Home

JVC PD-35S50J User's Manual

1. The effect level of the picture motion compensation function cannot be changed The effect level is the same no matter which of the AUTO MIN or MAX settings is used AUTO The TV will automatically adjust the level of the DigiPure effect to match the amount of noise in the picture giving the best possible picture MIN The level of DigiPure effect 1s set to the minimum When you set the Super DigiPure function to AUTO and notice some noise change the setting from AUTO to MIN The MIN setting is not suitable for high quality pictures which contain very little noise MAX The level of DigiPure effect is set to the maximum If you set the Super DigiPure function to AUTO but feel that the original picture quality has not been reproduced fully change the setting from AUTO to MAX The MAX setting is not suitable for low quality pictures which contain a lot of noise OFF The Super DigiPure function 15 turned off MOVIE THEATRE The MOVIE THEATRE function displays a cinema film picture more smoothly and naturally on the screen AUTO The television automatically recognizes the type of signal and turns the function on and off ON This function is turned on OFF This function is turned off The motion may appear unnatural when viewing images with the NTSC colour system When the MOVIE THEATRE function 15 set to AUTO or ON the motion may appear unnatural when viewing images wit
2. No sound comes from the TV speakers when the headphones are connected Video or sound signal output from the EXT 2 terminal You can change over the output of the video sound signal from the EXT 2 terminal This is useful when you want to dub the video sound from another device onto the VCR connected to the EXT 2 terminal For details on how to do this see DUBBING on page 45 The signals from EXT 4 and PC IN terminal cannot be output from EXT 2 TV output from the EXT 1 terminal The video sound signal of a TV channel you are viewing is always output from the EXT 1 terminal Changing over a programme number also changes over the TV output from the EXT 1 terminal The video sound signal from an EXT terminal cannot be output Teletext programmes cannot be output Connecting speakers amplifier While referring to the audio equipment connection diagram connect the audio equipment you want to the TV You can use external front speakers to listen to the TV sound instead of the TV speakers Before connecting anything Read the manuals provided with the amplifier and speakers Turn the TV and amplifier off To prevent magnetism from the speakers adversely effecting the TV screen use magnetic shielded speakers for the front speakers Note that connecting cables are not supplied Back of the TV R L SUBWOOFER A C
3. 1 Press the V A buttons to choose a To cancel the ID function 40 TV channel Every time you press the V A buttons the programme number PR changes and the picture of the TV channel stored in the programme number PR appears on the screen Press the red button to start the ID function ID LIST 6000 D0031 EN Press the V A buttons to choose the first character of a channel name ID you want to give the TV channel ID LIST 6000 D0032 EN Press the BACK button 6 Press the OK button to give a channel name ID to a TV channel e You can give your own unique channel name ID to the TV channel When you have finished step 3 do not go to step 4 Press the lt P buttons to move the cursor and press the W A buttons to choose each character of the channel name ID Then press the OK button to register the channel name ID to the TV channel Before performing INSERT or MANUAL operation If you register the TV channel L system from a French station be sure to set the COUNTRY setting to FRANCE If the COUNTRY setting is not set to FRANCE perform steps 1 and 2 of the AUTO PROGRAM page 38 procedure and set the COUNTRY setting to FRANCE before pressing the OK button A CH CC number unique to this TV and corresponding to the Channel number of a TV channel is required Find the corresponding CH CC number from a table CH CC numbers on page 50 based
4. The still picture cannot be output from the TV The FREEZE function does not work for picture of PC signal 19 20 Remote control buttons and functions Using the MULTI PICTURE function 1 Press the button The MULTI PICTURE menu appears Li k D0101 EN 2 Press the lt gt buttons to choose the number of screens and then press the OK button Choose to return to one screen D0102 __2 Choose to change to 2 pictures multi D0103 __12 Choose to change to 12 pictures multi D0104 2 pictures multi Main Sub picture picture D0056 With 11251 and 750p signals the screen 1s split into two as shown below Main picture Sub picture D1056 12 pictures multi POE Ise LIL IL IE 10100 moving picture D0058 EN Changing the sub picture Displaying the next or 0 previous 12 screens When set to 2 pictures multi you can view a TV picture and a picture from an external device You cannot view a TV picture on more than one screen at the same time When 12 pictures multi is set pictures from external devices are not displayed When set to 2 pictures multi the main picture can be changed by pressing the P V A buttons The sub picture screen be changed by pressing the V A buttons When set to 12 pictures multi and there are more than 12 pictures the next or previous 12 screens can be displayed by pressing the V A buttons
5. 2 42 EXTSEMIINGS Sun au be 43 PIC TURE 45 Displaying a computer 46 Connecting to the 46 Looking at images from a computer 46 Table of signals for each type of COMPUTO ren bn she an 46 Additional preparation 47 Connecting external equipment 47 numbers nues 50 Troubleshooting 52 Specifications 54 Checking the contents of packages Check that all components are present Contact your retailer immediately 1f any components are missing TV and Wall mounting unit Remote control unit AA R6 batteries Ferrite core Hooks Mounting screws Power cord 1 RM C1811H 2 used to check operation 1 attach to power cord 2 to prevent the TV from falling 2 to fix the hooks Setting up your TV Be sure to have someone help you when you lift up the TV The TV is too heavy to lift up by yourself If the TV falls it will cause injuries and damage Installation When using a table top stand always use a JVC approved unit Warning for wall mounting unit Use only authorized service personnel to install your TV in order to prevent accidents Do not try to install your TV by yourself We sell this product on the understanding that it will be
6. 3D SOUND function You can enjoy sounds with a wider ambience This function does not work for the sound from headphones Press the button to select of 3D SOUND modes HIGH LOW When you listen to stereo sound please select HIGH or LOW mode You can enjoy sound similar to the experience at the theatre When you combine the functions of A H B and BBE you can enjoy more powerful sound When you set the 3D SOUND function to HIGH mode there may be slight volume distortion If that occurs please switch to LOW mode The effect of 3D SOUND functions will be less noticeable but the volume distortion will be corrected MONO Select the MONO mode when you listen to the mono sound You can enjoy the sound for a wider audience similar to stereo sound OFF The 3D SOUND function switches off You can choose the 3D SOUND mode with the SOUND menu see page 33 Return to TV channel instantly You can return to a TV channel instantly Press the TV button The TV returns to the TV mode and a TV channel appears Using the FREEZE function You can view the current programme as a still picture 1 Press the button The still picture of the current picture will appear current still picture programme 00056 cancel the FREEZE function Press the button the V A buttons or the number buttons The FREEZE function does not work while a sub picture is displayed
7. SEARCH FINE 6900 To cancel the MANUAL function Press the BACK button When the COUNTRY setting is not UNITED KINGDOM At the right side following the CH CC number the SYSTEM broadcasting system of the TV channel appears When the COUNTRY setting is UNITED KINGDOM Continue to step 4 When the COUNTRY setting is not UNITED KINGDOM Press the button to choose the SYSTEM broadcasting system for a TV channel you want to register TV channel SECAM L system from a French station Set the SYSTEM to L If it is set to one other than you cannot receive the TV channel of the SECAM L system Other TV channels If you do not know the correct broadcasting system set the SYSTEM to T If I is not correct you will not hear the sound normally when the TV detects a TV channel In this case retry to set the SYSTEM correctly so that no problem arises 41 SET UP menu 4 Press the green or red button to _ search for a TV channel Scanning stops when the TV finds a TV channel Then the TV channel is displayed 5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor Press the blue or yellow button to fine tune the TV channel 6 Press the OK button and register the TV channel to a Programme number PR The normal EDIT menu is resumed LANGUAGE The LANGUAGE setting which was performed in the Initial se
8. When you want to resume the previous ZOOM mode press the ZOOM button again If you bring magnetised equipment such as a speaker near to your TV the picture may be warped or unnatural colours may appear at the corners of the screen In this case keep the equipment away from your TV If speakers cause this to happen use magnetically shielded speakers instead It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed This is not a fault This is the time needed for the image to stabilize before it can be displayed The TV may make a crackling sound due to a sudden change in temperature The picture or sound may be normal If you hear crackling sounds frequently while you are viewing the TV there may be other causes As a precaution ask your service technician to inspect it Touching the screen may cause you to feel a slight electric shock due to its static electricity This is unavoidable due to the construction of the picture tube It is not a problem with the TV You can rest assured that this static discharge 15 not harmful 53 54 Specifications Model PD 35S50J COUNTRY setting When the COUNTRY setting is When the COUNTRY setting is UNITED KINGDOM not UNITED KINGDOM Broadcasting systems CCIR CCIR B G I D K L Colour systems PAL PAL SECAM The EXT terminals also support the The EXT terminals also support the NTSC 3 58 4 43 MHz system NT
9. 102 103 Size You can double the height of the teletext display Press the Size button 25 26 Teletext function Index You can return to the index page instantly Press the E Index button Returns to page 100 or a previously specified page Cancel You can search for a teletext page while watching TV 1 Press the number button to enter a page number or press a colour button The TV searches for a teletext page Press Cancel button The TV programme appears When the TV finds the teletext page its page number appears in the upper left of the screen Press Cancel button to return to a teletext page when the page number is on the screen The TV mode cannot be resumed by pressing the LI Cancel button To return to the TV mode press TV Using the TV s menu This TV has a number of functions you can operate using menus To use all your TV s functions you need to understand the basic menu operating techniques fully Buttons used to operate the menus QOS 4 Q Krr BACK Basic operation 1 Press the MENU button to display the menu bar E Al M D0105 EN PICTURE a 2 Press the lt gt buttons to choose the menu you want to use and then press the OK button le O1 0 roue D1105EN Chosen Chosen menu menu name 3 Press the V A buttons to choose the item to be set press the l
