Life Fitness TRAINER 9500 User's Manual
Contents
1. HOWN IN FIGURE A M051 00K46 A0082. Life Fitness 9500 Aerobic Trainer CVA Kit Installation Kit Includes 1 Transformer W Line Cord 1 PC Communications Cable 3 Cable Ties 1 Console Assembly PC Communications Cabl Line Cord Transformer Front Stabilizer Cable Tie Cable Clamp Cable Tie ao Figure A Step 1 Carefully tilt the Lifecycle 9500 Aerobic trainer backwards until it rests on the back of its seat Step 2 Carefully plug the PC COMMUNICATIONS CABLE into the bike connector housing See Figure A Finger tighten the thumb screws Cable Tie Clamp Step 3 Insert the TRANSFORMER PLUG into the power receptacle located on the connector housing Align the TRANSFORMER LINE CORD with the CABLE TIE CLAMP leaving a small loop in the cord at the TRANSFORMER PLUG Guide a REUSABLE r CABLE TIE through the the CABLE TIE CLAMP and around the amp mm TRANSFORMER LINE CORD Detail C Tighten the CABLE TIE CLAMP around the TRANSFORMER LINE CORD DETAIL c Reusable Cable Tie Small Loop In Line Cord NOTE DO NOT TRIM CABLE TIES Step 4 Apply the two reusable cable ties to combine the TRANSFORMER LINE CORD and the PC COMMUNICATIONS CABLE as shown in Figure A Route the combined cables over the top of the front STABILIZER BAR Carefully tilt the bike back to the upright position WARNING TO PREVENT CABLE DAMAGE THE PC COMMUNICATIONS AND TRANSFORMER CABLES MUST BE ROUTED ON TOP OF THE FRONT STABILIZER BAR AS S
Download Pdf Manuals
Related Search