Home

Kenwood KRF-9300D User's Manual

Contents

1. Z A AUDIO OUT VIDEO OUT S VIDEO OUT COMPONENT COAXIAL DIGITAL Analog VIDEO OUT OUT AUDIO A O 000 DVD player E Disable the HDMI input if making the connection above See lt HDMI input setup HDMI Input gt 49 When the connected DVD player and or TV monitor have the HDMI terminals it is recommended to use the HDMI connection See lt Connecting components equipped with HDMI terminals gt 15 2 0 KRF V9300D KRF V8300D KRF V7300D Connecting a DVD player with multi channel audio output terminal HHE ad FRONTOUT SURROUND SUBWOOFEROUT CENTER OUT OUT EJ Disable the HDMI input if making the connection above See lt HDMI input setup HDMI Input gt 49 For the VIDEO line connection see lt Connecting a DVD player gt 20 SUO1 53UUO ini English 21 Connections 2 Connect the video line Connection B C or D 3 Connect the TV monitor mi Connect as shown in lt Connecting a TV Monitor gt 16 Connecting the video player component 1 Connect the audio line Connection A digital or E analog o OPTICAL OPTICAL CD ASSIGNABLE _VIDEO2 000 000
2. 57 Receiving preset stations Receiving preset stations in order P CALL 58 Tuning by program type PTY search 58 Using the DISPLAY key scscscscsssscsescsceceseee 59 Recording Recording mode setting in digital audio source FOCOFCING scescccscecsscccscsssccscssescscscesesescecesees Recording audio analog sources Recording video scccccscscscsssscscsccsesescscesesese Sound adjustment Adjusting the sound scscscsssscscssecescsceceseee 61 ACTIVE EQ mode Adjusting the Tone Bass Boost Adjustments according to the playing source 62 Speaker level adjustment Input level adjustment Panorama mode Dimension Center width Center image Midnight mode Switching the main and sub audio Convenient functions Convenient FUNCTIONS ssccccssssoccssssesessccesees 65 Display dimmer adjustment Listening with headphones Muting the sound Remote control operations for Kenwood DVD Players sccccccscscscccsscccecsscccscssescsscesesescecssees 66 Troubleshooting Troubleshooting srrssrrssrrerisseeesionecerecenione 67 Resetting the Microcomputer GIOSSALTYi ccisccerizionezizseonenenionizconanioninicneorisonianenioni 69 Specifications nserrssrrerrrerereresecesconecesecneeone 71 Special Features HDMI High Definition Multimedia Interface repeater function Compatibility with the HDMI interface can transfer HDTV video
3. List List of selected items iPod operation iPod DISPLAY TIME e SHUFFLE REPEAT Play and pause Press gt II Pressing gt H during play will pause the play Pressing it again will cancel pausing The name of the currently playing file is displayed File skip Press lt lt or gt gt If ma a is pressed in the middle of playback the playing file will be replayed from the beginning Fast forward and backward Operation available only on the remote control unit Press lt lt or gt gt Keep pressing the key until you reach the desired point Play starts when the key is released The information selected in lt Switching the time information gt is displayed Repeat play Operation available only on the remote control unit Press REPEAT Each press switches the mode as follows Display Mode Repeat One Single track file repeat Repeat All All tracks files repeat Repeat Off Repeat play is cancelled Shuffle play Operation available only on the remote control unit Press SHUFFLE Each press switches the mode as follows Display Mode Shuffle Track Plays tracks files in a random order Shuffle Album Plays albums in a random order Shuffle Off Disables the shuffle play Switching the display Operation available only on the re
4. VIDEO COMPONENT VIDEO IE IN OVON VIDEO2 IN MONITOR OUT YDES N DOO 0O6606 900 000000 ON MONITOR OUT w gt gt AUDIO IN AUDIO OUT VIDEO OUT VIDEOIN VCR DVD recorder etc English 23 Connecting an iPod The PNC iP120 optional is necessary to connect an iPod to this unit For the usable iPod models see lt iPod models usable with this unit gt 7 FRONT SURROUND SUB WOOFER Testo DVD 6CH IN aE our ANTENNA m e SPEAKER A SPEAKER B FRONT SPEAKERS 6 160 Connections Display when an iPod is connected When an iPod is connected and the iPod input source is selected the display shows the connection status of the iPod Reading Blinking iPod is being recognized Connected iPod has been recognized Now this unit can control the iPod Connect Error The connection is erroneous Disconnect the iPod and connect it again The iPod in use is not compatible with this unit Connect an iPod compatible with this unit by referring to lt iPod models usable with this unit gt 7 The software version of the iPod may be obsolete Update the software version of the iPod by referring to lt iPod models usable with this unit gt 7 The battery is low Wait until the battery
5. 5 2 KRF V9300D KRF V8300D KRF V7300D DTS DTS 96 24 and DTS ES source Connected audio input jack HDMI OPTICAL COAXIAL DTS DTS 96 24 DE 96 24 5 DTS ES Discrete DTS ES Matrix Matrix Listen mode x2 xh omes x2 2h others x 2 2 12 DTS O O O O O DTS Neo 6 O DTS ES Discrete O DTS ES Matrix O DTS 96 24 O O O O DTS 96 24 Neo 6 O DTS 96 24 ES Matrix O Neo 6 Cinema O O Neo 6 Music O O Stereo Calmo O O O a 3 Can be selected when one or more surround back speakers are connected a c DTS HD Master Audio DTS HD High Resolution Audio and DTS HD Low Bit Rate Audio source e gt Connected audioinputjack PM DTS HD Master gt DTS HD Master Audio Audio 96kHz and lower 176 4kHz DTS HD High Resolution Audio DTS HD Low Bit Rate Audio a 192kHz Listen mode gt 2ch Others Li Others si Others DTS HD Master Audio DTS HD Maser Audio Neo 6 DTS HD High Resolution Audio DTS HD High Resolution Audio Neo 6 DTS HD Low Bit Rate DTS HD Low Bit Rate Neo 6 Neo 6 Cinema Neo 6 Music Stereo 3 Can be selected when one or more surround back speakers are connected English 53 Input signals and corresponding listen modes PCM and analog source RACING HDMI OPTICAL Connected audio input jack COAXIAL AUDIO PLAY IN Input signal 2ch Listen
6. BASS BOOST ACTIVE EQ o Ql MULTI CONTROL Ra ENTER 0 O O ACTIVE EQ 00 TONE O O S ENTER MULTI CONTROL via Adjusting the Tone Operation available only on the remote control unit The tone level can be adjusted when the input signal is a PCM or analog signal and the listen mode of this unit is set to Stereo and also ACTIVE EQ mode is set to Off 1 Press TONE 2 Select whether or not the tone level is to be adjusted Use MULTI CONTROL w A to select Tone On or Tone off a gt ENTER Display Setting Tone On The tone level can be adjusted Go to step 3 after setting Tone Off The tone level is not adjusted 3 Adjust the level of Bass low frequencies Use MULTI CONTROL V A to adjust the level ENTER ACTIVE EQ mode The optimum acoustic field effect can be selected according to the purpose of playback Press ACTIVE EQ The level is adjusted from 10 to 10 Adjust the level of Treble high frequencies Use MULTI CONTROL V A to adjust the level Each press switches the mode as follows Display Setting Active EQ Music Effective when listening to music Active EQ Cinema Effective when watching a movie Active EQ Game Effective when playing a game Active EQ Off Active EQ function is off ACTIVE EQ indica
7. Connections KI 1 6 KRF V9300D KRF V8300D KRF V7300D 900 9 0 0000 gt 00000 TORNEO Mc OPTICAL OPTICAL CD ASSIGNABLE _VIDEO2 DVD SUO1 93UUOI IN RECOUT PLAYIN RECOUT PLAYIN PLAYIN VIDEOT I VIDEO2 IN MONITOR OUT SPEAKER B CENTER PEAKERS 6 160 L n P La AUDIO OUT Analog sii E D c A EI S VIDEOIN VIDEO IN COMPONENT HDMI OPTICAL DIGITAL VIDEO IN MONITORIN OUT AUDIO TV Monitor English 1 7 Video up conversion function KRF V9300D and KRF V8300D This function converts and outputs the analog video signal input to this unit to the HDMI or other video signal format according to the connected monitor This unit is compatible with the following video signal formats Digital video signal HDMI Analog video signals COMPONENT VIDEO S VIDEO VIDEO m KRF V9300D Video player component Output HDMI Connections a COMPONENT S VIDEO VIDEO m KRF V8300D Video player component Output HDMI COMPONENT S VIDEO VIDEO VE This Unit AV Control Center Output Input Monitor output HDMI HDMI COMPONENT COMPONENT S VIDEO S VIDEO VIDEO VIDEO This Unit AV Control Cent
8. Insert until the metallic conductor becomes invisible 25 le 4 Release the lever S Md 2 8 KRF V9300D KRF V8300D KRF V7300D Insert into the groove 1 Insert the antenna cord Ss P FM outdoor antenna Lead the 750 coaxial cable connected to the FM outdoor antenna into the room and connect it to the FM 750 terminal Turning this unit ON Cd Co DVDIN VIDEO2IN L HDMI MONITOR OUT ON Slee IDO STANDBY 0000 O Oooo Vai 0000 0000 Do not remove this part for your safety FEO 1 After completing all of the necessary connections connect the power cord to a wall power outlet The standby indicator on the front panel lights red to indicate the standby mode 2 Press the ID Power key of this unit or the ON key of the remote control unit to turn this unit ON The standby indicator on the front panel goes out and the display panel lights up To turn this unit OFF standby mode Press the KO Power key of this unit or the STANDBY key of the remote control unit SUO1 53UUO ini English 29 Setup menu and its operations 1 Press SETUP to enter the setup mode KRF V9300D KRF V8300D i di i AUTO ROOM EQ KRF V9300D and KRF V8300D P l IKRF V7300D The Auto Setup mode can also be initiated by pressing the AUTO ROOM EQ key O O O EA
9. BAND key 56 Press to select the broadcasting band gt Il key 49 Press to play pause the music video playback of iPod AUTO MONO key Press to switch the radio tuning mode between auto tuning and manual tuning 36 Also used to select the recording mode 60 INPUT MODE key Press to select the input mode ACTIVE EQ key Press to switch the ACTIVE EQ function ON OFF INPUT SELECTOR knob Turn to select the input source PURE AUDIO MODE key Press to switch the PURE AUDIO MODE ON OFF AV AUX iPod key Press to switch the input source between AV AUX and iPod AV AUX jacks Connect a video camera videogame machine etc 44 61 48 Standby mode While the standby indicator is lit a small amount of power is supplied to the system to back up the memory This is called standby mode Under the condition the system can be turned ON by the remote control unit Display gt 1 ACTIVE EQ Ea gt lights up during playback iPod Lights up when and H lights up during play Lights up when an iPod is ACTIVE EQ is on y pause of the iPod connected T MUTE D Blinks when muting c Theindicatori gt AUTO DETECT eat corresponding to the Lights up when the input front speakers in use mode is set to Auto lights up HDMI Lights up when the E h components connected TONE ig its up when KRF V9300D with HDMI are Lights up when the the input level KRF V8300D recognized ton
10. DOLBY S E r x VIRTUAL DECODE ir LISTENMODE KRF V7300D EASY SETUP o 1 0 KRF V9300D KRF V8300D KRF V7300D RESOLUTION AUDIO x ni REPEAT RANDOM WET SHUFFLE KENWOOD REMOTE CONTROL UNIT RECEIVER ON key Press to turn this unit ON RECEIVER STANDBY key Press to put this unit to standby KRF V9300D KRF V8300D DOLBY VIRTUAL key 55 Press to switch the Dolby Virtual Speaker function or Dolby Headphone function ON OFF KRF V7300D PTY key 58 Press to search a radio station by program type STRAIGHT DECODE key d8 Press to switch the STRAIGHT DECODE mode ON OFF Numeric keys Also used to recall a preset radio station 88 Use to operate the Kenwood DVD player MULTI CONTROL gt w A keys Press to select a setting item G TOP MENU key Press to open the iPod menu 48 Use to operate the Kenwood DVD player AIV lt Il gt keys DVD ENTER key Use to operate the Kenwood DVD player RETURN key Press during the iPod menu operation 48 Use to operate the Kenwood DVD player MEMORY key 57 Press to preset radio stations in memory Il key Use to operate the Kenwood DVD player BAND key 56 Press to select the broadcasting band gt Il key Press to play pause the music video playback of iPod 9 Use to operate the Kenwood DVD player AUTO MONO key 56 Press to swit
11. Center Width Center Width Center Image Center Image 4 Midnight Midnight mode a 5 Main Sub Dual Mono Dual mono audio selection Main Sub Stereo The adjustment is only temporary for the current input selection The value will return automatically to the original setup value when the power is turned on off or when the input selection is changed 2 Analog source only 3 Pro Logic Il Music mode and Pro Logic IIx Music mode only 4 Neo 6 Music mode only For Auto Dolby TrueHD source only 3 Use MULTI CONTROL V A to adjust the desired item For detailed adjustment method see the explanation of each item To exit the sound adjustment mode Press SOUND 62 KRF V9300D KRF V8300D KRF V7300D Speaker level adjustment The output level from the desired speaker channels can be fine adjusted according to the properties of each source The adjustment is only temporary for the current input selection The value will return automatically to the original setup value when the power is turned on off or when the input selection is changed 1 Use MULTI CONTROL lt gt to select the speaker to adjust CNTR SR SBR SB SBL SL or SUBW 2 Use MULTI CONTROL V A to adjust the level 3 Repeat steps 1 and 2 to adjust the level of other speakers Input level adjustment Analog source only If the input level of an analog source signal is too high
12. gt ON 2 2 2 12m Zan 35m For details on the setting contents see lt Speaker setup Manual Setup gt 39 A Easy setup with may not be appropriate with certain speaker systems or listening environment In this case go through lt Speaker setup Manual Setup gt 36 Easy setup can set only the 7 1 channel system If the setup for the 5 1 channel or 6 1 channel system is required go through lt Speaker setup Manual Setup gt 36 English 31 KRF V9300D and KRF V8300D Speaker setup Auto Setup Auto Room EQ The Auto Room EQ function sets up the optimum home theater environment by automatically measuring and analyzing the following properties Connected speakers Distance from each speaker to the listening position Size of each speaker Polarity of each speaker Reproduce frequency characteristic of each speaker Volume level of each speaker This function uses the setup microphone provided with this unit The speakers output high level test tones during measurement Take special care for the neighborhood and sleeping children 3 when using this function particularly in the nighttime v un ENTER OCZ MULTI CONTROL gt v a CENTER AUTO ROMEO MICIN If headphones are plugged in unplug them 3 2 KRF V9300D KRF V8300D KRF V7300D 2 Place the microphone in the listening posit
13. signal which output from the connected component Operation available only on the remote control unit The type and number of channels of the audio signal input at the HDMI input can be checked si 1 Press DISPLAY The type and number of channels of the HDMI input signal are displayed for a few seconds Example Display with DTS HD Master Audio 5 1 channel input se mmr ots WoMsTR aw eal E si There are some video contents which have more audio signals recoreded than the input channel indicator on this unit are shown This is because at the recording studio the audio sometime is produced with a different speaker configuration rom the standard speaker configuration n this case the input channel indicator only shows the channels which are the same as the standard speaker configuration and display shows the total number of channels recored in the video contents Example Total number of channels is 7 1ch and the input channel indicator is showing 5 1ch DIGITAL DTS HD MSTR Input channel indicator Total number of channels Even in the case above the optimum playback is perfomed according to the speaker setup speaker re mapping function BIAOW JO DISNW Hulke English 47 ing music or movie Play iPod control When an iPod is connected to the iPod terminal of this unit using PNC iP120 optional the iPod