10. DELETE This function deletes a TV channel you do not want to list MANUAL This function manually stores a new TV channel in a programme number PR Caution Using the MOVE DELETE or INSERT functions rewrites the current programme numbers PR list Therefore the programme numbers PR of some of the TV channels will change Using the MANUAL function for a TV channel for which the CHILD LOCK function has been set cancels the CHILD LOCK function for that channel SET UP menu e Using the MANUAL function for a TV channel for which the DECODER EXT 2 unction has been set to ON returns the setting of the DECODER EXT 2 function for that channel to OFF When TV channel has already been registered in PR 99 using the INSERT function deletes that TV channel Basic operation 1 Choose EDIT MANUAL then press the OK or gt button The EDIT menu appears 315 DP D0038 EN 2 Follow the description for the function you want to use 3 Press the OK button to complete the settings The T V LINK menu appears T V LINK DOWNLOAD TV gt VCR 0005 If you do not have T V LINK compatible VCR connected Press the button to exit the T V LINK menu The T V LINK menu disappears If you have a T V LINK compatible VCR connected to the EXT 2 terminal Follow Downloading the data to VCR on page 11 to transmit the programme number PR data For p
11. E57 R57 CC 18 CC 218 518 CH 28 228 E28 R28 CH 58 CH 258 E58 R58 19 CC 219 519 CH 29 229 E29 R29 59 CH 259 E59 R59 CC 20 CC 220 S20 CH 30 CH 230 E30 R30 CH 60 CH 260 E60 R60 CC 21 CC 221 S21 CH 31 CH 231 E31 R31 CH 61 CH 261 E61 R61 CC 22 CC 222 S22 CH 32 CH 232 E32 R32 CH 62 CH 262 E62 R62 CC 23 CC 223 S23 CH 33 CH 233 E33 63 CH 263 E63 R63 24 224 S24 CH 34 CH 234 E34 R34 CH 64 CH 264 E64 R64 25 CC 225 S25 CH 35 CH 235 E35 R35 65 265 E65 R65 CC 26 CC 226 S26 CH 36 CH 236 E36 R36 CH 66 CH 266 E66 R66 CC 27 CC 227 S27 CH 37 CH 237 E37 R37 CH 67 CH 267 E67 R67 CC 28 CC 228 S28 CH 38 CH 238 E38 R38 CH 68 CH 268 E68 R68 CC 29 CC 229 S29 CH 39 239 E39 R39 CH 69 269 E69 R69 CC 30 CC 230 S30 CH Channel CH Channel CC Frequency MHz cc Frequency MHz CH 102 F2 CH 141 F41 CC 110 116 124 CC 152 391 399 CH 103 F3 CH 142 F42 CC 111 124 132 CC 153 399 407 CH 104 F4 CH 143 F43 CC 112 132 140 CC 154 407 415 CH 105 F5 CH 144 F44 CC 113 140 148 CC 155 415 423 CH 106 F6 CH 145 F45 CC 114 148 156 CC 156 423 431 CH 107 F7 CH 146 F46 CC 115 156 164 CC 157 431 439 CH 108 F8 CH 147 F47 CC 116 164 172 CC 158 439 447 CH 109 F9 CH 148 F48 CC 123 220 228 CC 159 447 455 CH 110 F10 CH 149 F49 CC 124 228 236 CC 160 455 463 CH 121 F21 CH 150 F50 CC 1
12. F T L MENU When set to 2 pictures multi the main picture sound from the TV speaker can be changed to the sub picture sound by pressing the button The speaker mark moves from the main picture to the sub picture The sound changes to the main picture sound if the button is pressed again When the headphones are connected you can listen to the sound from the side at which the speaker mark is displayed No sound comes from the TV speaker A picture of EXT 4 cannot be displayed as the sub picture The MULTI PICTURE function does not work for a PC signal You cannot view a scrambled channel in the sub picture When set to 12 pictures multi press the buttons to choose the screen you want to view and the press the OK button to display that picture on the whole screen The BLUE BACK function does not work when the MULTI PICTURE function is being used The ZOOM function does not work when the MULTI PICTURE function is being used To return the multi picture to one screen Press the 2 button press the lt P gt buttons to choose one screen and then press the OK button Pressing the button will also return the display to one screen Remote control buttons and functions 21 Remote control buttons and functions Favourite channel function You can register your favourite TV channels in the number buttons to 4 After registering the channel can be called by
13. GE 1 Amplifier Front speakers Magnetic shielded type Subwoofer The output from AUDIO OUT terminal is not interrupted by headphone connection to the TV You cannot cut the sound from the front speaker even if you connect a headphone to the TV Adjust the volume of the external speakers with the amplifier Connect the subwoofer which carried an amplifier The subwoofer is interlocked with the TV volume You cannot connect an amplifier and subwoofer at the same time Using the TV speaker as the surround centre speaker The TV speaker can be used as the centre speaker when listening to Dolby Surround sound Connect the AV amp centre speaker output terminal and the TV CENTRE CH input terminal Back of the TV CENTRE CH Amplifier Front speakers Magnetic shielded type When using the TV speaker as the surround centre speaker set the SOUND menu SPEAKER setting to CENTRE Additional preparation 49 90 CH CC numbers When you want to use the INSERT function on page 41 find the CH CC number corresponding to the Channel number of the TV channel from this table CH Channel CH Channel cc Channel cc Channel CH 02 CH 202 E2 R1 CH 40 CH 240 E40 CC 01 CC 201 51 CC 31 CC 231 S31 CH 03 CH 203 E3 ITALY A CH 41 CH 241 E41 R41 CC 02 CC 2
14. Have you chosen a TV channel with very poor reception If so the BLUE BACK function will be activated the entire screen becomes blue and the sound 1s muted If you still want to view the TV channel follow the description BLUE BACK on page 36 to change the BLUE BACK function setting to OFF Ifthe SYSTEM setting for TV channel is incorrect it may prevent the sound from being issued Follow the description EDIT MANUAL on page 38 to use the MANUAL function to try to change the SYSTEM setting Poor picture e If noise snow totally blocks out the picture there may be a problem with the aerial or aerial cable Check the following to try to solve the problem 52 Have the TV and aerial been connected properly Has the aerial cable been damaged Is the aerial pointing in the right direction Is the aerial itself faulty If the TV or aerial suffers interference from other equipment stripes or noise may appear in the picture Move any equipment such as an amplifier personal computer or a hair drier that can cause interference away from your TV Or try moving the TV If the aerial suffers interference from a radio tower or high voltage wire please contact your local dealer Ifthe TV suffers interference from signals reflecting from mountains or buildings double pictures ghosting will occur Try to change the aerial s direction or replace it with one with better directionality Are
15. The button on the TV does not fully isolate the TV from the AC supply If you are not going to use the TV fora long period be sure to disconnect the AC plug from the AC socket Choose a TV channel Press the P V A buttons to choose a programme number PR or an EXT terminal Press the TV AV button to change between TV and external input Adjust the volume Press the 22 Volume buttons The volume level indicator appears Using the Menu Use the MENU OK button Refer to Using the TV s menu see page 27 for details of using the menu Remote control buttons and functions 1 button 2 Number buttons 3 Information button 4 ZOOM button 5 amp button 6 TV button 7 lt P V A buttons 2 Text button 9 P V A buttons VCR DVD Teletext control buttons 17 V A buttons 02 Favourite button 13 Standby button VCR TV DVD switch 15 AV button Colour buttons Multi button G Freeze Select button MENU button 20 OK button 21 BACK button 22 221 Volume buttons Turn the TV on or off from standby mode Press the standby button to turn the TV on or off When the TV is turned on the power lamp lights blue The power can be turned on by pressing the TV button P V A buttons or Number buttons To turn the TV on or off set the VCR TV DVD switch on the remote control to the TV position and press the I button If the
16. HUE COLOUR TEMP FEATURES RESET 6000 D0014 EN While the PICTURE menu is displayed pressing the blue button will set the CONTRAST BRIGHT SHARP COLOUR HUE settings to their default settings e When watching the picture from EXT 1 to 5 or the PC picture effect settings can be memorised for each external input by setting the picture effects in the PICTURE menu The following items in the PICTURE menu are memorised PICTURE MODE CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP DIGITAL VNR COLOUR SYSTEM The last setting made for each item 15 memorised PICTURE MODE You can choose one of three PICTURE to adjust the picture settings automatically BRIGHT Heightens contrast and sharpness STANDARD Standardizes picture adjustment SOFT Softens contrast and sharpness CONTRAST You can adjust the picture contrast 4 lower gt higher BRIGHT You can adjust the picture brightness 4 darker gt brighter SHARP You can adjust the picture sharpness 4 softer gt sharper COLOUR You can adjust the picture colour lt lighter gt deeper HUE You can adjust the picture tint lt reddish gt greenish You can change the HUE setting picture hue when the colour system is NTSC 3 58 or NTSC 4 43 COLOUR TEMP You can select one of three COLOUR TEMP modes three tones of white to adjust the white balance of the picture
17. VCR TV DVD switch on the remote control is set to a position other than TV the TV will not be turned on or off even if the button is pressed 15 16 Remote control buttons and functions Choose a TV channel and watch images from external devices E Use the number buttons Enter the programme number PR of the channel using the number buttons Example e PR 6 press e PR 12 press 2 Use the P V A buttons Press the V A buttons to choose the programme number PR you want or an EXT terminal E Use the AV button Press the AV button to choose an EXT terminal TV mode EXT modes Programme numbers PR 1 PR 99 You can choose a video input signal from the S VIDEO signal Y C signal and regular video signal composite signal For details see S IN S VIDEO input on page 43 e If you do not have a clear picture or no colour appears change the colour system manually See COLOUR SYSTEM on page 32 If you choose an EXT terminal with no input signal the EXT terminal number becomes fixed on the screen This TV set has a function which can automatically change over the input according to a special signal output from an external device The EXT 4 and EXT 5 terminals do not support this function Since this TV is designed to make full use of the resolution of the original video source the motion may appear unnatural when the video source is inp
18. a Decoder repeat steps 2 to 6 If the DECODER EXT 2 function has been set to ON but the TV channel cannot be unscrambled check the following Has the decoder been connected to the VCR properly according to the VCR and decoder instruction manuals Has the decoder power been turned on Can the TV channel be unscrambled with a decoder Do you need to change the VCR settings in order to connect the decoder Confirm that the VCR 15 set properly by rechecking the VCR instruction manual SET UP menu EXT SETTING 1 Choose EXT SETTING then press the OK or gt button The EXT SETTING menu appears Gh gt ext SETTING EXT 1 z ING EXT 3 EXT 5 EXT 4 ID LIST an D0020 EN 2 Follow the instructions for the function you want to use and operate the function S IN You can enjoy the high quality picture of the 2 S VIDEO signal Y C signal ID LIST You can have a name for each of the devices connected for each EXT terminal DUBBING You can choose a signal source to be output from an EXT 2 terminal S IN S VIDEO input You can connect a device such as an S VHS VCR to enjoy the high quality picture of the S VIDEO signal Y C signal Preparation First read the device s instruction manual and Additional preparation on page 47 to connect the device to the TV properly Second follow the device s instruction manual to
