JVC KV-C1 User's Manual
Contents
1. BRIGHT oc CD Press the AUTO STORE button for 2 seconds or longer AUTO SEARCH 40CH Shows the channel Shows how far numbers contained the channel in memory search has gone Channels stored in memory 2 When automatic storage is finished press the y or A can be viewed in order button for less than 2 seconds and select the channel you would like to watch ANN AN V lt Changes in the direction of smaller channel numbers Changes in the direction of larger channel numbers Note There are times when channels which cannot be viewed are stored in memory This is not a malfunc tion or problem The channels stored in the memory by the Auto Store function cannot be erased During Auto Store The voice muting circuit is activated and cuts unpleasant noise 16 ontrolling the Sound Selecting the volume of the built in speakers The TV tuner system is set to the STANDARD at the time of shipment from the factory 1 Press the MODE button for 2 seconds or longer SPEAKER MODE VIDEO MODE DIMMER MODE END MAs MODE 2 Select the SPEAKER MODE SPEAKER MODE VIDEO MODE DIMMER MODE END MASS iseer 3 Press the MENU button SPEAKER MODE STANDARD NAVIGATION MUTE v A seuecr EWJenrer MENU Note If no operations are performed for a period of 30 seconds after pressing the MODE button The Menu configuration screen automatica2. 5 After the DIMMER MODE screen disappears occurs af ter about 10 seconds press the Menu button for less than 2 seconds and show the automatic dimmer darkness level display 6 Use the V or A button to adjust brightness to the best visibility at night Note When the adjustment is made to the best visibility at night the system automatically adjusts the level between the maximum brightness and the brightness for the best visibility at night mini mum brightness It is recommended that the setting be put between 40 and 60 e When 0 is set the value is fixed to the maximum level and the brightness does not change Adjusting Brightness For the manual mode The screen brightness can be adjusted manually I o u Z T D Press the MODE button for 2 seconds or longer SPEAKER MODE VIDEO MODE Note DIMMER MODE m END When END is selected the system returns to the initial screen MAR MODE 2 Select the DIMMER MODE SPEAKER MODE VIDEO MODE DIMMER MODE END MAS iseer 3 Press the MENU button DIMMER MODE AUTO MANUAL MENU 28 DIMMER MODE AUTO MANUAL V A sevect ENUJenter 10 NNNMNNN MENU BRIGHT 10 4 Select the MANUAL Mode Note When the MANUAL Mode is selected in advance With the wireless remote controller it is possible to set this level directly using the Brightness button
3. 5 After the DIMMER MODE screen disappears occurs af ter about 10 seconds press the MENU button for less than 2 seconds and show the brightness display 6 Use the V or A button to adjust the brightness to your preferred level Example Adjusting the bass level Note BLACK BASS CONT TREBLE COLOR BALANCE TINT SURROUND END seer MENU BLACK BASS CONT TREBLE COLOR BALANCE TINT SURROUND END BASS 0 miim MENU BASS 5 minimi nnm idjusting the Sound CD Press the MENU button for 2 seconds or longer 2 Select BASS 3 Press the MENU button 4 Adjust the BASS level Note After 10 seconds passes The BASS Agjustment screen automatically disappears e When END is selected the system returns to the initial screen Bass Treble Balance and Surround do not change in the case of a built in speaker I o u Z T 24 Adjustment points The bass treble and balance be adjusted from the setting screens BASS 1 5 mmn imn Bass is reduced TREBLE 1 5 mmm Treble is reduced BALANCE 1 5 mmm Sound output of the right side is lowered SURROUND OFF V A setect MEENT level of low tones level of high tones BALANCE Balances the sound output between the left and right speakers SURROUND BASS 1 5 mf Bass is increased TREBLE 1 5 unm nin Treble is increased BALANCE
