MicroBoards Technology QD-DVD User's Manual
Contents
1. ENT gt Source Disc Copying 52x 17 1 0 Copy Load Next 1 0 Copy Analyzing gt 1504 8 0 15 OK 01 Blank Disc ENT 4 Y Load Next ENT Source Disc Testing 52x 1796 gt 2 0 Test Blank Disc ENT ES Analyzing 1504MB 01 15 OK 01 t ESC Y Load Next ENT ENT Source Disc Copying 52x 17 3 0 Copy Blank Disc 3 0 Test amp Copy gt Analyzing gt 1504MB 01 15 gt OK 01 t ESC ENT 1 iel disc is now 4 0 Verify 4 0 Verify gt Preparing e being read gt OK 01 v t ESC ENT Copied disc is now 5 0 Compare gt Preparing being compared with gt a aem the master disc i v ESC ENT Source Disc Scaning 24x 15 6 0 Prescan gt Analyzing e 6204MB 01 15 gt PreScan OK v t ESC gt v v v v Source Disc Total01 Sessions 04 15 Session01 Track01 7 0 Disc Info gt Analyzing 5 Total01 Tracks 370 MB gt Track01 01 CDXA37 1 MB 8 0 Edit Track ENT 8 01 Track Extraction Select Track 4 PETS aan CD to CD Edit 440 052. The disc capacity is not enough to store the selected tracks Ins empty disc Continue Do you want to insert a blank disc and continue copying Firmware Update IinvalidfirmwaredDisc The disc doesn t contain a valid firmware PW iiem A NN EM The system is updating the firmware Update F W xxx to Do you want to update the firmware version from xxx to yyy Searching F W mami aleme mak b The system is searching for a valid firmware Check Sum ET R hz ir le cote ior tae kadinla The updated firmware has errors The firmware is updated successfully lastupdateF W Fail The firmware is not updated successfully Flash ROM faill esim a las b Data cannot be written into Flash ROM
3. 8 Once the tracks are copied to the blank disc the following screen appears Burn Complete 9 Press the ESC button to take you to this screen Continue Edit Next disc NO If you wish to continue to add more audio tracks to the disc in the recorder drive press the V button to change the NO to YES Then press Enter The TOP reader drive will open and ask you to put in the next master disc Place the new disc into the drive and close the tray Go to step 3 and repeat the process Once you have completed copying the audio tracks to the BOTTOM disc you will need to close the disc Continue Edit 10 At this screen leave the selection as NO and press ENT Next disc NO Once ENT is pressed the following screen appears Close all disc s Sessions Yes 11 Press the ENT button The following screen appears Closing Session Please wait Once the disc is closed the following screen appears Close Complete OK 01 Fail 00 Play Audio Track The QD DVD cannot use this function as the reader drive does not include a headphone jack 12 Close Session The Close Session function is used only if you did not close an audio CD as described in the Edit Track CD to CD Edit section You can use this function to manually close the disc To use the Close Session function press the V A buttons until the display reads 8 Edit Track Press the ENT button The following screen appears 8 01 Edit Trac
4. Load Default Load Default Load Default Config YES YES OK 2114 No ESC 11 09Adv Setup ENT amp MCN A p Options are ON ISRC amp MCN ON Off v v ESC 11 10 Adv Setup ENT USB L H Mode A p Options are ON or Switch USB Mode v Off Accessing the Advanced Setup Menu The Advanced Setup menu includes options for the more advanced user Normally these functions are not used in the daily operation of the QD DVD duplicator If you have any questions about using these functions please contact the Microboards technical support department To access the Advanced Setup Menu press and hold the ESC button for three seconds UnderRun Protect The UnderRun Protect feature allows the recorder to use Burn Proof during recording This setting defaults to ON and should remain on This feature protects against making coasters or bad discs Again this setting should always remain ON 17 Overburn The default setting for this feature is OFF Overburn can be used with certain CD recorders to allow more data to be writing to the disc This feature is not supported by the QD DVD duplicator Read Error Skip The Read Error Skip feature is used if you wish to ignore read errors during duplication The default setting is OFF and it is highly recommended that this setting is not changed If it is turned ON there is the possibility of copying a disc that is not the same as the master Burn in The Burn in function
