Home

Loewe L 32 User's Manual

Contents

1. 32 Search for and store the station of the video recorder if no Euro AV cable is available Switch on the test station on the VCR or insert a recorded tape and start playback In some video recorders the station must be switched on by activating the modu lator Then call the AV selection on the TV set with 0 AV Select the menu item VIDEO in the AV selection and call using OK To prevent normal TV stations being found in the search pull out the antenna plug from the antenna input of the VCR temporarily the cable to the antenna system If you cannot see the test station or playback from the cassette the VCR is transmitting on a different channel You then have to search for the station or set it manually Call the TV menu with the MENU button Select the Settings menu item with 4 gt Select the line below using e and use 4 to select Stations Select the line below using w and select Manual adjustment using 4 gt and call this menu using OK 5 Enter channel E30 under the Channel menu item Antenna cable analo gue select in this menu above if necessary 6 Start search with the blue coloured key 7 When the station has been found change the name if needed confirm with OK and save with the red coloured key 8 A list of the stored stations is displayed 9 Select 0 VIDEO here and overwrite this station storage location using the red coloured key 10 Hide th
2. Allow switching voltage to display the signals of the connected device imme diately on the screen via Euro AV during playback e RGB insertions at AV2 to play back RGB signals at all station storage locations Select decoder stations and set sound encoding Under Settings you will find the following functions Stations Here you can search for and store new stations automatically or manually With Change stations you can rearrange and delete the stations and change station names not for DVB T stations in UK e Search wizard Manual adjustment Change stations ZN Operating modes TV Parental lock You can lock the TV from immediatly daily for a certain period of time or agerelated for DVB programmes with age restrictions Here you determine the PIN to enter if you want to watch locked programmes Timer functions You can have your TV switch off at pre programmed times or wake you remind you with radio or TV If you are not present at the time a safety prompt makes sure the TV switches off again after 5 minutes e Switch off today only Switch off daily One time reminder e Wake up Mon Fri Wake up Sat Wake up Sun e Wake up with Wake up signal volume Language If your menu language is not set you have to select the Language menu in a language that you do not understand Therefore here is a simple way to set the right menu language 1 Press the INFO but
3. 43 810 0810 24 zum Ortstarif E Mail loewe loewe co at International Dynamics Australasia Pty Ltd 129 Palmer Street Richmond 3121 Victoria Australia Tel 61 3 94 29 08 22 Fax 61 3 94 29 08 33 Email mail internationaldynamics com au CODA Loewe Opta Benelux NV SA Uilenbaan 84 2160 Antwerpen Belgi Tel 32 3 2 7099 30 Fax 32 3 2 71 01 08 Email ccc loewe be CH Telion AG R tistrasse 26 8952 Schlieren Schweiz Tel 41 44 732 15 11 Fax 41 44 732 15 02 Email infocpe telion ch C HADJIKYRIAKOS amp SONS LTD Prodromou 121 PO Box 21587 1511 Nicosia Cyprus Tel 357 22 87 21 11 Fax 357 22 66 33 91 Email Efthymios hadjikyriakos com cy CD Ing Ivo Tietz Dolni nam 9 746 01 Opava Cesko Tel 420 553 624 944 Fax 420 553 623 147 E mail tietz opava cz CD Loewe Opta GmbH Customer Care Center Industriestra e 11 96317 Kronach Deutschland Tel 49 1801 22256393 Fax 49 9261 99500 Email ccc loewe de GB 46 Kjaerulff 1 A S C F Tietgens Boulevard 19 5220 Odense S Denmark Tel 45 66 13 54 80 Fax 45 66 13 54 10 Email mail kjaerulff1 com CE Gaplasa S A Conde de Torroja 25 28022 Madrid Espana Tel 34 917 48 29 60 Fax 34 913 29 16 75 Email loewe maygap com d Loewe Opta France S A 13 rue du D p t Parc del l Europe BP 10010 67014 Strasbourg Cedex France Tel 33 3 88 79 72 50 Fax 33 3 88 79 72 59 Ema
4. If you want to search for new stations for example use w to select Stations in the line below Stations The menu contains the automatic station search and the manual station setting You can re sort stations enter and change station names and delete stations The info text indicates which settings you can make in Stations Use e to select the line below for example Search wizard Search wizard Use this menu to search for stations automatically once certain settings have been made If you want to search for stations with other than the displayed settings select the Change settings menu gt Manual adjustment Chan Ss Search wizard The info text explains how you are to proceed Upon delivery the TV set is configured so that the info texts are always displayed Automatic info yes In this case you can hide the info texts by using the INFO button You can also configure the TV set so that you call the info texts when needed by using the INFO button Automatic info no You can find the setting to switch the automatic info option on or off via TV menu under Settings Miscellaneous On screen displays Automatic info yes no 17 GB Daily operation For example you want to have the TV set switch off automatically Select the index item Switch off Automatic For the index Using the index you can access many operational functi
5. gt Use e to access the associated selection Set as described in the Image menu above The standard setting at delivery of the set is Image on GB 24 Image demo mode In order to show the way Image works a Demo mode is integrated In Demo mode the current picture is divided into two parts The left half of the picture is shown in normal mode the right half in the Image optimised mode Image off Image on Operating modes PIP Picture in picture PIP Note The coloured keys do not work as described below with DVB T stations in UK but they operate as described on page 30 Digital Teletext Picture in picture displays are possible if the set has an analogue PIP tuner or a di gital satellite tuner in addition to the analogue TV cable tuner You can have a PIP tuner or a digital satellite tuner retrofitted Set specific equipment and retrofitting options for PIP and satellite tuners see pages 44 and 45 If there is no other tuner installed you can use PIP AV PIP when playing a video recorder or DVD player For a retrofitted PIP tuner the following PIP displays are possible Main picture analogue PIP picture analogue Main picture digital PIP picture analogue The following is not possible Main picture digital PIP picture digital Main picture analogue PIP picture digital For Split screen the PIP picture is displayed on the right side of the screen Both
6. It is recommended that these images are not displayed for long periods Note Permanent image retention on a Plasma TV resulting from fixed image use is not an operating defect and as such is not covered by the warranty You will be reminded of this warning through an on screen message after switch on It will not appear if it is deactivated in the menu To do this press Menu followed by selection of Settings Miscellaneous On screen displays Automatic Info then finally select No alternatively it will automatically stop appearing after the menu has been entered twenty times The TV set with plasma screen you have purchased meets the highest quality requirements and has been tested for pixel errors Despite the utmost caution in production of the displays it cannot be totally ruled out that some of the pixels might not light up for technological reasons Please understand that such effects cannot be considered a unit defect as defined by the warranty as long as they are within the limits specified by the standard For plasma screens the emission of light decreases the longer the unit is used Plasma screens work by using phosphor In certain operating conditions this technology may facilitate image burns These operating conditions include e Lengthy continuous display of a freeze picture gt 10 minutes e Constant display of the same background e Use of a format that does not entirely
7. station forward back DISC Title Chapter overview RADIO station table MENU confirm menu selection Yellow button Zoom Blue button Set marker DISC short next chapter title long search forward RADIO short fine tuning forward long search forward Stop Pause single frame slow motion Set remote control The specified key combination must be pressed approx 5 s until one of the LEDs flashes twice The remote control can be set for the different devices as follows Device Hot keys Loewe TV Chassis L2650 Dest Loewe Centros 11x2 d Loewe Centros 12x2 2 1x2 Loewe ViewVision DR Loewe ViewVision 8106 H e 2 e 7 Loewe Auro 2216 PS 8116 DT G Loewe Xemix 6222 PS D Factory setting Functions for the Loewe DVD recorders Centros 12x2 21x2 ViewVision DR TV Sound off on LED indicator for current operating mode Switch over to operate TV set Switch over to operate Recorder Timer recording menu timer recording list menu STOP Select station directly MENU enter numbers or letters STOP Call AV selection AV1 AV4 DV TV ViewVision DR PLAY skip 15 Sec User interface of loaded DVD MENU original and playlist IN Show hide menu V V TV Volume down up MENU select set Green button ShowView menu Red button new chapter marker Playback PLAY press short Start of current chapter previous chapter PLAY press long search back PAUSE press short s
8. 0 84 4x62 8x26 3 99 1x71 9x26 3 107 0x73 5x26 3 Set weight with stand ca kg 14 3 21 0 22 4 43 2 Display HD LCD technology HD LCD technology HD LCD technology HD Plasma technology Picture diagonal cm picture format 66 16 9 80 16 9 94 16 9 106 16 9 Resolution 1366x768 1366x768 1366x768 1024x1024 Contrast ratio 1200 1 1200 1 4000 1 dyn 3000 1 Luminance cd m cd m cd m cd m2 Angle of viewing horizontally vertical Power consumption IEC 62087 in operation watt 65 70 85 10 100 11 300 315 in standby watt lt 3 a3 lt 3 lt 3 U e Ambient temperature Celsius 35 Relative humidity not condensing 20 80 800 1114 hPa 0 2000 m above sea level Technical data Electrical data Chassis name Power supply Tuner VHF UHF cable Hyperband 8 MHz Station storage locations TV standards Colour standard Sound standard Rated audio power for Xelos Rated audio power for Modus Analogue teletext Page memory for Xelos Page memory for Modus Digital teletext only for MHEG 5 version x27 x28 L 2650 220 V 240V 50 60 Hz 41 MHz to 860 MHz 1680 B G L D K M N DVB T DVB C DVB S SECAM PAL NTSC NTSC V PAL V 60Hz Mono Stereo Dual channel Nicam B G I L Virtual Dolby 2 x 20 watt 2 x 15 watt TOP FLOF Level 2 5 3000 1500 MHEG 5 Connections Jack 3 5mm Headphones 32 2000 ohm Mini DIN AVS Video IN VIC S VHS Hi 8 CVBS VHS 8mm Cinch yello
9. 82 This station is switched later to this programme when the set is switched on If the TV is off it switches on again automatically at the beginning of the marked programme if this has been set in the EPG menu If you are out a security prompt prevents the TV set staying on unattended Before leaving the upper selection lines using the blue coloured key select a specific line If you have switched back to the programme list you can change this menu line using 4 without having to leave the programme list Programming recording for recorders The programme marked using the e a buttons can be prepared for recording by pressing the red coloured key In the following menu confirm the timer data or change them as required Then a red dot is set in front of this programme in the EPG programme list as an identification if timer data is being transferred to the recorder no red dot is set If you select this programme you can delete it trom the timer using the red coloured key if the timer data has been transferred to a recorder the timer has to be deleted there EPG menu Call EPG menu INFO END ER AU Ml Select provider lt Station select Timer list LU You will find the following settings in the EPG menu e Select provider Station selection Timer list e Switch on TV when marked e Data capture Selecting providers and stations If you want to change the provider for analogue TV reception the station
10. Fax 64 9 379 0279 E mail enquiries internationaldynamics co nz GE Videoacustica Estrada Circunvalacao Quinta do Paizinho Arm 5 2795 632 Carnaxide Portugal Tel 351 2 1424 17 70 Fax 351 2 14 18 80 93 Email office videoacustica pt DSV TRADING SA Plac Kaszubski 8 81 350 Gdynia Polska Tel 48 58 6 61 28 00 Fax 48 58 661 44 70 Email market dsv com pl Service Center Loewe ul Verkhnaya Maslovka d 29 125083 Moscow Poccus Tel 7 495 612 50 43 Fax 7 495 612 47 10 Email service atc ru Kjaerulff 1 AB Ridbanegatan 4 Box 9076 21377 Malm Sverige Tel 46 4 06 79 74 00 Fax 46 4 06 79 74 01 Email Sweden kjaerulff1 com GK BaSys Czech amp Slovak s r o Stara Vajnorska 17 A 831 04 Bratislava Slovakia Tel 421 2 49 10 66 18 Fax 421 2 49 10 66 33 Email loewe basys sk Jadran Trgovsko Podjetje Partizanska cesta 69 6210 Sezana Slovenija Tel 386 57 31 04 40 Fax 386 57 31 04 42 Email milos zvanut jadran si Enkay Elektronik Servis M d rl g Alemdag Cad Site Yolu No 10 Umraniye Istanbul T rkiye Tel 90 216 634 44 44 Fax 90 216 634 39 88 Email mhatipog enkaygroup com ZA Videonix Pty Ltd PO Box 31952 Kyalami 1684 Republic of South Africa Tel 27 1 14 66 47 00 Fax 27 1 14 66 42 85 Email mail loewe co za Printed in Germany 5 02 07 10 0 Ps Subject to modifications
11. Refer to the operating instructions for the audio amplifier to be connected Select Digital under Audio transmission for digital audio amplifiers Con nect the digital audio output of the TV AUDIO DIGITAL OUT to the digital audio input of the digital amplifier Assign the digital audio input to the socket through which the corresponding pic ture is transmitted e g AV2 if a DVD player is connected there Then the digital sound is passed to the digital audio output of the TV set and fed to the external audio amplifier via this Specify which sound formats can be decoded with your digital amplifier Dolby Digital MPEG dts Specify under Type of amplifier whether the digital amplifier is a stereo or surround amplifier If it is a surround amplifier specify whether or not the TV loudspeakers are to be used as centre loudspeakers Connect the centre output of the amplifier to the centre output of the TV using a cinch cable if necessary Note do not use the centre loudspeaker connection on the amplifier instead use the pre amplifier centre output AUDIO IN AUDIO DIGITAL C OUT a _ AV2 III NN e d UI Ill 36 Select Analogue for Sound transmission for analogue audio amplifiers The sound for the analogue amplifier is transmitted via the AUDIO OUT L R connec tions of the TV to the audio amplifier Connect the amplifier with two
12. T Auto volume l AV audio signal Maximum volume Balance use e to select the auto volume option TV menu Auto volume DE op Use 4 to select on and activate the auto volume INFO END TV menu Auto volume ott Ton Press the END button to hide the menu INFO END Apart from the TV menu shown here other menus can be opened in TV mode as follows Call the Sound menu directly Quick calls for Image teletext subtitles personal text pages headphone volume scan stations and to move the picture up and down Green coloured key Call standard settings for picture and sound Using the volume control you can also open other sound settings such as Sound via Sound adjustment Sound effects and Loud ness The key a or OK must be pressed for the duration of the volume display for this Daily operation For the info system For each menu point an info text is displayed at the top of the picture to help you with the setting This saves you from having to refer back to the operating instruc tions We shall demonstrate this using the station search option as an example Call the TV menu Select Settings Settings Here you can search for the stations automatically or manually as well as set the menu language timer functions parental lock on screen displays etc p se ie Hr gr a aT eee e SI A DA Wr a AP EIE
13. TEXT Index Teletext im Ersten gt 101 Sr Call the TOP table Bulmahn Bildung statt Eigenheim Wird auch der Nahverkehr teurer Are ded a The TOP table is a general list of teletext You can only call the Tote bei Zugungl ck in Schweden j table for stations that use the TOP operating system Tennis Haas unterliegt Hewitt SUMAN BNAUNY Sta genneim U Formel 1 Schumacher erneut vorne Wird auch der Nahverkehr teurer 121 SCH a BEE EEN 122 532 Tagesschau 110 112 Kultur Gesellschaft 200 600 Lotto Toto TV Guide 300 400 Wirtschaft Internet www ard text de Inhalt tagesschau Page selection reicht _ tagesschau Vorhersage 204 Wetter St dte 213 Sport 1 Regional TV Guide Reisen ARD heute int Stadte ARD morgen Biowetter FS Sendungen Many stations use the TOP operating system some use FLOF e Q CNN Your TV Da supports both these systems The pages are divided into topic groups and topics View After switching on the teletext up to 3 000 pages are stored for Xelos and 1 500 pages for Modus for fast access Page selection with the coloured keys The coloured bars in TOP or the coloured writing in FLOF in the next to the last line show you which coloured keys you can use to scroll to topic groups and Enter the page number directly topics Use w a to select the topic group Select the topic column using gt Select the topic with a and display page wi
14. We shall demonstrate how to navigate with the menus using the TV menu as an example You can see which buttons you can use in the dark blue field on your TV set Open TV menu in TV mode Picture Here you can adjust among other things Contrast colour brightness picture adjustment sharpness picture format Select the function in the TV menu e g Sound for sound settings Use to move the menu points displayed on the right into the dark blue field use 4 to move the menu points displayed on the left TV menu m gt Recording Connections Settings D Select the sound function below with e or OK you will then see a list of the sound settings TV menu INFO END Treble Bass more In the sound settings also select the function with 4 gt e g Bass for increasing or reducing the bass tones TV menu Bass lt gt D INFO END To set the bass tones use e or OK to select the setting bar underneath O S E e 0 16 Ki menu Set the bass tones by using 4 gt If you want to make other sound settings move up with 4 to Bass and select with 4 gt e g more You can also move up further to Sound by using and select other settings in the TV menu such as picture settings INFO END INFO END I Loudspeaker soundi He Select the sound setting using 4 gt e g Auto volume and INFO END sound
15. analogue sound transmission Connect the analogue audio outputs of the DVD player to the AUDIO IN L R sockets on the TV set The sound is reproduced via the TV speakers If you want to use the digital sound of the DVD player with a digital audio ampli fier connected to the TV make a connection between AUDIO DIG OUT of the DVD player and AUDIO DIGITAL IN of the TV set Log in the component device in the connection wizard Assign the AUDIO DIG IN input here to the COMP IN socket provided a digital audio amplifier is also connected You can make the other settings for the audio amplifier as described for digital amplifiers on page 36 Set the signal at the component input in the connection wizard Set to Automa tic first If the signal is not reproduced when playback is started consult the ope rating instructions of the DVD device connected to find out what screen resolution is possible SDTV HDTV or ProScan Select the component connection in the AV selection Call AV selection AN selection MI DVI COMP IN Sr VIDEO VCR I DVD AVS VGA HDMI D Select COMP IN sockets and use to call b Start playback on the connected device Set Geometry and Colour standard as described for VGA XGA connection Operating additional equipment Operate Loewe DVD player and recorder with the remote control Use the remote control to operate one of the DVD players Use the remote control to operate a re
16. changed the provider broadcasting the digital teletext makes an intro ductory offer for this service on the screen via menu selection Follow these notes If no message appears telling you how to switch to digital teletext after switching to another station press the TEXT key If a selection for DVB subtitles is available this item must be hidden before CHIEF S AMAL TEES TESTEN ER Toe Cee Pel fiat Depending on the provider s respective offer you can use the w a 4 buttons and the OK button the coloured keys the END TEXT button and sometimes even the numeric buttons If you want to close the digital teletext just select a different station using the P P buttons or follow the menu prompts on the screen Notes e Digital teletext is not available when DVB subtitles are being displayed e Ifa timer recording is programmed at the TV set at the start time of the recor ding the digital teletext mode is switched off automatically Operating modes Radio Radio You can only receive radio stations via DVB If you do not have any DVB radio reception you can play a sound signal from an external device using the TV set via the sound AV inputs Use the RADIO button on the remote control or the R on the control ring of the TV set to switch the radio on or off RADIO Numerical 18 00 18 10 Nachrichten ok Switch to Scan stations END gp a Select station Previous station MENU Screen off on Change sor
17. maximum volume and balance Picture settings Open the TV menu TVmen INFO END gt Sound Recording Connections Settings H O Select Picture with 4 and selection with w Use 4 to mark image functions to be set Use for the related selection setting TV menu INFO END O and use 4 to set select Picture settings Picture adjustment Contrast Colour Brightness and Sharpness Under more you can find settings for Image Picture format Move picture up down Auto format Film quality improvement DMM and DRM Digital Refresh Mode Direct control on TV set On page 4 you can find illustrations of the control units located on the set Switching station on the TV set Station up with the button 8 Station down with the button Switching the radio on off or switching over to the radio Press R to switch the radio on or off Additional functions via the menu In the radio or TV operating modes you can make settings for Volume Brightness Contrast Picture format and Stations Service is intended for the customer service department use M to call the menu Direct control on TV set O D j lt gt use or to select the function to be set Use M to move one level up you can use or to select other functions Operating modes TV TV For the status display the DVB station providers may offer additional selection options
18. pictures share the screen in two equal halves For the Small PIP setting a small picture is displayed in the TV picture The green bar frame indicates that the control commands have an effect on the PIP picture The white bar frame means that the control commands have an effect on the main picture Use the green coloured key to switch between the PIP picture and the main picture for example to change stations The frame or bar between the pictures is green for the time being Show hide PIP picture PIP picture as freeze picture The bar frame has to be green If not press the green co loured key If you press the red coloured key the PIP picture freezes Press again moving picture Selecting the station of the PIP picture The bar frame has to be green If not press the green co loured key Then select the station as usual wu Der Wilde Westen 21 Es Select the station of the TV picture main picture w The bar frame has to be white If not press the green coloured key Then select the station as usual Note With UK sets you switch over from the green to the white bar frame by using the PIP key By pressing on the PIP key once more PIP is switched off ig A ki a e Schatten RT HIN E The bar frame has to be green If not press the green co loured key Start scanning the stations using the blue coloured key The bar frame turns blue The st
19. signal from the TV set or another sound source which is recei ved at one of the Euro AV sockets of the TV set is converted into a digital signal PCM and output at the AUDIO DIGITAL OUT socket Conversion from external analogue AV sources to PCM is not possible if the TV s loudspeakers are used as a centre channel In this case connect your audio amplifier additionally to the TV AUDIO OUT L R with a cinch cable and switch the audio amplifier to analogue audio input The digital TV sound or the digital sound of a connected auxiliary device is only audible via an external digital audio amplifier e g Loewe Auro system Operating additional equipment Connecting Loewe DVD Preceiver Auro 2216 set AUDIO DIGITAL OUT to the DIGITAL IN input of the Preceiver using a cinch e cable Connect the TV socket SERVICE to the TV L Link socket on the Preceiver PS and Individual Sound loudspeaker system using the L Link cable provided with the Preceiver Switch on the TV set and the You can play audio signals from the TV or DVD player in cinema quality with these Preceiver Via the L Link the TV recognises whether the Preceiver is connected components In addition to the subwoofer illustrated below the Individual Sound Select the Tremo loudspeaker system in the DVD menu of the Preceiver set system includes up to 5 loudspeakers for the front center and surround reproduc the listener speaker distances and adjust the speaker levels Pl
20. the PIP menu PIP must be active green frame Select Type and then Split Screen all PIP Split screen Operating modes EPG EPG Programme guide When receiving digital terrestrial and digital satellite stations you may find that oe a two identical EPG data are displayed in the EPG DVB menu for one station If EPG is an electronic programme guide With this system you can easily find he you call the EPG menu in the EPG mode by using the MENU button then select programmes that interest you sorted according to day time stations and topics Station selection you can select the duplicate station and deactivate it by using You can mark programmes and programme recordings OK Depending on whether you are receiving analogue stations by cable antenna or You have direct access to the selection lines above to pre select the day the time digital stations you will have different programme guides the station and the topic A wizard is activated the first time you use EPG not with DVB which guides you em Blue coloured key Call Select date time stations topics through the necessary settings Then run the data capture see next page Ee EPG Electronic Programme Guide Fri 10 09 14 14 Date Using the EPG ate om ions all ee EPG Switch EPG on oft Topics ES EPG Electronic Programme Guide Fri 10 09 14 14 r 06 00 06 30 RTL Wunderbare Jahre Date 7 Fri10 09 77 i 06 00 06 25 kabel Denni Time 0 soon
21. the mains plug pull the plug housing and not the cable The wires in the plug could be damaged and cause a short circuit the next time it is plugged in First installation Remote control Batteries To insert or change the batteries press on the arrow Slide the battery compart ment cover downwards and remove it Insert LR 03 alkaline manganese batteries AAA and ensure that the and ends are positioned correctly Then push the cover back on from the bottom Note on disposing batteries The batteries provided contain no harmful materials such as cadmium lead or mercury Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses Setting up the remote control for operating the TV How to operate other Loewe equipment is described on page 39 Press the TV button Connection Power mains Remove the cover for the connections Connect the TV set to a 220 240V 50 60 hertz power outlet For the LCD sets plug the small plug of the mains cable into the mains socket on the rear of the TV set plug the large mains plug into a mains socket For Plasma sets the mains cable is permanently connected to the set Antennas Plug the antenna plug of your antenna cable system or the room antenna for DVB T into the ANT TV socket Tuner 1 220
22. the status with a grey bar Do not switch your set off during this time This process may take up to one hour You will be informed when the process is completed LA After the software is updated you will be asked to switch your TV set off and back on again using the on standby switch If the update was not carried out you will be asked several times when you switch on the set whether you want to carry out this update CA module has established itself as the usual market name This cannot be taken into consideration in the menu yet Operating modes TV Image Image is a picture improvement specially developed by Loewe which delivers a sharper lifelike and colour fast picture richer in detail and contrast Image is not integrated in the Xelos A26 32 sets Image menu Call the menu Additional functions NRO ENE Image Teletext subtitles Personal teletext pag Use w to move to the corresponding selection setting Imaget mo Em and use 4 to select set and use Additional functions Imaget CRE off I Demo ok Activate to activate In the Image menu the functions Image on off and Demo can be set The Image settings can also be opened via the TV menu Picture Call up TV menu Use 4 to mark Picture EEN TV menu gt Sound Recording Connections Settings Use w for associated selection and mark more with
23. to move the picture up and down INFO END Additional functions Teletext subtitles amp gt Personal teletext Call timer overview If timer recordings have been programmed you will see when which station is recorded here TEXT Detail New recording Change Delete Select picture format see The TV set sets the best picture format automatically when Auto format is switched on If you want to set a different format press this button until the desired format is selected or select the format with 4 gt Picture format gt 4 3 Panorama Cinema Zoom In sets with an LCD screen you can switch the panorama picture over to distorti on free representation Dark margins are then visible on the left and right of the picture Switching over Keep the M button on the set pressed at the same time press the Picture format button on the remote control briefly Resetting Press the same button combination again Move picture up down gt To make picture subtitles visible you can use a e to move the picture up or down with the picture formats Panorama e Cinema and Zoom Note for DVB T stations in UK you can switch back and forth quickly between two stations using this button TV menu Call up the TV menu INFO END gt Sound Recording Connections Settings Picture adjustment You will find a description of the picture and sound settings on page 19 The TV m
24. which transmits EPG data to have other stations evaluated you can do this under Select provider Select Select provider and call this menu using OK If the station you want to switch to is not listed in the Select provider list then use the yellow coloured key to start the automatic search for stations with EPG data This takes a while Or if you know the station that transmits EPG data press the blue coloured key to compile manually Select the provider in the station list and adopt it by using OK and return to the provider selection using 4 Select the provider in Select provider and adopt it using OK Then a station list search is performed The stations offered by the provider are displayed in a list 28 First all stations are marked with the B symbol so that their data is display ed in the programme guide precondition provided EPG data is broadcast for the respective station Stations indicated by D are analogue terrestrial cable Stations stations indicated by 9 are DVB T stations stations indicated by D i are DVB C stations and stations indicated by amp are DVB S stations These stations are available for evaluation in the programme guide Select the stations you want to omit from the programme guide one after another and deactivate each one by using OK The amp symbol is removed Data capture After these settings or after each time the set is switched off using the mains switch the data mu
25. you receive a digital station the system displays the signal quality C N via a bar numeric value and the signal strength via Level The antennas direction or position is best when the largest values possible are displayed long bar for the signal quality and signal strength 7 Direct the antenna so that the largest numerical value bar size is reached 8 If no signal is found in the channel set you can start the frequency search run by pressing the blue coloured key within the band selected 9 Check the other channels one after another on which digital stations are broad cast terrestrially in your area For the weakest station direct the antenna so that the maximum numerical value bar size is achieved 10 After you position or direct the antenna we recommend to search for all the Stations using the Search wizard TV menu Settings Stations Search wizard GB 14 Daily operation Switching on off Your TV is equipped with an eco standby power supply unit On standby the power consumption drops to low power If you want to save even more electricity switch the set off with the mains switch However please bear in mind that EPG data electronic programme guide will be lost and programmed timer recordings will not be performed by the TV Switching off If the TV set is switched on you can switch it to standby using the On Off button on the remote control or by using the indicator field on the set The re
26. 14 00 15 00 16 00 17 0 06 00 06 25 Na i Extra a espafiol 5 Stations Val yyy 5 7 06 00 06 30 BR Goal Speak English Play Football 06 00 06 30 WDR Lokalzeit S dwestfalen 06 00 07 10 SuperRTL Infomercials 13 20 14 15 Kabel 1 BIERWEIIGJE 13 30 14 15 H3 ARD Buffet 06 00 07 10 Kinderkan Reif f r die Dodo Insel 25 13 55 14 20 Kinderkan Blaub r amp Bl d 37 14 00 14 20 9LIVE Reisetraum 14 00 14 15 ZDF heute in Deutschland Comedyserie Kandidaten mit gewissen Fehlern 14 00 15 00 RTL Das Strafgericht 14 00 15 00 Sat 1 Zwei bei Kallwass op 14 00 15 00 Pro7 Das Gest ndnis Heute s ch t list 14 00 14 30 N3 DAS ab 2 ee ange to Rrpgram me NSi 14 00 14 20 WDR Die kleinen Strolche eer Use w a to select the menu line for the date time stations or topics Use 4 gt em Detail View een to select within the menu line p Page W select time EE Select date topics BEI If for example you are looking for the next news select today s date Soon Oo under Time All under Stations and News under Topics The programme guide menu is divided into two areas at the top you can make the Then you get a list of all news programmes in the programme list below settings for the programme list date topics on the bottom the programme list is displayed Use the blue coloured key to switch between the two areas to make anne alerts Leer Fri 10 09 14 14 i ate Fri 10 09 0000 your selections Time
27. 240V ANT SAT 50 60Hz 29240 50 60Hz w AS W ANT TV ANT SAT B E Xelos A 26 Xelos A32 37 Modus L32 37 Xelos A42 Modus L42 First installation If the reception conditions are good then a room antenna may be used for DVB T Using the conditional access module Passive and active room antennas are available on the market The power is sup plied for an active antenna via the antenna connection For automatic programming IN order to be able to receive encrypted digital stations a Conditional Access or in TV Menu Connections Antenna DVB Antenna DVB T the distribution module CA module and a Smart Card if necessary must be inserted into the corresponding slot of your TV set You can find the Common Interface slot Cl Slot voltage 5 volts is to be set correspondingly i me on the back of your TV set see the illustration on pages 5 7 It may be practical to use a nondirectional antenna If the location is outside the normal transmitting range then a unidirectional antenna may also be used to 1 Make sure the TV set is switched off with the mains switch on the set improve the reception quality 2 First push the smart card into the CA module as far as it will go Insert it so You can find out more on the digital stations that can be received in your area at that the side with the your specialist dealer gold
28. 65493B00 Only in connection with VESA adapters see acces sories on page 44 Wall holder WM61 for Xelos A 42 and Modus L 42 Loewe order no 64495L00 As unit mounted on a rack for Xelos A 32 37 and Modus L 32 37 e Xelos Rack Loewe order no 64496 A00 e Or Flat TV F Stand 3 Loewe order no 64498A00 As a rotating free standing unit mounted on a rack for Xelos A42 and Modus L42 e Xelos 42 Rack Loewe order no 64496A01 Note on the LCD screen The TV set with an LCD screen you have purchased meets the highest quality requirements and has been tested for pixel errors Despite the utmost caution in production of the displays it cannot be totally ruled out that some of the pixels might be defective for technological reasons Please understand that such effects cannot be considered a unit defect as defined by the warranty as long as they are within the limits specified by the standard Welcome Note on the plasma screen Xelos A 42 and Modus L 42 IMPORTANT PLASMA SCREEN TECHNOLOGY IS NOT SUITABLE FOR THE DISPLAY OF FIXED IMAGES FOR EXTENDED PERIODS OF TIME A fixed image displayed for an extended period can cause permanent image retention to appear on your Plasma screen Examples of fixed images include logos video games computer images teletext interactive applications and images displayed in 4 3 mode etc If using such applications it is advised to reduce the Contrast setting to minimise the risk of image retention
29. A combinati on of the two devices forms a system which offers many advantages Loewe audio system Auro and the active speaker system Individual Sound The interplay of a Loewe TV with a Loewe audio system and a Loewe speaker system creates an excellently coordinated home cinema system Advantages are high operating comfort attractive design and adapted technology Subject to delivery options Accessories Retrofitting options The following table shows the equipment and retrofitting options for the individual device versions Device version Equipment Item no version PIP Tuner Digital Digital E gle SAT tuner m SAT tuner H a ee a o Beer Lk 66415x27 MHEG 5 Xelos A 26 DVBT CI 66416x27 MHEG 5 Xelos A 32 DR DVB T C CI En Xelos A 32 DVB T CI 66418x27 MHEG 5 ee Xelos A 32 DR DVB T CI a a Xelos A 37 DVB T C CI SES NEE E BE XelosA37DR DvBTICCL Jong Ir LL Xelos A 37 DVB T CI 66419x27 MHEG 5 Xelos A 37 DR DVB T CI 66419x28 MHEG 5 J o oo S o O Xelos A 42 DVB T C CI C a a XelosA42DR DvBTICCL Joo Ill o Xelos A 42 DVBT CI 66421x27 MHEG 5 o OJo o ooo Xelos A 42 DR DVBT CI 66421x28 MHEG eo e already integrated o can be retrofitted cannot be retrofitted You can retrofit either a PIP tuner or a digital satellite tuner 2 The integrated PIP tuner is exchanged for the Twin Sat tuner 45 Service addresses CAD Loewe Austria GmbH Parkring 10 1010 Wien Osterreich Tel
30. Operating Instructions TV m Xelos A 42 m Xelos A 37 m Xelos A 32 m Xelos A 26 m Modus L 42 m Modus L 37 m Modus L 32 Neu fur 5 Auflage Seite 3 Abbildung ge ndert Seite 39 Abbildungen ge ndert LOEWE Seite 42 Kontrastverh ltnis 1200 1 bei 37 Contents Remote control TV functions Control unit Connections to rear panel Welcome Integrated features Scope of delivery Transporting Installation options Notes on the screen Cleaning Disposal For your safety First installation Remote control Connection Use of the binders for Xelos A 42 and Modus L 42 Using the conditional access module Switching on Automatic programming Directing DVB T antenna Daily operation Switching on oft Changing stations Basics about the menu operation For the info system For the index Setting the sound Picture settings Direct control on TV set Operating modes TV How the coloured keys work for the TV mode Show status display Calling the index Calling additional functions Calling timer overview Selecting picture format Moving picture up down TV menu DVB subtitles CA module Installing new DVB software Image W ee 14 14 19 14 d 16 17 18 19 19 19 20 31 20 24 20 20 20 21 21 21 21 NK 22 gt 23 24 Picture in picture PIP PIP picture as freeze picture Selecting the station of the PIP picture Selecting the station of the TV picture PIP scan in the PIP picture Interchanging PI
31. P picture TV picture Functions in the PIP menu Switch to small PIP EPG Programme guide Using the EPG EPG menu Provider programme selection Data capture Teletext Page selection Displaying teletext pages Programme timer recordings Teletext menu Digital teletext only UK Radio Operating additional equipment Login and connect equipment Video playback Timer recording with video or DVD recorder Assignment of digital audio inputs and outputs Connecting Loewe DVD Preceiver Auro 2216 PS and Individual Sound loudspeaker system Connecting other audio amplifiers or active speakers HDMI DVI connection VGA XGA connection Component video connection Operate Loewe DVD player and recorder with the remote control What to do if Technical data Accessories Service addresses V DIC DOLBY Dolby and the double D symbol are SURROUND trademarks of Dolby Laboratories 73 26 25 25 25 25 2 26 26 2128 2 28 28 28 29 30 29 29 30 30 30 31 32 39 92 33 33 34 35 36 37 37 38 39 40 41 42 43 44 45 46 Remote control TV functions Sound off on LED indicator for current operating mode Switch over to the TV mode Switch over to operate Recorder Call timer list Set picture format Menu Other functions on off Electronic Programme Guide EPG on off Teletext on off Show hide menu V N Volume down up PIP Position of the PIP picture MENU select set Green button Stand
32. You can have your TV set retrofitted with the digital satellite tuner By using this tuner you can receive DVB S stations The digital satellite tuner is completely integrated in the TV set physically and logically and is operated by the remote control menu control of the TV When you retrofit your TV set with the digital satellite tuner your TV set automati cally has the PIP function You can retrofit either this digital satellite tuner or a PIP tuner You can find the retrofitting options for your set in the table on the next page Loewe order no 89361056 DVB S Twin sat tuner If your TV set is equipped with the digital recorder you can have it retrofitted with an integrated DVB S twin sat tuner The integrated PIP DVB T C tuner is exchanged for the DVB S twin sat tuner You can find the retrofitting options for your set in the table on the next page Loewe order no 89443080 D 44 VESA adapter The VESA adapter offers you the possibility of also using your TV set for other VESA compatible fastening devices Loewe order no 89725B00 VESA LCD Xelos A 26 Xelos A 32 Xelos A37 Modus L 32 Modus L 37 Note Please only use the original Loewe VESA adapter for your TV set and use the VESA compatible fastening devices recommended by Loewe see pages 8 Loewe DVD players and recorders The DVD players and recorders from Loewe are characterised by form and colour which match Loewe TV sets adapted user guidance and technology
33. ally or manually not with DVB T mode in UK delete stations from the list rearrange them or change names and set the switching off and alarm functions EPG Programme guide For the DVB radio stations you can also use the programme guide if the station currently active supplies data EPG Call Programme guide 31 Operating additional equipment Login and connect equipment You have logged in and connected all connected equipment in the initial instal lation If you want to connect other equipment or disconnect equipment call the connection wizard Call up the TV menu O Select Connections a Select the submenu line A V CO Select New devices modifications and Ke Call using OK 3 State what equipment you want to connect State whether a piece of audio equip ment is to be connected more details as of page 35 The connection wizard then shows you which sockets you should connect this equipment to Then connect the equipment to these sockets according to the connection diagram Connecting video DVD recorders In addition to the connection via the Euro AV sockets you also have to connect the antenna only for terrestrial antenna or cable systems through the VCR DVD recorder to the TV set The antenna signal is then available to the video DVD recorder and the TV set Note Use Euro AV cables with right angled plugs as shown u p AVI ANT TV Bes z
34. anel This can lead to short circuits and possibly to fire If something should get into the inside of the TV set pull out the plug immediately and notify customer service Never remove the back of the TV set yourself Repair and servicing of your TV set should only be carried out by authorised TV technicians Place the TV set on a level firm base The set should not protrude at the front when installing in cabinets or shelves Only use original accessories if possible e g Loewe wall holders and stands Never let children handle the TV unattended Do not allow children to play in the immediate vicinity of the TV they could knock shift or pull it over and injure someone Never leave the TV on unsupervised Do not install the TV where there may be vibrations Vibrations can lead to material stress Pull out the power and antenna cables during thunderstorms Surge voltages caused by lightning strikes can damage the TV through the antenna system and the mains Also remove the antenna and mains plugs in long periods of absence The mains plug of the TV set must be easily accessible so that the set can be disconnected at any time Lay the mains cable in such a way that it will not be damaged The power ca ble may not be kinked or laid over sharp edges not stood on and not exposed to chemicals the latter also applies to the device as a whole A mains cable with damaged insulation can lead to electric shocks and is a fire risk When removing
35. ard settings for picture sound Red button Freeze picture on off Select station down in the Wizard back Direct recording mW when equipped with Digital Recorder these buttons have different functions see operating instructions of the Digital Recorder 2 Radio only for DVB reception if broadcast by the station TEXT MENU END INFO Switch on off on stand by Switch over to the RADIO mode VH Switch over to operate DVD Player Sound menu on off Select station directly MENU enter numbers or letters _ I DVD AV CARD L era assist PIP 7 PIP on off picture in picture Call AV selection DISC M Open index MENU info texts on off Status display on off MENU hide menu NM Select station up down Station list on MENU confirm call Yellow button previous station Blue button programme info on off C SET SV ZOOM MARKER l Bu gt Select station up a Freeze picture off CoO eme WE Freeze picture on 1 Freeze picture on off with DVB T stations in GB different function The coloured keys do not work as described with DVB T stations in GB but they operate as described on page 30 Digital Teletext Control unit Display red standby green operation orange operation without screen display radio mode EPG data cap
36. ations now change automatically Stop scanning the stations by using the blue coloured key The bar frame turns green again Interchanging PIP picture TV picture The bar frame has to be green If not press the green co loured key Interchange the pictures by using the yellow coloured key 25 2215 21 00 21 45 d WT Mel a E D B z fi d a Der Wilde Westen Eifellandschaften Ga Em 1 ARD u 41 ZDF S Operating modes PIP Functions in the PIP menu In the PIP menu you can set the PIP type small picture or split screen and the position of the small picture Call the PIP menu PIP must be active green bar frame DS Le all PIP Split screen Setting the PIP type You can have the PIP picture displayed as a small PIP or split screen Switch to small PIP Select Type and then Small PIP For the small PIP you will see a coloured frame around the PIP picture Type 000 Small PIP lt Split screen Position Si the PIP picture Move the PIP picture with the arrow keys to a corner of the TV picture In this case the frame around the PIP picture has to be green and there should not be any other displays visible on the Screen Switch to split screen You can have the PIP picture displayed on the right hand side of the screen Both pictures share the screen in two equal halves You will see a coloured vertical bar between the pictures Call
37. ayed automatically when a new programme begins with Standard steel options different to the previous one ok Activate Notes e Inthe sound mode Mono means that you have switched manually from stereo to mono for example Blue call programme info e The selection menus are only available as long as the status display is display 1 ARD Eifelland 14 30 15 15 ed You can call them again at any time by pressing the END button on your remote control Yellow call last station viewed You can switch back and forth quickly between two stations using this button Calling the index Calling the index You can select your language for operating the TV set Language DRM Digital Refresh Mode Integrated features Repeat initial installation F Access code Active window PIP Automatic channel programming ACP ok Activate lt gt Previous next letter ia Select letter bt Page NV In the line above you can see the name of the station and the sound mode You can find more information on the index on page 18 Displayed below are additional options Time Sound mode Alarm time and Sleep timer that can be selected in the TV menu Settings Miscellaneous On screen displays 20 Operating modes TV Calling additional functions Select additional functions such as Image Teletext subtitles Personal teletext pages Headphone volume Scan stations and
38. cinch cables Specify under Type of amplifier whether the analogue amplifier is a stereo or surround amplifier If it is a surround amplifier also specify whether or not the TV speakers are to be used as centre loudspeakers Connect the centre output of the amplifier to the centre output of the TV using a cinch cable if necessary Note do not use the centre loudspeaker connection on the amplifier instead use the pre amplifier centre output If you want to listen to the sound via the TV loudspeakers temporarily call the Sound menu using the 11 button select Sound via and then TV When connecting active speakers select Active speakers in the connection wizard under Audio equipment selection The sound for the active speakers is transmitted via the AUDIO OUT L R connections to the active speakers Make connections to the active speakers using the cinch cables Make the audio settings on the TV set when active speakers are connected When using an external audio amplifier make the audio settings on the audio amplifier Operating additional equipment HDMI DVI connection HD The HDMI connection High Definition Multimedia Interface allows digital picture and sound transmission via a connecting cable e g from Loewe DVD Recorder Centros 2102 2172 HD The digital picture and sound data are transmitted without data compression and therefore lose none of their quality In th
39. ck at the current station location You can use the antenna connection between the VCR and the TV without a Euro AV socket The sound is only transmitted in mono Select the first menu item e g VIDEO in the AV selection Calling AV inputs in the AV selection Call AV selection Select AV device socket or VIDEO if the video recorder has been connected only via the antenna socket and use to call Now you will see the playback from the connected AV device Calling AV input via the station list Call the station list with the OK button in TV mode In the numeric and alphabetical sorting you will always find the AV sockets at the top of the list Timer recording with video or DVD recorder You can programme timer recordings on the TV set Programming can be done with the EPG programme guide not with DVB T in UK teletext or manually Call the Timer list menu with the button and press the red coloured key for the Recording wizard Select whether you want to programme the recording via EPG teletext or manually You also have the option to programme recordings directly from the EPG programme guide or teletext Note Copy protected programmes are not output to the Euro AV sockets for legal reasons When you have connected the Euro AV socket to a recorder which has Digital Link Plus or a comparable system from a different manufacturer the timer data of analogue terrestrial stations are t
40. corder REC 5 seconds Return to using the remote for the TV Press TV button Press the DVD button the display above will light up for approx 5 seconds Press the REC button the display above will light up for approx Functions for the Loewe DVD player Auro 2216 PS 8116 DT Sleep timer DISC select chapter title RADIO select stored station MENU enter digits DISC Repeat RADIO display RDS name frequency of station DISC User interface of loaded DVD t 2 Show hide menu MENU close window V V Volume down up DISC chapter up down MENU select Bon DISC search hacktforwart MENU select left right Green button Title Chapter selection Red button DISC camera position Playback DISC short beginning of chapter title previous chapter long search back RADIO short fine tuning back long search back no function Z DVD WM ope D amp J A P Dee DISC M Tt ol 4y C SET SV ZOOM MARKER SF Go os Ce B ms ROL Sa Switch on off on stand by short TV Radio Digital long Auro FM AM Radio Switch over to operate Auro Select sound format Set TV picture format RADIO Mono Stereo DISC Repeat A B RADIO FM AM mode Select external audio source DISC menu bar Lg MENU context help DISC Status El RADIO station tab MENU hide menu DISC next previous chapter RADIO
41. d using 4 gt and make your selection The colour standard for a connected PC is RGB In Set Top Boxes you usually set Ycc as a colour standard Other formats such as Ypp or RGB can also be output Please consult the operating instructions of the device connected If the wrong standard is selected you will recognise this by the wrong colours in the display Operating additional equipment Sound from PC or Set Top Box Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN L R on the TV via a cinch cable The sound is reproduced via the TV speakers If you have connected a digital external audio amplifier you can select the digital audio signal in the connection wizard TV menu Connections New devices mo difications and assign it to the VGA XGA socket You can make the other settings for the audio amplifier as described for digital amplifiers on page 36 The digital audio signal of the Set Top Box is fed in at the AUDIO DIGITAL IN socket on the TV Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the amplifier 38 Component video connection HD If you have a DVD player recorder with Component OUT connec tions you can connect it to the SD HD COMPONENT IN sockets of the TV instead of to the Euro AV sockets The connecting cable with three cinch plugs each transmits picture information The playback is of a better quality than via the Euro AV socket You need another cinch cable for the
