Kawasaki 840014 User's Manual
Contents
1. Make sure the extension cord being used is in good condition If there are any cut or nicks no matter how deep in the insulation DO NOT use that cord Also make sure the extension cord is heavy enough to carry the current needed by the Pad Sander see ELECTRICAL REQUIREMENTS DO NOT use small around the house lamp extension cords These cords can easily overheat and or catch fire when used with power tools PERSONAL SAFETY A WARNING Stay alert watch what you are doing and use common sense when operat ing a power tool Do not use tool while tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Dress properly Do not wear loose clothing or jewelry Contain long hair Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts Avoid accidental starting Be sure switch is off before plugging in Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents Remove adjusting keys or wrenches before turning the power tool ON A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance at all times Proper footing and balance enables better control of the power tool in unexpected situations Use safety equipment Always2. misapplication misuse abuse accidents operation at other than recommended pressures or temperatures improper storage or freight damage Parts damaged or worn by operation in dusty environments are not warranted Failure to follow recommended operating and maintenance procedures also voids warranty This limited warranty does not apply to accessory items such as drill bits screwdriving bits circular saw blades jigsaw blades grinding wheels sanding sheets and other related items DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING ACCIDENT ABUSE NEGLIGENCE FAILURE TO FOLLOW INSTRUCTIONS UNAUTHORIZED REPAIRS OR ALTERATIONS DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY Alltrade will not be liable for the following labor charges loss or damage resulting from improper operation maintenance or repairs made by other persons pre delivery services such as assembly oil or lubricants and adjustment maintenance services that are normally required to maintain the product The use of other than genuine Alltrade Repair Parts will void warranty 14 Warranty Disclaimers EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE ALL OTHER EXPRESS WARRANTIES GUARAN
3. 0 eee ee 2 INTENDED USE llaa 2 SECTION ONE GENERAL SAFETY RULES FOR ALL ELECTRIC POWER TOOLS 2 RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS 2 3 IMPORTANT SAFEGUARDS 000 e eee eee 3 WORK AREA 2 siioni ae dab atae wondered deal 4 ELECTRICAL SAFETY 2 23 00 eb eiy Mtoe Mee eee ed 4 PERSONAL SAFETY i403 40 2ibecuhovns ar ileee Knee inati 5 TOOL USE AND CARE cece eee 5 6 SERVICE a cctctony esa bas pine Meg ceh emir eke eee ne eee 6 SECTION TWO SPECIFIC SAFETY RULES AND OR SYMBOLS 6 IMPORTANT SAFETY RULES FOR PAD SANDER 6 7 SYMBOLS ssri uero ea ha eee Mec bee ies 7 SECTION THREE FUNCTIONAL DESCRIPTION 2 cc cece eee eee 8 ASSEMBLY iiser Gidea daw eda bene diweraeeeae dy atewk gonad 9 INSTALLING THE SANDPAPER ooann 9 10 OPERATING THE PAD SANDER 2 000 a 10 11 SECTION FOUR MAINTENANCE AND CLEANING onoono 11 ACCESSORIES cient eens 12 SPECIFICATIONS 0 eens 12 OTHER CONSUMER DO IT YOURSELF DIY TOOLS 12 SECTION FIVE 2 YEAR LIMITED WARRANTY 0 e cece eee 13 16 CONGRATULATIONS Thanks for choosing this product At Alltrade our aim is to provide you with quality products at an affordable price and we want you to be totally satisfied with your product and our Customer Service If any help and advice is needed please contact us at 1 800 590 3723 Properly cared for this tool will give you many year
4. Volts Voltage Potential A Amperes Current FIGURE 1 Hz Hertz Frequency Cycles per Second PAD SANDER COMPONENTS WwW Watt Power Kg Kilograms Weight CONTROLS AND COMPONENTS N Alternating Current Type of Current 1 On Off Switch me Direct Current Type of Current 2 Motor Housing m Alternating or Direct Current Type of Current 3 Power Cord Earthing Terminal Grounding Terminal 4 Dust Collector o Class II Construction Denotes Double Insulation 5 Bottom Backing Pad min Minutes Time 6 Sandpaper Clamp 2 S Seconds Time 7 Sandpaper Punch Plate E a ASSEMBLY 4 nes ___ The Pad Sander i bled a 7 H if using the Dust n No load Rotational e Pad Sander is assembled and ready for use However if using the Dus a w ae apse l a Dt tonal apered Collection System the Dust Collector must first be attached the sander min Revolutions per Minute Revolutions Surface Speed Strokes etc per Minute 1 Attach the Dust Collector bag to the rear of the Pad Sander There is a rubber 1 2 3 Ring Selector Settings Speed Torque or Position Settings O ring on the Collector nozzle This maintains a secure fit into the sander Dust Collection Bag Push all the way in for a snug fit FIGURE 2 ATTACHING THE DUST COLLECTION BAG 2 Push the Dust Collector all the way into the opening at the rear of the sander The collector should fit snug in the adapter If the collector is not held firmly in place replace the O ring INSTALLING TH
5. wear eye protection Dust mask non skid safe ty shoes hard hat or hearing protection must be used for appropriate conditions TOOL USE AND CARE A CAUTION Use clamps or other practical ways to secure and support the workpiece to a stable platform Holding the work by hand or against your body is unstable and may lead to loss of control Do not force tool Use the correct tool for your application The correct tool will do the job better and safer at the rate for which it is designed Do not use the tool if the power switch does not turn it ON or OFF Any tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the power cord plug from the power source before making any adjustments changing accessories or storing the tool Such preventive safe ty measures reduce the risk of starting the tool accidentally Store idle tools out of reach of children and other untrained persons Tools are dangerous in the hands of untrained users Maintain tools with care Keep cutting tools sharp and clean Properly main tained tools with a sharp cutting edge are less likely to bind and are easier to control Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the tool s operation If damaged have the tool serviced before using Many accidents are caused by poorly maintained tools Use only accessories that are recommended by the manufa
6. which if not avoided may result in property damage NOTE NOTE provides additional information that is useful for proper use and maintenance of this tool If a NOTE is indicated make sure it is fully understood IMPORTANT SAFEGUARDS A DANGER People with electronic devices such as pacemakers should consult their physician s before using this product Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker WARNING Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm Some examples of these chemicals are e Lead from lead based paints e Crystalline silica from bricks and cement and other masonry products and arsenic and chromium from chemically treated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as dust masks that are specially designed to filter out microscopic particles WARNING Handling the power cord on this product may expose you to lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE A WARNING
7. E SANDPAPER INSTALLING THE SANDPAPER The Pad Sander uses 1 4 sheet size sandpaper It is held in place by two clamps on each end of the sander Depress the clamp release lever on one end and slide the sandpaper under the clamp Repeat for the other end to complete installing sandpaper ABRASIVE DISKS Only use Abrasive Disks hav ing a hook and loop fastening system and with holes that match the holes on the bot tom of this sander samme Sandpaper Clamp Release Lever Sandpaper FIGURE 3 INSTALLING THE SANDPAPER USING THE PAD SANDER WITH THE DUST COLLECTION SYSTEM In order to make full use of the Dust Collection System the sandpaper must have holes matching those in the Bottom Foam Pad 4 If there are no holes in the sandpaper install the sandpaper using the clamps on both ends of the Pad Sander 2 Place the Punchplate under the sander with the two tabs in the front Collection 3 Press the sander down E Bag firmly on the Punchplate until the holes are a punched S p 4 The sander is now ready to use FIGURE 4 USING THE SANDPAPER PUNCHPLATE OPERATING THE PAD SANDER 4 WARNING Disconnect the power plug from the AC power source before any assembly adjustments or adding removing accessories Following this preventative step reduces the risk of the sander coming on accidentally and the risk of damage to the workpiece and injury to the operator NOTE Remove components from carton and examin
8. FOR CUSTOMER SERVICE POUR LE SERVICE APRES VENTE OU DU CONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR 1 800 590 3723 Printed in China Kawasaki Kawasaki Motors Corp U S A OFFICIAL LICENSED PRODUCT 87 1904 60957 KAWASAKI IS A TRADEMARK LICENSED BY KAWASAKI MOTORS CORP U S A WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT CONSUMER INQUIRES SHOULD BE DIRECTED TO COPYRIGHT 2006 ALLTRADE TOOLS LLC 1431 VIA PLATA LONG BEACH CA 90810 1462 USA 840014 1 4 Sheet Black Palm Grip Sander_Rev 9 18 06 MODEL Kawasaki _ 1 4 SHEET PALM GRIP SANDER INSTRUCTION MANUAL THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY OPERATION MAINTENANCE AND STORAGE OF THIS PRODUCT BEFORE USE READ CAREFULLY AND UNDERSTAND ALL CAUTIONS WARNINGS INSTRUCTIONS AND PRODUCT LABELS FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND OR PROPERTY DAMAGE IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1 800 590 3723 BEFORE YOU CALL HAVE THE FOLLOWING INFORMATION AVAILABLE MODEL No DATE PURCHASED AND STORE LOCATION AN ALLTRADE REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE IF YOU WOULD LIKE TO MAKE A SUGGESTION OR COMMENT GIVE US A CALL OR EMAIL US AT INFO ALLTRADETOOLS COM YOUR FEEDBACK IS VITAL TO US TABLE OF CONTENTS CONGRATULATIONS 0
9. Keep your work area clean and well lit Cluttered work benches and dark work areas may Cause accidents or injury Do not operate power tools in explosive areas such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep bystanders children and visitors away while operating a power tool Distractions can cause you to lose control ELECTRICAL SAFETY A WARNING Double insulated tools are equipped with a polarized plug one blade is wider than the other This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician to install a polarized outlet Do not change the plug in any way Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system Avoid body contact with grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is grounded Do not abuse the cord Never use the cord to carry the tool or pull the plug from an outlet Keep the cord away from heat oil sharp edges or moving parts Replace damaged cords immediately Damaged cords increase the risk of electric shock When operating the tool outside use an outdoor extension cord marked W A or W These cords are rated for outdoor use and reduce the risk of elec tric shock
10. TIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE BUYER ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE NO WARRANTY ORAL OR WRITTEN OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT ALL EXPRESS AND OR IMPLIED WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE PURCHASER INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE
11. WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE Limitation Of Liability IN NO EVENT SHALL ALLTRADE AND OR ITS REPRESENTATIVE S BE LIABLE FOR INDIRECT INCIDENTAL SPECIAL AND OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELATED TO DIRECTLY OR INDIRECTLY ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND OR ITS REPRESENTATIVE S AND PURCHASER ANY WARRANTY HEREUNDER AND OR THE EXISTENCE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF ANY ITEM S SOLD HEREUNDER EVEN IF ALLTRADE AND OR ITS REPRESENTATIVE S HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH 15 DAMAGES IN NO EVENT WHETHER AS A RESULT OF A BREACH OF CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE OR OTHERWISE SHALL ALLTRADE S AND OR ITS REPRESENTATIVE S LIABILITY EXCEED THE PRICE OF THE PRODUCT ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE Limitations on Warranty Disclaimers Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages so part or al
12. cts can damage the plastic parts of the tool 11 Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one tool may become hazardous when used on another tool Always attach grounded 3 prong extension cords to grounded 3 hole outlets If you must use an extension cord be sure that the gauge is large enough to carry the amount of current necessary for your power tool If not your tool may experi ence a loss of power excessive voltage drop or overheating The smaller the gauge number the heavier the cord see table on next page RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS TOOL CURRENT RATING CONDUCTOR SIZE IN A W G AMPERE 10FT 25FT 50FT 100FT 3 6 18 18 18 18 6 8 18 18 18 16 8 10 18 18 18 14 10 12 16 16 14 14 12 16 14 12 12 16 20 12 12 12 SPECIFICATIONS SPECIFICATIONS Voltage 120V uo 60 Hz Rated Current 1 3A Diameter of Orbit 1 587mm 1 16 No Load Speed 10000 min OTHER CONSUMER DO IT YOURSELF DIY TOOLS Alltrade offers a full range of Kawasaki tools that make DIY jobs easy If you would like further information on the following products please contact Alltrade Customer Service Department at 1 800 590 3723 Cordless Drills Screwdrivers Reciprocating Saws Impact Wrenches Routers Sanders Rotary Tools Jigsaws Corded and Cordless Multi Purpose Tools Circular Saws Angle Grinders Wide Range of Accessories and m