19. button to go into the List mode The page numbers you have stored are displayed at the bottom of the screen 2 Press a colour button to choose a position Then press the number buttons to enter the page number zoom 3 maa 1 2 3 OO 09915 gt 666 D 3 Press and hold down the gt Store button The four page numbers blink white to show that they are stored in memory To call up a stored page 1 Press the F T L button to enter the List mode 2 Press acolour button having a stored page zoom O To exit the List mode Press the F T L button again Hold You can hold a teletext page on the screen for as long as you want even while several other teletext pages are being received Press the 2 Hold button Hold indication 102 103 To cancel the Hold function Press Hold button again Teletext function Sub page Some teletext pages include sub pages that are automatically displayed 1 Choose a teletext page that includes sub pages Sub page numbers that can be viewed are automatically displayed at the top of the screen 2 Press the lt gt buttons to choose sub page number Reveal Some teletext pages include hidden text such as answers to a quiz You can display the hidden text Each time you press the 2 Reveal button text is hidden or revealed 1 2 1 2 3 X 3 X 3 6 lt gt 100 101 102 103 100 101
20. function Depending on your cable TV station there may be a broadcast selection menu set up by the cable TV station Follow the menu instructions and use the lt P gt and V A buttons to operate the menu After you have made the setting press the OK button e If you have any questions about the items in the Broadcast Selection menu or how to operate the menu please contact your cable TV station e If you don t want to use the ACI function press the W A buttons to choose ACI SKIP and then press OK When the cable TV broadcast reception 15 poor the ACI function will not work properly If there is an error in the ACI data itself the TV channel cannot be registered properly If this happens turn the ACI function off ACI SKIP and use the AUTO PROGRAM function Alternatively use the EDIT MANUAL function to correct the Programme number PR setting If ACI ERROR is displayed in the AUTO PROGRAM menu ERROR means that the ACI function is not working properly Press the button to start the ACI function again If ACI ERROR still appears even after you have tried to start the ACI function several times press the button to start the AUTO PROGRAM function It does not cause any problem because all the TV channels are registered to the Programme numbers PR by the AUTO PROGRAM function Downloading the data to VCR You can transmit to the latest Programme numbers PR data to a VCR w
21. pressing the QJ favourite button and a number button to 4 Favourite channel registration 1 In the normal screen choose a TV channel PR 1 PR 99 that you want to register For details refer to Choose a TV channel and watch images from external devices on page 16 2 Press and hold the QA favourite button for three seconds or more Then SET 1 4 appears on the screen 3 Press one of the number buttons 1 to 4 The current channel is registered in the pressed number button After PROGRAMMED appears on the screen the favourite channel icon appears at the top right of the screen Ifthe channel you are trying to register is already registered in one of the other number buttons 1 to 4 NOT AVAILABLE appears on the screen Channels cannot be registered while the multi screen teletext screen menu bar or menu screen are being displayed or while the freeze function is being used Channels locked with the CHILD LOCK function cannot be registered e If AUTO PROGRAM 1s performed the registered favourite channels are reset 22 Recalling the favourite channel A channel can be called by pressing the favourite button and then pressing a number button 1 to 4 The called favourite channel appears on the screen Channels cannot be registered while the multi screen teletext screen menu bar or menu screen are being displayed or while the freeze function is bein
22. 02 52 CC 32 CC 232 32 CH 04 CH 204 E4 ITALY B R2 CH 42 CH 242 E42 R42 CC 03 CC 203 S3 CC 33 CC 233 533 05 205 E5 ITALY D R6 CH 43 CH 243 E43 R43 CC 04 204 54 CC 34 234 534 CH 06 CH 206 E6 ITALY E R7 44 CH 244 E44 R44 CC 05 CC 205 S5 CC 35 CC 235 S35 CH 07 CH 207 E7 ITALY F R8 45 CH 245 E45 R45 CC 06 CC 206 56 CC 36 CC 236 S36 CH 08 CH 208 E8 R9 CH 46 CH 246 E46 R46 CC 07 CC 207 S7 CC 37 CC 237 S37 CH 09 CH 209 E9 ITALY G CH 47 CH 247 E47 R47 CC 08 CC 208 58 CC 38 CC 238 38 CH 10 CH 210 E10 ITALY H R10 CH 48 CH 248 E48 R48 CC 09 CC 209 59 CC 39 CC 239 539 CH 11 211 E11 ITALY H 1 R11 CH 49 CH 249 E49 R49 CC 10 CC 210 S10 CC 40 CC 240 S40 12 CH 212 E12 ITALY 2 12 CH50 CH250 E50 R50 11 CC 211 S11 CC 41 CC 241 S41 CH 21 CH 221 E21 R21 CH 51 CH 251 E51 R51 12 CC 212 512 75 CC 275 X CH 22 CH 222 E22 R22 52 252 E52 R52 CC 13 CC 213 513 CC 76 CC 276 23 223 E23 R23 CH 53 CH 253 E53 R53 14 CC 214 514 CC 77 CC 277 Z ITALY R4 24 CH 224 E24 R24 CH 54 CH 254 E54 R54 CC 15 CC 215 S15 CC 78 CC 278 Z 1 R5 25 CH 225 E25 R25 55 255 E55 R55 CC 16 CC 216 S16 CC 79 CC 279 2 2 CH 26 CH 226 E26 R26 CH 56 CH 256 E56 R56 CC 17 CC 217 S17 27 CH 227 E27 R27 57 257
23. 25 236 244 CC 161 463 469 CH 122 F22 CH 151 F51 CC 126 244 252 CH 123 F23 CH 152 F52 CC 127 252 260 CH 124 F24 CH 153 F53 CC 128 260 268 CH 125 F25 CH 154 F54 CC 129 268 276 CH 126 F26 CH 155 F55 CC 130 276 284 CH 127 F27 CH 156 F56 CC 131 284 292 CH 128 F28 CH 157 F57 CC 132 292 300 CH 129 F29 CH 158 F58 CC 133 300 306 CH 130 F30 CH 159 F59 CC 141 306 311 CH 131 F31 CH 160 F60 CC 142 311 319 CH 132 F32 CH 161 F61 CC 143 319 327 CH 133 F33 CH 162 F62 CC 144 327 335 CH 134 F34 CH 163 F63 CC 145 335 343 CH 135 F35 CH 164 F64 CC 146 343 351 CH 136 F36 CH 165 F65 CC 147 351 359 CH 137 F37 CH 166 F66 CC 148 359 367 CH 138 F38 CH 167 F67 CC 149 367 375 CH 139 F39 CH 168 F68 CC 150 375 383 CH 140 F40 CH 169 F69 CC 151 383 391 CH CC numbers When two CH CC numbers correspond to one Channel number choose either one according to the current COUNTRY setting When the COUNTRY setting 15 other than FRANCE choose a two digit CH CC number When the COUNTRY setting is FRANCE choose a three digit CH CC number Find the CH CC number CC110 to CC161 corresponding to the TV channel SECAM L system from a French cable TV station based on the broadcast frequency of the TV channel When you do not know the broadcast frequency please contact the cable TV station The CH CC numbers of CH102 CH169 and CC110 CC161 correspond to the TV channels being broadcast by SECAM L system The ot
24. AM system NTSC 3 58 NTSC 3 58 MHz system NTSC 4 43 NTSC 4 43 MHz system AUTO This function detects a colour system from the input signal You can only use this when you are viewing a picture from programme number PR 0 AV or an EXT terminal The AUTO function may not function properly if you have poor signal quality If the picture is abnormal in the AUTO function choose another colour system manually When in the Programme numbers PR 0 AV to PR 99 you cannot choose NTSC 3 58 or NTSC 4 43 SECAM cannot be chosen when the COUNTRY setting is UNITED KINGDOM COLOUR SYSTEM cannot be chosen when you are watching the EXT 4 picture or PC picture 4 3 AUTO ASPECT You can choose one of three ZOOM modes REGULAR PANORAMIC or 14 9 ZOOM as the ZOOM mode for the normal picture 4 3 aspect ratio 1 Choose 4 3 AUTO ASPECT then press the OK button gt gt 4 3 AUTO ASPECT PANORAMIC REGULAR 14 9 ZOOM D0017 EN 2 Press the W A buttons to choose a ZOOM mode SOUND menu I souno STEREO I I BASS TREBLE BALANCE 3D SOUND A H B BBE SPEAKER O D0019 EN e When the headphones are connected only STEREO 1 and SPEAKER can be used e When the SPEAKER setting see page 34 is CENTRE BALANCE and 3D SOUND cannot be chosen from the SOUND menu STEREO 1 When you are viewing bilingual broadcast programme yo
25. DEO connector x 1 e Video input S VIDEO Y C input and Audio L R inputs are available AUDIO OUT terminal RCA connectors x 3 Audio L R outputs and SUBWOOFER output are available Output level 0 5 Vrms AUDIO IN terminal RCA connector x 1 CENTRE CH input is available PC INPUT terminal Analog RGB D SUB 15 pin x 1 PC signal is available Refer to page 46 for details of the signals which can be input Headphone jack Stereo mini jack 3 5 mm in diameter Dimensions W x x D 907 mm x 634 mm x 117 mm TV only Weight 30 4 kg TV only Accessories Refer to Checking the contents of packages on page 5 We may change the design and specifications without notice Pictures displayed on the screen using this TV s ZOOM functions should not be shown for any commercial or demonstration purpose in public places cafes hotels etc without the consent of the owners of copyright of the original picture sources as this would be an infringement of copyright VICTOR COMPANY OF JAPAN LIMITED VICTOR COMPANY OF JAPAN LIMITED LCT1653 001A U 2004 VICTOR COMPANY OF JAPAN LIMITED 0304 T CR JMUK
26. EXT 2 EXT 1 9 GOOD You can watch a video using VCR without doing For details see your VCR instruction manual To connect more equipment please see Connecting external equipment on page 47 connect additional audio equipment see Connecting speakers amplifier on page 48 e If you connect a decoder to a T V LINK compatible VCR set the DECODER EXT 2 function to ON For details see DECODER EXT 2 on page 42 Otherwise you will not be able to watch scrambled channels lt N To Aerial Output AV IN OUT Terminal Setting up your TV E Rear Panel Connecting the power cord to the AC outlet Attaching the ferrite cores Using the power cord without ferrite core may lead to noise interference Attach the ferrite core to the AC plug end of the power cord for the TV Ferrite core Power cord Insert the AC plug on the power cord from the TV into AC outlet Caution Operate only from the power source specified AC 110 240 V 50 Hz on the unit Failure to use the supplied power cord or to insert it into a correctly earthed outlet may result in electric shocks Insert the AC plug into a correctly earthed outlet Back of the TV Power cord 1 Aerial socket page 7 2 EXT 1 terminal pages 7 43 47 3 EXT 2 terminal pages 7 12 43 47 4 EXT 3 terminal pages 43 47 5 EXT 4 te
27. My Digital Image Scaling Technology InteriArt PD 35S50J TU LINI plain English approved by the word centre E Warning DO NOT cut off the mains plug from this equipment If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point then obtain an appropriate safety approved extension lead or adaptor or consult your dealer If nonetheless the mains plug is cut off remove the fuse and dispose of the plug immediately to avoid a possible shock hazard by inadvertent connection to the mains supply If a new mains plug has to be fitted then follow the instruction given below Important Do not make any connection to the larger terminal which is marked with the letter E or by the safety earth symbol or coloured green or green and yellow The wires in the mains lead on this product are coloured in accordance with the following code Blue Neutral Brown Live Guidelines for safe operation As these colours may not correspond with the coloured marking identifying the terminals in your plug proceed as follows The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red When replacing the fuse use only a correctly rated approved type and always re fit the fuse cover If in dou