14. the CLIP indicator will light to indicate Adjust the input level 1 Use MULTI CONTROL lt gt to select INPUT 2 MULTI CONTROL V A to adjust the input level Panorama mode Center width Pro Logic IIx Music and Pro Logic Il Music mode only The acoustic field of the front channels can be expanded till the field of surround channels which makes it possible to create sound expansion in the front of the listener 1 Use MULTI CONTROL lt gt to select PANORAMA 2 Use MULTI CONTROL w a to select On or Off Display Setting PANORAMA On PANORAMA mode is on PANORAMA Off PANORAMA mode is off Dimension Pro Logic IIx Music and Pro Logic Il Music mode only The center of the acoustic field can be moved toward the front or rear 1 Use MULTI CONTROL lt gt to select Dimension 2 Press ENTER 3 Use MULTI CONTROL V A to move the acoustic field to the front or rear Dimension indicator Sound center moved toward the rear Sound center moved toward the front Pro Logic IIx Music and Pro Logic Il Music mode only The center channel audio can be distributed to the front left and right speakers to enhance the width of the sound in front of the listener 1 Use MULTI CONTROL lt gt to select Center Width 2 Press ENTER 3 Use MULTI CONTROL W
15. 3 0 KRF V9300D KRF V8300D KRF V7300D KRF V7300D Speaker setup Easy Setup The speaker settings can be completed by simply selecting the room type and listening position The audio will be corrected 3 Select the listening position automatically according to the characteristics of the speaker A system in use Use MULTI CONTROL v A to select your listening If more detailed speaker settings are required use the procedure position in lt Speaker setup Manual Setup gt 36 4 ENTER O O O EASY SETUP Reference for listening position 0000 0000 OO es Bee MULTI CONTROL resol a 1 Press EASY SETUP to enter the easy setup mode 2 Set the listening room size Use MULTI CONTROL V A to select your room type D The speakers are set up as shown below ENTER Subwoofer ON Front speaker FRNT Normal in lt Speaker configuration SP 5m 16 5 3 8 Setup gt of manual setup Reference for listening room size 4m 13 1 7 8 Center speaker CNTR Normal in lt Speaker configuration SP Setup gt of manual setup 3m 9 10 3 8 Surround speaker lt gt SURR Normalx2 in lt Speaker configuration SP gi 6 Setup gt of manual setup 8 E EZ WL Surround Back speaker SB Normal in lt Speaker configuration SP Setup gt of manual setup n8 L 8 6L W9 4 18 L L L Wy Subwoofer Re mix
16. 440 mm 17 5 16 S H 159 mm 6 1 4 RE FAR EAR D 394 mm 15 1 2 Weight net KRF V9300D 11 0 kg 24 3 Ib KRF V8300D KRF V7300D 10 9 kg 24 0 Ib VE 1 Kenwood follows a policy of continuous advancements in development For this reason specifications may be changed without notice 2 The full performance may not be exhibited in an extremely cold location under a water freezing temperature bunooysajgnoa i English 71 KENWOOD For your records Record the serial number found on the back of the unit in the spaces designated on the warranty card and in the space provided below Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product Model Serial Number
17. A to move the acoustic field to the left or right Center width indicator When the indicator extends to the left and right wider more part of the center channel audio is distributed to the front left and right speakers E This setup is not available when the center speaker setup is Off Center image DTS Neo 6 Music mode only The output level ofthe center speaker can be adjusted 1 Use MULTI CONTROL lt gt to select Center Image 2 Press ENTER 3 Use MULTI CONTROL V A to adjust the center speaker output Center image indicator _ _ When the indicator extends to the left and right wider more part of the center channel audio is distributed to the front left and right speakers A This setup is not available when the center speaker setup is Off zuaw3snfpe punos IR English 63 Adjustments according to the playing source Midnight mode Switching the main and sub audio Dolby TrueHD Dolby Digital and DTS mode only When watching movies at night you might not be able to raise the volume as loud as normal Midnight mode compresses the dynamic range of previously specified heavy sound passage of the Dolby TrueHD Dolby Digital and DTS mode sound track like scenes with sudden increases in volume to minimize the difference in volume between the scenes with heavy sound passage and scenes with normal sound passage This ma
18. DVD player Compatible DVD player models DV 4900 DV 4070B DV 2070 DV 203 DVF 9010 DVF K7010 DVF 5010 DVF R9030 DVF R7030 DVF 3530 DV 402 DV 5900 DV 5700 DVF R9050 DVF J6050 DV 505 DV 503 DV 502 DVF 3550 DVF 3050 DVF R4050 DVF 605 DV 6050 DVF R5060 DVF 3060 DVF 3060K DV 705 DVF R5070 DVF 3070 DVF 3080 DVF N7080 DVF 8100 DVF 3200 DVF 3250 DVF 3300 DVF 3400 DVF 5400 DVF 3500 and DVF 5500 How to operate the DVD player with the remote control 1 Press ID DVD to turn the DVD player on 2 Press DVD to operate the functions of the DVD player Pressing DVD allows you to control the connected Kenwood DVD player with this remote control unit 3 Press each key for DVD player operation Refer to the operation manual of the DVD players for the detailed operating instructions To return to the receiver operation mode press other Input source key DVD Step 1 r RECEIVER 0 PURE AUDIO ON STANDBY DVD MODE es n N eni co STRAIGHT VISTUAL DECODE r LISTENMODE DVD player operation keys prete eee eee teeeeeeee0e000 AUTO ROOM EQ OOOO Numeric keys SOUND 0000 MULTI CONTROL II TICA TOP MENU I MENU ENTER I Na A Cursor v Cursor Cursor gt lt Cursor 4 RETURN ON SCREEN Il Pause Il gt Play m Stop Convenient functions a jee Sea jaa Skip mri Skip TUNER cD MD TAPE AV AUX VIDE
19. PLAYIN PLAYIN RECOUT PLAYIN _AUX CD MD TAPE VIDEOt ANTENNA a co VIDEO2 IN MONITOR OUT HDMI DVD IN Paa 3 56 5V 500mA Em i way ee DVDIEGH IN meour J O S OO ao 5 TRL 00000 MONT 1007 m s O wW F VIDEOOUT S VIDEO OUT COMPONENT VIDEO OUT AUDIO OUT Analog O ef J DVD player etc E Disable the HDMI input if making the connection above See lt HDMI input setup HDMI Input gt 40 When the connected Video player and or TV monitor have the HDMI terminals it is recommended to use the HDMI connection See lt Connecting components equipped with HDMI terminals gt 13 2 2 KRF V9300D KRF V8300D KRF V7300D DVD gt 3 OPTICAL DIGITAL OUT AUDIO Connecting the video recorder component 1 Connect the audio line Connection B 2 Connect the video line Connection A 3 Connect the TV monitor Connect as shown in lt Connecting a TV Monitor gt 46 S eG OPTICAL OPTICAL COAXIAL om VibEG2 MoNTOR OUT SUO1 53UUOI ini YN CD MDITAPE VIDEO VOCH IN ANTENNA DE eo aN SURROUND BACK SURROUND SPEAKERS 6 160
20. from the broadcast signal for use with various functions such as automatic display of the station name Before using a function utilizing the RDS be sure to perform the RDS Auto Memory operation by referring to the description in lt RDS Auto Memory gt 87 RDS functions RDS AUTO MEMORY function Automatically selects and stores up to 40 RDS stations in the preset memory If fewer than 40 RDS stations have been stored in the preset memory regular FM stations will be stored in the remaining places PS Program Service Name Display Automatically displays the station name transmitted by the RDS station PTY Program TYpe identification Search Automatically tunes to a station that is currently broadcasting the specified program type genre RT Radio Text function Displays the radio text data transmitted by some RDS stations when you press DISPLAY There is No RT or RT display if no text data is transmitted The RDS indicator lights up when an RDS broadcast signal is received AUTO E STEREO TUNED Some functions and function names may differ for certain countries and areas RDS Auto Memory This function automatically stores up to 40 RDS stations in the preset memory In order to use the PTY function the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function 1 Press TUNER to select
21. immediately Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future Keep this manual handy for future reference IMPORTANT SAFETY INSTRUCTIONS AN Caution Read this page carefully to ensure safe operation Read Instructions All the safety and operating instructions should be read before the product is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the product and in the operating instructions should be adhered to Follow Instructions All operating and use instructions should be followed 1 Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 2 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 3 Water and Moisture This product shall not be exposed to dripping and splashing for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like Do not place an object containing liquid such as a flower vase on the appliance 4 Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child e or adult and serious damage to the product Use only with a car
22. is charged Disconnect The iPod is disconnected 2 4 KRF V9300D KRF V8300D KRF V7300D Release buttons PNC iP120 optional E Turn this unit OFF standby mode before connecting the iPod Insert the iPod connection cable all the way until it clicks To disconnect the iPod hold the release buttons on both sides of the connector of the iPod connection cable and pull the connector To prevent damage do not pull the connector with an excessive force While the iPod is connected to this unit the iPod can be controlled from this unit or the remote control unit provided with it When the iPod is connected to this unit it cannot be used to control its operations Connecting an MD recorder a cassette deck 1 Connect the audio line Connection A and B Dos COUT PLAYIN PLAYN_____ FRONT SURROUND Vi VIDEO DVDIGCHIN O SPEAKERB FRONT SPEAKERS 6 160 J w gt MD recorder or cassette deck Connection B is not necessary if the connected component is not used for recording Connecting to the AV AUX jacks A component that is usually not connected to this unit such as a portable video camera can be connected to the AV AUX jacks on the front panel of this unit PURE AUDIO MODE VOLUME CONTROL AV AUXIP
23. it left the factory 68 KRF V9300D KRF V8300D KRF V7300D Dolby Digital Digital multi channel audio standard developed by Dolby Laboratories It supports transmission and recording of high quality digital audio signals from monaural up to 5 1 channels using an amount of data that is a fraction of the PCM audio format The main features of Dolby Digital include e Downmixing optimized for monaural stereo and Pro Logic configurations as well as for playback of 6 1 channel audio Transfer of information related to the dynamic range and the conversation level adjustment e Wide range of operating bit rates Dolby Digital EX Dolby EX These extensions of Dolby Digital add the surround back channel to the Dolby Digital channels to deliver a surround effect with enhanced presence and listener envelopment Dolby Pro Logic Il This is a matrix decoding technology developed by Dolby Laboratories It generates 5 channel surround audio with rich feeling of presence from any stereo source delivering an excellent multidimensional sound field effect even from an ordinary stereo music content including CD music It offers three modes including the Movie mode optimized for movie playback the Music mode for music playback and the Game mode for game play Dolby Pro Logic IIx Matrix decoding technology developed by improving Dolby Pro Logic Il It accepts any stereo or 5 1 channel audio input and generates 7 1 channel surround audio wi
24. mode 96kHz and lower Over 96kHz Pro Logic IIx Movie Pro Logic Il Movie Pro Logic Ilx Music Pro Logic Il Music Pro Logic IIx Game Pro Logic Il Game Pro Logic Neo 6 Cinema Neo 6 Music PCM Stereo Pro Logic ll is selected if no surround back speakers are connected 4 Cannot be selected depending on the DVD Audio content Surround effects bea 5 4 KRF V9300D KRF V8300D KRF V7300D KRF V9300D and KRF V8300D DVD 6 channel analog input Virtual mode Surround play is possible if you use a DVD player with 6 5 1 channel output These modes allow you to enjoy surround sound even when you use headphones or you connect only the front speakers 0 000 o O INPUT MODE INPUT SELECTOR DOLBY VIRTUAL rr 0000 0000 0000 0000 1 Press DOLBY VIRTUALI Each press switches the setting as follows Dolby Virtual Speaker mode When not using headphones 2025 Display Setting So DVD Dolby VS Wide Provides the virtual surround effect with a wider expansion and spatial feeling Preparations e Connect your DVD player to the DVD 6CH IN terminals of this unit Dolby VS Off Sets the Dolby Virtual Speaker mode to off e Turn the components to be used ON Dolby VS Ref Provides the virtual surround effect This is the standard setting S 93jja punowins i
25. replaced by the new one English 57 Listening to radio broadcasts DSi Receiving preset stations Numeric keys TUNER w DOO DODO 1 Press TUNER to select tuner as the source 2 Enter the number of the preset station you want to receive up to 40 preset numbers Press the Numeric keys in the following order For preset No 15 10 and 5 For preset No 20 10 10 and 0 AUTO Mio STEREO Preset number B Ifyou make a mistake entering a two digit number press 10 repeatedly to return to the original display and start again Receiving preset stations in order P CALL lt gt P CALL aa TUNERS DO Oc C Ico 1 Press TUNER to select tuner as the source 5 8 KRF V9300D KRF V8300D KRF V7300D 2 Use P CALL lt P gt to select the desired station Each time you press the key another preset station is received in order Holding down the P CALL lt P gt lets you skip through the presets receiving each preset station at 0 5 second intervals E MULTI CONTROL lt 4 can also be used to select the preset station Tuning by program type PTY search This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of prog
26. unit in a poorly ventilated place This unit is using the cooling fan Do not place the unit onto a bed a sofa a carpet or similar Sucked in dust can cause fire Leave some space around the unit from the largest outside dimension including projection equal to or greater than shown below Side panel 10 cm Back panel 10 cm 1 4 KRF V9300D KRF V8300D KRF V7300D Speaker placement Front speaker Front speaker 7 a LO _ le 4 del eaker 4 Subwo i SS ofer Surround speaker Surround Back speaker 6 1ch Surround speaker Surround Back speaker 7 1ch Front speakers Install in the front left and right positions Symmetrical installation is ideal The front speakers are always used regardless of the listen mode Center speaker Install in the front center position This speaker improves the acoustic image positioning and reproduction of sound movement Surround speakers Install straight on or slightly behind the left and right of the listening position at in an as high as possible height ideally one meter above the height of the listener s ears Symmetrical installation is ideal The surround speakers reproduce the feeling of movement and presence of sound Subwoofer In general install on the front center position near the front speakers The subwoofer reproduces the powerful bass ef
27. 300D KRF V7300D Loading batteries 1 Remove the cover Insert two R03 batteries following the polarity indications 3 Close the cover The supplied batteries may have shorter lives than ordinary batteries due to use during operation checks When the remote controllable distance gets shorter than before replace both batteries with new ones ACAUTION Do not leave the battery near fire or under direct sunlight A fire explosion or excessive heat generation may result Operation Operate the remote control unit by pointing it to the remote sensor of this unit When this unit is in standby mode which is indicated by lighting of the standby indicator pressing the ON key turns this unit ON Pressing the STANDBY key turns this unit OFF standby mode When operating the connected components always press the input source key of the component you need to operate first to swith the remote control unit to the selected input source mode and then press the keys of the corresponding operation Operating range Approx Standby indicator Remote sensor ON elena o lame STANDBY asn alojag i English 1 3 Connections Notes on connections ANCAUTION Do not connect the power cord to a wall outlet until all connections are completed When connecting the related system components be sure to refer to the instruction manuals suppli
