Linhof Master Technika 3000 Amendments for Operating
Contents
1. For adapting the Master Technika Rapid Change Adapter Slide the revolving back can now be removed LINHOF PRAZISIONS SYSTEMTECHNIK GMBH RUPERT MAYER STRASSE 45 D 81379 M NCHEN TEL 49 89 724920 FAX 49 89 72492250 info linhof de www linhof de2. without vignetting even when using extreme wide angle lenses The accessory shoe can now easily be removed with the aid of an allen key added to the camera for using the tripod thread underneath permitting photography with the camera upside down This also improves the vertical shift facilities of the camera WIDE ANGLE FOCUSING TRACK OF THE MASTER TECHNIKA 3000 The built in wide angle focusing track can now comfortably be operated by a turning knob outside the camera body For the extreme wide angle lenses 38 47 and 58 only one pair of infinity stops is necessary Each lens is supplied with an individually adjusted lensboard permitting to restrict the infinity stops to one pair only This facilitates the quick change of the camera from closed to operating position with any of these 3 lenses Operating position 1 Open the camera Let the drop bed down until the bed strut clicks into the notch required The new facility is the fourth notch permitting a further drop of the baseboard for avoiding vignetting when taking vertical images 2 Release clamping lever under the focusing knob for unlocking the wide angle focusing track Front position locked rear position unlocked 3 Move the wide angle focusing track with the turning knob the start posi tion disc automatically clicks into the infinity mark Turn back the focusing track to stop position by with the turning knob 4 Fold up infinity stops if placed on the wide angle focu
3. MADE IN GERMANY f MAST E R SYSTEM AMENDMENTS FOR OPERATING LINHOF PRAZISIONS SYSTEMTECHNIK GMBH Easily detachable acces sory shoe covering a tripod mount An allen key for unscrewing is added also with Master Technika classic By pulling out the four holding slides you can take off the revolving back of the Master Technika for adapting the Rapid Change Adapter Slide also with Master Technika classic ONLY MASTER TECHNIKA 3000 Turning knob for easy out side moving of the built in wide angle focusing track A clamping lever is situa ted under the knob arrow AMENDMENTS FOR OPERATING MASTER TECHNIKA CLASSIC AND 3000 The struts of the drop bed now offer 4 inste ad of 3 notches The baseboard can therefo re be further dropped for avoiding vignetting also with Master Technika classic ONLY MASTER TECHNIKA 3000 Disc showing the start position with marks for infinity ONLY MASTER TECHNIKA 3000 One pair of infinity stops for 3 wide angle lenses 38 47 and 58 Linhof Master Technika 3000 with built in wide angle focusing track and dropped baseboard AMENDMENTS FOR OPERATING MASTER TECHNIKA CLASSIC AND 3000 Please note the following design improvements of the new Linhof Master Technika classic and Master Technika 3000 The baseboard can now be dropped with a fourth notch of the struts thus per mitting vertical images
4. sing track Pull out lens standard with the pull out grips 11 until infinity stops Taking posi tion for focusing to infinity is given The mounting of the infinity stops to be adjusted with the corresponding lens should be done in the Munich factory or by an authorized Linhof service 8 Focusing of shorter distances than above is always handled with ground glass control Closing the camera Before closing the camera remove the lens and follow this procedure 1 Pull out the wide angle focusing track with the focusing knob Turn the Starting position disc in the direction of the arrow until stop and press the spring loaded disc whilst returning with the aid of the focusing knob until the park position is reached 2 Push back the lens standard with the aid of the grips 11 until stop Press both drop bed struts 17 and close the baseboard see page 9 Linhofl OPERATING HINTS FOR GROUNDGLASS BACK MASTER TECHNIKA CLASSIC AND MASTER TECHNIKA 3000 DETACHABLE GROUNDGLASS BACK OF MASTER TECHNIKA CLASSIC AND MASTER TECHNIKA 3000 For adapting the new Rapid Change Adapter Slide 001618 operating digital backs the groundglass back can now be removed Push the release push button 39 of the revolving frame for unlocking and turn the revolving back 24 by 45 degrees By pulling out the 4 holding slides red arrows the total groundglass back is unlocked The back can be taken off and can be replaced by the Rapid Change Adapter Slide
Download Pdf Manuals
Related Search