Metra Electronics 95-7321 User's Manual
Contents
1. INSTALLATION INSTRUCTIONS FOR PART 95 7321 APPLICATIONS Hyundai Accent 2006 2010 Kia Rio RIO 5 2006 2010 Kia Sportage 2005 2010 953 7311 KIT FEATURES e DDIN Head Unit Provision e 50 Stacked Head Unit Provision KIT COMPONENTS A DDIN Brackets DDIN Trim Plate WIRING AND ANTENNA CONNECTIONS Sold Separately HARNESS e 70 7303 Hyundai Kia Harness 2009 e 70 1004 Hyundai 2006 up KIA harness 2004 up ANTENNA ADAPTER e 40 11 KIA antenna adapter 2007 up e 40 KI10 KIA antenna adapter 2007 up TOOLS REQUIRED Phillips Screwdriver Small Flat Blade Screwdriver e Panel Removal Tool Cutting Tool METRA THE WORLD S BEST KITS 1 800 221 0932 m www metraonline com COPYRIGHT 2010 METRA ELECTRONICS CORPORATION MC TABLE OF CONTENTS Dash Disassembly an 1 2 MEP das 3 KILASSEIIDIV icti ion CREE ERE 4 R D net EDGE I HE 51 EIL E paar EE A eck den by LE app bag x WES EE LEE erc Lea ed KE EDI Km ET Sus o E cca dr aed Metra recommends MECP certified technicians mmm 7 35 7381 DASH DISASSEMBLY HYUNDAI ACCENT 2006 2010 KIA RIO RIO 5 2006 2010 1 Disconnect the negative battery terminal to prevent an accidental short circuit 2 Unclip and remove the trim panel surrounding the radio and including the a c vents Figure A 3 Remove 4 Phillips sc2. B 95 7321 NOTES WT 95 7321 INSTRUCTIONS THE WORLD S BEST KITS 1 800 221 0932 m www metraonline com REV 04 26 10 COPYRIGHT 2010 METRA ELECTRONICS CORPORATION INST95 7321
3. rews securing the radio Figure B 7 A 935 7381 DASH DISASSEMBLY KIA SPORTAGE 2005 2010 1 Disconnect the negative battery terminal to prevent an accidental short circuit 2 Unclip and remove the entire panel surrounding the radio and including the A C controls Note Start at bottom of panel Figure A 3 Remove 4 Phillips screws to extract radio from dash Figure B EEBZLL 95 7321 KIT PREPARATION 1 HYUNDAI ACCENT Cut and remove shaded areas Figure A 2 KIA RIO Cut and remove shaded areas Figure B 3 SPORTAGE Cut and remove shaded areas Figure C 7 95 7381 KIT ASSEMBLY DOUBLE DIN STACKED ISO DIN HEAD UNIT PROVISION 1 Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter from Metra or AXXESS Re connect the negative battery terminal and test the unit for proper operation 2 Attach the Double DIN brackets to the inside edge of the Double DIN trim plate Figure A 3 Slide the Double DIN head unit or stacked ISO head units into the bracket radio housing assembly and secure the Double DIN head unit or stacked ISO head units to the assembly using the screws supplied with the radio Figure B 4 Reassemble dash in reverse order of disassembly
Download Pdf Manuals
Related Search