Home

Lenovo ThinkVision L201p User's Manual

image

Contents

1. Fuzzy lines in text ora blurry image Horizontal or vertical lines through the image Image setup has not been optimized Your system Display Properties setting have not been optimized Adjust the resolution settings on your system to match the native resolution for this monitor 1600 x 1200 at 60 Hz Adjusting your monitor image on page 2 3 Manual image setup Perform automatic image setup If automatic image setup does not help perform manual image setup Selecting a supported display mode on page 2 6 When working in the native resolution you may find additional improvements by adjusting the Dots Per Inch DPI setting on your system See the Advanced section of your system s display properties Manual image setup If automatic image setup does not establish the image that you prefer perform manual image setup Note Have your monitor powered on for about 15 minutes until the monitor warms up 1 2 Press at the bottom of the monitor to open the OSD menu Use or gt to select C and press to access Use or gt to select Clock and Phase adjustment e Clock pixel frequency adjusts the number of pixels scanned by one horizontal sweep If the frequency is not correct the screen shows vertical stripes and the picture does not have the correct width Phase adjusts the phase of the pixel clock signal With a wrong phase
2. Select Let me pick from a list of device drivers on my computer Insert the Lenovo Monitor CD into the CD drive and click the Have Disk button Ensure that the CD drive letter is selected and then click OK Select ThinkVision L201p monitor and click Next The files will be copied from the CD to your hard disk drive 16 Close all open windows and remove the CD NO 00 NINN gt na 1 1 1 1 nA BW N 17 Restart the computer The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles Note On LCD monitors unlike CRTs a faster refresh rate does not improve display quality Lenovo recommends using either 1600 x 1200 at a refresh rate of 60 Hz or 640 x 480 at a refresh rate of 60 Hz Installing the monitor driver in Windows XP To use the Plug and Play feature in Windows XP files should be loaded from the Reference and Driver CD Note This section must be completed before continuing with the Windows XP automatic image setup 1 Turn off the computer and all attached devices 2 Ensure that the monitor is connected correctly 3 Turn on the monitor and then the system unit Allow the system to boot into Windows XP 4 Open the Display Properties window by clicking Start gt Settings gt Control Panel and then double clicking the Display icon Click the Settings tab Click the Advanced button Click the Monitor tab Click the Properties button Click the Drivers t
3. Advanced button Click the Monitor tab Click the Properties button Click the Drivers tab 10 Open the Upgrade Device Driver Wizard window by clicking on Update Driver and then click Next 11 Select Display a list of the known drivers for this device so that I can choose a specific driver and then click Next 12 Insert the Setup CD into the CD drive then click the Have Disk button 13 Chick OK 14 Ensure that the CD drive letter 1s selected 15 Choose ThinkVision L201p Monitor and click OK The files will be copied from the CD to your hard disk drive CO S DONI Hn 16 Close all open windows and remove the CD 17 Restart the system The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles Note On LCD monitors unlike CRTs a faster refresh rate does not improve display quality Lenovo recommends using either 1600 x 1200 at a refresh rate of 60 Hz or 640 x 480 at a refresh rate of 60 Hz Getting further help If you still can t solve your problem please contact the Lenovo Support Center For more information on contacting the Support Center please see Appendix A Service and Support on page A 1 3 6 ThinkVision L201p Flat Panel Monitor User s Guide Service information Product numbers The product number for your monitor is located on the side of the display bezel as shown below Customer responsibilities The warranty does not apply to a produc
4. Image Setup Automatic 2 Manually optimizes the image See Manual image M l setup on page 3 4 anua Clock Phase Save Image Properties Color Adjusts intensity of red green and blue Use and gt buttons to increase or decrease each of three colors Red Green and Blue independently to get the suitable color Brightness and Contrast can t be adjusted in SRGB mode Preset mode Default sRGB e Reddish Bluish Custom e Red Increases or decreases the saturation of red in the image Green Increases or decreases the saturation of green in the image Blue Increases or decreases the saturation of blue in the image e Save Saves the custom color choices A Scaling offnative 1 1 onexpand the image to full screen Same as Analog 2 4 ThinkVision L201p Flat Panel Monitor User s Guide Table 2 2 OSD functions Controls and Controls and OSD Icon on Main Adjustments Adjustments Menu Submenu Description Analog Digital 1522 This monitor can accept video signals through three Same as Analog i ideo signal different connectors Most desktop computers use a D nput video aliens SUB connector Select digital among OSD Controls when you use DVI connector Selects D SUB Analog Selects DVI Analog Selects DVI Digital Shows resolution refresh rate and product details Same as Analo O p g Opt
