Kramer Electronics FC-49 User's Manual
Contents
1. Display type Screen size 700 x 390 mm 31 5 in Power management Not supported Extension blocs 1 CEA EXT TB ar ROET Not supported Color characteristics Default color space Non sRGB Display gamma 2 20 Red chromaticit Rx 0 640 Ry 0 341 Green chromaticity Gx 0 286 Gy 0 610 Blue chromaticity Bx 0 146 By 0 069 White point default Wx 0 284 Wy 0 293 Additional descriptors None Timing characteristics Horizontal scan range 30 91kHz Vertical scan range 55 85Hz Video bandwidth 160MHz CVT standard Not supported GTF standard Supported Additional descriptors None Preferred timing Yes Native preferred timing 1280x720p at 60Hz 16 9 Modeline 1280x720 74 250 1280 1390 1430 1650 720 725 730 750 hsync vsync Detailed timing 1 720x480p at 60Hz 16 9 Modeline 720x480 27 000 720 736 798 858 480 489 495 525 hsync vsync Standard timings supported 720 x 400p at 70Hz IBM VGA 640 x 480p at 60Hz IBM VGA 640 x 480p at 67Hz Apple Mac II 640 x 480p at 72Hz VESA 640 x 480p at 75Hz VESA 800 x 600p at 56Hz VESA 800 x 600p at 60Hz VESA 800 x 600p at 72Hz VESA 800 x 600p at 75Hz VESA 832 x 624p at 75Hz Apple Mac II 1024 x 768p at 60Hz VESA 1024 x 768p at 70Hz VESA 1024 x 768p at 75Hz VESA 1280 x 1024p at 75Hz VESA 1600 x 1200p at 60Hz VESA STD 12802. RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY Some countries districts or states do not allow the exclusion or limitation of relief special incidental consequential or indirect damages or the limitation of liability to specified amounts so the above limitations or exclusions may not apply to you Exclusive Remedy TO THE MAXIMUM EXTENT PERMITTED BY LAW THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A CONSUMER PRODUCT UNDER THE MAGNUSON MOSS WARRANTY ACT 15 U S C A 2301 ET SEQ OR OTHER APPICABLE LAW THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU AND ALL IMPLIED WARRANTIES ON THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE SHALL APPLY AS PROVIDED UNDER A
3. after the IN LED stops flashing i e 6 Technical Specifications INPUTS 1 DVI D on a DVI I connector 1 2Vpp on a Molex 24 pin female connector DDC signal 5Vpp TTL 1 S PDIF on an RCA connector stereo audio and not 5 1 channel audio 1 unbalanced stereo audio on a 3 5mm mini jack 1 5Vpp max 1 TOSLINK optical connector OUTPUT HDMI connector MAX DATA RATE 4 95Gbps 1 65Gbps per graphics channel UXGA 1080p COMPLIANCE WITH HDMI STANDARD Supports DVI 1 0 HDMI and HDCP 1 1 and downward compatible with HDCP 1 0 TOSLINK SAMPLE RATE 44 1kHz and 48kHz CONTROLS EDID button INDICATOR LED ON IN OUT POWER SOURCE 12V DC 400mA OPERATING TEMPERATURE 0 to 40 C 32 to 104 F STORAGE TEMPERATURE 40 to 70 C 40 to 158 F HUMIDITY 10 to 90 RHL non condensing DIMENSIONS 12cm x 7 2cm x 2 4cm 4 73 x 2 83 0 95 W D H WEIGHT 0 3kg 0 6lbs approx ACCESSORIES Power supply bracket installation kit OPTIONS RK 3T 19 rack adapter Specifications are subject to change without notice chnical Specifications 7 Default EDID Monitor 2 Real time 0x0031 Model name FC 49 Manufacturer KRM Plug and Play ID KRMO0000 Serial number 1 Manufacture date Filter driver 2006 ISO week 12 None ats Digital DVI Undefined RGB color Color bit depth
4. x 960p at 85Hz VESA STD 1360 x 765p at 85Hz VESA STD 1024 x 768p at 85Hz VESA STD 800 x 600p at 85Hz VESA STD 640 x 480p at 85Hz VESA STD EIA CEA 861 Information Revision number IT underscan Supported Basic audio Supported YCbCr 4 4 4 n YCbCr 4 2 2 N FC 49 Default EDID si 720x480p at 60Hz 4 3 720x480 27 000 720 736 798 858 480 489 495 525 hsync vsync 1920x1080i at 60Hz 16 9 920x1080 74 250 1920 2008 2052 2200 1080 1084 1094 1124 interlace hsync Native formats Detailed timing 1 Modeline Detailed timing 2 Modeline vsync CE video identifiers VICs timing formats supported 640 x 480p at 60Hz Default 4 3 1 1 720 x 480p at 60Hz EDTV 4 3 8 9 720 x 480p at 60Hz EDTV 16 9 32 27 1280 x 720p at 60Hz HDTV 16 9 1 1 Native 1920 x 1080i at 60Hz HDTV 16 9 1 1 NB NTSC refresh rate Hz 1000 1001 CE audio data formats supported LPCM 2 channel 16 20 24 bit depths at 32 44 48 kHz CE speaker allocation data Channel configuration 2 0 Front left righ Front LFE Front cente Rear left righ Rear center Front left right center No Rear left right center No Rear LFE rsisi No O E vendor specific data VSDB EEE registration number 0x000C03 CEC physical address 1 0 0 0 Maximum TMDS clock 165MHz Report information Date generated Software revision 2 60 0 964 Data source Real t
