Jwin JL-355 User's Manual
Contents
1. POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked on or obstructed by items placed upon or against them Pay particular attention to cords at plugs convenience receptacles and the point at which they exit from the appliance CLEANING The appliance should be cleaned only as recommended by the manufacturer POWER LINES An outdoor antenna should be located away from power lines NONUSE PERIODS The power cord of the appliance should be unplugged from the outlet when the appliance is to be left unused for an extended period of time OBJECT and LIQUID ENTRY Care should be taken so that objects do not fall and liquids are not spilled into the device s openings CARTS AND STANDS The appliance should be used only with a cart or stand that is recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn WALL OR CEILING MOUNTING If the appliance is mounted to a wall or ceiling it should be mounted only as recommended by the manufacturer Printed in China USER SAFETY GIUDE IMPORTANT SAFETY PRECAUTIONS CONTINUED 17 DAMAGE REQUIRING SERVICE The appliance should be serviced by qualified service professional when a The power supply cord or plug has been damaged b Objects have fallen into or liquid has been spilled into the2. 3 SNOOZE button 7 VOLUME dial 11 TUNING button 4 ALARM 1 button 8 TIME SET MEMORY button 12 AUX IN jack Power Source e AC Power Plug the AC power cord into the standard household outlet Caution Before connecting the unit to power please make sure your local voltage is the same as marked on the back plate of the unit e Backup battery Install 1 5Vx2 AAA UM4 size battery not included into the battery compartment and close the lid securely These batteries are to keep the clock running when the AC power is disconnected Caution Make sure the positive and negative battery terminals are attached to the corresponding plates in the battery compartment Printed in China OPERATIONAL INSTRUCTIONS Setting the Clock 1 Press and hold TIME SET MEM and the hour will flash 2 Press TUNING to find the correct hour setting 3 Press TIME SET MEM again the minute will flash 4 Press TUNING to find the correct minute setting vang the Radio Press STANDBY to turn radio on Press SOURCE to select FM or AM mode Select your desired station using TUNING Turn the VOLUME CONTROL knob to adjust volume as needed Press STANDBY to turn radio off OF a IN ae to Radio Repeatedly press ALARM 1 2 until RADIO icon appears on the LCD screen to indicate alarm status Press and hold ALARM 1 2 and hour will flash Select your desired wake up hour using TUNING Press ALARM 1 2 and minute wil
3. RUCTIONS The safety and operating instructions should be retained in a secure place for future reference 3 HEED WARNINGS All warnings on the appliance and in the operating instructions should be observed 4 FOLLOW INSTRUCTIONS All operating and use instructions should be followed 5 WATER AND MOISTURE The appliance should not be used near water For example near a bathtub kitchen sink laundry tub and swimming pool or even in a wet basement 6 VENTILATION The appliance should be situated so that its location and position does not interfere with its proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or be placed in a built in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings 7 HEAT The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat Printed in China USER SAFETY GIUDE IMPORTANT SAFETY PRECAUTIONS CONTINUED 8 10 11 12 13 14 15 16 POWER SOURCES The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance GROUNDING AND POLARIZATION Precautions should be taken to ensure that the grounding or polarization of the appliance is correct
4. appliance s apertures c The appliance has been exposed to rain d The appliance has been dropped and suffered damage e The appliance does not appear to operate normally or exhibits a marked change in performance 18 SERVICING The user should not attempt to service the appliance beyond that described in the user s operating instructions All other servicing should be referred to qualified service professional 19 PROTECTIVE ATTACHMENT PLUG The appliance is equipped with an attachment plug that has an overload protection This is a safety feature If replacement of the plug is required be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug UK Version Only FCC NOTICE USA This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation e To prevent fire or electric shock do not expose the unit to rain or moisture e Never attempt to open the cabinet Dangerous high voltages are present in the unit Always refer servicing to a qualified technician IC NOTICE CANADA This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations o
5. dio Reception is Unclear or distorted e Radio station frequency may be weak Adjust antenna or move near a window 4 Time is incorrect e Backup batteries may be dead Change batteries e Clock may not be set correctly Set the clock 5 Alarm does not function e The unit may not be set properly Select ALARM 1 2 and switch to Radio or Buzz e Make sure the clock is set properly e Make sure the alarm time is set correctly Cleaning the cabinet Do not use polish solvents or strong detergents to clean the unit The cabinet can be cleaned with a piece of soft cloth soaked with little water The power plug should ALWAYS be disconnected from the main power supply during the cleaning Printed in China USER SAFETY GIUDE IMPORTANT SAFETY INSTRUCTIONS WARNING To prevent fire or shock hazard do not expose this appliance to rain or moisture RISK OF ELECTRIC SHOCK DO NOT OPEN h CAUTION These markings are located on the bottom side or back of the unit CAUTION To prevent the risk of electric shock do not remove cover or back Non user serviceable parts inside Refer servicing to a service professional e The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person e The exclamation point wi
