Kenwood KDC-3034A/G User's Manual
Contents
1. 2 Select the folder level Push the Control knob towards FM or AM With the FM of the Control knob you move 1 level down and with the AM of the Control knob 1 level up Selecting a folder in the same level Push the Control knob towards lt lt or gt gt With the ka a of the Control knob you move to the previous folder and with the gt I of the Control knob to the next folder Returning to the top level Press the 3 button 3 Decide the folder to play Press the Control knob The Folder Select mode releases and the Audio file in the folder being displayed plays Cancelling the Folder Select mode Press the F SEL button Function of the KDC W4534 KDC W4034A AY G GY KDC W434A G KDC W4 1 0A AY G GY KDC W40G KDC W434GY Text Title Scroll Scrolling the displayed CD text Audio file text or MD title Push the Control knob toward FM for at least 2 seconds English 19 Menu system MENU RDS indicator SRC Control knob Menu display Menu System Setting beep sound during operation etc functions The Menu system basic operation method is explained here The reference for the Menu items and their setting content is after this operation explanation 1 Enter Menu mode Press the MENU button for at least 1 second MENU is displayed 2 Select the menu item Push the Control knob towards FM or AM Example When you want to set the beep sou2. In Standby mode Touch Sensor Tone Setting the operation check sound beep sound ON OFF Display Setting BEEP ON Beep is heard BEEP OFF Beep canceled English 21 Menu system In Standby mode Manual Clock Adjustment You can do this adjustment when the lt Synchronize Clock gt page 22 is set as OFF 1 Select Clock Adjustment mode Push the Control knob towards FM or AM Select the CLK ADJ display 2 Enter Clock Adjust mode Press the Control knob for at least 1 second The clock display blinks 3 Adjust the hours Push the Control knob towards FM or AM Adjust the minutes Push the Control knob towards ka a or gt 4 Exit Clock adjustment mode Press the MENU button Function of the KDC W4534 KDC W4034A AY G GY KDC 3034A G KDC W410A AY G GY In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit s clock Display Setting SYNC ON Synchronizes the time SYNC OFF Adjust the time manually It takes 3 to 4 minutes to synchronize the clock Function of the KDC W4534 KDC W4034A AY G GY KDC 3034A G KDC W4 10A AY G GY DSI Disabled System Indicator A red indicator will blink on the unit after the faceplate is removed warning potential thieves Display Setting DSI ON LED flashes DSI OFF LED OFF 22 English Function of the KDC W4534 Selectable Illumination Selecting the button illumina
3. 4 Adjust the Audio item Turn the VOL knob Adjustment Item __ Display Range Bass level BAS L 8 8 Middle level MID L 8 8 Treble level TREL 8 8 Balance BAL Left 15 Right 15 Fader FAD Rear 15 Front 15 Exit Audio Control mode Volume control mode 5 Exit Audio Control mode Press any button Press a button other than the VOL knob SRC 4 and ATT button Audio Setup Setting the Sound system such as Volume offset and Loudness 1 Select the source to adjust Press the SRC button 2 Enter Audio Setup mode Press the VOL knob for at least 1 second 3 Select the Audio Setup item to adjust Press the VOL knob Each time you press the knob the item to be adjusted alternates between the items shown in the table below 4 Adjust the Audio setup item Turn the VOL knob Adjustment Item Display Range Volume offset V OFF 8 0 Loudness LOUD ON OFF Volume offset Sets each source s volume as a difference from the basic volume Loudness Compensates for low and high tones during low volume When Loudness is ON LOUD indicator is ON 5 Exit Audio Setup mode Press the VOL knob for at least 1 second English 9 General features Speaker Setting Fine tuning so that the System Q value is optimal when setting the speaker type 1 Enter Standby Press the SRC button Select the STANDBY display 2 Enter
4. White Rear right output Red Rear right output Red To connect these leads refer to the relevant instruction manuals FM AM antenna input lt O Antenna Cord ISO Antenna Conversion Adaptor ISO JASO Accessory E Fuse 10A gt To external audio unit Portable Audio etc Wiring harness AUX Input adaptor Accessory Accessory r Connect to the terminal that TEL mute wire Brown is grounded when either the telephone rings or during conversation gt iD To connect the Kenwood navigation system consult If no connections are made do snes a your navigation manual not let the wire come out from the tab Power control Motor antenna control wire Connect either to the power Blue White control terminal when using the optional power amplifier or to OS the antenna control terminal in the vehicle Battery wire Yellow Ignition wire Red See next page Y A 7 Pin Red A 4 Pin Yellow a eE Connector A Connector B English 27 Connecting Wires to Terminals Connector Function Guide AWARNING Pin Numbers for Cable Colour Functions Connecting the ISO Connector ISO Connectors The pin arrangement for the ISO connectors depends on the type of vehicle you drive Make sure to make the Yellow Battery proper connections to prevent damage to the unit Blue White ower Control The default connection for t
5. Speaker Setting mode Press the VOL knob 3 Select the Speaker type Turn the VOL knob Each time you turn the knob the setting alternates between the settings shown in the able below Speaker type Display OFF SP OFF For 5 amp 4 in speaker SP 5 4 For 6 amp 6x9 in speaker SP 6 9 6 For the OEM speaker SP OEM 4 Exit Speaker Setting mode Press the VOL knob Switching Display Changing the information displayed 1 Enter Switching Display mode Press the Control knob for at least 1 second DISP SEL is displayed 2 Select the Display item Push the Control knob towards lt lt or gt gt In Tuner source KDC W434A W434G W434GY W40G Information Display Frequency FREQ Clock CLOCK In Tuner source Information Display Program Service name or Frequency FREQ PS FM Radio text Program Service name or R TEXT Frequency FM KDC W4534 only Frequency MW LW FREQ Clock CLOCK 10 English In CD amp External disc source Information Display Disc title In External disc source or KDC D TITLE W4534 W4034A W4034AY W4034G W4034GY W434A W434G W410A W410AY W410G W410GY W40G W434GY internal CD source Track title In External disc source or KDC T TITLE W4534 W4034A W4034AY W4034G W4034GY W434A W434G W410A W410AY W410G W410GY W40G W434GY internal CD source T