5. adjustment the picture has horizontal disturbances in light picture Press C to leave the OSD menu 3 4 ThinkVision L201p Flat Panel Monitor User s Guide When the image no longer looks distorted save the Clock and Phase adjustments Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows Vista Microsoft Windows XP and Microsoft Windows 2000 Professional Please see the Install Driver section of the Reference and Driver CD for automatic installation Installing the monitor driver in Windows Vista To install the device driver in Microsoft Windows Vista do the following Note You must download files from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista 1 Turn off the computer and all attached devices 2 Ensure that the monitor is connected correctly 3 Turn on the monitor and then the system unit Allow your computer to start the Windows Vista operating system 4 Open the Display Properties window by clicking Start Control Panel and then double clicking the Hardware and Sound icon Click the Personalization icon Click the Display Settings icon Click the Advanced Settings button Click the Monitor tab Click the Properties button 0 Click the Driver tab Open the Update Driver Software Generic PnP Monitor window by clicking on Update Driver and then click the Browse my computer for driver sfotware button
6. full explanation of Lenovo warranty terms Online technical support Online technical support 1s available during the life of your product through the Personal Computing Support Web site at http www lenovo com think support During the warranty period assistance for replacement or exchange of defective components is available In addition 1f your option is installed in a ThinkPad or ThinkCentre computer you might be entitled to service at your location Your technical support representative can help you determine the best alternative Telephone technical support Installation and configuration support through the Customer Support Center will be withdrawn or made available for a fee at Lenovo s discretion 90 days after the option has been withdrawn from marketing Additional support offerings including step by step installation assistance are available for a nominal fee To assist the technical support representative have available as much of the following information as possible Option name Option number Proof of purchase Computer manufacturer model serial number and manual Exact wording of the error message if any Description of the problem Hardware and software configuration information for your system If possible be at your computer Your technical support representative might want to walk you through the problem during the call Worldwide telephone list Phone numbers are subject to change without n
7. have BAG Wy T I ee age a Veg Salve e Aui aoa Erbe eee ea 1 3 Cable lock Slot eat E ac ale Sara a e a ae ety a ly sm at ea nd Reto eo Andie ae tau cana tol tratas 1 4 Setting UP your MON OL ss coe sec er Rr EE eese eed I RU RECEIVE ER Tarn Ie wens eee eo 1 4 Connecting and turning on your monitor selle eem ehh n ran 1 4 R gistering your producto cotta o eee EN LUE Cer er e SEA Rai A 28 Ren eg AO RON Ls 1 6 Chapter 2 Adjusting and using your monitor 0 00 ce eee eee 2 1 Comfort aridiaccessibility 2 04785 neo ees REA eR ARS d epe ue SEMPER dd RA RH ANE Og y Marten we E 2 1 Arranging Your Work area 2 a deoa ge YR EUR Rex x PT AG UP PAGAR TC aaa AR TG vad ct eed de da bea 2 1 Positioning and viewing your monitor isse hh s e e e 2 1 Quick tips for healthy work habits cossas esa aana a ene hh hs 2 2 Accessibility information ese veo ut erem snm ne dia Mise dla cadis Re abel ote rie eed rene bebe deadly e Dy eroe e UR 2 2 Adjusting your monitor ama ge 2s sse eR ces tne ate eels wae e 2 3 Using the direct access cont diese ree ere eR eee meme era ex be ale neg a UR be P UR es RU e Rie ice 2 3 Using the On Screen Display OSD controls 00 0 ee m m e ran 2 3 Selecting a supported display mode ms sesiis 2 T a E eee een eee hh eh hen 2 6 Image rotation o in basen eee cp A cnet alee y i axe RAIS Bla tere A wis aay ia Pia ieee do tees re WR WU Dri 2 6 Understanding power management 0 0 nen ne eben eee eh rr 2 7
8. lock slot Types of adjustments Please see the illustration below for an example of the tilt range 0 30 E Swivel With the built in pedestal you can swivel the monitor for the most comfortable viewing angle P AERE 1 amp 45 45 gt Height Adjustment After pressing the top of the monitor remove the fixed pin and adjust the height of the monitor 1 2 ThinkVision L201p Flat Panel Monitor User s Guide Monitor Pivot 1 In locked down Position Tilt upwards so that lower edge of monitor clears the stand Rotate clockwise until the monitor stops at 90 2 Extended Position Rotate clockwise until the monitor stops at 90 User controls Your monitor has controls on the front which are used to adjust the display For information on how to use these controls please see Adjusting your monitor image on page 2 3 Chapter 1 1 3 Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor in the lower right corner Please see the instructions that come with the cable lock to learn how to attach it 3 Setting up your monitor This section provides information on how to set up your monitor Connecting and turning on your monitor Note Be sure to read the Safety Information located in the Monitor Safety Troubleshooting and Warranty Guide before carrying out this procedure 1 Power off your computer and all attached devices and