28. OFF CHILD LOCK When there is a TV channel you do not want your children to watch you can use the CHILD LOCK function to lock out the TV channel Even when a child chooses a programme number PR for a locked TV channel the screen will change to blue and display CHILD LOCK so the TV channel cannot be viewed Unless you enter a pre set ID number by a special operation the lock cannot be released and the child cannot view the TV channel set the CHILD LOCK function 1 Choose CHILD LOCK then press the button SET ID NO ID number setting screen appears m gt gt SETIDNO O 0040 D0025 EN 2 Set the ID number to your liking 1 Press the W A buttons to choose a number 2 Press the lt gt buttons to move the cursor 3 Press the OK button The Sub menu of CHILD LOCK appears TQ gt CHILD LOCK D0026 EN 36 FEATURES menu 4 Press the W A buttons to choose a TV channel Every time you press the W A buttons the Programme number PR changes and the picture of the TV channel registered in the Programme number PR is displayed on the screen Press the blue button and set the CHILD LOCK function Then press the OK button CHILD LOCK appears and the TV channel is locked To reset the CHILD LOCK function Press the blue button again CHILD LOCK disappears To disable easy resetting of the CHILD LOCK function the menu disappears if you choose t
29. SC 3 58 4 43 MHz system Channels and frequencies 21 69 IR A J E2 E12 E21 E69 51 541 X Y Z Z 1 Z 2 Sound multiplex systems NICAM 1 system NICAM B G I D K L system A2 B G D K system Teletext systems FLOF Fastext FLOF Fastext TOP WST World Standard System WST World Standard System Power requirements 110 240 V AC 50 Hz Power consumption 244 W Standby 3 0 W Screen size Viewable area 91 cm measured diagonally Audio output Rated Power output 10 W 10 W Speakers 6 6 cm round x 4 EXT 1 terminal Euroconnector 21 pin SCART e Video input S VIDEO Y C input Audio L R inputs and RGB inputs are available TV broadcast outputs Video and Audio L R are available EXT 2 terminal Euroconnector 21 pin SCART e Video input S VIDEO Y C input Audio L R inputs and RGB inputs are available Video and Audio L R outputs are available T V LINK functions are available EXT 3 terminal Euroconnector 21 pin SCART e Video input and Audio L R inputs are available EXT 4 terminal RCA connectors x 5 e Video input Component video Y Pb Pr input and Audio L R inputs are available 625p 525p 1125i and 750p signals are available 750p signal is only available for 60 2 e Some DVD players can output 625p 525p and 750p signals 1125i and 750p are new high definition signals However 1125i and 750p broadcasts are currently not available in Europe EXT 5 terminal RCA connectors x 3 S VI
30. SUBTITLE This zooms up the wide picture 16 9 aspect ratio with subtitles to the full screen COLO FULL This uniformly stretches the left and right sides of a normal picture 4 3 aspect ratio to fill the wide TV screen O For 16 9 aspect ratio pictures that have been squeezed into a normal picture 4 3 aspect ratio use the FULL mode to restore the picture to its original shape Choose the ZOOM mode 1 Press the ZOOM button to display the ZOOM menu AUTO REGULAR PANORAMIC 14 9 ZOOM 16 9 ZOOM 16 9 ZOOM SUBTITLE LL DO009 EN 2 Press the V A buttons to choose a ZOOM mode Then press the OK button The picture expands and the chosen ZOOM mode 15 displayed in about 5 seconds The ZOOM mode may be automatically changed by the control signal from an external device When you want to return to the previous ZOOM mode choose the ZOOM mode again Remote control buttons and functions Adjusting the visible area of the picture If subtitles or the top or bottom of the picture are cut off you can adjust the visible area of the picture manually 1 Press the ZOOM button The ZOOM menu appears 2 Press the OK button to display the ZOOM mode indicator The indicator appears 16 9 ZOOM D0010 EN 3 While it is displayed press the V A buttons to change the position of the picture You cannot adjust the visible area in REGULAR or FULL mode
31. Since white is the colour which 15 used as a reference for all the other colours changing the COLOUR TEMP mode affects the appearance of all the other colours on the screen COOL A bluish white Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture NORMAL The normal white colour 29 30 PICTURE menu WARM A reddish white Using this mode when watching films allows you to enjoy colours that are characteristic of films FEATURES Choose FEATURES and press OK or gt button to display the sub menu lt _AUTO LOW DIGITAL VNR k Super DigiPure MOVIE THEATRE COLOUR MANAGEMENT PICTURE MANAGEMENT COLOUR SYSTEM 4 3 AUTO ASPECT D1015 EN DIGITAL VNR The DIGITAL VNR function cuts down the amount of noise snow or interference in the original picture You can choose from the three DIGITAL VNR function settings of AUTO MIN and MAX AUTO LOW AUTO HIGH The TV will automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture giving you the best possible picture e If you set the DIGITAL VNR effect too high it can make the picture less sharp It is recommended you use the AUTO LOW setting if you can If you set the DIGITAL VNR function to AUTO LOW but still notice some noise change the setting from AUTO LOW to AUTO HIGH MIN The level of the DIGITAL VNR effect is set to the min
32. ailable cord to fix the TV to rigid components such as walls and columns Supplied hooks CAUTION e Operate from the power source specified AC 110 240 50 Hz on the unit Avoid damaging the AC plug and power cord When you are not using this unit for a long period of time it is recommended that you disconnect the power cord from the main outlet Distance recommendations Avoid improper installation and never position the unit where good ventilation is impossible mm 150mm When installing this TV distance recommendations must be maintained between the set and the wall as well as inside a tightly enclosed area or piece of furniture Keep to the minimum distance guidelines shown for safe operation Burn in A characteristic of Plasma Display Panels PDPs is that displaying the same image for a long time causes a part of the image to stay on the screen this is called phosphor burn in Avoid burn in as follows Use the PICTURE SHIFT function To prevent burn in the picture displayed on the screen is shifted up down and to the left and right at regular intervals See page 45 for details Even if the PICTURE SHIFT function is turned off the picture may shift to the left or right when the channel or input is changed The PICTURE MODE function is initially set to BRIGHT Unless the TV is being watched in an extremely bright room we recommend you
33. an set it using the MANUAL function For details see EDIT MANUAL on page 38 Setting up your TV The AUTO PROGRAM function does not set the programme number PR 0 AV for your video cassette recorder You will need to set this using the MANUAL function In some areas you may get TV reception from more than one transmitter for example different ITV regions In this case each TV channel could be set twice If this happens the first set of channels will have the stronger signal If you want to delete the second set of channels you will have to do it manually see page 38 For users in the UK If you have any problems setting up your new TV please call the JVC Helpline on 0870 330 5000 For users in the Republic of Ireland If you have any problems setting up your new TV please call the JVC Helpline on 1890 582500 ACI function This TV has an ACI function which decodes the ACI Automatic Channel Installation data Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly according to the data from the cable TV station If ACI START ACI SKIP appears the AUTO PROGRAM menu You can use the ACI Automatic Channel Installation function to decode the ACI data and complete the registration of all the TV channels in a short period of time Press the W A buttons to choose ACI START Then press the OK button to start the ACI
34. assembled and installed by qualified service personnel Please read the instruction manual for the wall mounting unit before starting installation in order to prevent accidents We are not liable for any damage caused by faulty assembly faulty wall mounting insecure wall mounting misuse alterations or natural disasters Cautions for installation Do not tilt the TV towards the left or right or towards the back Install the TV in a corner on wall or on the floor so as to keep cords out of the way The TV will generate a slight amount of heat during operation Ensure that sufficient space 15 available around the TV to allow satisfactory cooling See Distance recommendations on page 1 Setting up your TV Caution Turn off all the equipment including the TV before connecting anything Connecting the aerial and video cassette recorder VCR The connecting cables are not provided For further details refer to the manuals provided with the devices to be connected If you are connecting a VCR follow 8 in the diagram opposite Aerial Back of the TV If you are not connecting a VCR follow To use the T V LINK functions you must have a T V LINK compatible VCR connected by a SCART cable to the EXT 2 terminal on the TV For details about T V LINK functions see T V LINK functions on page 12 75 ohm Coaxial Cable
35. bt consult a competent electrician How to replace the fuse Open the fuse compartment with a P blade screwdriver and pees replace the fuse This equipment has been designed and manufactured to comply with international safety standards However as with any electrical appliance care must be taken to ensure optimal results and operational safety Before attempting to use this equipment read the operating instructions thoroughly Ensure that all electrical connections including the mains plug extension leads etc have been made in accordance with the manufacturer s instructions e If ever in doubt about the installation operation or safety of this equipment consult your dealer e Handle all glass panels or covers with care Never operate this equipment if it appears damaged or operates abnormally Turn the power off disconnect the main power plug and consult your dealer Never remove any affixed panels or covers Doing so may result in electrical shock Never leave this equipment operating unattended unless otherwise specifically stated that it is designed to do so or in standby mode Only use the designated power switch to turn off the power and ensure that all potential users are instructed how to do so Make special arrangements for infirm or handicapped persons e Never watch TV while operating a motor vehicle It is illegal to watch TV while driving Never listen to headphones at high vo
36. change the PICTURE MODE setting to either STANDARD or SOFT Doing so will reduce the chance of burn in and extend the life of the PDP See PICTURE MODE on page 29 E Do not display static images or characters for long periods of time While an image is displayed With power OFF Burn in example Reduce CONTRAST and BRIGHT on the PICTURE menu page 29 when viewing E Do not view for long periods of time in the REGULAR mode page 18 Screen size is normally chosen to ensure that the picture is displayed on the entire screen After viewing in the REGULAR mode in which black bands may occur at the left and right of the screen it is recommended to change to the PANORAMIC mode to display the picture on the entire screen While an image is displayed With power OFF Burn in example E Do not view for long periods of time using the MULTI PICTURE function page 20 If Burn in has occurred If burn in occurs try the REFRESH function page 37 If burn in is minimal it may gradually become less noticeable Note Once burn in occurs it will never disappear completely Pixel defects PDPs use collections of fine dots pixels to display images While there is no problem with more than 99 99 of these pixels please understand that a very small number of pixels may not light or may light all the time Do not install the TV near electronic equipment that is susceptible to electromagnetic waves It may cause interfe
