Kathrein UFD 574/S User's Manual
Contents
1. After pressing Mm you can continue watching the current programme time delayed The audio modes S stereo L mono left or R mono right Dolby Digital AC 3 or MPEG stereo can be set with the yellow key and the cursor keys You can carry out a visible search in four steps up to four arrows are displayed in the regular replay by pressing and gt In audio recordings this function does not work due to the automatic mute function If the control panel is active you can carry out a time controlled search when you have a freeze image displayed on the screen by pressing and gt The longer the the forward rewind key is kept pressed the faster the search speed becomes You can tell this by the bar and by the numerical indication Press to continue the regular replay on the desired position Press Mm to have a freeze image where desired Unlike replays of tape recordings you can have freeze images as often as you like as they are of unchanging digital quality without any wearout Press the red key to slow down the speed of the regular recording in four steps Each time you press the red key you halve the slow motion speed Press to get back to normal replay speed 41 Hard Disk Recorder Note Breakpoint Stopping Deleting 42 The slow motion function does not work when the control panel is displayed You can quit the replay of a recorded film in order to go on wa2. Timer Recording Note Stopping the Recording 38 number during recording Additionally the red light emitting diode stand by on the front panel flashes The hard disk contents are displayed for about 5 seconds then the recorded programme is played If you want to jump in a current programme at once you merely have to press either x or ex and the control panel of the receiver is dis played 62 NDRFSMVP U b RI 00 00 00 00 00 04 Stereo Modemacher us Please refer to chapter timer programming and to EPG timer in programme overview for timer recordings The timer starts the recording on the pre programmed time The receiver also feeds the VCR socket with the recording so that you can additionally record the programme on an external recorder at the same time All DVR functions are active during the timer recording So you can start playing the recording in time shift mode even though the recording has already started before The recording can only be stopped by pressing stand by and the hard disk contents are displayed or by pressing Ex After the time given by the timer has run out the receiver automatically switches to stand by mode Receiving and recording at the same time as well as receiving and the replay of another programme at the same time is not possible After the time given by the EPG or set by you has run out the recording stops automatically The hard d
3. Favourite Programmes 26 6 NDR FS HH a 4 MDR FERNSEHEN 2 NDR FS MVP Press the red key to have the four programmes last received for at least 10 sec shown on the screen The arrows displayed accord the cursor keys OMA Use these keys to select the respectively as signed programmes If you call up this function the flash above ap pears on the screen You can organise and sort your favourite TV and radio programmes e g all German programmes These favourites are distinguished with the apple icon shown with the key in the TV or radio channel list RV Channel List Bereich 1 ICH 431 650 0 MHz Auto 8 MHz MDR FERNSEHEN ARD NDR FS NDS NDR FS HH FOV oe WDR K ln LOCK ADD M MOVE il MODE D gt Page Up On OK gt Watoh MENU Maln EXIT Exit O Move Press JP and 00 to select the desired favourite programme which is then highlighted with a coloured bar Channel List Press the red e key to have the favourite programmes list displayed TY Channel List OK gt Seleot MENU EXIT Exit Rename Use the a keys to determine in favourite list 1 to 5 in which list you wish to have your favourite programme stored You can store several different programmes in one list MY Channel List LORD Seleot MENU EXIT Exit Rename All family members can store their own favourite lists These programmes can be protected with passwords s
4. Protect the unit against moisture dripping and splashed water do not place any filled objects such as vases on top of the unit Do not place the unit close to a heater or expose it to direct sunlight and do not operate it in damp locations Only use the unit in a moderate climate not in tropical conditions Installation e First of all connect your receiver to the TV set and the antenna installation e Switch on the TV set e Select the AV programme position for the receiver connection e Now connect the receiver to the wall outlet e Switch on the receiver by pressing the red key on the remote control stand by The following is displayed on the screen First Installation Active Antenna OFF Scan start OK e Use the DO keys to scroll the selection cursor to the line Language and select the desired language with the keys QC Confirm your entry with ex e Use the 00 keys to scroll the selection cursor to the line Active Antenna and select the desired setting with the keys Confirm your entry with ox see pages 15 and 17 e Use the DO keys to scroll the selection cursor to the line Start Search Confirm your entry with ex We recommend you had the entries now saved by the receiver Now a search is carried out and the receiver is in the basic setting The on screen display informs you on the next steps The first programme of the channel list is displayed on the screen below a bar is displayed
5. red FAV to make the displayed channel a favourite channel green PIP to lock the displayed channel 0 yellow OPT to relocate the channel to another position 0 blue TV R to delete the displayed channel to add another channel Mm to select the programme mode of the channel list Find further information in chapter programme selection 17 Videotext Subtitles Videotext Subtitles 18 As soon as the videotext subtitle icons opposite appear the receiver starts processing these signals videotext also if signals are scram bled for the TV set Call up videotext by pressing the blue key and have it displayed immediately Exit videotext by pressing the same key The individual pages can be called up with the number keys While a page is searched a blinking asterisk appears in the left upper corner P100 OPT If subtitles are broadcast you can call them up with the yellow key and with 9 Press 9 to select the desired language of the subtitles Exit the menu by pressing Ex Programme Selection Selecting a TV Programme Reception Status Learn how to change TV channels and how to adjust the volume Concerning the function description we assume that the receiver has been properly connected If you wish to connect it yourself please read chapter connection and initiation first Below you can learn how to select call up more programmes and what the screen inserts look li
6. Technical Features Technical Data RF Features Video Audio Hard Disk Recorder Power Supply Connections General Temperature Range Frequency ranges VHF UHF Input level range RF input Input impedance Modulation FEC demultiplexer Video resolution Frequency range Input data rate QPSK Code Rate 1 2 Guard Int 1 4 64 QAM Code Rate 7 8 Guard Int 1 32 acc to EN 300 744 annex A Video decoding Bit rate Output voltage S N Audio decoding Bit rate Frequency range Output voltage S N Capacity Recording time Supply volt volt supply receiver Power consumption Power consumption in stand by Antenna amplifier supply TV connection VCR Aux connection Audio output Dolby Digital data stream output AC 3 Ext Infra red receptor Data interface for servicing Dimensions W x H x D Weight Ambient temperature limit CE C05 to C12 177 5 226 5 MHz C21 to C69 474 858 MHz 28 to 98 dBuV IEC socket with loop through output 7150 DVB T standard CCIR 601 720 x 576 lines 20 Hz to5 MHz 4 98 MSymbole s to 31 67 MSymbole s MPEG 1 and MPEG 2 compatible 1 5 15 MB s 1 Vss 75 Q Typ gt 53 dB MPEG 1 and MPEG 2 Layers 1 and 2 32 44 1 48 kb s 40 Hz to 20 kHz Typ 770 50 mV on 10 kQ TV Scart and Cinch 65 dB 80 GB Up to 56 hours dependent on data rate and picture contents 230 V 10 50 Hz 12 V lt 15W typ 10 W 5 V 30 mA Scart socket 21 pole Scart
7. informing on the programme provider time timer settings programme status and programme name provided that this information is broadcast by the programme provider The LED indicates the programme memory number The reception status last set will be called up each time you switch on the receiver If bad or no signal is displayed on the screen together with the programme last received check whether the installation is in order and the settings of the receiver are correct If only a few programmes are affected this may mean a signal failure on the part of the programme provider Please check the time as to daylight savings time and wintertime Installation Factory Setting of the Receiver Reset your receiver to the basic settings by calling up factory settings in the menu Installation Manual Scan Software Download P TOKS Next MENU EXIT Prev Press D to call up the main menu Press DO and ox for Installation and 4 and ex for factory settings After you have pressed ey the same procedure as specified above in chapter installation starts Control Elements Indications and Connections Find a brief description of all the control elements indications and connections of the receiver in this chapter The key symbols shown here are also dealt with in the description of the operation steps View Front Panel flap down AC 98V 240V 50 60Hz max 30W AN 00000