5. gt MICROBOARDS Technology QD DVD User s Manual www microboards com Version 4 2 Table of Contents o o aan AE 5 Unpacking VOL SVSIOIN eb aaa lal a ear ala lanlar 5 laEitCicii o ee ene 5 Basie NSUVUCHON e C 5 EA EM 5 Hardware eg A NN m 6 M rimum 7 gie feet 8 CODY e li Mors ni del dior Ales tM M toca cud ceo s l 8 uo cte tia rcu e um uic HE uic e PRO e 8 et OD V HEP 9 N N eee ae er ln Rc EI Eu Lu E Elli Lu utbs 9 ba cci de i e bu ud Eu Eus 10 10 DISC MO T M 11 m iz ES 11 11 ER 12 Close SESSION de esd eee leat 13 USB elc 13 SO e 14 Language e 15 ey VK eee 15 DYD BUM e e e 15 Read e RT 15 AUO Start DIVO e 15 SAUD e R A RN 15 Noa p Ame TP EUM ye 15 AUTO OND Ale utei E etta a e eui tent 15 PAULO ROSCA MN euius aos Kp e RK edad 15 DISC yi RR 15 iN igo oro O ERROREM DEPO ERRAT MCN 16 DIDI Dn e pcr ACD MON 16 BURON OU ee lem b erim MU AM CELL Ap de SE 16 CVG STO KARE ML MU RUM HET E NL NECS 16 SS millo issue EA MI Pu ELENA DU M EM E anna in amli 16 QUICK
6. is used to test the operation of the QD DVD duplicator and is for service purposes only This function should only be used if directly by Microboards Technical Support Update Firmware The Update Firmware feature is used to update the controller firmware 1 To update the firmware Place the firmware CD into the TOP reader drive Press the ENT button 3 The display will show Update FW To A XYZ YES 4 Press the ENT button to complete the firmware update 5 The duplicator will reboot automatically after installing the new firmware Compare Firmware The Compare Firmware function is used to compare the firmware installed on the controller with the firmware on the CD H W Diagnostic Hardware Diagnostics runs a number of tests on the controller Normally this function is used by service personnel Load Default The Load Default feature will set all the values back to the factory default settings ISRC amp MCN The ISRC International Standard Recording Code amp MCN Media Catalog Number feature allows you to copy this information from a CD audio master to the blank disc The default setting if OFF Switch USB Mode The Switch USB Mode allows you to enable or disable the ability to use the QD DVD recorder drive as an external burner for your PC Selecting ON will allow access to the USB Mode menu which will appear as menu item 10 Selecting OFF will hide the option in the main menu The QD DVD cannot u
7. number of tracks that can be written to the CD is 99 In the Edit Track function there are three options CD to CD Edit Play Audio Track and Close Session The Edit Track functions are not applicable to DVD media CD to CD Edit To use the CD to CD function press the V A buttons until the display reads 8 Edit Track 1 Press the ENT button The following screen appears 8 01 Edit Track CD to CD Edit 2 Placethefirst master audio CD into the TOP reader drive Place the blank CD into the BOTTOM writer drive Press the ENT button and the following screen appears Select Track 1 16 04 53 3 Toselectatrack that you want to burn to the blank disc press the ENT button This will put a symbol in front of that track Select Track 1 16 04 53 4 Press the VA buttons to scroll through the tracks on that CD selecting the tracks you wish to record 11 5 Onceallof your tracks are selected for that master press the V button until the display reads Select Track End 1Track 04 53 This screen shows the total number of tracks selected from the master disc and the total time of those tracks 6 Press the ENT button The following screen appears End Edit Disc Note Pressing the button and selecting NO takes you back to And burn YES Editing tracks 7 Press the ENT button to begin recording the selected tracks to the blank disc The following screen appears Copying 52x Edit 1 16 1 1