4. JVC I o A g Z T SISTEMA DE SINTONIZADOR DE TV M VIL SYSTEME DE TUNER DE T L VISION MOBILE with internal diversity antenna and wireless remote controller zm con antena de diversidad interna y controlador remote inal mbrico avec antenne de r ception en diversit et module de t l commande sans cordon FRANCAIS ESPANOL POWER TV VIDEO DN DN AUTO STORE M Tuner unit Sintonizador Unit de tuner Diversity antenna Wireless remote controller Antena de diversidad Controlador remoto inal mbrico Antenne de r ception en diversit Module de t l commande sans cordon For optional view of TV broadcast it is necessary to connect the tuner unit with the JVC mobile color monitor system KV M65 sold separately For installation and connections refer to the Para ver opcionalmente una emisi n de TV resulta necesario separate manual conectar el sintonizador con el sistema de monitor en coler m vil Para realizar la instalaci n y las conexiones JVC modelo KV M65 vendido separadamente consulte el manual separado Pour un visionnement optionnel des missions de t l vision il Pour l installation et les raccordements se faudra raccorder le tuner avec syst me de moniteur couler mobile r f rer au manuel s par JVC KV M65 vendu s par ment For customer Use INSTRUCTIONS Enter below the serial No which is located on the rear of cabinet Retain MANUAL DE INSTRUCCIONES
5. 1 5 umm Sound output of the left side is lowered SURROUND ON V A setect MEENT The feature gives a 3D effect to the sound when VIDEO or VIDEO2 is in stereo format djusting the Image Example Adjusting the black level BLACK BASS CONT TREBLE COLOR BALANCE TINT SURROUND END vllAlisos MENU BLACKBASS CONT TREBLE COLOR BALANCE TINT SURROUND END Bela BLACK 0 nmm MENU BLACK 1 5 minimi ES POWER MODE E CD Press the MENU button for 2 seconds or longer Note e When END is selected the system returns to the initial screen For an RGB screen only the Black level and Contrast are shown Not used at present f no operations are performed for a period of 30 seconds after pressing the MENU button The Menu configuration screen automatically disappears 2 Select BLACK 3 Press the MENU button 4 Adjust the Black level Note After 10 seconds passes The Black level adjustment screen automatically disappears I o u Z T 26 Adjustment points Image features can be adjusted from the various setting screens Makes the black portions of the BLACK screen easier to see Night BLACK 15 umido scenes black hair etc 15 umm fan Adjust the Black Level when there is an inversion of the black and white on the screen or the screen appears too white due to an imbalance in the relationship between the i
6. 19 6 cm 7 3 4 depth 14 2 cm 5 5 8 height 3 8 cm 1 1 2 Mass 930 g 2 1 lbs Power source DC 3V lithium coin battery Remote controller Within a range of about 3 meters distance from the front of operation distance the display Dimensions Width 4 0 cm 1 5 8 length 8 6 cm 3 7 16 height 0 7 cm 5 16 Mass 16 g 0 04 lbs without the battery Output impedance 750 x 4 with mini plug Cable length 4 m 13 3 ft Dimensions About width 46 cm 18 1 8 height 46 cm 18 1 8 depth 1 8 cm 3 4 without the cable Mass each unit About 165 g 0 37 lbs including the cable Overall system 2 i c 2 Ek controller Wireless remote Diversity antenna L9 Ol VICTOR COMPANY OF JAPAN LIMITED Printed in Japan TB een rn B Pies inian re Y 4
7. steps Lower the volume on the TV tuner system Use earphones when the camera has an earphone jack Keep the tuner system and the camera microphone apart I o u Z T Movement T Interference OCCUIS Doubling and tripling of images ghosts wu MEE Interference HN SA occurs at PUE Image quality gradually worsens and color instability displayed and then disappear L Spots appear on the screen Color patterns appear on the screen colors are lost A plane flies overhead A train passes close by Near electricity transmission wires Distance from the broadcast station Near the transmission antenna of a radio station or an amateur wireless station or when a wireless device is being used in a vehicle Ihen You Think There is a Problem Please check the following items one more time When this occurs Check these points page There are red blue and green spots on the screen There is sound output but no video output only the channel number is shown There is no television image and also no sound The wireless remote controller does not work There is no sound from the speakers The screen is dark The screen black and white portions are inverted The screen is too white The color is thin The tint is off This is a characteristic of liquid crystal panels and is not a problem The liquid crystal panel is built with very high preci