8. timer settings are ignored after successful download Please note that signals of digital television do not provide the VPS signal Consequently you have to programme your external DVD or video recorder in accordance with the timer settings 23 Sound Settings Adjusting the Volume Press B on the remote control of the receiver to adjust the desired volume A bar indicating the volume is displayed on the screen Stereo and Dual Channel Sound Reproduction The sound reproduction setting is shown in the channel information which can be called up by pressing depending on where the sound wave icon appears underneath the displayed time mono left mono right or stereo can be set the figure indicates which is set The programme title is displayed in the small box on the right O F Subtitle Audio Audio Track Audio Mode Dig Output Press the yellow f key to call up the audio menu for the sound and language selection You can make the desired settings if the corresponding data are provided in the reception signal as are e g language selection sound track Dolby Digital 5 1 CH Select the menu items by pressing AM and make the desired settings with 0 Press f again to exit the menu If subtitles are broadcast you can select the language with IB in the bar subtitle track Confirm your entry by pressing ex AC 3 The receiver has an audio output for the AC 3 format This means you
9. M wreath cena eae ee ieee ah 53 System Information rt id ihr 53 Local Timeme cucuta a dia 53 Daylight Savings TIME sevi da daa 53 TUI Pera to 53 Picture Formal it am sieving Riemen nis ren 54 OCN tn sashes dedi er ate eee A trans Ne nest da 54 INS MOG G se ruminants MMS as Reel men ers eisernen 54 Factor S ttingis mentir Ad i eee deen ei See Os 54 DVD and Video Recorder Connection annees 55 Recording 2 cite did tia ea da eel ie ae m me 55 Replay s fr ide tha bn entail E A ene ntl din At didas sd 55 Software and Channel List Update uursansansnannnsnnnnnnnnnannnnnnnnnnnnnnnnannnnnnnnnnnnnanannnnnnnnnnnnnannnnnnnnnnnnnn nn 56 Technical Features ocio Leni dns rennen aa Dee Ban nn nent se anne nl Sueetseseeveesaesuteecevesevestenluneceskews 58 Technical D tar 2 Sing aca 59 e 60 A A TN PEU 60 YHSIS VAS Changeover Teor na aa iia 60 Gonnection Exam ple iii ile 61 Small Technical Encyclopaedia ccccccseccceeseceeeeeeneeeeenenseceseeeseeeeaeseeeesaeseeeseaeseseseaeseseseaeseseseanseseseeseeeeaes 62 A EEA E R TA E E E A A E E AE E E E Le osent ete nn es Ed suave tious E 63 o DAL o O ON 64 Safety Instructions DANGER WARNING CAUTION This page contains important information about the operation installation location and connection of the unit Read these instructions carefully before starting to use the unit Mains cable Make sure that the mains cable power supply cable is not d
10. be watched On calling up the locked channel the password is inquired and you can watch this channel only if you have entered the password On calling up the locked channel via the number keys this channel is locked is displayed and the channel cannot be watched 45 Operating from the Front Panel Exceptional Case Operation 46 If you happen to have mislaid your remote control or if the batteries of the remote control are empty you can also run your receiver from the front panel These seven keys are on the front panel The on off key and behind the flap the menu key and a select key as well as the cursor keys The latter are used just like the arrow keys on the remote control Use the on off key to switch on or off the receiver You can select all channels and menu items as well as adjust the volume with the arrow keys The select key on the front panel has the same functions as the key As there are no number keys you cannot call up any password protected channels Installation Network Configuration Please mind the suppor tive information you can read in the individual menu items by pressing x Of course new networks can also be added to the network configura tion Refer to menu item antenna alignment in the installation menu for support in aligning the antenna Get to network configuration by pressing D to call up the main menu and by using the keys DO and plus pas
11. connected through the VCR AUX Scart socket to the TV Scart socket You have to set the Scart socket of the satellite receiver to AUX by pressing O so that the TV set can automatically reproduce the pic tures of the video recorder In this setting the picture of the video recorder is connected through to the TV set on replay If TV is set the video signal of the TV set is preferential 55 Software and Channel List Update Due to digital technology the software and the channel list of your re ceiver can also be updated via the reception Refer to the sub menu software download to find out whether new software or a new chan nel list is available Your receiving installation being aligned and set to a service channel is the only precondition Select the main menu with E Call up the sub menu installation with 00 and Ci Scroll the selection cursor to the position software download and select this position with ey The menu item software download is thus opened You can call up the individual positions with 00 and here In position show in formation you can obtain information on the transmitted software and the channel list The positions show information operational soft ware and channel list are automatically commented on with Yes if new information and contents are available The left bar indicates the relative signal level TTT x 56 Software an
12. socket 21 pole 2 x Cinch socket Cinch socket Jack RS 232 Sub D 9 pole 235 x 45 x 200 mm About 1 4 kg 5 C to 40 C 59 Technical Features Accessory 1 Infra red remote control 2 Batteries 1 5 V Type LR 03 Size AAA Micro 1 Scart cable 1 User manual Scart Socket Seizure Signal Connection No TV VCR Audio right output 1 x X Audio right input 2 X Audio left output 3 X X Audio GND 4 x X Blue GND 5 X X Audio left input 6 X Blue signal 7 X X Switching voltage 8 X X Green GND 9 X X Data signal 1 Green signal 11 X X Data signal 12 Red GND 13 X X Data GND 14 Red signal C 15 X X Blanking signal 16 X X Video GND 17 X X Blanking signal GND 18 X X Video output comp col Y 19 X X Video input 20 X Connector screening 21 X X VHS S VHS Changeover The Scart sockets can be changed over from VHS to S VHS and the other way round You can change over in menu item system parameters A V mode In VHS RGB The RED signal is on connection 15 Connection 19 is on the comp col output In S VHS C Y The C output is on connection 15 the Y output is on connection 19 60 DVB T receiver connections with an entire television and HiFi system The electrical digital audio output can be connected to a Dolby Digital unit TV Scart Kabel Zimmer oder DVB T Receiver AuBenantenne UFD 574 ay elektrischer Scart Kabel Digital Ton AC 3 zur Dolby Digital Anlage Cinch Ka
13. the hard disk still has enough capacity By pressing or the contents on the hard disk 1 as well as the remaining storing ca pacity 2 are displayed Instantly Recording OTR One Touch Recording HD Program Guide 1 Play Type Welt der Wunder 00 08 Eine schrecklich nette Familie 00 06 Sterne des S dens 2 ClipMix mit Sonya und Alexander Play time vos Free 6 0 GB 7 6 29 10 2003 08 21 Kleine Planeten Gute Reise Bi Y OK Waton Delete EXIT Satellite Mode 9 Edit You can immediately record the current programme on the hard disk with your DVB T recorder To do so merely press OTR One Touch Recording Instant recording and confirm with ex Recording Manually Press and DO to select a programme and prepare the recording with the red key Now a menu is displayed showing the channel name the programme title information if broadcast as well as the starting time and the end of the programme You can vary the name and information and the recording stop with the number keys Press OO to vary the recording stop in 30 min steps Press ox to start the recording The hard disk contents displayed now for a few seconds show a red R for Record in the right upper corner of the screen and display the title of the current programme in the small box at the bottom For a few seconds the LED indicates REC Record and HXXX the record 37 Hard Disk Recorder
14. time and length of the programmes but only if this information is broadcast via the Electronic Programme Guide EPG Programme Overview The length of the programme list is dependend on each programme provider and its contents can span several days Timer Programming via EPG You can scroll the coloured bar in the list with 00 and select a pro gramme for timer programming By pressing the red key storing the timer is displayed By pressing GM you can select different settings e g the pro gramme is to be recorded only once or daily or weekly Then you can scroll the coloured bar in the list with 00 and determine by pressing the oo keys if the programme is to be recorded on the hard disk selection on or on your external video recorder selection off 36 Press 0X to confirm your selection The confirmation is displayed for several seconds The programme will be recorded on the time set Press Er to exit the timer settings Hard Disk Recorder Your receiver is equipped with a hard disk and therefore allows for the recording of the current programme while watching the same one time delayed or another earlier recorded programme The recording ca pacity is depended on the picture contents of the programmes broad cast Mind the information on the next operation steps in the bar at the bottom of the screen insert Recording Hard Disk Capacity Please check before each recording whether
