Home

JVC KD-LX330R User's Manual

1. 2 Select the character set you want to use 72 amp Each time you press the button the character set changes as follows Capital letter ff gt Small letter Numbers 7 A 3 Select a letter magen Ra I TI TIL dema Bud AE La 4 Move the character entry position to the next 5 Repeat steps 2 to 4 until you enter all 4 characters 6 Press SEL select to finish the setting A The password flashes on the O display for a while then the unit returns to the normal operation mode How to Use the Provided CODE Sticker Attach the provided CODE sticker in a conspicuous position on your car to notify would be unauthorized users that the security lock function is provided for this unit and therefore will foil their efforts When Security Lock works Once you register the password appears on the display and the unit will ask you to enter the password in the following cases e When you turn on the unit for the first time after re installing the unit e When you turn on the unit for the first time after replacing the car battery To use this unit you must enter the correct password by following the procedure below 1 Press DISP display to select the character set you want 2 Turn the control dial to enter a character 3 Press A PB or dd v to move the character entry position 4 Repeat steps 1 to 3 to enter the entire password
2. Under license from BBE Sound Inc BBE is a trademark of BBE Sound Inc Using the sound control memory You can select and store a preset sound adjustment suitable for each playback source Advanced SCM Selecting and storing the sound modes Once you select a sound mode it is stored in memory It will be recalled every time you select the same source and will be shown on the display A sound mode can be stored for each of the following sources FM1 FM2 FM3 AM CD and external components e If you do not want to store the sound mode separately for each playback source but want to use the same sound mode for all the sources see To cancel Advanced SCM SCM LINK on page 24 1 Press MODE BAND BAND The number buttons can work N as different function buttons Within 5 seconds Select the sound mode you want Each time you press the button the sound mode changes as follows gt SCM BEAT gt SCM SOFT SCM OFF SCM POP lt When SCM LINK is set to SCM LINK ON the selected sound mode can be stored in memory for the current source and the effect applies only to the current source Each time you change the playback source the SCM indicator flashes on the display When SCM LINK is set to SCM LINK OFF the selected sound mode effect applies to any source Indication For Preset values Bass Treble BBE SCM BEAT Bock or di
3. 1 Vor der berpr fung der Funktionsfahigkeit des Ger ts vor dem Einbau muB diese Leitung angeschlossen werden da sonst die Stromversorgung nicht eingeschaltet werden kann 1 Pour v rifier le fonctionnement de cet appareil avant installation ce fil doit tre raccord sinon l appareil ne peut pas tre mis sous tension 1 Voordat u controleert of het apparaat werkt alvorens het te installeren moet deze draad aangesloten zijn Als dit niet het geval is kan de stroom niet worden ingeschakeld To car light control switch Zur Autolichtschalter z A l interrupteur d clairage de la voiture ILLUMINATION Naar de schakelaar voor de autoverlichting Ze To power aerial if any Zur Motorantenne sofern vorhanden A l antenne automatique s il y en a une Naar de antenne indien aanwezig Orange with white stripe Orange mit wei em Streifen Orange avec bande blanche Oranje met witte streep To cellular phone system Zur Mobiltelefon A un systeme de t l phone cellulaire Naar het mobiele telefoonsysteem Brown Braun Marron Bruin Bi B3 White with black stripe ae White Gray with black stripe Gray Green with black stripe Green Purple with black stripe Purple Wei mit schwarzem Streifen Wei Grau mit schwarzem Streifen Grau Gr n mit schwarzem Streifen Gr n Lila mit schwarzem Streifen Lila B
