use to view further screens if 9 available D le Press to hear the v
40. orite screen will display 10 Select the Save As box and use the 8 way toggle to save as a Favorite or Shortcut 11 Select Save and press OK to return to the Map screen Note If you save a Shortcut over a Shortcut a warning message will display Choose No to return to the Edit Favorite or Edit Shortcut screen or Yes to return to the Shortcut list 23 iCN 600 series User Manual Editing Favorites and Shortcuts Edit the name of the Favorite or Shortcut or save a Favorite as a Shortcut 1 From the Main Menu screen select the Favorites option e f you have saved a Shortcut the Shortcuts screen will display To edit a Favorite press the Page button to display the Favorite screen NO Select from the list press OK The Edit Shortcut or Edit Favorite screen will display Oo Select the Name box and press OK The Enter Name screen will Edit Favorite display e Press and hold the ESC button to clear the text box if required e Enter a name for the Favorite e Select Enter and press OK The New Favorite screen will display 4 To save a Favorite as a Shortcut use the 8 way toggle in the Save Fearne gt As box to select a Shortcut position Show co 5 Select Save press OK Note If you save a Shortcut over a Shortcut a warning message will display Choose No to return to the Edit Favorite or Edit Shortcut screen or Yes to return to the Shortcut list Using Shortcuts 1 From the Main Menu select the Favorite
41. our trip if your route will include these areas To enable Back on Track automatic rerouting select the Automatic Rerouting check box Automatic rerouting will update the calculated route if you take a wrong turn 10 Press the Page button 11 To enable the Route Demonstrator allowing you to plan and view a route without a GPS fix select the Demonstrate Route check box 12 To enable the route demonstrator to be repeatedly played select the Repeat check box 13 To enable the SmartST demonstration to be played select the SmartST Demonstration check box The demonstration will navigate between the first and second Favorite after a ten second delay 14 To enable GPS datalogging select Track Recording The Data Logging Enabled screen will display Note A memory card is required for datalogging e Select the Name of log file box and press OK The Enter Text screen will display 20 iCN 600 series User Manual e Press and hold the ESC button to clear the text box if required e Enter a name for the log file e Select Enter and press OK The Data Logging Enabled screen will display e Select Yes and press OK The Routing screen will display 15 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Language Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the Language option The Set
42. pen e On the File menu of the POI Editor click New Text File The POI File Name window will open e Type a name for the file in the File Name box and click OK The file name can be up to eight characters with no spaces 2 Add a PO to the POI File e On the Edit menu click New The PO Details window will open e Type a description for the POI in the Description box POI Details e On the Degrees Minutes Seconds tab type or select o the degree minute and second of the POI latitude in the i Latitude boxes ERA o 4 o aj o aoa END k e On the Degrees Minutes Seconds tab type or select tonstude GEC W the degree minute and second of the POI longitude in the Longitude boxes OK Cancel 3 Repeat step 2 until all POIs have been added to the POI file Degrees Minutes Seconds Decimal Degrees 4 On the File menu click Save The POI file is saved Step 2 Save Custom POI File to your iCN 1 On the File menu click Save to Device The POI Options window will open 2 Modify the POI settings as required POL Options e To activate the POI select the Active check box If you do not activate the POI you will only be able to configure the O E we O Importance and Icon File settings ime E 0 200m e To enable a visual warning when the POI is in close proximity select the Visual Alert check box POI Visibility Level Icon File e To enable an audible chime when the POI is in close proximity select the