8. 14 EN EM ESC 4 ENT Select that track number ENT or v W Skip that track number Select Track 110 10 0514 Y Select Track End 3Trk 13 36 ENT y NO P YES ESC YES v End Edit disc Copying 52x Edit Burn Completb Continue edit And burr YES gt 302 23 OK 01 gt Next Dis NO gt Insert Next Master NO i Close all disc s v Sessior YES ENT Closing Sesion Please wait ESC __ 8 02 Track Extraction ENT Select Track ENT Playing Track 1 Close Complete Play Audio Track 1 16 0245 P 0015 02 45 Fait 0 y ESC 8 03 Edit Track ENT gt Close all Disc s Closing Session Close Complete Close Session Session YES Please wait OK1 FaitO t NO Y See the 9 Setup gt Setup Menu page 13 VA YES 10 USB Mode USB L H Mode Back to S A Mode Reboots QD DVD Press and Hold the ESC button for 3 seconds 11 Adv Setup See the Adv Setup Menu page 16 Functions There are 10 different functions for the QD DVD duplicator Copy Test Test amp Copy Verify Compare Prescan Disc Info Edit Track Setup and USB Mode For the Setup options please refer to pages 13 15 Copy The Copy function is used to copy your master disc to the blank media The QD DVD duplicator will be in Copy mode when it is turned on The display will read 1 Copy Place your master disc into the TOP DVD reader drive
9. Bises AE REM PA e UE EM US to det tole atu a 16 moli NNUS T 16 Advanced Setup MGI t 17 nnne nennen nnne nnns nnns 17 UNdErRUN e e RE T GE O e e 17 COVOFDUDI PANE trt e K GM dele MEME a AN 18 e ge SE deor MA 18 ES AIM e e tT n 18 Update FIIMWA O S PER TEE iadeli ill ekl M na beze il a banada dalak 18 olm pare F RM salarak nl alda aa a e ite 18 RAV B o pe ke e m 18 koad er Ve PM 18 ORG SOMON CER 18 SWItGD USB MOGE actes ti KR RK A E A My ee 18 Bo e ze EM MM eee 19 Technical SUD DOI Eimer E 19 Appendix I LISCOFFUNCHONS vee aram ses ilmen aaa Aa ee aa a 20 Appendix 2 LCD MESSA eS RE 21 ee le m IN e MM e e e Ye Me eee ere 21 z e ele e ya e e ee e ac qutd 21 Introduction The QD DVD is a high speed low cost one to one DVD Recordable duplication system from Microboards Technology LLC The QD DVD is perfect for any user requiring easy copying of audio video or Data discs Superior technology allows the QD DVD to ship without a hard drive LED indicators provide the user with status of the duplication process minimizing the number of faulty discs Applications suited for the QD DVD include Pro Audio Multimedia Government Education Software Development Medical Imaging and Data Interchange Unpacking your system When un
10. Fail Disc Press any key to eject the failed disc after copying CD RW does not Support the Func CD RW doesn t support this function Hold ESG 10 irt ad Press ESC for a second to terminate the test All data will be lost All data on the disc will be lost Confirm the erasing of data Erase PUPS MO sco cde reed et ese ced The erasing of data comes to an end No Erasable Disc in CD RW The disc on the CD RW device is not rewritable Audio Editing lostselectedlracks Abort the selected tracks and delete them Endeditdiscandbumn Finish the music disc editing and start to copy ContinueeditnextDisc Ask if you want to continue the music disc editing Target Overflow Re Select The disc capacity is not enough to store the selected tracks 5 Confirm the closing of disc sessions NOAUDlOtrackinthisdisc The source disc has no audio track nsert Next CUS Gain ari ei da lead al le m GM alli lin Insert the next audio disc Sessions were closed The disc sessions have already been closed overflow del last trk
11. Place your blank media into the BOTTOM DVD writer drive Press the ENT button on the controller interface The data will now be copied to the blank disc Copying 52x 18 150 4MB 01 15 When the job is completed the recorded disc will be ejected from the BOTTOM drive The display will read NOTE CD masters must be copied to CD media and DVD masters must be copied to DVD media Test The Test function is used to simulate copying your master disc to the blank media To use the Test function press the button on the controller until Test is displayed In Test mode the blank media will remain blank and can be used again Place your master disc into the TOP DVD reader drive Place your blank media into the BOTTOM DVD writer drive Press the ENT button on the controller interface The duplicator will now simulate writing to the blank disc Testing 52x 1890 150 4 01 15 When the job is completed recordable disc will be ejected from the BOTTOM drive The display will read 2 0 Test 01 Test amp Copy The Test and Copy function will perform both operations one after the other If the Test portion passes without errors the system will automatically start the Copy process run the Test and Copy function press the A buttons until the display reads Place your master disc into the TOP DVD reader drive Place your blank media into the BOTTOM DVD writer drive Press the ENT
