KitchenAid KSRC25FV User's Manual
Contents
1. he a include rollers extended 3 4 ande 1 9 cm Depth Cab Width Door Width Cab Height Overall Height Model g g u p g KSRC25FV 31 3 8 35 1 2 35 7 8 68 7 8 69 3 8 79 69 cm 90 17 cm 91 12 cm 174 94 cm 176 21 cm KSRG25FV 31 3 8 35 1 2 35 7 8 68 7 8 69 3 8 79 69 cm 90 17 cm 91 12 cm 174 94 cm 176 21 cm LOCATION REQUIREMENTS L 1 2 1 25 cm a IE 2 5 08 cm To ensure proper ventilation for your refrigerator allow for 1 2 1 25 cm space on each side and at the top When installing your refrigerator next to a fixed wall leave 2 5 08 cm minimum on each side depending on your model to allow for the door to swing open If your refrigerator has an ice maker allow extra space at the back for the water line connections NOTE Do not install the refrigerator near an oven radiator or other heat source nor in a location where the temperature will fall below 55 F 13 C Because Whirlpool Corporation policy includes a continuous commitment to improve our products we reserve the right to change materials and specifications without notice Dimensions are for planning purposes only For complete details see Installation Instructions packed with product Specifications subject to change without notice Ref W10162446 08 05 082. KitchenAid HOME APPLIANCES PRODUCT MODEL NUMBERS KSRC25FV KSRG25FV Electrical A 115 Volt 60 Hz AC only 15 or 20 amp fused grounded electrical supply is required It is recommended that a separate circuit serving only your refrigerator be provided Use an outlet that cannot be turned off by a switch Do not use an extension cord NOTE Before performing any type of installation Cleaning or removing a light bulb turn the control Thermostat Refrigerator or Freezer control depending on the model to OFF and then disconnect the refrigerator from the electrical source When you are finished reconnect the refrigerator to the electrical source and reset the control Thermostat Refrigerator or Freezer control depending on the model to the desired setting Water A cold water supply with water pressure between 30 and 120 psi 207 and 827 kPa is required for the water dispenser and ice maker Important The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi 207 and 827 kPa If a reverse osmosis water filtration system is connected to your cold water supply the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi 276 to 414 kPa PRODUCT DIMENSIONS Side by Side Refrigerator A A E D overall top of cabinet tinel Dimensions D and E
Download Pdf Manuals
Related Search