43. ress OK The Select PO screen will display press OK the Select PO text entry screen will display a list Select a POI using the 8 way toggle Press Page to view more Press OK to select from the list Oo O N O OF A W The POI Detail screen will display Choose one of the following options e Add to Trip Opens the Trip Planner screen and adds the destination to your trip e Save Saves the destination as a Shortcut or Favorite e Show Displays the address on the Map screen e Go Calculates the route and displays it on the Map or 3D Map screen To a Recent Destination The last 30 routes are stored as Recent destinations Recent is only available if a route has been calculated 1 From the Main Menu select the Destination option 2 From the Destination screen select the Recent option The Recent screen will display Recent YIEW RD GLENFIELD MOSSOP RISE GLENFIELD WAIRAU RD GLENFIELD JAMES ST GLENFIELD KATHLEEN PL GLENFIELD VIEW RD HOWICK SUNNYBRAE RD GLENFIELD ADRANGI PL NORTHCOTE BIRKENHEAD AVE BIRKENHEAD 3 Select a destination from the list press OK 4 Choose one of the following options e Add to Trip Opens the Trip Planner screen and adds the destination to your trip e Save Saves the destination as a Shortcut or Favorite 14 iCN 600 series User Manual e Show Displays the address on the Map screen e Go Calculates the route and displays it on the Map or 3D Map scr
44. s option The Shortcuts screen will display 2 Select from the list and press OK The Edit Shortcut screen will display 3 Select one of the following options and press OK e Save Saves the destination as a Shortcut e Delete Deletes the selected input e Show Displays the address on the Map screen e Go Calculates the route and displays it on the SD Map screen e Add to Trip Opens the Trip Planner screen from where you can add the destination to your trip Using Favorites 1 From the Main Menu screen select the Favorites option e f you have saved a Shortcut the Shortcuts screen will display Press the Page button to display the Favorite screen 2 Select from the list and press OK The Edit Favorite screen will display 3 Select one of the following options and press OK e Save Saves the destination as a Shortcut e Delete Deletes the selected input e Show Displays the address on the Map screen e Go Calculates the route and displays it on the SD Map screen e Add to Trip Opens the Trip Planner screen from where you can add the destination to your trip 24 19 iCN 600 series User Manual settings You can modify the following settings to suit your preferences screen Brightness 1 Press and hold the Zoom Brightness button to display the brightness indicator bar 2 Press or on the Zoom Brightness button to adjust the brightness The ICN can heat up when display brightness is set at over 70 Us
45. ss down the lever 5 Open the antenna outwards so it has a clear view of the sky 6 Plug the power adapter into the socket on the left of the ICN and the other end into the vehicle lighter socket iCN 600 series User Manual Option Two Adhesive Tape and Screw Mount You can use the base plate adhesive tape and screws supplied to mount the ICN directly into the vehicle dashboard Important This is a permanent solution the adhesive tape cannot be removed once fixed and the screws will leave holes in your dashboard 1 Choose a position on the dashboard where the ICN will be clearly visible by the driver Use the alcohol swab to ensure all surfaces are clean and dry 2 Remove one of the backing layers from the adhesive tape and press it firmly to the underside of the base plate for 30 seconds Press the suction cup firmly in to the base plate and press the lever down Remove the second backing layer from the adhesive tape Position the ball foot in to position on the dashboard and press down firmly for 30 seconds O oa E O Fit the retainer ring inside the screw plate by sliding the four locating tabs into the corresponding slots on the underside of the screw plate 7 Place the screw plate over the ball foot ensuring the suction cup tab fits in to the tab slot on the screw plate 8 Use the three screws to fasten the screw plate firmly to the dashboard 9 Press the screw caps over the screw heads 10 Slip t
46. tings Language screen will display Language Language 3 To change the voice scheme used for voice guidance during E navigation select your preferred voice scheme from the Language box using the 8 way toggle Voice Guidance Instructions Enable 4 To enable voice guidance during navigation select the Enable check box 5 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box Display Settings From the Main Menu select the Settings option t 2 From the Settings screen select the Maps option 3 From the Settings Maps screen select the Display option The Settings Display screen will display 4 To enable auto zoom when navigating to your destination select the Settings Display Auto Zoom check box If selected the Map and 3D Map screen will automatically zoom in or out depending on your speed to allow optimal view of your route Map Color Scheme 5 To enable access to the Next Tum screen select the Display Next Ps Onsen Turn Screen check box Map Colours 6 To enable access to the Next 4 Turns screen select the Display Next 4 Turns Screen check box 7 To change the color scheme select your preferred scheme from the ESC 4 Map Color Scheme box using the 8 way toggle 8 To improve screen contrast in light or dark conditions select either Day or Night 9 To display a topographical map on the Map and 3D M