9. nearby windows The following are some other tips for comfortable viewing of your monitor e Use adequate lighting for the type of work you are performing Use the monitor brightness contrast and image adjustment controls if equipped to optimize the image on your screen to meet your visual preferences Quick tips for healthy work habits The following information is a summary of some important factors to consider to help you remain comfortable and productive while you use your computer Good posture starts with equipment setup The layout of your work area and the setup of your computer equipment have a large effect on your posture while using your computer Be sure to optimize the position and orientation of your equipment by following the tips outlined in Arranging your work area on page 2 1 so you can maintain a comfortable and productive posture Also be sure to use the adjustment capabilities of your computer components and office furniture to best suit your preferences now and as your preferences change over time Minor changes in posture can help avoid discomfort The longer you sit and work with your computer the more important it is to observe your working posture Avoid assuming any one posture for an extended period of time Periodically make minor modifications in your posture to help deter any discomforts that might arise Make use of any adjustments that your office furniture or equipment provide to accommodate chan
10. power cord is loose or disconnected e There is no power at the outlet Besure the power cord is connected properly Besure the outlet has power Power on the monitor Try using another power cord Try using another electrical outlet Connecting and turning on your monitor on page 1 4 Screen is blank and power indicator is steady amber or flashing green The monitor is in Standby Suspend mode Pressany key on the keyboard or move the mouse to restore operation Check the Power Options settings on your computer Understanding power management on page 2 7 Chapter 3 3 3 Table 3 2 Troubleshooting Problem Possible cause Suggested action Reference The power indicator is green but there is no image The video signal cable is loose or disconnected from the system or monitor Be sure the video cable is connected with the system properly Connecting and turning on your monitor on page 1 4 The monitor brightness and contrast are at the lowest setting Adjust the brightness and contrast setting on the OSD menu Adjusting your monitor image on page 2 3 One or more of the pixels appear discolored This is a characteristic of the LCD technology and is not an LCD defect If there are more than five pixels missing contact the Support Center Appendix A Service and Support on page A 1
11. 1929 Spanish Ecuador 1 800 426911 Spanish El Salvador 250 5696 Spanish Estonia 386 61 1796 699 Finland Up and running support 09 459 6960 Warranty service and support 358 800 1 4260 Finnish France Up and running support 0238 557 450 Warranty service and support hardware 0810 631 213 Warranty service and support software 0810 63 1 020 French Germany Up and running support 07032 15 49201 Warranty service and support 01805 25 35 58 German A 2 ThinkVision L201p Flat Panel Monitor User s Guide Country or Region Telephone Number Greece 30 210 680 1700 Guatemala 335 8490 Spanish Honduras Tegucigalpa amp San Pedro Sula 232 4222 San Pedro Sula 552 2234 Spanish Hungary 36 1 382 5720 India 1600 44 6666 Alternate Toll Free 91 80 2678 8940 English Indonesia 800 140 3555 62 21 251 2955 English Bahasa Indonesian Ireland Up and running support 01 8 15 9202 Warranty service and support 01 881 1444 English Italy Up and running support 02 703 1 6101 Warranty service and support 39 800 820094 Italian Japan Desktop Toll free 0120 887 870 For International 81 46 266 4724 ThinkPad Toll free 0120 887 874 For International 81 46 266 4724 Both of the above numbers will be answered with a Japanese language voice prompt For telephone support in Engl
12. Caring for your monitor soksi caw be Ra IRA RA E ob AT HER BH RR er RR a e Pe ts we a Eee 2 8 Detaching the monitor Stade 2 8 Chapter 3 Reference information 02 0c eee eee 3 1 Monitor specifications Jesse die tease ce ee peg expe tle deleted lade Ma ele eee A SE ELE E e ole bebe eT ects 3 1 Troubleshooting ase cour A IG ag ARES puis GH BS Olt Bag HE Gens onto erus d has ax 3 2 Manualim ge Setup s ooi IA WA VIA I LR EARS RR ERES TAA di EUR SWR AER ate AAA ate SE rcd Sud 3 4 Manually installing the monitor driver lesse m eh n n n 3 5 Installing the device driver in Windows Vista lisse mh n 3 5 Installing the monitor driver in Windows XP 0 0 ee nee ence cnet been teen eens 3 5 Installing the monitor driver in Windows 2000 0 ccc cece eee e e ene ees 3 6 Getting further help ue oed e nds drcum rey Mv ea eee TRAD a aE oi da E e Qu eed a D Ro NEST Wet ee 3 6 Service informatio seoa stu edu eh te EK Gk ary ILE Ody INNER NARRANT E Pu PES 3 7 Product Numbers 5 av snc sn TA Uie gre COE Uere Werten E E E ee eae ee a EE TU dieta 3 7 Customer responsibilities Leere ep eec ee eren di gue mer tren 4 tle nay lent 8 eg ween eer ec ce x ceret e RR as LER 3 7 ServiCe Darts cocum siat a T S os A urbc bes Rae Go cau mdr o rh ye Mesa aaa 3 8 Appendix A Service and Support 0c eee eee nnne A 1 Onlinetechnical sipport ds e e IA uie tds a esc ee Led icem eek uh es s A fen A 1 Telephone technical