15. to change to the programme next on the list press G to get to the next page of the list Select a programme by pressing e You can also select a programme by numeric character entry with the number keys Press to exit the channel list but retain the current programme 20 Programme Selection Selecting a TV Programm with the Number Keys numeric character entry Example You can also change channels by entering the programme position of another channel with the number keys O to O You wish to select channel XYZ on position 15 the TV channel order is predefined in the programme list and therefore only exemplified now Successively press O and The receiver takes about 3 seconds to process your entry Follow the same procedure for all other programmes also for those stored on a 3 digit position Do not enter 0 as first figure as so called leading zeros are reserved for the Scart changeover Switching to Radio Channel Reception Currently no radio programmes are being broadcast on the radio channels However this may change in future Then you will be able TVR to change over from TV to radio with the TV Radio key Operation will be carried out along the same lines of TV operation 21 Timer Settings 22 You can programme a timer to be able to timely record a programme 14 timers are available which you can set to different channels as well as starting times and ends of programmes Call up th
16. Elektroschock Gefahr Fema Nicht oeffnen CAN san DATA 1 0 DIGITAL A gt TV 00h 00100007 hp _ VCR AUX 1 2 3 4 5 6 7 8 9 10 Control elements and indications on the Control elements and connections on front panel the back panel 1 On Off switch with power disconnection 1 Electrical Dolby Digital output AC 3 2 Orange LED confirmation of the 2 Scart socket TV connection commands via the remote control 3 Scart socket VCR connection 3 Menu key equal to remote control 4 Composite colour video output u einai LED 5 Input for infra red receptor 5 Select key for calling up the channel list 6 Audio outputs 6 Red LED Stand by 2 Cinch sockets left and right channel 7 Cursor keys equal to remote control 7 Antenna output looped through 8 Pressure lock for front flap slightly press 8 Antenna input On tie MORE Upper sitet OPEN DATA socket interface for serial data transfer service 10 Power feed cable An external IR mouse for the hidden placing of the receiver is additionally available Remote Control Menu Functions Digit input for programmes timer etc Menu Last Programme prog is made a favourite Channel locking E EXIT Exit menu E Play contents on hard disk Freeze image Video Timeshift Record Slow motion on play On stand by Videotext Sound selection Changeover TV Radio
17. Programme information programme selection up down Entry confirmation 0000 Cursor keys Elect programme guide Fast forward Stop record Stop play Freeze image TV Remote Control Menu Functions RC 660 Remote Control The RC 660 remote control is suitable for up to four different devices and additionally for all UFD 5xx receivers apart from UFD 552 554 558 and all UFD 4xx receivers How to have the same infra red code for each receiver Only switch on the corresponding receiver Press the following keys on the remote control at the same time Address 1 er D Each keypress on to the remote control is acknowledged with Address 4 2 O O the green LED on the front panel of the F CEMEE red Kathrein UFD 5xx code RC 400 remote control RC 600 and RC 650 remote controls cannot be replaced Alphanumerical Assignment of Number Keys on the Remote Control o x CA ZA I M DW o N ON oa OH RF WO N O 10 Notes regarding Operation Language Selection Menu Concept Note Alphanumerical Entries Select the language of the screen inserts like this 1 1 menu language gt G German 6 Select between German English Italian French Dutch Portuguese Spanish and Turkish The menu concept follows logical operation sequences The current channel is always indicated in the top right corner of the screen The men
18. Recording A dias 38 Stopping Me Recording iaa 38 SPeClalFUNCHONS E AA TAAA TAE E E A eet TE A A A del A 39 REENE RECO ai ai A E E E A O A E E 39 EEE za E T Aes as ce E E A E A EE E T E a tes 39 setting and Deleting dice a K 41 Delayed Replay daa 41 AUdIO ModE a aida 41 o EE TESE E E A o AEA 41 Visible Searchin t menearen ee aed nied are e aae aaea odes 41 Time Controlled Search miii u A ne 41 Freeze lmage 2 reden heil une Heulen ae nen 41 Slow M tion civic Han las re ie 41 Breakp int un ee ns rar are RD 42 SIOPPING Ha ee A ie kei Melle 42 Deleting nie ie EN Eee Ae a RM are 42 PassWord A nn ar AN 43 Factory Settings air arten mithelfen 43 Password ENtNy 1 cda ehe en ee ne ni ran 43 Parental Lock iii ee Rate Aan Hr en RR IHN rn 45 Operating from the Front Panel unsnnssnresnnnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnrnnnnnnnrnsnnennnnsnnnnrnsnnnenrnsnnnnnrnnnnen 46 Exceptional Case Operation zu ih ki ne eerste aie te os 46 Installation 2 2 2 2 2 22 EE EE 47 Network Configuration u 2 HER nn inde 47 Entering the Network Name iaa 48 Deleting aiNetworken tits acters ett das 48 Antenna Alignment sets oo 49 Automatical Network Search AAA 50 Manual Search a a tat tn etd telnet Adee nt sedi ut AR Me espana colada art 51 Setting the System Parameters osc tisciisccssecceccssececeecesteeseesseces cossecsnecasseedeceatuess cocaina 52 System Paramotor it ad ir ER ee nd 53 Parental lock e ii ds ld Stee dir
19. User Manual DVB T Receiver UFD 574 S With Hard Disk HATHREIN Antennen Electronic Preface Important Notes Radio Programmes Dear customer This user manual is thought to help you make the best use of the many functions your new DVB T receiver offers DVB T is a television standard which will provide optimum reception without ghosts or any other disadvantages conventional terrestrial television brings about even if you merely use a suitable indoor antenna We have composed the instructions as plain and short as possible In order to give you an understanding of certain terms we have compiled an encyclopaedia at the end of this manual The power switch of the receiver satisfies the eco friendliness aspects We therefore would ask you to disconnect your receiver whenever you are not going to use it for any length of time in order to save electricity To spend only a modicum of energy in case of shorter intervals of absence please switch the receiver to stand by We trust your receiver will always provide high quality reception and wish you much pleasure with it The KATHREIN Team However if you have against our expectations any trouble with your receiver please contact your local dealer or call our hotline Tel 49 0 80 31 18 47 00 Fax 49 0 80 31 18 46 76 Your receiver is factory set with the latest software version in each case We are anyway always keen to have the software versions meet
20. amaged Units with a damaged mains cable must be disconnected from the mains disconnect mains connector and repaired by a qualified engineer before setup Only use the power pack supplied if available Risk of death due to electric shock Cleaning Disconnect the mains connector before cleaning the unit Only use a dry cloth for cleaning and only clean the outer surface Never open the unit Touching the parts inside the unit carries a risk of death due to electric shock Playing children Make sure that children do not push any objects into the ventilation slots Risk of death due to electric shock Earth connection The antenna system must be earthed as specified or equipotentially bonded EN 60728 11 and any national regulations must be complied with Danger due to surge voltages lightning strikes Mains voltage Only operate the unit with the specified mains voltage marked on the rear of the unit or on the external power pack The unit may only be connected to the mains and turned on once it has been connected to the antenna and to the TV set or the cable network and PC If the mains voltage is too high there is a risk of fire Repairs Ensure that any repairs to your unit are carried out by qualified personnel Opening the unit and attempting to repair it yourself voids all warranty claims Improper work on the unit can jeopardise the electrical safety of the unit The manufacturer accepts no liability for accidents
21. an read in the individual menu items by pressing G 50 You can have your receiver automatically search networks and chan nels You can select either network search or channel list search Channel list Receiver searches existent channels by means of the channel list Network Receiver searches all the channels available in the current network er Network Scar Press ox to start the automatical search The scan progress in indicated with Scanning Ne ji TV 0 Scaming8 Radio 0 Bereich 1 71 1915 MHz Auto 7 MHz 2 d Which channels are currently stored is indicated in the TV list and the radio list When the end of the search is indicated you simply have to store the result and exit the menu by pressing ex twice The new data are stored automatically Installation Manual Search Please mind the suppor tive information you can read in the individual menu items by pressing G We recommend the manual search if you already know the channel data the frequencies or the channel number Use the 0 0 keys to scroll to one of the two settings that you can change stepwise until you receive a signal The bar on the left will help 2 AD MENO M Prev Picture above Correct network wrong channel wrong frequency Picture below Correct network correct channel correct frequency Signal display Good C gt MANNAN You have to enter network channel and frequenc