37. channel number is displayed from the three types TYPE A TYPE B and BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent or when there is no input from an external device ON This function is turned on OFF This function is turned off FEATURES menu REFRESH When burn in is minimal burn in and residual images may be softened with the REFRESH function 1 2 Choose REFRESH Press the OK button Snow appears on the screen Leave the TV in this condition for a few hours After a few hours press the TV number buttons button Press the button for the TV The REFRESH function has no effect if used only for a short time FAVOURITE SETTING Chose when deleting the favourite channels registered in the buttons to 4 1 Choose FAVOURITE SETTING then press the OK or gt button The FAVOURITE SETTING menu appears BL FAVOURITE SETTING D0112 EN Press the V A buttons and chose the favourite channel that you want to delete Press the blue button The chosen favourite channel and set contents are deleted 37 38 SET UP menu AUTO PROGRAM B EDIT MANUAL D0029 EN AUTO PROGRAM You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the Initial settings page 9 To receive SKY 1 you need a satellite tuner Yo
38. ecording images from an external device connected to the TV for example a camcorder when recording a TV channel after it has been unscrambled on a decoder when recording a TV channel by using the TV s output because the VCR s own tuner cannot properly receive that channel When the VCR is not ready for example when there is no tape inserted NO RECORDING is displayed You cannot carry out Direct Rec using your TV s control Generally the VCR cannot record a TV channel that it cannot receive properly on its own tuner even if you can view that TV channel on the TV However some VCRs can record a TV channel by using the TV s output if that channel can be viewed on the TV For details see your VCR instruction manual Setting up your TV 13 TV buttons and functions See the pages in brackets for details 00 power button 2 1 Volume buttons page 14 3 P V A buttons page 14 4 MENU OK button pages 43 47 5 Power lamp pages 9 14 6 TV AV button pages 43 47 7 EXT 5 terminal pages 43 47 PC IN D SUB terminal pages 43 47 9 Headphone jack mini jack page 47 Remote control sensor Turn the TV on from standby mode Press the button or the P V A buttons to turn the TV on from standby mode When the TV is turned on the power lamp lights blue To turn the TV off Press the button again The power lamp goes off Caution
39. fect as the original remote control 1 Set the VCR TV DVD Switch to the VCR or DVD position VCR When you are operating the VCR set the switch to the VCR position e You can turn the VCR on or off with the 0 1 standby button DVD When you are operating the DVD player set the switch to the DVD position e You can turn DVD player on or off with the standby button You can also press the MENU TOP MENU button and display the DVD disc menu screen and then operate by pressing the lt P VW A buttons Remote control buttons and functions 2 Press the VCR DVD Control Button to control your VCR or DVD player If your device 15 not made by JVC these buttons will not work Even if your device is made by JVC some of these buttons may not work depending on the device you are using e You can use the V A buttons to choose a TV channel the VCR will receive or choose the chapter the DVD player plays back Some models of DVD player use the V A buttons for both operating the fast forward backward functions and for choosing the chapter In this case the 4 4 gt gt buttons do not work You cannot turn the TV on or off when the VCR TV DVD switch 15 set to the VCR DVD position When you turn the TV on or off set the VCR TV DVD switch to the TV position 23 Teletext function VCR TV 8 DVD Basic operation You can view three types of teletext broadcasts on t
40. g used Ifanumber button in which no channel is registered is pressed NO MEMORY appears on the screen Picture effects can set for each favourite channel registered in the buttons 1 to 4 For details refer to the next section Setting the picture effect Setting the picture effect When a favourite channel has been chosen with the QA favourite button and number buttons 1 to 4 picture effect settings can be memorised for each favourite channel by setting the picture effects in the PICTURE menu see page 29 The following items in the PICTURE menu see page 29 are memorised PICTURE MODE CONTRAST BRIGHT SHARP COLOUR HUE COLOUR TEMP DIGITAL VNR COLOUR SYSTEM The last setting made for each item 15 memorised If you choose the favourite channel normally without using the favourite channel function the normal picture effect 1s used Showing the favourite channels Press the information button to display the PR LIST You can see the favourite channel that has the registered number button icon at the right of the channel number When you want to delete a favourite channel delete the set channel and set contents with FAVOURITE SETTING see page 37 in the FEATURES menu Operating a JVC brand VCR or DVD player These buttons will operate a JVC brand VCR or DVD player Pressing a button that looks the same as the device s original remote control button has the same ef
41. h the NTSC colour system PICTURE menu E COLOUR MANAGEMENT This TV supports the COLOUR MANAGEMENT function to ensure dull colours are compensated to produce natural hues The COLOUR MANAGEMENT function is on by default ON COLOUR MANAGEMENT function is turned on OFF COLOUR MANAGEMENT function is turned off Set this function to ON under normal conditions PICTURE MANAGEMENT The PICTURE MANAGEMENT function makes it easier to see the dark areas when a picture has many dark areas and makes it easier to see the bright areas when a picture has many bright areas When the PICTURE MANAGEMENT function is turned on the optimum picture settings are automatically set for each picture Normally use with this function on 31 32 PICTURE menu COLOUR SYSTEM The colour system is chosen automatically However if the picture is not clear or no colour appears choose the colour system manually 1 Choose COLOUR SYSTEM Then press the OK or button The sub menu of the COLOUR SYSTEM function appears gt gt COLOUR SYSTEM D0016 EN 2 Press the lt gt buttons to choose MAIN or SUB MAIN You can change the colour system of the main picture SUB You can change the colour system of the sub picture Choose MAIN when a sub picture is not displayed 3 Press the V A buttons to choose the appropriate colour system Then press the OK button PAL PAL system SECAM SEC
42. he CHILD LOCK function and press the OK button To view a locked TV channel 1 Choose a programme number PR of a locked TV channel with the number buttons or PR LIST The screen changes to blue and the CHILD LOCK appears You cannot view the TV channel ats ____ D0027 EN Press the Information button to display ID NO ID No input screen GORE D0028 EN Press the number buttons to enter the ID number The lock is temporarily released so you can view the TV channel If you have forgotten the ID number Perform step of To set the CHILD LOCK function After confirming the ID number press the button to exit the menu Even if you reset the lock temporarily it does not mean that the CHILD LOCK function set for the TV channel is cancelled The next time anyone tries to view the TV channel it will be locked again When you want to cancel the CHILD LOCK function you must perform the operation To set the CHILD LOCK function again To stop it being easy to choose the programme number PR of a locked TV channel the programme number PR has been set so that it cannot be chosen with the W A buttons or the buttons of the TV To stop it being easy to reset the lock ID NO ID No input screen is set so that it cannot appear unless you press the G Information button APPEARANCE Press the lt P button and choose the format in which the
43. he TV FLOF Fastext TOP and WST TOP is not available when the COUNTRY setting is UNITED KINGDOM 1 Choose a TV channel with a teletext broadcast 2 Set the VCR TV DVD switch to the TV position ZTN vp 3 Press 2 Text button to display the teletext Pressing 2 Text button changes the mode as follows Bas Text mode 24 4 Choose a teletext page by pressing the P V A buttons number buttons or colour buttons To return to the TV mode Press the TV button or 2 Text button If you have trouble receiving teletext broadcasts consult your local dealer or the teletext station The ZOOM function will not work in the TV and text mode or Text mode You cannot operate menus when viewing a teletext programme Language display depends on the country which was set on the COUNTRY menu If characters on a Teletext programme do not appear properly change the COUNTRY setting to other country s To change the COUNTRY setting perform steps 1 and 2 of the AUTO PROGRAM procedure on page 38 and then press the OK button When viewing a teletext programme the text periodically moves a little at a time towards either the top or bottom of the screen This is to prevent burn in and is not a malfunction Using the List Mode You can store the numbers of your favourite teletext pages in memory and call them up quickly using the colour buttons To store the page numbers 1 Press F T L
44. her CH CC numbers correspond to the TV channels being broadcast by a method other than a SECAM L system 51 Troubleshooting If a problem arises while you are using the TV please read this troubleshooting guide carefully before you ask to have the TV repaired You may be able to fix it easily by yourself For example if the mains plug is disconnected from the mains outlet or the TV aerial has problems you may think there is a problem with the TV itself Important This troubleshooting guide only covers problems whose causes are not easy to decide If you have a question when you are operating a function read the page s for that function carefully not this troubleshooting guide If you follow the advice in this troubleshooting guide without any success unplug the mains plug and ask for your TV to be repaired Do not attempt to repair the TV by yourself or to remove the rear cover of the TV If you cannot turn on the TV Is the mains plug connected to the mains outlet Is the power lamp lit If not press the main power button Make sure you set the VCR TV DVD switch to the TV position You cannot turn the TV on when the VCR TV DVD switch is set to the VCR or DVD position If you cannot turn off the TV Make sure you set the VCR TV DVD switch to the TV position You cannot turn the TV off when the VCR TV DVD switch is set to the VCR or DVD position No picture no sound
45. icture aspect ratio Choose the optimum one from the following ZOOM modes e The ZOOM mode is fixed at FULL when you are using the TV as a PC screen AUTO When a WSS Wide Screen Signalling signal which shows the aspect ratio of the picture is included in the broadcast signal or the signal from an external device the TV automatically changes the ZOOM mode to 16 9 ZOOM mode or FULL mode according to the WSS signal Ifa WSS signal is not included the picture is displayed according to the ZOOM mode set with the 4 3 AUTO ASPECT function For details of the 4 3 AUTO ASPECT function see 4 3 AUTO ASPECT on page 32 When the AUTO WSS mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode press the ZOOM button and change to another ZOOM mode REGULAR Use to view a normal picture 4 3 aspect ratio as this is its original shape OP LO ONO ONO PANORAMIC This stretches the left and right sides of a normal picture 4 3 aspect ratio to fill the screen without making the picture appear unnatural O Oie O O e The top and bottom of the picture are slightly cut off 14 9 ZOOM This zooms up the wide picture 14 9 aspect ratio to the upper and lower limits of the screen _ 16 9 ZOOM This zooms up wide picture 16 9 aspect ratio to the full screen 16 9 ZOOM
