Home
Kinyo R-565 User's Manual
Contents
1. KINYO 5 1 HOME THEATER SPEAKER SYSTEM User s Guide PACKAGE CONTENTS RB 6A Control Unit Remote Controller DR 30A Subwoofer Speaker SW 6000 Satellite Speaker RS 25 Speaker Racks J 22 User s Guide RCA Plug 2CH RCA To Mini plug RCA Plug 6CH G9 Din To 6 RCA DC Power Cable Battery UM 4 5 1 Home Theater Speakers LOCATION OF CONTROLS CONTROLS REFER TO ABOVE NUMBER MODEL NO 1 2 3 4 5 6 SUBWOOFER LED MASTER REMOTE R 565 POWER CONTROLLER POWER INDICATOR VOLUME IR RECEIVE SYSTEM CONNECTION CENTER SPEAKER A CONNECTING SUBWOOFER TO SATELLITE SPEAKERS 1 Connect RCA jacks of the right rear surround speaker to the right rear surround channel socket of the subwoofer 2 Connect RCA jacks of the right speaker to the right channel RCA socket of the subwoofer 3 Connect RCA jacks of the left rear surround speaker to the left rear surround channel socket of the subwoofer 4 Connect RCA jacks of the left speaker to the left channel RCA socket of the subwoofer 5 Connect RCA jacks of the center speaker to the center channel RCA socket of the subwoofer CONNECTING SUBWOOFER TO CONTROL UNIT Plug one end of the G9 cable into the G9 socket at the back of the SUBWOOFER and the other end into the RCA socket at the back of the CONTROL UNIT as indicated on the diagram CONNECTING AUDIO SIGNAL TO
2. CONTROL UNIT 1 Use the G9 cable for audio signal input Connect one end of the G9 cable to the audio source and the other end to the control unit 2 Use the RCA cable to input analog stereo audio signals c D CONNECTING POWER TO THE SYSTEM 1 Use the DC power supply cable to connect the subwoofer s DC power out put to the DC power input of the control unit The power source specifications requirement of the control unit is DC 12V 500mA 2 Connect the subwoofer s AC plug to the electrical wall outlet directly Depending on the environment satellite speakers center left right rear left and rear right can be placed on the wall or de Please try a variety of positions unit the best possible sound effect is achieved Also space limitations may make it neces to piace them vertically or horizontally and ine speaker grii covers can be dismantled and reinstalled with ease when the speakers are positioned 1 2 3 RB 6A CONTROL UNIT FUNCTIONS FRONT PANEL 6 CH INPUT 2 CH INPUT MUIING POWER SURROUND I Tuoi EFFECT CpNTROL CENTER STANDBY MASTER VOL POWER Use the button to operate power on off MUTE LED INDICATOR This LED will flash when in mute mode and the LED light will be turned off when not in mute mode SURROUND LED INDICATOR This LED will light up when in 2CH input mode This function does not operate upon 6CH input MASTE
3. key when SURROUND is on the volume level on the center front left front right channel will increase and the volume level on the rear left and rear right SURROUND channel will decrease When the SURROUND mode is off press this button the volume level on center front left and front right channel will increase and the volume will be turned off on rear left and rear right SURROUND channel BUTTON In the 6CH mode press this key and the volume level on the front left and rear left SURROUND channel will increase The volume on the front right and rear right SURROUND channel will decrease and the center channel will not be affected In the 2CH mode press this key when SURROUND is on the volume on the front left and rear left channel will in increase the front right channel and rear right SURROUND channel will decrease Press this key when SURROUND is off and the volume on the front left channel will increase and the front right channel wil decrease The rear left and rear right SURROUND channel will have no output BUTTON the GCH mode press this key and the volume on the front left channel and the rear left SURROUND channel will decrease The front right channel and the rear right SURROUND channel will increase The center channel will not be affected In the 2CH mode press this key when SURROUND is on the volume on the front right channel and the rear right SURROUND channel will increase and volume on the front lef