4. 28 Using the security lock eee 30 CD CHANGER OPERATIONS 32 Playing AR 32 Selecting CD playback modes 33 EXTERNAL COMPONENT OPERATIONS 35 Playing an external component 35 Using a subwoofer nnn 35 DAB TUNER OPERATIONS 36 Tuning into an ensemble and one of the Services EE ennen nen nenvenn 36 Storing DAB services in memory 37 Tuning into a preset DAB service 38 What you can do more with DAB 39 ADDITIONAL INFORMATION 40 TROUBLESHOOTING 41 MAINTENANCE A 42 Handling CDS u ne 42 SPECIFICATIONS A 43 About the demonstration mode DEMO MODE When shipped from the factory DEMO MODE is set to DEMO ON in this unit The demonstration will start automatically if no sound comes in for 3 minutes See page 26 To activate the display demonstration manually While holding DISP press A kk until DEMO appears on the display Various functions and display illumination modes equipped with this unit will be demonstrated repeatedly in sequence During the display demonstration DEMO flashes on the display To turn off the display demonstration press A Fb again for a few seconds while holding DISP e The display demonstration will turn off automatically after about 1 hour BEFORE USE For safety e Do not raise the volume level too much
5. NO DISC will appear on the display If this happens remove the magazine and set the discs correctly RES In ESES appears on the Disc number appears display something is wrong with the connection between this unit and the CD changer If this happens check the connection connect the connecting cord s firmly if necessary then press the reset button of the CD changer To fast forward or reverse the track Press and hold A gt while playing a CD to fast forward the track Press and hold 44 w while playing a CD to reverse the track Press A PPI briefly while playing a CD to go ahead to the beginning of the next track Each time you press the button consecutively the beginning of the next track is located and played back Press L a WV briefly while playing a CD to go back to the beginning of the current track Each time you press the button consecutively the beginning of the previous tracks is located and played back 29 a5 GU 0 Z m 30 To go to a particular disc directly Press the number button corresponding to the disc number to start its playback while the CD changer is playing MONO LOCAL To select a disc number from 1 6 Press 1 7 6 12 briefly To select a disc number from 7 12 Press and hold 1 7 6 12 for more than 1 second Track number Elapsed playing time l d F T UU gt I mn RN 14 Dis
6. 4 letters correctly then press SEL select lf you enter the correct password the security loek is canceled and you can use the unit normally e In the following cases the security lock is not canceled NOT ACCEPT appears on the display then the unit turns off The unit will never turn on unless you press the reset button on the front panel See page 2 Ifyou enter an incorrect password then press SEL select If you cannot finish entering the correct password within 30 seconds If you enter an incorrect character while entering the password Press WA W to move back the character entry position over the incorrect character then repeat steps 1 and 2 to select the correct character or To change the password If you want to change the password after you have registered it follow the procedure below 1 Press SEL select and A gt at the same time for more than 2 seconds S appears on the display 2 Enter the current password correctly then press SEL select The unit enters password entry mode 3 Enter a new password as you want then press SEL select The password flashes on the display for a while then the unit returns to the normal operation mode e See page 30 for details on how to enter the password x 0 l O Z H 31 a5 2 0 2 wi 32 We recommend that you use on
7. RESET 8 appears on the display This unit is not connected to a CD changer correctly Connect this unit and the CD changer correctly and press the reset button of the CD changer RESET 1 RESET 7 appears on the display Press the reset button of the CD changer EJECT ERROR appears on the display and CD cannot be ejected No message appears on the display but CD cannot be ejected The CD player may function incorrectly Press and hold lt lt v for more than 5 seconds While holding A gt press the reset button Release the reset button then release A ppl Be careful not to drop the CD when ejecting zis appears on the display Security lock is in use Enter the password See page 31 This unit does not work at all The CD changer does not work at all The built in microcomputer may function incorrectly due to noise etc Press the reset button on the front panel See page 2 41 EE H 0 Z m 42 MAINTENANCE Handling CDs This unit has been designed to reproduce the CDs bearing the following marks COMPACT okee DIGITAL AUDIO You can play back your original CD Rs Recordable and CD RWs Rewritable on this receiver This unit is not compatible with MP3 How to handle CDs When removing a CD from its case press down the center holder of the case and lift the CD out holding it by the edge
8. Z m 12 A The same programme can be received on different frequencies Programme 1 broadcasting on frequency A Programme 1 broadcasting on frequency E AG St SSN ans Programme 1 broadcasting on frequency B Programme 1 broadcasting on frequency C Programme 1 broadcasting on frequency D Using Standby Reception Standby Reception allows the unit to switch temporarily to your favourite programme PTY Programme Type and Traffic Announcement TA from the current source another FM station CD and other connected components e Standby Reception will not work if you are listening to an AM station TA Standby Reception When you press TP RDS while O listening to an FM station the TP indicator is lit during reception of a TP Traffic Programme station and the TA standby mode is engaged e When the station being received is not a TP station the TP indicator flashes Press A bBlor la w to engage the TA standby mode SEARCH appears on the display and TP station search starts When a TP station is tuned in the TP indicator is lit E f you are listening to a CD or other connected components and wish to listen to a TP station press TP RDS to enter the TA standby mode The TP indicator lights up If a traffic programme starts broadcasting while the TA standby mode is active TRAFFIC appears and the playback source changes to the FM band The volume
9. FOLK M gt DOCUMENT gt back to the beginning For details see page 40 a 4 Press SEL select to finish the setting Ss Searching your favourite programme You can search one of your 6 favourite programme types stored in memory When shipped from the factory the following 6 programme types have been stored in the number buttons 1 to 6 To store your favourite programme types see below To search your favourite programme type see page 14 1 2 3 POPM ROCKM EASY M 4 5 6 CLASSICS AFFAIRS VARIED To store your favourite programme types 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display PSM see page 23 N Select PTY SEARCH if not shown on the display Select one of twenty nine PTY codes See left column Selected code name appears on the display If the code already stored in memory is selected it will flash on the display CONTINUED ON NEXT PAGE ba GU 0 H 13 A 4 Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset number you want MONO L DORDDOD a5 2 0 Z m PTY preset number appears and selected code name and MEMORY alternate on the display 5 Press SEL select to finish the setting OX To search your favourite programme type 1 Press and hold PTY pr
10. Ihrem Auto nicht sicher wenden Sie sich an Ihren Autoh ndler e cordon d alimentation la batterie sinon l appareil serait serieusement endommage Connectez correctement le fil noir a la masse le fil jaune a la batterie de la voiture 12 V constant et le fil rouge a la prise accessoire AVANT de connecter les fils d enceintes du cordon d alimentation aux enceintes v rifiez le c blage des enceintes de votre voiture Si le c blage des enceintes de votre voiture est comme montr sur la Fig 1 ou Fig 2 ci dessous NE CONNECTEZ PAS l appareil en utiliscant ce c blage original des enceintes Si vous le faites l appareil sera s rieusement endommage Recommencez le c blage des enceintes de fagon que vous puissiez connecter l appareil aux enceintes comme montr sur la Fig 3 Si le c blage des enceintes de votre voiture est comme montr sur la Fig 3 vous pouvez connecter l appareil en utiliscant ce c blage original d enceintes pour votre voiture Si vous n tes pas s rs du c blage d enceintes de votre voiture consulter le concessionnaire de votre voiture Verbind de speakerdraden van de stroomkabel NIET met de accu van de auto als u dit wel doet zal het apparaat ernstige schade oplopen e Sluit de zwarte draad aarde de gele draad naar de accu van de auto constant 12 V en de rode draad naar de aansluitklem van de accessoire op de juiste wijze aan VOORDAT u de spea