13. L201p Flat Panel Monitor User s Guide ThinkVision Product numbers 9220 HBI Fourth Edition Oct 2006 Copyright Lenovo 2006 All rights reserved U S GOVERNMENT USERS RESTRICTED RIGHTS Our products and or services are provided with RESTRICTED RIGHTS Use duplication or disclosure by the Government is subject to the GSA ADP Schedule contract with Lenovo Group Limited if any or the standard terms of this commercial license or if the agency is unable to accept this Program under these terms then we provide this Program under the provisions in set forth Commercial Computer Software Restricted Rights at FAR 52 227 19 when applicable or under Rights in Data General FAR 52 227 14 Alternate IIT Contents Safety information cis cese Ea RR Ron Oa aia eee eet we ROO QC CR CR UR RR AC S iii Chaptert Getting started xvii a ww Rom ROCA ee RR RECO 1 1 Shipping contents orci aller deer cant etm a eec date uiris a Meee Si wh eaa s 1 1 Product OVE VIEW i e DEDANS yc beta is SN ee ter eee AS TA Pea Me DU a has dolet des Ue Dass 1 1 Types of adjusttents eg Pag susto Gee GAG Gach ites ntes edite ete oh at Oe ORE SR vtae SAL s Gl e ERES 1 2 RUS WIVEL eote ri ATA ERR RR USE Aga Som doa en quete Gar BAIN De eas ER be ete 1 2 Height Adjustment z 5 eese cre Eee d m e es ea Ra Ea OG e eR ER EE a ded e ire ia n d UE EU A ee 1 2 Monitor duc PER das A ee Sad Sas aa dae a Ee as da A es 1 3 User Controls i52 hu edet E Euer ex A kee bee
14. ab 10 Open the Hardware Update Wizard window by clicking on Update Driver and then click Next 11 Select Install from a list or Specific location Advanced and then click Next SORIA Chapter 3 3 5 12 Insert the Setup CD into the CD drive then click the Have Disk button 13 Click OK 14 Ensure that the CD drive letter is selected 15 Choose ThinkVision L201p Monitor and click OK The files will be copied from the CD to your hard disk drive 16 Close all open windows and remove the CD 17 Restart the system The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles Note On LCD monitors unlike CRTs a faster refresh rate does not improve display quality Lenovo recommends using either 1600 x 1200 at a refresh rate of 60 Hz or 640 x 480 at a refresh rate of 60 Hz Installing the monitor driver in Windows 2000 To use the Plug and Play feature in Windows 2000 files should be loaded from the Reference and Driver CD Note This section must be completed before continuing with the Windows 2000 automatic image setup 1 Turn off the computer and all attached devices 2 Ensure that the monitor is connected correctly 3 Tum on the monitor and then the system unit Allow the system to boot into Windows 2000 4 Open the Display Properties window by clicking Start gt Settings Control Panel and then double clicking the Display icon Click the Settings tab Click the
15. ac tohoto produktu si p e t te prtucku bezpecnostn h instrukc TERA POZA E Safety Information 244 40 FRA AR HAM RARA id cula de j Gay qu Les sikkerhedsforskrifterne for du installerer dette produkt HROREORMI ZERRE RRA L ESL usas SoN Ad 4 ABS SIedAS Antes de instalar este producto lea la informaci n de seguridad Antes de instalar este produto leia as Informa es de Seguran a Nepeg ycraHoBKo nponykra npourure NHCTpyKUMM no rexauke 6esoriacHocrM Lees voordat u dit product installeert eerst de veiligheidsvoorschriften ThinkVision L201p Flat Panel Monitor User s Guide Chapter 1 Getting started This User s Guide contains detailed information on the ThinkVision L201p Flat Panel Monitor For a quick overview please see the Setup Poster that was shipped with your monitor Shipping contents The product package should include the following items ThinkVision L201p Flat Panel Monitor Setup Poster Monitor Safety Troubleshooting and Warranty Guide Reference and Driver CD ThinkVision L201p Flat Panel Monitor Power Cord Analog Interface Cable Attached to monitor Digital Interface Cable Attached to monitor zg Note To attach a VESA mount please see Understanding power management on page 2 7 Copyright Lenovo 2006 Product overview This section will provide information on adjusting monitor positions setting user controls and using the cable
16. f your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor you may need to re attach the CRT monitor temporarily until you have re configured the system preferably to 1600 x 1200 at 60 Hz which is the Native Resolution Display mode The display modes shown below have been optimized at the factory Table 2 3 Factory set display modes Addressability Refresh rate 640 x 350 70 Hz 640 x 480 60 Hz 67 Hz 72 Hz 85Hz 720 x 400 70 Hz 800 x 600 56Hz 60 Hz 72 Hz 75 Hz 1024 x 768 60 Hz 70 Hz 75 Hz 85Hz 1280 x 1024 60 Hz 70 Hz 75 Hz 85Hz 1600 x 1200 60 Hz Image rotation Before rotating the monitor you should set up your computer to rotate the image Rotating the image may require special imaging software or you may find that your computer is preloaded with video graphic drivers that enable image rotation Check the Graphic Properties setting on your computer to see if this feature is available Try these steps to verify 1f image rotation is available on your computer Right click on the desktop and click Properties 2 Select the Settings tab and click Advanced 3 Ifyou have ATI select the Rotation tab and set the preferred rotation If you have nVidia click the nVidia tab in the left hand column select NVRotate and then select the preferred rotation If you have Intel select the Intel graphics tab click Grap