13. cturer for your model Accessories that may be suitable for one tool may create a risk of injury when used on another tool Tool service must be performed only by qualified repair personnel Service or maintenance by unqualified personnel could result in a risk of injury When servicing a tool use only identical replacement parts Follow instructions in the Maintenance section of this manual Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury SPECIFIC SAFETY RULES AND OR SYMBOLS 4 CAUTION Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring Contact with a live wire will also make exposed metal parts of the tool live and shock the operator IMPORTANT SAFETY RULES FOR PAD SANDERS A WARNING Before starting sanding operations with the Pad Sander you should become very familiar with the operation of the tool If unsure about using the sander for various operations obtain advice from a qualified person or contact Alltrade Customer Service Always secure working material before attempting to use the Pad Sander Never hold the material with your free hand or across your legs Small or thin material may flex or vibrate causing loss of control of the tool possibly resulting in injury Before turning the Pad Sander ON make sure the work area is free of other tools wood scraps and other debris Do no
14. e contents carefully Do not discard carton and packing until components are examined 10 USING THE PAD SANDER 1 Prepare the workpiece according to instructions in this manual Hold the Pad Sander firmly by the top Always sand ina 2 Plug the sander into an approved l circular motion power source 3 Turn on the sander by depressing the ON OFF switch on the front 4 Hold the sander against the work piece with a firm grip 5 Sand the workpiece in a circular motion Using a straight in line motion can cause uneven patterns to result FIGURE 5 USING THE PAD SANDER CAUTION Do not hold the Pad Sander in one spot for prolonged periods This can cause the sander to overheat as well as causing scorching on the workpiece Damage to the Pad Sander and workpiece could result 4 CAUTION Always wear approved safety eyewear and appropriate dust filters or respirators when using this tool MAINTENANCE AND CLEANING 4 WARNING CLEANING To avoid accidents be sure to disconnect the tool from the electrical power source before any cleaning or maintenance The tool can be cleaned by using compressed dry air If compressed air is not available a soft natural bristle paint brush will work Always wear safety gog gles when cleaning tools with compressed air CAUTION Avoid using certain cleaning agents and solvents Chemicals like gasoline carbon tetrachloride acetone paint thinner or ammo nia produ
15. l of the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If your product is not covered by this warranty please call our Customer Service Department toll free at 1 800 590 3723 for general repair information and charges 16
16. ore 2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to Original Retail Buyer Alltrade Tools LLC hereinafter Alltrade expressly warrants to the original retail purchaser of the accompanying KAWASAKI portable power tool and no one else all parts of the product except those parts referred to below which are specifically excluded from such warranty see Exclusions to be free from defects in materials and workmanship for a period of two years from original date of purchase SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS This Kawasaki portable power tool is offered as a home use tool and carries a HOME USE WARRANTY This tool is made for home use in the execution of projects and repairs in and around the home Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty The date of purchase shall be the date of shipment to the original purchaser or the date the original purchaser took possession custody or control of the product whichever occurred first This warranty shall be null and void if the product or any component thereof is modified altered or used for any commercial purpose or on a jobsite This warranty does not apply to any other product and or component thereof manufactured or distributed by Alltrade and does not apply to products and or components thereof designed manufactured and or assembled by others for which Alltrade makes no warranties what