28. Digital Manual is selected press LISTEN MODE Playback VOLUME CONTROL VOLUME A V Input source keys 1 Select the source Use the Input source keys on the remote control unit to select a source Or use INPUT SELECTOR knob or AV AUX iPod key on the main unit 2 Start playback from the selected source The iPod can be controlled from this unit See lt iPod control gt 48 3 Use VOLUME A V to adjust the volume 4 Enjoy various surround effects You can enjoy a variety of listen modes See lt Surround play using the listen mode gt S1 The surround effects can be fine tuned according to the selected input source See lt Adjustments according to the playing source gt 62 E The AV AUX and iPod inputs cannot be selected with the INPUT SELECTOR knob of this unit These inputs should be selected using the AV AUX iPod on this unit or the AV AUX or iPod key on the remote control unit Monitoring the input source in the original sound STRAIGHT DECODE mode The signal input from a source can be output directly without any sound field effect added to it STRAIGHT DECODE Carat co STRAIGHT DECODE 0000 0000 0000 009000 1 Select the source 2 Start playback from the selected source 3 Press STRAIGHT DECODE When STRAIGHT DECODE mode is enabled the listen mode is selected aut
29. EEE English 33 KRF V9300D and KRF V8300D Speaker setup Auto Setup Auto Room EQ If a message is displayed Error messages If an error or a confirmation message is displayed and E1 No Mic measurement is stopped in the middle a trouble may be detected during the measurement Read the message and take the proper measure before retrying measurement The setup microphone is not connected Connect the provided setup microphone to the AUTO ROOM EQ MIC IN jack Error message Take the measure according to the message and retry measurement E2 Phones Confirmation message Check the message content The Headphones are connected operation can be continued without retrying measurement Unplug the he dphojes E3 No Sp L R E3 No Sp L One or both of the front speakers are not connected Connect the front speakers properly Q gt da v n 3 4 KRF V9300D KRF V8300D KRF V7300D E3 No Sp SL E3 No Sp SR One of the surround speakers is not connected Connect the surround speakers properly E3 No Sp SBL One of the surround back speakers is not connected f the system is a 7 1 channel system connect both the surround back left and right speakers If it is a 6 1 channel system connect the surround back speaker to the SURROUND BACK L terminal E3 SB w o S The surround left and right speakers are not connected Connect the surround left and right speakers pr
30. INK Off The HDMI control functions are not used When HDMI LINK On is selected the HDMI indicator on the front panel lights blue If HDMI LINK On is set proceed to the lt Power Control gt setup Power Control This function selects whether or not the power status of this unit is interlocked with the power ON OFF and start of playback of the connected components 1 Set the HDMI power control on or off MULTI CONTROL v A SI o ENTER Display Setting POWER CTRL On Turning the TV ON OFF also turns this unit ON OFF with an interlocked operation POWER CTRL Off The power ON OFF status of this unit is not interlocked with the power ON OFF status of the TV If POWER CTRL On is set proceed to the lt TV Control gt setup ms EEE English 41 os gt da cy un TV Control When this setup is On the TV can be used to control the functions including the volume adjustment of this unit 1 Set the HDMI TV control on or off MULTI CONTROL vw A o ENTER Display Setting TV CTRL On The TV can be used to control this unit TV CTRL Off This unit cannot be controlled from the TV VE The functions controllable from the TV are variable depending on the TV model Refer to the instruction manual for your TV TV AUDIO IN TV Audio In When the audio input of the TV is switched from the HDMI input the signal from t
31. KENWOOD AUDIO VIDEO CONTROL CENTER KRF V9300D KRF V8300D KRF V7300D INSTRUCTION MANUAL Kenwood Corporation Declaration of Conformity with regard to the EMC Directive 2004 108 EC Manufacturer Kenwood Corporation 2967 3 Ishikawa machi Hachioji shi Tokyo 192 8525 Japan EU Representative s Kenwood Electronics Europe BV Amsterdamseweg 37 1422 AC UITHOORN The Netherlands DO DOLBY DG DOLBY 0 Made for DIGITAL EX TRUESE DO iPod VIRTUAL SPEAKER HOM sdts up Master Audio Auto Room EQ RD S B60 5740 00 00 EW XW Before use Safety precautions A Caution Read this page carefully to ensure safe operation Units are designed for operation as follows AC 240 V only AC 230 V only WARNING TO PREVENT FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCT S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS p THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE SER
32. O1 VIDEO2 DvD AUX KRF V8300D iPod DIMMER DISPLAY TIME DVD Step 2 se LIDIA SUBTITLE EI ACTIVE EO BASS BOOST vipeo Music RESOLUTION AUDIO REPEAT RANDOM l Cj Cj a RANDOM AUDIO REPEAT KENWOOD REMOTE CONTROL UNIT 66 KRF V9300D KRF V8300D KRF V7300D Troubleshooting Amplifier Symptom Cause Remedy No sound from the speakers e speaker cords are disconnected Connect it properly referring to lt Connecting speakers gt VOLUME is set to the minimum position Adjust the volume to a proper level UTE is ON Turn OFF the MUTE 88 e SPEAKERS switches are set to OFF Set the SPEAKERS switch to ON 44 e headphones are connected Disconnect the headphones e input source selection is incorrect Select the input source you want to play HDMI setup is disabled Confirm the HDMI input by referring to lt HDMI input setup HDMI Input gt and HDMI audio output b referring to lt Audio Out gt 40 41 e input mode is not set properly Select the optimum input mode by referring to lt Selecting the input mode gt 44 Audio signal may not be output depending on the Refer to the instruction manuals that come with the connecting method and connected components connected components The standby indicator blinks and sound is not output Speaker cords are short circuited Turn the power off eliminate the short circuiting then turn on the power again If th
33. ONITOR OUT terminal of this unit to the HDMI input terminal of the TV monitor n aH TAL HDMI OUT HDMI OUT SS Video Player DVD Player Using the HDMI function The HDMI setup is required to use the HDMI function First enable the HDMI input as described in lt HDMI input setup HDMI Input gt 40 Flow of video signal The digital video signal input from the HDMI input terminal is output only at the HDMI monitor output terminal KRF V9300D only The video up conversion function can output the video signal input from the VIDEO S VIDEO and COMPONENT VIDEO terminals at the HDMI output terminal See lt Video up conversion function gt 8 Flow of audio signal The digital audio signal input from the HDMI input terminal is output at the speakers connected to this unit It can also be output at the TV monitor connected to this unit according to the HDMI setup See lt HDMI setup gt 40 HDMI MONITOR IN TV Monitor E An HDMI DVI converter cable is necessary to connect a TV monitor with a DVI input terminal The TV monitor also needs to be compatible with HDCP High bandwidth Digital Contents Protection Note that the video may be unable to be monitored depending on the combined components Use an HDMI certified category 2 cable High Speed HDMI Cable for the connection When com
34. Od VIDEO L AUDIO R VIDEO L AUDIO R a Aa VIDEO OUT AUDIO OUT Portable video camera game player and etc SUO1 53UUO ati English 25 Connecting speakers Powered Subwoofer OT Salo The UB WOOFER Spi PONENT Dr i PECOUT PLAYIN PLAYIN FRONT VIDEO VIDEO2 AUX OD MDSTAPE ANTENNA Re v 2 o E OPTICAL OPTICAL COAXIAL ce presa viDEO2 ovo DVDIN VIDEO2IN MONITOR OUT HDMI J Center speaker Right Left Surround Back speakers Left Front speakers A Right Left Surround speakers Right Left Front speakers B E Speaker impedance 6 160 Never short circuit the and speaker cords Ifthe left and right speakers are connected inversely or the speaker cords are connected with reversed polarity the sound will be unnatural with ambiguous acoustic imaging Be sure to connect the speakers correctly When only one surround back speaker is used connect it to the SURROUND BACK L terminal When connecting the second set of front speakers or a set of speakers installed in another room connect them to the SPEAKER B terminals 2 6 KRF V9300D KRF V8300D KRF V7300D How to conne
35. R Surround Back Right speaker Surround effects About indicators Listen mode Input signal format indicators The indicator for the selected listen mode lights up The DIGITAL indicator also lights up when the input is a digital signal AUTO ROOM EQ i DIGITAL O0D TrueHD DTS HD MSTR HIRES LBR 96 24 ES STEREO MULTICH prys i DUAL MONO SP iPod AUTODETECT SCHINPUT DOEX PLIlx MOVIE MUSIC GAME DISCRETE POM GUYS ACTIVEEG MUTE TD fe fry AS hm HI HDMI ANALOG OPT COAX NEO 6 CINEMA MATRIX STRAIGHT OOH TONE CLIP i GW PTY AUTO i RDS i sl Ls SR MHz STEREO sBL sB SBR kHz TUNED Input channel indicators The LFE indicator lights when the LFE channel signal These indicators show the input channels used with the is input The LFE level can be adjusted See lt LFE Low playing music and video Frequency Effect level LFE Level gt 38 These indicators do not show the channels selected in the The S indicator lights when the surround signal consists of current listen mode a single channel 5 0 KRF V9300D KRF V8300D KRF V7300D Surround play using the listen mode Select the listen mode according to the source being played back LISTEN MODE Preparations e Turn the components to be used ON e Complete lt Speaker setup gt e Select the source you wish to play b
36. SY SETUP KRF V7300D e SETUP For Easy Setup mode press the EASY SETUP key 2 Use MULTI CONTROL lt gt to select an item and press ENTER e ENTER If a submenu is opened select one of its items with the same procedure rey CONTROL 3 Perform setup by referring to the page describing the selected item Setup Menu Submenu Setting details page 3 KRF V7300D Easy Setup The speaker setup is possible by simply selecting the listening room size and the B o only listening position If a finer setup is required please use Manual Setup un Auto Setup Room EQ Sets whether or not the equalizer curve obtained with Auto Setup is used 35 KRF V9300D and Calibrate Measures and analyzes the properties of the speakers and listening room 32 KRF V8300D Confirm Confirms the results of Auto Setup 32 only Return Returns to the setup menu Manual Setup SP Setup Selects the use of each speaker and its size 36 SP Level Adjusts the speaker output levels 37 SP Distance Sets the distance between each speaker and the listening position 37 Return eturns to the setup menu Subw Re Mix ixes the bass tone of other channels to the subwoofer channel 38 Crossover Sets the lower limit of the bass frequencies reproduced from the speakers set to Normal in 38 he SP Setup The frequencies below the frequency set here are distributed to other speakers those set to Large and the subwoofer LFE Level Adj
37. TROL w A to select SETUP Locked rea wv ENTER Display Setting SETUP Locked Lock the setup contents SETUP Unlocked Unlock the setup contents Confirming the HDMI function Note that some HDMI control functions may not work with certain components and TV that are not compatible with them To use the HDMI control functions properly it is recommended to confirm the HDMI control functions usable with each connected component by performing the steps described below If a function that is not available with a connected component is found the related setup should be set to off before using this unit Before operation e Check that this unit the TV and the HDMI connection capable components are connected through HDMI cables e Check that the HDMI control of the TV and the HDMI connectable components are enabled For the setups of the TV and player components refer to their instruction manuals e Enable the HDMI control of this unit HDMI LINK On POWER CTRL On TV CTRL On TV AUDIO IN On Confirming the basic HDMI operations 1 Turn all of the HDMI connected components ON 2 Switch the TV input to an input source connected through HDMI connection to this unit 3 Set the input selector of this unit to select the HDMI connected input source and confirm that its video is displayed and the audio is output from the speakers properly Confirming the HDMI control functions 1
38. Turn all of the HDMI connected components ON 2 Adjusts the volume with the remote control unit of the TV Is the volume of this unit adjusted accordingly HDMI Control confirmation 3 Turn the TV OFF standby with its remote control unit Are all of the components turned OFF Power Control confirmation 4 With all of the HDMI connected components OFF start playing a player component Are all of the components turned ON and the inputs of this unit and the TV switched automatically HDMI Link and Power Control confirmations 5 If the TV has the audio output selector switch the input selection and confirm that the appropriate audio is output Is the appropriate audio output from this unit or the TV according to the audio input selection of the TV TV Control confirmation Ifthe TV does not have the audio output selector set TV CTRL in the HDMI setup of this unit to Off and select the audio output destination in Audio Out If noise interferes with TV set Audio Out to this unit or set the audio output of the TV and recorder player component to PCM by referring to their instruction manuals 6 Switch the TV input to the built in tuner Is the input to this unit switched automatically to OPT1 TV Audio In confirmation es The HDMI control functions are not available during the following operations During speaker setup using test tone During auto setup KRF V9300D and KRF V8300D Whil
39. VICING INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE 1 THE EXCLAMATION POINT WITHIN AN EQUILATERAL Information on Disposal of Old Electrical and Electronic Equipment and Batteries applicable for EU countries that have adopted separate waste collection systems Products and batteries with the symbol crossed out wheeled bin cannot be disposed as household waste Old electrical and electronic equipment and batteries should be recycled at a facility E capable of handling these items and their waste byproducts Contact your local authority for details in locating a recycle facility nearest to you Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment Pb Notice The sign Pb below the symbol for batteries indicates that this battery contains lead 2 KRF V9300D KRF V8300D KRF V7300D Unpacking Unpack the unit carefully and make sure that all the accessories are present FM indoor antenna 1 AM loop antenna 1 Remote control unit 1 KRF V9300D RC R0923 KRF V8300D RC R0831 KRF V7300D RC R0733 Batteries R03 2 ij KRF V9300D KRF V8300D only Batteries are attached to the packing material If any accessories are missing or if the unit is damaged or fails to operate notify your dealer immediately If the unit was shipped to you directly notify your shipper
40. ack with surround sound Select the input mode 44 When the input mode is set to Full Auto or Signal Auto i e when the AUTO DETECT indicator is lit the listen mode matching the input signal type and speaker setups is selected automatically Noise may be produced when a DTS source is played by selecting the analog input S 93jja punowins Fa 1 Start playing the selected source 2 Use LISTEN MODE to select the listen mode Each press switches the listen mode For the types of listen modes see lt Input signals and corresponding listen modes gt 52 English 51 Surround effects LE Input signals and corresponding listen modes Dolby Digital Dolby Digital EX Dolby Digital Plus and Dolby TrueHD source Connected audio input jack HDMI OPTICAL COAXIAL HDMI Dolby Digital a Dolby Digital EX Dolby Digital Plus Dolby TrueHD 96kHz and lower Dolby TrueHD 176 4kHz 192kHz x 3 x 3 Listen mode 2 2ch Others x 4 2ch Others x 2 x 4 2ch Others Dolby Digital Dolby Digital Pro Logic IIx Movie Dolby Digital Pro Logic IIx Music Dolby Digital EX Dolby Digital Plus Dolby Digital Plus Pro Logic IIx Movie Dolby Digital Plus Pro Logic IIx Music Dolby Digital Plus Dolby EX Dolby TrueHD Dolby TrueHD Pro Logic IIx Movie Dolby TrueHD Pro Logic IIx Music Dolby TrueHD Dolby EX Pro Logic IIx Movie Pro Logic I