8. E WHEN THROWING AWAY OR SAVING THE BATTERIES WRAP IN TAPE AND INSULATE IF THIS IS NOT DONE IT MAY CAUSE THE BATTERIES TO GIVE OFF HEAT CRACK OR START A FIRE DO NOT POKE THE BATTERIES WITH A METAL PIN SET OR SIMILAR DEVICE IF THIS IS NOT DONE IT MAY CAUSE THE BATTERIES TO GIVE OFF HEAT CRACK OR START A FIRE D i Doo OM Safety Points continued Be sure to follow these points CAUTION Change or modifications not approved by JVC could void user s authority to operate the equipment This equip ment has been tested and found to comply with the lim its for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide rea sonable protection against harmful interference in a resi dential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television recep tion which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit diff
9. ING OPERATING THE TV TUNER SYSTEM WHILE DRIVING MAY LEAD TO CARELESSNESS AND CAUSE AN ACCIDENT STOP YOUR VEHICLE IN A SAFE LOCATION WHEN OPERATING THE TV TUNER SYSTEM THE DRIVER MUST NOT WATCH THE TELEVISION OR VIDEOS WHILE DRIVING IF THE DRIVER WATCHES THE TELEVISION OR A VIDEO WHILE DRIVING IT MAY LEAD TO CARELESSNESS AND CAUSE AN ACCIDENT DO NOT USE THE TV TUNER SYSTEM WHEN THERE IS A PROBLEM OR MALFUNCTION IF THE TV TUNER SYSTEM IS USED IN AN ABNORMAL CONDITION SUCH AS WHEN THE TV TUNER SYSTEM IS EMITTING SMOKE OR AN UNUSUAL SMELL IT MAY CAUSE A FIRE OR SOME OTHER PROBLEM IMMEDIATELY STOP USING THE TUNER SYSTEM AND CONSULT THE SALES OUTLET WHERE YOU PURCHASED THE TUNER SYSTEM DO NOT TAKE THE TV TUNER SYSTEM APART OR MAKE ANY CHANGES IF THE TUNER SYSTEM IS TAKEN APART OR CHANGED IN ANY WAY IT MAY CAUSE MALFUNCTIONS OR A FORE OR OTHER ACCIDENT DO NOT PUT YOUR EYES OR FACE NEAR THE ANTENNA ELEMENT IF YOU PUT YOUR EYES OR FACE NEAR THE ANTENNA ELEMENT YOU COULD BE INJURED STORE THE BATTERIES IN A PLACE WHICH CHILDREN CANNOT REACH IF A CHILD SOMEHOW INGESTS THE BATTERY IMMEDI ATELY CONSULT A DOCTOR DO NOT RECHARGE SHORT DISASSEMBLE OR HEAT THE BATTERIES OR PUT THEM IN A FLAME DOING ANY OF THESE THINGS MAY CAUSE THE BATTERIES TO GIVE OFF HEAT CRACK OR START A FIRE DO NOT MIX THE BATTERIES WITH OTHER METALS DOING THIS MAY CAUSE THE BATTERIES TO GIVE OFF HEAT CRACK OR START A FIR
10. age temperature range 20 C to 80 C 4 F to 176 F During the summer temperatures can reach as high as 100 212 F When the liquid crystal panel reaches high temperatures or low temperatures chemical changes occur within the liquid crystal panel which may cause malfunctions There are red spots blue spots and green e When the temperature is very cold or very hot spots on the panel surface This is a charac the image may not appear clearly or may teristic of liquid crystal panels and is not a move slowly problem Also movement of the image may seem to be out of sync or the image quality may decline in such environments Note that this is not a malfunction or problem usage temperature range 0 C to 40 C 32 F to 104 F 0 C 32 F or colder Ese Nu The liquid crystal panel is built with very high T 40 104 F or hotter precision technology and has at least 99 9996 effective image pixels Be aware that on 0 01 of the panel there may be missing pixels or constantly light pixels BEEN b Thank you for purchasing a JVC product Please read all instructions carefully before operation to ensure your complete understanding and to obtain the best possible performance from the unit Table of Contents Introduction to the Roles of the System Components 6 How to Use the TV Tuner System Watching Television ocoooonncccc