17. ges in posture Short periodic breaks help ensure healthy computing Because computing is primarily a static activity it is particularly important to take short breaks from your work Periodically stand up from your work area stretch walk for a drink of water or otherwise take a short break from using your computer A short break from work gives your body a welcome change in posture and helps to ensure you remain comfortable and productive while you do work Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities With assistive technologies users can access information in the way most appropriate to their disability Some of these technologies are already provided in your operating system others can be purchased through vendors or accessed at http www ibm com able 2 2 ThinkVision L201p Flat Panel Monitor User s Guide Adjusting your monitor image This section describes the user control features for adjusting your monitor image Using the direct access controls The direct access controls can be used when the On Screen Display OSD is not displayed Note The direct access controls are blue Icon Control Description C9 Image Setup Activates automatic image adjustment 4 Brightness Direct access to Brightness adjustment 1292 Input Change Switches the video input source Using the On Screen Display OSD controls To ad
18. hic Properties select the Rotation tab and then set the preferred rotation Check with the manufacturer of your computer to see if graphic drivers with image rotation can be downloaded from their support website 2 6 ThinkVision L201p Flat Panel Monitor User s Guide Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user definable period There are several states as described in the table below For optimal performance switch off your monitor at the end of each working day or whenever you expect to leave it unused for long periods during the day Table 2 4 Power indicator State Power Indicator Screen Restoring Operation Compliance On Steady green Normal Standby Suspend Amber Blank Press a key or move the mouse There may be a slight delay before the image reappears Note Standby also occurs ifthere is no image output to the monitor ENERGY STAR Off Off Blank Press a key or move the mouse There may be a slight delay before the image reappears ENERGY STAR Chapter 2 2 7 Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor Do not Apply water or liquid directly to your monitor Use solvents or abrasives Use flammable cleaning materials to clean your monitor or any other electrica
19. ice names may be trademarks or service marks of others B 2 ThinkVision L201p Flat Panel Monitor User s Guide
20. ions Information Note This screen does not allow any changes to the settings o This section lists the languages supported by your monitor Language Note The language chosen only affects the language of the OSD It has no effect on any software running on the computer E Menu position adjusts menu location on the screen Same as Analog Menu Position Default Default returns the menu position to the default settings Custom Horizontal Changes the horizontal position of the OSD e Vertical Changes the vertical position of the OSD Q Reset Accessibility Cancel Reset Save Resets monitor to the original factory settings Controls button and menu settings for accessibility preferences QJ Button repeat rate Select or to change Off Default Slow Menu time out Sets the length of time the OSD will remain active after the last time a button is pressed Chapter 2 2 5 Selecting a supported display mode The display mode the monitor uses is controlled by the computer Therefore refer to your computer documentation for details on how to change display modes The image size position and shape might change when the display mode changes This is normal and the image can be readjusted using automatic image setup and the image controls Unlike CRT monitors which require a high refresh rate to minimize flicker LCD or Flat Panel technology is inherently flicker free Note I
21. ish please wait for the Japanese voice prompt to end and an operator will answer Please ask for English support please and your call will be transferred to an English speaking operator PC Software 0120 558 695 Overseas calls 81 44 200 8666 Japanese Korea 1588 5801 Korean Latvia 386 61 1796 699 Lithuania 386 61 1796 699 Luxembourg 352 298 977 5063 French Malaysia 1800 88 8558 English Bahasa Melayu Malta 356 23 4175 Mexico 001 866 434 2080 Spanish Middle East 44 0 1475 555 055 Netherlands 31 20 514 5770 Dutch New Zealand 0800 446 149 English Nicaragua 255 6658 Spanish Appendix A A 3 Country or Region Telephone Number Norway Up and running support 6681 1100 Warranty service and support 8152 1550 Norwegian Panama 206 6047 Spanish Peru 0 800 50 866 Spanish Philippines 1800 1888 1426 63 2 995 8420 English Philipino Poland 48 22 878 6999 Portugal 351 21 892 7147 Portuguese Romania 4 021 224 4015 Russian Federation 7 095 940 2000 Russian Singapore 1800 3172 888 English Bahasa Melayu Slovakia 421 2 4954 1217 Slovenia 386 1 4796 699 Spain 91 714 7983 91 397 6503 Spanish Sri Lanka 94 11 2448 442 English Sweden Up and running support 08 477 4420 Warranty service and support 077 117 1040 Swedish Switzerland Up and running support 058 333 0900 Warranty ser
