Jwin JX CD8500 User's Manual
Contents
1. e the Speaker Units carefully and store them as required2. jWIN INSTALLATION FOR ASSEMBLY OF JX CD8500 JX CD8500D Main Unit Assembly Locate the Main Unit s pedestal Notice that its two legs are mounted closer to one side of the pedestal s base than to the other Position that side of the pedestal so that it faces you as shown in the diagram At this time also check that the small platform above the pedestal is oriented as shown in INSET 1 Carefully lift the Main Unit by grasping its top rear extension with one hand and its bottom with the other Place one foot on the base of the pedestal to steady it INSET 1 and with the Main Unit facing you align the Main Unit s PEDESTAL bottom groove with the mating groove atop the pedestal Slide the Main Unit all the way onto to the pedestal until it stops At the rear of the Main Unit push the pedestal s two locking flaps UP see INSET 2 until they click and lock the Main Unit in place Position the pedestal Main Unit assembly in the desired location in your premises Main Unit Disassembly Locate the two locking flaps on the pedestal s platform see INSET 2 and push them both DOWN to release the Main Unit from its locked position Place one foot on the base of the pedestal to steady it and then carefully slide the Main Unit forward and off the pedestal X by supporting it with one hand at the Main Unit s top rear extension LA and the other hand at its base Handle the Main Unit carefully and store it a
3. s required INSET 2 SPEAKER e INSET 3 Speaker Unit Assembly Locate the two pedestals used to support the two Speaker Units NY Notice that the leg on each pedestal is mounted further away from one side of the pedestal s base than it is from the other side Place each pedestal so that the side of its base that is further away from its leg is facing you Check the diagram at the right and INSET 3 for the correct position of each pedestal UNIT S Lift up one of the Speaker Units Place a foot on the base of one PEDESTAL pedestal to steady it and align the bottom groove of the Speaker Unit p with the mating groove atop the pedestal Slide the Speaker Unit all the Pa way onto to the pedestal until it stops lt Y a At the rear of the pedestal push the two locking flaps UP until they Iw l A Oe click and lock the Speaker Unit in place SZ Repeat the above steps for the other Speaker Unit and pedestal Position both pedestal Speaker Unit assemblies in the desired location in your premises R Speaker Unit Disassembly Pal Locate the two locking flaps on the pedestal mount and push them w both DOWN to release the Speaker Unit from its locked position Yeas Place one foot on the pedestal s base to steady it and then carefully slide the Speaker Unit forward and off the pedestal Repeat the above for the other pedestal Speaker Unit combination Handl
Download Pdf Manuals
Related Search