22. bel g Hinweis ET anstatt des VCR kann q nat rlich auch ein Dolby Digital Anlage DVD Rekorder angeschlossen werden HiFi Anlage 61 Small Technical Encyclopaedia DVB MPEG 2 Eb No ratio FEC PID Channel Package Symbol Rate Video Bit Rate Viterbi Rate 62 DVB is short for Digital Video Broadcasting DVB T points to the transmission method T terrestrial MPEG is short for Moving Picture Experts Group a task force drawing up internationally valid standards for the digital audio and video compression MPEG 2 was made the standard in the compression of digital TV signals MPEG 2 functions in a data rate of up to 100 MBit s The Eb No ratio is a measure for the signal to noise ratio of the digital signal This value is not identical to the C N value know of the analogue reception technology In the case of Eb No values below 5 dB reception is normally no longer possible FEC is short for Forward Error Correction The error rate FEC corresponds to the Viterbi rate The PID number Packet Identification is an identification number for video and audio signals in the digital data stream of the DVB MPEG 2 signals With the PID number the receiver can establish a clear allocation of the video and audio data transmission The PID PCR is the identification number for the synchronisation signal The PID PCR normally is identical to PID Video In multilingual programmes another language could be assigned
23. can enjoy cinema like sound quality in your living room with the appropriate equipment Connect the digital audio output only to a suitable HiFi unit Please observe the owner manual of your Dolby Digital unit In order to have the AC 3 format reproduced make the following settings Call up the audio menu scroll to position stereo set the receiver to 1 of 2 or 2 of 2 respectively 2 CH Now Dolby Digital AC 3 is displayed in position digital output if broadcast correspondingly Only a few programme providers broadcast the AC 3 format If no AC 3 signal can be received you can merely make the standard mono stereo settings or select a language which is broadcast 24 Sound Settings Mute Function Press 5 on the remote control The sound is then muted The same icon is then displayed on the screen Press this key again The sound is now unmuted again To indicate this the volume bar is displayed for a few seconds You can change channel while the mute function is active however this function is retained until the sound is either unmuted again or until you re adjust the volume with the corresponding keys on the remote control 25 Channel List The initial programme channel settings can be changed in menu item channel list Call up this menu item with the keys y 00 as well as IB for TV or RADIO and ox again If stored also a password must be entered Selecting the Channel last received
24. caused by the user opening the unit Connections Incorrect wiring of the connections can lead to malfunctions or defects on the unit Long periods of absence storms Always turn off the unit at the mains switch if you will be absent for a long time or there is a storm If your unit does not have a mains switch you can disconnect it from the mains by unplugging the mains connector This also applies to the other equipment connected to the unit Isolation from the cable network is also recommended Note any timer programs receiver and turn the unit on again promptly before the recording time Installation location All electronic equipment generates heat However the heating of this unit lies within the permissible range Sensitive furniture surfaces and veneers may become discoloured by the effects of constant heat over time The feet of the unit can also cause colour changes to treated furniture surfaces If necessary place the unit on a suitable stable and flat base Ventilation The heat generated in this unit is adequately dissipated However the unit should never be installed in a cupboard or on shelves with inadequate ventilation Never cover the cooling slots on the unit e g with other equipment magazines tablecloths or curtains Do not place any objects on top of the unit and maintain a clearance of at least 10 cm above the unit so that the heat generated can be dissipated with no obstructions Moisture sunlight heat
25. d Channel List Update Use the bright selection cursor a v and or gt to determine which position you want to deactivate No The positions which are al ready inactive cannot be changed If you merely want to actualise the software but want to leave the channel list deactivate the field chan nel list and the other way round To carry out an update scroll the selection cursor to Start and con firm with ey Then the receiver starts the update and if necessary displays the following information on the sreen Informationen zum Download Information UFD 574 01 08 2004 Dear customer your receiver is updated A software download is not necessary Further information www kathrein de W 4 vorherige After the update the receiver is re initialised and operational again In case of an error or a missing signal download failed is displayed Not on any account switch off the receiver during the update as otherwise you will delete the entire software In this case the software would have to be re installed either in a workshop or via PC and null modem cable During the download please wait is blinking After the request show information you should go by the screen insert which is then displayed Observe all screen inserts After a software update you have set the time again You can also call up the software updates on the internet under www esc kathrein de download ufd Yo
26. e 4 keys It is high lighted with a coloured bar and displayed as small insert in the right upper corner of the screen Press ox to confirm your selection The programme is now displayed If you want to get back to the channel list display of all programmes of the networks which are set press then press DO to select the network line then select all networks with J gt Press to have the current channel list displayed You can sort the channels just as you want The sorting is effected by shifting the entries in the channel list Call up the channel list by pressing ex i Select the channel you want to shift with 4 and M The bar indicating the current programme is highlighted in the list with a col oured bar and the programme is displayed as insert in the upper cor ner of the screen Press the yellow key to mark the channel which you want to shift The writing in the bar is now red Now you can shift the channel just as you want with a and DE Press the yellow f key once more to position the channel where you want to have it stored Press ox to leave the channel The new storage is confirmed and displayed on the screen for a few seconds The shifted channel is shown on the screen and now stored on the new position in the channel list Basically you need to follow almost the same procedure for deleting a channel as for sorting a channel Press ox to call up the channel l
27. e siorse uns iiien iia ee A dd dad nee 19 Reception SAUS airar tice 2 laa eee el ele ene ee E A 19 Selecting a TV Programm with the Number Keys numeric character entry 21 Switching to Radio Channel Reception sise 21 Timer SettinGS ensia nn a cid 22 VPS SON A A A A A bein oes see dt 23 Sound Settings voii a A a aia RE EAA OEE AN A a 24 Adjusting the Volume sti eect A isn a a Ge KEA 24 Stereo and Dual Channel Sound Reproduction ss 24 PRG Se O NN 24 Mute FUnclON AAPEA ss riera 25 Channel List eiii ea edaveavsescboenenspvavedecepeetcnsessstilccnecetnassaudigevevesesnmectedieenveheeseits 26 selecting the Channel last received is citaciones 26 Favourite PFOGrAMMMES cupido 26 Alphabetical Channel Search in tent tte te mener landen lochs ais 30 Chahnel sort Fun tion sen te en aeg tapant el ad ten tientas didnt ta 31 Deleting Channels hist 22er initi e baaa 31 Adding channels manualy rerien eae a aE nt let rl lee le te tr enr een A 32 Programme OVEEVICW ss lt cscieccciveciccccsaceccensaccecdeductecensandecdnguseceedhduciecensaadecdesusceeessaceeededusiecedsaziesraauiesdadaceienasasenees 34 EPG ua dai iaa 34 Timer Programming via EPG u 21 lassen anlagen 35 Hard Disk AAA ans nnne gens ete done en es T 37 Recording nr anti mir en Monet etes di nn a nan ea Mantes ET E di ere een ten aa 37 Hard Disk Capacity ta Anido A 37 Instantly Recording OTR One Touch Recording ss 37 Contents Recording Manually sA ot AA 37 Timer