22. itor you might be able to solve it yourself Before calling your dealer or Lenovo try the suggested actions that are appropriate to your problem Table 3 2 Troubleshooting Problem Possible cause Suggested action Reference The words Out of Range are shown on the screen and the power indicator is flashing green The system is set to a display mode which is not supported by the monitor If you are replacing an old monitor reconnect it and adjust the display mode to within the specified range for your new monitor If using a Windows system restart the system in safe mode then select a supported display mode for your computer If these options do not work contact the Support Center Selecting a supported display mode on page 2 6 The image quality is unnacceptable The video signal cable is not connected with the monitor or system completely Be sure the signal cable is firmly plugged into the system and monitor Connecting and turning on your monitor on page 1 4 The color settings may be incorrect Select another color setting from the OSD menu Adjusting your monitor image on page 2 3 The automatic image setup function was not performed Perform automatic image setup Adjusting your monitor image on page 2 3 The power indictator is not lit and there is no image The monitor s power switch is not switched on The
23. iust the settings the user controls can be viewed through the OSD e NUM Nc x 0 To use the controls Press to open the main OSD menu 2 Use e or gt to move among the icons Select an icon and press to access that function If there is a sub menu you can move between options using or gt then press to select that function Use or to make adjustments Press to save 3 Press to move backwards through the sub menus and exit from the OSD 4 Pressandhold e for 10 seconds to lock the OSD This will prevent accidental adjustments to the OSD Press and hold for 10 seconds to unlock the OSD and allow adjustments to the OSD 5 Enables DDC CI by default Use OSD Exit Key Press and hold the 2 buttons for 10 seconds to disable enable DDC CI function The words DDC CI disable shows on the screen Chapter 2 2 3 Table 2 2 OSD functions Controls and Controls and OSD Icon on Main Adjustments Adjustments Menu Submenu Description Analog Digital Adjusts overall brightness Same as Analog xk xt E g a Brightness Brightness 5 id Contrast Adjusts difference between light Controls Locked 9 and dark areas ej not required for Contrast e gt digital input o o Moves the image left or right is a E Image Position Horizontal Position ES c gt M the i down e oves the image up or down xz Vertical Position c E Qo GO Automatically optimizes the image
24. l equipment Touch the screen area of your monitor with sharp or abrasive items This type of contact may cause permanent damage to your screen e Use any cleaner which contains an anti static solution or similar additives This may harm the coating of the screen area Do Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen Remove grease or finger marks with a damp cloth and a little mild detergent Detaching the monitor stand After placing the monitor face down on a clean surface or soft cloth remove the four screws from the stand to remove it from the monitor 2 8 ThinkVision L201p Flat Panel Monitor User s Guide Chapter 3 Reference information This section contains monitor specifications instructions to manually install the monitor driver troubleshooting information and service information Monitor specifications Table 3 1 Monitor specifications for type model 9220 xxx Maximum height Maximum width Dimensions Height 410 5 mm 16 2 in 520 5 mm 20 5 in Depth 248 0 mm 9 8 in Width 443 0 mm 17 4 in Stand Tilt Range 0 30 Swivel Range 45 45 Lift Range 110 0mm Pivot Yes clockwise 90 degree VESA mount Supported 100 mm 3 94 in Radial arm sold separately Image Viewable image size 510 mm 20 in 306 0 mm 12 05 in 408 0 mm 16 06 in Note Power consumption figures are for the monitor and
25. n on the following Web site http www lenovo com register Lenovo will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information 1 6 ThinkVision L201p Flat Panel Monitor User s Guide Chapter 2 Adjusting and using your monitor This section will give you information on adjusting and using your monitor Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform In addition use healthy work habits to maximize your performance and comfort while using your computer For more detailed information on any of these topics visit the Healthy Computing Web site at http www ibm com pc ww healthycomputing Arranging your work area O Copyright Lenovo 2006 Use a work surface of appropriate height and available working area to allow you to work in comfort Organize your work area to match the way you use materials and equipment Keep your work area clean and clear for the materials that you typically use and place the items that you use most frequently such as the computer mouse or telephone within the easiest reach Equipment layout and setup play a large role in your working posture The following topics describe how to optimize equipment set
26. ned in specific environments and is presented as an illustration The result obtained in other operating environments may vary Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you Any references in this publication to non Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites The materials at those Web sites are not part of the materials for this Lenovo product and use of those Web sites is at your own risk Any performance data contained herein was determined in a controlled environment Therefore the result obtained in other operating environments may vary significantly Some measurements may have been made on development level systems and there is no guarantee that these measurements will be the same on generally available systems Furthermore some measurements may have been estimated through extrapolation Actual results may vary Users of this document should verify the applicable data for their specific environment Trademarks The following terms are trademarks of Lenovo in the United States other countries or both Lenovo ThinkCentre ThinkPad ThinkVision ENERGY STAR and the ENERGY STAR logo are registered US trademarks Microsoft Windows and Windows NT are trademarks of Microsoft Corporation in the United States other countries or both Other company product or serv
