NAD Electronics T 572 User's Manual
Contents
1. 20 Programmed Playback with MP3 Disc 21 Programmed Playback with MP3 Disc 21 e Repeat Programmed Tracks All 21 e Erasing a Track from Program List 21 e Erasing the Complete Program List 21 Additional Information 22 Last Condition Memory 22 Screen SaVer 22 Video Mode Setting 22 HDCD Playback 22 Reference Troubleshooting 23 Language Code List 24 Country Code LiSt 25 Specifications 26 About the symbols for instructions A Indicates hazards likely to cause harm to the unit itself or other material damage Indicates special operating features of this unit Indicates tips and hints for making the task easier EVP dike dee MP3 r VIDE o DIGITAL VIDEO DIGITAL AUDIO dts DU potsy Surround DIGITAL Sound Before Use Playable Discs DVD DVD Video VIDEO 8 cm 12 cm disc COMPACT Video CD VCD 8 cm 12 cm disc COMPACT Audio CD DIGITAL AUDIO 8 cm 12 cm disc In addition this unit can play a HDCD CD R or CD RW that contains audio titles or MP3 files Notes Depending on the conditions of the recording equip ment or the CD R RW disc itself some CD R RW discs cannot be played on this unit This unit cannot pla2. The DVD Player can play MP3 formatted recordings on CD ROM CD R or CD RW discs Before playing MP3 recordings read the notes on MP3 Recordings on right Insert a disc and close the tray The menu appears on the TV screen MP3 Program E TRACK 1 MP3 TRACK 2 MP3 TRACK 3 MP3 TRACK 4 MP3 TRACK 5 MP3 TRACK 6 MP3 TRACK 7 MP3 TRACK 8 MP3 S Clear All m 00 00 T1 OFF MP3 menu Press A V to select a track then press PLAY Playback starts During playback the current track s elapsed playing time will appear on the display Playback will stop at the end of the disc 3 To stop playback at any other time press STOP Pause D 1 Press PAUSE STEP during playback 2 To return to playback press PLAY or press PAUSE STEP again Moving to another Track GD e Press SKIP k lt or BPI once during playback to advance to the next track or to return to the beginning of the current track e Press SKIP kK twice briefly to step back to the pre vious track Repeat Track All Off D 1 To repeat the track currently playing press REPEAT The Repeat Track icon appears on the menu screen 2 To repeat all tracks on a disc press REPEAT a sec ond time The Repeat All icon appears on the menu screen 3 To cancel Repeat mode press REPEAT a third time The Repeat Off icon appears on the menu screen Notes on MP3 Discs About MP3 e An MP3 file is audio data compressed by using the MPEG1 audio layer 3 file coding
3. Paraguay YT Mayotte DM Dominica KP North Korea QA Qatar YU Yugoslavia DO Dominican Republic KR South Korea RE Reunion French ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman Islands RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands Specifications General Power requirements Power consumption Dimensions approx Mass approx Operating temperature Operating humidity System Laser Signal system Frequency response Signal to noise ratio Harmonic distortion Dynamic range Outputs VIDEO OUT S VIDEO OUT AC 120V 60 Hz 16W 430 X 118 X 408 mm 16 9 x 4 7 x 16 1 inches w x h x d 5 7 kg 12 6 Ibs 5 C to 40 C 41 F to 104 F 5 to 90 Semiconductor laser wavelength 650 nm PAL NTSC DVD PCM 96 kHz 8 Hz to 44 kHz DVD PCM 48 kHz 8 Hz to 22 kHz CD 8 Hz to 20 kHz More than 100dB ANALOG OUT connectors only Less than 0 008 More than 100 dB DVD More than 95 dB CD 1 Vp p 75 Q sync negative RCA jack x 1 SCART TO TV Y 1 0 V p p 75 Q negative sync Mini DIN 4 pin x 1 C 0 3 V p p 75 Q Audio output digital audio Audio output optical audio Audio output analog audio 0 5 V p p 75 Q RCA jack x 1 5 V p p 75 Q Optical connector x 1 2 0 Vrms 1 KHz 0 dB 330 Q RCA jack L R x 1 SCART TO TV Accessory Video c
4. Player to the video in jack on the TV using the video cable supplied V Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left right in jacks on the TV A using the supplied audio cables S Video connection Better Connect the S VIDEO OUT jack on the DVD Player to the S Video in jack on the TV using an optional S Video cable S Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left right in jacks on the TV A using the supplied audio cables SCART connection Connect the TO TV scart jack on the DVD Player to the corresponding in jacks on the TV using the scart cable m Note For using SCART s RGB signal set the Video Output Select switch to COMPONENT Rear of TV SCART INPUT AUDIO INPUT Ker aa 0000000000 A Vv S T j E i 9 P SCAFT RGB OUT coco A DO00V00000 cit ower OOO0000000 DIGITAL out Rear of DVD player Note If the TV has an S video input connect the DVD player with the S video cable When using an S video cable do not connect the yellow video cable Connections Continued Connecting to Optional Equipment Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround Connect the Left and Right AUDIO OUT jacks on the DVD Player to the audio left and right in jacks on your amplifier receiver or stereo system using t
5. Repeat of entire all disc contents press REPEAT a third time The Repeat All icon appears on the TV screen 4 To exit Repeat mode press REPEAT a fourth time The Repeat Off icon appears on the TV screen Note On a Video CD with PBC you must set PBC to Off on the setup menu to use the Repeat function See page 13 Repeat A B To repeat a sequence in a title 1 Press A B at your chosen starting point A appears briefly on the TV screen 2 Press A B again at your chosen end point A B appears briefly on the TV screen and the repeat sequence begins a b repeat appears on the player s display 3 To cancel the sequence press A B Time Search Ga OQ The Time Search function allows you to start playing at any elapsed time location on the disc 1 Press DISPLAY during playback The on screen dis play appears on the screen The Time Search box shows the elapsed playing time of the current disc 2 Within 10 seconds press A F to select the Time Search icon in the on screen display The appears in the Time Search box 3 Within 10 seconds use the number buttons to enter the required start time Enter hours minutes and sec onds from left to right in the box If you enter the wrong numbers press CLEAR to remove the numbers you entered Then enter the correct numbers 4 Within 10 seconds press SELECT ENTER to confirm the start time Playback starts from the selected time on the disc If you enter an
6. discs played with alternative scenes Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language 1 gt Unlock Digital Audio Output Change Others Select Rating on the Setup menu using the A and V buttons 2 While Rating is displayed press P When you have not entered a password yet Install a 4 digit password using the number buttons to create a personal 4 digit security password then press SELECT ENTER Enter the 4 digit password again and press SELECT ENTER to verify When you have already entered a password Install your 4 digit password using the number buttons to confirm the personal 4 digit security password then press SELECT ENTER If you make a mistake before pressing SELECT ENTER press CLEAR and install your 4 digit security password again 4 Select a rating from 1 to 8 using the A F but tons One 1 has the least playback restrictions Eight 8 has the most playback restrictions Unlock If you select Unlock Parental Control is not active The disc will play without restrictions Ratings 1 to 8 Some discs contain scenes not suitable for children If you set a rating for the play er all disc scenes with the same rating or lower will be played Higher rated scenes will not be played unless an alternative scene is available on the disc The alternative must have the same rating or a lower one If no suitable alternative is found playback will stop You
7. invalid time playback will continue from the current point iad so sun 3D Surround ci vom This unit can produce a 3D Surround effect which simulates multi channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to listen to multi channel audio from a home theater system 1 Press SOUND to select 3D SUR during playback 2 To turn off the 3D Surround effect press SOUND again to select NORM Zoom The Zoom function allows you to expand the video image and to move the focus point of zoomed image 1 Press ZOOM during playback or still playback to acti vate the Zoom function If you press ZOOM repeatedly the magnification level increases up to six times 2 Use the lt A buttons to move the focus point off the zoomed image 3 Press CLEAR to resume normal playback or return to the paused image Notes e The zoom function may not work for some DVDs e The zoom function may not work on multi angle scenes Operation with DVD Video CD and Audio CD Continued General Features cont d Marker Search You can start playback from a memorized point Up to nine points can be memorized To enter a mark follow these steps 1 During disc playback press MARKER at the location you want to memorize The Marker icon will appear on the TV screen briefly 2 Repeat step 1 to enter up to nine Marker points on a disc TASASEKS Lal To Reca
8. num bered buttons 0 9 Note For two digit numbers press the buttons in rapid succession Still Picture and Frame by frame playback 1 Press PAUSE STEP during playback The player will now go into PAUSE mode 2 You can advance the picture frame by frame by pressing PAUSE STEP repeatedly on the remote control Pause 1 Press PAUSE STEP during playback 2 To return to playback press PLAY or press PAUSE STEP again Slow Motion 1 Press SLOW lt I or I gt during playback The player will enter SLOW mode 2 Use the SLOW lt I or I gt to select the required speed lt I 1 16 dl 1 8 Al 1 4 or lt l 1 2 reverse or I gt 1 16 I gt 1 8 I gt 1 4 or I gt 1 2 forward 3 To exit slow motion mode press PLAY Note Slow motion playback in reverse is not available from a Video CD Search 1 Press SCAN lt lt or gt gt during playback The player will now go into SEARCH mode 2 Press SCAN lt lt or gt gt repeatedly to select the required speed 4X2 4X4 44X16 444X100 backward or PP X2 gt gt X4 gt gt X16 PP X100 forward With a Video CD and Audio CD the Search speed changes 4X2 41X4 lt lt X8 backward or PP X2 PP X4 PP X8 forward 3 To exit SEARCH mode press PLAY Random 1 Press RANDOM during playback or in stop mode The unit automatically begins Random Playback and RANDOM 1 3 appears on the TV screen e RANDOM1 Plays all the tracks on a single disc in random or
9. pass word follow the procedure below 1 Press SETUP to display the setup menu 2 Use the Number buttons to enter the 6 digit number 210499 The 4 digit password is cleared P CLr appears on the dis play The message will appear if the disc tray is closed It will be on the display until you try another feature 3 Enter a new code as shown above to the left Rating Operation with DVD Video CD and Audio CD Playing a DVD Video CD and Audio CD Cf Playback Setup e Turn on the TV and select the video input source corresponding to the DVD player e Audio system Turn on the audio system and select the input source connected to the DVD player 7 Press OPEN CLOSE to open the disc tray Load your disc in the tray with the label facing up When a double sided DVD is inserted make sure the side you want to play is facing down e Discs can be loaded one at a time by pressing NEXT DISC to rotate the carousel Press OPEN CLOSE to close the tray READING appears on the TV screen and playback starts automatically If playback does not start press PLAY In some cases the disc menu may appear instead T a disc menu screen is displayed The menu screen may be displayed first after loading a DVD or Video CD that contains a menu DVD Use the 4 gt A VW buttons to select the title chapter and additional selections you want then press SELECT ENTER to start playback Press TITLE or MENU to return to the disc men
10. remote control is too far from the DVD player e There is an obstacle in the path of the remote control and the DVD player e The batteries in the remote control are exhausted e Clean the disc e Cancel the Rating function or change the rating level e Point the remote control at the remote sensor of the DVD player e Operate the remote control within about 23 ft 7 m e Remove the obstacle e Replace the batteries with new ones Language Code List Enter the appropriate code number for the initial settings Disc Audio Disc Subtitle and or Disc Menu See page 12 Code Language Code Language Code Language Code Language 6565 Afar 7079 Faroese 7678 Lingala 8375 Slovak 6566 Abkhazian 7082 French 7679 Laothian 8376 Slovenian 6570 Afrikaans 7089 Frisian 7684 Lithuanian 8377 Samoan 6577 Ameharic 7165 Irish 7686 Latvian Lettish 8378 Shona 6582 Arabic 7168 Scots Gaelic 7771 Malagasy 8379 Somali 6583 Assamese 7176 Galician 7773 Maori 8381 Albanian 6588 Aymara 7178 Guarani 7775 Macedonian 8382 Serbian 6590 Azerbaijani 7185 Gujarati 7776 Malayalam 8385 Sudanese 6665 Bashkir 7265 Hausa 7778 Mongolian 8386 Swedish 6669 Byelorussian 7273 Hindi 7779 Moldavian 8387 Swahili 6671 Bulgarian 7282 Croatian 7782 Marathi 8465 Tamil 6672 Bihari 7285 Hungarian 7783 Malay 8469 Telugu 6678 Bengali Bangla 7289 Armenian 7784 Maltese 8471 Tajik 6679 Tibet
11. D00000 AUDIO DIGITAL e o o an OPTICAL COAXIAL DIGITAL INPUT _auoio input DIGITAL INPUT Amplifier Receiver Note This player does not perform internal 2 channel decoding of a DTS sound track To enjoy DTS multi channel surround you must connect this player to a DTS compatible receiver via one of this player s digital audio outputs Before Operation General Explanation This manual gives basic instructions for operating the DVD Player Some DVDs require specific operation or allow only limited operation during playback When this occurs the symbol appears on the TV screen indi cating that the operation is not permitted by the DVD Player or is not available on the disc On Screen Display General playback status can be displayed on the TV screen Some items can be changed on the menu On screen display operation 7 Press DISPLAY during playback Press A or V to select an item The selected item will be highlighted Press lt or P gt to change the setting of an item The number buttons can be also be used for setting numbers e g title number For some functions press SELECT ENTER to execute the setting Repeat mode Icons D m Repeat Title Dew Repeat Chapter Dm Repeat Track non PBC Video CDs and Audio CD only D u Repeat All Tracks non PBC Vide
12. DVDs are automatically set to these standards There are many different types of recordable disc formats including CD R containing MP3 files That require certain pre existing conditions see above to insure compatible playback Customers should also note that permission is required in order to download MP3 files and music from the Internet NAD cannot grant such permission Permission should always be sought from the copyright owner Programmed Playback with MP3 Disc Programmed Playback with MP3 Disc Program allows you to store your favorite tracks for a particular disc in the player memory Program can contain 60 tracks Insert the disc and close the tray The menu is displayed on the TV screen Press PROGRAM during playback or in the stop mode to enter the Program Edit mode The El mark will appear to the right of the word Program on the right side of the menu screen Note Press PROGRAM to exit the Program Edit mode the IE mark will disappear Press A V to select a track then press SELECT ENTER to place the selected track on the Program list Repeat step 3 to place additional tracks on the Program list MP3 Program E TRACK 1 MP3 TRACK 2 MP3 TRACK 3 MP3 TRACK 4 MP3 TRACK 5 MP3 TRACK 6 MP3 TRACK 7 MP3 TRACK 8 MP3 TRACK 8 MP3 TRACK 2 MP3 TRACK 4 MP3 TRACK 3 MP3 Clear All eca m 00 00 Pi Dorr MP3 menu Press P The programmed tr
13. V normal color Do not touch the inner pins of the jacks on the rear picture may not be displayed panel Electrostatic discharge may cause permanent e Set System Select switch when the power is turned damage to the unit off D Connections Clips e Depending on your TV and other equipment you wish to connect there are various ways you could connect the player Use only one of the connections described below e Please refer to the manuals of your TV VCR Stereo System or other devices as necessary to make the best connections e For better sound reproduction connect the player s AUDIO OUT jacks to the audio in jacks of your amplifier receiver stereo or audio video equipment See Connecting to optional equipment on page 10 A Caution Make sure the DVD Player is connected directly to the TV Select the TV to the corresponding video input Do not connect the DVD Player s AUDIO OUT jack to the phono in jack Turntable of your audio system Do not connect your DVD Player via your VCR The DVD image could be distorted by the copy protection system Connecting to a TV e Make one of the following connections depending on the capabilities of your existing equipment e When using the SCART s RGB signal set the Video Output Select switch to COMPONENT When using the S VIDEO OUT jack set the Video Output Select switch to S VIDEO Video connection Good Connect the VIDEO OUT jack on the DVD
14. able 1 Audio cable 1 Remote control 1 BatterieS see ei eee es 2 e Design and specifications are subject to change without notice Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Confidential unpublished works Copyright 1992 1997 Dolby Laboratories All rights reserved DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc P NO 3834RS Printed in China
15. ack you selected last is highlighted on the program list Press A V to select the track you want to start playing Press TITLE to move to the next page Press MENU to move to the previous page Press PLAY to start Playback begins in the order in which you programmed the tracks and PROG appears in the display window Playback stops after all of the tracks on the Program list have played once Note The programmed tracks are cleared when the power is turned off or the disc is removed Repeat Programmed Tracks All e To repeat the track currently playing press REPEAT The Repeat Track icon appears on the menu screen e To repeat all tracks on the program list press REPEAT a second time The Repeat All icon appears on the menu screen e To cancel Repeat mode press REPEAT a third time The Repeat Off icon appears on the menu screen Erasing a Track from Program List 1 Press PROGRAM during playback or in the stop mode to enter the Program Edit mode The E mark will appear 2 Press to move to the Program list 3 Use A to select the track that you wish to erase from the Program list 4 Press CLEAR The track will be erased from the Program list Erasing the Complete Program List 1 Follow steps 1 2 of Erasing a Track from Program List as above 2 Use A F to select Clear All then press SELECT ENTER The complete Program for the disc will be erased The programs are also clea
16. ahamas GY Guyana MZ Mozambique TO Tonga BT Bhutan HK Hong Kong NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia French TR Turkey BW Botswana Islands NE Niger TT Trinidad and Tobago BY Belarus HN Honduras NF Norfolk Island TV Tuvalu BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos Keeling Islands HU Hungary NL Netherlands UA Ukraine CF Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United Kingdom CH Switzerland IL Israel NR Nauru UM USA Minor Outlying CI Ivory Coast IN India NU Niue Islands CK Cook Islands IO British Indian Ocean NZ New Zealand US United States CL Chile Territory OM Oman UY Uruguay CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican City State CO Colombia IS Iceland PF Polynesia French VC Saint Vincent amp CR Costa Rica IT Italy PG Papua New Guinea Grenadines CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG Virgin Islands British CV Cape Verde JP Japan PL Poland VI Virgin Islands USA CX Christmas Island KE Kenya PM Saint Pierre and Miquelon VN Vietnam CY Cyprus KG Kyrgyzstan PN Pitcairn Island VU Vanuatu CZ Czech Republic KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands DE Germany KI Kiribati PT Portugal WS Samoa DJ Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts amp Nevis Anguilla PY
17. an 7365 Interlingua 7789 Burmese 8472 Thai 6682 Breton 7378 Indonesian 7865 Nauru 8473 Tigrinya 6765 Catalan 7383 Icelandic 7869 Nepali 8475 Turkmen 6779 Corsican 7384 Italian 7876 Dutch 8476 Tagalog 6783 Czech 7387 Hebrew 7879 Norwegian 8479 Tonga 6789 Welsh 7465 Japanese 7982 Oriya 8482 Turkish 6865 Danish 7473 Yiddish 8065 Panjabi 8484 Tatar 6869 German 7487 Javanese 8076 Polish 8487 Twi 6890 Bhutani 7565 Georgian 8083 Pashto Pushto 8575 Ukrainian 6976 Greek 7575 Kazakh 8084 Portuguese 8582 Urdu 6978 English 7576 Greenlandic 8185 Quechua 8590 Uzbek 6979 Esperanto 7577 Cambodian 8277 Rhaeto Romance 8673 Vietnamese 6983 Spanish 7578 Kannada 8279 Rumanian 8679 Volap k 6984 Estonian 7579 Korean 8285 Russian 8779 Wolof 6985 Basque 7583 Kashmiri 8365 Sanskrit 8872 Xhosa 7065 Persian 7585 Kurdish 8368 Sindhi 8979 Yoruba 7073 Finnish 7589 Kirghiz 8372 Serbo Croatian 9072 Chinese 7074 Fiji 7665 Latin 8373 Singhalese 9085 Zulu Country Code List Enter the appropriate code number for the initial setting Country Code See page 14 Code Country Code Country Code Country Code Country AD Andorra ER Eritrea LC Saint Lucia SC Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF Afghanistan ET Ethiopia LK Sri L
18. and not available to others You should record requested information here and retain this guide as a permanent record of your purchase Model No Serial No Table of Contents Introduction Safety Precautions 2 Table of Contents 3 Before Use 0 0 cece cece eee ee eee 4 5 Playable Discs 4 Precautions so se Le spe 40 Se ees wae ede eee 5 Notes on Discs 5 About Symbols 5 Front Panel and Display Window 6 Remote Control 7 Rear Panel 0 0c cece cece eee eee eee 8 Preparation ConnectiOnS 9 10 Connecting to ATV 9 Connecting to Optional Equipment 10 Before Operation 11 14 General Explanation 11 On Screen Display 11 Initial Settings 12 14 e Initial Settings General Operation 12 Language 12 CPU ke i eh Boe EA ee ge 12 SOUND ena is oe Ree ae en oO 13 e Others 13 e Parental Control 14 Operation Operation with DVD Video CD and Audio CD 15 18 Playing a DVD Video CD and Audio CD 15 e Exchanging discs during playback 15 e Skipping discS 15 e Exchanging the disc and starti
19. anka SE Sweden AG Antigua and Barbuda FI Finland LR Liberia SG Singapore Al Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan Mayen AN Netherlands Antilles FO Faroe Islands LV Latvia Islands AO Angola FR France LY Libya SK Slovak Republic AQ Antarctica FX France European MA Morocco SL Sierra Leone AR Argentina Territory MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE Georgia MK Macedonia ST Saint Tome and Principe AZ Azerbaidjan GF French Guyana ML Mali SU Former USSR BA Bosnia Herzegovina GH Ghana MM Myanmar SV El Salvador BB Barbados Gl Gibraltar MN Mongolia SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique French TD Chad BG Bulgaria GP Guadeloupe French MR Mauritania TF French Southern BH Bahrain GQ Equatorial Guinea MS Montserrat Territories BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S Georgia amp S Sandwich MU Mauritius TH Thailand BM Bermuda Isls MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam USA MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY Malaysia TN Tunisia BS B
20. der and then stops e RANDONW2 Plays all the tracks on current disc in random order and then plays all the tracks on each suc ceeding disc in random order and then stops e RANDOMS Plays 2 tracks randomly from a disc and then plays 2 tracks randomly from a different disc until all tracks on all discs have been played 2 To return to normal playback press RANDOM until RANDOM disappears on the display window Cf tip By pressing SKIP It or gt gt I during Random play back the unit selects another title track and resumes Random playback Note This function works only with Compact Discs Karaoke discs and video CD without PBC Operation with DVD Video CD and Audio CD Continued General Features cont d Repeat D CHAPT D TITLE D TRACK 2 DISC D ALL D OFF DVD Video Discs Repeat Chapier Title Off 1 To repeat the chapter currently playing press REPEAT The Repeat Chapter icon appears on the TV screen 2 To repeat the title currently playing press REPEAT a second time The Repeat Title icon appears on the TV screen 3 To exit Repeat mode press REPEAT a third time The Repeat Off icon appears on the TV screen Video CDs and Audio CDs Repeat Track Disc All Off 1 To repeat the track currently playing press REPEAT The Repeat Track icon appears on the TV screen 2 To repeat the disc currently playing press REPEAT a second time The Repeat Disc icon appears on the TV screen 3 To
21. e quality is improved e Video mode change sequence MODE1 MODE2 MODE3 MODE4 MODE5 MODE1 e If you turn off the power the video mode will return to initial default state Auto HDCD Playback HDCD is a process that increases the fidelity of both specially encoded HDCD discs and standard CD audio discs When an HDCD encoded disc is playing the spe cial decoder is automatically activated and the HDCD Indicator lights No user intervention is required To enjoy the benefits of HDCD your DVD Player must be connected to your A V receiver via the Analog Audio Outputs However if your A V receiver or surround processor is equipped with built in HDCD decoding you may also use a Coaxial or Optical digital audio connec tion so that the HDCD processing is done there Troubleshooting Check the following guide for the possible cause of a problem before contacting service Symptom No power The power is on but the DVD player does not work Cause e The power cord is disconnected e No disc is inserted Correction e Plug the power cord into the wall outlet securely e Insert a disc Check that the DVD or audio CD indicator in the display window is lit No picture e The TV is not set to receive DVD signal e Select the appropriate video input mode output on the TV so the picture from the DVD player appears on the TV screen e The video cable is not connected e Connect the
22. eaning the unit To clean the cabinet Use a soft dry cloth If the surfaces are extremely dirty use a soft cloth lightly moistened with a mild detergent solution Do not use strong solvents such as alcohol benzine or thinner as these might damage the surface of the unit To obtain a clear picture The DVD player is a high tech precision device If the optical pick up lens and disc drive parts are dirty or worn down the picture quality will be poor Regular inspection and maintenance are recommended after every 1 000 hours of use This depends on the operating environment For details please contact your nearest dealer Notes on Discs Handling discs Do not touch the playback side of the disc Hold the disc by the edges so that fingerprints will not get on the surface Do not stick paper or tape on the disc Storing discs After playing store the disc in its case Do not expose the disc to direct sunlight or sources of heat or leave it in a parked car exposed to direct sun light as there may be a considerable temperature build up inside the car Cleaning discs Fingerprints and dust on the disc can cause poor pic ture quality and sound distortion Before playing clean the disc with a clean cloth Wipe the disc from the cen ter out O x Do not use strong solvents such as alcohol benzine thinner commercially available cleaners or anti static spray intended for older vinyl records About Symbo
23. ein may result in hazardous radiation exposure To prevent direct exposure to laser beam do not try to open the enclosure Visible laser radiation when open DO NOT STARE INTO BEAM CAUTION The apparatus shall not be exposed to water drip ping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89 336 EEC 93 68 EEC and 73 23 EEC P notes on copyrights It is forbidden by law to copy broadcast show broadcast via cable play in public or rent copyright material without permission This product features the copy protection function developed by Macrovision Copy protection signals are recorded on some discs When recording and playing the pictures of these discs on a VCR the picture noise will appear This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection tech nology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited SERIAL NUMBER The serial number is found on the back of this unit This number is unique to this unit
24. elected Repeat steps 3 to 4 Up to 20 tracks can be programmed Press PLAY to exit the menu The selected tracks are stored in the player memory and playback begins with the first programmed sequence After playback of all programmed tracks is com pleted playback is stopped Clip After playback of all programmed tracks is completed playback is stopped Repeat Programmed Tracks All e To repeat the track currently playing press REPEAT The Repeat Track icon appears on the menu screen e To repeat all tracks on the program list press REPEAT a second time The Repeat All icon appears on the menu screen e To cancel Repeat mode press REPEAT a third time The Repeat Off icon appears on the menu screen To resume normal playback from programmed playback Press and hold PROGRAM until PROG indicator dis appears in the display window Erasing a Track from Program List 1 Press PROGRAM while playback is stopped The Program menu will appear 2 Use lt a to select the track that you wish to erase from the Program list 3 Press CLEAR The track will be erased from the Program list Erasing the Complete Program List 1 Press PROGRAM while playback is stopped The Program menu will appear 2 Use lt a to select Clear All then press SELECT ENTER The complete Program for the disc will be erased The programs are also cleared when the disc is removed Operation with MP3 Disc Playing an MP3 disc
25. g on how you connected the DVD Player to the TV S VIDEO OUT Connect to a TV with S Video inputs VIDEO OUT Connect to a TV with video inputs System Select switch 12V TRIGGER IN By connecting this DVD player to another NAD audio component or system controller equipped with a 12V trigger output you can remotely operate the T572 power ON OFF 000000 AC Power Cord Plug into the power source COAXIAL Digital audio OPTICAL Digital audio out jack out jack Connect to digital optical audio equipment Connect to digital coaxial audio equipment ANALOG AUDIO OUT Left Right Connect to an amplifier receiver or stereo system Dust protection cap Remove the dust protection cap from the OPTICAL DIGITAL OUT jack and connect the optical digital cable not supplied securely so that the configurations of both the cable and the connector match Keep the dust protection cap and always reattach the cap when not using the connector to protect against dust intrusion System Select switch You can enjoy NTSC or PAL discs by using System Select switch to choose the appropriate system PAL Select when DVD player is connected with PAL TV NTSC Select when DVD player is connected with NTSC TV AUTO Select when DVD player is connected with Multi system TV e When the selected System Select switch does not coincide with the system of your T
26. he supplied audio cables A Connecting to an amplifier equipped with two channel digital stereo PCM or to an Audio Video receiver equipped with a multi channel decoder Dolby Digital MPEG 2 or DTS Connect one of the DVD Player s DIGITAL AUDIO OUT jacks OPTICAL O or COAXIAL X to the cor responding in jack on your amplifier Use an option al digital optical O or coaxial X audio cable You will need to activate the player s digital output See Digital Audio Output on page 13 Digital Multi channel sound A digital multi channel connection provides the best sound quality For this you need a multi channel Audio Video receiver that supports one or more of the audio formats supported by your DVD Player MPEG 2 Dolby Digital and DTS Check the receiver manual and the logos on the front of the receiver Notes If the audio format of the digital output does not match the capabilities of your receiver the receiver will produce a strong distorted sound or no sound at all Six Channel Digital Surround Sound can only be obtained if your receiver is equipped with a Digital Multi channel surround sound decoder To confirm the audio format of the current DVD selection display press AUDIO Repeated pressing of the AUDIO button may allow you to select between various audio formats available on the disc Rear of DVD player ViDEO OUT ScARTIRGB SCARTIRGB OUT E 0000000000 our QOD00
27. isc Tray Insert a disc here Switches the player ON and OFF Press for fast reverse search or forward search TITLE Display window Shows the current status of the player OPEN CLOSE 4 Opens or closes the disc tray Moves to the next available disc tray STOP W Stops playback SCAN 4a PP NEXT DISC Indicates current title number CHP TRK Indicates current chapter or track number back active mode Indicates total playing time elapsed time PROG Programmed playback active RANDOM RANDOM play Indicates repeat Remote Control POWER Switches DVD Player ON and OFF SETUP Accesses or removes setup menu REPEAT Repeat chapter track title all A Be Repeat sequence RANDOM e Plays tracks in random order TITLE Displays the discs Title menu if available lt gt a Y left right up down Selects an item in the menu DISPLAY Accesses On Screen display ZOOM e Enlarges video image MARKER e Marks any point during playback SEARCH Displays MARKER SEARCH menu NEXT DISC Moves to the next available disc tray PAUSE STEP II Pauses playback temporarily press repeatedly for frame by frame playback Reverse SLOW 4 Reverse slow playback Forward SLOW D Forward slow playback CLEAR Removes a track number on the program menu or a mark on the MARKER SEARCH menu Remote C
28. iy T 572 DVD CD MP3 Player 00GD0 O00 0 FEED me merana dis poma des GB Owner s Manual Safety Precautions RISK OF ELECTRIC SHOCK DO NOT OPEN Az WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product WARNING TO REDUCE THE RISK OF FIRE OR ELEC TRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER CAUTION This Digital Video Disc Player employs a Laser System To ensure proper use of this product please read this owner s manual carefully and retain for future reference should the unit require maintenance contact an authorized service location see service procedure Use of controls adjustments or the performance of procedures other than those specified her
29. lect ed Other To select another language enter the 4 digit number corresponding to the language code list on page 24 If you enter the wrong language code press CLEAR Disc Audio _ yOriginal Disc Subtitle English Disc Menu French Rating German Country Code Spanish TV Aspect Italian Menu Language Chinese Polish Digital Audio Output Hungarian Russian Others Other Menu Language Select a language for the setup menu This is the menu you see when you press SETUP vEnglish Spanish French Disc Audio Disc Subtitle Disc Menu Rating German Country Code Italian TV Aspect Menu Language Digital Audio Output Others Picture TV Aspect 4 3 Letterbox Select when a standard 4 3 TV is con nected Displays theatrical images with masking bars above and below the picture 4 3 Panscan Select when a standard 4 3 TV is con nected Displays pictures cropped to fill your TV screen Both side of the original picture may be cut off 16 9 Wide Select when a 16 9 wide TV is connected Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language 7 Digital Audio Output Others v 4 3 Letterbox 4 3 Panscan 16 9 Wide Before Operation Continued Sound Digital Audio Output Each DVD disc may have a variety of audio output options Set the player s Digital Audio Output according to the type of audio system you u
30. ll a Marked Scene 1 During disc playback press SEARCH The MARKER SEARCH menu will appear on the screen 2 Within 10 seconds press lt gt to select a Marker num ber that you want to recall 3 Press SELECT ENTER Playback will start from the Marked scene 4 To remove the MARKER SEARCH menu press SEARCH To clear a Marked Scene 1 During disc playback press SEARCH The MARKER SEARCH menu will appear on the screen 2 Press lt to select the Marker number that you want to erase 3 Press CLEAR The Marker number will be erased from the list 4 Repeat steps 2 and 3 to erase additional Marker numbers 5 To remove the MARKER SEARCH menu press SEARCH Note All disc markers are cleared when the power is turned off or the disc is removed Special DVD Features Checking the contents of DVD Video discs Menus DVDs may contain menus that allow you to access spe cial features To access the disc menu press MENU Then press the appropriate number button to select an option Or use the lt a buttons to highlight your selection then press SELECT ENTER Title Menu 1 Press TITLE If the current title has a menu that menu will appear on the screen Otherwise the disc menu may appear 2 The menu can list camera angles spoken language and subtitle options and chapters for the title 3 To remove the title menu press TITLE again Disc Menu 1 Press MENU The disc menu is displayed 2 To exit the disc me