11. ON at TELEPHONE Telephone muting MUTING 1 gt MUTING2 TING OFF 24 t MUTING OFF T BEEP SW Key touch tone BEEP OFF BEEP ON BEEP ON 24 SCROLL Scroll mode SC ad oo ONCE En EXT INPUT External component CHANGER LINE INPUT CHANGER 25 FLAT PANEL Flat panel FLAT OFF FLATON FLAT OFF 25 IF FILTER Tee frequency WIDE AUTO AUTO 25 ilter DEMO MODE Demo mode DEMO OFF DEMO ON DEMO ON 25 4 Press SEL select to finish the setting Displayed only when the DAB tuner is connected Displayed only when one of the following sources is selected FM AM and CD I 0 l Z H 23 a5 GU 0 2 H 24 WE To cancel Advanced SCM SCH LINK You can cancel the Advanced SCM Sound Control Memory and unlink the sound modes and the playback sources When shipped from the factory a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources e LINK ON Advanced SCM different sound modes for different sources e LINK OFF Conventional SCM one sound mode for all sources To set the clock display CLOCK DISP You can set the clock to be shown on the lower part of the display when the unit is turned on When shipped from the factory the clock is set to be shown on the display e CLOCK ON Clock display is turned on CLOCK OFF Clock display is turned off When CLOCK OFF is selected the current sound mode setting se
12. See To select the external component to use EXT INPUT on page 25 3 Adjust the volume 32 DAB TUNER OPERATIONS DAB ba CU 0 2 H e 4 B EL EI DEE We recommend that you use DAB Digital Audio Tunin into an ensemble and Broadcasting tuner KT DB1500 with your unit g If you have another DAB tuner consult your JVC ONE of the services IN CAR ENTERTAINMENT dealer Refer also to the Instructions supplied with your A typical ensemble has 6 or more programmes DAB tuner services broadcast at the same time After tuning into an ensemble you can select a service you What is DAB system PARE DAB is one of the digital radio broadcasting 1 Select the DAB tuner DAB1 3 systems available today It can deliver CD quality sound without any annoying interference and Las signal distortion Furthermore it can carry text e pictures and data In contrast to FM broadcast where each programme is transmitted on its own frequency 2 Select the DAB band DAB1 DAB2 or DAB combines several programmes called DAB3 services to form one ensemble i With the DAB tuner connected with this unit gt you can enjoy these DAB services Each time you press and hold the button the DAB band changes as follows u DAB1 DAB2 DAB3 7 Note This receiver has three DAB bands DAB1 DAB2 DAB3 You c
13. Static noise while listening to the radio The antenna is not connected firmly Connect the antenna firmly NO DISC appears on the display No CD is in the magazine Insert CD RESET 8 appears on the display This unit is not connected to a CD changer correctly Connect this unit and the CD changer correctly and press the reset button of the CD changer RESET 1 RESET 7 appears on the display Press the reset button of the CD changer EJECT ERR appears on the display and CD cannot be ejected No message appears on the display but CD cannot be ejected The CD player may function incorrectly Press and hold lt lt W for more than 5 seconds While holding A gt press the reset button Release the reset button then release A ppl Be careful not to drop the CD when ejecting 8888 appears on the display Security lock is in use Enter the password See page 28 This unit does not work at all The CD changer does not work at all The built in microcomputer may function incorrectly due to noise etc Press the reset button on the front panel See page 2 37 a5 GU 0 Z m 38 MAINTENANCE Handling CDs This unit has been designed to reproduce the CDs bearing the following marks DIGITAL AUDIO You can play back your original CD Rs Recordable and CD RWs Rewritable on this receiver