12. art Up Menu 1 Copy Verify Compare Prescan Disc Info v Edit Track Setup Adv Setup 9 07 Setup ENT Auto Verify A Options are ON Auto Verify OFF v or OFF ESC 9 08 Setup ENT Auto Compare A Options are ON Auto Compare OFF v or OFF 9 09 Setup ENT Auto Prescan A Options are ON e Auto Prescan OFF v or OFF 9 10 Setup ENT Eject Disc Eject Disc Eject Disc Eject Disc Eject Good Only v Eject All Discs Do Not Eject ESC 9 11 Setup ENT 9 10 Setup 9 10 Setup 9 10 Setup Burn Mode DAO v TAO Not Close TAO 9 12 Setup ENT Display Time A Options are ON p Display Time Off v or Off 9 13 Setup ENT Button Sound A Options are ON gt ESC Button Sound ON v or Off 9 14 Setup ENT 00 IDE 1 Master ENT DVD RW DVD 109 Device Info DVD RW Pioneer 1 57 01 IDE2 Master ENT DVD E616P3 v DVD ROM Asus 1 06 Y 9 15 Setup ENT CD Duplicator ENT SST 39SF040 bei System Info 1 1 ver M 10Z 2005 07 15 ACARD ESC 9 16 Setup ENT All data will be YES Does a guick p gt p j Ouick Erase Lost Erase YES erase of the disc v A No V 9 17 Setup ENT All data will be YES Does a full erase gt b Full Erase Lost Erase YES of the disc t NO W 14 The Setup menu includes many setting the user can select to customize the use of the QD DVD duplicator Please refer to the chart above for the location and options of these settings A description of the options in the setup m
13. button on the controller interface The duplicator will now simulate writing to the blank disc Testing 52x 18 150 4MB 01 15 When this operation completes the unit will start the Copy process Copying 52x 1890 150 4 01 15 When the job is completed disc will be ejected from the BOTTOM drive The display will read Verify The Verify function will check to see if the recorded disc can be read This is different from the Compare function The Verify function will not compare itself with the master disc It is only checking to see if the disc that was recorded can be read back To run the Verify function press the V A buttons until the display reads 4 Verity Place the copied disc into the BOTTOM DVD recorder drive Press the ENT button on the controller interface The copied disc will now be read Once completed the display will show 4 Verify OK 01 Compare The Compare function is used to compare the master disc with the copied disc The Compare function will only work with Data masters If your master disc has audio or video VCD on it the Compare function will not work To use the Compare function press the V A buttons until the display reads Place your master disc into the TOP DVD reader drive Place your copied disc into the BOTTOM DVD writer drive Press the ENT button on the controller interface The duplicator will now compare the two discs When c
14. e Press ENT to make your selection Yes 13 Setup NT 9 Setup L 9 01 Setup ENT Language A Idioma j Language English v Spanish ESC 9 02 Setup ENT CD Burn Speed A Cb Bum speed CD Burn Speed gt Medin Available speeds 40 32x 24 v 20x 16x 10x 4x 9 03 Setup ENT DVD Burn Speed A DVD Burn Speed DVD Bi S d Maxi Available speeds 16x 12x 8x urn Spee aximum v 6x 4x 2x 1 9 04 Setup ENT Read Speed A peed DVD Read Speed Read Speed Maximum Avsllablo spese Sex limited to 16x and 8x v 48x 40x 16x 8x ESC 9 05 Setup ENT Auto Start Drive A Options are Off Note Option 2 is not used Auto Start Drive OFF v 1 and 2 in the QD DVD duplicator 9 06 Setup ENT Start Up Menu A Options are Copy Test Test amp Copy St
15. enu follows Language The QD DVD duplicator has two language options English and Spanish English is the default setting CD Burn Speed The default CD record speed for the QD DVD is Maximum 40x The other available record speed options are 32x 24x 20x 16x 10x and 4x DVD Burn Speed The default DVD record speed for the QD DVD is Maximum 16x The other record speed options are 12x 8x 6x 4x 2x and 1x Read Speed The default CD read speed for the QD DVD is Maximum 52x The other read speed options are 48x 40x 16x and 8x Auto Start Drive The Auto Start Drive is used to automatically start recording once the master disc and blank disc are inserted