47. to the appropriate option and press OK e Select Yes and press OK to accept the Warning dialog box 5 Press ESC repeatedly until the Map screen displays Measurement Settings 1 From the Main Menu select the Settings option 2 From the Settings screen select the More Settings option 3 From the General screen select the Measurements option The Measurements screen will display 4 Select either the Decimal Degrees or Degrees Minutes Seconds option to indicate the position format to be used Ol To set the time select the offset from Coordinated Universal Time UTC for your location from the Local Time Offset box using the 8 way toggle 6 Select either the 12 Hour or 24 Hour option to indicate the time format to be used 7 Select either the kilometres or miles option to indicate the distance units to be used 8 Press ESC repeatedly until the Map screen displays e f you have made changes to the settings press OK to accept the Warning dialog box otart Up and Tutorial Settings From the Main Menu select the Settings option t 2 From the Settings screen select the More Settings option 3 From the General screen select the Startup option The Startup screen will display 4 To display the Tutoria on startup select the Tutorial Screen check Startup Dox e Show at Startup 5 To display the Language Selection screen on startup select the Language Selection Screen check box 6 To display the Tutoria
48. ual 10 Avoiding an Area You can calculate a route that avoids a specified area on the map Up to ten Avoid Areas can be active at any one time Avoid Areas are displayed as shaded areas If no alternative route exists you will be routed through an Avoid Area ICN 635 650 only Adding an Avoid Area 1 From the Main Menu select the Map option The Map screen will display 2 Press OK and place the intersection of the cross hair over the area that you want to avoid using the 8 way toggle 3 Press OK to display the Pop up menu 4 Select Add Avoid Area Press OK An Avoid Area is displayed CULEBRA TER CHESTNUT ST 25 5 Set the Avoid Area to the correct size and position using the 8 way toggle 6 Press OK to enable the Avoid Area Deleting an Avoid Area 1 From the Main Menu select the Map option The Map screen will display 2 Press OK and place the intersection of the cross hair over the Avoid Area that you want to delete using the 8 way toggle 3 Press OK to display the Pop up menu Select Delete Avoid Area Press OK The Avoid Area is deleted Deleting All Avoid Areas From the Main Menu select the Settings option t From the Settings screen select the My Data option From the My Data screen select the Clear Data option The Settings Clear Data screen will display a OO N Use the 8 way toggle to select the Clear Avoid Areas button e Select Yes and press OK to accept the W
49. y time and is accurate to within 5 m 15 ft Your ICN map provides street level detail for door to door navigation including Points Of Interest POIs such as accomodation railway stations and airports Use this guide to learn how to operate it effectively and safely plus find out all of the different features available to you GPS and GPS Signals The Global Positioning System GPS is a network of satellites that transmit accurate time and position information worldwide GPS receivers receive signals from these satellites and use the information to determine an exact location Satellites orbit the Earth at around 12 000 miles While a GPS receiver can detect signals from up to 12 satellites at anytime only three are needed to provide a position or fix latitude and longitude for vehicle navigation systems The iCN GPS antenna receives GPS signals To receive GPS signals ensure the iCN is outdoors or in a vehicle outdoors and the GPS antenna has an unobstructed view of the sky The iCN can operate in all weather types except snowfall Safety Notice In a vehicle it is your sole responsibility to place secure and use the iCN in a manner that will not cause accidents personal injury or property damage The user of this product is solely responsible for observing safe driving practices It is your sole responsibility that the vehicle mount installation instructions are read carefully understood and used consistent with the laws

Navman iCN 600series User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents