MicroBoards Technology QD-2 User's Manual
Contents
1. The disc sessions have already been closed Tgt overflow del last trk The disc capacity is not enough to store the selected tracks Ins empty disc Continue Do you want to insert a blank disc and continue copying Firmware Update Invalid firmware Disc 444 nennen The disc doesn t contain a valid firmware Updating FW science anes Dead adh sient he The system is updating the firmware Update F W xxx to yyy Do you want to update the firmware version from xxx to yyy Searching FW oae e e engen The system is searching for a valid firmware Check Sum Erroreen aee ia The updated firmware has errors Last update F W OK ennnsnnnnennnnnnennn The firmware is updated successfully Last update F W Fail u 00224444n nennen The firmware is not updated successfully Flash ROM Tail iio ali Data cannot be written into Flash ROM2. 8 Edit Track for CD only 8 1 CD to CD Edit 8 3 Play Audio Track 8 4 Close Session 9 Setup 9 1 Language Default is English 9 2 CD Burn Speed Default is Maximum 9 3 CD Read Speed Default is Maximum 9 4 Auto Start Drive Default is Off 9 5 Startup Menu Default is Copy 9 6 Auto Verify Default is Off 9 7 Auto Compare Default is Off 9 8 Auto Prescan Default is Off 9 9 Eject Disc Default is Eject Good Only 9 10 Burn Mode Default is DAO 9 11 Display Time Default is Off 9 12 Button Sound Default is On 9 13 Device Info 9 14 System Info 9 15 Quick Erase 9 16 Full Erase 10 Adv Setup 10 1 UnderRun Protect Default is On 10 2 Overburn Default is Off 10 3 Read Error Skip Default is Off 10 4 Burn in 10 5 Update Firmware 10 6 Compare Firmware 10 7 H W Diagnostic 10 8 Load Default 10 9 CD G Default is Off 10 10 ISRC 8 MCN Default is Off 10 11 Switch USB Mode NOT USED 20 Appendix 2 LCD Messages Normal Conditions Initialize SDRAM seeennenennenennnnnnnnnn nn Initialize the memory of the system Detect Drives 24444 nennen Detect what drives are connected with the system User Abort en ai Cancel the job during operation Analyzing etic u an ine ae lade oa Analyze the source disc Source Drive Not Ready 4sn nennen Source drive is not ready to read Target Drive Not Ready 4 4eenn
3. CD to CD Edit Press the ENT button The following screen appears Press the Y button until the display reads 8 03 Edit Track Make sure your recorded audio CD is in the BOTTOM recorder drive Close Session Press the ENT button The following screen appears Close all disc s Sessions Yes Closing Session Please wait Press the ENT button The following screen appears Close Complete Once the disc is closed the following screen appears OK 01 Fail 01 13 Setup T 9 Setup gt 9 01 Setup ENT Language A Idioma i 71 Language English y Spanish y v NOTE 12X is currently the minimum ESC 7 ENT A Burn Speed n oe Seu gt Bam enced Available speeds 52x 48x 40x burn speed If a slower speed is pi y 32x 24x 16x 12x 10x 8x 4x selected burn will be at 12X v y Read Speed 9 03 Setup ENT Read Speed A DR gt Read S d Maxi gt Available speeds 52x patent ee y 48x 40x 32x 16x 8x v Y ESC 9 04 Setup ENT Auto Start Drive A Options are Off Note Option 2 is not used Auto Start Drive OFF
4. Adv Setup ENT gt Runs through H W Diagnostics controller diagnostics v Y ESC 10 08 Adv Setup ENT gt Load Default Load Default Load Default Config YES vEs OK NO yoi A ESC 10 09 Adv Setup ENT CD G Options are ON o CD G OFF Off v M Y A ESC 10 10 Adv Setup ENT p ISRC amp MCN Options are ON o ISRC 8 MCN ON Off v M Y ESC 10 11 Adv Setup ENT NA o Switch USB Moda Not Used 17 Advanced Setup Menu To get to the Advanced Setup Menu press and hold the ESC button for three seconds The Advanced Setup menu includes options for the more advanced user Normally these functions are not used in the daily operation of the QD 52 duplicator If you have any questions about using these functions please contact the Microboards technical support department UnderRun Protect The UnderRun Protect feature allows the recorder to use Burn Proof during recording This setting defaults to ON and should remain on Overburn The default setting for this feature is OFF Overburn can be used with certain CD recorders to allow more data to be writing to the disc This feature is not supported by the QD 52 duplicator Read Error Skip The Read Error Skip feature is used if you wish to ignore read errors during duplication The default setting is OFF and it is highly recommended that this setting is not changed If it is turned ON there is the possibility of copying a disc that is not the same as the mast