28. e timer settings by pressing then use the keys DO to scroll the selection cursor to system parameters now press and use the keys DO to scroll to local time timer and confirm with ex The following is now displayed 15 11 2004 18 46 Timer 1 CH Type Timer 2 CH Number Timer 3 CH Name Timer 4 Start Time Timer 5 Stop Time Timer 6 Status Timer 7 HD record OK gt Edit MENU Maln EXIT Prev Use the keys DO to scroll the selection cursor to the appropriate timer and confirm your selection with ex Press to exit the timer again Incorrect time settings are rejected You can select and set e the kind of programme TV radio or On Air Download e the programme position with the programme name e the starting time day month year hour minute e the end of the programme e the timer status no once daily weekly for 14 timers Leading zeros must imperatively be entered for the time settings Carry out each setting with the keys or gt and the number keys As the current time automatically appears when the starting time of the programme you wish to record is to be entered you have to re enter the correct starting time Unless otherwise entered the recording is automatically finished one hour after the start of the recording on the same day Timer Settings VPS Signal Confirm your settings by pressing three times If you have timer preprogrammed a download all succeeding
29. egistered networks they will be selected registered The cursor will change over to the right hand window for the more detailed installation if you press OK for a seleoted network the oursor will ohange over to the right hand window If you press either lt or For a seleoted network this will be deactivated deselected Now press x for the help function in the menu item system parameter Find detailed descriptions of the menu functions called up in each corresponding chapter of this manual 15 On Screen Display OSD Channel Confirmation TV Problem Report 16 Press 1 to exit the help function and to get back to the main menu Get back to the current programme by pressing en once more md Lunge dr ckte Im Laufe dieser ETI Bereich 1 fi 4 MDR FERNSEHEN AU vi DE 18 20 18 50 jr 71 tse gt THE TPL TTT ET LOI Ls IE CILA Penan hihrta 1 The channel confirmation is displayed for several seconds every time you change channels or every time you press ey The antenna icon in the top left corner indicates the reception of a programme even though no picture can be seen e g radio The TV icon indicates a TV channel along with it the current programme the reception of vid eotext if so and the time are displayed The icon in the third line indicates the programme selection from the overall programme list If the favourite list is called up the apple icon is displayed
30. enu Select the position system parameters by pressing DO and confirm with 05 System Parameters f D enta ntro A System Information Local time Timer dd mmiyyyy hhimm DL Saving No A V Mode CVBS TV Type MULTI Aspect Ratio Screen P S D OK gt Next MENU EXIT Prey Now select position parental lock with the keys 00 and confirm with ex As the case may be you are asked to enter your password 43 Password Parental Control Lock Channel Editing Lock Installation New Password Verify Password Personal D MENU Main EXMP Prev You can make the following settings here Age limit This setting is only active if the appropriate lock signals are broadcast Locking lists Yes No The edit function for the channel list can be locked and allowed respectively Locking installation Yes No Access to the installation menu can be locked and allowed respectively New password Use the number keys to enter your new password Confirming password Use the number keys to enter your new password once again for confirmation Personal Enter the receiver ID which the receiver reports when you switch it on This may serve as an useful help to identify it in case of theft Refer to paragraph instructions on operation to find out how to use the number keys of the remote control for numeric character entries The factory setting is UFD 574 Now you have made all the settings for the protecti
31. er Video signal generated from three individal colour signals red green blue 21 pole connection cable Operational readiness Super Video Home System Video recorder standard Transmitted data rate of the transmit signal Time function for pre programmed recordings See encyclopaedia 63 Service Picture format Antenna supply x German x 4 3 Operation Stand by x ON x x x 16 9 x OFF x Further settings internet http www kathrein de 936 2719 A 0505 ZWT Subject to technical changes KATHREIN Werke KG Anton Kathrein Stra e 1 3 PO Box 10 04 44 D 83004 Rosenheim Germany Telephone 49 80 31 1 84 0 Fax 49 80 31 1 84 3 06
32. er ddimm yyyy hhimm DL Saving No AIV Mode CVBS TV Type MULTI Aspect Ratio Screen PIS IS Prev Select the menu item system parameters with 00 and in the main menu Call up the further positions with AO The basic settings which can be made here are described in chapter password parental lock settings System information contains unchangeable factory settings intended only for the servicing staff Press to get back to the sub menu system parameters The receiver displays the UTC United Time Coordinate formerly Greenwich Meantime which is transmitted in the data stream This means that the time has to be corrected by 1 hour for Germany If necessary the daylight savings time has to be corrected so that the timers function duly You can correct it yourself with the gt keys by the half hour Use the 4 keys to scroll the selection cursor to local time timer Press twice to confirm your entry The receiver stores the new setting After this setting do not switch off the receiver with the power switch but with the remote control as otherwise the new settings will be lost You can correct select the daylight savings time yes no with the OO keys Use the gt keys to set the type of TV set you have namely either e PAL 53 Setting the System Parameters Picture Format Screen A V Mode Factory Setting 54 e Multi Standard or e NTSC Confirm by twice pressin
33. g E Use the oo keys to select the picture format your TV set is suitable for namely either e 4 3 e 16 90r e Auto Confirm by twice pressing Ex Use the J keys to set the kind of screen presentation e Normal P S normal presentation for 4 3 TV sets or e Wide Letter Box Display off in this setting the wide picture format for the 16 9 TV set is imposed on Confirm by twice pressing Ex Use the oo keys to select the type of video signal on the Scart Socket Select the signal your TV set can process Refer to the manual of your TV set e Composite Colour Signal e RGB Red Green Blue signal or e Y C S VHS signal Luminance Chrominance Confirm the selection by twice pressing En In this position you can reset all settings to the factory settings by pressing ex The factory settings need not necessarily correspond to the settings required for your receiving installation It may well be that you will have to make all settings once again after a reset Recording Replay Please refer to the connection scheme at the end of this manual and to the manual of your video recorder in order to find out how to con nect your video recorder to your receiver For a VCR recording either the satellite receiver has to be switched on or the timers have to be programmed see paragraph timer set tings For VCR replay the satellite receiver has to be switched to stand by so that the signal path can be
34. instead fol lowed by the programme title and the starting time and the end of the current programme provided that this information is broadcast by the programme provider Information 4 MDR FERNSEHEN 18 35 CRUE Brisant 18 20 18 50 Bad or no signal indicates a problem in the receiving installation or in the receiver settings respectively or a non transmitting transponder Check the antenna connection and the antenna configuration Use the service settings list on the last pages of this manual for support On Screen Display OSD Channel List TV RY Channel List All List Bereich 1 NDR FS SH gt ICH 43 650 0 MHz NDR FS MVP pune 8 MHz ARD DEL LOCK ADD MOVE TP MODE D gt Page Up On OK gt Watoh MENU Main EXIT Exit D Moye Press lok to have the channel list displayed Find the icon for the overall list in the top left corner Find indications of the channel the programme provider and the information whether the programme is scrambled or not in the column underneath The specifications to the programme received the net and its channel are displayed in the right upper column You can select the desired programme either with the selection cursor or by numeric character entry with the number keys Confirm your entry by pressing ex Find the menu item programme channel settings in the right bottom corner The programme channel factory settings can be changed there Press
35. isk contents are displayed By pressing you get back to the original programme Receiving another programme is not possible while a programme is being recorded on the hard disk However you can stop the recording yourself too To do so press or the hard disk contents are displayed By pressing en once more you are asked whether you want to stop the recording confirm that with e Then recording stopped is displayed on the screen and the HD programme overview is retained The programme recorded as far as that is indicated at the end of the list Press to have the ordinary TV screen again Hard Disk Recorder Special Functions Replay and Record Replay You can have more functions of the control panel displayed while you are recording a programme First press x or e then es Clear skip points Split take 00 00 00 00 00 19 Modemacher e Lock yes no parental lock on off replay is locked password e Index items delete no function on recording e Record split no function on recording The functions can be set with the cursor keys If you want to jump in an earlier recorded programme but do not want to stop the recording you first have to get back to the hard disk contents in current recordings press 1 to get there Use the DO keys to select one of the previous recordings and start the replay with The indication REC behind a programme title tells that this programme is jus