42. d lamp on the TV set lights up If the lamp is orange a timer recording is being made EPG data is being captured or radio operation without screen display is active Switching on the TV set From standby it is best to switch the set back on using the On Off button or by using the numeric buttons of the remote control 0 99 Or use the switch integrated in the indicator on the set The green indicator on the TV set lights up Or switch on the TV set with OK you can then see the station list and select a station Switching on the radio With the RADIO button on the remote control or with R on the control ring of the TV set you can switch on the radio If you switch off the TV set using the mains switch on the set the indicator no longer lights up If the TV set is switched off via the mains switch then you have to first switch it into standby mode via the mains switch and then switch it on with the remote control or by using the indicator window on the set Daily operation Changing stations With the P P buttons on the remote control Stations up down When changing the station display is visible for a few seconds 41 ZDF AAEM RAE 21 00 21 45 If additional languages are broadcast with DVB stations then the set displays the language sound selection under the station display Call the language sound selection by using the green coloured key and select using a e With the numeric b
43. e equipment connected no analogue digital conversion is necessary which might also have lead to losses in quality DVI signals can be also be reproduced by the HDMI connection using a DVI HDMI adapter cable This is possible because HDMI is based on DVI and is downwardly compatible That means that the digital video signals are transmitted via HDMI no audio signals are transmitted though In addition both use the same copy protection method HDCP Connect the set with an HDMI connection using an HDMI cable type A 19 pin to the HDMI socket of the TV set Log in the HDMI connection in the connection wizard TV menu Connections New devices modifications Select the HDMI connection in the AV selection Call AV selection AV selection VGA HDMI DVI OEN RVA DDAA EN Select HDMI DVI socket and use to call Start playback on the device connected with HDMI connection The set automatically recognises and sets the best possible format for the video If transmission occurs via a DVI HDMI adapter cable then you can feed in the appropriate analogue audio via the audio input sockets AUDIO IN L R on the TV set The sound is reproduced via the TV speakers If you have connected a digital external audio amplifier you can select the digital audio signal in the connection wizard TV menu Connections New devices mo difications and assign it to the HDMI DVI socket You can make the other settings for the audio amplifier as de
44. e menu again using the END button RB W N Plug the antenna plug back in If you now get interference because a TV station is transmitting on the same channel as the VCR station you have to change the transmitting station on the VCR and search for the VCR station on the TV again Operating additional equipment Video playback There are several ways to see the picture and hear the sound ofthe VCR DVD player recorder or camcorder on your TV ik 2 You can usually use the Euro AV sockets on the TV set and on the VCR For camcorders or digital cameras use the AVS sockets on the right of the TV set DVD players recorders and SetTopBoxes may have HDMI or component sockets for video and audio transmission In this case use the corresponding sockets on the TV set When playing back from a video recorder using Euro AV socket and Digital Link Plus or a comparable system from another manufacturer the picture from the VCR is shown at the current channel location When playing back from another VCR camcorder or digital camera use the AV selection or the station list OK to select the AV socket the device to which the VCR is connected Video recorders transmit a switching voltage during playback which the TV can evaluate can be activated in the connection wizard or in the TV menu Connections Miscellaneous Allow switching voltage set to yes Then the picture of the video recorder is shown during playba
45. ease consult the tion The centre signal can be reproduced alternatively by the TV speakers Preceiver manual Connect the cubic socket on the DVD Preceiver to the Master cubic socket on If you want to listen to the sound via the TV speakers temporarily call the Sound the subwoofer Use the cubic plug cable enclosed with the DVD Preceiver Plug the menu select Sound via and then TV If you want to listen to the sound via the white plug without kink protection into the cubic socket on the subwoofer For Loewe Auro system select AURO under Sound via TV as a centre loudspeaker connect AUDIO IN C on the TV set to PRE OUT Con the DVD Preceiver using a cinch cable Connect the digital audio output of the TV Loewe Flat TV OTO SE P Loewe Individual Sound DIGITAL OUT SERVICE Power OUT conf emer Center to Line IN TV Right Subw Left 2 co Slave O OJOO cont Right Center Left Systemconnector QO O SE AUX1 IN COMPONENT VIDEO OUT ill FLE Eam di SR Operating additional equipment Connecting other audio amplifiers or active speakers In the connection wizard select HiFi AV amplifier under Equipment selection audio component The connection wizard allows configuration of different audio amplifiers stereo amplifiers surround amplifiers analogue or digital with different sound formats Dolby Digital dts MPEG and Stereo PCM
46. en contact chip faces the side of the module If a set was retrofitted with a PIP tuner or if this is already integrated in a set with a printed with the supplier s CA module digital recorder then plug the antenna into the antenna input of the PIP tuner and brand logo Printed arrows P Provider s brand logo connect the PIP tuner output with the ANT TV socket Tuner 1 See illustrations on indicate how to insert the page 6 7 card Also follow the instal Smart Card Set specific equipment and retrofitting options for PIP and satellite tuners see lation instructions included pages 44 and 45 with the smart card 3 Slide the CA module carefully into the slot with the IM If a Digital Satellite Tuner 1 has been retrofitted connect your satellite antenna contact side facing the front When you are standing system to the ANT SAT socket in front of the TV set the logo on the CA module Eject button Jam must face the rear If a Digital Satellite Tuner 2 has been retrofitted connect one antenna cable each Make sure the module is not twisted in the process for example from the antenna switch or from the twin LNC to both SAT sockets Do not use force When the module locks the eject button is pressed When laying the cable use the cable clips affixed beneath the TV set outwards Replace the connection cover on the TV set The CA module and the smart card are not included in the scope of delivery for this set you can usually obtain the
47. enu offers other options for recording connections and settings of the TV set For a recorder that is logged in you can find the following menus in the Recording Recording wizard to programme new timer recordings e Via EPG Via teletext VPT Manually You will find further information about timer recording on page 33 Timer list Here you will find a list of programmes programmed for recording You can change the recording data or delete programmed recordings and programme new recordings Pre record time and Post record time For recordings without VPS PDC set a lead and lag time here so that the pro gramme is fully recorded despite any slight differences in the time Under Connections you will find the following functions New devices modifications connection wizard The connection wizard helps you connect and log in additional equipment such as video recorders DVD players recorders camcorders digital cameras pay TV decoders equipment with component signals and digital HDMI DVI signals Antenna DVB e Antenna DVB T Antenna DVB S You can find more information on pages 13 and 14 Digital Link Plus Transmission of the station data from the TV set to the video DVD recorder if a recorder with Digital Link Plus is connected Miscellaneous connections Set AV norm for the connections manually if it is not recognised automatical ly e Assign audio digital signals to one of the AV sockets e
48. er Audio input analogue or satellite antenna Satellite antenna Audio input left right analogue Sat tuner 1 Sat tuner 2 Audio output left right analogue 00 O 00 00 oe 0000 ei a Antenna cable Euro AV Euro AV Component Socket E analogue digital socket 1 socket 2 video inputs power Cable tuner 1 Co Pb Cr Pr Y Service socket Antenna output PIP tuner VGA XGA Input connect to tuner 1 HDMI DVI input Digital audio output Digital audio input Set specific equipment and retrofitting options for PIP and satellite tuners see pages 44 and 45 GB 6 Connections to rear panel Xelos A 42 and Modus L 42 Audio input left Common interface nr CI Slot Audio input right III Video input AVS III 11111 1111 S VHS input AVS E ul AA Headphone connection Mains switch Power cable nalogue Antenna cable PIF analogue r i a or sate ght analogue Sa Antenna cable Euro AV Euro AV ee analogue digital socket 1 socket 2 VGA XGA input tuner 1 HDMI DVI input Antenna output PIP tuner connect to tuner 1 Digital audio output or satellite antenna ar _ Digital audio input Sat tuner 2 Component video inputs Cb Pb Cr Pr Y Set specific equipment and retrofitting options for PIP and satellite tuners see pages 44 and 45 7 Welcome Thank you At Loewe we combine the highest standards of technology design and user friendliness Thi
49. ereo on the TV set in the status display END Connect Digital Out from the TV set to a Digital In of the external digital audio amplifier and select the appropriate input to this Technical data General data MHEG 2 versions DVB T Cl 66446x27 66415x27 66414x27 Set dimensions without stand ca cm WxHxD 84 4x59 1x9 5 107 0x74 2x11 5 Dimensions with stand ca cm WxHxD 84 4x62 7x26 0 99 1x70 2x25 8 107 0x76 5x29 0 Set weight without stand ca kg 19 0 20 4 36 5 Set weight with stand ca ka 21 0 224 39 5 Display HD LCD technology HD LCD technology HD Plasma technology Picture diagonal cm picture format 80 16 9 94 16 9 106 16 9 Resolution 1366x768 1366x768 1024x1024 Contrast ratio 1200 1 800 1 3000 1 Luminance 500 cd m 500 cd m 1400 cd m2 Angle of viewing horizontally verticall Power consumption IEC 62087 in operation watt 85 100 100 115 300 315 in standby watt lt 3 lt 3 lt 3 Ambient temperature Celsius Relative humidity not condensing 20 80 Barometric pressure 800 1114 hPa 0 2000 m above sea level Xelos A 26 Xelos A 32 Xelos A 37 Xelos A 42 Order no versions DVB T C CI 66416x87 66418x87 66419x87 66421x87 Versions DR DVB T C Cl 66418x47 66419x47 66421x47 MHEG 5 versions DVB T CI 66416x27 66418x27 66419x27 66421x27 MHEG 5 versions DR DVB T CI 66418x28 66419x28 66421x28 Set dimensions without stand ca cm WxHxD 68 4x50 7x10 8 Dimensions with stand ca cm WxHxD 68 4x56 1x24
50. es for sorts and saves all the TV stations that can be received according to your settings and the antennas connected 14 When the TV stations are saved you will receive a corresponding message 15 Press the OK button and the set then searches for the radio stations 16 The TV set searches for saves and sorts all radio stations which can be received with your antenna system Then log on your video equipment decoder and audio system using the connec tion wizard and connect these to the TV according to the connection diagram displayed If you want to connect other equipment later you can find information as of page 32 You can repeat the initial installation at any time e g after moving house Call the index using the INFO button in the TV mode if no menu is opened Select the index item Repeat initial installation you will find this listed separately before the letter A Press OK to start the initial installation Note For DVB T stations in UK the stations are tied to Logical Channel Numbers LCN and sorted from 1 799 Digital station without LCN are stored from 800 onwards Analogue stations are stored from1001 Station sorting Note not with DVB T stations in UK You can change the station sorting that was carried out automatically later at any time see TV menu Settings Stations Change stations 1 Nl First installation Directing DVB T antenna Note not with DVB T s
51. f you only receive one satellite 8 In the following menu specify whether the station search should take place in the high and low band Yes or only in the low band No Note For most satellites a station search is required in both bands 9 For the low band and high band the standard frequencies 9750 MHz 9 75 GHz and 10600 MHz 10 6 GHz are preset If your satellite antenna is equipped with an LNC LNB with a divergent oscillator frequency specify the corresponding frequency for low and high band respective ly Note The correct display of the received frequencies in the TV menu Settings Channels Manual adjustment depends upon this setting 10 You should receive a picture with sound with the settings previously made only for ASTRA 1 and HOTBIRD Then press OK 11 In the Pre programming menu select the factory set pre programming to programme the satellite stations quickly To ensure all stations that can be currently received are searched for and saved select No at this point Symbol rates The standard symbol rates 22000 and 27500 are preset If you would like to receive stations with different symbol rates specify the correspon ding values here using the numeric buttons on your remote control 12 Press OK to obtain an overview of the settings with which the automatic pro gramming is to take place 13 Press the OK button again and the station search will start The TV set search
52. fill the screen such as 4 3 for a longer period of time Once an image is burnt into the display it is usually not possible to remedy the problem this situation is neither covered by the warranty nor by the guarantee To avoid or reduce image burns on your screen please follow these instructions and recommendations e During the first 100 hours of operation you should display moving pictures for the most part or freeze pictures that change frequently these images are to fill the entire screen e Use your screen in a full screen format 16 9 e If you use the screen as a PC monitor always activate the screen saver e Switch the TV set off when it is not being used e Reduce the contrast and brightness as much as possible The DRM function Digital Refresh Mode which can be called in this set may be able to eliminate or reduce minor visible effects Call up the Index using the INFO button on the remote control select DRM Digital Refresh Mode and start the Refresh mode by pressing the OK button Al ternating full screen colour images will be displayed now instead of the TV picture Run the Refresh mode for about as long as a freeze picture was displayed earlier End the Refresh mode by pressing any button on the remote control Any effects resulting from an excessively long display of a freeze frame cannot be reversed using the DRM function Cleaning Use only a soft clean damp cloth to clean the TV
