Kathrein UFE 371/S User's Manual
Contents
1. waveband and 470 862 MHz in the UHF waveband The BZD 30 has almost omnidirectional characteristics so exact orientation is not necessary Depending on how it is installed both vertical and horizontal polarisation can be received The remote feeding 5 V 30 mA is provided by the connected DVB T receiver via the antenna output e g Kathrein UFD 570 S KATHREIN Euroline UFE 370 S or 371 S This antenna is further characterised by its extremely low noise factor and it has a stop filter for GSM interference With its shapely style and small size 140 x 195 mm this antenna takes up little space and suits any kind of furniture The accessories supplied include a foothold for simple placement a wall bracket with mounting material and a 2 m connection cable 33 34 35 936 2637 A 0705 ZWT Technical alterations reserved Internet http www kathrein de EH ER E KATHREIN Werke KG Phone 49 8031 184 0 Fax 49 8031 184 306 Antennen Electronic Anton Kathrein Stra e 1 P O Box 10 04 44 83004 Rosenheim Germany2. keys If you use a DVB T indoor antenna e g the Kathrein BZD 30 the antenna must receive a supply voltage of 5V unless the antenna has its own power supply The standard setting is 5V OFF inactive you can use the lt gt keys to switch the power supply on 5V ON active Confirm your entry with the OK key The receiver now skips automatically to the Programme search menu and starts the automatic programme search of the entire frequency range The programmes channels which the receiver has found are stored in the pre set programme list You can use the w keys to change between the channels as usual 10 Operation Programme Selection TV and Radio The receiver is preassigned for the most common programmes Your terrestrial antenna must accurately aligned to achieve proper reception Press the OK key to call up the list of existing programmes TV List 2 Baysrisches FS 3 BR alpha A Y TV TV List Radio Radio List FAV Fav List Select the programme using the keys and press the OK key Note You may also call up the programme list by pressing the OK key Straight away To select enter the programme number using the numeric keypad on the remote control Press the TV R key to switch from the TV list to the radio list and press FAV key to call up the favourite programme list 4 lists You can skip from page to page of these lists using the Quality P Recall P or lt gt keys Wh
3. A Y Exit Back OK Sub Menu View Choose one of the two games listed Note When you have selected a game please follow the on screen notes All games are controlled with the keys shown below SS 28 Games Tetris Snake 29 Functions and Technical Data Reception of free digital terrestrial TV and radio programmes 1000 Programme memory positions Electronic Programme Guide EPG showing information on the current and the succeeding programmes of the next few days 8 Timers programmable also via EPG Software update for operating software via RS 232 serial interface On Screen Display OSD in five languages D GB ESP CZ Videotext conversion display on TV set Automatic 4 3 and 16 9 format recognition Manual entry of PID data Automatic date and time setting via DVB data stream Programme scan TV SCART socket with composite colour and RGB signals VCR SCART socket with composite colour signal Video audio output via cinch sockets S VHS output Digital audio output SPDIF format Radio key Antenna level display visual and acoustic Volume control and mute function 4 digit LED display An active indoor antenna e g Kathrein BZD 30 can be operated without a separate mains adapter IR remote control Power switch 230 12 V power supply unit for stationary use in scope of delivery display of information only if broadcast by the programme provider 30 Functions and Technic
4. AT Ba 2 Operating Instructions DVB I Receiver UFE 3 1 S ec nr TEN PS s a s am S Sm x ES SS 38 a E E w www a gt gt gt gt gt EM a ar Z Z w w w KATHREIN Antennen Electronic Preface Important Notices Dear Customer These operating Instructions will help you make optimum use of the many functions of your new DVB T receiver We have made the operating instructions as easy as possible to understand and as short as possible For environmental protection we have equipped a power switch Switch off your receiver to save electricity in case you are absent for a longer period For shorter periods switch the receiver to stand by with the remote control so that the power consumption is reduced to a minimum Enjoy the reception quality and your new DVB T receiver KATHREIN Euroline Team In the unlikely event of problems with your receiver get in touch with your specialist dealer Every now and then changes are made to the allocation of the programmes In these cases you will have to reallocate the programmes although the factory set pre programming always come up to the latest status You will find the information you need to reallocate the programmes in the Internet or in the relevant periodicals Your receive