46. imum If you set the DIGITAL VNR function to AUTO LOW but feel that the sharpness of the original picture has not been reproduced fully change the setting from AUTO LOW to MIN The MIN setting 15 not suitable for low quality pictures which contain a lot of noise MAX The level of the DIGITAL VNR effect is set to the maximum If you set the DIGITAL VNR function to AUTO HIGH but still notice some noise change the setting from AUTO HIGH to MAX The MAX setting is not suitable for high quality pictures which contain very little noise Super DigiPure The Super DigiPure function uses the latest in digital technology to give you a natural looking picture The Super DigiPure function includes the following two functions DigiPure function This function helps to create a natural looking picture by eliminating unnecessary edges from high contrast and crisp images For images with low contrast edges are added to produce a sharper more detailed picture You can choose from the three DigiPure function settings of AUTO MIN and MAX If you set the DigiPure effect too high on a low quality picture that contains a lot of noise this may actually make the noise worse We recommend you use the AUTO setting if you can Picture motion compensation function This function displays fast moving pictures for example the players or ball in a football game more smoothly and naturally on the screen
47. ith the T V LINK function Caution This only works when T V LINK compatible VCR is connected to the EXT 2 terminal This only works when the T V LINK menu is being displayed T V LINK DOWNLOAD TV gt VCR DO005 EN 11 12 Setting up your TV 1 Turn the VCR 2 Press the OK button The data transmission begins DOWNLOAD TV VCR D0037 EN The T V LINK menu disappears once the data transmission ends When the T V LINK menu is changed over to another menu The TV has finished its menu This new menu is operated from the VCR See the VCR instruction manual for what to do next If FEATURE NOT AVAILABLE appears at the T V LINK menu Check the following three items Then press the button to retry data transmission Has a T V LINK compatible VCR been connected to the EXT 2 terminal Has the VCR power been turned on Does the SCART cable that 15 connected to the EXT 2 terminal to T V LINK compatible VCR have all its proper connections T V LINK functions When you have a T V LINK compatible VCR connected to the EXT 2 Terminal on the TV it is easier to set up the VCR and to view videos T V LINK uses the following features To use T V LINK functions A T V LINK compatible VCR means a JVC video cassette recorder with the T V LINK logo or with one of the following logos However these VCRs may support some or all of the features described earlier Fo
48. lume Doing so may damage your hearing Never obstruct the ventilation of this equipment Doing so may cause overheating and result in a malfunction or damage Never use makeshift stands or attempt to affix legs with wood screws When using a manufacturer s approved stand or legs use only the fixtures provided and follow the installation instructions Never allow this equipment to be exposed to rain or moisture Never allow anyone especially children to insert anything into an opening in the case Doing so may result in a fatal electrical shock Never guess or take chances with electrical equipment of any kind It is better to be safe than sorry Thank you for buying this JVC colour television To make sure you understand how to use your new TV please read this manual thoroughly before you begin WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE WARNING Always use the power cord which is supplied with the TV and insert it into a correctly earthed outlet Failure to use the supplied power cord or to insert it into a correctly earthed outlet may result in electric shocks WARNING FOR TABLE TOP STAND To ensure safety in an emergency such as an earthquake and to prevent accidents ensure that measures are taken to prevent the TV dropping or falling over Use the supplied screws to firmly attach the supplied hooks to the back of the TV and use commercially av
49. mposite signal S VIDEO signal 6 DVD player composite signal RGB signal D DVD player component video signals Y Pb Pr TV game composite signal RGB signal 9 TV game composite signal S VIDEO signal Headphones 17 Camcorder composite signal S VIDEO signal 12 SCART cable 13 Audio cable Video cable 5 S VIDEO cable Component cable Back of the TV 47 Additional preparation Equipment which can output the S VIDEO signal Y C signal such as an S VHS VCR Connect the equipment to an EXT terminal You can choose between an S VIDEO signal Y C signal and a regular video signal composite signal For details of how to operate the equipment see S IN S VIDEO input on page 43 T V LINK compatible VCR Be sure to connect the T V LINK compatible VCR to the EXT 2 terminal If not the T V LINK function will not work properly e When connecting T V LINK compatible VCR to the EXT 2 terminal be sure to connect the decoder to the VCR If not the T V LINK function may not work properly After you have stored TV channels in the programme numbers PR list set the DECODER EXT 2 function for the programme number PR to ON to unscramble a scrambled TV channel For details see EXT SETTING on page 43 Connecting headphones Connect the headphones with a stereo mini jack 3 5 mm diameter to the headphone socket at the TV rear panel
50. n ra states 23 Teletext function 24 Basic operation 24 Using the List Mode 24 nr 25 SUD DAG st 25 25 DIZ RNA tir 25 INA a 26 CANCER che 26 Using the TV S 27 Basic operation 27 PIC TURE mMenu 29 PICTURE MODE ame 29 CONTRAST is a ns 29 BRIGA T SSSR an aoe ur 29 SHARP Sr ses 29 COLOUR Ru ns Du Ses in ru 29 29 COLOUR TEMP 29 FEATURES 30 SOUND menu 33 SIEREO SH cee et 33 BAS O ates tt 33 TREBLE An aan 33 BALANC E sir 33 SD SOUND Se Sees nner 33 A H B Active Hyper 33 BBE a e eee en eee eee 34 SPEAKER 34 FEATURES 35 SLEEP TIMER sus 35 CRIED LOCK sen nes een 35 APPEARANCE 36 BLUE BACK ccs sonic mms 36 eaten seed areata Sate 37 FAVOURITE 37 SET UP Men 38 AUTO 38 DIT MANUAE SR er 38 LANGUAGE mince en 42 DECODER
51. necting supported After connecting tighten the two screws gt When a picture is not displayed to fix the connector in place With some computers some problems can be solved by changing the settings Check the computer s refresh rate and set it to 60 Hz Computers which cannot have their refresh rate set to 60 Hz cannot be used with this unit Refer to the computer s instruction manual Apple Macintosh is a registered trademark of Apple Computer Inc 46 Additional preparation Connecting external equipment Connect the equipment to the TV making the correct rear panel and front panel connections Before connecting anything Read the manuals that came with the equipment Depending on the equipment the connection method may be different from the diagram Also the equipment settings may need to change depending on the connection method Turn off all the equipment including the TV The Specifications on page 54 give the details of the EXT terminals If you are connecting equipment not listed in the following connection diagram see the table to choose the best EXT terminal Connecting cables are not supplied Connecting the PC For details see Connecting to the computer on page 46 Front of the TV 1 VCR composite signal 2 VCR composite signal S VIDEO signal 3 T V LINK compatible VCR composite signal S VIDEO signal 4 Decoder 5 DVD player co
52. olume level Information function You can see the channel number of the programme you are watching the current time or the PR LIST From the PR LIST you can choose a channel or EXT terminal Press the G Information button to display the information you want to see Pressing the Information button changes the display as follows PR LIST Channel number display No indication D0011 EN Channel number display The channel number and channel name when the channel name is registered of the programme you are watching or the EXT terminal number is displayed Time display The current time of the teletext data is displayed If the TV has not received a TV channel that has teletext programmes since it was turned on the time display is blank To view the current time choose a TV channel that has teletext programmes An incorrect current time is sometimes displayed when watching videos PR LIST The programme number PR and EXT terminal list is displayed Pressing the OK button after choosing the programme number PR or EXT terminal with the lt P W A buttons will display the chosen programme or EXT terminal e For programme numbers PR for which the CHILD LOCK function is set the CHILD LOCK mark is displayed For details see CHILD LOCK on page 35 17 18 Remote control buttons and functions ZOOM function You can change the screen size according to the p
53. ommercially available D SUB cable to connect the TV s PC IN terminal to the computer s analogue RGB output terminal If you want to listen to the sound from the computer use a commercially available RCA cable to connect the EXT 5 sound input terminal to the computer s sound output After starting the computer press the AV or V A buttons to choose PC PC is after 5 You can listen to the sound when the sound from the computer is connected to the EXT 5 sound input terminal terminal See a a When the sound from the computer is mono When the sound from the computer is connect to the EXT 5 L terminal connected to EXT 5 by choosing external input EXT 5 the sound from the computer can be listened to but the images from the computer cannot be seen Table of signals for each type of computer Resolution Vertical Horizontal frequency frequency Hz kHz 640 x 480 31 5 VGA 1024 x 768 42 0 XGA Only the above formats are supported Even with the above formats and at 60 Hz some problems may be experienced depending on the quality of Refer to the computer manual for a the synchronous signal Depending on detailed explanation of the connections at the quality some pictures may not be the computer side displayed properly Ensure that the connectors are facing the Apple Macintosh computers are not correct way when con
54. on the Channel number of the TV channel When the COUNTRY setting is not FRANCE use a two digit CH CC number When the COUNTRY setting is FRANCE use a three digit CH CC number E INSERT 1 Press the W A buttons to choose a programme number PR for which you will register a new TV channel 2 Press the green button and start the INSERT function ID CH CC CH CC 32 BBC1 CH CC 31 CH CC XxX k CH CC 31 D0034 EN To cancel the INSERT function Press the BACK button 3 When the COUNTRY setting is UNITED KINGDOM Press the number buttons to enter the remaining CH number You cannot enter CC numbers When the COUNTRY setting is not UNITED KINGDOM Press the V A buttons to choose CH or CC then enter the remaining CH or CC number When the COUNTRY setting is FRANCE Choose CH2 or CC2 The TV shifts to registration mode When the registration 15 completed the picture of the TV channel appears on the screen The CH CC number is a number given to each broadcast frequency that carries a TV channel If the TV cannot detect the TV channel corresponding to the broadcast frequency indicated by the CH CC number a no signal picture appears SET UP menu MANUAL 1 Press the V A buttons to choose a programme number PR for a new TV channel Press the blue button to activate the MANUAL function CHCC 31 B G k