5. C 49 DVI Audio to HDMI Converter 5 Acquiring an EDID 6 Technical Specifications 7 Default EDID Figures Figure 1 FC 49 DVI Audio to HDMI Converter Figure 2 Connecting the FC 49 DVI Audio to HDMI Converter OMAN DOF WNHNDND Introduction Welcome to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unique creative and affordable solutions to the vast range of problems that confront the video audio presentation and broadcasting professional on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better Our 1 000 plus different models now appear in 11 groups that are clearly defined by function GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Matrix Switchers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Products GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters and GROUP 11 Sierra Products Congratulations on purchasing your Kramer TOOLS FC 49 DVI Audio to HDMI Converter which is ideal for e Home theater presentation and multimedia applications e Rental and staging 2 1 2 2 Getting Started We recommend that you e Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the conte
6. KRAMER ELECTRONICS LTD USER MANUAL MODEL FCc 49 DVI Audio to HDMI Converter P N 2900 000286 Rev 6 This guide helps you install and use your product for the first time For more detailed information go to http Awww kramerelectronics com support product_downloads asp to download the latest manual or scan the QR code on the left Step 1 Check what s in the box The FC 49 DVI Audio to HDMI Converter A 4 Rubber feet Power adapter A 1 Quick Start Guide A Mounting brackets Step 2 Install the FC 49 Mount the machine in a rack or place on a table Step 3 Connect inputs and output Multimedia Player DVI Audio AUDIO INPUTS o RIO Os ANALOG OPTICAL S PDIF 12V DC HDMI Our Our IN ON EDID CAPTURE 9 O O Step 4 Connect the power r Connect the 12V DC power adapter to the FC 49 and plug the adapter into the mains electricity Step 5 Acquire the EDID 1 Connect the power supply 2 Connect the new output display or keep disconnected to acquire the default EDID 3 Press and hold the EDID CAPTURE button until the green IN LED starts blinking and then release the button The EDID is acquired after the LED stops flashing Contents 1 Introduction 2 Getting Started 2 1 Achieving the Best Performance 2 2 Safety Instructions 2 3 Recycling Kramer Products 3 Overview 3 1 Defining the FC 49 DVI Audio to HDMI Converter 4 Connecting the F
7. PPLICABLE LAW Other Conditions This limited warranty gives you specific legal rights and you may have other rights which vary from country to country or state to state This limited warranty is void if i the label bearing the serial number of this product has been removed or defaced ii the product is not distributed by Kramer Electronics or iii this product is not purchased from an authorized Kramer Electronics reseller If you are unsure whether a reseller is an authorized Kramer Electronics reseller please visit our Web site at www kramerelectronics com or contact a Kramer Electronics office from the list at the end of this document Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form Kramer Electronics thanks you for purchasing a Kramer Electronics product We hope it will give you years of satisfaction For the latest information on our products and a list of Kramer distributors visit our Web site where updates to this user manual may be found We welcome your questions comments and feedback Web site www kramerelectronics com KRAMER E mail info kramerel com SAFETY WARNING Disconnect the unit from the power e supply before opening and servicing P N 2900 000286 Rev 6
8. cific installation of this product How to Obtain a Remedy under this Limited Warranty To obtain a remedy under this limited warranty you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you For a list of authorized Kramer Electronics resellers and or Kramer Electronics authorized service providers please visit our web site at www kramerelectronics com or contact the Kramer Electronics office nearest you In order to pursue any remedy under this limited warranty you must possess an original dated receipt as proof of purchase from an authorized Kramer Electronics reseller If this product is returned under this limited warranty a return authorization number obtained from Kramer Electronics will be required You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product If it is decided that this product should be returned directly to Kramer Electronics this product should be properly packed preferably in the original carton for shipping Cartons not bearing a return authorization number will be refused Limitation on Liability THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES
9. cycled To comply with the WEEE Directive Kramer Electronics has made arrangements with the European Advanced Recycling Network EARN and will cover any costs of treatment recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility For details of Kramer s recycling arrangements in your particular country go to our recycling pages at http www kramerelectronics com support recycling FC 49 Getting Started 3 Overview The Kramer FC 49 DVI Audio to HDMI Converter is a high quality format converter and embedder for DVI and audio signals It converts a DVI signal and embeds an unbalanced stereo S PDIF or TOSLINK audio signal to an HDMI output The FC 49 DVI Audio to HDMI Converter features A maximum data rate up to 4 95Gbps 1 65Gbps per graphics channel HDCP compliance HDTV compatibility Auto Format Detection for digital RGB or YPbPr A DVI D input signal on a DVI I connector EDIDPro Kramer Intelligent EDID Processing Intelligent EDID handling and processing algorithm ensures Plug and Play operation for HDMI systems In addition the FC 49 DVI Audio to HDMI Converter Adds HDMI output capability to your DVI source so that for example an HDMI television can be used with your DVI source For example the DVI source can also be the DVI graphics output of a PC as well as its audio signal with sound Includes automatic audio input detection If a digital i
10. g power surges or other acts of nature This limited warranty does not cover any damage deterioration or malfunction resulting from the installation or removal of this product from any installation any unauthorized tampering with this product any repairs attempted by anyone unauthorized by Kramer Electronics to make such repairs or any other cause which does not relate directly to a defect in materials and or workmanship of this product This limited warranty does not cover cartons equipment enclosures cables or accessories used in conjunction with this product Without limiting any other exclusion herein Kramer Electronics does not warrant that the product covered hereby including without limitation the technology and or integrated circuit s included in the product will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used How Long Does this Coverage Last Seven years as of this printing please check our Web site for the most current and accurate warranty information Whois Covered Only the original purchaser of this product is covered under this limited warranty This limited warranty is not transferable to subsequent purchasers or owners of this product What Kramer Electronics will do Kramer Electronics will at its sole option provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim
11. ime 0x0031 Operating system 5 1 2600 2 Service Pack 3 29 05 2012 Raw data 00 FF FF FF FF FF FF 00 2E 4D 00 00 01 00 00 00 0C 10 01 03 81 46 27 78 0B D5 7C A3 57 49 9C 25 11 48 4B BF EF 00 A9 40 81 59 8B D9 61 59 45 59 31 59 01 01 01 01 01 1D 00 72 51 D0 1E 20 6E 28 55 00 C4 8E 21 00 00 1E 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 C4 8E 21 00 00 18 00 00 00 FC 00 46 43 2D 34 39 0A 20 20 20 20 20 20 20 00 00 00 FD 00 37 55 1E 5B 10 00 0A 20 20 20 20 20 20 01 58 02 03 18 C1 45 01 02 03 84 05 23 09 07 07 83 01 00 00 65 03 0C 00 10 00 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 13 8E 21 00 00 18 01 1D 80 18 71 1C 16 20 58 2C 25 00 C4 8E 21 00 00 9E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EE FC 49 Default EDID LIMITED WARRANTY The warranty obligations of Kramer Electronics for this product are limited to the terms set forth below Whatis Covered This limited warranty covers defects in materials and workmanship in this product What is Not Covered This limited warranty does not cover any damage deterioration or malfunction resulting from any alteration modification improper or unreasonable use or maintenance misuse abuse accident neglect exposure to excess moisture fire improper packing and shipping such claims must be presented to the carrier lightnin
