Metra Electronics 99-7310 User's Manual
Contents
1. Re connect the battery terminal and test the unit for proper operation Mount the head unit kit assembly to the sub dash with 4 Phillips screws previously removed in step 12. rev 240701 KIT FEATURES Mela Pa Metra Division of METRAC em 150 head unit provisions 99 7310 INSTALLATION INSTRUCTIONS KIT COMPONENTS Radio Housing APPLICATIONS CAR PAGE HYUNDAI Accent 2OOO ED Fessescesccaseetaareresvsiicctetiet estenatarceitss 2 4 10 x34 Phillips Pan head Screws TOOLS REQUIRED Phillips screwdriver N 1 800 221 0932 www metraonline com COPYRIGHT 2001 METRA ELECTRONICS CORPORATION ALL VEHICLES Disconnect the negative battery terminal to prevent an accidental short circuit Open the cupholder and remove 2 Phillips screws exposed Lower the glove box and detach the vent cable exposed Reach under the driver s side dash and detach 2 vent cables located above the accelerator Unclip the dash trim bezel and remove Remove 4 screws securing the factory head unit and disconnect the wiring Snap the ISO Brackets over the mounting tabs on the Radio Housing A Strip wire ends back 7 B Twist ends together C Solder D Tape Slide the head unit into the Radio Housing align Locate the factory wiring harness in the the holes in the head unit with the holes in the dash Metra recommends using the Housing and mount the unit with the screws proper mating adaptor and making supplied with the unit connections as shown Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit
Download Pdf Manuals
Related Search