Lennox Hearth GRANDVIEW P/N 506033-56 User's Manual
Contents
1. AUTO OPERATION Flip blower mode switch to auto position and turn blower speed dial clockwise until it clicks out of the off position When the stove warms up approx 15 20 Mins the blower will automatically turn on adjust blower speed dial to desired speed setting When the stove cools down the blower will automatically turn off Pa BLOWER SPEED 6 Ww Figure 3 Blower Controls NOTE DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE Lennox Hearth Products reserves the right to make changes at any time without notice in design materials specifications prices and also to discontinue colors styles and products Consult your local distributor for fireplace code information Printed in U S A 2011 Lennox Hearth Products P N 506033 56 Rev NC 08 2011 LENNOX HEARTH PRODUCTS 1508 Elm Hill Pike Suite 108 Nashville TN 372102. Tinnerman nuts into the four rect angular slots on the back of the stove Use of a flat head screw driver will be necessary Snap Switch Tinnerman Nut Figure 1 NOTE DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE Step 3 Install the four supplied allen screws into tinnerman nuts leaving loose A 1 8 allen wrench will be necessary Step 4 Place blower keyhole mounting slots onto the four installed screws and slide assembly downward ensuring all mounting screws are holding blower in place Tighten all four screws snugly NOTE POWER CORD WILL BE ON THE BOTTOM Step 5 Install temperature activated switch bracket into rectangle cutout in the upper right corner on rear of stove with wires facing out ward from the actual firebox Secure with the larger two supplied allen head screws A 5 32 allen wrench will be necessary NOTE ENSURE TEMPERATURE ACTIVATED SWITCH IS MAKING FIRM FLAT CONTACT WITH SIDE OF FIREBOX Step 6 Plug power cord into 120V wall outlet Figure 2 Installed Blower w Snap Switch BLOWER OPERATION The blower can be operated in either manual or automatic mode When operated automatically the blower will turn on when the stove is hot and turn off when the stove is cool MANUAL OPERATION Flip blower mode switch to the manual position up and adjust blower speed dial to desired setting to turn blower off rotate blower speed dial counter clockwise until it clicks OFF
3. LENNOX HEARTH PRODUCTS KITS AND ACCESSORIES P N 506033 56 TM HEARTH PRODUCTS Rev NC 08 2011 GRANDVIEW BLOWER KIT INSTALLATION INSTRUCTIONS FOR INSTALLING THE BLOWER ON A GRANDVIEW 230 WOODSTOVE COUNTRY COLLECTION KIT CONTENTS Please ensure that all these parts are included 1 ea Blower w snap switch assembly 6 ea 10 24 Screws 4ea Tinnerman nuts Grandview Blower Kit CO TOOLS NEEDED Flat Head Screwdriver 5 32 Allen Wrench 1 8 Allen Wrench GENERAL INFORMATION If you encounter any problems need clarification of these instructions or are not qualified to properly install this kit contact you local distributor or dealer Read this instruction sheet in its entirety before beginning the installa tion ALL WARNINGS PRECAUTIONS AND INSTRUCTIONS IN THE INSTAL LATION AND OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO THESE INSTRUCTIONS Check the contents of the kits upon receipt and check for any damaged or missing parts If there is hidden damage notify your freight company or Lennox Hearth Products dealer immediately CAUTION Wear gloves during installation in case of sharp edges on the stove INSTALLATION INSTRUCTIONS Step 1 Remove round knockout plate on back of stove by removing the screw on the top of the knockout with a 5 32 allen wrench You can then push on the top and bottom of the plate to loosen for removal Step 2 Install the four supplied flat
Download Pdf Manuals
Related Search