36. ist Select the position of the channel you want to delete by pressing P and 0 Now confirm deleting the channel by pressing the blue B key The following question is now displayed on the screen Confirm the desired procedure by pressing the corresponding key OKIL Press 0x to have the channel deleted The changes in storage are confirmed and the programme of the next channel on the list is on the screen 31 Channel List Adding channels manually 32 This function is only necessary for channels which are not broadcast in DVB standard All channels conforming to standards are recognised and stored in the automatic search Basically you need to follow almost the same procedure for adding a channel as for sorting a channel Press 0x to call up the channel list Press and the menu item adding a channel is displayed on the screen Add Digital Channel CH Number GH Name Video PID Audio PID Y MENU EXIT Prev You can make your entries for the new channel here The first line in the list is highlighted with a coloured bar Press 00 to scroll the bar up or down to the desired position Setting the respective position that is to say the respective entry is effected with the I keys and the number keys e Each network received e the channel e the channel name can be set On the positions e Video PID Programme Identification e Audio PID and e PCR PID PCR Progra
37. ived Ghosts are a thing of the past Connect the receiver either to your conventional house distribution or community antenna net with which you receive all VHF UHF signals or use one of Kathrein s special DVB T indoor antennae for the reception of the TV signals direct in your living quarters Even DVB T cannot work wonders a strong reception signal is required Consequently problems may arise in concrete buildings if you merely use an ordinary indoor antenna Presetting of the receiving Antenna TV VCR AUX Connection Audio Connection Dolby Connection If you have to use an active antenna i e an antenna with pre amplifier you can energise this antenna via the antenna input of the receiver OFF is preset to avoid any damage The use of an antenna suitable for 5 V supply voltage is imperative see page 17 Connect the receiver TV Scart socket to the TV set with a Scart cable If you have a stereo TV set you can receive stereo sound via the Scart connection Use a Scart cable to connect either a video recorder or a DVD recorder to the VCR AUX socket For sound reproduction via the HiFi unit connect the audio Cinch sockets to the input sockets of the HiFi unit with an appropriate cable The electrical Dolby Digital data stream output AC 3 is solely provided for connecting a Dolby Digital unit Putting Batteries in the Remote Control te E Remove the lid of the battery case on the back side of the rem
38. ke Merely press the keys DO after you have switched on the receiver to change channels in their ascending or descending order in the pro gramme memory The selected programme with the current time the videotext icon if available the starting and end of the programme and the program metitle are displayed in screen inserts after every keypress but merely if this information is broadcast by the programme provider By pressing 5 you can have this information permanently displayed and you can blank it by pressing the key once more 2 2 Za an MA er wi wed 5 Mat Bereich 1 A tee 4 MDR FERNSEHEN AU 11 D 18 20 18 50 If a programme is scrambled the information scrambled programme is displayed Receiving such programmes is not possible with the UFD 574 receiver 19 Programme Selection RY Channel List All List Bereich 1 NOR FS SH ICH 431 650 0 MHz NDR FS MVP Auto amp MHz ARD FAV DEL LOCK ADD MB MOVE MODE y gt Page Up On OK gt Watoh MENU Main EXIT Exit 9 Move Alternatively you can change channel by pressing ok Then the TV programme list is displayed You can obtain information on the net the channel the carrier number and the programme on the right upper column The column on the left indicates the programme position the programme name the kind of the received signal FTA scrambled as well as the favourites and locked channels Press DO
39. layed in current and total length The four step function slow motion cannot be called up the control panel is displayed on the screen during the replay of a recording Further functions of the control panel can be displayed during the re play of a recording First press x or ex only if control panel is not yet displayed and then D to have the further functions displayed Clear skip points Split take a 00 03 31 00 04 34 Kleine Planeten Gute Reise Bing e Lock yes no parental lock on off replay is locked password e Split record Record is split on the current point e g on recording of two succeeding programmes The individual functions can be set with the cursor keys Hard Disk Recorder Setting and Deleting Indices Delayed Replay Audio Mode Search Visible Search Time Controlled Search Freeze Image Slow Motion During the replay of a recorded programme you can set indices by pressing The episode you set between two indices will now be skipped on the next replay e g for films and recordings without advert breaks Indices can only completely be deleted in a recording see screen shot above You can interrupt a current recording by pressing Mm in the background the recording is continued Press to continue the recording just where you stopped it Press to rewind the current programme to search scenes and have them repeated by pressing
40. mme Clock Reference Only alphanumerical or decimal entries are accepted Channel List Press to get back to the channel list The storage of your entries is confirmed and the information on the currently set channel is displayed on the screen for a few seconds The new channel is added to the channel list Find out the necessary PIDs in the relevant magazines and on the internet among others Learn how to make alphanumerical entries in chapter instructions on operation Never change the PID specifications without cause as they affect the recognition of the received signal 33 Programme Overview EPG 34 Press to get an overview of the programmes broadcast in the cur rently received network inclusive the time and the length of the pro gramme but only if this information is broadcast via the Electronic Programme Guide EPG as it is the case with ARD and ZDF The programme title is told in short form in the column on the right In the column on the left you can scroll the cursor with the 00 keys to the programme you want to change to with ex By pressing the green 8 key current succeeding you can obtain in formation on the succeeding programme of the programmes listed By pressing the blue key extended further information on the pro gramme is displayed By pressing the yellow 8 list you can obtain information on the programme succession of the currently received channel inclusive
41. o that nobody else can watch them see chapter password Each selected list is highlighted with a coloured bar The selected channel is displayed in the top right corner of the screen You can give the individual favourites names and compile e g programmes in favourite list 1 which mostly show feature films or sporting reports You can also enter the users names e g Tony Hartmut granny granddad By pressing you get in the mode writing The first letter is now marked Use the number keys to give your favourites new names How to make numeric character entries is explained in chapter notes regarding operation 27 Channel List Confirm your entries by pressing ex You get back to the channel list Press to get back to TV The storage of your new settings is con firmed and the information on the current programme is displayed on the screen for a few seconds Calling up a favourite programme First press e then the red key Now you can select the individual favourite lists with the 4 keys Confirm your entry with ey TY Channel List A JEL LLA ADD MOVE TP MODE OK Seleot MENU EXIT Exit First select the apple icon line with the 00 keys then the desired list with the gt keys in this example granddad The desired favourite list is displayed after pressing ex 28 Channel List a LA Press DO to select the desired programme it is highligh