5. background Audio With the Audio key you can display the sound TV or Radio that is being broadcast over the reception channel Select the sound and store it with the OK key If the transmitter is not sending language information the receiver displays Unknown To switch between left right stereo use the SOUND key __ Audio 14 Pause and Zoom You can use these keys to make the picture smaller or to switch to freeze image The Quality Key Auxiliary function for antenna adjustment In addition to the display showing strength and quality of reception the receiver has also an auxiliary function with an acoustic signal for the antenna alignment To use this function change to the desired programme and press the Quality key As soon as the quality display is activated the receiver transmits an acoustic signal the frequency and action replay is the same as of the received signal Level 1007 650MHz Quality 50 BWISMHz 0001 Das Erste 13 15 14 24 In aller Freundschaft 14 00 14 15 Tagesschau um drei 15 Calling up the Main Menu MENU key Press the MENU key to call up the main menu select the desired sub menu and press the OK key Main Menu Timer Channel List Edit Favourite List Game Y Exit Back OK Sub Menu View There are five sub menus available which are explained below 1 Timer Menu for setting time delayed recording or automatic stop 2 Edi
6. disconnecting cable networks Observe any timer programming procedures receiver and switch the device back on again in due time before recording begins Place of installation Every electronic device generates heat The heat generated by the device is within an acceptable range however Sensitive furniture surfaces and veneers may change their colour in the course of time due to the constant exposure to heat In the same way the feet of the device may cause treated furniture surfaces to change their colour If necessary place the device on an appropriate firm and flat base Ventilation The heat generated in the device is discharged sufficiently Nevertheless do not install the device in a cupboard or on a shelf with insufficient ventilation Never cover the ventilation slits of the device Do not put any objects on the device and keep a clearance of at least 10 cm above the device so that the generated heat can be discharged without any difficulty Humidity insulation heat Protect the device against humidity and dripping and splashing water Do not place the device near the heating expose it to the sun or operate it in damp rooms First Installation When you have connected your receiver properly switch it on using the power switch on the rear of the unit You will see the following First Installation Antenna Disable av OFF AutoScan Now select the language in which you would like to see the menu by using the 4
7. 46 28 May 2004 13 15 Duration 1 Hour 9 Minutes In aller Freundschaft 96 Auch Clowns weinenDer kleine Toni wurde am Herzen operiert Er versteht nicht was mit thm passiert und kapselt sich so van der AuBenwelt ab Er spricht und isst nichts mehr Durch emen Zufall findet Kathrin Informationen uber Therapien mit Klinikclowns Y OK Nextpage Exit Back 13 You can also obtain detailed information directly from the current programme using the red key You will then see a display of the desired data about the current TV programme without having to switch to EPG mode first see illustration JU y M EPG Detail Info 28 May 2004 13 46 28 May 2004 13 15 Duration 1 Hour Minutes In aller Freundschaft 96 Auch Clowns missen weinenDer kleine Toni wurde am Herzen operiert Er versteht nicht was mit thm passiert und kapselt sich so von der Au enwelt ab Er spricht und isst nichts mehr Durch einen Zufall findet Kathrin Informationen uber Therapien mit Klinikclowns Y OK Nextpage Exit Back To switch to the next or previous day press the Recall P or Quality P key respectively Note To load the programme information you must leave the desired programme switched on for a few moments When you press the Red key while a programme is running you enter Extended Mode Here you will see a display of detailed information on the current programme The current programme remains in the
