Kompernass Low Voltage Halogen Spotlight KH 4098 Operating Instructions
Contents
1. KH4098 IB EN gxd 16 10 2006 16 09 Uhr Seite 1 p Low Voltage Halogen Spotlight KH 4098 Cleaning Operating instructions Wipe the appliance with a damp cloth Do not use aggressive or chemical cleaning agents These would result in damage to the appliance Disposal JE under no conditions should the appliance be disposed of with E normal household waste Dispose of the appliance through an approved disposal centre or at your community waste facility Observe the currently applicable regula tions In case of doubt please contact your waste disposal centre Service DES Ltd Units 14 15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel 0870 787 6177 Fax 0870 787 6168 e mail support uk kompernass com Kompernass Service Ireland c o Irish Connection 41 Harbour view Howth Co Dublin Tel 087 99 62 077 Fax 18398056 e mail support ie kompernass com KompernaB GmbH Burgstr 21 D 44867 Bochum www kompernass com ID no KH4098 10 06 V3 KH4098 IB EN qxd 16 10 2006 16 09 Uhr Safety instructions A Danger of injury e Connect the appliance only to correctly installed mains power sockets with a supply voltage of 230 V at 50 Hz e Inthe event of operational malfunction and for cleaning always remove the power plug from the wall socket e Always remove the power cable from the socket by pulling on the plug not on the power cable itself e Do not crease or crimp the power cab2. cs 3x red yellow green and blue Power transformer Operating instructions Technical data Mains voltage 230 V 50Hz Light bulb 12 V 10 W Type MR11 Power transformer Spraywater protected Protection class II 2 Plug of the protection type IP44 Lamps of the protection type IP68 Description of the appliance Colour discs Power plug Power cable Transformer Connecting plug Coupling nut Cable Underwater lamp Lamp cover Outer race 519191519199100 Commissioning Assembly 1 Insert the connecting plug into the transformer 2 Slide the coupling nut onto the connecting plug and screw it tight Placing the coloured disc 1 Lay the slot of the coloured disc on one of the two securing hooks of the underwater lamp 2 Carefully press the coloured disc down on the opposite side until it audibly engages 3 If you wish to exchange the coloured disc C lightly press a securing hook outwards and at the same time press the coloured disc to the side Placing the underwater lamps Ensure that a mains power socket is in the close vicinity gt Place the underwater lamps 8 as desi red The underwater lamps 8 can be opera ted both in and out of water gt Align the underwater lamps 8 with the assistance of the 5 stage pivoting device 5 gt Insert the power plug into a wall power socket In permanent installations we recommend that the transformer is fast
3. ened down with the fixing holes Changing bulbs 1 Turn the outer race 0 of the underwa ter lamp in the direction of the arrow anti clockwise You can now remove the outer race 0 2 Remove the transparent lamp cover ing 3 Pull the halogen lamp complete with the housing upwards 4 Holding the housing firmly carefully pull the halogen lamp complete with reflector out of the housing 5 Insert the new halogen lamp into the housing and then press both of them back down again NOTE Ensure that the sealing ring is not displaced 6 Lay the lamp cover onto the under water lamp 7 Place the outer race 40 on the under water lamp 8 such that the tenons fit into the rebates of the outer race 0 Turn the outer race 0 in a clockwise direction until tight
4. le and lay it in such a way as to prevent anyone from stepping on or tripping over it e Should the power cable or the appliance become damaged you must have them repaired by qualified specialists before using them again e Always keep the appliance beyond the reach of children Do not allow children to use it e The appliance may not be operated in or next to swimming pools Risk of injury Attention e Always remove the plug from the wall socket before removing the halogen lamps e Allow the halogen lamps to cool down before removing them The halogen lamps will become very hot There is a danger of being burnt e Do not use extension cables e The maximum submersing depth for the underwater lamps amounts to 0 5m Do not submerse them any deeper The appliance would be irreparably damaged Seite 2 e Take steps to ensure that the transfor mer cannot fall into the pond or water container The appliance would be irreparably damaged e The flexible power cable of the trans former cannot be exchanged Should the power cable be damaged the transformer must be exchanged as a complete unit e In exterior areas only use power sockets of the protection class IPX4 Intended use The low voltage Halogen spotlight is intended for the illumination of gardens or garden ponds It is intended exclusively for private usage not for commercial purposes Items supplied 3 Halogen spotlights Cable 12 Colour dis
Download Pdf Manuals
Related Search