42. on and the identification of your receiver If you have forgotten or lost your password please contact your local dealer to unlock your receiver 44 Password Parental Lock The procedure for distinguishing the favourite programmes is similar to the procedure for setting the parental lock in order to avoid children having unauthorised access to certain channels The locked channels are indicated with the padlock icon in channel lists TV or Radio Press ox to call up the TV channel list KRY Channel List All List Bereich 1 NDR FS SH ICH 43 650 0 MHz NDR FS MVP funy 8 MHz ARD Hr fernseh ADR FERNSE ESS FAV DEL NDR FS HH WDR K ln LOCK ADD MOVE 1 MODE D gt Page Up On OK gt Watoh MENU Main EXIT Exit 0 9 Moye Use the keys DO down or eo page per page to select the channel you want to lock The selected channel is highlighted with a coloured bar Press the green 8 key to confirm the selection the padlock icon appears in the bar You automatically get to the display of the channel next in the list Press the green key to lock a further channel or get back to the channel just locked by pressing the cursor keys The channel will be unlocked again if you press the green key once again In this case the padlock icon disappears Press ox to confirm your changes On calling up the locked channel this channel is locked is displayed and the channel cannot
43. ote control Put the batteries enclosed in the remote control Mind their correct polarity It is indicated in the battery case Insert the lid in the sliding ledge and slide it on until it snaps in Used batteries are hazardous waste Never throw out used batteries as hazardous substances do not belong in domestic waste Turn the batteries in a collecting point for used batteries Electronic equipment is not household waste in accordance with directive 2002 96 EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 27th January 2003 on used electrical and electronic equipment it must be disposed of properly At the end of its service life take this unit for disposal at a relevant of cial collection point Initiation The first Steps e Make sure that you connected everything correctly e Connect the receiver to the wall outlet e Switch on the receiver by pressing the power switch on the front panel The red LED and the figures on the front panel start flashing The receiver is now in stand by mode Press on the remote control to switch the receiver to operational mode A programme position is displayed after the receiver is switched to operational mode 13 Initiation Initiation with BZD 30 indoor Antenna 1 Switch on both the TV set and the receiver Press O Stand by on the remote control to switch the re ceiver to operational mode LED flashes green 2 Switch the TV set to AV mode unless it switches a
44. ragraph instructions on op eration how to proceed In order to delete a network call up the network configuration scroll the cursor with 2 or Y and press amp or gt You are now asked whether you want to delete the network Either confirm with ox or dismiss with E Network Configuration u Bereich 2 Bereich 4D xmi Bereich 4 rower urr Bereich 5 Stand By OFF Bereich 6 Bereich 7 Bereich 8 P gt Page Up On OK Edit Installation Antenna Alignment Please mind the suppor tive information you can read in the individual menu items by pressing x The menu item antenna alignment will come in useful for this proce dure Here you can see some technical data which are merely intended for the servicing technician The entries with the network name and the reception channel are significant for you Here area 1 and CH 43 If you have already been receiving a signal you will be able to see to bars in the left column indicating the level and the quality of the re ceived signal Antenna Setup Tx Mod Bandwidth Guard Interval Mapping P MENU Main EXIT Prey You can now change the antenna location or if it is a directive an tenna slowly pivot it On doing so observe the maximum of the left bar before fixing the an tenna in an appropriate way 49 Installation Automatical Network Search Please mind the suppor tive information you c
45. rol 10 Notes regarding Operation 25 22 42 22402480 cansccceeses cits caneateneapaciie FAA N pA Aaa aA ARAINA AS 11 Language Selection mesiana ier Rene A te teed Mined 11 Menu CONCEP sise na td e aa ee a See 11 AlphanUume rical ENTES ariran iene nie e a ea tanda 11 Gonnection and Initiation icici i aea araa nennt etic ces reran a e aA E este tus dunere era na nn Gt CR es b anim nier entrent tes 12 Antenna Connection steni ri nevis rer e a aea eee eae tea terete eta 12 Presetting of the receiving Antenna sisi 12 TVIVGRIAUX Connection sitiado nennen taal Shane esl in den dent ed 12 Audio Connection yasni ao ta ta teles rer 12 Dolby Connection erine tii dt Ma een hea dada 12 Putting Batteries in the Remote Control ss 12 INIIAtION ciar EE E E pad 13 The ISE EDS orante EEE PER PR ES igus tines ss aaron 13 Initiation with BZD 30 indoor Antenna sisi 14 On Screen Display OSD a a s 15 Important Information displayed on the Screen ss 15 Aep FUNCIO ET 15 Channel Confirmation TV ccccccceceececcececeeeeeeeeeeanaeceeeeeeeseaaanaeceeeeececcaaeaeeeeeeeeeeseccaeaeceseseseennasaeeeeeeneees 16 Problem REPO itisenii222 sects soetebee saa peace ts wichita nada seed ose de cpabaands th IrDA ada nerd 16 Channel Pist IW E NO 17 Videotext Subtitles a a o iia 18 vale O ESA EE th Re pation 2c E EEEE O E EA 18 S DI AS a aa A A ane 18 Programme Selection niise E E AE S E ESEA NEENA A EA AEEA aa aa 19 Selecting a TV Programm
46. sword if acti vated scroll to the submenu installation Select network configura tion by pressing Now you can add or select a new network Network Configuration Bereich 1 Bereich 3 Bereich rower Bereich 5 Stand By Bereich 6 Bereich 7 Bereich 8 OK D PEAP Page Up On OK Edit Consider that your installation must be set accordingly In the next step e g scroll with the keys 00 to a desired entry area 2 or any other After pressing O or gt the question whether you want to add the network is displayed on the screen Confirm by pressing ex The following is displayed You can now use the keys 4 4 and G or gt to make the entries in the respective positions according to your receiving installation Press three times to exit the menu while the new station data are being stored Under point operation you have to enter whether your active antenna is to be fed by the receiver Under point stand by you have to enter whether the supply voltage is to be disengaged when the receiver is switched to stand by 47 Installation Entering the Network Name Deleting a Network Please mind the suppor tive information you can read in the individual menu items by pressing G 48 Scroll the selection cursor to the existent network name via active an tenna The first letter is highlighted You can now change the network name with the number keys Find out in pa
47. t being recorded While you are watching an earlier recorded programme the programme selected before is kept on being recorded The recording time in EPG starts automatically stops 5 min after the end of the programme title Without EPG the recording time is automatically preset to 2 hours You can change this with amp gt or by numerical character entry The recording is stopped when the hard disk is full and has no more capacity In order to play a hard disk recording press first The hard disk contents showing the recordings on the hard disk are displayed If there is no recording stored you are informed correspondingly 39 40 Press to blank out or discontinue the menu Press DO to select a recording and start playing it with ox The re corder plays the recording you selected HXXX is displayed on the LED At the end of the replay the receiver switches back to hard disk contents During the recording you can call up the control panel by pressing either x or ey cor La En p 00 02 09 00 04 34 Kleine Planeten Gute Reise Bing js You can also follow the replay functions on the displayed control panel The current programme is displayed in the left upper bar and from the bar on the right you can tell the remaining length of the re play The icon for the replay function just selected is displayed on the left next to it the current time value of the replay is disp
48. tching the current programme by pressing twice If you want to continue with the recorded film change to the hard disk mode and call up the film by pressing The replay starts just where you interrupted it before provided that you have neither switched the receiver off nor to stand by in the meantime After pressing or automatically at the end of the recorded film the receiver switches back to the hard disk contents Press to exit the menu and get back to the programme you watched last In order to delete a recording let the hard disk contents be displayed by pressing Use the 0 0 keys to select the recording you want to delete and press the blue 0 key You are now asked whether you really want to delete it and can confirm with or cancel with en Recordings are irrepealably deleted While recording a programme you cannot delete another recording already stored on the hard disk Password Factory Settings Password Entry You can provide your satellite receiver with a password protection against unauthorised access Thus the reception settings of the re ceiver cannot be changed by foreign or unauthorised persons Also you can activate the parental lock function which certain programmes can be locked with Keep the password in safe custody so that you always have ac cess to your programmes even if you have forgotten the pass word The password 0000 is factory set Press D to call up the main m