4. R VOL Press this key to increase master volume level MASTER VOL Press this key to decrease master volume level 2 CH INPUT LED INDICATOR his LED indicates the system is in 2 channelinput mode 6 CH INPUT LED INDICATOR This LED indicates the system is in 6 channel input mode STANDBY LED INDICATOR This LED indicates the system is in standby mode When making functional adjustments the LED will fash This LED will ight up when the volume is adjusted to either maximum or minimum indicating the volume level cannot be further increased or decreased REMOTE CONTROL FUNCTIONS RESET POWER MUTE F INPUT SURROUND L R SUBWOOFER VOLUME CENTER POWER Press this key to operate power on off RESET 1 the 6CH mode press this and the volume in each audio channel will return to its default value In the 2CH mode press this key and it will erase the SURROUND effect and return to its default value MUTE Press this key to turn mute on and off SURROUND Before operating this function make sure the system is in the 2 mode Otherwise it will not function when the key is pressed INPUT Press this key for 6 2CH switch over F BUTTON in the 6CH mode press this key and the volume level on center front left and front right channel will increase and volume level on the rear left and rear right SURROUND channel will decrease B BUTTON In the 2CH mode press this
5. me Theater Speaker Front satellite speaker and surround speaker and central speaker Standard output power of each SW sound box RS 25 satellite speaker 3 Full Range speaker 80Hz 20KHz response frequency Impedance 4 ohm External dimensions W 162x 90x D 140mm 6 512 inch Subwoofer 61 2 subwoofer standard output power 40W RMS 40Hz 120Hz Impedance 4 ohm LED gt power switch SW 6000 external dimensions W 190 356 325 712 14x 12sainch
6. t channel and the rear left SURROUND channel will decrease Press this key when SURROUND is off the volume on the front right channel will increase and the front left channel will decrease and the rear left and rear right SURROUND channel will have no output Press this key to increase the subwoofer volume level SUBWOOFER Press this key to decrease the subwoofer volume level Press this key to increase the center volume level CENTER Press this key to decrease the center volume level MASTER VOL Press this key to increase the master volume level MASTER VOL Press this key to decrease the master volume level ACCEPTABLE RANGE OF REMOTE CONTROLLER RB 6A CONTROL UNIT CONNECTIONS REAR PANEL 1 6 CHANNEL OUTPUT 2 LEFT RIGHT CHANNEL STEREO EFFECT ANALOG INPUT 3 6 CHANNEL INPUT 4 DC 12V POWER INPUT PROBLEMS AND SOLUTIONS This appendix describes basic troubleshooting to help you solving problems you might have with the 5 1 Home theater Speaker System Care and cleaning information as well as Technical Support information are also provided This section lists common questions and answers to installation and connection problems you may experience with the 5 1 Home Theater speaker System if applying these methods does not solve the problem contact Technical Support for further assistance rer Sap E p emm Sse pa a ou nm a m Vion co
7. w on 5 acids mem em rebar cone hc ee rg reo Excessive Speaker out of circuit Check speaker Highs or lows Note 1 The amplifier is assumed to work properly 2 When the unit is not in use make sure to turn the power off on both the RB 6A control unit and the subwoofer unit It is a normal condition to have low humming noise from the subwoofer if the power is left on WARNING REDUCE THE RISK DF FIRE OR ELECTRIC SHOCK 00 NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK CAUTION DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE PILOT LAMP SOLDERED IN PLACE TO REDUCE THE RISK OF REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ELECTRIC SHOCK REFER TO QUALIFIED SERVICE PERSONNEL i Attention consult instruction manual for Attention presence of dangerous voltage important operating and maintenance servicing located within enclosure instructions the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus SPECIFICATIONS Control unit RB 6A Audio Input Analog Stereo RCA X 2 LED Display e Power Volume Volume Controls Remote Control Receiver 2 Output RCA L R LS RS C Subwoofer Channels Dimensions W183 X H60 X D132mm 7 14 X 2 14 X 5 1 4 inch Remote Controller DR 30A 55 1 Ho
Download Pdf Manuals
Related Search
Related Contents
Notes on AD Model Builder by a novice Filemaker Upgrade to Pro v8.5 gann hydromette compact b Data Assistant - Electric Motor Service Industry User Manual Benq DC 3400 INSTRUCTION MANUAL WT 280 ultraprobe-15000-pdf ebode IR Link Pro Flush Copyright © All rights reserved.
Failed to retrieve file