31. ls About the symbol display may appear on the TV screen during operation This icon means the function explained in this owner s manual is not available on that specific DVD video disc About the disc symbols for instructions When a section in this manual includes the following icons the data provided herein is applicable only to the software represented by that icon DVD Video CDs with the PBC playback control function Video CDs without the PBC playback control function Audio CDs CIP MP3 disc Front Panel and Display Window STANDBY ON indicator RANDOM Plays tracks in random order REPEAT Repeat chapter track title Disc all DVD CD MP3 5 Disc Phangey T 572 Rabon 5 Lights red when the player is in Standby mode off Moves to PREVIOUS or NEXT chapter track DA V left right up down ENTER Selects an item in the menu Acknowledges menu selection MENU Accesses menu on a DVD disc Starts playback SKIP kaa gt STOP a Stops playback PLAY gt POWER ig ANGLE Lights when multi angles are present A light will appear if a disc is in the disc tray The current disc tray flashes DVD inserted CD Audio CD inserted VCD Video CD inserted HD CD HDCD disc inserted MP3 MP3 disc inserted Indicates current player function Playback Pause etc Remote Sensor Point the DVD Player remote control here D
32. must enter your 4 digit password or change the rating level in order to play the disc Press SELECT ENTER to confirm your rating selection then press SETUP to exit the menu D Country Code Enter the code of a country area whose standards were used to rate the DVD video disc referring to the list See Country Code List page 25 Disc Audio Code Set Disc Subtitle U S Disc Menu Rating TV Aspect Menu Language Digital Audio Output Others Select Country Code using the A buttons on the setup menu 2 While Country Code is selected press P 3 Follow step 3 of Rating on left 4 Select the first character using the A V buttons Shift the cursor using 4 gt buttons and select the second character using A V buttons Press SELECT ENTER to confirm your country code selection then press SETUP to exit the menu Note Confirmation of your 4 digit password is necessary when the code is changed see Changing the 4 digit code below Changing the 4 digit code 1 Follow Steps 1 2 as shown above to the left Rating 2 Install your old code then press SELECT ENTER 3 Select Change using the A V buttons then press SELECT ENTER 4 Install the new 4 digit code then press SELECT ENTER 5 Install exactly the same code a second time and veri fy by pressing SELECT ENTER 6 Press SETUP to exit the menu If you forget your 4 digit code If you forget your password to clear the current
33. nction Press A V to select desired item Selection Method Track Number Displays the current track number total number of tracks 4 P or Numbers Ir We and PBC On mode and skips to the desired track number SELECT ENTER Time 0 16 57 Displays the elapsed playing time Display only _ Audio Channel Displays the audio channel and R STER changes you make to the audio channel pd Sound ad NORM Displays the current sound mode and lt gt any changes you make to the setting Before Operation Continued Initial Settings You can install your own Personal Preferences Initial Settings General Operation Press SETUP The setup menu appears Disc Audio vOriginal Disc Subtitle Disc Menu Rating Country Code TV Aspect Italian Chinese Polish English French German Spanish Menu Language Hungarian Digital Audio Output Russian Others Other Press A V to select the desired item The screen will display the current setting for the selected item as well as alternate setting s While the desired item is displayed press gt then A F to select the desired setting Press SELECT ENTER to confirm your selection Some items require additional steps Press SETUP RETURN or PLAY to exit the setup menu Language Disc Language Select a language for the disc s Menu Audio and Subtitle Original The original language included on the disc is se
34. ng playback 15 General FeatureS 16 e Moving to another TITLE 16 e Moving to another CHAPTER TRACK 16 e Still Picture and Frame by Frame Playback 16 PaQUSC eaa pe he eed Lake ghd 16 e Slow Motion 16 Seah oor aeee ahh EEEE EE ew oe E E eR 16 Random 16 Repeat cc babe i Sav ge gee da bids iaaes 17 e Repeat AB 17 e Time Search 17 e Selecting the sound enhancement 17 ZOOM oh eben bd ai de Lada da 2 SAN 17 e Marker Search 18 Special DVD FeaturesS 18 eTitleMenu 18 e Disc Menu 18 e Camera Angle 18 e Changing the Audio Language 18 e Changing the Audio Channel 18 e Subtitles 18 Programmed Playback with Video CD and Audio CD sassi a daaa da eg a 19 Programmed Playback with Video CD and Audio CD 19 e Repeat Programmed Tracks All 19 e Erasing a Track from Program List 19 e Erasing the Complete Program List 19 Operation with MP3 Disc 20 Playing an MP3 Disc 20 PAUSC eon ois Gk eri A Gok Ba Nw ote yh 20 e Moving to another Track 20 e Repeat TrackK AIVOff 20 Notes on MP3 Discs
35. nu press MENU again Camera Angle If the disc contains scenes recorded at different camera angles you can change to a different camera angle during playback e Press ANGLE repeatedly during playback to select a desired angle The number of the current angle appears on the display Changing the Audio Language TENG R oop 6 CH Press AUDIO repeatedly during playback to hear different audio languages or audio tracks available on the disc Changing the Audio Channel B B R RIGHT Press AUDIO repeatedly during playback to hear a dif ferent audio channel STEREO LEFT or RIGHT Subtitles Eh m Press SUBTITLE repeatedly during playback to view the different subtitle languages available on the disc Note If appears the feature is not available on the disc Programmed Playback with Video CD and Audio CD Programmed Playback with Video CD and Audio CD Note On a Video CD with PBC you must set PBC to Off on the setup menu to use the Program function See page 13 Insert a Video CD or Audio CD and close the tray Press PROGRAM while playback is stopped The Program menu will appear Program SERA C1C 16 616 ClO 6 616 Pergi Note Press PROGRAM or RETURN to exit the Program menu a Enter the disc number using the numerical keys 1 5 and then press SELECT ENTER Enter the track number using the numerical keys 0 9 and then press SELECT ENTER The next area is s
36. o CDs and Audio CD only D Repeat A B D o Repeat Off iim Resume play from this point Action prohibited or not available Notes e Some discs may not provide all of the features includ ed on the on screen display example shown below e If no button is pressed for 10 seconds the on screen display disappears DVD Items Function Press A V to select desired item Selection Method Title Number Displays the current title number and total number of lt P or Numbers ia i available titles and skips to a desired title number SELECT ENTER Chapter Number HE Displays the current chapter number and total number of lt gt or Numbers G available chapters and skips to a desired chapter number SELECT ENTER Time search HG Displays the elapsed playing time and Numbers 0 16 57 searches a point identified by its elapsed time SELECT ENTER Audio language 1 ENG Displays the current audio soundtrack language lt gt and Digital Audio R 00D encoding method and channel number and Output mode 6 CH any changes you make to the setting Subtitle language E OFF Displays the current subtitles language and lt gt any changes you make to the setting Angle 4A Displays the current angle number and total number of lt gt angles and any changes you make to the angle number Sound Displays the current sound mode and lt gt any changes you make to the setting Items Fu
37. ontrol Operation Range Point the remote control at the remote sensor and press the buttons e Distance About 23 ft 7 m from the front of the remote sensor e Angle About 30 in each direction of the front of the remote sensor OPEN CLOSE Opens and closes the disc tray AUDIO Selects an audio language DVD or an audio channel CD SUBTITLE Selects a subtitle language ANGLE Selects a DVD camera angle if available SOUND Selects sound mode during disc playback MENU Accesses menu on a DVD disc SELECT ENTER Acknowledges menu selection RETURN Removes the setup menu Displays the menu of a video CD with PBC SCAN lt lt PP Press for fast reverse search or for ward search PLAY P Starts playback STOP E Stops playback SKIP kaa gt Moves to PREVIOUS or NEXT chapter track 0 9 number buttons Selects numbered items in a menu PROGRAM Accesses or removes program menu Remote control battery installation Detach the battery cover on the rear of the remote control and insert two R03 size AAA batteries with and aligned correctly caution Do not mix old and new batteries Never mix different types of batteries stan dard alkaline etc D Rear Panel TO TV SCART Jack Connect to a TV with SCART jack VIDEO OUTPUT Switch Select either S VIDEO OUT or SCART s RGB signal dependin
38. playback of disc 1 will start Exchanging the disc and starting playback 1 Press OPEN CLOSE during playback or when play back is stopped Play stops if pressed during playback the disc tray opens and the disc that was in the play position comes to the front 2 Exchange the disc 3 Press OPEN CLOSE or PLAY again The tray closes and playback begins with the disc that was in front Operation with DVD Video CD and Audio CD Continued General Features Note Unless stated otherwise all operations described use the remote control Some features may also be available from the Setup menu Moving to another TITLE a When a disc has more than one title you can select to another title as follows e Press DISPLAY when playback is stopped From the title function press the appropriate numbered button 0 9 to select a title number Moving to another CHAPTER TRACK BA E When a title on a disc has more than one chapter or a disc has more than one track you can move to another chapter track as follows e Press SKIP k lt or BPI briefly during playback to select the next chapter track or to return to the begin ning of the current chapter track e Press SKIP Id twice briefly to step back to the pre vious chapter track e To go directly to any chapter during DVD playback press DISPLAY Then press A W to select C chapter or for a Video CD and Audio CD select T for track Then enter the chapter track number using the
39. red when the disc is removed To resume normal playback from programmed playback Press and hold PROGRAM for 3 seconds until PROG indicator disappears in the display window Additional Information Last Condition Memory This player memorizes the last condition for the last disc you have watched Settings remain in memory even if you remove the disc from the player or switch off the player If you load a disc that has its settings memo rized the latest stop position is automatically recalled Notes Settings are stored in memory for use any time This player does not memorize settings of a disc if you switch off the player before commencing playback Screen Saver A screen saver image appears when you leave the DVD Player in stop mode for about five minutes After the Screen Saver has been engaged for about five minutes the DVD Player will automatically turn itself off Video Mode Setting e With certain discs the playback picture may be flick ering or Dot Crawl is shown on straight lines That means Vertical interpolation or De interlace is not perfectly matched with the disc In this case the picture quality may be improved by changing the video mode e To change the video mode press and hold DISPLAY about 3 seconds during disc playback The new video mode number selected is displayed on the TV screen Check whether the video quality has improved If not repeat the above procedure until pic tur
40. scheme We call files that have the mp3 file extension MP3 files e The player can not read an MP3 file that has a file extension other than mp3 e The player can not read a non MP3 encoded file that has a file extension mp3 MP3 Disc compatibility with this player is limit ed as follows 1 Sampling Frequency only at 44 1kHz 2 Bit rate within 32 320kbps 3 CD R physical format should be ISO 9660 4 If you record MP3 files using the software which cannot create a FILE SYSTEM for example Direct CD etc it is impossible to playback MP3 files We recommend that you use Easy CD Creator which creates an ISO9660 file system 5 A single session disc requires MP3 files in the first track If there is no MP3 file in the 1st track it can not playback MP3 files If you wish to playback MP3 files format all the data in the disc or use a new one 6 We do not recommend using CD RW discs Please use finished CD R discs only 7 File names should be named using 8 letters or less and must incorporate mp3 extension e g A MP2 8 Do not use special letters such as _ gt lt JaV etc 9 Total number of files on the disc should be less than 200 10 Use 74 minute CD R discs 650M Do not use 80 minute CD R 700M software This DVD player requires discs recordings to meet certain technical standards in order to achieve optimal playback quality Pre recorded
41. se DOLBY DIGITAL PCM Select DOLBY DIGITAL PCM if you connect the DVD Player s DIGITAL OUT jack to a Dolby Digital decoder or an amplifier or other equip ment with a Dolby Digital decoder Stream PCM Select Stream PCM if you connect the DVD Player s DIGITAL OUT jack to an amplifier or other equipment with a DTS decoder Dolby Digital decoder or MPEG decoder PCM Select when connected to a 2 channel digital stereo amplifier The DVD player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital MPEG1 or MPEG2 recording system Disc Audio gt dara PCM Disc Subtitle Stream PCM Disc Menu PCM Rating Country Code QU TWAspect Menu Language Sample Freq v 48KHz 96KHz Digital Audio Output Others Sample Frequency To change the Sample Frequency setting first select the desired Digital Audio Output as indicated above If your receiver or amplifier is NOT capable of handling 96KHz signals select 48KHz When this choice is made this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them If your receiver or amplifier is capable of handling 96KHz signals select 96KHz When this choice is made this unit will pass all signals through without down conversion or processing Others The DRC Vocal and PBC settings can be changed e Press A to select the desired item and press SELECT ENTER The setting of the selec
42. ted item alternates between On and Off gt DRC On Vocal On PBC On Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect a Menu Language 7 Digital Audio Output Others Dynamic Range Control DRC With the DVD format you can hear a program s sound track in the most accurate and realistic presentation possible thanks to digital audio technology However you may wish to compress the dynamic range of the audio output the difference between the loudest sounds and the quietest ones Then you may listen to a movie at a lower volume without losing clarity of sound Set DRC to On for this effect Vocal Set Vocal to On only when a multi channel karaoke DVD is playing The karaoke channels on the disc will mix into normal stereo sound PBC Set Playback Control PBC to On or Off On Video CDs with PBC are played according to the PBC Off Video CDs with PBC are played the same way as Audio CDs Before Operation Continued Parental Control Rating Movies on DVDs may contain scenes not suitable for children Therefore discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc These scenes are rated from 1 to 8 and alternatively more suitable scenes are available for selection on some discs Ratings are country dependent The Parental Control feature allows you to prevent discs from being played by your children or to have certain
43. till pictures of high resolution can be played if they are included in the disc Video CDs not equipped with PBC Version 1 1 Operated in the same way as audio CDs these discs allow playback of video pictures as well as sound but they are not equipped with PBC HDCD High Definition Compatible Digital HDCD High Definition Compatible Digital is a recording system that has improved audio CD sound in dynamic range sound field reproducibility and vocal acoustics This DVD player is equipped with an HDCD decoder The HDCD indicator illuminates when playing an HDCD encoded audio CD Before Use Continued Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy For maximum protection re pack the unit as it was originally packed at the factory When setting up the unit The picture and sound of a nearby TV VCR or radio may be distorted during playback In this case position the unit away from the TV VCR or radio and turn off the unit after removing the disc To keep the exterior surfaces clean Do not use volatile liquids such as insecticide spray near the unit Do not allow rubber or plastic products to contact the unit for a long period of time They will leave marks on the surface To move the unit When you move the player take out any discs If you don t the discs may be damaged or drop into the inter nal workings of the DVD player Cl
44. u screen e Use the number buttons to select the track you want to view Press RETURN to return to the disc menu screen e Menu setting and the exact operating procedures for using the disc menu may differ depending on the disc Follow the instructions on each menu screen You also may set PBC to Off under setup See page 13 Notes If Parental Control is set and the disc is not within the Rating settings not authorized the 4 digit code must be entered and or the disc must be authorized see Parental Control on page 14 DVDs may have a region code Your player will not play discs that have a region code different from your player The region code for this player is 2 two Exchanging discs during playback e Press OPEN CLOSE on the front panel during play back to open the disc tray e Press NEXT DISC to rotate the disc trays to the desired position The carousel will rotate clockwise by one disc increments e Exchange the discs and press OPEN CLOSE to close the disc tray Note The disc tray presently loaded in the play position can not be exchanged Skipping discs Press NEXT DISC during play or when playback is stopped Notes When NEXT DISC is pressed the disc tray rotates and playback begins from the beginning of the next disc If there is no disc on the next disc tray the following disc tray will be selected When NEXT DISC is pressed during playback of disc 5
45. video cable into the jacks securely securely e The connected TV power is turned off e Turn on the TV No sound e The equipment connected with the e Select the correct input mode of the The playback picture is poor The DVD player does not start playback The remote control does not work properly audio cable is not set to receive DVD signal output e The audio cables are not connected securely e The power of the equipment connected with the audio cable is turned off e The Digital Audio Output is set to the wrong position e The disc is dirty e No disc is inserted e An unplayable disc is inserted e The disc is placed upside down e The disc is not placed within the guide audio receiver so you can listen to the sound from the DVD player e Connect the audio cable into the jacks securely e Turn on the equipment connected with the audio cable e Set the Digital Audio Output to the correct position then turn on the DVD player again by pressing POWER e Clean the disc e Insert a disc Check that the DVD or audio CD indicator in the DVD display is lit e Insert a playable disc Check the disc type color system and Regional code e Place the disc with the playback side down e Place the disc on the disc tray correctly inside the guide e The disc is dirty e The Rating level is set e The remote control is not pointed at the remote sensor of the DVD player e The
46. volume gradually to personal preference To enjoy DTS Digital Surround playback an external 5 1 chan nel DTS Digital Surround decoder system must be connected to the digital output of the player D Disc related terms Title DVD only The main film content or accompanying feature content or additional feature content or music album Each title is assigned a title reference number enabling you to locate it easily Chapter DVD only Sections of a picture or a musical piece that are smaller than titles A title is composed of one or several chapters Each chapter is assigned a chapter number enabling you to locate the chapter you want Chapter numbers may not be recorded on all discs Track Video CD and audio CD only Sections of a picture or a musical piece on a video CD or an audio CD Each track is assigned a track number enabling you to locate the track you want Scene On a video CD with PBC Playback control functions moving pictures and still pictures are divided into sec tions called Scenes Each scene is displayed in the menu screen and assigned a scene number enabling you to locate the scene you want A scene is composed of one or several tracks Types of video CDs There are two types of video CDs Video CDs equipped with PBC Version 2 0 PBC Playback control functions allow you to interact with the system via menus search functions or other typical computer like operations Moreover s
47. y CD R RW discs that do not con tain any data or contain different kinds of formatted data other than MP3 and CD DA data Do not attach any seal or label to either side the labeled side or the recorded side of a disc Do not use irregularly shaped CDs e g heart shaped or octagonal It may result in malfunctions P notes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer some playback features of the unit may not be avail able or other functions may be added Refer also to the instructions supplied with the DVDs and Video CDs Some DVDs made for business pur poses may not be playable on this unit This DVD player is designed and manufactured for playback of region 2 encoded DVD soft ware The region code on the labels of some DVD discs indicates which type of player can play those discs This unit can play only DVD discs labeled 2 or ALL If you try to play any other discs the message Check Regional Code will appear on the TV screen Some DVD discs may not have a region code label even though their playback is prohibited by area limits Regional code of the DVD player and DVDs BM note on DTS encoded CDs To avoid possible damage to the audio system turn down the volume before playing back such discs Adjust the
Download Pdf Manuals
Related Search