5. Close all Disc s Closing Session Close Complete Close Session gt Sessions YES gt Please wait gt Ok 1 Faik O A NO Y See the 9 Setup Setup Menu page 15 Press and Hold the ESC button for 3 seconds Y 10 Adv Setup See the Adv Lp Setup Menu page 18 Functions There are 9 different functions for the QD 52 duplicator Copy Test Test amp Copy Verify Compare Prescan Disc Info Edit Track and Setup For the Setup options please refer to page 15 Copy NOTE For CD G duplication please see pages 18 20 The Copy function is used to copy our master disc to the blank media CD R or CD RW The QD 52 duplicator will be in Copy mode when it is turned on The display will read Copy Place your master disc into the TOP CD reader drive Place your blank media into the BOTTOM CD writer drive Press the ENT button on the controller interface Copying 52x 18 150 4MB 01 15 The data will now be copied to the blank disc When the job is completed the recorded disc will be ejected from the BOTTOM drive The display will read Test The Test function is used to simulate copying our master disc to the blank media CD R or CD RW To use the Test function press the W button on the controller 2 Test until Test is displayed In Test mode the blank media will remain blank and can be used again Place your master disc into the TOP CD reader drive Place your blank media into th
6. alternate the setting between ON and OFF Press ENT when ON is displayed to enable CD G duplication Press ESC to exit the Advanced Setup Menu Use the UP or DOWN arrow to return to Copy mode ISRC amp MCN The ISRC International Standard Recording Code amp MCN Media Catalog Number feature allows you to copy this information from a CD audio master to the blank disc NANA NOORWN gt The default setting if OFF 18 Specifications Product Name Quic Disc QD 52 Product Interface ATAPI IDE Read Speed 52X Write Speed 52X Supported Formats CD ROM Mode 1 amp 2 CD DA CD ROM XA Video CD Game CD Mix Mode Multisession HFS CD Bridge Photo CD CD Extra CD G Karaoke System Display LED Write Method Auto Detect DAO TAO Operation Mode COPY TEST SCAN SAFE Data Buffer 1 MB Firmware Upgrade Via CD ROM Dimension 6 8 x 7 5 x 11 25 H x W x D Inches Weight 4 8 kg 10 7 Ibs Power Supply 100 240V 2A MAX 50 60Hz Certification CE FCC Taiyo Yuden is the recommended media for this product CAUTION Disconnect AC Power Cord Before Servicing High Voltages Present with Unit Powered Off and Line Cord Connected Technical Support For technical questions or support issues contact Microboards Technology technical support United States Europe Japan PH 952 556 1639 PH 44 0 845 230 7800 PH 03 356 11 2266 FAX 952 556 1628 www microboards co uk www microboards co jp support microboards com www micr
7. customize the use of the QD 52 duplicator Here is a description of the options in the setup menu Please refer to the chart on page 15 for the location and options of these settings Language The QD 52 duplicator has two language options English and Spanish English is the default setting CD Burn Speed The default record speed for the QD 52 is Maximum 52x The other record speed options are 48x 40x 32x 24x 16x 12x 10x 8x and 4x NOTE 12x is currently the minimum burn speed Selecting lower speeds will not reduce the burn speed below 12x Read Speed The default read speed for the QD 52 is Maximum 52x The other read speed options are 48x 40x 32x 16x and 8x Auto Start Drive The Auto Start Drive is used to automatically start recording once the master disc and blank disc are inserted into the drives There are 3 options for this setting Off 1 and 2 To use this feature change the value from OFF to 1 The 2 setting is not used Once the value is set to 1 the system will automatically start recording once a master and blank disc are detected Startup Menu The Startup Menu selection allows you to select the main menu item that appears when the QD 52 duplicator starts up The default setting is 1 Copy Any of the 10 menu items can be selected Auto Verify The Auto Verify function can be turned On if you wish to verify every copy you make with the QD 52 duplicator The verify function checks the copied dis
8. lis aad tee mido 16 Ad Seller ii at iii la el Batty 17 UnderRun Protect timida tal 18 Overburmn 22m Seated O A tte is ee cathy 18 ReadlEnror Skips sss Revs tore cst ie lan einer A lea dai 18 BUT IO add een inserieren 18 Update Firmwares vir a it tt db 18 Compare FInMWaAre ress anti ic tii de aa e id 18 H VV Di gnostie n 4 r2 2er en ls lt lla hes Geet 18 Load Default tas tt A tec 18 CDS aten eoa ii did it Arc 18 ISRESOMIEN canto a a a a e iaa 18 O E cud na e acre eran ea asa tases dante ty 19 Technical SUPPORT nenne enter 19 Appendix 1 List of Functions 44424444400n0nnnnnnnnnnnnnnnnennnnnnnnnnnnnnnannnnnnnnnnnnnnnnnnnnennnnennnnen 20 Appendix 2 LCD Messages 44444444444444244n0annnnnnnnnnnnnnnnennnnnnnnnnnnnnnennnnnnnennnnnnnnnnnnnnnnnnnnnnen 21 PUMO ENUIG 3 22 22 a N Hin Cara A T 21 Firmware Updater a aa aaa a here nee aa Ea E E sad 21 Introduction The QD 52 is a high speed low cost one to one CD Recordable duplication system from Microboards Technology LLC The QD 52 is perfect for any user requiring easy copying of audio video or Data CDs Superior technology allows the QD 52 to ship without a hard drive LED indicators provide the user with status of the duplication process minimizing the number of faulty discs Current high speed CD Recordable technology is supported at 52X which is the highest in the industry Applications suited for the QD 2 include Pro Audio Multimedia Gove
9. pressed the following screen appears u Close all disc s Sessions Yes 11 Press the ENT button The following screen appears Closing Session Please wait Once the disc is closed the following screen appears Close Complete OK 01 Fail 01 Play Audio Track The Play Audio Track function is used to play an Audio CD that is placed into the TOP reader drive You will need to plug in head phones into the drive in order to hear the audio NOTE This menu item requires that the drives have headphone jacks on the front drive panel If no headphone jacks are present this menu item will not function To use the Play Audio Track function press the Y A buttons until the 8 Edit Track display reads Press the ENT button The following screen appears 8 01 Edit Track CD to CD Edit 12 Press the Y button until the display reads 8 02 Edit Track Play Audio Track Press the ENT button The following screen appears Select Track 1 16 04 53 To play a track press the ENT button To scroll to the different tracks press the Y A buttons To get back to the main menu press the ESC button Close Session The Close Session function is used only if you did not close an audio CD as described in the Edit Track CD to CD Edit section You can use this function to manually close the disc To use the Close Session function press the WA buttons until the 8 Edit Track display reads 8 01 Edit Track
10. y 1 and 2 in the QD 52 duplicator v Y ENT A Options are Copy Test Test amp Copy Be ene gt a oa gt Verify Compare Prescan Disc Info P Gopy y Edit Track Setup Adv Setup v Y 9 06 Setup ENT Auto Verify A Options are ON w m e Auto Verify OFF y or OFF y v ESC 9 07 Setup ENT Auto Compare A Options are ON En al _ Auto Compare OFF y or OFF y v 9 08 Setup ENT Auto Prescan A Options are ON q e Auto Prescan OFF y or OFF v Y 9 09 Setup ENT Eject Disc Eject Disc Eject Disc Eject Disc Eject Good Only y Eject All Discs v Do Not Eject v Y ESC 9 10 Setup ENT 9 10 Setup 9 10 Setup 9 10 Setup gt gt mM Burn Mode DAO v TAO Not Close v TAO v Y 9 11 Setup ENT Display Time A Options are ON Display Time Off y or Off y v 9 12 Setup ENT Button Sound A Options are ON gt _ gt ESC Button Sound ON v or Off v Y 9 13 Setup ENT 00 IDE1 Master ENT CD W552G 8 gt gt gt Device Info CD RW Teac Q454 v v 01 IDE2 Master ENT CD W552G CD RW Teac Q454 Y 14 Setup uplicator Z 9 14 S ENT CD Dupli ENT SST 39SF040 En m System Info 1 1 ver T 970 2004 08 04 ACARD y v ESC 9 15 Setup ENT All data will be YES Does a quick 4 gt A Quick Erase Lost Erase YES erase of the disc NO y v 9 16 Setup ENT All data will be YES Does a full erase Tr 1 kl Full Erase Lost Erase YES of the disc A NO 14 The Setup menu includes many setting the user can select to
11. 7 2 0 Test Blank Disc 2 0 Test Analyzing gt 150 4MB 01 15 gt OK 01 Esc T Load Next oad Next ENT ENT Source Disc Copying 52x 17 3 0 Copy Blank Disc 3 0 Test8 Copy gt Analyzing gt 150 4MB 01 15 gt OK 01 f ESC Y Solar ENT pd Copied disc is now 4 0 Verify Y gt PATIO gt being read OK 01 v t ESC Y ENT Copied disc is now compar OKA 5 0 Compare gt Preparing gt being compared with gt nn a Fail 0 Diff 0 the master disc v t Esc Y Far Source Disc Scaning 24x 15 6 0Prescan Amann A ans ois gt PreScan OK v t ESC ES v v v v Source Disc Total 01 Sessions Total 04 15 Session 01 Track 01 7 0 Disc Info gt Analyzing gt Total 01 Tracks gt Total 37 0 MB gt Track 01 01 gt CDXA 37 1 MB Y ENT 8 01 Track Extraction Select Track 8 0 Edit Track cptocpedt el mo osa ff 4 Fee 4 ENT Select that track number ENT or y Y Skip that track number Select Track 10 10 05 14 Y Select Track End 3Trk 13 36 ENT Y y NO YES ESC YES End Edit disc Copying 52x Edit Burn Complete Continue edit And bum YES gt 310 gt 23 gs OK 01 gt Next Disc NO a _2Insert Next Master NO Y Close all disc s y Session YES ENT Y Closing Sesion Please wait Y Eee Close Complete OK 1 Fail 0 Y ESC ENT ENT 8 02 Track Extraction Select Track Playing Track 1 Play Audio Track 1 16 02 45 I 00 15 1 02 45 x ESC Y ESC ENT YES 8 03 Edit Track
12. MICROBOARDS Technology QD 52 User s Manual www microboards com Version 4 4 Table of Contents Introduction 5 ee Een 5 Unpacking your systern aeea 0a di 5 Installation La one as 2 er Rt re Sek tre A ale Te or oh eae cn nee Ske 5 BASIC IMStruCtiOns EEE a 6 B ttons and LEE amp D 4 4 44 42 ee coxhvae sees sas daesdnsa dace sing T A E EN 6 Hardware Deseription 2 2 23 naar nn ernennen age 6 Main MOM re e re T ee a 8 FUNGUONS See se ed hates nn cach pee EEE Sha di is 9 COPA ti ET 9 Ls a Ten dro 9 TESEO ai e E iaa 9 VOM AA A a aa eet 10 Compare A arena hae ee ee etd 10 Prescan zu Brakel Mir ee net ee 10 Dise Oria ran ie es eb ii 11 Edit Track a es lee Re Hi 11 EDtOED Edit aia ie ee eee HH ee 11 Play Audio Track iii ur re la ne elek hi 12 Close SESSION soiien aan a edie ey 13 SOUP aa re ner user anbraten ker fliese 14 Language Arne te ee EHE la 15 CD Burn Speed 2er ad Renee 15 Read Speed ica Mala Inh 15 AUTO Start Driver a en eat adda ea tease te 15 Startup Menard cetera A A E 15 Auto Venly cetera deri tdo eaten ids nian adenoids 15 Auto Compa eee A dados 15 AUTO Pres CM id ds 15 Eject DISC dada 16 BUT Ode tate te etal etnias nn dls cate aati dee aE nda Tals 16 Display Time Ana get ade a ae a e E a E A aaa eae an als 16 Button SOU ee yaad ier ela alt ald 16 DevicelHf 2 2 o angehenden 16 SM IM ad 16 Quick Er S Btn aa a a a de o ree oo a 16 FEulliEraser ar ts Bis ds a ie
13. c to see if it can be read It does not compare the copy with the master disc The default setting is Off Auto Compare The Auto Compare function can be turned On if you wish to Compare every copy with the master disc The Compare function only works with Data master discs If there is audio or video on the master disc the Compare function will not work The default setting is Off Auto Prescan The Auto Prescan function can be turned On if you with to Prescan every master disc before recording The default setting is Off 15 Eject Disc There are 3 options for the Eject Disc setting 1 Eject good discs only 2 Eject all discs 3 Do not eject discs The default setting is to eject the good discs only Burn Mode There are 3 options for the Burn Mode setting 1 DAO Disc At Once 2 TAO Not Close Track At Once not closed 3 TAO Track At Once closed The default setting is DAO It is recommended that this setting be used Display Time The display time function is used to display the total record time after the recording is completed The default setting is Off Button Sound The Button Sound function is used to turn on or off the beep sound a button makes when pressed The default setting is On Device Info The Device Info function displays a variety of information about the CD reader and writer including model number and firmware revision Please review the Setup Menu on page 15 for more d
14. e BOTTOM CD recorder drive Press the ENT button on the controller interface The copied disc will now be read Once completed the display will 4 Verify show OK 01 Compare The Compare function is used to compare the master disc with the copied disc The Compare function will only work with Data masters If your master disc has audio or video VCD on it the Compare function will not work To use the Compare function press the WA buttons until the display reads 5 Compare Place your master disc into the TOP CD reader drive Place your copied disc into the BOTTOM CD writer drive Press the ENT button on the controller interface The duplicator will now compare the two discs When completed Compare OK 1 the display