Metra Electronics 99-7318 User's Manual
Contents
1. trim plate into the radio housing Figure B Em 77 7 99 7318 FINAL ASSEMBLY FINAL ASSEMBLY A Strip wire ends back 1 2 B Twist ends together C Solder D Tape 1 Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter and making connections as shown Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit 2 Re connect the negative battery terminal and test the unit for proper operation 3 Reassemble radio and dash assemblies in reverse order of disassembly FINAL WIRING CONNECTIONS Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit Metra recommends making connections as shown below Strip Splice Solder Tape Isolate and individually tape off ends of any unused wires to prevent electrical short circuit METRA EIA WIRING CODE 12V Ignition Acc Red Right Front Gray 12V Batt Memory Yellow Right Front Gray Black Ground Black Left Front White Power Antenna Blue Left Front White Black Amp Turn On Blue White Right Rear Violet Amp Ground Black White Right Rear Violet Black Illumination Orange Left Rear Green Dimmer Orange White Left Rear Green Black NOTE When Black a wire is not present ground radi2. INSTALLATION INSTRUCTIONS FOR PART 99 7318 APPLICATIONS 2005 2006 Kia Spectra 5 99 7 318 KIT FEATURES e DIN Head Unit Provision e ISO DIN Head Unit Provision KIT COMPONENTS A Radio Housing B ISO Brackets C ISO Trim plate TOOLS REQUIRED Phillips Screwdriver Small Flat Blade Screwdriver L 1 800 221 0932 www metraonline com COPYRIGHT 2004 07 METRA ELECTRONICS CORPORATION EM Z77 7 99 7318 TABLE OF CONTENTS Dash Disassembly naar 1 AIL ASSOPMIDIV iia 2 3 Final Assembly socia 4 EM 27 27 2005 2006 KIA SPECTRA 5 99 7318 DASH DISASSEMBLY 1 Disconnect the negative battery terminal to prevent an accidental short circuit 2 Unclip and remove entire panel sur rounding radio and including A C controls Figure A 3 Remove 4 Phillips screws to extract radio from dash Figure B EE 77 99 7318 KIT ASSEMBLY 1 2005 2006 KIA SPECTRA 5 DIN HEAD UNIT PROVISION Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down Figure A Slide the aftermarket head unit into the cage and secure Figure B E 27727 2005 2006 KIA SPECTRA 5 ISO DIN HEAD UNIT PROVISION 99 7318 KIT ASSEMBLY 1 Mount the ISO bracket to the head unit with screws supplied with the unit Figure A 2 Slide the head unit into the radio opening until the side clips engage Figure B 3 Snap the
3. o to vehicle chassis All colors may not be present on all leads due to manufacturer s specifications 4 EE 77 99 7318 FINAL ASSEMBLY NOTES WT 99 7318 INSTRUCTIONS L 1 800 221 0932 m www metraonline com REV 08 24 07 COPYRIGHT 2004 07 METRA ELECTRONICS CORPORATION INST99 7318
Download Pdf Manuals
Related Search