11. atteries to give off heat crack or start a fire When throwing away or saving the batteries wrap in tape and insulate If this is not done it may cause the batteries to give off heat crack or start a fire Do not poke the batteries with a metal pin set or similar device Doing this may cause the batteries to give off heat crack or start a fire POWER POWER Indicates that channel 8 is received TVVIDEO MODE Changes with each push of the button Vatching Television a Ml all o BRIGHT VOLUME D Engage the parking brake and turn on the engine Note e When the display unit is installed in a location which can be viewed from the driver s seat the television image disappears while driv ing and only the sound can be heard The best image is seen by looking straight on at the liquid crystal panel 2 Turn on the display unit power source Changes to the green light and a screen appears in the mode before turning the power source off When pushed again the power source is cut red light turns on Request When AM radio broadcast is received while the display unit power is left on there may be interference with the car radio If this occurs please turn the TV tuner system off 8 Select the television screen from the input sources Note Refer to pages 13 to 18 for an explanation of how to select channels or control the sound I 9 O Z T 12 o C Watching Tele
12. ed in the SPEAKER MODE configuration this is used to adjust the speaker sound level When MUTE is selected in the SPEAKER MODE this is used to adjust the sound output level of the extension AV output terminal 10 o C Before using the wireless remote controller How to replace the battery e A battery is already installed in the wireless remote con troller Remove the insulation film before using When it becomes necessary to bring the wireless remote controller close to the remote sensor for it to work the battery is ins low Atthis point the battery should be replaced Battery life is about 1 year with normal use back side Lithium coin gt lt battery product number CR2025 back side 7 Remove the battery case 8 Push in the direction indicated by the arrow with your right hand thumbnail D Remove the battery case 2 Replace the battery Put the battery in the case with the side facing upwards 3 Return the battery case Re insert the battery case pushing until you hear a clicking sound WARNING Store the batteries in a place which children cannot reach If a child somehow ingests the battery immediately consult a doctor Do not recharge short disassemble or heat the batteries or put them in a flame Doing any of these things may cause the batteries to give off heat crack or start a fire Do not mix the batteries with other metals Doing this may cause the b
13. erent from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Cautions BE SURE TO INSERT THE BATTERIES PROPERLY IN THE amp O DIRECTIONS IF THIS IS NOT DONE IT MAY CAUSE THE BATTERIES TO GIVE OFF HEAT CRACK OR START A FIRE WHEN LIGHTNING OCCURS DO NOT TOUCH THE ANTENNA WIRE OR THE TELEVISION TOUCHING THE ANTENNA WIRE OR THE TELEVISION UNDER SUCH CONDITIONS MAY CAUSE ELECTROCU TION KEEP THE TV TUNER SYSTEM AT AN APPROPRIATE SOUND LEVEL WHILE DRIVING DRIVING WITH THE SOUND AT A LEVEL THAT PREVENTS YOU FROM HEARING SOUNDS OUTSIDE OF AND AROUND THE VEHICLE MAY CAUSE AN ACCIDENT ASK A TRAINED TECHNICIAN TO INSTALL THE TV TUNER SYSTEM INSTALLATION AND WIRING REQUIRE TRAINING AND EXPERIENCE TO BE SAFE ASK THE SALES OUTLET WHERE YOU PURCHASED THE TV TUNER SYSTEM TO PERFORM THE INSTALLATION DO NOT LET THE TV TUNER SYSTEM FALL OR BE STRONGLY IMPACTED BE SURE TO NOT LET THE TUNER SYSTEM FALL OR BE STRONGLY IMPACTED SINCE THIS MAY CAUSE A MALFUNCTION OR FIRE DO NOT WATCH THE MONITOR WITH THE ENGINE OFF WATCHING THE MONITOR WITH THE ENGINE OFF WILL CONSUME BATTERY POWER AND MAY PREVENT THE ENGINE FROM STARTING I o Z ui Cautions for the liquid crystal panel sold separately Do not leave the liquid crystal panel surface Do not strongly impact the liquid crystal panel facing upwards on top of the dashboard stor
14. h they are stored in memor Operations on the display unit DOG D Press the MENU button 3 times quickly and select the CH MODE CH MODE AUTO MANUAL MENU 2 Select AUTO CH MODE AUTO MANUAL 5 e 3 After the CH MODE display disappears press the y or iub A button for 2 seconds or longer 23 4 6 8 10 12 Shows the channel numbers stored in memory Channels stored in memory 4 When automatic storage is finished press the y or A are seen in order button for less than 2 seconds and select the channel you V would like to watch fh A Note Changes in the Changes in the e What is automatic storage Auto Store direction of direction of This function automatically picks up the broadcast waves which can be re smaller channel larger channel ceived in the region where the tuner system is being used and stores them numbers numbers in memory A memory of channels can be easily added when out on a drive or other location When the automatic storage function is used the chan nels previously stored in the memory are lost When automatic storage is finished The system returns to the channel being used prior to the automatic stor age operation When you are in a region where the electric waves are weak It may not be possible to store channels in memory 15 Operating the wireless remote controller I o O Z T TVNIDEO N AD AUTO STORE 1 2
15. lly disappears 7 4 Select STANDARD SPEAKER MODE NA ATUN SELECT ENUJENTER After the SPEAKER MODE screen disappears occurs af ter about 10 seconds press the Menu button for less than 2 seconds and show the speaker volume level display VOLUME SO MINIMI MENU 6 Adjust the speaker volume level VOLUME SO MMMM Sound level 0 60 levels V CL ee 1 Note Relationship between the Speaker Mode setting and the built in speaker volume Built in speaker volume Speaker mode setting Television Video 1 Video 2 STANDARD Television sound Video 1 sound Video 2 sound NAVIGATION Not used at present Please select either STANDARD or MUTE MUTE There is no sound output from the speakers Speaker output is monaural sound It is not heard as stereo sound I o u Z T 18 Adjusting the volume output level of the AV output terminal SPEAKER MODE STANDARD NAVIGATION MUTE v sger EWJenrer SOUND LEVEL 40 MINIMINI MENU SOUND LEVEL 40 AM rom CD Perform steps 1 to 3 on page 16 8 Press the MODE button for 2 seconds or longer D Select the SPEAKER MODE setting using the V and A buttons O Press the MENU button 2 Select MUTE Note When MUTE is selected in advance With the remote controller the volume level can be adjusted directly using the volume button 3 After the SPEAKER MODE setting sc
16. mage the surface of the unit Alcohol Clean dirt by wiping lightly with a soft cloth When the unit is very dirty wipe with a well wrung cloth dipped in a kitchen cleanser neutral thinned by water and then go over the same surface with a dry cloth Since there is the possibility of water drops getting inside of the unit do not directly apply cleanser to the surface CD Wring well Wipe lightly 2 Go over the same surface with a dry cloth APA T A Kitchen cleanser thinned by water Request If water drops or similar wet substances get inside of the monitor via the liquid crystal panel sur face it may cause a malfunction pecifications ENGLISH Product type Mobile TV tuner system Power source voltage DC 14 4V can be used within the range of 11V to 16V negative ground only Reception channels VHF channels 2 to 12 UHF channels 13 to 69 Usage temperature range 0 C to 40 C 32 F to 104 F Storage temperature range 20 C to 80 C 4 F to 176 F Connection terminals Power ground parking brake remote output connection terminals 10 pin connector Diversity antenna connection terminal 750hm M3 mini jack Display unit connection terminal 13 pin DIN connector AV input 1 and input 2 terminals Video 1Vp p 75Q RCA pin Audio 0 5Vrms RCA pin AV output terminal Video 1Vp p 75Q RCA pin Audio 0 to 0 5 Vrms RCA pin consecutive change supported by sound level adjustment Dimensions Width
17. nstallation position of the monitor and eye level When the Black Level is When the Black Level is on the negative side on the positive side Normally set in the middle CONT Move to the right for more CONT 15 mmm contrast 15 ma pnm COLOR 15 TOTO AO ECC COLOR Setting to slightly 15 Jn thicker colors Colors are less vivid Colors are more vivid TINT Setting for attractive TINT 15 15 umm skin color Skin color has a greenish tint Skin color has a red dish purplish tint onnecting to External Devices Connection example 1 Mobile video machine or video camera AV input 1 and car stereo Audio output To car stereo Tuner unit SS SN fro DISPLAY UNIT O Oe Q E eS 00000 D c2 L AUDIO R Sa S Connection example 2 Mobile video machine AV input 1 and 2nd monitor AV output Tuner unit AV INPUT 1 POWER DISPLAY UNIT nnuna ooooo VIDEOO L AUDIO R VIDEO L AUDIO R AV INPUT 2 Note e Refer to the installation manual for an explanation of how to make these connections e Since the connection cord varies depending on what external devices are connected refer to the video equipment manual as well For connection of a mobile video machine or video camera When howling a pi sound occurs take one of the following
18. onccononncononnnonoronononononononononcnnnnnnos 11 Selecciona NET T 13 Sois AS 16 Adjusting Brightness 19 PRIS SOU rad 23 Adjusting the Image 25 Connecting to External 27 How to Best Use the TV Tuner System Troubleshooting essere 28 When You Think There is a Problem 29 Maintenant sra 30 Specifications OO 31 Eee itroduction to the Roles of the System omponents Tuner unit Terminal for connecting a mobile video machine video camera or other device Not used at present AV INPUT 2 YS Terminal for connecting a 2nd monitor or car stereo audio output EE NE Dn Terminal for connecting a mobile video machine video camera or other device Terminal for connecting the display unit Terminal for connecting the power cord Terminal for connecting the diversity antenna Introduction to the Roles of the System Components continued KV M65 display unit sold separately POWER MODE MENU Cp Cp I o g Z ui Normally Changing the channel setting in the upward or downward direction Used to turn the power source ON and OFF When setting vari
19. ous menus Menu selection When setting various adjustment modes Adjustment and switching Used to display select and determine the various adjustments screen menu Used to display the configuration screen for changing the input source and the various function menus To view TV broadcasts it is necessary to connect the tuner unit with the JVC mobile color monitor system KV M65 sold separately Dimmer sensor This sensor automatically adjusts the screen brightness When Auto Mode is set for the Dimmer Setting the screen brightness is Wireless remote controller light receiver automatically adjusted to one of 12 levels to suit the surrounding Used when the JVC mobile TV tuner brightness system KV C1 is connected STAND BY R ON G When the power is off red When the power is on green lt lt Terminal for connecting the cable from the controller unit on the right side Speaker on the back side Screw holes are provided for attaching the monitor stand on the bottom side 1 4 inch unify screw maximum length of 4 5 mm MODE button When pressed for less than 2 seconds The input source can be changed Television channel number When pressed for 2 seconds or longer The setting screens for various functions can be displayed SPEAKER MODE SPEAKER MODE VIDEO MODE NAVIGATION DIMMER MODE MA END T MENU SELECT RGB MODE NAVIGATION NO CONNECT MA
20. reen disappears oc curs after about 10 seconds press the MENU button for less than 2 seconds and show the volume level display 4 Adjust the volume output level of the AV output terminal Note When the SPEAKER MODE setting is on STANDARD The output level is fixed to the maximum of 60 and cannot be adjusted See page 17 for more details djusting Brightness For the automatic mode The TV tuner system is set to the Auto Mode at the time of shipment from the factory Automatically adjusts the screen brightness to suit the brightness of the surrounding environment SPEAKER MODE VIDEO MODE DIMMER MODE END MODE SPEAKER MODE VIDEO MODE DIMMER MODE END DIMMER MODE AUTO MANUAL SELECT INU ENTER MENU D Press the MODE button for 2 seconds or longer Note When END is selected the system returns to the initial screen 2 Select the DIMMER MODE 3 Press the MENU button X 9 Z T 20 DIMMER MODE AUTO MANUAL V A setect DIMMER LEVEL 55 MENU DIMMER LEVEL 55 When set to 0 the brightness does not change Y A CN 1f r ES 4 Select AUTO Note e When the AUTO Mode is selected in advance With the wireless remote controller it is possible to set this level directly using the Brightness button without having to bring up the DIMMER MODE screen
21. s MA MENU button When pressed for less than 2 seconds The adjustment screen display can be selected The following diagram shows an example for the Speaker Output Setting on All Modes and the Dimmer Setting on Auto Mode VOLUME BRIGHT CH MODE 30 10 AUTO MANUAL When pressed for 2 seconds or longer The menus for image and sound can be displayed CONT TREBLE COLOR BALANCE Displayed only when VIDEO1 SELECT v AT osos or VIDEO is selected When setting the menus The Menu selection and adjustment can be decided Introduction to the Roles of the System Components continued Wireless remote controller The numbers in the circles C 2 indicate the page on ENGLISH which an explanation is provided in this manual Used to turn the power source ON and OFF Used to select the television channels in order The Mode names are displayed when the television is not being used In the automatic mode Used to set to the best visibility brightness level for night time RM RK26 REMOTE CONTROL UNIT In the manual mode Used to adjust the screen brightness Used to change the input source VIDEO 1 Used to pick up receivable broadcast waves and store them in memory Furthermore the channels stored in memory can be viewed in order Mode names are displayed when the television is not being used 16 to 18 When STANDARD is select
22. sion technology and has at least 99 99 effective image pixels Be aware that on 0 0196 of the panel there may be missing pixels or constantly light pixels s the parking brake connection wire gray color connected Was the parking brake lever pulled Mode Button s the Mode button set to video input 1 screen or video input 2 screen or to RGB Has the battery run out s a strong light shining on the remote controller receiver s the remote controller for this tuner system being used Speaker Volume Adjustment Is the volume on the lowest level Speaker Output Setting Is the setting on No Output Brightness Black Level and Contrast Are the settings properly adjusted Color and Tint Are the settings properly adjusted 29 Hefer to the installation manual 16 17 18 19 to 22 25 26 25 26 o O Z T aintenance To prevent damage to the system exterior Do not apply pesticides benzine thinner or other volatile substances to the unit The cabinet surface primarily consists of plastic ma terials Do not wipe with benzine thinner or similar sub stances because this will results in discoloration or removal of the paint When a cloth with a cleansing chemical is used follow the caution points Do not leave the unit in contact with rubber or vinyl products for long periods of time Do not use cleansers which have polishing gran ules because this could da
23. this information for future reference MANUEL D INSTRUCTIONS Model No K C1 Serial No 4 Z o TQBX0225 J 2 Safety points Be sure to follow these points CAUTIONS A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions the literature accompanying the appliance WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE CAUTION This TV tuner system should be used with DC 12V only To prevent electric shocks and fire hazards DO NOT use any other power source This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Cet appareil num rique de la classe B respecte toutes les exigences du R glement sur le mat riel brouilleur du Canada Warnings THE DRIVER MUST NOT OPERATE THE TV TUNER SYSTEM WHILE DRIV
24. vision continued lt Disappears 4 Select the channel you would like to watch after a short time Note When the bright and dark portions of the screen are inverted or the screen appears white Refer to pages 25 and 26 and adjust the Black Level M 5 Adjust the sound level of the car receiver connected to the KV C1 sound output Car receiver with Line In terminal C gt Sa E Speakers 13 Selecting a Channel For manual channel selection changing the channel setting one channel at a time When the remote controller is used channels can be directly selected using the CHANNEL button D DO I o Z T KV M65 display unit D Press the MENU button times quickly and the CH MODE display is shown ro MODE AUTO MANUAL MENU 2 Select MANUAL CH AN AUTO MANUAL 3 After the CH MODE display disappears press the y or A button for less than 2 seconds and select the channel you would like to watch Note V e When the V or A button is pressed for 2 seconds or longer m The system will automatically select a channel and stop at a channel where broadcast is being received Changes one Changes one channel at atime channel at a time in the direction of in the direction of smaller numbers larger numbers 14 o C Selecting a Channel continued For automatic storage channel selection used to view channels in the order in whic
Download Pdf Manuals
Related Search