will read Fail 0 Diff 0 Press the Y button and the following screen will appear Src 01 CD RW Total 15 2MB Press the Y button again and the following screen will appear Tgt 00 CD RW Identical Prescan The Prescan function is used to verify the master disc can be read correctly To use the Compare function press the WA buttons until the display reads 10 Place the master disc into the TOP reader drive and press ENT The prescan starts and the following screen appears Scaning 24x 15 620 4MB 02 15 Once the scanning is complete the following screen will appear PreScan OK Disc Info The Disc Info function displays information on the type of master disc placed in the TOP reader dr
15. e BOTTOM CD writer drive Press the ENT button on the controller interface Testing 52x 18 The duplicator will now simulate writing to the blank disc 150 4MB 01 15 When the job is completed the recordable disc will be ejected from the BOTTOM drive The display will read 2 0 Test OK 01 Test 8 Copy The Test and Copy function will perform both operations one after the other If the Test portion passes without errors the system will automatically start the Copy process To run the Test and Copy function press the WA buttons until the 3 Test amp Copy display reads f Place your master disc into the TOP CD reader drive Place your blank media into the BOTTOM CD writer drive Press the ENT button on the controller interface Testing 52x 18 The duplicator will now simulate writing to the blank disc 150 4MB 01 15 When this operation completes the unit will start the Copy Copying 52x 18 process 150 4MB 01 15 When the job is completed the recorded disc will be ejected from the BOTTOM drive The display will read Verify The Verify function will check to see if the recorded disc can be read This is different from the Compare function The Verify function will not compare itself with the master disc It is only checking to see if the disc that was recorded can be read back To run the Verify function press the Y A buttons until the display reads 4 Verify Place the copied disc into th
16. er Burn in The Burn in function is used to test the operation of the QD 52 duplicator and is for service purposes only This function should only be used if directly by Microboards Technical Support Update Firmware The Update Firmware feature is used to update the controller firmware To update the firmware Place the firmware CD into the TOP reader drive Press the ENT button The display will show Update F W T 950 Press the ENT button to complete the firmware update ToT 970 YES The duplicator will reboot automatically after installing i the new firmware Compare Firmware The Compare Firmware function is used to compare the firmware installed on the controller with the firmware on the CD H W Diagnostic Hardware Diagnostics runs a number of tests on the controller Normally this function is used by service personnel Load Default The Load Default feature will set all the values back to the factory default settings CD G The CD G feature when set to ON in the Advanced Setup Menu will allow you to copy a CD G Karaoke master disc The default setting is OFF Important Note Tne CD G value must be OFF in order to use the Track Extraction feature To enable CD G duplication perform the following steps Press and HOLD the ESC button for 3 seconds to enter the Advanced Setup Menu Press the UP or DOWN arrows until the display reads 10 9 Adv Setup CD G Press ENT to adjust the CD G setting Use the UP or DOWN arrows to
17. etails System Info The System Info function displays a variety of information about the controller module including model number and firmware revision Please review the Setup Menu on page 15 for more details Quick Erase The Quick Erase function is used to Erase CD RW media This option performs the Quick erase of the disc Full Erase The Full Erase function is used to Erase CD RW media This option performs the Full erase of the disc 16 Adv Setup ENT 10 01 Adv Setup ENT Under Run Protect A Options are ON o 10 Advanced Setup Under Run Protect gt ON gt Off y A M A ESC 10 02 Adv Setup ENT gt Overburn a Options are ON o Overburn Off Off M v Y A ESC 10 03 Adv Setup ENT p Read Error Skip Options are ON o Read Error Skip OFF Off v M Y ESC 10 04 Adv Setup ENT Burn Burnin Used by Service Burr In gt Erase amp Copy Test Personnel Only v v Y ESC 10 05 Adv Setup ENT gt Update FW T 950 gt Firmware is Update Firmware To T 970 YES YES updated 4 NO v Y ESC 10 06 Adv Setup ENT Last update FW Compare Firmware OK M Y ESC 10 07