8. Earth connection k The aerial system should be connected to earth or to the potential equalisation according to instructions Observe G EN 60728 11 and any national regulations in the process WARNIN There is a danger due to overvoltage or lightning Mains voltage Only operate the device with the specified mains voltage on the back of the device or on the external mains adapter The device may only be connected to the mains and switched on after establishing the connections to the aerial and the television set or to the cable network and the PC There is a danger of fire if the mains voltage is too high Repairs Have your device repaired by qualified technicians only No warranty claims will be accepted if the device is opened and an attempt is made to repair the device without any authorisation The electrical safety of the device can be put at risk by handling the device inappropriately The manufacturer assumes no liability for any accidents of the user while the device is open Connections Incorrect wiring of the connections can result in malfunctions or damage to the device Long periods of absence Thunder storms Always switch of the device at the mains switch in the event of long periods of absence or thunder storms You can disconnect the device from the mains by pulling the power plug if your device does not happen to have a mains switch This also applies to any other devices connected to the device We also recommend
9. Programme the Timer Number 1 to 8 activate the timer to release the settings and then select status start time and end time and the number of the desired programme To select the programme press the OK key in the Channel field The programme list is displayed and you can now select the desired programme with the keys Confirm the selection with the OK key to take it over in the timer 18 installation Menu Scan System Setup Parental Control Y Exit Back OK Sub Menu View Adjusting the receiver to your receiving installation 1 Antenna alignment Select 5 V power supply On Off for the antenna 2 Scan Auto Scan overall search Net Scan network search TP Scan specific channels and PID Scan search for one specific programme using the PID 4 System setup Adjustment to your TV set and other individual settings or reset to factory setting You can restore the factory setting your receiver was delivered with factory reset Attention In this case all the changes you may have to the programming of the receivers will be deleted 6 Parental lock Locking access to the menu and changing the password Note The receiver is preassigned and delivered with the installation menu protected by the password 0000 19 Installation Menu Antenna Type Antenna setting Note Should you use a DVB T indoor antenna e g Kathrein BZD 30 visible in the background it must re
10. al Data Designation O A RF Characteristics Input frequency range MHz 177 5 226 5 and 474 858 Modulation type COFDM k8gk 5 16 0 64 0 Guardinteval 1 4 1 8 1 16 1 32 __ __ Ww 1 2 2 3 34 56 78 FMthreshold dB TV System Video Modulation FEC Demultiplexer DVB T Standard EN 300744 Video resolution CCIR601 720x576lines Video decoding MPEG 2 compatible ISO IEC 13818 2 Main Layer SIN gt 53 typically TV System Audio SS ISO IEC 13818 3 Layers 1 and 2 at 10 HET BS Processor A SDBRAM e MBB Power Supply ECT ROC Power Supply O Mains voltage external mains adapter 90 240 50 60 12 V L Ww 13220001 V 12 Power consumption Operation Stand by 26 10 Connections HF Input Output lECsockepn TVVCReconnection 2SCARTsockets21pin Video Audio output 31 3cinchsockets Digital audio output Cinchsoket S VHS output fHosidensoket ______ DataintefacGe RS2328ubD 9 pn Miscellaneous 31 Of course you may also connect a DVD recorder instead of a VCR video recorder 32 DVB T Indoor Antenne BZD 30 k r The reception range of the antenna is 174 230 MHz in the
11. amme last running or the programme that has been selected in the list 15 EXIT Leave the menu or change from a sub menu to its respective main menu 16 OK Press this key to display the programme list or to confirm the options in the various menus 17 AUDIO Select the language or the audio channel for multilingual programmes 18 PAUSE Freeze image statue 19 TV R Toggle between Radio and TV mode 20 AV Switches the TV SCART socket Pin 8 between TV and AV reception Remote Control Using the Remote Control You can use the OK key to confirm the individual settings in the menus or to call up sub menus Change each setting line by line and confirm the entry by pressing the OK key Press EXIT key to leave the menu or change from a sub menu to ist respective main menu Use the a keys to navigate through the menus Use the 4 keys to enter the individual requirements You can also enter the values in the appropriate fields using the numeric keypad The coloured keys are used for the functions within the various sub menus The functions of the respective menu are displayed on the screen A line in which the individual functions are explained appears in each menu Inserting Batteries in the Remote Control SY E Remove the cover on the rear of the remote control Insert the two batteries supplied into the remote control ensuring correct polarity which is shown on the base of the battery compar
