Keating Of Chicago 31920 User's Manual
Contents
1. SERVICE www keatingofchicago com INSTRUCTIONS KEATING OF CHICAGO INC 1 800 KEATING REQUIRED FIELD TEST BEFORE REPLACING MILLIVOLT GRIDDLE THERMOSTATS KEATING PART 037088 amp KEATING PART 023897 1 Make sure that the thermostat capillary and bulb are completely protected by the shield except for 1 not including the swedge at the end of the thermostat bulb See Note 1 2 Make sure that the thermostat shield extends to the front edge of the plate and that the capillary goes through the formed end of the shield See Note 2 3 Make sure that the bolts which hold the thermostat bulb and shield in place do not touch the thermostat bulb See Note 3 4 Make sure the capillary bulb is completely touching the bottom surface of the griddle plate DO NOT TIGHTEN THE BOLTS ON THE THERMOSTAT SHIELD MORE THAN FINGER TIGHT AND 1 4 TURN OR THEY WILL CRUSH THE THERMOSTAT BULB 5 Make sure that on part 037088 thermostat the insulation has been moved up the capillary and starts at the beginning of the thermostat bulb See Note 4 WARNING Disassembling the thermostat will void the thermostat warranty REQUIRED TEST EQUIPMENT Multimeter for testing continuity 6 CHECKING CONTINUITY WITH THE MULTIMETER A Rotate the thermostat shaft until an audible click is heard B Rotate the thermostat shaft left and right ten times causing the switch to click on and off ten times while using the Multimeter to verif2. y continuity C If the switch does not show continuity during all ten trials replace the thermostat Part 031920 ECO 2537 REV 0 11 24 98 THERMOSTAT k BULB _ NOTE 1 a TOP VIEW we BRACKET gt Se l yai Oes TO THERMOSTAT __ FRONT OF THE PLATE HOUSING a FABRIC THERMOSTAT SU ATION CAPILLARY FRONT VIEW GRIDDLE mE THERMOSTAT BULB METAL SHIELD NOTE 3 milvitGrddiIThrmsts11 98
Download Pdf Manuals
Related Search