18. ive To use the Disc Info function press the WA buttons until the display 7 Disc Info reads Place the master disc into the TOP reader drive Press the ENT button gt The source is analyzed Source Disc The following screen appears Analyzing The following 4 screens display a variety of information about the master disc The screens are reached by pressing the W A buttons Session 01 Track 01 Total 01 Sessions Total 01 Tracks Total 04 15 Total 37 0MB Track 01 01 CDXA 37 0MB Edit Track The Edit Track function allows you to select multiple tracks from different master discs and place them on one Audio CD The maximum number of tracks that can be written to the CD is 99 In the Edit Track function there are three options CD to CD Edit Play Audio Track and Close Session Important Note The CD G value must be set to OFF in order to use the Track Extraction feature Please see the Adv Setup menu on page 18 for more details CD to CD Edit To use the CD to CD function press the WA buttons until the display 8 Edit Track reads 1 Press the ENT button The following screen appears 8 01 Edit Track CD to CD Edit 2 Place the first master audio CD into the TOP reader drive Place the blank CD into the BOTTOM writer drive Press the ENT button Select Track The following screen appears 1 16 04 53 3 To select a track that you want to burn to the blank disc press the ENT button This will
19. nnnennennnnnennnennnn Target drive is not ready to write Source Disc Not Ready 400 nennen Source disc is not ready to be read Target Disc Not Ready 444 nennen Target disc is not ready to be written into Erasing distenna a a E a ene The system is erasing the data on the disc Fail to get Drive INfO ooooooonococcconnnnncconononacicininananon The drive information cannot be obtained Fail to get Src Disc Info The information of source disc cannot be obtained Save new config Fail The new setting of configuration cannot be saved Load Default Config een Do you want to load the default settings Prepa Mo 22 22 He teen ta ee ed eine The system is preparing to record Check Target Please Wait rn The system is checking the target device Audio Disc Can t compare The system cannot compare the audio discs Identieal 2 es nennen sn The comparison results are the same Read disc error 2 un During comparison the disc cannot be read Cannot read TOC eerren The system cannot read the contents of disc TOC not match ad The comparison results are not the same Target overflow The target disc hasn t enough capacity to store new data Target Disc Not Empty uunsesensnnnennnen
20. nnnnnnnnn nennen nenn The target disc still has data Press a Key to Eject Good Disc Press any key to eject the good disc after copying Press a Key to Eject Fail Disc Press any key to eject the failed disc after copying CD RW does not Support the Func CD RW doesn t support this function Hold ESC to exit eiiiai as aaie Press ESC for a second to terminate the test All data will be lost erase All data on the disc will be lost Confirm the erasing of data Erase Einished 2 ciones te The erasing of data comes to an end No Erasable Disc in CD RW The disc on the CD RW device is not rewritable Audio Editing Lost selected Tracks eenn Abort the selected tracks and delete them End edit disc and burn Finish the music disc editing and start to copy Continue edit next Disc Ask if you want to continue the music disc editing Target Overflow Re Select The disc capacity is not enough to store the selected tracks Close all disc s session nennen Confirm the closing of disc sessions NO AUDIO track in this disc een The source disc has no audio track Insert next diSter iD Insert the next audio disc Sessions were closed already
21. oboards com Please have the Model and Serial Number of your QD 52 available when contacting Technical Support Any unauthorized modification to this equipment may result in the revocation by the FCC of the user s C authority to operate this equipment NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 ofthe FCC Rules These limits are designed to provide reasonable protection against harmful interference in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense standards EN 55022 EN 55024 The CE mark has been affixed in accordance with the CE Marking Directive This product is in conformity with the EMC Directive 89 336 EEC through compliance with the following European 93 68 EEC Canadian Department of Communications DOC Statement This Class A digital apparatus complies with the Canadian ICES 003 Issue 4 2004 Cet appareil numerique de la classe A est conforme a la norme NMB 003 du Canade 19 Appendix 1 List of Functions 1 Copy 2 Test 3 Test amp Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info