12. ceive a power supply of 5 V If the antenna has its own power supply the default setting of 5 V AUS inactive must be retained Setting Up a Channel Mode Guard Band Width Scan Mods Level Quality _ AutoScan Net Scan Tp Scan _ PID Y Select Frequency OK TP table Setup Menu Although the receiver is preassigned it may be necessary to update the programme list 20 Installation Menu In this menu you can carry out the programme search 1 AutoScan All channels in the range of 177 MHz to 858 MHz are searched for programmes 2 Net Scan The entire network is searched for network information Results only if this information is transmitted with the programmes 3 TP Scan Search for individual channels 4 PID Enter audio and video PID for a detailed search for individual programmes 5 Scan Mode Selection of All or FTA free to air programmes only when you run a programme search for all programmes all programmes are stored including the encoded transmitters otherwise only the free programmes are stored Programme Scan Note In addition to the indicator of reception intensity and reception quality the receiver has an assist function with a acoustic signal for adjusting the antenna you can activate in this menu by pressing the Mute key With the red key you can start the programme search for the entire frequency range The receiver prompts you to confirm that you wish to delete the exis
13. eld you must enter the time and date manually with the numeric keypad Note Some programmes may not transmit correct UTC In this case the receiver displays the wrong time of day To display the time of day you had before switch to another European programme and wait a few minutes until the receiver shows the correct time again System Setup Language Settings TY Settings OSD Settings system information Time zons Factory Reset A Y Exit Back 24 System Information Display of the hardware and software versions of the receiver System Setup Language Settings TY Settings OSD Settings Time Settings Model UFE370 S W Version 2 3 1B1A H W Version 1 0 Serial Last Updats 17 May 2004 Factory Reset A Y Exit Back Factory Settings This menu is protected with the password 0000 If you have changed the programming of the receiver and want to return it to the condition in which it was delivered select this item Press the OK key and enter the password After about a minute the memory will have been updated then switch the receiver off and on again The same image as in the initial installation appears Attention The receiver will be factory reset any changes that you may have made will be lost 25 Parental Lock Parental Control Changs Password Old PIN New PIN Verify PIN 74 21 Lock Unlock access to menu In this menu you can lock all menus to prevent inadvertent wrong set
14. en you press the EXIT key the list is will disappear from the display 11 Programme Information TV 0001 Das Erste 13 15 14 24 In aller Freundschaft 14 00 14 15 Tagesschau um drei When you change to another channel the following information is displayed at the bottom of the screen The type of programme TV or Radio indicated by an icon The name of the programme EPO Electronic Programme Guide reception indicated by the letter Videotext reception indicated by the letter T The time Videotext If a videotext signal is available the receiver will transmit it permanently to the TV set You can call up and operate videotext as usual with the remote control of your TV set 12 Operation Electronic Programme Guide EPG EPG Das Erste 28 May 2004 13 45 Fri 13 15 In aller Freundschaft 14 00 Tagssschau um drei aller Freundschaft 13 15 14 24 Detail Info Timer Y 1 EXIT Switch to channel P IP previnext day The EPG Electronic Programme Guide key can be used to call up the programme information if broadcast by the programme provider You can switch to the desired programme by pressing either gt or For automatical programming press the blue key The timer will then be set automatically To have the details displayed extended mode press the red key The following on screen display OSD appears wx EPG Detail Info 28 May 2004 13