27. oes not give you any license to these patents You can send license inquiries in writing to Lenovo United States Inc 500 Park Offices Drive Hwy 54 Research Triangle Park NC 27709 U S A Attention Lenovo Director of Licensing LENOVO GROUP LTD PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON INFRINGEMENT MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions therefore this statement may not apply to you This information could include technical inaccuracies or typographical errors Changes are periodically made to the information herein these changes will be incorporated in new editions of the publication Lenovo may make improvements and or changes in the product s and or the program s described in this publication at any time without notice The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons The information contained in this document does not affect or change Lenovo product specifications or warranties Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties All information contained in this document was obtai
28. otice For the most current phone numbers go to http www lenovo com think support and click Support phone list O Copyright Lenovo 2006 A 1 Country or Region Telephone Number Africa Africa 44 0 1475 555 055 South Africa 27 11 3028888 and 0800110756 Central Africa Contact the nearest Lenovo Business Partner Argentina 0800 666 0011 Spanish Australia 131 426 English Austria Up and running support 01 24592 5901 Warranty service and support 01 211 454 610 German Belgium Up and running support 02 210 9820 Dutch Up and running support 02 210 9800 French Warranty service and support 02 225 3611 Dutch French Bolivia 0800 0189 Spanish Brazil Sao Paulo region 11 3889 8986 Toll free outside Sao Paulo region 0800 7014 815 Brazilian Portuguese Canada 1 800 565 3344 English French In Toronto only call 416 383 3344 Chile 800 224 488 Spanish China 800 810 1818 Mandarin China Hong Kong S A R Home PC 852 2825 7799 Commercial PC 852 8205 0333 ThinkPad and WorkPad 852 2825 6580 Cantonese English Putonghua Colombia 1 800 912 3021 Spanish Costa Rica 284 3911 Spanish Croatia 0800 0426 Cyprus 357 22 841100 Czech Republic 420 2 7213 1316 Denmark Up and running support 4520 8200 Warranty service and support 7010 5150 Danish Dominican Republic 566 4755 566 5161 ext 8201 Toll Free within the Dominican Republic 1 200
29. support its posa eo n er te do der dao aa wes ETA Qui var a Casas A 1 Appendix B Notices 5 ide Ry aaa Sx Tn hee ee a ar ala B 1 TAD uris a ad os O nao TII SE B 2 O Copyright Lenovo 2006 iii Safety information v Before installing this product read the Safety Information Avant d installer ce produit lisez les consignes de s curit Vor der Installation dieses Produkts die Sicherheitshinweise lesen Mpv ykataotrjoete To ripoi v aut StaBdote tiq rnpodgop eq aoop Aeiaq safety information nma NWA NR 181p UT 13109 10110 739 A term k telep t se el tt olvassa el a Biztons gi el r sokat Prima di installare questo prodotto leggere le Informazioni sulla Sicurezza Antes de instalar este produto leia as Informa es de Seguran a L s s kerhetsinformationen innan du installerar den h r produkten Prije instalacije ovog produkta obavezno pro itajte Sigurnosne Upute Les sikkerhetsinformasjonen Safety Information f r du installerer dette produktet Przed zainstalowaniem tego produktu nale y zapozna si z ksi k Informacje dotycz ce bezpiecze stwa Safety Information Ipen na ce HHCTAJIMPA oBoj MPOAYKT npoynTajte HMHPOPpMalNnjaTa 3a 6ea6e mocr Pred in tal ciou tohto zariadenia si pe itaje Bezpe nostn predpisy Pred namestitvijo tega proizvoda preberite Varnostne informacije Ennen kuin asennat t m n tuotteen lue turvaohjeet kohdasta Safety Information P ed instal
30. t which has been damaged due to accident misuse abuse improper installation usage not in accordance with product specifications and instructions natural or personal disaster or unauthorized alterations repairs or modifications The following are examples of misuse or abuse and not covered by warranty mages burned onto the screen of a CRT monitor Burned image is preventable by utilizing a moving screen saver or power management e Physical damage to covers bezel base and cables Scratches or punctures on monitor screens Chapter 3 3 7 Service parts The following parts are for use by Lenovo service or Lenovo aurthorized dealers to support the customer warranty Parts are for service use only The table below shows information for model 9220 HB1 Table 3 3 List of service parts FRU field replaceable description machine type color unit part number model MTM 4141847 L201p FRU MONITOR 9220 HB1 Business Black 40Y7443 L201p FRU Signal cable Analog 9220 HB1 Business Black 40Y7444 L201p FRU Signal cable Digital 9220 HB1 40Y7445 L201p FRU Stand 9220 HB1 Business Black 3 8 ThinkVision L201p Flat Panel Monitor User s Guide Appendix A Service and Support The following information describes the technical support that is available for your product during the warranty period or throughout the life of the product Refer to your Lenovo Statement of Limited Warranty for a