41. act your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 8 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product 9 Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges 10 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 11 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 12 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 13 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the
42. al Music Nation M display rama Drama Oldies Music Oldies Each press switches the display mode as follows Culture Culture Folk Music Folk M PS Program Service name display Science Science locumentary Document RT Radio Text display Varied Speech Varied Frequency display 3 Press ENTER to start searching PS Program Service name display Example Searching for a Rock Music broadcast The station name is displayed automatically when an RDS Display while searching broadcast is received If no PS data was sent No PS is displayed Blinks Sila FIS Program type name display RT Radio Text display Display when a station is received Text data accompanying the RDS broadcast scrolls across Goes out the display No RT or RT is displayed if the current a RDS station does not provide RT data me TUNED Station name display No sound is heard while PTY is blinking Frequency display If the desired program type cannot be found No Program Displays the frequency of the current station is displayed then after several seconds the display returns to the original display AUTO pis STEREO To select another program type sjse gt peojq oped 0 Buluaysiy Repeat steps 1 2 and 3 E MULTI CONTROL gt can also be use to select a station English 59 Recording Recording mode setting in d
43. an be selected See lt Switching the video resolution gt 47 1 8 KRF V9300D KRF V8300D KRF V7300D Connecting a CD player 1 Connect the audio line Connection A digital or B analog COAXIAL un fue o opioa fbrricar nossa n peoa DVD DVD IN ee a MONITOR OUT appo POOL O VIDEO2 DVD 6CH IN a SUO1 53UUO dati OPTICAL VIDEO2 DVD w gt AUDIO OUT OPTICAL OUT o o 0 CD player A If connection A is used assign the input source to CD See lt Input Assignment Assignment gt 39 English 1 9 Connecting a DVD player 1 Connect the audio line Connection A digital or E analog 2 Connect the video line Connection B C or D 3 Connect the TV monitor mi Connect as shown in lt Connecting a TV Monitor gt 46 cr He OPTICAL OPTICAL CD ASSIGNABLE VIDEO2 DVD Connections DVDIN VIDEO2IN MONITOR OUT HDMI J PLAYIN PLAYIN RECOUT PLAVIN AUX OD MDMAPE VIDEOT ANTENNA JO
44. and features the capability of transferring both non compressed digital video and multi channel digital audio through a single cable This unit is compatible with the HDMI optional functions listed below Deep Color Video signals with a larger number of bits per color component than ordinary 8 bits such as the 10 bit and 12 bit signals can be transferred to achieve richer expression of gradations e x v Color A larger variety of colors or about 180 more colors than the number of colors of sRGB color space can be reproduced Lip Sync The video and audio are synchronized in the monitor by detecting the delay of monitored video automatically DVI DVI Digital Visual Interface is the standard for connection between PC and display Troubleshooting HDCP HDCP High bandwidth Digital Contents Protection is copyright protection technology for prevention of illegal duplication of video contents It is used in encryption of digital interfaces such as DVI and HDMI x v Color and x v Color logo are trademarks of Sony Corporation 7 0 KRF V9300D KRF V8300D KRF V7300D Specifications AUDIO section Rated output power during STEREO operation 63 Hz 20 kHz 0 7 T H D at 6 Q sssssssssossssossssossss 100 W 100 W Effective output power during STEREO operation RMS 1 kHz 10 T H D at 6 Q csessssesscssssessessssesesssseeses 130W 130W Effective power output during SURROUND operation FRONT 1
45. and latest high quality audio It makes possible entertainment of high quality video recorded on Blu Ray discs as well as high quality audio including Dolby TrueHD DTS HD Master Audio and multi channel PCM audio Video up conversion KRF V9300D This function converts the analog video signal into a signal that can be output at the HDMI terminal Any video signal can be converted into HDMI video signal by simply connecting this unit to a TV through a commercially available HDMI cable provided that your TV has an HDMI terminal In addition this unit also incorporates the upscaler function which converts the analog video signal into an HDTV signal for enjoying high quality video KRF V8300D This function converts the video signal output at the VIDEO and S VIDEO terminal into a signal that can be output at the COMPONENT VIDEO terminal High quality music playback in Pure Audio Mode This function reproduces music signals in high quality with high fidelity to original sound In this mode the display and the analog video circuitry are turned off to eliminate their effects on the audio circuitry In addition the optimum listen mode is selected according to the input music signal iPod control This unit can control an iPod connected to it using the PNC iP120 iPod connection cable optional The music can be reproduced from the speakers connected to this unit and the video can be reproduced on the TV connected to this unit Au
46. anged to other signal no signal is output RecMode Manual Manual record mode When the A REC mode is selected the digital input signal is converted to stereo signals even if the digital signal is changed When the digital mode changes during recording in the A REC mode the audio input source may be interrupted momentarily For A REC mode 60 KRF V9300D KRF V8300D KRF V7300D For M REC mode 4 Start playback then start recording If the audio reproduction stops in the middle due to change in the input signals etc press AUTO MONO E Recording mode cannot be set when HDMI is enabled See lt HDMI input setup HDMI Input gt 40 Recording audio analog sources 1 Use INPUT SELECTOR to select the source other than MD TAPE you want to record 2 Set the MD or TAPE recorder to record 3 Start playback then start recording Recording video 1 Use INPUT SELECTOR to select the video source other than VIDEO1 you want to record 2 Set the video recorder component connected to VIDEO 1 to record Select the recording mode to record a digital input source See lt Recording mode setting in digital audio source recording gt 3 Start playback then start recording 8g Recording may not be normal for some video software This is due to the copy guard condition Adjusting the sound
47. at the center speaker is connected with correct polarity C2 No Sp C The center speaker is not connected Connect the center speaker if one is available If it is not available this message can be ignored C2 No Sp SW The subwoofer is not connected Connect the subwoofer if one is available If it is not available this message can be ignored C2 No Sp S The surround speakers are not connected Connect the surround speakers if they are available If it is not available this message can be ignored C2 No Sp SB The surround back speakers are not connected Connect the surround back speakers if they are available If it is not available this message can be ignored C2 No Sp SBR The surround back right speaker is not connected Connect the surround back right speaker if one is available If it is not available this message can be ignored Setting Room EQ In addition to setting up the speakers Auto Setup also measures the acoustic characteristics of the listening room and creates an equalizer curve matching them Room EQ is used to select whether or not the equalizer curve is used 1 Select Room EQ AUTO ROOM EQ wv Use MULTI CONTROL lt gt to select Room EQ wv ENTER 2 Select whether the Room EQ curve is used or not Use MULTI CONTROL w A to select whether or not Room EQ is used wv ENTER D
48. can be controlled from this unit Preparations e Video compatible iPod only Set the TV OUT of the iPod to ON Set the TV Signal of the iPod to PAL e Using the PNC iP120 optional connect the iPod to the iPod terminal on the rear panel of this unit Be sure to turn this unit OFF standby before proceeding to the connection e Turn this unit ON Using the menus MULTI CONTROL via cope VIDEO Pode Poll wusic OO ccm 1 Press iPod to set the input source to iPod 2 Press TOP MENU to enter the menu mode If the iPod in use is not video compatible go to step 5 now 3 Video compatible iPod only Use MULTI CONTROL V A to select menu category VIDEO or MUSIC Press ENTER Use MULTI CONTROL w a to select an item Aw A Press ENTER 7 Repeat the step 5 and 6 until you reach the track file you want to play If a menu in level 3 or below has a large number of items pressing the 10 key makes it possible to skip 10 items at atime After selecting the track press ENTER or gt tl key to start its playback 48 KRF V9300D KRF V8300D KRF V7300D To select amenu in a different category Video compatible iPod only Press MUSIC or VIDEO on the remote control unit To return to the higher level in the hierarchy Press RETURN on the remote control unit E Pressing the gt II key after selecting a playlist an album an ar
49. ch power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 19 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE __ ANTENNA LEAD IN WIRE GROUND CLAMPS i ANTENNA gt DISCHARGE UNIT NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT J J GROUNDING CONDUCTORS lt NEC SECTION 810 21 3 GROUND CLAMP I _ POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE Notes 1 Item 7 is not required except for grounded or polarized equipment 2 Item 19 complies with UL in the U S A asn 3J0J9g English 3 Before use Leal ANTo ensure safety read the items carrying this marking carefully Before use Safety precautions cscscsss
50. ch the radio tuning mode between auto tuning and manual tuning E key Use to operate the Kenwood DVD player P CALL lt lt gt gt 1 keys Press to recall a preset radio station 58 Also press to skip an iPod track 49 Use to operate the Kenwood DVD player Input source keys Press to select the input source ACTIVE EQ key 8N Press to switch the ACTIVE EQ function ON OFF BASS BOOST key 61 Press to enhance bass sound KRF V9300D RESOLUTION key 47 Press to switch the resolution of the HDMI video output as a result of conversion of an analog video signal KRF V8300D KRF V7300D SUBTITLE key Use to operate the Kenwood DVD player AUDIO key Use to operate the Kenwood DVD player KRF V9300D KRF V8300D PTY key 58 Press to search a radio station by program type O DvD key NEA Press to switch the Kenwood DVD player ON OFF PURE AUDIO MODE key 46 Press to switch the PURE AUDIO MODE function ON OFF LISTEN MODE lt gt keys S1 Press to switch the listen mode KRF V9300D KRF V8300D ES D AUTO ROOM EQ key 32 Press to perform auto setup of the speakers KRF V7300D EASY SETUP key 31 Press to perform easy setup of the speakers SETUP key 30 Press to set up this unit TONE key ED Press to adjust the tone SOUND key EA Press to adjust sound quality and acoustic field ENTER key Press to enter the selected setting MENU key Use to operate
51. ct the wire to terminals 1 Strip the vinyl coating of the wire by a length of about 1 cm a 2 Loosen the knob Insert until the metallic conductor becomes invisible 4 Tighten the knob SUO1 53UUOI ati English 27 Connections Connecting antennas The broadcast reception cannot be made unless the antennas are connected Connect the antennas correctly as instructed below PLAYIN RECOUT PLAYIN RECOUT PLAYIN PLAYIN AB sta VIDEO VIDEO2 ANTENNA HE L 750 RB Sine EAKER A SPEAKEI FRONT SPEAKERS 6 160 Twist the conductors into a single bundle before connection AM loop antenna FM antenna adapter commercially available AM loop antenna Install in a position as apart as possible from this unit the TV monitor personal computer speaker cords and power cord and place in an orientation that can offer the best reception condition G2 FM indoor antenna Fix on a wall etc with a good reception condition The provided antenna is intended for temporary use in indoors To obtain stable FM reception it is recommended to use an outdoor antenna Be sure to disconnect the indoor antenna when an outdoor antenna is installed I b J FM outdoor antenna commercially available FM indoor antenna 1 Attach to the stand 2 Push the lever N A sh 3 Insert the antenna cord d
52. d for the other speakers f SURR Off is selected no surround back speaker can be selected f SURR Normal is selected for surround speakers SB Large cannot be selected for the surround back speakers Speaker level SP Level Speaker Distance SP Distance Adjust the volume levels of the speakers so that all of them are approximately identical 1 Select SP Level SETUP wv MULTI CONTROL lt gt wv ENTER 2 Select the test tone output method MULTI CONTROL lt gt rs D ENTER Display Setting TTONE Auto The test tone is heard from the speakers one after another with 2 seconds each TTONE Manu You can select the speaker channel from which the test tone is output TTONE Off The speaker levels can be adjusted using the sound being played Return Returns to Setup Menu 3 Adjust the volume level of each speaker If you select T TONE Auto When you hear the test tone from the speaker which you wish to adjust use MULTI CONTROL w A and adjust the volume of the test tone When you finish adjusting press ENTER If you select T TONE Manu or T TONE Off Use MULTI CONTROL gt to select the speaker channel to be adjusted and then use MULTI CONTROL w A to adjust its volume level After adjusting the levels of all the speaker channels press ENTER to enter the settings E Ifyou have a commercially avai
53. de Display Indicators HDMI Indicator Lights blue when the HDMI link is on DOLBY DIGITAL indicator Lights up when the DOLBY DIGITAL signal is input DTS indicator Lights up when the DTS signal is input HIGH DEFINITION indicator Lights up when one of the following signals is input through HDMI Dolby Digital Plus Dolby True HD DTS Master Audio DTS High Resolution Audio STRAIGHT DECODE indicator Lights up when STRAIGHT DECODE mode is on 4 Remote sensor VOLUME CONTROL knob G PHONES jack 8 KRF V9300D KRF V8300D KRF V7300D KRF V7300D DIMMER SPEAKERS A B OFF key A Press to select the speakers to be used LISTEN MODE knob Turn to select the listen mode MULTI CONTROL knob Turn to select a setting item lt lt gt P gt knob Turn to skip an iPod track 49 Also used to recall a preset radio station 58 MULTI CONTROL V A keys Press to select a setting item Also used to select a radio station EN 56 SETUP key 30 Press to set up this unit ENTER key Press to enter the selected item KRF V9300D KRF V8300D DOLBY VIRTUAL key 55 Press to switch the Dolby Virtual Speaker function or Dolby Headphones function ON OFF KRF V7300D DIMMER key 65 Press to switch the brightness of the display and indicators STRAIGHT DECODE key Press to switch the STRAIGHT DECODE mode ON OFF E
54. e TV monitor Except the HDMI video signal PURE AUDIO MODE indicator lights up The display is turned off 20 o 0 Ot To cancel Press PURE AUDIO MODE PURE AUDIO MODE is also canceled when the LISTEN MODE or STRAIGHT DECODE key is operated 46 KRF V9300D KRF V8300D KRF V7300D EA When the input mode is 6ch Input the listen mode does not change lt Selecting the input mode gt 44 The video other than the HDMI input video cannot be monitored when PURE AUDIO MODE is selected KRF V9300D only The video from the VIDEO S VIDEO or COMPONENT VIDEO signal input cannot be monitored even if it is converted for the HDMI output KRF V9300D Switching the video resolution Operation available only on the remote control unit Press to select the resolution of the HDMI video output as a result of conversion of an analog video signal RESOLUTION e DOO 1 Press RESOLUTION to select the resolution Each press switches the setting as follows Display Setting i a The resolution is set automatically according to Bes allo the connected TV monitor RES 1080p 1920 x 1080p RES 720p 1280 x 720p RES 1080 1920 x 1080 RES 480p 576p 720 x 480p 720 x 576p A The available resolution values vary depending on the connected TV monitor Checking the HDMI audio input