15. n OSD Settings 2st audio lang English Time Settings Subtitle lang German system information Factory Reset Exit Back 22 Installation Menu Setting TV Selection of video output standard PAL NTSC SECAM AUTO screen format type 4 3 or 16 9 and the output signal which can be obtained at the TV output CVBS composite colour video signal RGB separate signals for red green blue Note The selection of the screen format type 4 3 or 16 9 always depends on your TV set not on the programme you selected System Setup Language Settings TY Mode Auto OSD Settings Screen Mode 4 31 etterBox Time Settings CVBS RGB 4 RGB P system information Factory Reset Y Exit Back Setting OSD Select the various colours and display parameters with the lt gt keys System Setup Languages Settings TY Settings Transparency lt P Time Settings OSD Timeout 3 system information Factory Reset AT Exit Back 23 Clock Parameters Date and time must be programmed in order that the receiver indicates the correct information messages when you use the timers and in the information messages mode and on the front in stand by mode The internal clock can be set as follows a The transmitted time of day can be used default setting In this case the difference between GMT and local time must be allowed for in Germany 2 hrs In summer 1 hr in winter b If you select AUS off in the first fi
16. nn 17 Setting the Timer Automatic Programming 18 instalation Men iaa ll E m 19 Antena IV OG idad 20 Setting Ubp a Ghablriel k ln 20 System 8 91010110 8 ATION ansehen 22 Seino Language S senkt n datada 22 AA A Sa e 23 IO gt 23 CIOCK RarameterS ett Qusa buba tele ae 24 SISMO malloi 25 46101 50 05 22 40 cupa on IC MIC MM IPM M DI DA 25 micas Roc u PT 26 Sol Fs e oco O 27 Ga Se MM M MINE M ME 28 E 29 SNOK O A UI TT 29 PUNCHONS and Technical u uuu E CEP RU CENA eS UNE QD 30 E nneetllonscheme unse 32 DVB T Indoor Antenne BZD 30 a cia 33 NOC ME ds 34 Views Connections Front View KRTHREIN 1 Operation Stand by key 2 Programme selection keys 3 Programme display Rear View 9 IE om mem 12 m N 2 OO jn OO rrr 9 Elektroschock Gefahr OGD TEE 000 VO 2 5 SPDIF UL ERES h 0 AA 28 8 8 1 TV antenna input socket 2 TV antenna input looped through signal 3 RS 232 data i
17. nterface for serial data transmission during maintenance service only with null modem 4 SCART connection for TV set 5 SCART connection for video recorder 6 S VHS output 7 Video output cinch socket 8 Audio output cinch sockets for stereo equipment left and right 9 Mains switch On Off 10 DC input Remote Control BE 000 CAI 2 e e e Remote Control Functions of the Remote Control 1 POWER switching on and stand by mode 2 Numeric keypad 0 9 For entering programme numbers or menu parameters 3 QUALITY P Displays the DVB T signal level of the current programme Also used for the antenna alignment and for paging in lists 4 MENU Call up of the main menu 5 Up Down For changing channels and or navigating through menus 6 Left Right Volume control and or navigating through menus 7 SEL Not used 8 FAV Displays favourite programmes list press this key repeatedly to display the different lists 9 TXT Displays detailed information on the current programme this information can also be called up with the EPG menu 10 SOUND Sound selection between left right stereo and the blue function key in the menus 11 ZOOM Reduces the picture format 12 EPG Electronic Programme Guide and yellow function key in the menus Press this key to call up the Electronic Programme Guide if available 13 MUTE Turns off the sound 14 RECALL P Calls up the progr
18. r has been factory set with the latest software However we are always keen to adapt the software to our customers requirements and the state of the art You will find more information on this subject in chapter Software Update Please keep the original packing in case you have to send the receiver to us Content Prefac feme CE 3 2 M ERN uM MM E ML LM E A E 4 Views and Connections cec 5 A e A 5 A dl 5 Remote Control uuu uu M 6 FUNGONS OT the Remote Control dd 7 Using the Remote A E m 8 Safety Noticia ae a C 9 O 10 Mer LI T T 10 Programme Selection TV and Radio 11 elle AA e o 12 lle A o Sa upa Qa ee uns 12 Electronic Programme Guide EP a 13 A 14 PAUSA T Ba LE u a 15 The Quality Key Auxiliary function for antenna adjustment 15 Main ao terr rc ET 16 Calling up the Main Menu MENU key oocccccooccocococcocccccconconononononcnnconnconnonnnnnnonnnnnnononcnnnnannnnonannnanenannnness 16 Organising Programmes and nnne nnne nans nnn
19. t Channel List Allows the organisation storing and the sorting and allocation to the channel list 3 Edit Favourite List Allows the organisation storing and the sorting and allocation to the favourite programme list 4 Installation Menus for setting up the antenna the channels the system menu and the parental lock 5 Game Two games available 16 Main Menu Organising Programmes and Favourites Sorting Press the red key to call up the sort functions When you exit the menu the receiver prompts you for password confirmation Attention When sorting has been confirmed access to the previous lists is no longer possible Favourites Press the blue key in the Programme Organisation menu and then allocate the programmes to the appropriate Favourite lists using the coloured keys Other List Change the Favourite list in the Favourite Lists menu Process green key Store access is password protected Skip remove a programme from the main list Delete yellow key Delete a programme 17 Setting the Timer Automatic Programming Timer Current Time 28 May 2004 13 57 Timer Number 1 Timer Mods Ons Tims Dats 8 05 04 Time 12 00 stop Time 00 00 A Y OK TV Radio Favourite List Note The timer can also be programmed with the Electronic Programme Guide EPG See Page 14 The clock must be set correctly in order that the timer is ready for operation see Installation Menu