6. The disc won t insert Y There s already another disc inserted t Press the 4 button and remove the disc y Direct Search can t be done Y Another function is ON te Turn Random Play or other functions OFF y Track Search can t be done Vv For the discs folders first or last song ts For each disc folder Track Search can t be done in the backward direction for the first song or in the forward direction for the last song 32 English Audio file source Cannot play an Audio file Y The media is scratched or dirty ts Clean the media referring to the CD cleaning of the section on lt About CDs gt page 7 The sound skips when an Audio file is being played Y The media is scratched or dirty ts Clean the media referring to the CD cleaning of the section on lt About CDs gt page 7 Y The recording condition is bad te Record the media again or use another media The Audio file track time isn t displayed correctly v ts There are times when it isn t displayed correctly according to the Audio file recording conditions Supreme does not take effect when it is turned ON Y Little high frequency component te Supreme would not take effect with songs with little high frequency component Y Songs that have not been encoded at bit rates lower than 96 kbps fs 32k 44 1 k 48 kHz or those that have been encoded at a variable bit rate cannot be decoded to reproduce their high
7. above the unit s power will not be linked to the ignition key For that reason always make sure to turn off the unit s power when the ignition is turned off To link the unit s power to the ignition connect the ignition cable ACC red to a power source that can be turned on and off with the ignition key 28 English Installation Installation Metal mounting strap commercially available Firewall or metal support Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place Self tapping screw commercially available Screw M4X8 commercially available Make sure that the unit is installed securely in place If the unit is unstable it may malfunction for example the sound may skip English 29 Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level Upper the frame and pull it forward as shown in the figure Accessory Removal tool 2 When the upper level is removed remove the lower two locations The frame can be removed from the bottom side in the same manner 30 English Removing the Unit 1 Refer to the section lt Removing the hard rubber frame gt page 30 and then remove the hard rubber frame 2 Remove the screw M4 x 8 on the back panel 3 Insert the two removal tools deeply into the slots on each side as sh
8. attached the file which is not the Audio file will play and outputs a loud noise causing damage to the speaker The files with copy protection cannot be played The settings of your encoding software and the environment in which it is used may now allow you o play or view specific audio files For encoding specifications and instructions on how to set encoding software browse through software help or check with he developers Playable MP3 file MPEG 1 2 Audio Layer 3 file Transfer bit rate 8 320 kbps Sampling frequency 8 11 025 12 16 22 05 24 32 44 1 48 kHz Playable WMA file The file in accordance with Windows Media Audio Except for the file for Windows Media Player 9 or after which applies the new functions Transfer bit rate 48 192 kbps Sampling frequency 32 44 1 48 kHz Playable media CD ROM CD R CD RW CD RW discs which are quick formatted by the writing software cannot be used When recording to the maximum media capacity at once the writing software is set to Disc at once Playable disc format ISO 9660 Level 1 2 Joliet Romeo Long file name 6 English The maximum number of characters for display File Folder name 64 Joliet 32 characters MP3 ID3 Tag WMA Contents property 30 characters File Folder name is the number of the characters including the extensions MP3 1D3 Tag can only display the tag of Ver1 0 1 1 Limitation of s
9. sending time data t Receive another RDS station Tuner source Radio reception is poor Y The car antenna is not extended ts Pull the antenna out all the way Y The antenna control wire is not connected t Connect the wire correctly referring to the section on lt Connecting Wires to Terminals gt English 31 Troubleshooting Guide Disc source AUX EXT is displayed without achieving External disc control mode VY Unsupported disc changer is connected te Use the disc changer mentioned in the lt About CD players disc changers connected to this unit gt page 3 of the section on lt Safety precautions gt The specified disc does not play but another one plays instead Y The specified CD is quite dirty t Clean the CD W The disc is loaded in a different slot from that specified te Eject the disc magazine and check the number for the specified disc Y The disc is severely scratched ts Try another disc instead acD ejects as soon as it is loaded Y The CD is quite dirty uy Clean the CD referring to the CD cleaning of the section on lt About CDs gt page 7 Can t remove disc Y The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF te The disc can only be removed within 10 minutes of the ACC switch being turned OFF If more than 10 minutes has elapsed turn the ACC switch ON again and press the Eject button
10. unit with the grooves on the faceplate Projections Grooves 2 Push the faceplate in until it clicks The faceplate is locked in place allowing you to use the unit TEL Mute The audio system automatically mutes when a call comes in When a call comes in CALL is displayed The audio system pauses Listening to the audio during a call Press the SRC button The CALL display disappears and the audio system comes back ON When the call ends Hang up the phone The CALL display disappears and the audio system comes back ON To use the TEL Mute feature you need to hook up the MUTE wire to your telephone using a commercial telephone accessory Refer to lt Connection Wires to Terminals gt page 27 English 11 Tuner features AUTO 1 6 SRC Control knob ST indicator Band display Frequency display Preset station number Tuning Function of the KDC W434A G KDC W40G KDC lt A aoc r r ee lt W434GY Selecting the station Tuning Mode 1 Select tuner source Choose the tuning mode Press the SRC button Press the AUTO button Select the TUNER display Each time you press the button the Tuning 2 Select the band mode alternates between the modes shown in Push the Control knob towards FM or AM he table below Each time you push the knob toward FM it Tuning mode Display Operation switches between the FM1 FM2 and FM3 bands A
11. 3 0 dB 30 Hz 15 kHz Signal to Noise ratio MONO 65 dB Selectivity DIN 400 kHz gt 80 dB Stereo separation 1 kHz 35 dB MW tuner section Frequency range 9 kHz space 531 kHz 1611 kHz Usable sensitivity S N 20dB 25 uV LW tuner section Frequency range 153 kHz 281 kHz Usable sensitivity S N 20dB 45 uV 34 English CD player section Laser diode GaAlAs Digital filter D A 8 Times Over Sampling D A Converter 1 Bit Spindle speed KDC W4534 W4034A W4034AY W4034G W4034GY W434A W434G W434GY W410A W410AY W410G W410GY W40G 1000 400 rpm CLV 2times KDC 3034A 3034G 500 200 rpm CLV Wow amp Flutter Below Measurable Limit Frequency response 1 dB 10 Hz 20 kHz Total harmonic distortion 1 kHz 0 01 Signal to Noise ratio 1 kHz KDC W4534 W4034A W4034AY W4034G W4034GY W434A W434G W434GY W410A W410AY W410G W410GY W40G 05 dB DC 3034A 3034G 93 dB Dynamic range 93 dB MP3 decode KDC W4534 W4034A W4034AY W4034G W4034GY W434A W434G W434GY W410A W410AY W410G W410GY W40G Compliant with MPEG 1 2 Audio Layer 3 WMA decode KDC W4534 W4034A W4034AY W4034G W4034GY W434A W434G W434GY W410A W410AY W410G W410GY W40G Compliant with Windows Media Audio x Audio section Maximum output power KDC W4534 W4034AY W4034GY W434GY W410AY W410GY 50Wx4 KDC W4034A W4034G 3034A 3034G W434A W434G W410A W410G W40G 45 Wx4 Output