14. This unit is not compatible with MP3 Center holder EN How to handle CDs When removing a CD from its case press down the center holder of the case and lift the CD out holding it by the edges e Always hold the CD by the edges Do not touch its recording surface When storing a CD into its case gently insert the CD around the center holder with the printed surface facing up Make sure to store CDs into the cases after use To keep CDs clean A dirty CD may not play correctly If a CD does become dirty wipe it with a soft cloth in a straight line from center to edge To play new CDs New CDs may have some rough spots around the inner and outer edges If such a CD is used this unit may reject the CD To remove these rough spots rub the edges with a pencil or ball point pen etc About mistracking Mistracking may result from driving on extremely rough roads This does not damage the unit and the CD but will be annoying We recommend that you stop CD play while driving on such rough roads Moisture condensation Moisture may condense on the lens inside the CD player in the following cases After starting the heater in the car If it becomes very humid inside the car Should this occur the CD player may malfunction In this case eject the CD and leave the unit turned on for a few hours until the moisture evaporates When playing a CD R or CD RW User edited CD Rs
15. anderen Ger ts an so da es ber dieses Ger t E gesteuert werden kann e For amplifier only en eo e Nur f r den Verst rker Connect this unit s line out terminals to the amplifier s Die Anschlu klemmen am Ausgang dieses Ger t line in terminals an den Anschlu klemmen des Eingangs des Disconnect the speakers from this unit connect Verst rkers anschlie en them to the amplifier Leave the speaker leads of Die Lautsprecher von diesem Ger t abtrennen this unit unused und am Verst rker anschlie en Die For KD LX330R only The line output level of this unit autsprecherleitungen dieses Ger ts unbenutzt is kept high to maintain the hi fi sounds reproduced assen n i H Nur f r den KD LX330R Der Ausgangspegel When connecting an external amplifier to this unit dieses Ger ts wird auf einem hohen Wert gehalten turn down the gain control on the external amplifier to ung den E obtain the best performance from this unit Ger t reproduziert Wenn Sie einen externen Verst rker an dieses Ger t anschlie en stellen Sie den Verst rkungsregler des externen Verst rkers herunter um die bestm gliche Leistung dieses Ger ts zu erzielen Signal cord not supplied with this unit Einzelleitung nicht mit diesem Ger t mitgeliefert Cordon de signal non fourni avec cet appareil Signaalkabel wordt niet bij dit apparaat geleverd JVC Amplifier rn JVC Verst rker JVC Amplifica
16. driven augmentation When combined with the phase compensation feature the resulting sound has a clearer more finely detailed live presence As you turn the control dial the BBE function changes as follows BBE 1 lt gt BBE 2 lt gt BBE 3 gt BBE OFF a Canceled Kai Kai I i amp BBE BBE gt BBE 1 2 3 Canceled OFF As the number gets higher the BBE function becomes stronger When shipped from the factory the BBE function is set to BBE 2 To cancel the BBE function select BBE OFF Under license from BBE Sound Inc BBE is a trademark of BBE Sound Inc Using the sound control memory You can select and store a preset sound adjustment suitable for each playback source Advanced SCM Selecting and storing the sound modes Once you select a sound mode it is stored in memory It will be recalled every time you select the same source and will be shown on the display A sound mode can be stored for each of the following sources FM1 FM2 FM3 AM CD and external components e If you do not want to store the sound mode separately for each playback source but want to use the same sound mode for all the sources see To cancel Advanced SCM SCM LINK on page 24 1 Press MODE BAND BAND The number buttons can work as different function buttons Within 2 Select the sound mode you
17. e The following illustration shows a typical installation However you should make adjustments corresponding to your specific car If you have any questions or require information regarding installation kits consult your JVC IN CAR ENTERTAINMENT dealer or a company supplying kits e Die folgende Abbildung zeigt einen typischen Einbau Dennoch m ssen Sie entsprechend Ihrem jeweiligen Auto Anpassungen vornehmen Bei irgendwelchen Fragen oder wenn Sie Informationen hinsichtlich des Einbausatzes brauchen wenden Sie sich an ihren JVC Autoradioh ndler oder ein Unternehmen das diese Einbaus tze vertreibt e l illustration suivante est un exemple d installation typique Cependant vous devez faire les ajustements correspondant votre voiture particuli re Si vous avez des questions ou avez besoin d information sur des kits d installation consulter votre revendeur d autoradios JVC ou une compagnie d approvisionnement e Op de volgende afbeelding kunt u zien hoe de installatie normaal gesproken in zijn werk gaat U moet echter bij de installatie rekening houden met de bijzonderheden van uw eigen auto Neem bij vragen of voor meer bijzonderheden over inbouwpakketten contact op met uw JVC car audio dealer of een dealer of een bedrijf dat inbouwpakketten levert 1 Remove the trim plate 2 Remove the sleeve after disengaging the sleeve locks Stand the unit Note When you stand the unit be careful not to damage the
18. excluding accessories Design and specifications subject to change without notice 39 Having TROUBLE with operation Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb Bitte setzen Sie Ihr Ger t zur ck Siehe Seite Zur cksetzen des Ger ts Vous avez des PROBLEMES de fonctionnement Reinitialisez votre appareil Referez vous la page intitul e Comment r initialiser votre appareil Hebt u PROBLEMEN met de bediening Stel het apparaat terug Zie de pagina met de paragraaf Het apparaat terugstellen a EN GE FR NL LA 0201MNMMDWTKR KD LX330R KD LX110R Installation Connection Manual Einbau Anschlu anleitung Manuel d installation raccordement Handleiding voor installatie aansluiting PIM163000 E x SS T 0201 MNMMDWTKR EN GE FR NL ENGLISH DEUTSCH FRANCAIS NEDERLANDS e This unit is designed to operate on 12 V DC NEGATIVE ground electrical systems INSTALLATION IN DASH MOUNTING e Dieses Ger t ist f r einen Betrieb in elektrischen Anlagen mit 12 V Gleichstrom und Erdung ausgelegt EINBAU IM ARMATURENBRETT e Cet appareil est con u pour fonctionner sur des sources de courant continu de 12 V a masse NEGATIVE INSTALLATION MONTAGE DANS LE TABLEAU DE BORD e Dit apparaat mag worden gebruikt bij elektrische systemen die werken op 12 V gelijkstroom met negatieve aarding INSTALLATIE INBOUW IN HET DASHBOARD
19. DAB services in each DAB band DAB1 DAB2 and DAB3 manually 1 select the DAB tuner DAB1 3 Counce Press SOURCE to select G DAB tuner as the source 2 If necessary press and hold MODE BAND repeatedly to select the DAB band number DAB1 DAB2 or DAB3 Each time you press and hold the button the DAB band changes as follows u DAB1 DAB2 DAB3 7 2 Tune into an ensemble you want 3 Select a service of the ensemble you want z 2 5 Press MODE BAND MODE appears on the display N Press A Peoria v to select a service you want while MODE is still on the display DAS 4 Press and hold the number button in Tuning into a preset DAB this example 1 you want to store the service selected service into for more than 2 seconds You can easily tune into a preset DAB service Remember that you must store services first If you have not stored them yet see pages 34 and 35 x 0 O Z H 1 Select the DAB tuner DAB1 3 Press SOURCE to select CS DAB tuner as the source ra E N If necessary press and Band number and hold MODE BAND MEMO appear alternately for a while Ge eege ch DAB1 DAB2 or DAB3 Each time you press and hold the button the DAB band changes as follows 5 Repeat the above procedure to store DAB1 gt DAB DAB3 other DAB services into other preset numb
20. EJECT appears on the display To move up the display panel press A P or aa vw To cancel the prohibition and unlock the CD press and hold OFF amp for more than 2 seconds again while pressing SOURCE EJECT OK flashes on the display for about 5 seconds and the CD is unlocked In a CD Text some information about the disc its disc title performer and track title is recorded You can show these disc information on the display Select text display mode while playing a CD Text Los O Each time you press the button the display changes as follows y Disc Title Performer Y Track Title Y Current track no and Elapsed playing time Notes e The display shows up to 10 characters at one time and scrolls if there are more than 10 characters See also To select the scroll mode SCROLL on page 24 e When you press DISP while playing a conventional CD NO NAME appears for the disc title performer and the track title SOUND ADJUSTMENTS amp Adjusting the sound You can adjust the sound characteristics to your preference T Select the item you want to adjust Es gt BASS TREBLE gt FADER Each time you press the button the adjustable items change as follows L VOLUME lt BBE lt BAL lt balance Indication To do Range BASS Adjust the bass 06 min 06 max TREBLE Adjust the tre
