Lightolier IS:412 User's Manual
Contents
1. READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING LUMINAIRE INSTRUCTION SHEET NO This luminaire is intended for installation in accordance with the National Electrical Code and local regulations To assure full compliance with local codes and regulations check with your local electrical inspector before IS 7 41 2 installation To prevent electric shock turn off electricity at fuse box before proceeding m Retain these instructions for maintenance reference A0504 Page 1 of 1 INSTRUCTION SHEET FOR 12 PENDALYTE PERFORMANCE POWERHEAD Note This instruction sheet covers two luminaire styles Powerhead assembly lamp type and reflector style may vary slightly from that shown although installation is the same To wire POWERHEAD to suspension kit Cable or Stem Mount sold separately follow instructions enclosed with individual suspension kit and connect as follows Using wire nuts local hardware item connect black lead to hot black power lead connect white lead to neutral white power lead connect green bare leads to ground green lead CAUTION MAXIMUM WATTAGE AS MARKED ON LUMINAIRE MUST NOT BE EXCEEDED GLASS SHADE amp ALUMINUM REFLECTOR INSTALLATION CAUTION Wear safety glasses Glass is fragile Handle with care Broken glass may pose a personal safety hazard NOTE Natural oils and soil may discolor and stain glass finish Wearing clean cotton gloves is recommended 1 Locate RETAINER CUP and 8 32 SCREWS suppli2. ed with POWERHEAD Place RETAINER CUP up through GLASS SHADE or ALUMINUM REFLECTOR Slide TRIM RING down over RETAINER CUP for use with GLASS SHADE only Align keyed holes on CUP with POWERHEAD and rotate into position Use the 8 32 SCREWS to secure in position lt POWERHEAD TRIM RING ALUMINUM REFLECTOR OR GLASS SHADE 8 32 SCREWS RETAINER CUP IGHTOLIER 2 Gicennt ICS IA TOOL TERR 63 Arport Road Fal River Ma 02720
Download Pdf Manuals
Related Search