55. e setting is on is too high AUTO ROOM EQ Lights up during measurement by Auto Room EQ or when Room EQ is on Listen mode Input signal format indicators AUTO ROOMEQ sp li DUAL MONO SP_ iPod AUTODETECT DUAL MONO eI RDM L c R i SW LFE SL S SR SBL SB SBR DIGITAL F6CHINPUT DO EX PL IIx MOVIE MUSIC GAME DISCRETE ANALOG OPT COAX NEO 6 CINEMA _ IIID TrueHD DTS HD MSTR HIRES LBR 96 24 ES STEREO MULTICH r DOVS ACTIVEEQ MUTE MATRIX STRAIGHT DO H TONE CLIP PTY_ AUTO RDS STEREO MHz kHz TUNED Input channel indicators The indicators corresponding to the input channels audio signal used in the currently played music video light up DUAL MONO Lights up when the dual mono audio signal is input Character display PTY Lights up when searching a radio station by program type RDS Lights up when receiving an RDS station TUNED Lights up when a radio station is tuned STEREO Lights up when stereo broadcasting is tuned AUTO Lights up when the tuning mode is Auto English 9 Before use wal Names and functions of parts Remote control unit KRF V7300D PTY CT f RECEIVER a 5 PURE AUDIO Co KRF V8300D KRF V7300D SUBTITLE KRF V7300D AUDIO
56. e standby indicator still blinks after eliminating the short circuiting there may be an internal defect Switch it off unplug the power cord and call for service Sound is not output from one of the speakers The speaker cord is disconnected Connect it properly referring to lt Connecting speakers gt The speaker is not set up correctly Set it up properly referring to lt Speaker setup gt After setting confirm that the test tone is output BN BA e Some speakers do not output audio depending on the isten mode Sound is not output from the surround e surround speaker cords and or the center speaker Connect it properly referring to lt Connecting speakers gt speakers and or the center speaker or their sound is cord is disconnected 26 very soft The audio cannot be played in the desired signal format Digital connection is necessary to play the Dolby Digital Confirm that the input signal is connected to the Dolby Digital or DTS or DTS input signal in the input signal format digital input or HDMI input terminal by referring to _ lt Connections gt 4 29 e player component is not set for digital output Confirm the audio output setup of the player component by referring to its instruction manual When playing a Dolby Digital or DTS source the sound is ere are many possible causes for this problem Set the input mod
57. e the recording mode is set to on During auto memory of radio stations mes EEE English 43 ing music or movie Play Preparation for playing music or movie INPUT SELECTOR I O LISTEN MODE SPEAKERS A B OFF INPUT MODE C uam a am CO RECEIVER ON geal LISTEN MODE Input source keys Turning on the power 1 Turn the connected monitor and player component ON 2 Press RECEIVER ON remote control unit or IO main unit to turn on the unit Setting the speaker system Operation available only on the main unit of this unit Press SPEAKERS A B OFF to select the speaker system s to be used The speaker system s to be used light up HUTODETECT OC Ce CES oe on Speaker system B cannot be selected when the input mode is 6ch Input 44 KRF V9300D KRF V8300D KRF V7300D Selecting the input mode Operation available only on the main unit of this unit When playing a component connected to the digital input terminal CD ASSIGNABLE VIDEO2 or DVD or the HDMI input terminal DVD IN or VIDEO2 IN set the input mode to match the type of the audio input 1 Use INPUT SELECTOR to select CD or VIDEO 1 or AUX which you assigned to CD ASSIGNABLE terminal VIDEO2 or DVD input source 2 Press INPUT MODE to select the input mode Each press switche
58. e to Digital Manual Signal Manual cut off soon after it starts depending on the player used before starting playback of the Dolby Digital or DIS__ source 44 No sound is produced during playback from a DVD player The input mode is set to digital manual Press the INPUT MODE key to select to Full Auto _ Signal Auto A4 A video source cannot be recorded normally e software is copy guarded Copy guarded video software cannot be recorded The audio of a digital broadcast cannot be switched e audio of certain broadcasts cannot be switched with Switch the audio on the digital tuner this unit A message such as Ex XXX or Cx XXX is displayed A certain trouble is detected during the measurement for Refer to lt Error messages gt and lt Confirmation Auto Setup messages gt 34 35 Bulooysajqnosy i Continued C English 67 Troubleshooting Symptom Cause Remedy The video is not output or is disturbed The video component is not connected properly Connect it properly by referring to lt Connections gt If the video component is connected to this unit through HDMI connection the digital video signal input from the HDMI input terminals is output only at the HDMI monitor output terminal Video sig nal may not be output depending on the connecting method and connected components Refer to the instruction manuals that come with t connected components D The in
59. eaker wv Repeat the above operations until all of the speakers have been set up Speaker Display Setting SUBW On Subwoofer is connected Subwoofer SUBW Off Subwoofer is not connected FRNT Large Large size front speaker Front speaker i FRNT Normal Average size front speaker CNTR Large Large size center speaker Center speaker CNTR Normal Average size center speaker CNTR Off Center speaker is not connected SURR Large Large size surround speaker Surround speaker SURR Normal Average size surround speaker SURR Off Surround speakers are not connected 3 6 KRF V9300D KRF V8300D KRF V7300D Large A speaker with a sufficient bass reproduction capability a speaker with a large woofer or a large cabinet size ormal A speaker with a lower bass reproduction capability than the Large speakers the bass frequencies will be output from the speakers set to Large and the subwoofer If you cannot identify the size of a speaker it is recommended to set it to Normal When SUBW Off is selected the front speakers are automatically set to FRNT Large For FRNT Large selection no sound will be heard from subwoofer even it is set to ON If you set the Subwoofer Remix o On you will be able to hear sound from the subwoofer See lt Subwoofer Remix Subw Re Mix gt 38 f FRNT Normal is selected Large cannot be selecte
60. ed with the components you are connecting E Be sure to remove the power cord from the AC outlet before plugging or unplugging any connection cords Plugging unplugging connection cords without disconnecting the power cord can cause malfunctions and may damage the unit Be sure to insert all connection cords securely If their connections are imperfect the sound and video may not be produced or here will be noise interference If this unit is installed in the proximity of a source of magnetism such as a magnet color irregularities due to interference with the speakers may be observed on the TV monitor screen Be careful in he installation Microcomputer malfunction If operation is not possible or an erroneous display appears even though all connections have been made properly reset the microcomputer by referring to lt Resetting the microcomputer gt 68 ANCAUTION The power of this equipment will not be completely cut off from the wall outlet when the power switch is turned off Install the equipment so that the wall outlet is easily accessible and in case of emergency immediately unplug the power cord from the wall outlet ACAUTION Be sure to adhere to the following or proper ventilation will be blocked causing damage or fire hazard Do not install the unit on the rear side or top panel Do not cover the unit with a cloth or install the unit on a carpet or mattress Do notinstall the
61. er Output Input Monitor output HDMI HDMI COMPONENT COMPONENT S VIDEO S VIDEO VIDEO VIDEO Input Symbol used in lt Connecting a TV Monitor gt 16 HDMI Connection B COMPONENT Connection C S VIDEO Connection E VIDEO Connection o Input Symbol used in lt Connecting a TV Monitor gt 16 HDMI Connection B COMPONENT Connection C S VIDEO Connection E VIDEO Connection o To output the video signal from the HDMI monitor output enable the video input in the HDMI setup See lt HDMI input setup HDMI Input gt 49 When the video signal input from the VIDEO or S VIDEO terminal is output at the COMPONENT VIDEO terminal the video resolution becomes 576i or 480i The video signal from a VCR may be disturbed or non displayable in certain cases The picture quality of the converted video may be degraded for example the screen is flickered the text is not displayed clearly and etc In this case output the video signal from the TV monitor output terminal for the same format as the video input terminal used This unit is compatible with the PAL and NTSC TV formats KRF V9300D only When the video signal input from the VIDEO S VIDEO or COMPONENT VIDEO terminal is converted and output at the HDMI output the resolution of the video signal c
62. ers 0 1 to 30 0 ft in 0 03 meter 0 1 feet increments 4 Repeat step 3 for each speaker until the distances of all speakers are set 5 Press ENTER to enter the setting s EEE English 37 Subwoofer Remix Subw Re Mix Crossover Crossover Mixes the bass tone of other channels to the subwoofer channel 1 Select Subw Re Mix SETUP wv MULTI CONTROL lt gt Fj ENTER 2 Set the Subwoofer Remix Use MULTI CONTROL w A to select whether or not Subwoofer Remix is used Setup wv ENTER Display Setting SW RE MIX On Sets Subwoofer Remix to ON Sets Subwoofer Remix to OFF SW RE MIX Off In this case the bass frequencies are output only from the front speakers Subwoofer Remix cannot be setup if the Subwoofer is set to SUBW Off or the Front speakers are set to FRNT Normal 3 8 KRF V9300D KRF V8300D KRF V7300D The crossover frequency is the lower limit of the bass frequencies reproduced from the speakers set to Normal in the lt Speaker configuration SP Setup gt The frequencies below the set crossover frequency are output from other speakers those set to Large and the subwoofer 1 Select Crossover SETUP wv MULTI CONTROL lt gt wv ENTER 2 Set the crossover frequency Use MULTI CONTROL v A to select crossover frequency wv ENTER The frequency
63. fects As it is less directional to other speakers it can be installed so that the bass can be reproduced best according to the listening room layout Surround Back speakers Install on the rear of the listening position at the same height as the surround speakers When only one surround back speaker is installed the system becomes a 6 1 channel surround system When two surround back speakers are installed it becomes a 7 1 channel surround system E Ideal surround play is possible when all of the speakers above are installed If the center speaker and or the subwoofer is not installed the system optimizes playback according to the current system by assigning the sound of absent channels to other speakers Connecting components equipped with HDMI terminals The HDMI connection can transfer both the video and audio signals through a single HDMI cable It makes possible entertainment of high quality video recorded on Blu ray discs as well as high quality audio including Dolby TrueHD DTS HD Master Audio and multi channel PCM audio The HDMI connection also enables interlocking of the power of the TV with that of this unit and adjustment of the volume of this unit from the TV See lt HDMI setup gt 40 1 Using an HDMI cable connect the HDMI input terminal DVD IN or VIDEO2 IN terminal of this unit to the HDMI output terminal of a playback component such as a DVD player 2 Using another HDMI cable connect the HDMI M
64. he HDMI monitor output of this unit to the digital broadcasting the built in tuner of the TV or other external input this setup switches the input source of this unit to OPT1 IOPTICAL CD ASSIGNABLE terminal and allows the TV audio to be reproduced from the speakers connected to this unit This makes it possible to enjoy digital surround audio broadcasting etc in the surround environment set with this unit 1 Select TV Audio In SETUP wv MULTI CONTROL lt gt wv ENTER 2 Select an item to set MULTI CONTROL v A TE gt ENTER Display Setting The audio input can be switched automatically to output the TV AUDIO On TV audio from the speakers connected to this unit The input selector of this unit is also switched automatically to OPT1 TV AUDIO Off The audio is not switched automatically the input selector of this unit does not change E TV Audio In can be set when HDMI Link is on 42 KRF V9300D KRF V8300D KRF V7300D Locking the setups Setting Lock The setups of this unit can be locked so that they will not be altered by accidental press of keys om 3 or 0000 O O O SETUP OOOO O O gt ENTER Coat MULTI CONTROL d gt v A 1 Select Setting Lock SETUP wv MULTI CONTROL lt gt wv ENTER 2 Lock the setup contents Use MULTI CON
65. he display changes from Analyzing to Complete when Auto Setup completes p es gt When Confirm is displayed pressing the ENTER key makes it possible to confirm the measurement data See lt To confirm the measurement data gt 33 Use MULTI CONTROL lt gt to select Return wv ENTER E Certain listening room properties may cause errors in the results of measurements of the speaker levels and distances In this case set up the unit again using Manual Setup See lt Speaker setup Manual Setup gt 36 Ifthe speakers or speaker placement have changed after auto setup perform the auto setup again 1 Select Confirm and press ENTER in step 3 2 Use MULTI CONTROL lt gt to select the item to be confirmed and press ENTER And then use MULTI CONTROL lt gt to confirm its data The following setting data can be confirmed Speaker configuration SP Setup Speaker levels SP Level Speaker distances SP Distance Crossover frequency Crossover For details on the setting items see lt Speaker setup Manual Setup gt 36 To cancel measurement in the middle Any of the following operations will stop the measurement in the middle and returns the display to the normal input display Power ON OFF Pressing the AUTO ROOM EQ key e Press the SETUP key e Pressing the INPUT SELECTOR key ms
66. ic HDMI operations Confirming the HDMI control functions Playing music or movie Preparation for playing music or movie 44 Turning on the power Setting the speaker system Selecting the input mode Playback ccscccsccssscscsssssccssscsccsescscssessscssecssese 45 Monitoring the input source in the original sound STRAIGHT DECODE mode scescscsssceseee 45 Listening to music with PURE AUDIO MODE 46 KRF V9300D Switching the video resolution 47 Checking the HDMI audio input signal which output from the connected component iPod control ci cesssccisesscccessssacccctcciessaccsscessesscescesaaas Using the menus 4 KRF V9300D KRF V8300D KRF V7300D iPod OperatiOn cccccccssscscccsscscccsssceccscscecesees 49 Play and pause File skip Fast forward and backward Repeat play Shuffle play Switching the display Switching the time information Surround effects Listei MOE wisvccsdccesssscessecssiccoseccecsssvessusenssccsccesses 50 About indicators Surround play using the listen mode 51 Input signals and corresponding listen modes 53 KRF V9300D KRF V8300D Virtual mode 55 DVD 6 channel analog input scccscsseseee 55 Listening to radio broadcasts Tuning into a radio station Using RDS Radio Data System ccsceseseee 56 RDS Auto Memory cccccccscccccscscccoscscsscsesecee 57 Presetting radio stations manually