into the drives There are 3 options for this setting Off 1 and 2 To use this feature change the value from OFF to1 The 2 setting is not used Once the value is set to 1 the system will automatically start recording once a master and blank disc are detected Startup Menu The Startup Menu selection allows you to select the main menu item that appears when the QD DVD duplicator starts up The default setting is 1 Copy Any of the 9 menu items can be selected Auto Verify The Auto Verify function can be turned On if you wish to verify every copy you make with the QD DVD duplicator The verify function checks the copied disc to see if it can be read It does not compare the copy with the master disc The default setting is Off Auto Compare The Aut
16. erify Default is Off 9 8 Auto Compare Default is Off 9 9 Auto Prescan Default is Off 9 10 Eject Disc Default is Eject Good Only 9 11 Burn Mode Default is DAO 9 12 Display Time Default is Off 9 13 Button Sound Default is On 9 14 Device Info 9 15 System Info 9 16 Quick Erase 9 17 Full Erase 10 Adv Setup 10 1 UnderRun Protect Default is On 10 2 Overburn Default is Off 10 3 Read Error Skip Default is Off 10 4 Burn in 10 5 Update Firmware 10 6 Compare Firmware 10 7 H W Diagnostic 10 8 Load Default 10 9 ISRC amp MCN Default is Off 10 10 Switch USB Mode 20 Appendix 2 LCD Messages Normal Conditions Initialize SDA sie inler em iile Initialize the memory of the system Detect Drives eki Detect what drives are connected with the system User AD M a a tha a dono DE Rl Cancel the job during operation ln ge PE MEKE ctus e EPI A Analyze the source disc Source drive is ready to read Target drive is not ready to write 0 Source disc is not ready to be read Target disc is ready to be written into Erasi
17. ion Please review the Setup Menu on page 13 for more details Quick Erase The Quick Erase function is used to Erase CD RW and DVD RW media This option performs the Quick erase of the disc Full Erase The Full Erase function is used to Erase CD RW DVD RW media This option performs the Full erase of the disc 16 Advanced Setup Menu ENT 11 01 Adv Setup ENT Under Run Protect Options are ON 11 Advanced Setup Under Run Protect G ON di Off i v v A ESC 11 02 Adv Setup ENT gt Overburn p Options are ON or Overburn Off Off v v A ESC 11 03 Adv Setup ENT Read Error Skip p Options are ON or Read Error Skip OFF Off v v ESC 11 04 Adv Setup ENT gt Burnin A gt Burnin To Be Used by Burmin Erase amp Copy Test Service Personnel v ONLY v ESC 11 05 Adv Setup ENT Update FW T 950 Firmware is Update Firmware To M 10Z YES YES updated A No v ESC 11 06 Adv Setup ENT Last update F W Compare Firmware OK v ESC 11 07 Adv Setup ENT Runs through H W Diagnostics controller diagnostics v ESC 11 08 Adv Setup ENT
18. k CD to CD Edit Press V button until the display reads 8 03 Edit Track Close Session Make sure your recorded audio CD is in the BOTTOM recorder drive Press the ENT button The following screen appears Close all disc s Sessions Yes Press the ENT button The display will indicate that the disc is being closed Once the disc is closed the following screen appears Close Complete OK 01 Fail 00 The disc is now complete USB Mode The USB Mode function is used to enter and exit USB mode using the recorder drive as an external burner fora PC The other functions of the QD DVD will not be available until you return the unit to Stand Alone mode Connect the QD DVD to a PC with a USB 2 0 connection for optimal performance NOTE If this menu option is not available please refer to pages 16 17 for instructions on how to access the Advanced Setup menu and enable USB Mode To use the USB Mode function press the A buttons until the display reads 10 USB Mode Press the ENT button The following screen appears USB L H Mode The QD DVD is now ready for using as an external burner connected to a PC Exiting USB Mode With the display reading USB L H MODE press the V A buttons to Back to SA Mode exit USB L H Mode The display will change to l The VA buttons allow you to change from Yes to No YES will reboot the QD DVD and return you to Stand Alone Mode NO will allow you to remain in USB Mod
