Kompernass KH4077-11/07-V1 User's Manual
Contents
1. injuries do not touch these surfaces Arrange for a defective glass cover to be imme diately replaced by a suitable new one Never direct the halogen floodlights towards each other The appliance could be damaged by the large generation of heat Always ensure that the Stand Halogen Flood light is sufficiently distant from yourself and easi ly meltable items To avoid eye damage do not look directly into the Stand Halogen Floodlight Never place the Stand Halogen Floodlight in the close proximity of easily inflammable materials Use exclusively halogen lamps up to 500 Watt Never touch the lightbulb with bare hands Always use a dry lintfree cloth Read and observe all safety and operating instructions Ensure that the Stand Halogen Floodlight has cooled down before storing it away Description of the appliance ON OFF Switch Floodlight lever Halogen floodlight Protective grill Knurled screw Crossbeam Telescopic stand Power cable Knurled screw Fixing ring Distributor box Knurled screw Fixing screw Glass cover 8898989900006 Assembly Danger of electrical shock Never insert the plug into an electrical socket until the appliance has been completely assembled Danger of burns Only touch the halogen lamps when they are in a switched off and cooled down condition The halo gen lamps will get very hot Never touch the light bulb with bare hands always use a clean and dry lintfree cloth O2. 6 55 GMBH BURGSTRASSE 21 D 44867 BOCHUM www kompernass com ID Nr KH4077 11 07 V1 HALOGEN WORK SPOTLIGHTS A gt HALOGEN WORK SPOTLIGHTS Operating instructions 4077 Safety instructions Description of the appliance Assembly Removing the halogen lamps Inserting the halogen lamps Cleaning Troubleshooting Disposal Technical data Service Importer PAGE N B Go Go Read these operating instructions carefully before using the appliance for the first time and preserve this maual for later reference Pass this manual on to whoever might acquire the appliance at a future date 1 HALOGEN WORK SPOTLIGHTS Safety instructions Danger of electrical shock e Only connect the Stand Halogen Floodlight to correctly installed wall sockets having a mains current of 220 240 V at 50 Hz Unplug the Stand Halogen Floodlight from the socket if you notice any faulty operation and when you decide to clean it Under no circumstances may the Stand Halogen Floodlight be immersed in liquids or liquids be permitted to permeate into the housing Should liquids nonetheless gain entry into the appliance housing immediately unplug the ap pliance from the mains supply and arrange for it to be repaired by qualified specialists Never touch the Stand Halogen Floodlight power cable or plug with wet hands To unp
3. dry cloth Place a ceramic end on the appropriate retainer 3 Place the other ceramic end on the opposite retainer Ensure that contact has been made on both sides The retainers should now hold the halogen lamp securely such that the halogen lamp can no longer move itself 4 Now close the glass cover and replace and retighten the middle screw 5 Switch the Floor Halogen Floodlight on with the ON OFF switch 6 Should it not function repeat steps 1 5 Cleaning Danger of electrical shock Always remove the plug from the socket before cle aning the Stand Halogen Floodlight Under no circumstances may the appliance be immersed in water or held under running water during cleaning Clean the exterior of the Stand Halogen Floodlight with a moist cloth Attention Ensure the Floor Halogen Floodlight is inaccessible for children Troubleshooting Symptom The Stand Halogen Floodlight will not switch on Possible cause and remedy Check if the Stand Halogen Lamp has been correct ly assembled or if it is possibly damaged Replace the halogen lamps if necessary A domestic electrical fuse is defect Check the domestic fuses and if necessary renew them The power socket is defective Try another wall socket The Floor Halogen Floodlight is possibly defect Check the connecting lead and the power plug for damages Have the Floor Halogen Floodlight chek ked over by specialists Disposal Do not dispos