53. for each station Thus the corresponding colour key or the TEXT button is In initial installation and daily operation the TV set is in TV mode This is also the displayed case when none of the other modes of operation such as EPG Teletext PIP or Radio have been selected Each of these operating modes has a separate menu with separate functions for the coloured keys Call the menu via the MENU button Green language sound selection Yellow time selection Red channel selection for multi channel providers How the coloured keys work in TV mode Note The coloured keys do not work as described below with DVB T stations in UK but they operate as described on page 31 Digital Teletext DVB subtitles Red the TV picture freezes Pressing this button again starts the picture moving again If your TV set is already equipped with a digital recorder the DR archive is called Blue protection of minors If you press one of the coloured keys during the status display or you press the TEXT button the related selection menu is displayed The status display subtitles refer only to the DVB subtitles and are not provi Green Call personal settings factory settings for picture and ded by all stations The options you see depend on the particular station many sound save picture and sound settings as personal settings stations broadcast subtitles via teletext a The status display is displ
54. ications and select the corresponding decoder Station Follow the instructions in the connection wizard again and select the right audio source decoder TV or autom see instructions of the decoder Set your menu language Press the INFO button in TV mode index Select the first index item and call it by using OK Then select the language and confirm with OK What to do if Digital Link Plus does not function Various characters are displayed incorrectly in the teletext No sound via external digital audio amplifier Euro AV cable is not fully wired pin 10 not wired Some recorders can only adopt stations during the initial installation of the TV set All or some of the terrestrial and cable stations are stored on station storage locations gt 99 The wrong character set is set in the teletext menu The external digital audio amplifier does not support the selected sound format Dolby Digital dts MPEG TV set and external digital audio amplifier are not connected Replace the Euro AV cable Restore the recorder to the as delivered state see recorder s operating instructions Rearrange the terrestrial and cable stations so that they lie between 1 and 99 Set the right character set Teletext menu Settings Character set standard or the appropriate character Set PCM stereo on the DVD player in the sound selection For DVB stations switch language sound selection green coloured key to St
55. ich the programme to be recor ded is listed if necessary Select the programme you want to record by with e a and confirm with the OK button For Timer data select the VCR or DVD recorder and whether you want to record once or a series of times Confirm with OK Teletext menu Display teletext menu 100 100 ARD Text 10 09 04 14 14 42 ARD TEXT Index Teletext im Ersten Bulmahn Bildung statt Eigenheim Wird auch der Nahverkehr teurer Australien Keine Zugestandnisse Tote bei Zugungl ck in Schweden Tennis Haas unterliegt Hewitt Formel 1 Schumacher erneut vorne Tagesschau 110 112 Kultur INFO END Here you will find functions such as e Newsflash this is an on screen display of the latest messages e g page 111 e Reveal concealed information e g VPS pages in the station preview pages e Programme wizard for recording via teletext In the settings you will find menus to define the station preview pages subtitle pages and personal text pages and menus to set the character set selection as well as HiText graphics GB 30 Digital teletext operation only for MHEG 5 device versions x27 28 In the UK the teletext for DVB T stations is transmitted as per the MHEG 5 stan dard standard of the Multimedia and Hypermedia Expert Group It contains text graphics functions and links The operation of these menus depends on the particular provider Normally after a Station is
56. il loewe france wanadoo fr EIN Kjaerulff 1 OY Artturinkatu 2 20200 Turku Finland Tel 358 2 284 1600 Fax 358 2 284 1601 Email Finland kjaerulff1 com LinnSight Ltd PO Box 8465 KA 7 2YF Prestwick UK Tel 44 12 92 47 15 57 Fax 44 1292 47 15 54 Email helpline linnsight co uk SIBA Engineering S A 6 Kifisou Av 122 42 Aegaleo Hellas Tel 30 210 5913793 Fax 30 210 5317755 Email service siba gr CH Basys Magyarorszagi KFT Epitok utja 2 4 2040 Buda rs Magyar Tel 36 23 41 56 37 121 Fax 36 23 41 51 82 Email basys mail basys hu CD Loewe Italiana SRL Largo del Perlar 12 37135 Verona VR Italia Tel 39 045 82 51 619 Fax 39 045 82 51 622 Email Angelo Lorenzi loewe it CL PL Trading pz 2004 Ltd 27 Aliat Hanoar St Givataiim 53401 Israel Tel 972 3 5727155 Fax 972 3 57 27 150 Email info loewe co il CM Mirage Holdings Ltd Flamingo Complex Cannon Road Qormi Malta Tel 356 22 79 40 00 Fax 356 21 44 59 83 Email servicing mirage com mt SOMARA S A 377 Rue Mustapha H Maan 20000 Casablanca Morocco Tel 212 22 22 03 08 Fax 212 22 26 00 06 Email somara wanadoopro ma CN CableCom AS Gneisveien 12 3221 Sandefjord Norge Tel 47 33 48 33 48 Fax 47 33 44 60 44 Email soren cablecom no NZ International Dynamics NZ Pty Ltd PO Box 109 317 Newmarket Auckland New Zealand Tel 64 9 379 0179
57. ine and confirm using OK Select the Miscellaneous line and confirm using OK gt w N Select the DVB subtitles line and confirm using OK DVB subtitles Subtitles off OKRE END INFO Note If you have selected Subtitles off then the set generates an on screen display when subtitles are available By using the END button you can open the status display and you can display the subtitles again by using the TEXT button e Call the status display by pressing the END button if it is not yet displayed e When the status display is visible press the TEXT button Select the desired language and confirm using OK The presetting changes for the current programme e Which subtitle languages can be selected depends on the provider e The automatic shortlist is determined by the menu language and the selection made in the DVB subtitles settings menu e By pressing the END button you can hide the menu again Note DVB subtitles are not available when digital teletext is being displayed Operating modes TV Removing the CA module 1 Switch the TV set off with the mains switch 2 Remove the cover from the back of the set on the upper left 3 Press the eject button at the module slot the module is unlocked 4 Remove the module from the set Inserting a new CA module After you insert a new CA module Cl module is displayed in the menu and switch the TV set on the following dialogue is disp
58. key 3 For the country specific station sorting and for presettings for DVB T and DVB C enter the location at which the TV set is operated 4 Ifyou have selected DVB T you then reach the menu Antenna DVB T If you use an active antenna then select yes 5V 5 If you have selected DVB C you generally leave the symbol rates and modulati on types unchanged If other symbol rates are used in your cable network for broadcasting enter the values with the numeric buttons of the remote control If only one symbol rate is used enter the same value for both symbol rates If other modulation types are used for broadcasting in your cable network select them in the menu If only one modulation type is used select none for modulation type 2 If necessary ask your specialist dealer about the necessary settings for your cable network 6 Inthe Select satellite installation menu make the selection that corresponds to your Satellite antenna installation Note If you have any questions on how your satellite antenna installation is configured and on the antenna settings consult your antenna installer or your specialist dealer 7 Select the satellite the antenna is directed at such as ASTRA1 Initial installation Connect antenna cable s Antenna cable s for Antennaicable onaloguel DVB T to antenna socket s NV m ANT TV ANT TV ANT SAT Connect disconnect 4 Back DVB C DVB S ok Proceed I
59. layed Autom station search Your TV set has detected a new Cl module This requires a station search for all new receivable stations After you press the OK button the system starts the wizard to carry out the auto matic station search Check the proposed search parameters and let the set search for new stations Calling the CA module menu Here you can call up information on the inserted conditional access module and the smart card To do this use the MENU button to call the TV menu select the line Settings Miscellaneous and then the entry Cl module xxx in place of xxx stands the name of the provider which is output by the smart card The term Cl module displayed in the menu refers to the CA module The content of this menu depends on the particular supplier of the CA module Note This menu is only available for digital stations Installing new DVB software To ensure your DVB S receiver is always performing at the state of the art newly developed software versions are made available from time to time these are broadcast via satellite and can be automatically installed on your set only possible via ASTRA Software is recognised automatically The set can determine whether a new software version is available This occurs at night when your EPG is automatically updated For this your TV set has to remain in the standby mode do not switch off
60. low motion back Record ms REC MENU O TITLE O T Gi GI Ai GI amp di O W AV DVD AV CARD assist ai DI A Genee SSES R En WW C SET SV ZOOM MARKER NN C SD gt Ce B cc py Switch over to operate DVD Player TV Sound menu STOP Title list PLAY Edit thumbnail CARD Photo Music Film Mode ViewVision DR Timeshift Mode ViewVision DR STOP Call AV selection Card Reader operation ViewVision DR Home menu PIP ae in picture de menu bar MENU hide menu P P PLAY Next chapter STOP Select station up down ege Status display TV DVD MENU confirm the menu selection Yellow button Zoom Blue button DISC Short Set marker long Marker search PLAY Press short next chapter PLAY Press long search forward PAUSE Press short slow motion forward Stop Pause single frame 39 GB What to do if The Recording menu point is not displayed in the TV menu Connections cannot be called in the TV menu deactivated The control of the Loewe video recorder and the timer do not work or do not work properly General problems with connecting external equip ment via an AV input A decoder connection does not function or is faulty All menus appear in the wrong language GB 40 No video or DVD recorder logged in A time recording is in progres
61. m at your specialist dealer Use of the binders for Xelos A42 and Modus L 42 Ina DIE oom a T TET pi mim i DI TTET 1 T EI a _ together and fastening them to the rear panel Switching on The binders can be opened again by Press the mains switch The indicator lamp on the set now turns pressing on the binder latch red standby mode Switch on the set using the switch integrated in the indicator The indicator on the TV set lights up and turns green indicator lamp 12 First installation Automatic programming Automatic programming of the TV set is started the first time you switch it on Follow the menus Con gt Settings can be selected by pressing one of the directions and confirm your settings by pressing OK You then go to the CS next menu lt lt Back to the previous menu 1 First you have to select the menu language 2 By pressing the OK button you can call the menu Connect antenna cable s If you want to receive digital stations via satellite then choose DVB S confirm using the yellow coloured key If you also want to receive digital terrestrial stations DVB T then select DVB T Also select Antenna cable analo gue this way the standard analo gue stations can also be searched for and saved If you can receive digital stations from the cable network then select DVB C using the yellow coloured
62. nk Plus are used for the timer recording the advan tages of Digital Link for concealed installation of the recorder Operating additional equipment Assignment of digital audio inputs and outputs Audio input AUDIO DIGITAL IN The TV set has a coaxial digital audio input AUDIO DIGITAL IN and a coaxial digital audio output AUDIO DIGITAL OUT If you are using an external digital surround amplifier for sound reproduction you have to feed digital audio signals to the TV e g from the DVD player AUDIO DIGITAL IN OUT I Te TU Il N mu CO T Ze on or beat Da Im eeng D ee Cl poeri VIDEO OUT 5 j i u right aa mem jr 1 m wo k Kal Gi D ulm su SSES m Connect the output socket of the DVD player DIG OUT to the TV s AUDIO DIGI TAL IN socket with a cinch cable In the connection wizard specify that audio transmission is to be digital Specify that the digital sound is to be assigned for example to the Euro AV socket 2 to feed the digital sound to the digital audio output of the TV set and via this to the external audio amplifier Further information about this can be found on page 36 34 Audio output AUDIO DIGITAL OUT The digital audio signal is applied at the AUDIO DIGITAL OUT socket of the TV For example you can connect an external digital audio amplifier or the Loewe Auro system here An analogue audio