12. nalog input Note that S PDIF and TOSLINK inputs cannot be connected simultaneously Overview i 5 4 Connecting the FC 49 DVI Audio to HDMI Converter Always switch off the power to each device before connecting it to your FC 49 After connecting your FC 49 connect its power and then switch on the power to each device To connect the FC 49 as illustrated in the example in Figure 2 do the following 1 Connect the HDMI OUT connector to the HDMI acceptor for example an LCD TV with built in speakers 2 Connect the DVI source for example a multimedia player or a PC to the DVI IN connector S PDIF digital audio RCA IN connector or you can connect the audio source to the ANALOG or OPTICAL audio connector Note S PDIF in the FC 49 supports stereo audio and not 5 1 channel audio 3 Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity not illustrated in Figure 2 Multimedia LCDTV with Player Built in Speakers Figure 2 Connecting the FC 49 DVI Audio to HDMI Converter ia FC 49 Connecting the FC 49 DVI Audio to HDMI Converter 5 Acquiring an EDID To acquire a new EDID do the following 1 Connect the power supply 2 Connect the new output display or keep it disconnected to acquire the default EDID 3 Press and hold the EDID CAPTURE button until the green IN LED starts flashing and then release the button The EDID is acquired
13. nput S PDIF or TOSLINK is detected the FC 49 selects the digital input If no digital input is detected the machine selects the analog input Note that S PDIF and TOSLINK inputs may not be connected simultaneously Supports a TOSLINK sample rate of 44 1kKHz and 48kHz Is housed in a Kramer TOOLS enclosure Three units can be rack mounted side by side in a 1U rack space with the optional RK 3T rack adapter 3 1 FC 49 Defining the FC 49 DVI Audio to HDMI Converter AUDIO KIO Oo KRAMER TOOLS EEn ANALOG OPTICAL 7 12V DC DVI Audio To HDMI Converter ON EDID Figure 1 FC 49 DVI Audio to HDMI Converter Feature Function E 12V DC l DC connector for powering the unit 2 AUDIO S PDIF RCA Connector Connects to the digital audio source INPUTS OPTICAL TosLink Connects to the digital audio source Connector ANALOG 3 5mm Mini Connects to the analog audio source Jack H DVI IN Connector e E to the DVI source 6 HDMI OUT Connector Connects to the HDMI Connects to the HDMI acceptor OUT LED llluminates to indicate that a display is connected 8 i llluminates to indicate a signal at the input 9 Illuminates when receiving power EDID CAPTURE Button Press and hold to acquire EDID The audio inputs are automatically detected if a digital input S PDIF or i TOSLINK is detected the machine selects the digital input If no digital input is detected the machine selects the a
14. nts of this user manual Go to http www kramerelectronics com support product_downloads as to check for up to date user manuals application programs and to check if firmware upgrades are available where appropriate Achieving the Best Performance To achieve the best performance e Use only good quality connection cables we recommend Kramer high performance high resolution cables to avoid interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low quality cables e Do not secure the cables in tight bundles or roll the slack into tight coils e Avoid interference from neighboring electrical appliances that may adversely influence signal quality e Position your Kramer FC 49 away from moisture excessive sunlight and dust This equipment is to be used only inside a building It may only be connected to other equipment that is installed inside a building Safety Instructions Caution There are no operator serviceable parts inside the unit Warning Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning Disconnect the power and unplug the unit from the wall before installing FC 49 Getting Started 2 3 Recycling Kramer Products The Waste Electrical and Electronic Equipment WEEE Directive 2002 96 EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and re
15. under this limited warranty 1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of time free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition Kramer Electronics will also pay the shipping costs necessary to return this product once the repair is complete 2 Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product 3 Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty What Kramer Electronics will not do Under This Limited Warranty If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to repair Kramer Electronics products this product must be insured during shipment with the insurance and shipping charges prepaid by you If this product is returned uninsured you assume all risks of loss or damage during shipment Kramer Electronics will not be responsible for any costs related to the removal or re installation of this product from or into any installation Kramer Electronics will not be responsible for any costs related to any setting up this product any adjustment of user controls or any programming required for a spe
Download Pdf Manuals
Related Search