4. e of the appliance in your normal domestic waste Dispose of the appliance through an approved dis posal centre or at your community waste facility Observe the currently applicable regulations In case of doubt please contact your waste disposal centre ES Dispose of all packaging materials in an environmentally responsible manner Technical data Mains voltage 220 240 V 50 Hz 2 x 500 Watt Protection rating 1P44 Rated output Service DES Ltd Units 14 15 Bilston Industrial Estate Oxford Street Bilston WV147EG Tel 0870 787 6177 Fax 0870 787 6168 e mail support uk kompernass com GE Irish Connection Harbour view Howth Co Dublin Tel 00353 0 87 99 62 077 Fax 00353 18398056 e mail support ie kompernass com Importer KOMPERNASS GMBH BURGSTRASSE 21 D 44867 BOCHUM www kompernass com
5. lug the appliance always pull the plug from the socket do not pull the cord itself e Do not crease or crimp the power cable and place it in such a way as to prevent anyone from stepping on or tripping over it To avoid the risk of injury arrange for defective power plugs and or cables to be replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury Separate your Stand Halogen Floodlight from the mains supply immediately after use The appliance is only completely switched off after having been unplugged Danger of injuries If they have not previously been supervised or in structed in its correct usage do not allow indivi duals including children to use the appliance whose physical sensorial or mental abilities or lack of experience and knowledge hinder their safe usage of it if they have not previously been supervised or instructed in its correct usage Inform children about the appliance and its potential dangers and that they should not play with it Attention Always remove the plug from electrical sockets before exchanging the halogen lamps Allow the halogen lamps to cool before removing them Switch the Stand Halogen Floodlight off only with the ON OFF switch Never touch the glass covering the power cable or the metal housing whilst it is in operation These parts of the appliance will become very hot during use To avoid burn
6. ning it in an anti clockwise direction gt Adjust the telescopic stand to the desired height gt Retighten the fixing ring by turning it in a clok kwise direction Important adjust halogen floodlight use knurled screw the fixing screw and the floodlight lever The horizontal position is adjusted in that the knur led screw is loosened and with the assistance of the floodlight lever it is placed in the desired position Retighten the knurled screw when the optimal position has been found The vertical position is adjusted in that the fixing screw is loosened and and with the assistance of the floodlight lever it is placed in the desired position Retighten the fixing screw when the optimal position has been found Important During the adjustments always hold the floodlight lever firmly Important Do not use extension cables that are longer than 15 m Removing the halogen lamps 1 Switch the appliance off with the ON OFF switch remove the plug from the socket and allow the Floor Halogen Floodlight to cool down 2 Remove the middle screw on the top of the lamp housing Loosen the glass cover 3 Use a dry cloth to take out the halogen lamp 4 Remove the halogen lamp Inserting the halogen lamps 1 Ensure that the Floor Halogen Floodlight is switched off and completely cooled down 2 Take the new halogen lamp from its packaging with a
7. pening up the pedestal base gt To set up the telescopic stand 6 loosen the knurled screw The pedestal base can now be opened out to the floor gt Turn the knurled screw until it is tight Assemble the protective grill on to the halogen spotlights gt Insert the lower pegs of the protective grill into the recesses on the corners before the glass covering gt Squeeze the protective grill so far together that the pegs on the other side of the protective grill can be inserted into the recesses there gt Do the same with the second halogen spotlight Mounting the halogen floodlights on the crossbeam gt Insert the knurled screw with the washer through the hole in the bracket of the halogen floodlight gt Insert the halogen floodlight with the knurled screw in the pre drilled hole on the crossbe am Ensure that the Stoppers are located be hind the halogen floodlights gt Turn the knurled screw until it is tight Assembling the crossbeam on the telescopic stand gt Insert the knurled screw first of all through the hole in the distributer box then through the hole in the crossbeam gt Now assemble the crossbeam and the distri butor box with the assistance of the knurled screw on the telescopic stand gt Turn the knurled screw until it is tight Adjusting the height of the Stand Halogen Floodlight gt Loosen the fixing ring by tur
Download Pdf Manuals
Related Search