63. nter the first letter using the numeric buttons on the remote control like on a mobile phone keypad or The corresponding menu Timer functions is displayed in the TV menu Set use 4 to go to the previous next letter tings You can now choose between Switch off today only and Switch off daily or and enter the time use P P to scroll up or down through the pages and use e 4 to go from line to line GB 18 Daily operation Setting the sound Volume and other frequently used sound settings Setting the volume Volume 24 mE by using 4 or OK you can call other sound settings sound The Sound effects settings allow you to expand a Dolby Pro Logic Signal to a virtual surround signal by using Dolby Virtual by using Panorama you can enhance the foundation of the stereo sound virtually for the loudspeakers Sound off on Sound off Sound on Press button again or adjust volume Other sound settings GED Gall the Sound menu Sound INFO END 4 use 4 to select the sound function to be set and use for the related selection INFO END D C and use 4 to select set o Sound settings Treble and bass Different menu items are displayed depending on the connected audio device AURO hi fi amplifier Under more you will find the sound selection for loudspeakers and headphones auto volume headphone volume AV audio signal
64. ons directly You can also find a great deal of information on technical terms about television Before the You can set your TV set to switch off to stand by mode once or every e i 8 i day at a given time alphabetical sorting you can find the menu language option the DRM mode for reducing screen burn ins only for TV sets with a plasma screen the list of features integrated into the TV set and the repeat initial installation option Call the index in the TV mode without any other on screen Switch off displays et Automatic va Manual You can select your language for operating the TV set dich Symbol rate j Teletext Activate Character set FLOF ok Activate lt gt Previous next letter a 2 Select letter si Page V V Use the OK button to call Switch off Automatic Language DRM Digital Refresh Mode d gt Integrated features Switch off today only Repeat initial installation E ee If you want your TV set to switch off once automatically to stand by mode select yes and enter the time Access code Active window PIP Automatic channel programming ACP 0k Activate 4 Previous next letter 1 Select letter vi Page N V Info on the index item selected is visible at the top of the picture If the OK symbol is displayed in the line selected you can use the OK button to access the menu directly and carry out settings or selections This is how to select the index item E
65. r ensure that it is protected against moisture rain drips splashes sprayed water or dew Do not place any containers filled with liquids or lit candles on top of the TV High levels of moisture and con centrations of dust cause leakagel currents in the equipment which can lead to danger of electric shock or fire The manufacturer s warranty is only valid for use in the specified permissible environment If you have moved the TV set out of the cold into a warm environment leave it Standing for about an hour since condensation may form This equipment must only be connected to a mains power supply which has the same voltage and frequency as that specified on the rating plate use the power cable provided Incorrect voltages can damage the equipment Like all electronic equipment your TV needs air for cooling Obstruction of the air circulation can cause fires Therefore the air vents on the back must always be kept free Please do not place newspapers or cloths on over the TV If the TV is placed in a cabinet or on a shelf lea ve at least 10 cm at the sides and 10 cm at the top to ensure sufficient air circulation Position the set so that it is not exposed to direct sunlight and additional heating from radiators Prevent any metal parts needles paper clips liquids wax or the like from get ting into the TV set through the air venting slits in the rear p
66. r set is equipped in the Integrated features index press the INFO button in the TV mode if no menu is displayed the Integrated features menu item is also displayed in the index before the initial letter A There are separate operating instructions for Digital Recorder Scope of delivery e LCD TFT TV set or plasma TV set e Table stand mounted e Mains cable for LCD TFT TV sets e Assist remote control with 2 batteries e Marketing and service card e 3 cable loops for plasma TV sets e These operating instructions Transporting Only transport the unit in an upright position Hold the set by the top and bottom edges of the housing The plasma LCD screen is made of glass and or plastic and may break if not handled carefully Should the LCD screen become damaged or should the liquid crystal begin to leak then it is imperative you wear rubber gloves when removing the set Should the liquid come in contact with your skin thoroughly rinse with water immediately Installation options As a desktop unit A table stand is already mounted on the set As a wall mounted unit Wall holder WM52 for Xelos A 26 Loewe order no 63493A00 Wall holder WM53 for Xelos A 32 37 and Modus L32 37 Loewe order no 63493A10 Screen Wall Mount 1 for Xelos A 26 32 and Modus L 32 Loewe order no 66484B00 Only in connection with VESA adapters see accessories on page 44 Screen Wall Mount 2 for Xelos A 37 and Modus L 37 Loewe order no
67. ransmitted from the TV to the recorder The recor ding quality SQ or EQ is transmitted for DVD recorders in addition to the station date and time The recording is then controlled by the recorder and the recorder tuner is used for reception of the station The recording data are not saved in the timer list of the TV set You will only find the timer data in the recorder If you want to record from digital stations the TV tuner is used and the recorder is controlled by the TV set Then the station is locked during the timer recording If you have connected a Loewe video recorder with Digital Link to the Euro AV socket without Digital Link Plus and you are using the timer programming of the TV the TV receiver is always used for terrestrial stations as well The TV controls the recording You have to set the recorder to the AV input signal source to which the TV set is connected Then the station on the TV set is locked during the timer recording Digital Link must be switched on on the recorder Read the operating instructions of your Loewe recorder for more information Use only Euro AV cables which are completely wired otherwise Digital Link Digital Link Plus will not work Another advantage of Digital Link is that you can install the recorder in a conce aled place e g in a rack You can control the recorder with the TV set If you have a Loewe recorder with both systems you can use all the advantages The advantages of Digital Li
68. s The Digital Link function is not activated or not possible in the recorder Euro AV cable is not connected Recorder is not logged in The device is not logged in to the connection wizard or is connected differently than is shown in the connection diagram The AV norm is set incorrectly The AV signal is set incorrectly The signal is not decoded because the wrong deco der stations are selected in the connection wizard The sound is missing in decoder mode because the wrong decoder sound is assigned in the connection wizard Menu language has been set incorrectly Log in the video or DVD recorder in the connection wizard and connect the device Wait until the timer recording has ended or delete the timer Activate Digital Link in the recorder see operating instructions of the video recorder Connect the Euro AV cable Log in recorder In the connection wizard TV menu Connec tions New devices modifications compare the connection diagram with the actual installation and connect as shown if necessary Set the norm correctly Set the AV signal correctly If Automatic is set for AV norm or AV signal this can lead to errors for signals which do not conform to the norm Then the norm and the signal are to be set according to the specifications in the operating instructions of the external device Follow the instructions in the connection wizard again TV menu Connections New devices mo dif
69. s applies equally for TV video and accessories Your new TV set is ideally equipped for the TV standard of the future HDTV High Definition Television With its high resolution screen and the future proof digital interfaces HDMI you have the option to view HD content with excellent picture quality It therefore carries the European quality mark HD ready Digital TV is steadily spreading via terrestrial reception in the cable network and via satellite Loewe supplies sets equipped with DVB T and DVB C DVB C not for UK A digital satellite tuner DVB S can be retrofitted The DVB integrated within the TV set is operated via the TV set menus using the remote control We have designed this TV set so that it is easy to operate by using menus Information about settings in menus is shown automatically this enables you to understand the context quickly You will find the answers to many of your technical queries in the index of your TV If you want to operate the TV you can access functions directly from the index This saves you from having to read through detailed operating instructions and is the reason why this operating manual only explains the most important operating steps Integrated features The maximum equipment is described in these operating instructions Functions indicated by are not available in all TV sets Menu contents may differ from the ones shown depending on how your TV is equipped You can display how you
70. scribed for digital amplifiers on page 36 The digital audio signal of the DVI audio source is fed in at the AUDIO DIGITAL IN socket on the TV Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the external amplifier Set geometry as described for VGA XGA connection VGA XGA connection HD You can connect a PC or a Set Top Box STB and therefore use the TV screen as an output device Connect the PC STB to the VGA XGA socket on the TV using a VGA cable When connecting to a PC first set one of the following screen resolutions on your PC 800x600 60Hz SVGA 1024x768 60Hz XGA When a Set Top Box is connected set the following screen resolutions according to the options of the Set Top Box SDTV 720x576 PAL 720x480i NTSC 720x576p 720x480p HDTV 1280x720p 1920x1080i Select tne VGA XGA connection in the AV selection Call AV selection _AV selection AVS VGA gt HDMI DVI COMP IN E VIDEO VCRI DVO Select VGA socket and use to call Start the connected device Set geometry Call the TV menu using the MENU button select Geometry using 4 and set If the picture is not positioned correctly you can move the picture horizontally and vertically here so that it fills the whole screen You can also set the phase position so that the picture appears in the best possible quality Setting colour standard Call up Image settings TV menu Image Select Colour standar
71. set the screen and remote control do not use any caustic or abrasive cleaning agents Disposal Packing and box You have chosen a long lasting technical product of very high quality We have paid a fee to authorised recyclers who will collect the packing from your dealer for disposal pursuant to domestic regulations Nevertheless we recommend you to keep the original box and packing material for optimum protection if you have to transport the set Attention The EU directive 2002 96 EC regulates the proper way to recycle handle and utilise used electronic devices Hence all used electronic devices are to be disposed of separa tely Please do not dispose of this set in the normal household rubbish You may return your used set free of charge at designated recyc ling centres or at your specialist dealer whenever you purchase a new comparable set You can find out more about recycling also for countries outside the EU from your local government 9 For your safety For your safety and to avoid unnecessary damage to your TV set please read and observe the following safety instructions 10 This TV set is designed exclusively for reception and reproduction of video and audio signals This equipment is designed for domestic and office environments and must not be used in rooms with high humidity e g bathroom sauna or high concentrations of dust e g workshops H the equipment is used in the open ai
72. soon ee BERT oes aoe Stations et All programmes currently running are listed initially in the programme list With the Topics Ram gt E e a buttons select the programme you want to watch and switch over with the OK button Brief information is shown below the programme list for some programmes If more detailed information is available you can call it using the TEXT button Use P P to scroll up or down through the pages of the programme guide In the selection lines for date and time above you will see the time change when 15 00 15 05 hr fernse hessen aktuell 15 00 15 15 ZDF heute Sport 16 00 16 05 S DWEST Baden W rttemberg Aktuell 16 00 16 15 Das Erste Tagesschau um vier scrolling when you scroll further the date also changes When the Time line is selected you can enter the time as of which the pro Change to programme list menu grammes are to be displayed use the numeric buttons on your remote control to do If you want to mark one of these news programmes return to the programme list this Always enter four digits such as 0900 for 9 a m using the blue coloured key select the desired news programme by using e a If programmes are displayed which have not yet started you can mark these with the nd mark this by using OK OK button The TV set then switches automatically to this station at the given time 27 GB Operating modes EPG In front of the programme s title the system places an
73. st first be collected before switching on the set To do this select the station you have defined as a provider and leave the TV set switched on for about one hour or switch the set to the standby mode After about two minutes in standby mode the indicator on the set turns orange The data acquisition begins and lasts about 1 hour When data acquisition is termi nated the indicator turns red again The data are also automatically captured between 2 a m and 5 a m when the TV is switched to standby A prerequisite for data capture is that Data capture is on for DVB analogue in the EPG menu Note If the TV set is switched off using the mains switch or the mains plug is pulled out all EPG data are lost If for example you cannot receive any analogue EPG providers or if you only use DVB you should set the data capture to on only for DVB Switch on TV when marked You can have the TV switched on automatically from standby at the beginning of the marked programme If you are not present at the time a safety prompt makes sure the TV switches off again after 5 minutes Operating modes Teletext Analogue Teletext Cay In Multiple pages scroll using 4 Ek You can see which multip D SH les pages can be called in the bottom menu line Teletext transmits information such as news weather sports programme previews i SE E ier ar Teletext on off 100 100 ARD Text 10 09 04 14 14 42 Call contents page 100 ARD
74. tations in UK If you use a room antenna to receive one or more DVB T stations that have picture and sound interference then you should change the location of where the antenna is set up To help you direct your antenna or to help you determine the most suitable location to set up the antenna your TV set has a display for the signal quality C N and the signal strength Level Consult your specialist dealer to find out which channels and frequency bands VHF or UHF are used to broadcast the digital TV stations in your area On any one channel several digital stations are broadcast Select a TV channel 1 Call the TV menu via the MENU button 2 Use 4 to select Settings then use e to select the menu line underneath 3 Select Stations then use e to select the menu line underneath INFO END lt gt Parental lock Timer functions Language 4 Select Manual adjustment and call the menu using OK not possible for MHEG 5 device versions x27 28 Manual adjustment Signal source DVB T gt DVB C Lc oo pg 5 For digital stations select Signal source DVB T 6 Use the numerical buttons to specify the corresponding channel number Depending on the channel selected and country the system automatically sets the corresponding bandwidth of 7 or 8 MHz You should only change the band width under special circumstances if the channel raster in your area is different from the standard When
75. th OK Red back to the previously seen page not in FLOF Displaying teletext pages Green on to the next page not in FLOF Stop self turning pages HOLD Yellow to the next topic only in TOP and FLOF Blue to the next topic group only in TOP and FLOF Zoom page top part bottom part normal size press button several times Other page selection options TV pict loff Split Text Select one page number specified on the page by using picture on off Split Text O v a Page Catching d Fettes 10 09 04 7 Teletext im Ersten gt 101 Tagesschau 110 112 Kultur Gesellschaft 200 600 Lotto Toto Australien Keine Zugestandnisse Tote bei Zugungl ck in Schweden TV Guide 300 400 Wirtschaft Internet www ard text de Inhalt tagesschau Page selection Ok View Tennis Haas unterliegt Hewitt Formel 1 Schumacher erneut vorne Tagesschau 110 112 Kultur u call Wetter 170 Gesellschaft 530 Sport 200 600 Lotto Toto 666 TV Guide 300 400 Wirtschaft 700 Internet www ard text de Inhalt tagesschau 29 GB Operating modes Teletext Programme timer recordings A video and or DVD recorder must be connected and logged in in the connection wizard Call the programme pages of the current station in teletext mode using the Direct recording button Scroll to the teletext page in wh
76. ting EPG You can see a Station list of the radio stations or with DVB T in UK the station logo In this case you can call up the station list by using the OK or INFO key Station list is sorted by LCN You can see a Station list of the radio stations Digital DVB T stations are indicated by hg DVB C stations by and DVB S stations by Encrypted stations are additionally indicated by Ga Ask your specialist dealer about decoders or the use of a CA module and a Smart Card for the reception of encrypted stations When time and title are sent by the marked station these data are displayed at the bottom of the station list You can switch off the screen with the red coloured key The LED indicator on the set changes from green to orange You can switch the screen display back on by using the OK key red or blue coloured keys by using RADIO MENU or END on the remote control or by using R on the control ring of the TV set Station switching with dark screen by using or on the control ring of the TV set or by using the remote control P and P or by using the numeric buttons for DVB T operation in UK the buttons may be configured differently by the provider The sound menu can be called in the radio mode using the 7 button Radio menu Call radio menu Radio menu gt Stations Timer functions INFO END In the radio menu as in TV mode you can set the sound search for radio stations and store them automatic
77. ton index select the first listing this is above A 2 Call the language selection by pressing the OK button 3 Now select the desired language and confirm it by pressing the OK key 4 Hide the menu again with the END button Miscellaneous settings On screen displays You can set the duration and position of the station and status display define the content of the status display and switch the automatic info texts on or off e On screen display position On screen display time Programme title Sound mode Time Alarmtime Sleep timer Automatic info Time and date If you receive teletext the set registers the time and date These are required for timer recordings timer functions and EPG If you do not receive teletext then you have to enter the date and time you should not switch off the set using the mains switch since the settings will then be lost DVB software Update of DVB software via satellite DVB subtitles e Subtitles off Subtitles for the Hearing Impaired e Subtitles as translation for foreign language programmes DVB character set e Western European Polish Standard Only for sets with DVB S 22 DVB subtitles If the station provides DVB subtitles then you can have the TV display them permanently or suppress their display You can also select between subtitles for translation or for impaired hearing 1 Call the TV menu via the MENU button Select the Settings l
78. ttons OGO JQOOE ww S60 call selected station OZO P Blue coloured key sort alphabetically according to bouquets numerically COMP IN CNN INT HDMI DVI CAM VGA AVS DELUXE DVD DSF VCR EUROSPRT ARD HOT BR ALPHA HR BR3 KIKA Op Switch to Scan stations ia z Select letter gt Change stations Change sorting For an alphabetical display Enter letters with the numeric button like on a mobile phone keypad select with a 4 and call with OK For bouquet display sorting according to broadcasting chains only for DVB sta tions not for DVB T stations in UK Enter bouquet number select with e a 4 gt and call with OK Digital DVB T stations are indicated by 9 DVB C stations by D i and DVB S stations by RB Encrypted stations are additionally indicated by Gad Ask your specialist dealer about decoders or the use of a CA module and a Smart Card for the reception of encrypted stations Daily operation Basics about the Menu operation Menus are called via the MENU button or via the button for special menus and can be hidden by using these buttons or by using the END button The menu is displayed in the bottom section of the screen At the top you can see additional information for the menu point selected In the menus navigate by using the cur sor a ed gt You can make settings by using 4 When you exit the menu the settings are adopted Example of the menu operation
79. ture or timer recording Station down in the menu left 4 Switch TV set on off to standby Radio only for DVB reception provided the station broadcasts this Otherwise switch over to an audio input Only for sets with Digital Recorder GB 4 Radio on off back to TV mode Switching on the radio from standby in the menu down w Call the menu in the menu up a Station up in the menu right gt Display DR white Digital Recorder integrated but not active no recording no play green Digital Recorder active timeshift or archive playback red Digital Recorder active archive recording Connections to rear panel Xelos A 26 Common interface CI Slot Headphone connection S VHS connection GE i e for camcorders Video input AVS Audio input right Audio input left Euro AV socket Retrofitting option for satellite tuner see pages 44 and 45 Mains switch II Socket tor power cable Service socket a VGA XGA input Satellite connection socket HDMI DVI input Digital audio output Digital audio input Component video inputs Cb Pb Cr Pr Y 5 Connections to rear panel Xelos A 32 37 and Modus L 32 37 SNA Common Interface Cl Slot Headphones connection S VHS connection AVS i e for camcorders Video input AVS Audio input right Audio input left Mains switch Antenna cable DG Cent
80. using the on off button on the set If a new software version has been found the set will indicate this with an on screen message the next time the set is switched on You can decide whether or not you want to download the new software Contirm using OK so that the new software can be loaded and installed via satellite Continue as set out in the Downloading software section Searching for new software If you want to carry out a manual search for new software proceed as follows 1 Call the TV menu using the MENU button 2 Confirm the Settings using OK 3 Confirm the Miscellaneous using OK 4 Select DVB software and press OK Update digital TV software Current version V3 x x You can search for a new software version with OK 5 If you start the search using OK the set checks if there is a new software version available 6 If there is a new version available the set generates an on screen message Update digital TV software Current version V3 x x New version V3 1 0 Downloading software If you press OK in the dialogue above you can decide whether you want to download the new software immediately when you switch off the set or not at all We recommend you always carry out the update of the digital software This is the only way to ensure your set is always up to date NO If you do decide to update the software is initialised on your set and you are informed of
81. uttons of the remote control The set has a dynamic memory with 1680 station memory locations If up to 9 Stations are stored you only need to enter one digit up to 99 stations two digits are needed up to 999 stations three digits are needed refer to the station list to see how many stations have been stored 1 digit stations Press buttons 0 9 for one second and the station changes instantly long Or press button 0 9 briefly the station then changes after 2 seconds the station changes immediately when only 9 stations are saved 2 and 3 digit stations After briefly pressing the first numeric button s keep the last numeric button pressed for one second the Station then changes immediately Or press all numeric buttons briefly the station then changes after 2 seconds the station changes immedia tely if up to 99 or 999 stations are saved 4 digit stations Press the four numeric buttons briefly the channel then changes immediately short short long Call last viewed station for DVB T stations in UK You can switch back and forth quickly between two stations using this button Via the station list COMP IN HDMI DVI VGA AVS DVD VCR VIDEO ARD ZDF SAT 1 RTL VOX 0k Switch to 0 8 Select station Scan stations END E Change stations Change sorting Select the station if possible the selected station will be dis played as a small picture Or select with numeric bu
82. w Video IN CVBS VHS 8mm Cinch white red Audio IN L R IEC socket 75 Ohm 5 V 80 mA Antenna cable analogue PIP DVB T C F socket 75 Ohm 13 18 V 350 mA ANT SAT EURO AV 1 Video IN Y C S VHS Hi 8 CVBS VHS 8mm Video OUT CVBS VHS 8mm Y C S VHS Hi 8 Audio IN L R Audio OUT L R EURO AV 2 Video IN Y C S VHS Hi 8 CVBS VHS 8mm RGB YUV Video OUT CVBS Y C only with SVHS Link Plus Audio IN L R Audio OUT L R Cinch Audio IN max 2Vrms Centre 2x Cinch Audio IN L R 2 x Cinch Audio OUT level adjustable in active loud speakers L R Cinch COMPONENT IN Cb Pb signal Cinch COMPONENT IN Cr Pr signal Cinch COMPONENT IN Y signal Cinch Digital Audio IN SPDIF Digital audio Cinch Digital Audio OUT SPDIF Digital audio HDMI DVI Digital Video Audio IN type A 19pin Digital video and audio VGA XGA VGA XGA IN PC STB video signal Mini DIN SERVICE Service L Link Set specific equipment and retrofitting options for PIP and satellite tuners see pages 44 and 45 Accessories Wall holders and stands Refer to the notes on the installation options on page 8 PIP tuner The PIP tuner enables picture in picture displays PIP for analogue terrestrial and cable reception You can retrofit either this PIP tuner or a digital satellite tuner The PIP function is possible with both retrofit versions You can find the retrofitting options for your set in the table on the next page Loewe order no 89442080 Digital Satellite Tuner

Download Pdf Manuals

Related Search

Related Contents

haddam volunteer fire company engine 6  LG LAC8900RN car media receiver  Bedienungsanleitung HS-928 - Sondermeier Elektrofahrzeuge  Philips XS1956CI User's Manual  Samsung กล้องคอมแพค WB210 คู่มือการใช้งาน  Origin Storage 320GB SATA 256-bit AES TCG OPAL  Philips Vision Moto Automotive headlighting lamp 12342PRBW  Operating Instructions  Rexel Centor  パワーアナライザ PW6001  

Copyright © All rights reserved. Failed to retrieve file