12. KENWOOD KDC W4534 KDC W4034A G AY GY KDC W434A G GY KDC W410A G AY GY KDC W40G KDC 3034A G INSTRUCTION MANUAL Kenwoo d Corporation Contents Safety precautions 3 Menu system 20 enu System Notes 4 Security Code Touch Sensor Tone About MP3 and WMA 6 anual Clock Adjustment Synchronize Clock About CDs 7 DSI Disabled System Indicator General features 8 Selectable Illumination Supreme Setting Power ews Bulletin with Timeout Setting Selecting the Source Local Seek Volume Tuning Mode Attenuator AF Alternative Frequency System Q Restricting RDS Region Region Restrict Audio Control Function Audio Setup Auto TP Seek Speaker Setting onaural Reception Switching Display Auxiliary Input Display Setting Dimmer Control Text Scroll Theft Deterrent Faceplate Power OFF Timer TEL Mute CD Read Setting Demonstration mode Settin Tuner features 12 E Tuning Accessories Installation Tuning Mode Procedure 26 Station Preset Memor 2 k F Auto Memory Entry Y Connecting Wires to Terminals 27 Preset Tunin 5 h Installation 29 RDS features 14 Traffic Information Removing the Unit 30 Radio Text Scroll H PTY Program Type Troubleshooting Guide 31 Program Type preset deta Changing Language for PTY Function Specifications 8 CD Audio file External disc control features 17 Playing CD amp Audio file Playing External Disc Fast Forwarding and Reversing Track File Search Disc Search Folder Search Tr
13. MENU button for at least 1 second When MENU is displayed CODE SET is displayed 3 Enter Security Code mode Press the Control knob for at least 2 seconds When ENTER is displayed CODE is also displayed 4 Select the digits to enter Push the Control knob towards ka a or gt gt 5 Select the Security Code numbers Push the Control knob towards FM or AM 6 Repeat steps 4 and 5 and complete the Security Code 7 Confirm the Security Code Press the Control knob for at least 3 seconds When RE ENTER is displayed CODE is also displayed 8 Do the step 4 through 7 step operation and reenter the security code APPROVED is displayed The Security Code function activates Ifyou enter a Code different from your Security Code you have to start over from step 4 Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON 2 Do the step 4 through 7 step operation and reenter the security code APPROVED is displayed Now you can use the unit Ifan incorrect code is entered WAITING is displayed and the input prohibition periods shown in the table below is generated After the input prohibition time lapses CODE is displayed and you can reenter the code Number of times the incorrect code was input 1 pe 2 5 minutes 3 1hour 4 24 hours Input prohibited time
14. Not Load 8 cm 3 in CDs in the CD slot If you try to load a 8 cm 3 in CD with its adapter into the unit the adapter might separate from the CD and damage the unit About CD players disc changers connected to this unit enwood disc changers CD players released in 1998 or later can be connected to this unit Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers CD players ote that any Kenwood disc changers CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit Connecting unsupported disc changers CD players o this unit may result in damage Set the O N Switch to the N position for the applicable Kenwood disc changers CD players The functions you can use and the information hat can be displayed may differ depending on the models being connected A You can damage both your unit and the CD changer if you connect them incorrectly Lens Fogging When you turn on the car heater in cold weather dew or condensation may form on the lens in the CD player of the unit Called lens fogging this condesnation on the lens may not allow CDs to play In such a situation remove the disc and wait for the condensation to evaporate If the unit still does not operate normally after a while consult your Kenwood dealer English 3 Notes If you experience problems during installation consult your Kenwood dealer When yo
15. ack File Disc Folder Repeat Scan Play Random Play agazine Random Play Folder Select Text Title Scroll 2 English Safety precautions AWARNING To prevent injury or fire take the following precautions To prevent a short circuit never put or leave any metallic objects such as coins or metal tools inside the unit Mounting and wiring this product requires skills and experience For safety s sake leave the mounting and wiring work to professionals ACAUTION To prevent damage to the machine take the following precautions Make sure to ground the unit to a negative 12V DC power supply Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing Do not place the faceplate and the faceplate case in areas exposed to direct sunlight excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing To prevent deterioration do not touch the terminals of the unit or faceplate with your ingers Do not subject the faceplate to excessive shock as it is a piece of precision equipment When replacing a fuse only use a new fuse with the prescribed rating Using a fuse with the wrong rating may cause your unit to malfunction Do not use your own screws Use only the screws provided If you use the wrong screws you could damage the unit Do
16. e 20MIN setting further news bulletins will not be received for 20 minutes once the first news bulletin is received The news bulletin volume is the same level that was set for lt Traffic Information gt page 14 This news bulletin function is only available if the desired station sends PTY code for news bulletin or belongs to lt Enhanced Other Network gt Network sending PTY code for news bulletin When the News Bulletin Interrupt function is ON the tuner changes to an FM station In Tuner mode Local Seek Only stations whose reception is good are searched in auto seek tuning Display Setting LO S OFF The local seek function is OFF LO S ON The local seek function is ON Function of the KDC W4534 KDC W4034A AY G GY KDC 3034A G KDC W410A AY G GY In Tuner mode Tuning Mode Sets the tuning mode Tuning mode Display Operation Auto seek AUTO 1 Automatic search for a station Preset station seek AUTO 2 Search in order of the stations in the Preset memory Manual MANUAL Normal manual tuning control Function of the KDC W4534 KDC W4034A AY G GY KDC 3034A G KDC W410A AY G GY AF Alternative Frequency When the reception is poor automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception Display Setting AF ON The AF function is ON AF OFF The AF function is OFF When the AF function is ON t
17. frequency components 1 The messages shown below display your systems condition EJECT NO DISC TOC ERR E 05 BLANK E 15 E 77 HOLD LOAD O TRACK O PANEL o disc magazine has been loaded in the changer The disc magazine is not completely loaded Load the disc magazine properly jo CD in the unit Insert the CD lo disc has been loaded in the disc magazine Load a disc into the disc magazine o disc has been loaded in the disc magazine Load a disc into the disc magazine The CD is quite dirty The CD is upside down The CD is scratched a lot Clean the CD and load it correctly The CD is upside down Load the CD correctly Nothing has been recorded on the MD No tracks are recorded on the MD although it has a title Media was played that doesn t have data recorded that the unit can play Use media that has data recorded that the unit can play The faceplate of the slave unit being connected to this unit has been removed Replace it The unit is malfunctioning for some reason Press the reset button on the unit If the E 77 code does not disappear consult your nearest service center Something is wrong with the disc magazine Or the unit is malfunctioning for some reason Check the disc magazine And then press the reset button on the unit If the E 99 code does not disappear consult your nearest ser
18. functions that can be used and the information that can be displayed will differ depending on the external disc players being connected English 17 CD Audio file External disc control features Fast Forwarding and Reversing Fast Forwarding Hold down toward gt gt with the Control knob Release your finger to play the disc at that point Reversing Hold down toward a with the Control knob Release your finger to play the disc at that point There is no sound while the Audio file is being searched Track File Search Searching for a song on the disc or in the Audio file folder Push the Control knob towards ka a or gt gt Function of the KDC W4534 KDC W4034A AY G GY KDC W434A G KDC W4 1 0A AY G GY KDC W40G KDC W434GY Function of disc changer Audio file Disc Search Folder Search Selecting the disc set in the Disc changer or the folder recorded on the Audio file media Push the Control knob towards FM or AM 18 English Track File Disc Folder Repeat Replaying the song disc in the Disc changer or Audio file folder you are listening to Press the REP button Each time you press the button the Repeat Play alternates between the modes shown in the ables below In CD amp External disc source Repeat play Display rack Repeat TRAC REP isc Repeat In Disc Changer DISC REP OFF REP OFF In Audio file source Repeat play Display File Re
19. g Recalling the stations in the memory 1 Select the band Push the Control knob towards FM or AM 2 Recall the station Press the desired 1 6 button English 13 Function of the KDC W4534 KDC W4034A AY G GY KDC 3034A G KDC W410A AY G GY RDS features TI 1 6 SRC Control knob PTY indicator TI indicator Traffic Information Receiving other traffic information stations a a a Aa A Push the Control knob towards lt lt or Changing to traffic information automatically gt gt when a traffic bulletin starts even when you are not listening to the radio Traffic information can be switched when it is on the Tuner Source However you cannot switch the Traffic information during reception of the Traffic bulletin switched from the source other than the Tuner Press the TI button Each time you press the button the Traffic information function turns ON and OFF When traffic information is ON Tl indicator is ON When a traffic information station is not being received the TI indicator blinks Function of the KDC W4534 When a traffic bulletin starts TRAFFIC is Radio Text S Il displayed and the audio changes to traffic mele Text CrO information Scrolling the displayed radio text Hold down on FM of the Control knob for at During reception of an AM station when the Traffic least 2 seconds Information function is turned ON the frequency changes to an FM s
20. he RDS indicator is ON When no other stations with stronger reception are available for the same program in the RDS network you may hear the incoming broadcast in bits and snatches Turn OFF the AF function in such a case Function of the KDC W4534 KDC W4034A AY G GY KDC 3034A G KDC W410A AY G GY Restricting RDS Region Region Restrict Function You can choose whether or not to restrict the RDS channels received with the AF function for a particular network to a specific region Display Setting REG ON The Region Restrict Function is ON REG OFF The Region Restrict Function is OFF If AF function is not restricted to the specified region and network the AF function sets up to search the station with good reception in the same RDS network English 23 Menu system Function of the KDC W4534 KDC W4034A AY G GY KDC 3034A G KDC W410A AY G GY Auto TP Seek When the Tl function is ON and the reception is poor while listening to a traffic information station another traffic information station with better reception will be searched for automatically Display Setting ATPS ON The Auto TP Seek Function is ON ATPS OFF The Auto TP Seek Function is OFF In FM reception Monaural Reception You can reduce the noise when stereo broadcasts are received as monaural Display Setting MONO OFF The monaural reception is OFF MONO ON The monaural reception is ON Functi
21. he wiring harness is described Red ignition ACC in 1 below If the ISO connector pins are set as described Black Earth Ground in 2 or 3 make the connection as illustrated Connection lease be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc External Power e on deta de 1 Default setting The A 7 pin red of the vehicle s dl Front Ad ISO connector is linked with the ignition and Gray Black Front Right ale a is connected to the constant White Front Left es i i White Black Front Left Ignition cable Red an A 7 Pin Red Green Rear Left Unit Vehicle Green Black Rear Left 2 sE gt Battery cable Yellow A 4 Pin Yellow N The A 7 pin red of the vehicle s ISO connector is connected to the constant power supply and the A 4 pin yellow is linked to the ignition Ignition cable Red A 7 Pin Red gt gt Battery cable Yellow A 4 Pin Yellow Unit paa Vehicle E w The A 4 pin yellow of the vehicle s ISO connector is not connected to anything while the A 7 pin red is connected to the constant power supply or both the A 7 red and A 4 yellow pins are connected to the constant power supply Ignition cable Red A 7 Pin Red Unit ra gt gt Vehicle e Battery cable Yellow A 4 Pin Yellow When the connection is made as in 3
22. imer to turn this unit s power OFF automatically when Standby mode continues Using this setting can save the vehicle s battery power Displa Settin OFF Power OFF Timer function is OFF OFF 20M Turns the power OFF after 20 minutes Original setting OFF 40M Turns the power OFF after 40 minutes OFF 60M Turns the power OFF after 60 minutes E e this setting after setting lt Security Code gt page 21 Function of the KDC W4534 KDC W4034A AY G GY KDC W434A G KDC W410A AY G GY KDC W40G KDC W434GY In Standby mode CD Read Setting When there is a problem with playing a CD with special format this setting plays the CD by force Display Setting CD READ Play CD and Audio file CD READ Play CD by force Setting CD READ2 cannot play Audio file Some music CDs may not play even in the CD READ2 mode Function of the KDC W4534 In Standby mode Demonstration mode Setting Sets the demonstration mode 1 Select the Demonstration mode Push the Control knob towards FM or AM Select the DEMO display 2 Set the Demonstration mode Press the Control knob for at least 2 seconds Each time you press the knob at least 2 seconds the Demonstration mode alternates between the settings shown in the table below Display Setting DEMO ON The Demonstration mode function is ON DEMO OFF Exit Demonstration mode Normal mode English 25 Acce
23. nd select the BEEP display 3 Set the menu item Push the Control knob towards ka a or gt Example When you select BEEP each time you push the knob it alternates between BEEP ON or BEEP OFF Select 1 of them as the setting 20 English You can continue by returning to step 2 and setting other items 4 Exit Menu mode Press the MENU button When other items those applicable to the basic operation method above are displayed their setting content chart is entered Normally the setting listed at the top of the chart is the original setting Also the explanation for items that are not applicable lt Manual Clock Adjustment gt etc are entered step by step Function of the KDC W4534 In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else Once the Security Code is activated the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle Indication of this Security Code activation prevents your precious audio unit from stealing Set the Security Code when the lt Demonstration mode Setting gt page 25 is set to OFF When you activate the Security Code function it cannot be released Note your Security Code is the 4 digit number entered in your Car Audio Passport in this package 1 Enter Standby Press the SRC button Select the STANDBY display 2 Enter Menu mode Press the
24. necting Wires to Terminals gt The TEL mute function turns ON even though the TEL mute wire is not connected Y The TEL mute wire is touching a metal part of the car te Pull the TEL mute wire away from the metal part of the car Even if Loudness is turned ON high pitched tone isn t compensated for Y Tuner source is selected te High pitched tone isn t compensated for when in Tuner source No sound can be heard or the volume is low Y The fader or balance settings are set all the way to one side t Center the fader and balance settings W The input output wires or wiring harness are connected incorrectly t Reconnect the input output wires or the wiring harness correctly See the section on lt Connecting Wires to Terminals gt W The values of Volume offset are low t Turn up the Volume offset referring to the section on lt Audio Setup gt page 9 The sound quality is poor or distorted Y One of the speaker wires is being pinched by a screw in the car t Check the speaker wiring Y The speakers are not wired correctly te Reconnect the speaker wires so that each output terminal is connected to a different speaker The Touch Sensor Tone doesn t sound Y The preout jack is being used ts The Touch Sensor Tone can t be output from the preout jack Even though Synchronize Clock is ON the clock can t be adjusted Y The received RDS station isn t
25. ng the burrs with a ballpoint pen etc CD accessories Do not use disc type accessories CD cleaning Clean from the center of the disc and move outward Ww _4 Removing CDs When removing CDs from this unit pull them out horizontally CDs that cannot be used CDs that are not round cannot be used CDs with coloring on the recording surface or CDs hat are dirty cannot be used This unit can only play the CDs with aise Ges dl This unit may not correctly play discs which do not have the mark You cannot play a CD R or CD RW that has not been finalized For the finalization process refer to your CD R CD RW writing software and your CD R CD RW recorder instruction manual CD storage Do not place CDs in direct sunlight On the seat or dashboard etc or where the temperature is high Store CDs in their cases English 7 General features Release button VOL Control knob ATT DIM Q LOUD indicator SRC ATT indicator Power Turning ON the Power Press the SRC button Turning OFF the Power Press the SRC button for at least 1 second Selecting the Source Press the SRC button Clock display Source required Display Tuner TUNER O Cp External disc Optional accessory CD CH Auxiliary input AUX EXT Standby Illumination only mode STANDBY Function of the KDC W4534 This unit automatically turns full
26. on of the KDC W4534 Auxiliary Input Display Setting Selecting the display when alternating to Auxiliary input source 1 Select Auxiliary input source Press the SRC button Select the AUX EXT display 2 Enter Menu mode Press the MENU button for at least 1 second MENU is displayed 3 Select Auxiliary input display setting mode Push the Control knob towards FM or AM Select the NAME SET display 4 Enter Auxiliary input display setting mode Press the Control knob for at least 1 second The selected Auxiliary input display is displayed 5 Select the Auxiliary input display Push the Control knob towards ka a or gt gt 24 English Each time you push the knob the display alternates as listed below AUX EXT DVD PORTABLE GAME VIDEO TV 6 Exit Auxiliary input display setting mode Press the MENU button When operation stops for 10 seconds the name at that time is registered and the Auxiliary input display setting mode closes Function of the KDC W4534 KDC W4034A AY G GY KDC W434A G KDC W410A AY G GY KDC W40G KDC W434GY Text Scroll Setting the displayed text scroll Display Setting SCL MANU Doesn t scroll SCL AUTO Scrolls when the display changes The text scrolled is listed below CD text Folder name File name Song title Artist name Album name MD title Radio text In Standby mode Power OFF Timer Setting the t
27. own Screw M4X8 commercially available Accessory Removal tool 4 Lower the removal tool toward the bottom and pull out the unit halfway while pressing towards the inside Be careful to avoid injury from the catch pins on the removal tool 5 Pull the unit all the way out with your hands being careful not to drop it Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring Before calling service first check the following table for possible problems General The power does not turn ON Y The fuse has blown te After checking for short circuits in the wires replace the fuse with one with the same rating There s a source you can t switch Y There s no media inserted te Set the media you want to listen to If there s no media in this unit you can t switch to each source Y The Disc changer isn t connected t Connect the Disc changer If the Disc changer isn t connected to it s input terminal You can t switch to an external disc source The memory is erased when the ignition is turned OFF Y The ignition and battery wire are incorrectly connected t Connect the wire correctly referring to the section on lt Connecting Wires to Terminals gt The TEL mute function does not work Y The TEL mute wire is not connected properly t Connect the wire correctly referring to the section on lt Con
28. peat FILE REP Folder Repeat FOLD REP OFF REP OFF Scan Play Playing the first part of each song on the disc or Audio file folder you are listening to and searching for the song you want to hear 1 Start Scan Play Press the SCAN button TRAC SCN FILE SCN is displayed 2 Release it when the song you want to hear is played Press the SCAN button Random Play Playing all the songs on the disc in random order Press the RDM button Each time you press the button Random Play turns ON or OFF When the Random mode is ON DISC RDM FOLD RDM is displayed When you push the Control knob toward b gt the next random song starts Function of the KDC W4534 Function of disc changer Magazine Random Play Play the songs on all the discs in the disc changer in random order Press the M RDM button Each time you press the button the Magazine Random Play turns ON or OFF When the Magazine Random mode is ON MGZN RDM is displayed When you push the Control knob toward gt i the next random song starts Function of the KDC W4534 KDC W4034A AY G GY KDC W434A G KDC W410A AY G GY KDC W40G KDC W434GY Function of Audio file Folder Select Quickly selecting the folder you want to hear 1 Enter Folder Select mode Press the F SEL button FOLD SEL is displayed During Select mode the folder information is displayed as shown below Folder name display Displays the current folder name
29. power DIN 45324 B 14 4V KDC W4534 W4034AY W4034GY W434GY W410AY W410GY 30W x4 KDC W4034A W4034G 3034A 3034G W434A W434G W410A W410G W40G 28W x4 Speaker Impedance 4 80 Tone action Bass 100 Hz 8 dB Middle 1 kHz 8 dB Treble 10 kHz 8 dB Preout level Load during disc play KDC W4534 W4034A W4034AY W4034G W4034GY W410A W410AY W410G W410GY 3034A 3034G 2000 mV 10 kQ Preout impedance during disc play KDC W4534 W4034A W4034AY W4034G W4034GY W410A W410AY W410G W410GY 3034A 3034G lt 600 Q Auxiliary input Using AUX Input Adaptor KDC W4534 only Frequency response 1 dB 20 Hz 20 kHz Input Maximum Voltage 1200 mV Input Impedance 100 kQ General Operating voltage 11 16V allowable 14 4V Current consumption 10A Installation Size W x H x D 182 x 53 x 155 mm Weight 1 4 kg English 35 KENWOOD
30. power OFF after 20 minutes lapses in Standby mode in order to save the vehicle s battery 8 English The time until full power OFF can be set in lt Power OFF Timer gt page 25 Volume Increasing Volume Turn the VOL knob clockwise Decreasing Volume Turn the VOL knob counterclockwise Attenuator Turning the volume down quickly Press the ATT button Each time you press the button the Attenuator turns ON and OFF When the Attenuator is ON the ATT indicator blinks System Q Selecting the best sound setting preset for different types of music 1 Select the source to set Press the SRC button 2 Select the Sound type Press the Q button When you press the button once the current sound setting is displayed Each time you press the button the sound setting alternates Sound setting Display atural NATURAL ock ROCK ops POPS Easy EASY op 40 TOP40 azz JAZZ Change each setting value with the lt Speaker Setting gt page 10 First select the speaker type with the Speaker setting When the value is set up by lt Audio Control gt page 9 USER is displayed Audio Control 1 Select the source to adjust Press the SRC button 2 Enter Audio Control mode Press the VOL knob 3 Select the Audio item to adjust Press the VOL knob Each time you press the knob the item to be adjusted alternates between the items shown in the table below
31. rack number amp Play time P TIME Clock CLOCK In Audio file source Information Display Song title amp Artist name TITLE Album name amp Artist name ALBUM Folder name FOLDER File name FILE Track number amp Play time P TIME Clock CLOCK In Standby Auxiliary input source Information Display Source name SRC NAME Clock CLOCK 3 Exit Switching Display mode Press the Control knob If the contents of the information cannot be displayed Play time is displayed Album name cannot be displayed in WMA file Dimmer Control You can lower the brightness of the display by using the dimmer function Press the DIM button for at least 1 second Each time you press the button for 1 second the Dimmer contol turns ON or OFF When the Dimmer control is ON DIM ON is displayed Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you helping to deter theft Removing the Faceplate Press the Release button The faceplate unlocks allowing you to detach it A The faceplate is a precision piece of equipment and can be damaged by shocks or jolts Keep the faceplate in its faceplate case while detached Do not expose the faceplate and the faceplate case to direct sunlight or excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing Reattaching the Faceplate 1 Align the projections on the
32. rce with constant voltage such as a battery wire the power will not be linked with the ignition i e it will not turn on and off along with the ignition If you want to link the unit s power with the ignition connect the ignition wire to a power source that can be turned on and off with the ignition key If the fuse blows first make sure that the wires have not caused a short circuit then replace the old fuse with one with the same rating Insulate unconnected wires with vinyl tape or other similar material To prevent short circuits also do not remove the caps on the ends of the unconnected wires or the terminals Connect the speaker wires correctly to the terminals to which they correspond The unit may receive damage or fail to work if you share the wires and or ground them to any metal part in the car After the unit is installed check whether the brake lamps indicators wipers etc on the car are working properly lf the console has a lid make sure to install the unit so that the faceplate does not hit the lid when closing and opening Mount the unit so that the mounting angle is 30 or less Connecting Wires to Terminals KDC W4534 KDC W4034A W4034AY KDC W434A W4034G W4034GY W434G W434GY W410A W410AY W410G W40G wat 0GY 3034A 3034G PA ro Steering remote To Steering remote To Kenwood disc changer External optional accessor C Rear left output White Rear left output
33. s characters Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty wipe them with a clean soft dry cloth 4 English Before using this unit for the first time This unit is initially set on the Demonstration mode When using this unit for the first time cancel the lt Demonstration mode Setting gt page 25 About DAB Tuner control KDC W45 34 Refer to A group on the Instruction manual of DAB Tuner KTC 9090DAB optional accessory for the control method of DAB Tuner function However the following control methods of the function for this unit may be differed from the Instruction manual therefore refer to the following supplemental instruction lt Auto Ensemble Memory Entry gt 1 Select the preset band for Auto Ensemble Memory Entry 2 Press the AME button for at least 2 seconds Open Auto Ensemble Memory Entry After storing in the memory finishes the number of the pre set buttons and the ensemble label are displayed lt Searching by programme type and language gt and lt Languages to be displayed gt in lt Programme Type PTY Function gt At the operation to press DISP button use TI button instead This Product is not installed by the manufacturer of a vehicle on the production line nor by the professional importer of a vehicle into an EU Member State Information on Disposal of Old Electrical and Electronic Equipment applicable for EU co
34. splay language 1 Enter PTY mode Refer to lt PTY Program Type gt page 15 2 Enter Changing Language mode Press the TI button 3 Select the language Push the Control knob towards FM or AM Each time you push the knob the language alternates between the languages shown in the table below Language Display English ENGLISH French FRENCH German GERMAN 4 Exit Changing Language mode Press the TI button 16 English CD Audio file External disc control features SCAN RDM REP F SEL M RDM SRC Control knob 3 Disc number IN indicator Track number Playing CD amp Audio file When a disc is inserted Press the SRC button Select the CD display When a CD is inserted the IN indicator is ON Pause and play Press the Control knob Each time you press the knob the audio pauses or plays Eject the CD Press the 4 button Refer to lt About MP3 and WMA gt page 6 for the Audio file by models you can play Play time Function of the KDC W4534 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit Press the SRC button Select the display for the disc player you want Display examples Display Disc player CD CH CD changer MD CH MD changer Pause and play Press the Control knob Each time you press the knob the audio pauses or plays Disc 10 is displayed as 0 The
35. ssories Installation Procedure Accessories ia 1 PASS 2 A E DP ins 1 KDC W4534 only sessessese 1 Installation Procedure A To prevent short circuits remove the key from he ignition and disconnect the terminal of he battery Make the proper input and output wire connections for each unit Connect the wire on the wiring harness Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle Take Connector A on the wiring harness and connect it to the external power connector on your vehicle Connect the wiring harness connector to the unit Install the unit in your car Reconnect the terminal of the battery Press the reset button 26 English A If the power is not turned ON or it is ON but will be OFF immediately the speaker wire may have a short circuit or touched the chasis of the vehicle and the protection unction may have been activated Therefore the speaker wire should be checked If your car is not prepared for this special connection system consult your Kenwood dealer Only use antenna conversion adaptors ISO JASO when he antenna cord has an ISO plug Make sure that all wire connections are securely made by inserting jacks until they lock completely If your vehicle s ignition does not have an ACC position or if the ignition wire is connected to a power sou
36. tation During reception of traffic information the adjusted volume is automatically remembered and the next time the audio changes to traffic information the volume automatically becomes the remembered volume 14 English PTY Program Type Selecting the Program Type and searching for a station 1 Enter PTY mode Press the Control knob During PTY mode the PTY indicator is ON This function cannot be used during a traffic bulletin or AM reception 2 Select the Program Type Push the Control knob towards FM or AM Each time you push the knob the Program Type alternates between the program types shown in he table below No Program Type Display Speech SPEECH 2 Music MUSIC 3 News NEWS 4 Current Affairs AFFAIRS 5 Information INFO 6 Sport SPORT 7 Education EDUCATE 8 Drama DRAMA 9 Culture CULTURE 0 Science SCIENCE 1 Varied VARIED 2 Pop Music POP M 3 Rock Music ROCK M 4 Easy Listening Music EASY M 5 Light Classical LIGHT M 6 Serious Classical CLASSICS 7 Other Music OTHER M 8 Weather WEATHER 9 Finance FINANCE 20 Children s programs CHILDREN 21 Social Affairs SOCIAL 22 eligion RELIGION 23 hone In PHONE IN 24 ravel TRAVEL 25 Leisure LEISURE 26 azz Music JAZZ 2 Country Music COUNTRY 28 a
37. tion color as green or red Display Setting KEY RED The illumination color is red KEY GRN The illumination color is green Function of the KDC W4534 KDC W4034A AY G GY KDC W434A G KDC W410A AY G GY KDC W40G KDC W434GY In CD mode Supreme Setting When MP3 or WMA files encoded at a low bit rate less than 96kbps fs 32k 44 1k 48kHz are played this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate Processing is optimized for the compression format used MP3 or WMA and adjustment is made for the bit rate used Display Setting SPRM ON Plays sound using the Supreme function SPRM OFF Plays the original sound stored in the audio file The sound effect may be imperceptible depending on the relationship between the audio file format and setting Function of the KDC W4534 KDC W4034A AY G GY KDC 3034A G KDC W410A AY G GY News Bulletin with Timeout Setting The tuner automatically changes when a news bulletin starts even if the radio is not being listened to Also you can set the time interval when interruption is prohibited Display and Setting NEWS OFF NEWS 00M NEWS 90M When you set NEWS 00M NEWS 90M the News Bulletin Interrupt function is ON When the news bulletin starts NEWS is displayed and the tuner changes to the news bulletin Ifyou choose th
38. tional Music NATION M 29 Oldies Music OLDIES 30 Folk Music FOLK M 31 ocumentary DOCUMENT Speech and Music include the Program type shown below Music No 12 17 26 30 Speech No 3 11 18 25 31 You can put the Program Type in the 1 6 button memory and for quick recall Refer to the lt Program Type preset gt page 15 You can change the display language Refer to lt Changing Language for PTY Function gt page 16 3 Search for the selected Program Type station Push the Control knob towards ka a or gt gt When you want to search for other stations push aa or gt gt of the Control knob again When the selected Program Type is not found NO PTY is displayed Select another Program Type 4 Exit PTY mode Press the Control knob Program Type preset Putting the Program Type in the Preset button memory and quick recall Presetting the Program Type 1 Select the Program Type to preset Refer to lt PTY Program Type gt page 15 2 Preset the Program Type Press the desired 1 6 button for at least 2 seconds Recalling the preset Program Type 1 Enter PTY mode Refer to lt PTY Program Type gt page 15 2 Recall the Program Type Press the desired 1 6 button English 15 Function of the KDC W4534 KDC W4034A AY G GY KDC 3034A G KDC W410A AY G GY RDS features Changing Language for PTY Function Selecting the Program Type di
39. tructure for the file and the folder Maximum number of directory levels 8 aximum number of folders 100 aximum number of files per folder 255 Playing order of the Audio file The Audio file plays in the order which is written by writing software You may be able to set the playing order by writing the play sequence numbers such as 01 to 99 at the beginning of the file name Example Q Folder Oco Ed d E file DO 1 IO 0 ho L DO 6 dO Playing order Playing order after HO play dO HO HO HO File search Forward file search during HO play Push the Control knob towards gt Pu e Folder search Forward folder search during PO play Push the Control knob towards FM 3 4 e Folder select hen the selection is set to directory 4 and you want to skip to the folder 27 at the same level Push the Control knob towards ka a hen the selection is set to directory 37 moves the level up by folder select Push the Control knob towards AM 2 About CDs Handling CDs Do not touch the recording surface of the CD CD R and CD RW are easier to damage than a normal music CD Use a CD R or a CD RW after reading the caution items on the package etc Do not stick tape etc on the CD or use a CD with tape stuck on it When using a new CD If the CD center hole or outside rim has burrs use the CD only after removi
40. u purchase optional accessories check with your Kenwood dealer to make sure that they work with your model and in your area If the unit fails to operate properly press the Reset button The unit returns to factory settings when the Reset button is pressed Press the reset button if the disc auto changer fails to operate correctly Normal operation should be restored i HE E Reset button The characters which can be displayed by this unit are A Z 0 9 amp lt gt 0 A The RDS feature won t work where the service is not supported by any broadcasting station The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used Therefore what appears on the display in the illustrations may differ from what appears on the display on the actual equipment and some of the illustrations on the display may be inapplicable Cleaning the Unit If the faceplate of this unit is stained wipe it with a dry soft cloth such as a silicon cloth If the faceplate is stained badly wipe the stain off with a cloth moistened with neutral cleaner then wipe it again with a clean soft dry cloth A Applying spray cleaner directly to the unit may affect its mechanical parts Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase
41. untries that have adopted separate waste collection systems Products with the symbol crossed out wheeled bin cannot be disposed as household waste Old electrical and electronic equipment MIA should be recycled at a facility capable of handling these items and their waste byproducts Contact your local authority for details in locating a recycle facility nearest to you Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment The marking of products using lasers Except for some areas CLASS 1 LASER PRODUCT The label is attached to the chassis case and says that the component uses laser beams that have been classified as Class 1 It means that the unit is utilizing laser beams that are of a weaker class There is no danger of hazardous radiation outside the unit English 5 About MP3 and WMA The playable MP3 WMA file hereafter called Audio file and the media format has the following limitation The Audio file which is not comforming to the specification may not play normally or the file and folder names may not display correctly Playable Audio file MP3 WMA KDC W4534 W4034A W4034AY W4034G W4034GY W434A W434G W410A W41 0AY W410G W410GY W40G W434GY A Attach the correct extension for the Audio file MP3 MP3 WMA WMA Do not attach the extensions to files other than the Audio file If the extension is
42. uto seek AUTO 1 Automatic search for a station 3 Tune up or down band Preset station seek AUTO 2 Search in order of the stations Push the Control knob towards ka a or in the Preset memory pp anual MANUAL Normal manual tuning control During reception of stereo stations the ST indicator is ON 12 English Station Preset Memory Putting a station in the memory 1 Select the band Push the Control knob towards FM or AM 2 Select the frequency to put in the memory Push the Control knob towards a a or gt gt 3 Put the frequency in the memory Press the desired 1 6 button for at least 2 seconds The preset number display blinks 1 time On each band 1 station can be put in the memory on each 1 6 button Auto Memory Entry Putting stations with good reception in the memory automatically 1 Select the band for Auto Memory Entry Push the Control knob towards FM or AM 2 Open Auto Memory Entry Press the AME button for at least 2 seconds When 6 stations that can be received are put in the memory Auto Memory Entry closes When the lt AF Alternative Frequency gt page 23 is ON only RDS stations are put in the memory When Auto Memory Entry is done in the FM2 band the RDS stations preset in the FM1 band are not put in the memory Likewise when Auto Memory Entry is done in the FM3 band RDS stations preset in FM1 or FM2 are not put in the memory Preset Tunin
43. vice center The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60 C 140 F stopping all operation Cool down the unit by opening the windows or turning on the air conditioner As the temperature falls below 60 C 140 F the disc will start playing again Discs are being exchanged in the Disc changer READING IN Blink PROTECT NA FILE COPY PRO DEMO The unit is reading the data on the disc The CD player section is not operating properly Reinsert the CD If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted please switch off the power and consult your nearest service center The speaker wire has a short circuit or touches the chassis of the vehicle and then the protection function is activated Wire or insulate the speaker cable properly and press the reset button An Audio file is played with a format that this unit can t support o E A copy protected file is played The Demonstration mode has been selected The lt Demonstration mode Setting gt page 25 is ON Turn it OFF English 33 Specifications Specifications subject to change without notice FM tuner section Frequency range 50 kHz space 87 5 MHz 108 0 MHz Usable sensitivity S N 26dB 20 7 uV 75 Q Quieting Sensitivity S N 46dB 1 6 uV 75 Q Frequency response
Download Pdf Manuals
Related Search