19. nd CISC oco A GM The system is erasing the data on the disc FailtogetDrivelnfo The drive information cannot be obtained Fail to get Src Disc Info The information of source disc cannot be obtained Save new config Fail The new setting of configuration cannot be saved loadDefaultConfig Do you want to load the default settings PED e GE RR YMM PM The system is preparing to record Check Target Please Wait The system is checking the target device Audio Disc Can t The system cannot compare the audio discs le e pk ez om PETENS The comparison results are the same Readdiscerror During comparison the disc cannot be read The system cannot read the contents of disc TOC not malcly o Mapa Kadn The comparison results are not the same Target overflow The target disc hasn t enough capacity to store new data Target Disc Not The target disc still has data Press a Key to Eject Good Disc Press any key to eject the good disc after copying Press a Key to Eject
20. o Compare function can be turned On if you wish to Compare every copy with the master disc The Compare function only works with Data master discs If there is audio or video on the master disc the Compare function will not work The default setting is Off Auto Prescan The Auto Prescan function can be turned On if you with to Prescan every master disc before recording The default setting is Off Eject Disc There are 3 options for the Eject Disc setting 1 Eject good discs only 2 Eject all discs 3 Do not eject discs The default setting is to eject the good discs only 15 Burn Mode There are 3 options for the Burn Mode setting 1 DAO Disc At Once 2 TAO NotClose Track At Once not closed 3 TAO Track At Once closed The default setting is DAO It is recommended that this setting be used Display Time The display time function is used to display the total record time after the recording is completed The default setting is Off Button Sound The Button Sound function is used to turn on or off the beep sound a button makes when pressed The default setting is On Device Info The Device Info function displays a variety of information about the CD reader and writer including model number and firmware revision Please review the Setup Menu on page 13 for more details System Info The System Info function displays a variety of information about the controller module including model number and firmware revis
21. ompleted the display will read Compare OK 1 Fail O Diff O Press the V button and the following screen will appear Src 01 CD RW Total 15 2MB Press the V button again and the following screen will appear 00 CD RW dentical Prescan The Prescan function is used to verify master disc can be read correctly To use the Prescan function press the A buttons until the display reads 6 Prescan Place the master disc into the TOP reader drive and press ENT The Prescan starts and the following screen appears Scaning 24x 15 620 4MB 02 15 Once the scanning is complete the following screen will appear PreScan OK 10 Disc Info The Disc Info function displays information on the type of master disc placed in the TOP reader drive To use the Disc nfo function press the A buttons until the display reads 7 Disc Info Place the master disc into the TOP reader drive Press the ENT button The source is analyzed The following screen appears Source Disc Analyzing The following 4 screens display a variety of information about the master disc The screens are Session Ol Track Ol Track Ol Ol 37 0MB reached by pressing the V A buttons Total 01 Sessions Total Ol Tracks Total 04 15 Total 37 0MB Edit Track The Edit Track function allows you to select multiple tracks from different master discs and place them on one Audio CD The maximum
22. packing your duplicator confirm the following items are included QD DVD 1 to 1 duplicator Power cable Manual DVD R disc USB cable Zulu2 CD DVD recording software Installation Disc If any of these items are missing please contact or Microboards Technology Technical Support at 952 556 1639 IMPORTANT Please keep all the packing for your OD DVD duplicator If your unit ever needs to be sent in for service it must be returned in the original packing or the warranty will be voided Installation e Connect the power cable to the QD DVD duplicator and plug in to a protected power outlet strip or UPS power supply Note for Installation 1 The socket outlet shall be installed near the equipment and be easily accessible 2 Do not block cooling fans Turn on power to the duplicator The system will go through initialization and then display 1 Copy The system is now ready to use For USB Mode connect to a PC via an unoccupied USB port This mode must be selected in the Advanced Setup Menu See pages 16 17 Basic Instructions Buttons and LCD There are four buttons and an LCD on the front panel of the QD DVD duplicator LED display Shows the menu items and any status messages that may come up during operation ENT button The ENT button used to start a duplication process or enter into an area in the menu structure ESC button The ESC button used to stop an operation or move up the menu structure A button used to
23. r a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense European standards EN 55022 EN 55024 The CE mark has been affixed in accordance with the CE Marking This product is in conformity with the EMC Directive 89 336 EEC through compliance with the following C C Directive 93 68 EEC Canadian Department of Communications DOC Statement This Class A digital apparatus complies with the Canadian ICES 003 Issue 4 2004 Cet appareil numerique de la classe A est conforme a la norme NMB 003 du Canade 19 Appendix 1 List of Functions 1 Copy 2 Test 3 Test amp Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Edit Track for CD only 8 1 CD to CD Edit 8 3 Play Audio Track 8 4 Close Session 9 Setup 9 1 Language Default is English 9 2 CD Burn Speed Default is Maximum 9 3 DVD Burn Speed Default is Maximum 9 4 Master Read Speed Default is Maximum 9 5 Auto Start Drive Default is Off 9 6 Startup Menu Default is Copy 9 7 Auto V
24. scroll up in the different menus V button used to scroll down in the different menus Hardware Description Controller Interface Reader Drive Recorder Drive Power Switch Power LED The QD DVD system consists of a DVD reader DVD Writer USB Connection and Controller module The master discs always go into the TOP DVD Reader drive The blank media will always go into the BOTTOM DVD Recorder drive The power switch and power LED are also located on the front of the QD DVD duplicator The USB Connection is located on the back of the QD DVD The LCD display will show the different menu selections and also information pertaining to the recording process Here is a typical example of what is displayed during the COPY process Displays the function being performed such as Copying or Testing and shows the record speed during duplication Shows the percentage completed for this action Copying DVD 1269 5 MB Displays the amount of data left to be Shows the time remaining to recorded This number starts at the capacity complete this action This of the master and counts down number also counts down Main Menu Y
25. se any function while operating in USB Mode 18 Specifications e Product Name Quic Disc QD DVD e Max Read Speeds CD 52X DVD 16X e Product Interface ATAPI IDE e Max Write Speeds CD 40X DVD 16X e System Display LED e Dimension 6 8 x 7 5 x 11 25 H x W x D e Write Method Auto Detect DAO TAO e Weight 4 8 kg 10 7 Ibs e Operation Mode COPY TEST e Power Supply 100 240V 2A MAX PRESCAN 50 60Hz e Data Buffer 1 MB e Certification CE FCC e Firmware Upgrade Via CD ROM e Recommended Media Taiyo Yuden e Supported Formats CD ROM Mode 1 amp 2 CD DA CD ROM XA Video CD Game CD Mix Mode Multisession HFS CD Bridge Photo CD CD Extra DVD ROM DVD R DVD RW DL DVD VIDEO CAUTION Disconnect AC Power Cord Before Servicing High Voltages Present with Unit Powered Off and Line Cord Connected Technical Support For technical questions or support issues contact Microboards Technology technical support United States Europe Japan PH 952 556 1639 PH 44 0 845 230 7800 PH 03 3561 2266 FAX 952 556 1628 www microboards co uk www microboards co jp support microboards com www microboards com Please have the Model and Serial Number of your QD DVD available when contacting Technical Support Any unauthorized modification to this equipment may result in the revocation by the FCC of the user s authority to operate this equipment NOTE This equipment has been tested and found to comply with the limits fo
Download Pdf Manuals
Related Search