6. f Industry Canada Printed in China SPECIFICATIONS e Frequency Range o AM 530kHz 1710kHz o FM 87 5MHz 108MHz e Power Requirement o AC 120V 60Hz o Battery 1 5Vx2 AAA battery for clock backup battery not included e Power Consumption lt 5W e Unit Dimensions W x H x D 7 5 x 3 5 x 2 2 200mm x 88mm x 55mm e Unit Weight Approx 0 53kg Specifications and features are subject to change without prior notice Printed in China W N TEL 1 866 807 5946 www jWIN com 2010 jWIN Electronics Corp All rights reserved No portion of this printed material or product enclosed herewith including design shape and graphics may be reproduced or transmitted in any form without prior written consent of jWIN Electronics Corp by any means electronic or mechanical including photocopying recording or use of an information storage and retrieval system Any unauthorized distribution or reproduction of this printed material or product or any portion thereof will be prosecuted to the fullest possible extent of the law Printed in China
7. jWIN DUAL ALARM CLOCK with AM FM RADIO Instruction Manual JL 355 Please read this manual carefully before operating and save it for future reference Have a question Please visit http www jWIN com INTRODUCTION Thank you for purchasing the JL 355 Unpack the unit and make sure to put aside all accessories so they will not be lost We recommend that you retain the original packaging materials for future use should you transport or ship the unit in the future Features Digital alarm clock with 9 minute snooze function Integrated AM FM radio PLL digital tuning technology Programmable preset for 40 radio stations 20 AM 20 FM Wake to radio or buzzer Fall asleep to radio Dimmer button to adjust LCD brightness 3 5mm Aux in jack Built in speaker What s Included e Alarm Clock Radio Printed in China GETTING STARTED Location of Controls Top Back View 1 2 3 6 7 8 9 10 11 12 SS SSS E COO i t i ol AUXIN Dalat 0 0 6 0 0 0 0 Dn byl a i l i iL i U U U U U DaDa Onin Egg ilal 7 abal jeg bn eg ey vO A DW aba i Ing Daly a Ral est ea Pp OU D 0070 o 0 p _ e S 1 STANDBY button 5 TUNING button 9 Dimmer Hi Lo switch 2 Source AM FM AUX switch 6 SLEEP button 10 ALARM 2 button
8. l flash Select your desired wake up minute using TUNING ae oN Wake to Buzzer 1 Repeatedly press ALARM 1 2 until BUZZER appears on the LCD screen to indicate alarm status Press and hold ALARM 1 2 and hour will flash Select your desired wake up hour using TUNING Press ALARM 1 2 and minute will flash Select your desired wake up minute using TUNING Gl GN Alarm Duration and Snooze Function Alarm Duration Buzzer alarm or Radio alarm will continue output for 60 minutes if no buttons are pressed then it will stop automatically and sound again at same alarm time the next day Snooze Function 1 When the Alarm sounds press SNOOZE to enable the snooze function Buzzer alarm or Radio alarm will stop 2 The alarm will sound again in 9 minutes 3 Unless STANDBY or ALARM 1 2 is pressed to stop the alarm the Snooze function will continue for up to 60 minutes from the first alarm Printed in China OPERATIONAL INSTRUCTIONS Sleep Function 1 Press SLEEP to turn on sleep mode Repeatedly press SLEEP to adjust the duration between 90 min and 10 min 2 Press STANDBY to cancel the sleep function AUX in Jack 1 Connect the earphone socket from the Auxiliary unit e g MP3 player or MD player into AUX In Jack on the rear of this product When inserting an Audio line cord the main unit function will not work and automatically enter the Auxiliary AUX function 2 Press the PLAY button of the Auxiliar
9. thin an equilateral triangle is intended to alert the user to the presence of important operating maintenance and servicing instructions in the literature accompanying the appliance Dripping warning This product shall not be exposed to any dripping or splashing and no objects filled with liquids such as vases shall be placed on or near the product Ventilation warning The normal ventilation of the product shall not be impeded for intended use Minimum distances must be kept around the apparatus for sufficient ventilation especially while use of the apparatus is in tropical and or moderate climates Printed in China USER SAFETY GIUDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle bring it to a collection point for the recycling of electrical and electronic appliances This symbol on the product means the instructions for use or the packing will inform about the methods for disposal The a materials are recyclable as mentioned in its marking By recycling material recycling or other forms of re utilization of old appliances you make an important contribution to protect the environment Please inquire at your local community administration for the authorized disposal location IMPORTANT SAFETY PRECAUTIONS 1 READ INSTRUCTIONS All safety and operating instructions should be read before the appliance is operated 2 RETAIN INST
10. y unit Music from the Auxiliary unit can be listened through the speaker of this product 3 When using the AUX In jack Press SOURCE to select AM FM or AUX In Programming Radio Stations in Memory 1 The program memory allows you store 40 stations 20 AM 20 FM 2 In AM or FM mode select your desired station 3 Press and hold TIME SET MEMORY P 01 will blink on LCD screen 4 Press TIME SET MEMORY again to store the station You can select the desired program preset number 1 20 by pressing TUNING 5 Using preset station press TIME SET MEMORY P 01 will appear on LCD screen Press TUNING to select your desired preset number 6 If you wish to replace a memory position with a station other than the current one the new station can be programmed as described above This will automatically replace the original station Printed in China TROUBLESHOOTING GUIDE When the instructions in this manual are followed this unit should function properly However if any of the following difficulties occur and cannot be corrected by the user or if a problem arises that is not mentioned here please contact jWIN Customer Service or a qualified service technician 1 Unit Does Not Play e Unit may be disconnected from power source Check connection 2 No Sound Distorted Sound or Feedback e Volume control is turned down Please increase e The unit may be located where there is vibration Move unit if necessary 3 Ra
Download Pdf Manuals
Related Search