20. tent programmes If you confirm with JA all the allocated programmes are deleted and the new programming entered in the main list in order of the factory set pre programming at the factory If you select lt EXIT gt the programme search will not be started Note Should you be in the catchement area of two DVB T networks it may happen that you find some channels twice in your programme list after you run the AutoScan You can leave them as they are or you can decide in favour of the programme which provides the better image reception and delete the other one Start the scan by pressing the green key for a specific channel The programmes that are found will be added on the end of the programme list PID Programme Identification input Press the yellow key enter the video PID and the audio PID and press the yellow key again The programme identified with lt TV will be placed at the end of the main list 21 System Configuration This menu allows the adaptation of your receiver to your audio visual surroundings or the reset to the factory settings Setting Languages Access to language selection The following menu languages are available German Spanish Italian Czech and English The preferred languages for audio and sub titles are also selected here The selections are made by pressing the and 4 keys Confirm your settings with the OK key System Setup TY Settings 1st audio lang Germa
21. ting The receiver is delivered with the installation menu locked but the other menus are not protected For child protection it is necessary to lock all the menus Attention Keep the password in mind in case you have changed it Should you forget the password an intervention carried out by the repair service will be needful This intervention however will not be under guarantee 26 Software Update Attention A PC anda null modem cable are required for the update process If new software for your DVB T receiver should become available you can download it from the following homepage www esc kathrein de download There you will also find information and notes on the software update process via the RS 232 interface on the receiver You can also order the required null modem cable from the ESC company in Grassau at the following address ESC Elektronik Service Chiemgau GmbH Bahnhofstra e 108 83224 Grassau Tel 0 86 41 95 45 0 Fax 0 86 41 95 45 35 u 95 45 36 E mail service esc kathrein de Internet http www esc kathrein de Note After successful software download of the software you must carry out a works reset Your old password is no longer valid after the software update You must now enter the universal password 0786 You will find instructions how to carry out the works reset on Page 25 2f Use the keys in the main menu to select Games and press then OK The following is then displayed
22. tment Slide the cover back onto the housing until it locks in place Used batteries are special waste Do not throw used batteries into your household waste take them to a collection point for old batteries Electronic equipment is not household waste in accordance with directive 2002 96 EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27 January 2003 on used electrical and electronic equipment it must be disposed of properly At the end of its service life take this unit for disposal at a designated public collection point This page contains important instructions for putting the device into service and installing and connecting it Read these instructions with care before putting the device into service Power cable Make sure you do not damage the power cable Devices with damaged power cables must be disconnected by pulling the plug and repaired by a technician before being restored to service Only use the supplied mains DANGER adapter as intended There is a danger of life threatening electrical shocks Cleaning Pull the power plug before cleaning the device Use a dry cloth for cleaning and only clean the surface Do not under any circumstances open the device There is a danger to life due to electrocution if components are touched within the device Playing children Take care that children do not insert objects in the ventilation slits There is a danger of life threatening electrical shocks
Download Pdf Manuals
Related Search