67. igital audio source recording Operation available only on the main unit of this unit When recording a multi channel digital audio source it is recommended to set up the recording mode properly to convert the digital input into the 2 channel analog output Usually use the A REC Auto record mode However some discs often produce sound skipping The M REC Manual record mode should be used with such a disc YEN o 0 0o0o o oo o Q AUTO MONO INPUT SELECTOR 1 Use INPUT SELECTOR to select the digital input source you want to record The digital input source refers to the source input into the digital input terminals optical and coaxial on the rear panel The input at the CD ASSIGNABLE terminal follows the input assignment setup See lt Input assignment Assignment gt 39 2 Set the MD or TAPE recorder to record 3 Press and hold AUTO MONO for more than 2 seconds to select a recording mode Recording mode Display Operation Recording mode off RecMode Off e digital input record mode is switched off e digital input signals DTS Dolby Digital RecMode or PCM are identified automatically and Auto record mode i Auto converted into stereo signals that are ready or recording e digital input signal type at the moment is mode is selected is held throughout is mode and the signal is converted into stereo signals But once the digital signal is ch
68. ing RDS Radio Data System gt Be sure to connect antennas to receive radio broadcasts See lt Connecting antennas gt 28 MULTI CONTROL Aly BAND AUTO MONO INPUT SELECTOR MULTI CONTROL via 1 Set the input source to TUNER 2 Use BAND to select the broadcast band Each press switches the band as follows FM AM A AUTO MHz STEREO TUNED 3 Use AUTO MONO to select the tuning method Each press switches the tuning method as follows Setting Operation Indicator Auto tuning The next station is tuned automatically AUTO lit Manual tuning Select a station manually AUTO not lit E MHz TUNED Normally set to AUTO auto tuning If the radio waves are weak and there is a lot of interference switch to manual tuning With manual tuning stereo broadcasts will be received in monaural 5 6 KRF V9300D KRF V8300D KRF V7300D 4 Use TUNING lt gt to select the station TUNED lights when a broadcast is being received STEREO lights when a broadcast is being received in stereo MULTI CONTROL w A can also be use to select a station Using RDS Radio Data System RDS is a system that transmits useful information in the form of digital data for FM broadcasts along with the broadcast signal Tuners and receivers designed for RDS reception can extract the information
69. ion Place the microphone at the height of the listener s ears Do not place any obstacle between the microphone and the speakers 3 Enter the Auto Setup mode and start measurement AUTO ROOM EQ wv Use MULTI CONTROL lt gt to select Calibrate ENTER wv Use MULTI CONTROL lt gt to select Start wv ENTER It takes about 2 minutes before the measurement completes The display changes from Calibrating 1 to Calibrating 2 When the measurement completes the display changes to Analyzing indicating that the measurement results are being analyzed In this case go to step 6 If the measurement stopped in the middle and a message is displayed go to step 4 4 Check the message and take an action against the message See lt If a message is displayed gt 34 and check the content of the message and follow the instructions To confirm the measurement data 5 Continue the measurement E If a confirmation message 35 is displayed Use MULTI CONTROL gt to select Continue wv ENTER E If an error message 34 is displayed Use MULTI CONTROL gt to select Retry o ENTER The measurement starts again 6 Auto Setup completes T
70. is selected from 40Hz to 200Hz in10Hz step LFE Low Frequency Effect level LFE Level Low frequency effect signal is used exclusively for giving the field effect of bass tone in the Dolby Digital and DTS signal 1 Select LFE Level SETUP gt MULTI CONTROL lt gt wv ENTER 2 Set the LFE level Use MULTI CONTROL w A to select the LFE level wv ENTER The level is adjusted from 0dB to 10dB in1dB step decrements Input assignment Assignment The input source for the signal output at the CD ASSIGNABLE terminal can be assigned CD VIDEO1 or AUX 1 Select Assignment SETUP wv MULTI CONTROL lt gt wv ENTER 2 Select the input source to be assigned Use MULTI CONTROL v A to select the input Ee wv ENTER Display Setting OPT1 CD Assign CD as the input source OPT1 VIDEO1 Assign VIDEO1 as the input source OPT1 AUX Assign AUX as the input source Audio delay Audio Delay If the monitored video is delayed in time with respect to the audio from the speakers the audio output timing can be delayed 1 Select Audio Delay SETUP wv MULTI CONTROL lt gt wv ENTER 2 Set the delay time Use MULTI CONTROL w a to select the delay time wv ENTER The delay time is adjusted from Oms to 300ms in 10ms step s EEE E
71. isplay Setting Room EQ On The equalizer curve obtained with Auto Setup is used Room EQ Off The equalizer curve obtained with Auto Setup is not used A The speaker setups made with Auto Setup are still active even after Room EQ Off is selected ms EEE English 35 Speaker setup Manual Setup Manual Setup is used to set up the speakers manually or to Large size surround back speakers left modify the setups made with Auto Setup SB Largex2 and right are connected 7 1ch Large size surround back speaker left SB Largex1 only is connected 6 1ch Surround Back SB Normal Average size surround back speakers left speaker and right are connected 7 1ch e SETUP SB Normal Average size surround back speaker left only is connected 6 1ch E ENTER sp off cae speakers are not TTT MULTI CONTROL Return Returns to Setup Menu gt v a 4 Press ENTER to enter the setting i Reference for speaker size os gt da v un Speaker configuration SP Setup Select the use of each speaker and its size 1 Enter the Manual Setup mode SETUP wv Use MULTI CONTROL lt gt to select Manual Setup wv ENTER 2 Select SP Setup MULTI CONTROL lt gt wv ENTER 3 Select the use and size of each speaker Use MULTI CONTROL lt gt to select the sp
72. kHz 0 7 T H D at 6 Q one channel driven 100 W 100 W 1 kHz 10 T H D at 6 Q one channel driven 130W 130W CENTER 1 kHz 0 7 T H D at 6 Q one channel driven 1 kHz 10 T H D at 6 one channel driven SURROUND 1 kHz 0 7 T H D at 6 Q one channel driven 100 W 100 W 1 kHz 10 T H D at 6 Q one channel driven 130W 130W SURROUND BACK 1 kHz 0 7 T H D at 6 Q one channel driven 100 W 100 W 1 kHz 10 T H D at 6 Q one channel driven 008 130W 130W Total harmonic distortion SAR 0 009 1 kHz 50 W 6 Q Lincei 10 Hz 100 kHz 0 dB 3 0 dB PRI REEFEAR 105 dB Input sensitivity impedance CD AUX MD TAPE VIDEO 1 VIDEO 2 550 mV 25 kQ 550 mV 25 kQ DVD 6CH INPUT 550 mV 25 kQ Output level impedance REC OUT MD TAPE VIDEO 1 500 mV 1 KQ PRE OUT SUBWOOFER sssscsssssssssssssssssessessscessecsscescecsees 1 3V 2 2kQ Tone control BASS ia iiias iais 9 dB at 100 Hz TREBLE a 9 dB at 10 kHz DIGITAL AUDIO section Input terminal Optical Coaxial VIDEO section Video format Video Conversion CRIARI A PAL NTSC KRF V9300D KRF V8300D only VIDEO input sensitivity impedance DVD VIDEO 1 VIDEO 2 AV AUX COMPOSItE ssserssserecsesecsssecsssecsesecsssecsssessssessssessssesessees 1Vp p 750 VIDEO output level impedance VIDEO 1 MONITOR COMPOSIIE ssser
73. kes it easy to hear all of the sound track even when listening at low volumes 1 Use MULTI CONTROL lt gt to select Midnight Dolby Digital and DTS mode only When playing a 2 language digital broadcast multiplexed audio broadcast or Dolby Digital multiplexed audio the main audio and sub audio can be switched 1 Use MULTI CONTROL lt gt to select Dual Mono 2 Press ENTER 3 Use MULTI CONTROL w A to select audio 2 Press ENTER 3 Use MULTI CONTROL w A to select DOTrueHD or DOD DTS Display Setting Main Main audio Sub Sub audio Main Sub Main audio Sub audio Stereo Main audio on the L channel Display Setting OOTrueHD Select it when in Dolby True HD mode DOD DTS Select it when in Dolby Digital or DIS mode 4 Press ENTER mi 5 Use MULTI CONTROL w A to select the level Display Setting NIGHT Auto Midnight mode auto NIGHT 1 Midnight mode level 1 NIGHT 2 Midnight mode level 2 NIGHT Off Midnight mode off NIGHT Auto can be selected only when TrueHD is selected in step 3 Sound adjustment Some Dolby Digital or DTS software may not be compatible with the Midnight mode 64 KRF V9300D KRF V8300D KRF V7300D Sub audio on the R channel The non monaural multiplexed audio cannot be switched with this unit Try
74. l Movie Pro Logic IIx Music Pro Logic Il Music Pro Logic IIx Game Pro Logic Il Game Pro Logic Stereo 1 Can be selected only when both the surround back left and right speakers are connected 7 1 channels Pro Logic Il is selected if no surround back speakers are connected 3 Can be selected when one or more surround back speakers are connected Certain listen modes may not be selected depending on the input signal type and speaker setup Ifthe surround effect cannot be obtained or the desirable listen mode cannot be selected check the following setups Speaker setup Input mode setup Audio setup of the player component When a digital signal with a number of channels exceeding the current speaker setup is input the input signal is downmixed automatically according to the current speaker setup Note on input signals 2 or 3 etc in the table under lt Input signals and corresponding listen modes gt indicate the channels encoded in the input signal When an encoded signal is input the input channel indicators on the display panel light as follows 2 1 Ce CR St sr or CL CR st sR 73 5 0 0 E E gt O 0 C E 4 DOO Ow a 2ch LJ R Others Dual Mono LLJ 8 3 0 LJ 2 3 1 7 RI For LFE and S input channel indicators see lt About indicators gt 5Q
75. l the unit farther away from the TV Remote control unit Symptom Cause Remedy Remote control operation is not possible he remote control is not set to the source operation ress the appropriate Input Source key to select the source ode you wish to control you wish to control he remote control has not been changed to the operation Press the DVD key to activate the operation mode for the ode for the Kenwood DVD player you wish to control component you want to control before operation 66 Batteries are exhausted Replace with new batteries 12 c he remote control unit is too far away from the main Operate the remote control unit within the controllable D system controlling angle is too large or there is an range 13 9 obstacle between this unit and the remote gt here is an obstacle between this unit and the remote Remove the obstacle LV control unit 2 Operation is attempted while recording mode is set toon Some funcions cannot control while the recording mode 0 off 80 Resetting the Microcomputer If the unit is completely inoperable the display is not normal or a problem cannot be solved even after checking the list in lt Troubleshooting gt it is required to reset the microcomputer in the unit While holding down 10 key on the unit unplug the power cord and plug it back in Please note that resetting the microcomputer will clear the contents of the memory and return the unit to the state it was in when
76. lable acoustic pressure meter set the meter reading unit to C and adjust the speaker channel levels so that the noise level is 75 dB The adjustment should be performed in the listening position Sets the distance between each speaker and the listening position The actual distances should be measured before starting this setup Distances of speakers Speaker Input channel Distance from the indicator listening position Front speaker left ali meters fee Center speaker Cc meters fee Front speaker right Re meters fee Surround speaker right SR meters fee Surround Back speaker SB meters fee Surround Back speaker right SBR meters fee Surround Back speaker left SBL meters fee Surround speaker left Si meters fee Subwoofer SW meters fee 1 Select SP Distance SETUP wv MULTI CONTROL lt gt wv ENTER 2 Select the unit of distance MULTI CONTROL lt gt wv ENTER Display Setting UNIT Meters Measurement in meters UNIT Feet Measurement in feet Return Returns to Setup Menu 3 Set the distance Refer to the table above for the distance from each speaker to this unit Use MULTI CONTROL lt gt to select the speaker wv Use MULTI CONTROL w A to set the distance The distance can be set in the range of 0 03 to 9 0 met
77. ling frequency and 24 bit quantization the signal of this format can also be reproduced on existing DTS 5 1 channel player components English 69 BunooysajqnoiL DTS HD Master Audio This loss less reversible audio technology has been developed by DTS Corporation and reproduces audio in the same high quality as the studio mastered audio data With 96 kHz sampling frequency and 24 bit quantization it is compatible with max 7 1 channels This technology can be played with any of seven speaker layout patterns making the content producer capable of delivering the intended sound effects in a variety of audio reproduction environments of users DTS HD High Resolution Audio This is an extension of the previous DTS audio format and can record 7 1 chanenl audio with 96 kHz sampling frequency and 24 quantization bits The multi channel sound recorded with DTS HD High Resolution Audio can reproduce details more clearly and realistically than the audio of DVD Video This technology can also be played with any of seven speaker layout patterns making the content producer capable of delivering the intended sound effects in a variety of audio reproduction environments of users DTS HD Low Bit Rate One of the DTS HD audio formats It is the low bit rate for use in communications including the Internet communications HDMI HDMI High Definition Multimedia Interface is a standard developed based on DVI Digital Visual Interface
78. mes with the iPod you are using Certain conditions while using an iPod can cause contents stored on the iPod to be lost Note that Kenwood will not be held liable for any losses arising out of loss of stored contests Displayble characters This unit can display alphanumeric and some symbol characters It displays accented characters after converting them into ordinary alphabet characters The non displayable characters are displayed as asn 3J0J9g Maintenance of the unit When the front panel or case becomes dirty wipe with a soft dry cloth Do not use thinner benzine alcohol etc for these agents may cause discoloration In regard to contact cleaner Do not use contact cleaners because it could cause a malfunction Be specially careful not to use contact cleaners containing oil for they may deform the plastic component English 7 Names and functions of parts Main unit VOLUME CONTROL Before use Led DOLBY HIGH STRAIGHT HDMI LINK READY _ DIGITAL ors DEFINITION DECODE SPEAKERS A B OFF S LISTEN MODE PHONES MULTI CONTROL sun mea gt i SETUP DOLBY VIRTUAL gt n Or 9 9 9 BAND INPUT MODE INPUT SELECTOR AV PURE AUDIO MODE 2 L AUDIO R 000 Q O Power key Standby indicator Press to switch this unit ON or to put it to standby The standby indicator lights in the standby mo
79. mote control unit The displayed text information can be switched as follows Press DISPLAY during play or pause Each press switches the information as follows Information Track name file name Album name Artist name The selected information is scrolled on the display E For the displayable characters on this unit see lt iPod models usable with this unit gt 71 Switching the time information Operation available only on the remote control unit The displayed time information can be switched as follows Press TIME during play or pause Each press switches the information as follows Information File number and elapsed time of the current file File number and remaining time of the current file File number of the current file Total file number of the selected item raow JO disnwI bulked ai English 49 The listen modes provided with this unit allow you to enjoy various surround effects with various video software To enjoy the surround audio in the best condition it is required to set up the speakers in advance 5 1ch surround sound system 7 1ch surround sound system oO MO QO MO a 5 de 6 1ch surround sound system Li Front Leftspeak r SW Subwoofer o Sw C Center speaker R Front Right speaker SL Surround Left speaker SR Surround Right speaker SB Surround Back speaker SBL Surround Back Left speaker S SB