55. page 33 When TV channel reception is poor it can be hard to hear stereo or bilingual sound In this case follow the description STEREO 1 on page 33 to hear the sound more easily by changing it to a mono sound If the TV does not respond to the remote control e Have the batteries of the remote control worn out Follow the description Putting the batteries into the remote control on page 8 and replace them with new batteries Have you attempted to use the remote control from the sides or rear of the TV or from more than seven metres away from the TV Use the remote control in front of your TV or from less than seven metres away When you are viewing a teletext programme you cannot operate the menus Press the button to return to the ordinary TV programme and then try operating the menus Ifthe TV suddenly stops responding press the button on the TV and turn off the TV Press the button again to turn on the TV If the TV returns to a normal state it is not a failure Troubleshooting Other issues When the SLEEP TIMER function operates the TV 15 automatically turned off If the TV suddenly turns off try to press the standby button to turn on the TV once again If the TV goes back to normal there is no problem When the TV is receiving a wide screen signal WSS or a signal from an external device affecting the screen size the ZOOM mode automatically changes
56. r because the S IN S VIDEO input setting has been made read the device instruction manual carefully again to check for the device settings ID LIST You can store a name for each of the devices connected to each EXT terminal Giving a name to an EXT terminal makes the EXT terminal number appear on the screen together with its name 1 Press the lt gt or V A buttons to choose an EXT terminal 2 Press the blue button to display the name list ID LIST Gh gt Ext SETTING EXT 1 DUBBING ID LIST EXT 2 EXT 3 EXT 5 OOO EXT 4 D0021 EN 3 Press the W A buttons to choose a name Then press the OK button The ID LIST disappears and the name is assigned to the EXT terminal You cannot assign an EXT terminal name not found in the name list ID LIST To erase a name assigned to the EXT terminal Choose a blank space 4 Press the OK button to complete _ the setting DUBBING You can choose a signal source to be output from the EXT 2 terminal You can do this with the output signals of the devices connected to other EXT terminals or with the picture and sound from a TV channel you are currently viewing 1 Press the lt gt buttons to choose the arrow from the menu Gh gt EXT SETTING DUBBING EXT 2 EXT 5 EXT 4 i E DO D0022 EN 2 Press the W A buttons to choose an EXT terminal or TV Then press the OK b
57. r details see your VCR instruction manual Q LINK a trademark of Panasonic Corporation Data Logic a trademark of Metz Corporation Easy Link a trademark of Phillips Corporation Megalogic a trademark of Grundig Corporation SMARTLINE a trademark of Sony Corporation Pre set download The VCR will automatically download the registered data on the TV channels from the TV This means you do not need to set up the program channels on your VCR manually The preset download function automatically begins when the initial setting 1s complete or whenever you carry out the AUTO PROGRAM or EDIT MANUAL functions You can also carry out this function using your VCR controls When FEATURE NOT AVAILABLE is displayed If FEATURE NOT AVAILABLE is displayed the download was not performed correctly Before trying to download again check that the VCR power is turned on the VCR is T V LINK compatible the VCR is connected to the EXT 2 terminal the SCART cable 15 fully wired Direct What You See Is What You Record You can easily record to VCR the images that you are watching on the TV For details read the manual for your VCR Use your VCR controls VCR IS RECORDING is displayed In the following situations the VCR will stop recording if the TV is turned off if the TV channel or input is changed or if the menu is displayed on the TV when r
58. rence in images sound etc In particular keep video equipment away from this product Effect on infrared devices There may be interference while using infrared devices such as infrared cordless headphones Failure to take the following precautions may result in damage to the TV or remote control DO NOT block the TV s ventilation openings or holes If the ventilation openings or holes are blocked by a newspaper or cloth etc the heat may not be able to get out DO NOT place anything on top of the TV such as cosmetics or medicines flower vases potted plants cups etc DO NOT allow objects or liquid into the cabinet openings If water or liquid is allowed to enter this equipment fire or electric shock may be caused DO NOT place any naked flame sources such as lighted candles on the TV The surface of the TV screen is easily damaged Be very careful with it when handling the TV Should the TV screen become soiled wipe it with a soft dry cloth Never rub it hard Never use any cleaner or detergent on it In the event of a fault unplug the unit and call a service technician Do not attempt to repair it yourself or remove the rear cover PICTURE MANAGEMENT demonstration To start the PICTURE MANAGEMENT demonstration Press the MENU button to display the menu bar Then press the yellow button A picture split in two PICTURE MANAGEMENT turned on and PICTURE MANAGEMENT turned off will appear on the screen To q
59. rminal pages 43 47 6 AUDIO OUT terminal page 48 7 CENTRE CH input terminal page 49 Subwoofer out terminal page 48 9 AC INLET page 8 Putting the batteries into the remote control Use two AA R6 dry cell batteries Insert the batteries from the end making sure the and polarities are correct Follow the warnings printed on the batteries Battery life is about six months to one year depending on how much you use the remote control The batteries we supply are only for setting up and testing your TV please replace them as soon as you need to Ifthe remote control does not work properly replace the batteries Setting up your TV Initial settings 2 Press the OK button The LANGUAGE menu appears When the TV is first turned on it goes into the initial settings mode and you will see the lah gt LANGUAGE i ENGLISH k JVC logo Follow the instructions on the FRANCAIS rs DEUTSCH screen display to make the initial settings ITALIANO CASTELLANO NEDERLANDS DANSK EAAHNIKA 0 0 av NORSK PORTUGUES Yellow button SVENSKA v gt gt aa Blue button D0002 E EN OK 3 Press the V A buttons to choose 4 V A buttons ENGLISH Then press the OK 5 button The on screen display will then be in 1 Press the button on the TV English The power lamp lights blue and the JVC The COUNTRY menu appear
60. rogramme number PR 0 AV appears in the programme numbers PR list An EXT terminal number does not appear in the programme numbers PR list The CH CC number is a number unique to the TV and corresponds to the channel number of a TV channel For the relationship between a channel number and a CH CC number see numbers on page 50 MOVE 1 Press the V A buttons to choose a TV channel Every time you press the W A buttons the programme number PR changes and the picture of the TV channel stored in the programme number PR appears on the screen 2 Press the button to start the MOVE function BBC1 __ 31 D0030 EN 3 Press the W A buttons to choose a new programme number PR To cancel the MOVE function Press the BACK button 4 Press the lt button to change the programme number PR of a TV channel to a new programme number PR SET UP menu DELETE 4 Press the blue button to display the 1 Press the W A buttons to choose a ID LIST channel name list TV channel Gh gt EDIT Every time you press the W A buttons the a ID CHICC ID LIST programme number PR changes and the Or CHCC 31 picture of the TV channel stored in the programme number PR appears on the screen 2 Press the yellow button to delete the TV channel The TV channel is deleted from the FREE PR list l PEO er ER Jst 5 Press the V A buttons to choose ID the channel name ID
61. s as a sub logo appears menu of the AUTO PROGRAM function There are two COUNTRY menus Pressing the yellow button changes the COUNTRY menu as follows lah gt COUNTRY UNITED KINGDOM IRELAND DEUTSCHLAND SWITZERLAND FRANCE DANMARK ITALIA SVERIGE ESPANA OSTERREICH NEDERLAND ORGE BELGIUM LUXEMBOURG PORTUGAL POLSKA CESKA REP button MAGYARO POCCUA RUMANIA EAAAAA E 00003 4 Press the lt gt and V A buttons to choose the country where you are For users in the UK To receive SKY 1 you need a satellite tuner You must have the satellite tuner set to SKY 1 before starting the AUTO PROGRAM function which follows Ifthe JVC logo does not appear this 15 because your TV has already been turned on for the first time use the LANGUAGE and AUTO PROGRAM functions to make the initial settings For details see SET UP menu on page 38 Setting up your TV 6 Press the OK button to display the T V LINK menu T V LINK 5 Press the blue button to start the AUTO PROGRAM function The AUTO PROGRAM menu appears and received TV channels are automatically stored in the programme numbers PR DOWNLOAD TV gt VCR gt gt AUTO PROGRAM 00005 If you do not have T V LINK compatible VCR connected Press the button to exit the T V LINK D0004 EN menu Perform the ACI function operation The T V LINK men
62. set the device so that it sends an S VIDEO signal Y C signal to the TV Do not set S IN S VIDEO input to an EXT terminal connected to a device which cannot output an S VIDEO Y C signal If it is set wrongly a picture cannot appear 44 SET UP menu 1 Press the lt gt or V A buttons to choose an EXT terminal Gh gt ext SETTING EXT 1 mae NG EXT 3 00000 EXT4 ID LIST 000 bin D0020 EN 2 Press the yellow button and set the S IN S VIDEO input Then press the OK button An S IN S VIDEO input mark 1s displayed You can view an S VIDEO signal Y C signal instead of the regular video signal composite signal To cancel the S IN S VIDEO input setting Press the yellow button and turn off S IN S VIDEO input mark The regular video signal composite signal pictures are resumed The EXT 3 terminal does not support S VIDEO signal Y C signal and you cannot set S IN S VIDEO input in the EXT 3 terminal Setting S IN S VIDEO input changes the head character from E to S When an EXT terminal receives a normal video signal El E2 or E5 appears on the display This changes to S1 S2 or S5 when it receives an S VIDEO signal e Even device which can output an S VIDEO signal Y C signal may output a regular video signal composite signal depending on the device setting Ifa picture cannot appea
63. t gt buttons to set the item and then press the OK button If there are sub menus use the lt P VW A buttons to operate them Press the BACK button to return to the previous menu Press the TV or MENU button to exit from the menu Types of menu In PICTURE menu Choose to set the screen settings SOUND menu wo Choose to set the sound settings gt FEATURES menu nn Choose to set the sleep timer sus and child lock settings ____ SET UP menu LE Choose to edit the channels or w the display language settings The menu guide area can be made to appear and disappear for some menus While the menu is displayed press the button to change between the guide area being displayed and not displayed gt gt 4 3 AUTO ASPECT PANORAMIC REGULAR 14 9 ZOOM D0017 EN Guide area gt gt 4 3 AUTO ASPECT PANORAMIC k REGULAR 14 9 ZOOM D1017 EN e The guide area for some menus will still be displayed even if the W button is pressed This is not a fault 27 28 Using the TV s menu Operation with the buttons on the TV You can also operate the menus using the buttons on the front panel of the TV V A buttons TV AV button lt gt buttons MENU OK button The menu will disappear after about one minute if no operation is performed PICTURE menu PICTURE PICTURE MODE CONTRAST BRIGHT SHARP COLOUR 4 STANDARD