22. ption Controller Interface Reader Drive Recorder Drive Power Switch Power LED The QD 52 system consists of a CD reader CD Writer and Controller module The master discs always go into the TOP CD Reader drive The blank CD media will always go into the BOTTOM CD Recorder drive The power switch and power LED are also located on the front of the QD 52 duplicator The LCD display will show the different menu selections and also information pertaining to the recording process Here is a typical example of what is displayed during the COPY process Displays the function being performed such as Copying or Testing and shows the record speed Shows the percentage completed for this action Copying 52x Displays the amount of data left to be Shows the time remaining to recorded This number starts at the capacity complete this action This of the master and counts down number also counts down Main Menu ENT Source Disc Copying 52x 17 1 0 Copy Load Next 1 0 Copy PA Analyzing 150 4MB 01 15 OK 01 Blank Disc ENT Esc Y Load Next oad Next ENT ENT Source Disc Testing 52x 1
23. put a symbol in front of that track Select Track 1 16 04 53 4 Press the Y A buttons to scroll through the tracks on that CD selecting the tracks you wish to record 5 Once all of your tracks are selected for that master press the Y Select Track button until the display reads End 1Track 04 53 11 This screen shows the total number of tracks selected from the master disc and the total time of those tracks 6 Press the ENT button The following screen appears End Edit Disc And burn YES Note Pressing the Y button and selecting NO takes you back to Editing tracks 7 Press the ENT button to begin recording the selected tracks to the blank disc The following screen appears Copying 52x Edit 1116 1 1 8 Once the tracks are copied to the blank disc the following screen appears Burn Complete OK 01 9 Press the ESC button to take you to this screen Continue Edit If you wish to continue to all more audio tracks to the disc in the Next disc NO recorder drive press the W button to change the NO to YES Then press Enter The TOP reader drive will open and ask you to put in the next master disc Place the new disc into the drive and close the tray Go to step 3 and repeat the process Once you have completed copying the audio tracks to the BOTTOM disc you will need to close the disc 10 At this screen leave the selection as NO and press ENT Continue Edit Next disc NO Once ENT is
24. rnment Education Software Development Medical Imaging and Data Interchange Unpacking your system When unpacking your duplicator confirm the following items are included QD 52x 1 to 1 duplicator Power cable Manual CD R disc If any of these items are missing please contact Microboards Technology Technical IMPORTANT Please keep all the packing for your QD 52 duplicator If your unit ever needs to be sent in for service it must be returned in the original packing or the warranty will be voided Installation e Connect the power cable to the QD 52 duplicator and plug in to a protected power outlet strip or UPS power supply Note for Installation 1 The socket outlet shall be installed near the equipment and be easily accessible 2 Do not block cooling fans e Turn on power to the duplicator e The system will go through initialization and then display 1 Copy e The system is now ready to use Basic Instructions Buttons and LCD There are four buttons and an LCD on the front panel of the QD 52 duplicator LED display Shows the menu items and any status messages that may come up during operation ENT button The ENT button used to start a duplication process or enter into an area in the menu structure ESC button The ESC button used to stop an operation or move up the menu structure A button used to scroll up in the different menus Y button used to scroll down in the different menus Hardware Descri
Download Pdf Manuals
Related Search