17. s of satisfaction INTENDED USE This tool is intended for consumer use only This tool is not designed for profes sional use The power cord should only be used in approved electrical outlets as described in this manual GENERAL SAFETY RULES FOR ALL ELECTRIC POWER TOOLS 4 WARNING READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating maintaining and cleaning power tools Always use common sense and pay particular attention to all the DANGER WARNING CAUTION and NOTE statements of this manual A This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER indicates an imminently hazardous situation which if not avoided will result in death or serious injury 4 DANGER WARNING indicates a potentially hazardous situation which if not avoided could result in death or serious injury A WARNING A CAUTION CAUTION indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION used without the safety alert symbol indicates a potentially hazardous situation
18. soever THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF Warranty Performance By purchasing the product purchaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any such nonconforming item and or part is promptly returned to Alltrade s facility postage pre paid and insured address ALLTRADE Warranty Claims amp Repair 1431 Via Plata Long Beach CA 90810 Attn Customer Service 1 800 590 3723 within the applicable warranty period with a written request by purchaser that Alltrade repair and or replace the nonconforming item and or part We recommend that you keep the original product packaging in the event you need to ship the unit We suggest the package be insured against loss or in transit damage When sending your product include your name address phone number dated proof of purchase or copy and a statement about the nature of problem Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate written proof that they are the original purchaser and of the original purchase date Parts returned freight prepaid and insured to Alltrade s facility see above address will be inspected and at Alltrade s option repaired and or replaced free of charge if found to be defective and subject to warranty Alltrade retains the
19. sole discretion to determine whether any item or part is nonconforming and if so whether the 13 item and or part will be repaired and or replaced If the unit is repaired new or reconditioned replacement parts may be used If Alltrade chooses to replace the product it may replace it with a new or reconditioned one of the same or comparable design The repaired or replaced unit will be warranted under the terms of the remainder of the warranty period Typically a defective product that is returned within the first 30 days after the purchase date will be replaced for items returned after the first 30 days and within the warranty period covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced at Alltrade s option During the warranty period Alltrade will be responsi ble for the return shipping charges Alltrade s repair and or replacement of any non conforming item and or part thereof shall constitute fulfillment of all obligations to the purchaser Alltrade shall not be responsible or liable for any expense including freight charges or repairs made outside Alltrade s facility unless expressly agreed to by Alltrade in writing Under no circumstances shall Alltrade bear any responsibility for loss of the unit loss of time or rental inconvenience commercial loss or consequential damages Exclusions This warranty does not cover parts damaged due to normal wear abnormal conditions
20. t use the pad sander for wet sanding or liquid polishing operations This could result in damage to the Pad Sander and or electrical shock resulting in serious injury or even death to the operator Inspect the work area thoroughly and remove ALL protruding nails staples and other foreign materials Sanding over these objects will tear the sandpaper and damage the bottom backing pad of the sander FUNCTIONAL DESCRIPTION A WARNING Turn OFF the Pad Sander and disconnect it from the AC power source before making any adjustments or changing sandpaper sheets Keep the handle clean dry and free from oil and grease When cleaning the Pad Sander DO NOT use solvents containing carbon tetrachloride or ace tone Never use gasoline paint thinner or products containing ammonia These chemicals can damage the plastic parts of the tool Always wear safety goggles or other approved eye protection when using this tool Always use an appropriate dust mask or respirator during operations where dust can be generated To reduce exposure to these chemicals always 4 work in a well ventilated area Use approved safety equipment and dust masks that are specially manufactured to filter out microscopic particles SYMBOLS IMPORTANT Some of the following symbols may be used on your tool Please study them and learn their meaning Proper interpretation of these symbols will allow you to operate the tool better and safer SYMBOL NAME EXPLANATION V
Download Pdf Manuals
Related Search