80. n unit the operating method is indicated in illustrations The VOLUME CONTROL MULTI CONTROL and INPUT SELECTOR knobs on the main unit are operated by turning the knobs clockwise or counterclockwise Manual Setup is used to set up the speakers manually or to if vis A Tal Before use 000 e SETUP O0do OO E ENTER CT MULTI CONTROL lt U gt via Speaker configuration SP Setup Speaker setup Manual Setup Select the use of each speaker and its size 1 Enter the Manual Setup mode SETUP Use MULTI CONTROL lt gt to select Manual Setup 3 Select the use and size of each speaker Use MULTI CONTROL lt gt to select the speaker Use MULTI CONTROL A V to set its use or size Repeat the above operations until all of the speakers have been set up Speaker Display Setting SUBW On Subwoofer is connected Subwoofer SUBW Off Subwoofer is not connected FRNT Large Large size front speaker Front speaker FRNT Normal Average size front speaker VE The knob on the main unit is pointed with an arrow to indicate that it can be turned in either direction The keys and controls used in the operations described in each section are indicated with their names The descriptions of the functions available only on the remote control unit are accompanied only with
81. nglish 39 The HDMI setup is required to use the component connected to HDMI HDMI the HDMI terminal or to use the HDMI control functions setup Setup If you do not use the HDMI connection disable the HDMI The HDMI control functions can be set input setup See lt HDMI input setup HDMI Input gt 1 Enter the HDMI Setup mode Emo SETUP 0000 wv O O O e SETUP Use MULTI CONTROL lt gt to select HDMI Setup 0000 OO e ENTER 4 CET MULTI CONTROL ENTER lt gt via 2 Select an item to set MULTI CONTROL lt gt z D HDMI input setup HDMI Input ENTER The HDMI inputs can be enable or disabled individually Enabling Display Setting e rin i sia to set the HDMI function and Audio Out Sets the HDMI audio output destination u unctions Audio Delay Adjusts the deviation in time between 1 Select HDMI Input y the output audio and video HDMI Link Sets whether or not the HDMI control SETUP functions are used Power CTRL Interlocks power ON OFF of components wy by means of HDMI control MULTI CONTROL lt gt Allows the TV to control this unit TV CTRL including the volume levels from the speakers D 4 ENTER Return Returns to Setup Menu This item can be set when HDMI Link is set to On 2 Select an HDMI input source DVD or VIDEO2 and 2 This i
82. o This can be selected when the surround speaker setup is set 1 Set the input source to DVD to off i Dolby Headphone mode 2 Press INPUT MODE and select DVD 6ch IN When using headphones input mode Display saii 3 Play the DvD Dolby H On Sets the Dolby Headphone mode to on Provides the virtual surround effect Dolby H Off Sets the Dolby Headphone mode to off Itis not possible to adjust the speaker level or sound effect of the channels separately when this unit is in the 6ch Input mode Gg EASY SETUP KRF V7300D SETUP SOUND LISTEN MODE ACTIVE EQ and TONE will not be functional Adjust the speaker Inthe virtual modes certain listen modes cannot be selected level with the controls of the DVD player Refer to the Instruction depending on the reproduced signal manual of the DVD players for the detailed operating instructions i The virtual modes are set to off when the sampling frequency is DVD 6 channel play is not available when DVD A V is selected in either 176 4 kHz or 196 kHz the HDMI input setup See lt HDMI input setup HDMI Input gt 49 English 55 Listening to radio broadcasts N Tuning into a radio station This unit can store up to 40 stations in the memory and recall them by one touch operation Radio stations can be classified into RDS Radio Data System stations and other stations To listen to or store RDS stations in the preset memory see lt Us
83. omatically according to the input signal See lt Input signals and corresponding listen modes gt 52 STRAIGHT indicator lights up To cancel Press STRAIGHT DECODE STRAIGHT DECODE mode is also canceled when LISTEN MODE is operated VE When the input mode is 6ch Input the listen mode does not change lt Selecting the input mode gt 44 Ifthe input signal uses a number of channels larger than the number of speakers in use the signals are distributed automatically according to the available speakers sino JO DIsNW bulked is English 45 Listening to music with PURE AUDIO MODE PURE AUDIO MODE turns the display and analog video circuitry other than HDMI off to eliminate their effects on the audio circuitry This mode thereby makes it possible to enjoy audio with higher quality and higher fidelity to the original sound PURE AUDIO MODE PURE AUDIO MODE Car ir ir 0000 0000 0000 0000 Select the music source you want to listen to Start playback from the selected source Press PURE AUDIO MODE When PURE AUDIO MODE is enabled the listen mode is selected automatically according to the input signal See lt Input signals and corresponding listen modes gt 52 ing music or movie WU N Play PURE AUDIO MODE indicator lights up the display will be turned off and no video signal is output to the TV monitor No video signal to th
84. operly E4 Noisy The measurement environment is too noisy Remove the cause of noise before retrying measurement E5 Bad S N The measurement environment is too noisy Retry measurement Do not control the speaker volume during measurement E6 Far SP The speaker is installed too apart Reinstall the speaker E7 DSP A communication error occurred inside the unit Retry measurement If the same error message reappears contact your nearest Kenwood service counter E8 Time Out The measurement took too long time due to a certain cause Retry measurement If the same error message reappears contact your nearest Kenwood service counter Confirmation messages C1 Phase L C1 Phase R The connection polarity of the front left or right speaker is inverted Ensure that the front left or right speaker is connected with correct polarity C1 Phase SL C1 Phase SR The connection polarity of the surround left or right speaker is inverted Ensure that the surround left or right speaker is connected with correct polarity C1 Phase SBL C1 Phase SBR The connection polarity of the surround back left or right speaker is inverted Ensure that the surround back left or right speaker is connected with correct polarity C1 Phase C The connection polarity of the center speaker is inverted Ensure th
85. ponents are connected through the HDMI connection it takes a certain period before the video audio are output because they need mutual authentication Ifthe video and or audio are not output normally turn all of the connected components off then on and try again SUO1 53UUO ini English 1 5 Connecting a TV Monitor 1 Connect the TV monitor by selecting one of the desired method from connections the right page and E shown on w O lt o For the video and audio connections of the connected component see the description on the page for the connected components KRF V9300D and KRF V8300D This unit is capable of up conversion of video signals For KRF V9300D when the TV monitor is connected to this unit through HDMI connection connection B any video signal input to this unit can be output at the HDMI monitor output terminal For KRF V8300D VIDEO and S VIDEO signal can be converted to COMPONENT VIDEO signal connection C For details see lt Video up conversion function gt 8 2 To output the audio of the TV monitor from the speakers connected to this unit Use connection A digital or F analog Use the digital connection connection A to enjoy digital surround broadcasting etc in a surround system environment E The HDMI video cannot be viewed unless the TV monitor is equipped with the HDMI terminal
86. power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions e If the product has been dropped or damaged in any way and f When the product exhibits a distinct change in performance this indicates a need for service g If an abnormal smell or smoke is detected 14 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 15 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition 16 Wall or Ceiling Mounting This product should be mounted to a wall or ceiling only as recommended by the manufacturer 17 Heat This product should be situated away from heat sources such as radiators heat registers stoves or other products that produce heat Do not place a flaming object such as a candle or lantern or near the product 18 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into su
87. pu of the TV monitor is not set properly Confirm the input setup of the TV monitor Anon NTSC PAL video signal is input Set the video setup of the video player component to NTSC PAL Refer to the instruction manual of the video player component is set to on When not recording set the recording mode The HDMI video input is set to Off in the HDMI setup Perform the HDMI setup again by referring to lt HDMI input setup HDMI Input gt 40 PURE AUDIO MODE is set to ON IFPURE AUDIO MODE is set to ON the video circuitry is switched off and only the input HDMI video can be output Set PURE AUDIO MODE to OFF La Display is turned off PURE AUDIO MODE is on While the PURE AUDIO MODE is on the display is turned off Turn off the PURE AUDIO MODE 46 Tuner Symptom Cause Remedy Radio stations cannot be received o antenna is connected Connect an antenna 28 he broadcast band is not set properly Set the broadcast band properly 50 he frequency of the desired station is not tuned Tune in the frequency of the desired station 56 Interference oise due to ignition of an automobile Install the outdoor antenna away from the road oise due to interference from an electric appliance Turn off the power to the appliance oise due to a nearby TV set Instal
88. ram genre you want to listen to Under certain receiving conditions it may take more than 1 minute to complete the search KRF V7300D ENTER MULTI CONTROL lt gt KRF V9300D KRF V8300D 5 5 PTY Preparations Execute the RDS auto memory procedure Set the broadcast band to FM e Tune to an RDS station 1 Press PTY to activate the PTY search mode AUTO STEREO TUNED When an RDS broadcast is received the program type is shown on the display If no PTY data is available or if the station is not an RDS station None is displayed Continued C 2 While the PTY indicator is lit use P CALL Using the DISPLAY key lt lt gt P to select the program type of your choice Operation available only on the remote control unit Program type Display Program type Display op Music Pop M Weather Weather ock Music Rock M Finance Finance Easy Music Easy M children s Program Children DISPLAY Light Classical Music Light M Social Affairs Social Serious Classical Music Classics Religion Religion Other Music Other M hone In Phone In ews News rave Travel Current Affairs Affairs Leisure Leisure ae aion n aa T T n Pressing DISPLAY changes the contents of the Education Educate ation
89. rate an ideal 5 1 channel home theater environment using only a pair of speakers DTS Digital Surround Digital surround format developed by DTS Corporation It features low compression rate and high sound quality and is capable of reproducing max 5 1 channels DTS ES This is a 6 1 channel audio technology developed by adding the surround back channel to DTS Digital Surround The signal of this format can also be played on existing DTS 5 1 channeel components DTS ES consists of two types which are DTS ES Matrix and DTS ES Discrete 6 1 DTS ES Matrix With this format the audio for the surround back channel added to the DTS 5 1 channel audio is allocated to the two surround channels during recording When the signal is decoded the audio for the surround back channel is restored from the surround channels to deliver the 6 1 channel audio DTS ES Discrete With this format the audio for the surround back channel added to the DTS 5 1 channel audio is recorded in an independent channel DTS Neo 6 This is a matrix decoding technology developed by DTS Corporation capable of delivering max 6 1 channels from any 2 channel source It includes two modes including the DTS Neo 6 CINEMA mode optimized for movie playback and the DTS Neo 6 MUSIC mode optimized for music playback DTS 96 24 5 1 channel digital audio format developed as an evolution of the DTS 5 1 channel format It enables high quality playback with 96 kHz samp
90. s the mode as follows When the HDMI input is disabled Display Setting e digital and analog inputs are switched automatically according Full Auto o the input signal When a digital input is detected the decode mode is also switched according to the signal type PCM Dolby igital DTS e input mode is fixed at digital to accelerate the input signal rocessing and eliminate lack of audio at the beginning of playback e decode mode is also fixed according to the type of the signal 0 be played Digital Manual P e analog 6 channel input mode to be selected when playing the VD player connected to the DVD 6CH IN terminal e input mode is fixed at analog is is selected for playback of analog player components 6ch Input Analog 1 6ch Input setting can be selected only when the input selector is set to DVD 6ch In This cannot be selected when in DTS play mode When the HDMI input is enabled Input source is set to DVD or VIDEO2 only Display Setting Signal Auto The decode mode is switched automatically according to the digital 9 signal type PCM Dolby Digital DTS Signal Manual The decode mode is fixed according to the type of the digital signal to be played E The AUTO DETECT indicator lights when Full Auto or Signal Auto is selected sp ZITAL DOD A Ifthe audio is lost as a result of change in the input signal while
91. ssssseosssecsssecsssecsssecsssecsssecsssessssessesesessees 1Vp p 750 S VIDEO input sensitivity impedance DVD VIDEO 2 Y singal soe 1 Vp p 750 C singal na saveesissesaaowens EE 0 286 Vp p 750 S VIDEO output level impedance MONITOR Y singal 1Vp p 750 C singal RR 0 286 Vp p 75Q COMPONENT VIDEO input sensitivity impedance DVD VIDEO 1 VIDEO 2 Y signal 1Vp p 750 CB CR Sigttal csssssessssssssesssssssssssssnssessssssssessnssessesees 0 7 Vp p 750 COMPONENT VIDEO output level impedance MONITOR Y signal 1Vp p 750 CB CR signal ssssssossessessessssssssssssssssesssssessessnssnssesees 0 7 Vp p 750 HDMI section HDMI input terminal DVD VIDEO 2 HDMI output terminal MONITOR FM tuner section Tuning frequency range cscscssscessecessseessseers 87 5 MHz 108 0 MHz AM tuner section Tuning frequency range ccsscccsscsssscsesseeesseecsees 531 kHz 1 602 kHz iPod section Maxmum current drain srsrrrrrrrreresresesresencesencesencenencesenceneso 500 mA General Power consumption KRF V9300D cccsssssssssssscssssesscscsesesesecsssssnsecesesecessecsesesesecenses 275 W KRF V8300D KRF V7300D ccssssesssssssssssssssssssnssssssssessessessnes 255 W Standby power consumption HDMI Link Off less than 0 4W Dimensions KRF V9300D iaia ie W 440 mm 17 5 16 PR H 166 mm 6 9 16 isis D 394 mm 15 1 2 ee W
92. ssssssssscessssssssscerers 2 Unpacking sc000 142 Z IMPORTANT SAFETY INSTRUCTIONS 3 Special Features ccscscsccscscsccscscscecsscccsceseseees 5 How to read this manuall sccscccscsssscccsceesseeee 6 iPod models usable with this unit cs00e 7 Names and functions of parts sccccscscsesseeee 8 CONNECTIONS cccccsccccsssssvceeees 14 29 Setup Setup Menu and its OperatiOns scsccsrseseees 30 KRF V7300D Speaker setup Easy Setup 31 KRF V9300D and KRF V8300D Speaker setup Auto Setup Auto Room EQ cccssccseseee 32 If a message is displayed Setting Room EQ cserrrrerrrerreeseseseeseseeseneceene Speaker setup Manual Setup Speaker configuration SP Setup Speaker level SP Level Speaker Distance SP Distance Other SetupS cccscccssccessscscsccsccsscesesescecesese 38 Subwoofer Remix Subw Re Mix Crossover Crossover LFE Low Frequency Effect level LFE Level Input assignment Assignment Audio delay Audio Delay HDMI SetuD sccccorsscsccccccsccescsccscccsssscccsssoseess 40 HDMI input setup HDMI Input HDMI setup HDMI Setup Audio Out Audio Delay Lip Sync HDMI Link Power Control TV Control TV AUDIO IN TV Audio In Locking the setups Setting Lock 42 Confirming the HDMI function csccceeeee 43 Before operation Confirming the bas
93. switching on the source component Convenient functions VOLUME CONTROL ALS ES et DIMMER KRF V7300D Display dimmer adjustment KRF V9300D and KRF V8300D Operation available only on the remote control unit The dimmer function lets you select the brightness of the display and indicators of this unit You might find this useful if you darken your room to watch movies or listen to music Press DIMMER The brightness of the display changes among the three available settings Select the brightness level you find most pleasing Slightly dark Dark Normal E The brightness of the LED indicators changes in 2 levels Listening with headphones 1 Connect headphones to the PHONES jack 2 Adjust volume E The speaker system will be turned off as the headphones are connected No sound is output from the speakers connected to this unit Muting the sound Operation available only on the remote control unit Press MUTE MUTE indicator blinks Ve INS Aly 7 To cancel Press MUTE again so that the MUTE indicator goes off MUTE can also be deactivated by adjusting volume SUOI DUNy JUaIUaAUOD Pan English 65 Remote control operations for Kenwood DVD players The remote control of this unit can control Kenwood DVD players directly without using the remote control supplied with the
94. t stand tripod bracket or table recommended by the manufacturer Any mounting of the product should follow the manufacturer instructions and should use a mounting accessory recommended by the manufacturer A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn 5 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 6 Power Sources This product should be operated only from the type of power source indicated on the product If you are not sure of the type of power supply to your home consult your product dealer or local power company 7 CAUTION Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit cont
95. t or is interfered with by noise set the audio output of the player component to PCM If AUDIO OUT TV is selected adjust the volume on TV Audio Delay Lip Sync If the monitored video is delayed in time with respect to the audio from the speakers the audio output timing can be delayed 1 Select Audio Delay in lt HDMI setup HDMI Setup gt 40 2 Set the HDMI audio delay MULTI CONTROL v A dd ENTER Display Setting DELAY Auto Corrects the deviation in time between the output audio and video automatically DELAY Manual Allows the user to correct the deviation in time between the output audio and video manually DELAY Off The deviation in time between the output audio and video is not corrected When DELAY Manual is selected use MULTI CONTROL w A to select the audio delay time and press ENTER to enter the setting The delay time is adjusted from Oms to 300ms in 10ms step E e Ifthe TV in use is not compatible with DELAY Auto select DELAY Manual This function selects whether or not the volume control and input selection of this unit are interlocked with the operations of the connected components 1 Select HDMI Link in lt HDMI setup HDMI Setup gt 40 2 Set the HDMI link on or off MULTI CONTROL w A SF PPE ENTER Display Setting HDMI LINK On The HDMI control functions are used HDMI L
96. tem can be set when Power CTRL is set to On its HDMI audio and video inputs 3 Set each item Use MULTI CONTROL lt gt to select the input source DVD or VIDEO2 See next page for each HDMI control item ad Use MULTI CONTROL w A to set the HDMI audio and video inputs wv ENTER Display When in DVD input source Setting When in VIDEO2 source DVD A V Enables the HDMI inputs for both audio and video VIDEO A V Usually select this setting Enables HDMI input only for video na The audio input becomes the digital optical or coaxial or analog audio input The video input becomes the analog video input DVD Off VIDEO S VIDEO or COMPONENT VIDEO terminal VIDEO2 Off and the audio input becomes the digital optical or coaxial or analog audio input 40 KRF V9300D KRF V8300D KRF V7300D Audio Out HDMI Link This function selects whether the output destination of the audio input is the TV or this unit 1 Select Audio Out in lt HDMI setup HDMI Setup gt 40 2 Set the HDMI audio output destination MULTI CONTROL v A yy ENTER Display Setting AUDIO OUT AMP Outputs the audio from the speakers connected to this unit AUDIO OUT TV Outputs the audio from the TV connected to this unit E Audio Out can be set when TV Control is set to off If AUDIO OUT TV is selected and the audio is not outpu
97. th a more natural smoother surround sound field It also offers three modes optimized for each source content including the Movie mode for movie playback the Music mode for music playback and the Game mode for game play Dolby Digital Plus This is an audio technology developed based on Dolby Digital by improving both the sound quality and functions It delivers multi channel surround audio with completely discrete channels The compatible bit rates have been expanded to between 32 kbps and 6 Mbps from between 96 and 640 kbps with Dolby Digital The excellent coding efficiency makes this technology capable of delivering quality audio in max 7 1 channels without affecting the bit rates assigned for the video and other services Compatibility with existing home theater systems incorporating the Dolby Digital technology is also secured Dolby True HD This loss less reversible audio technology has been developed by Dolby Laboratories and reproduces high quality studio mastered audio data perfectly with bit order accuracy It is compatible with up to 7 1 channels when the sampling frequency is 95 kHz and up to 5 1 channels when the sampling frequency is 192 kHz Dolby Headphone This stereo audio technology has been developed by Dolby Laboratories and Lake DSP presently Dolby Australia and features reproduction of surround audio through stereo headphones Dolby Virtual Speaker This is a speaker virtual technology that can gene
98. the INPUT SELECTOR knob of this unit These inputs should be selected using the AV AUX iPod on this unit or the AV AUX or iPod key on the remote control unit The illustrations of the main unit display panel and the examples of operations are shown for the purpose of explanation and may differ from the actual view or operation 6 KRF V9300D KRF V8300D KRF V7300D iPod models usable with this unit To connect an iPod you will need the iPod connection cable PNC iP120 optional accessory This unit does not come with an iPod It is up to you to purchase an iPod separately Controllable iPod As of July 2008 Controllable iPod od 4th Generation Click wheel od mini od 4th Generation Color display od nano 1st Generation od nano 2nd Generation od video iPod 5th Generation od photo od nano 3rd Generation od classic od touch With iPod touch only the Music is compatible Update the software of your iPod to the latest version Some functions of iPod may not work properly depending on the iPod models and the software version This unit supplies power to your iPod which means you can enjoy listening to music while charging your iPod To do this the unit must be turned on Video output setting of iPod such as TV OUT and TV Signal needs to be set on your iPod Handling precautions Be sure to read the instruction manual that co
99. the Kenwood DVD player VOLUME A V keys ON SCREEN key Use to operate the Kenwood DVD player AUTO MEMORY key Press to start auto memory of RDS and FM radio stations EN MUTE key 65 Press to mute the sound temporarily TUNING lt lt gt gt keys Press to select a radio station Press to fast forward fast backward the tracks in the iPod aR Use to operate the Kenwood DVD player 56 Continued C asn aJ0Jag E English 1 1 Names and functions of parts DIMMER key 65 Press to switch the brightness of the display and indicators DISPLAY key Press to display the type and number of channels of the signal input at the HDMI input When the HDMI input is Y enabled 27 5 Press to display the information of the tracks in the iPod v 29 Ss Press to display RDS information 59 eA TIME key 49 Press to display the time information of the tracks in the iPod iPod VIDEO key 48 Press to select video menu of the iPod iPod MUSIC key 48 Press to select music menu of the iPod RANDOM SHUFFLE key Press to switch the shuffle play of the iPod 49 Use to operate the Kenwood DVD player REPEAT key Press to switch the repeat play of the iPod La Use to operate the Kenwood DVD player E For how to be able to use the keys to operate the Kenwood DVD player see lt Remote control operations for Kenwood DVD players gt 66 1 2 KRF V9300D KRF V8
100. the illustration of the remote control unit The descriptions of the functions available only on the main unit are accompanied only with the illustration of the main unit The names of the operated keys are enclosed inside brackets This icon indicates supplementary Z information restrictions in operation or tips on operation When a key is used to select an option the list of options is shown in the form of a table rn pts icon indicates that the description continues on the next page In this manual KRF V9300D is used for the illustrations of front panel and rear panel Playback VOLUME CONTROL VOLUME A V Input source keys am fanta Boon 1 Select the source Use the Input source keys on the remote control unit to select a source Or use INPUT SELECTOR knob or AV AUX iPod key on the main unit 2 Start playback from the selected source The iPod can be controlled from this unit See lt iPod control gt 48 3 Us VOLUME A4 V fo adjust the volume 4 Enjoy various surround effects You can enjoy a variety of listen modes See lt Surround play using the listen mode gt The surround effects can be fine tuned according to the selected input source See lt Adjustments according to the playing source gt 62 The AV AUX and iPod inputs cannot be selected with
101. the tuner 2 Press BAND to set the broadcast band to FM 3 Press AUTO MEMORY to start auto memory After a few minutes up to 40 RDS stations are preset in order from channel 01 Stations already stored in the preset memory may be replaced by RDS stations i e If the RDS AUTO MEMORY function detects 15 RDS stations the stations currently preset at numbers 01 15 will be replaced by the RDS stations Presetting radio stations manually The RDS auto memory function assigns preset numbers to RDS stations starting from preset number 1 Therefore be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations and RDS stations See lt RDS Auto Memory gt MULTI CONTROL Gararot1r lt gt Sd TY MEMORY Il 1 Tune in the station you want to store 2 Press MEMORY while receiving the station ENTER EAIA AUTO MHz STEREO TUNED A i Proceed to step 3 within 20 seconds If more than 20 seconds elapse press MEMORY again 3 Use MULTI CONTROL lt gt to select one of the station presets 1 40 4 Press ENTER to confirm the setting sjse2peoig ope o buruas a Repeat steps 1 to 4 to store as many stations as necessary If you store a station at a previously used preset the previous station will be
102. tist ora genre etc will play all the tracks in the selected item For the iPod models usable with this unit see lt iPod models usable with this unit gt 7 No Data is displayed if there is no data in the selected menu item While the iPod is connected to this unit the iPod can be controlled from this unit or the remote control unit provided with it When the iPod is connected to this unit it cannot be used to control its operations The items in the menu and its order may vary depending on the iPod models Menu example Keys on the remote control unit Use MULTI CONTROL V A to select Press ENTER to o MENU enter the setting Borca m Playlist x ae MUSIC me t List d Artist o Track ST E t List gt M Album Album _ E Re Track t List gt gt Genre o Track i 3 ue i List a gt O Track Hi Artist oe MULTI n d Album CONTROL t Track va Composer i e List M Audiobook Album t Track Podcast H gt aoe dal VIDEO Movies le d t Track Music Videos gt eb Track TVShows gt reni Artist _ i Ghisa 4 Album i E Video Podcasts gt C ea Track Artist oe Album e Track Level 1 Level 2 Level 3 Level 4 Level 5
103. to Room EQ KRF V9300D and KRF V8300D A setup microphone is provided to measure the properties of the listening room and automatically set up the speakers accordingly The automatic setup also includes the tone compensation according to the speaker characteristics and the listening room environment Audio Delay Lip Sync function This function corrects deviation between the video and audio Automatic correction is also available provided that all of the playback component this unit and the TV are connected through HDMI Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories iPod is a trademark of Apple Inc in the United States and other countries anufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 226 616 6 487 535 amp other U S and worldwide patents issued amp pending DTS is a registered rademark and the DTS logos Symbol DTS HD and DTS HD Master Audio are trademarks of DTS Inc 1996 2007 DTS Inc All Rights Reserved HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC asn alojag i English 5 How to read this manual The operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit When the same operation is also available on the mai
104. tor lights up ENTER The level is adjusted from 10 to 10 Bass Boost Operation available only on the remote control unit zuaw3snfpe punos RI The Bass Boost can be adjusted when the input signal is a PCM or analog signal and the listen mode of this unit is set to Stereo and also ACTIVE EQ mode is set to Off Press BASS BOOST Press the key once to select the maximum 10 low frequency emphasis setting TONE will automatically be turned ON To cancel Press BASS BOOST again English 61 Sound adjustment IA Adjustments according to the playing source The audio can be adjusted as desired according to the source being played Cyr tr CD ITIT_IT 0000 OOOO oopol ENTER O O _ SOUND amp L gt MULTI CONTROL PR gt v a 1 Press SOUND to enter the surround adjustment mode 2 Use MULTI CONTROL lt gt to select the item to adjust Display Setting item Range CNTR Center speaker level 10 10dB SR Surround Right speaker level 10 10dB SBR Surround Back Right speaker level 10 10dB SB Surround Back speaker level 10 10dB sI SBL Surround Back Left speaker level 10 10dB sl Surround Left speaker level 10 10dB SUBW Subwoofer level 10 10dB INPUT Input level 6 3 0 i PANORAMA Panorama mode On Off Dimension Dimension 3
105. usts the bass tone in reproduction of Dolby Digital and DTS sources 88 Assignment Assigns the input source to the signal output at the CD ASSIGNABLE terminal on the rear 39 anel Audio Delay Adjusts the deviation in time between the video and audio 39 CN n ___ __ amp ya GG 0 A all models HDMI Input Enables or disables the HDMI input Enabling the HDMI input makes it possible to use the 40 variety of HDMI functions HDMI Setup Audio Out Sets whether the HDMI audio input is output from the speakers connected to this unit or from 41 he TV Audio Delay Adjusts the deviation in time between the HDMI video and audio 41 HDMI Link Switches the HDMI control functions ON OFF Setting this item to ON makes it possible to 41 interlock the power of the TV and this unit Power Control and to control the volume of this unit from the TV TV Control Return Returns to the setup menu TV Audio In Setting this item to ON makes it possible to enjoy digital surround broadcasting etc in the 42 surround environment When this is set to ON the input selector of this unit is automatically switched to OPT 1 when the input of the TV is switched Setting Lock Locks the setups of this unit 42 Exit Exits the setup menu The Easy Setup mode cannot be initiated with the SETUP key Use EASY SETUP key To exit the setup menu Select Exit in the setup menu or press SETUP while in the setup mode

Download Pdf Manuals

Related Search

Related Contents

Product User Manual  Tripp Lite White USB Sync / Charge Cable with Lightning Connector, 6-ft. (1.8M)  VM-10A - セコニック  Recommandations pour l`utilisation des géosynthétiques  Samsung Forno elettrico compatto GEO_COMPACT con funzione di cottura rapida, 1,5 piedi cubi / 42 litri User Manual  R 55(C) R 99(C)  Installation Manual for iPaul Amplifier  1 - La Nordica  

Copyright © All rights reserved. Failed to retrieve file