31. the power supply combined Standby Suspend Off Pixel pitch 0 255 mm 010 in V Power input Supply voltage 90 264VAC 100 240VAC 10 L5A Max supply current Power consumption Normal operation 52W 2W Anolog lt 2W Digital lt 1W at 100 Vac amp 240Vac Video input Analog Input signal Horizontal addressability Vertical addressability Clock frequency Analog Direct Drive 75 ohm 0 7 1600 pixels max 1200 lines max 162 MHz O Copyright Lenovo 2006 3 1 Table 3 1 Monitor specifications for type model 9220 xxx Video input Digital Interface Input Signal Horizontal addressability Vertical addressability Clock frequency DVI VESA TMDS Panel Link 1600 pixels max 1200 lines max 162 MHz Communications VESA DDC CI Supported Display Modes VESA Standard modes between noted ranges Horizontal frequency Vertical frequency 30 kHz 81 kHz Pixel clock lt 165MHz 56 Hz 86 Hz Pixel clock lt 165MHz Native Resolution 1600 x 1200 at 60 Hz Temperature Operating 10 to 35 C 50 to 95 F Storage 20 to 60 C 4 to 140 F Shipping 20 to 60 C 4 to 140 F Humidity Operating 10 to 80 non condensing Storage 5 to 95 non condensing Shipping 5 to 95 non condensing 3 2 ThinkVision L201p Flat Panel Monitor User s Guide Troubleshooting If you have a problem setting up or using your mon
32. unplug the computer power cord O e 2 Connect the analog signal cable to the video port on the back of the computer Note One end of the signal cable is already pre attached to your monitor II Connect the digital cable to the DVI connector of the monitor and the other end on the back of the computer Note The digital cable is not included with the monitor 1 4 ThinkVision L201p Flat Panel Monitor User s Guide Plug the monitor power cord and the computer cord into grounded electrical outlets o A Power on the monitor and the computer O To install the monitor driver insert the Reference and Driver CD click Install driver and follow the on screen instructions Chapter 1 1 5 To optimize your monitor image press the Automatic Image Setup key Automatic image setup requires that the monitor is warmed up for at least 15 minutes This is not required for normal operation Note If automatic image setup does not establish the image that you prefer perform manual image setup See Manual image setup on page 3 4 Registering your option Thank you for purchasing this Lenovo product Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future Your feedback is valuable to us in developing product and services that are important to you as well as in developing better ways to communicte with you Register your optio
33. up to achieve and maintain good working posture Positioning and viewing your monitor Position and adjust your computer monitor for comfortable viewing by considering the following items Viewing distance Optimal viewing distances for monitors range from approximately 510mm to 760mm 20 in to 30 in and can vary depending on ambient light and time of day You can achieve different viewing distances by repositioning your monitor or by modifying your posture or chair position Use a viewing distance that is most comfortable for you Monitor height Position the monitor so your head and neck are in a comfortable and neutral vertical or upright position If your monitor does not have height adjustments you might have to place books or other sturdy objects under the base of the monitor to achieve the desired height A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye height when you are comfortably seated However be sure to optimize your monitor height so the line of site between your eyes and the center the monitor suits your preferences for visual distance and comfortable viewing when your eye muscles are in a relaxed state Tilt Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture General location Position your monitor to avoid glare or reflections on the screen from overhead lighting or
34. vice and support 0800 55 54 54 German French Italian Taiwan 886 2 8723 9799 Mandarin Thailand 1 800 299 229 Thai Turkey 00800 4463 2041 Turkish United Kingdom Up and running support 01475 555 055 Warranty service and support hardware 08705 500 900 Warranty service and support software 08457 151 516 English United States 1 800 426 7378 English Uruguay 000 411 005 6649 Spanish Venezuela 0 800 100 2011 Spanish Vietnam For northern area and Hanoi 84 4 8436675 For southern area and Ho Chi Minh City 84 8 829 5160 English Vietnamese A 4 ThinkVision L201p Flat Panel Monitor User s Guide Appendix B Notices O Copyright Lenovo 2006 Lenovo may not offer the products services or features discussed in this document in all countries Consult your local Lenovo representative for information on the products and services currently available in your area Any reference to a Lenovo product program or service is not intended to state or imply that only that Lenovo product program or service may be used Any functionally equivalent product program or service that does not infringe any Lenovo intellectual property right may be used instead However it is the user s responsibility to evaluate and verify the operation of any other product program or service Lenovo may have patents or pending patent applications covering subject matter described in this document The furnishing of this document d

Download Pdf Manuals

image

Related Search

Related Contents

  Philips SA2323 2GB* Flash audio player  HP G50-110EA User's Manual  TDSHーBA 東芝カラ一CCDテレビヵメラ取扱説明害  FideliO® DNA Polymerase    Instrucciones de servicio 471 830    138ページから162ページまで [PDFファイル/1.72MB]  

Copyright © All rights reserved.
Failed to retrieve file