64. ttings page 9 can be changed 1 Choose LANGUAGE then press the OK button A sub menu of the LANGUAGE function appears Gy gt LANGUAGE ENGLISH SUOMI FRAN AIS POLSKI DEUTSCH CESKY ITALIANO MAGYAR CASTELLANO NEDERLANDS EAAHNIKA PORTUGUES D0002 EN 2 Press the lt gt and V A buttons to choose a language Then press the OK button DECODER EXT 2 If you have a decoder connected to a T V LINK compatible VCR which in turn is connected to the EXT 2 terminal use the DECODER EXT 2 function to unscramble the scrambled TV channels 1 Turn on the decoder power 2 Display the scrambled TV channel on the TV Even if the decoder 15 working a scrambled picture appears 3 Display the SET UP menu and choose DECODER EXT 2 AUTO PROGRAM IS EDIT MANUAL D0029 EN 4 Press the lt gt buttons to choose _ ON An unscrambled picture appears To cancel the DECODER EXT 2 function Press the lt buttons to choose OFF 5 Press the OK button to complete the setting The T V LINK menu appears T V LINK DOWNLOAD TV gt VCR DO005 EN You can send the programme numbers data to a VCR with the T V LINK function 6 Turn on the VCR and then press the OK button to transmit the data to VCR The T V LINK menu disappears once the data transmission ends 7 If you have another TV channel capable of being unscrambled with
65. turned on OFF This function is turned off Licensed by BBE Sound Inc BBE is a registered trademark of BBE Sound Inc SPEAKER You can set the TV speaker mode for when connected to the CENTRE CH input terminal TV The TV sound is emitted from the TV speaker CENTRE The sound from the CENTRE CH input terminal is emitted from the TV speaker FEATURES menu FEATURES SLEEP TIMER CHILD LOCK APPEARANCE BLUE BACK REFRESH FAVOURITE SETTING gt D0023 EN SLEEP TIMER You can set the TV to automatically turn off after a set period of time 1 Choose SLEEP TIMER Then press the OK gt button A Sub menu of the SLEEP TIMER function appears PTY gt SLEEP TIMER D0024 EN 2 Press the lt gt buttons to set the period of time Then press the OK button You can set the period of time for up to 120 minutes 2 hours in 10 minute steps One minute before the SLEEP TIMER function turns off the TV GOODNIGHT appears The SLEEP TIMER function cannot be used to turn off the TV s main power When the SLEEP TIMER function is on you can display the sub menu of the SLEEP TIMER function again to confirm or change the remaining period of time of the SLEEP TIMER function Press the OK button to leave the menu after confirming or changing the remaining time To cancel the SLEEP TIMER function Press the button to set the period of time to
66. u can choose the sound from Bilingual I Sub or Bilingual IT Sub I If you have poor reception on a stereo broadcast you can change from stereo to mono sound so that you can hear the broadcast more clearly and easily Stereo sound Bilingual I sub I mono sound 1 Bilingual sub The sound mode you choose differs depending on the TV programme e This function does not work in the EXT modes BASS You can adjust the low tone of the sound 4 weaker gt strong TREBLE You can adjust the high tone of the sound 4 weaker gt strong BALANCE You can adjust the volume balance between the left and right speaker lt turn the left speaker s volume level up gt turn the right speaker s volume level up 3D SOUND You can enjoy Surround sound with a live effect by using the 3D SOUND function e You can choose a 3D SOUND mode from HIGH LOW MONO and OFF modes For details see 3D SOUND function on page 19 You can also operate the 3D CINEMA SOUND function with the button For details see 3D SOUND function on page 19 A H B Active Hyper Bass Used when you want to emphasize the bass sound ON This function is turned on OFF This function is turned off 33 SOUND menu BBE You can use the BBE function to enjoy easy to listen sound that is faithful to the original sound recorded ON This function is
67. u disappears see page 11 when ACI START ACI If you have a T V LINK compatible SKIP is displayed VCR connected to the EXT 2 To cancel the AUTO PROGRAM terminal function Follow the operating procedure Press the TV button Downloading the data to VCR on page 11 to transmit the Programme number PR data After the TV channels have been registered in the programme numbers PR the EDIT menu Now the initial settings are complete and you can watch the TV When the COUNTRY setting is appears gt A If you want to you can now edit the programme numbers PR using the EDIT MANUAL function For details see EDIT MANUAL on page 38 If you do not want to edit programme numbers PR go to the next step UNITED KINGDOM BBC2 ITV Channel 4 and Channel 5 are automatically set to the programme numbers to PRS If the TV doesn t receive one of these TV channels that programme number PR will not be set Programme number PR6 is not normally set When the COUNTRY setting is not UNITED KINGDOM If your TV can detect the TV channel name from the TV channel broadcast signal the TV channel name is assigned to the programme number PR to which the TV channel has been set However which TV channels are set to which programme numbers PR will depend on the area in which you live Ifa TV channel you want to view is not set to a programme number PR you c
68. u must have the satellite tuner set to SKY 1 before starting the AUTO PROGRAM function 1 Choose AUTO PROGRAM then press the OK or gt button The COUNTRY menu appears as a sub menu of the AUTO PROGRAM function There are two COUNTRY menus Pressing the yellow button changes the COUNTRY menu as follows gt COUNTRY UNITED KINGDOM IRELAND DEUTSCHLAND SWITZERLAND FRANCE DANMARK ITALIA SVERIGE ESPANA OSTERREICH NEDERLAND ORGE BELGIUM LUXEMBOURG PORTUGAL POLSKA REP MAGYARO RUMANIA EAAAAA D0003 EN 2 Press the lt gt and V A buttons to choose the country where you are 3 Perform steps 5 and 6 of the Initial settings page 10 EDIT MANUAL The EDIT MANUAL functions are divided into two types editing the current programme numbers PR EDIT functions and manually storing a TV channel you want to view on a particular programme number PR MANUAL function Here are the details about these functions MOVE This function changes the programme number PR of a TV channel ID This function registers a channel name ID to a TV channel INSERT This function adds a new TV channel in the current programme numbers PR list by using the CH CC number You cannot use the INSERT function if you do not know the channel number of a TV channel Use the MANUAL function to register a TV channel in the programme number PR
69. uit the PICTURE MANAGEMENT demonstration Press the yellow button TV button V A buttons or any of the number buttons CONTENTS Checking the contents of packages 5 Setting up your TV 6 6 Connecting the aerial and video cassette recorder VCR 7 Connecting the power cord to the AC o e ee nt ut 8 Putting the batteries into the remote sca ae pea ee ati 8 Initial settings 9 T V LINK functions 12 TV buttons and functions 14 Turn the TV on from standby mode 14 Choose a TV 14 Adjust the volume 14 Using the 14 Remote control buttons and FUNC CONS 15 Turn the TV on or off from standby mode 15 Choose a TV channel and watch images from external devices 16 Adjust the volume 17 Information function 17 ZOOM function cena eeees 18 3D SOUND function 19 Return to TV channel instantly 19 Using the FREEZE function 19 Using the MULTI PICTURE function 20 Favourite channel 22 Operating a JVC brand VCR or DVD DIVERS n
70. ut with 625p progressive scanning component signals If this happens change the output setting of the connected device to 6251 interlace scanning component signal output See the instructions that came with the device for more information The PC sound is the same as the EXT 5 sound To return to a TV channel Press the TV button the W A buttons or the number buttons To use the programme number PR 0 AV When the TV and VCR are connected only by the aerial cable choosing the programme number PR 0 AV allows you to view images from the VCR Set the VCR RF channel to the programme number PR 0 AV manually For details see EDIT MANUAL on page 38 Pressing the AV button changes the choice as follows TV mode EXT modes EEE EE On i PRO EXT 1 1 Programme i 1 numbers E1 or s1 PR1 PR99 Ea E 1 2 1 1 3 1 4 1 i EXT 5 1 1 Remote control buttons and functions The VCR sends its playback image along the aerial cable as an RF radio frequency signal Also see your VCR instruction manual Adjust the volume Press the 22 buttons to adjust the volume The volume indicator appears and the volume changes as you press 221 buttons E Muting the sound Press the amp muting button to turn off the sound Pressing the amp muting button again restores the previous v
71. utton The arrow in the menu represents a signal flow The left side of the arrow shows a signal source output from the EXT 2 terminal EXT 1 EXT 3 EXT 5 The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT 2 terminal SET UP menu TV The picture and sound of the TV channel you are currently viewing are output from the EXT 2 terminal During dubbing you cannot turn off the TV Turning off the TV also turns off the output from the EXT 2 terminal When you choose an EXT terminal as an output you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT 2 terminal The RGB signals from TV games cannot be output Teletext programmes cannot be output PICTURE SHIFT The picture displayed on the screen is shifted up down and to the left and right at regular intervals In order to prevent burn in set this function to FAST or SLOW 1 Choose PICTURE SHIFT 2 Press the lt gt buttons to choose mode OFF PICTURE SHIFT is turned off SLOW The picture is shifted every 30 minutes FAST The picture is shifted every 10 minutes 3 Press the OK button The menu disappears 45 Displaying a computer screen This TV can be used as a computer screen Looking at images from Connecting to the computer computer Use a c
72. your COLOUR SYSTEM settings correct Follow the description COLOUR SYSTEM on page 32 to try to solve the trouble Have the COLOUR and BRIGHT settings been adjusted properly Follow the description BRIGHT and COLOUR on page 29 to try to adjust them properly Videotaping teletext is not recommended because it may not record correctly When a white and bright still image such as a white dress is displayed on the screen the white part may look as if it 15 coloured This is unavoidable due to the nature of the picture tube itself and not due to a TV failure When the picture disappears from the screen the unnatural colours will also disappear When viewing images from commercially available video software products or videos from videotapes which have been recorded improperly the top of the image may be distorted This is due to the condition of the video signal There 1s nothing wrong with the TV Since this TV is designed to make full use of the resolution of the original video source the motion may appear unnatural when the video source is input with 625p progressive scanning component signals If this occurs change the output setting of the connected device to 6251 interlace scanning component signal output See the instructions that came with the device for more information E Poor sound Have you adjusted BASS or TREBLE properly If not follow the description BASS or TREBLE on

JVC PD-35S50J User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents