LOREX Technology CNC1020 User's Manual
Contents
1. Camera Features Camera Features e Patented Mirroring Technology Makes Camera Invisible to the Human Eye Yet Allows The Camera to Properly View e Security Mirror Form Factor is Ideal for Commercial Retail Applications e Cable Pass through Wall Mount Bracket Conceals and Protects Connection Cables e Ceiling flush mountable or wall mountable using included cable pass through bracket Ceiling Flush Wall Mount Mount Package Contents 1 x Color Concealed Security Mirror 1 x HEX Adjustment Key Camera with Mounting Stand For Mounting Stand WARNING REGULATED 12V DC 500mA power supply is provided for use with this camera Use of a non regulated non conforming power supply can damage this product and will void the warranty Mounting Options Mounting Options The Camera can be installed to a wall or ceiling or can be ceiling flush mounted using included cable pass through bracket Wall Mounting 1 Mount the camera to the desired mounting surface by firmly attaching the Mounting Bracket using 4 screws at points listed as Screws 1 4 on the below diagram 2 Use the Hex Adjustment Key to set the desired angle of the camera at points A B and C on the above diagram 3 Connect the Extension cable to the camera Installing the Camera amp Optional Extension Cable Ceiling Mounting 1 Remove the Mounting Bracket from the back of the Camera 4 screws 2 Drill a hole in the ceiling large enough to pass the B2. NC Power Cable through NOTE If using the Ceiling Mounting method run the Extension Cable to the location prior to mounting the Camera 3 Connect the BNC Power Cable end of the Camera to the BNC Power connections on the Extension cable before installing the Camera Base 4 Screw the Camera Base to the ceiling 5 Angle the Camera by loosening the side screws Set the desired angle and tighten the screws 6 There are two screw holes on the Dome cover align these holes with the screw holes on the base Once the holes are aligned adjust the Dome Insert so that the opening is aligned with the Lens Place the Dome Cover over the Camera and Base making sure to align the dome cover holes with the holes on the camera base 7a Screw the two side clip screws on the Dome Cover into the base to hold the dome cover in place 7b Use the Rubber Dome Ring to seal the Dome to the Base Installing the Camera amp Optional Extension Cable Installing the Camera amp Optional Extension Cable 1 Connect the optional Extension cable to the Camera e Connect the BNC amp Power ends of the cable to the Camera e Connect the Power Adaptor connector to the AC Power Cable attached to the camera Remember to check the ends of the cable before permanent installation as the power connection ends are different one side has a female barrel power connection and one end has a male power plug VIDEO INPUT CAMERA Conne
3. ct the BNC Connect the BNC cable to the video and Power cables input of the monitor to the Camera and connect the power adaptor to an outlet 2 Connect the BNC end of the Extension Cable to the DVR Observation System or to a TV VCR NOTE Connect the BNC to RCA Adaptor as needed to allow for proper connectivity Camera Setup Diagram 3 Connect the A C Power Adaptor to the Extension Cable Black connector Plug the Power adaptor to a wall outlet Camera Specifications Camera Specifications Wis S AES AES Min Illumination 0 2 LUX Sens up up to x32 12V DC 10
Download Pdf Manuals
Related Search