49. ted with a coloured bar and displayed in the right upper corner on the screen Press 0x to call up the desired programme If you wish to cancel one of your favourite list entries select the corresponding favourite list in which this entry is stored with 00 and e delete the apple icon by pressing the red key and confirm your entry with ex EMS TSA AB a If you want to get back to the channel list display of all programmes of the networks which are set press then press 00 to select the network line then select all networks with J gt Press 0x to have the current channel list displayed 29 Channel List Alphabetical Channel Search You can have all the channels with the same initial letters displayed in one list Consequently you can very quickly pick out a certain channel from the overall channel list Press ox to call up the channel list Press to call up the channel list mode Press 00 to select the bar alphabet LA La EJ pi 2 a Find the desired letter by pressing gt Each letter is shown in the alphabet bar 23 L 3 HD SEAT Ta Press ox when you have found the desired letter Then all the channels the names of which start with this letter are listed and displayed 30 Channel List Channel sort Function Deleting Channels Be careful when delet ing channels You can determine the desired channel with th
50. to the TV programme via manual audio PID input After the PID input the receiver automatically selects the audio data identified by the PID from the data stream and assigns them to the video signal For the most part the channel package contains several TV and radio channels Each channel package is fixedly assigned to the transmit frequency the polarisation horizontal or vertical the symbol rate and the Viterbi rate or error rate The symbol rate describes the amount of data transmitted per second The symbol rate is measured in MSymbole s and equal to the amount of symbols coming in per second The video bit rate describes the amount of data of the digitalised video signal transmitted per second The Viterbi rate Code rate error rate characterises the type of error protection utilised by the programme provider The DVB standard determines the following values 1 2 2 3 3 4 5 6 7 8 Glossary Audio output AV programme position DVB Eb No Eb No ratio LED Display Mute OSD PAL Pay TV PIN Receiver RGB Scart cable Stand by S VHS Symbol rate Timer function Viterbi rate Audio output on the receiver Favourite programme position of the TV set for the Scart input Digital Video Broadcasting Power density per information unit Digital signal to noise ratio Display on the receiver Mute function On Screen Display Analogue television standard Pay TV e g Premiere Personal Identification Number Receiv
51. u can also find information on this procedure there 57 Technical Features 58 Reception of all DVB T TV and radio programmes Free to Air Looped through antenna input 1 000 programme memory positions Integrated 80 GByte hard disk for up to 56 hrs recording capacity Electronic Programme Guide EPG spanning several days and brief descriptions of the programmes Timer programmable for 14 programmes Timer pogramming via EPG Software update for operational software and channel list on air optionally via antenna and RS 232 serial interface Screen inserts On Screen Display OSD in 8 languages German English French Italian Dutch Portuguese Spanish Turkish LED displays for operation stand by and RCU reception Videotext generation display on TV set via internal receiver 4 3 and 16 9 format recognition choice of viewing format Composite colour YC S VHS and RGB signal output programmable via Scart socket Manual input of PID data Programme search 2 Scart sockets Audio output via Cinch sockets S PDIF IEC 958 Dolby Digital audio output AC 3 Radio key Volume adjustment and mute function Automatical date and time setting via DVB data stream Programme position sort function Infra red remote control RF level display External infra red sensor for hidden placing of the receiver accessory Operation of an active DVB T indoor antenna e g Kathrein BZD 30 possible without additional power supply unit
52. us called up the sub menus the positions as well as the pa rameters to set are highlighted in colours The menus are self explanatory to a large extent Main Menu D TOK Next MENU EXIT Exit Press D to call up the main menu call up the corresponding sub menu by pressing DO and ex The positions in the sub menus are called up by pressing the DO keys The settings in the positions are effected either with the keys or the number keys Press either E or er to exit the main menu and the sub menus Use the number keys for entering programme and network names They create figures and letters in the name fields of the corresponding menus Scroll the selection cursor to the name field The first position is automatically highlighted in dark grey Now you can enter letters in addition to figures by pressing the respective number key several times This means that A B and C e g are assigned to key 2 see photo Connection and Initiation Antenna Connection This paragraph is intended for the specialised dealer You only need to observe it if you install the receiver yourself Find an exemplar configuration in chapter connection example Do not connect the receiver to the wall outlet before all installation work has been carried out In this connection please observe chapter safety instructions DVB T has been developed to allow for good TV reception everywhere an adequate signal can be rece
53. utomatically 3 In order to activate the voltage supply of the antenna carry out the following steps with the remote control of the receiver 14 Press to enter the main menu Select the sub menu installation with WG and confirm your entry with ex Now select net configuration with WG Press to con firm your entry Presse once again to call up operation Now change the selection for the supply voltage from OFF to ON by pressing ao see photo Network Configuration Bereich Bereich 1 Bereich 2 Active Antenna Bereich 3 Bereich 4 Power OFF Bereich 5 Stand By OFF Bereich 6 Bereich 7 Bereich 8 D P P Page Up On TOR Edit Now the antenna is energised with 5 V Press four times to get back to the TV mode On Screen Display OSD Important Information displayed on the Screen Help Function The receiver functions are controlled by a micro processor and by ex tensive software The following explanations will help you understand all procedures and prevent errors By pressing x in the individual OSD s you will obtain detailed infor mation on the further procedure You can call up the help function for every menu item and every menu function This help function provides a brief description of the most important functions in the menu items called up Example Press to call up the main menu Bereich1 If you press either or gt for unselected non r
54. with our customers requirements and with the best available technology Find more information on this in chapter software and channel list updates Keep the original packing for any reconsignment In consequence of the design a hard disk is susceptible to shock It is properly protected against damage on reconsignment only if the receiver is sent back in the original packing Improper packing on reconsignment causes loss of any claim under guarantee for the hard disk Currently no radio programmes are being broadcast on the radio channels However this may change in future Then you will be able TVR to change over from TV to radio with the TV Radio key Operation will be carried out along the same lines of TV operation Contents Preta id 2 Radio Programmes umi A ded abd 2 COMAS se A A A AS 3 Safety IMnstructi hS seoski RE 5 AAA E E T 6 Factory seting of the Recoon airaa rar tn Isar eR EER AEAEE ae 7 Control Elements Indications and Connections nn nana ra rra nnrnnananan cnn nennannnaanens 8 Miew Front Panel a nr O get thats a deo te 8 View Back Panel en et hens aaa ne ee te a i a 8 Control elements and indications on the front panel 8 Control elements and connections on the back panel 8 Remote Control Menu Functions ss eeeeeseeeeeeseeee ees aeeeaeee sees sa aesaseaeeeseeseee sens seaeeseeeseaeeesnenees 9 RC 660 Remote Controls cic sr tt edt ats 10 Alphanumerical Assignment of Number Keys on the Remote Cont
55. y as otherwise the manual search cannot be carried out Channel input Select the respective channel with the eo keys or with the number keys To do so press and enter the desired channel number After pressing ox once more the channel with the respective frequency is changed Frequency input This function is only intended for the servicing staff and allows for the manual input of the channel frequency 51 Setting the System Parameters You had better not change the following settings without cause as they are either factory settings or settings for the operation of the re ceiver which are syntonised to your receiving installation or location Merely changes in the receiving installation might require new set tings The menus submenus and positions called up as well as the parame ters to set are each highlighted in colours The menus are mainly self explanatory You can obtain supporting information on each menu called up by pressing i Exit this help function by pressing x once more Main Menu installation Language D TOK Next MENU EXIT Exit The main menu which you always call up with includes the following sub menus e System Parameter e Installation e Menu language 52 Setting the System Parameters System Parameter Parental Lock System Information Local Time Timer Daylight Savings Time TV Type System Parameters System Information Local time Tim
Download Pdf Manuals
Related Search