21. Recordable and CD RWs Rewritable can be played back only if they are already finalized e You can play back your original CD Rs or CD RWs recorded in music CD format However they may not be played back depending on their characteristics or recording conditions Before playing back CD Rs or CD RWs read their instructions or cautions carefully Some CD Rs or CD RWs may not be played back on this unit because of their disc characteristics damage or stain on them or if the player s lens is dirty CD Rs or CD RWs are susceptible to high temperatures or high humidity so do not leave them inside your car CD RWs may require a longer readout time This is caused by the fact that the reflectance of CD RWs is lower than for regular CDs CAUTIONS e Do not insert 8 cm CDs single CDs into the loading slot Such CDs cannot be ejected e Do not insert any CD of unusual shape like a heart or flower otherwise it will cause a malfunction e Do not expose CDs to direct sunlight or any heat source or place them in a place subject to high temperature and humidity Do not leave them in a car e Do not use any solvent for example conventional record cleaner spray thinner benzine etc to clean CDs AUDIO AMPLIFIER SECTION Maximum Power Output Front 50 W per channel Rear 50 W per channel Continuous Power Output RMS Front 19 W per channel into 4 40 Hz to 20 000 Hz at no more than 0 8 tot
22. Select a PSM item you want to adjust See page 23 3 Set the minute Select CLOCK MIN Adjust the minute P 1 4 Setthe clock system Select 24H 12H Adjust 24HOUR or 12HOUR 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary N 2 1 5 Press SEL select to finish the setting 5 Press SEL select to finish the setting KS 22 Preferred Setting Mode PSM items 2 Sr aer Hold Select Counter lt x clockwise Clockwise CLOCK HOUR Hour adjustment Back Advance 0 00 55 CLOCK MIN Minute adjustment Back Advance SCH LINK Sound control memory LINK OFF LINK ON LINKON 20 24 linkage 24H 12H 24 12 hour time display 12HOUR 24HOUR 24HOUR 22 AUTO ADJ Automatic clock setting ADJ OFF ADJ ON ADJ ON 15 CLOCK DISP Clock display CLOCK OFF CLOCK ON CLOCK ON 24 TUNER DISP Tuner display FREQUENCY PS NAME PS NAME 15 PTY STBY PTY standby 29 programme types NEWS 13 PTY SEARCH PTY search See pages 13 and 37 NEWS 13 TA VOL an eidi VOL 00 VOL 50 VOL 20 15 P SEARCH Programme search SEARCH OFF SEARCHON SEARCH OFF 14 DAB AF Alternative frequency AF OFF AF ON AF ON 36 search LEVEL Level display 4 types See page 24 NORMAL 24 DIMMER Dimmer mode AUTO gt OFF AUTO 24 t
23. Vauxhall geldt You may need to modify the wiring of the supplied power cord as illustrated e Contact your authorized car dealer before installing this unit Sie m ssen evtl die Verdrahtung des mitgelieferten Stromkabels wie abgebildet ndern e Wenden Sie sich an Ihre Vertragswerkstatt bevor Sie das Ger t einbauen Vous aurrez peut tre besoin de modifier le c blage du cordon d alimentation fourni comme montr sur l illustration NEDERLANDS if your car is equipped with the ISO connecter Wenn Ihr Auto mit ISO Steckern ausgestattet ist Si votre voiture est quipp e d un connecteur ISO Indien uw auto is uitgerust met de ISO connector e Connect the ISO connectors as illustrated e Die ISO Stecker wie abgebildet anschlie en Connectez les connecteurs ISO comme montr sur l illustration e Sluit de ISO connectoren aan zoals op het voorbeeld is aangegeven SS From the car bod e Contactez votre revendeur automobile autoris avant d installer l appareil y Von der Karosserie Wellicht moet u de bedrading van het meegeleve
24. and goes off alternately Searching a station manually Manual search 1 Select the band Csource 1 Press SOURCE to select FM or AM as the source P If necessary press and hold MODE BAND to select the FM band number FM1 FM2 or FM3 Each time you press and hold the button the FM band changes as follows Ki gt FM2 eg Note This receiver has three FM bands FMI FM2 FM3 You can use any one of them to listen to an FM broadcast 2 Press and hold A ppl ord v until M manual starts flashing on the display 3 Tune into a station you want while M is flashing Press A ppl to tune into stations of higher frequencies zee Press ida w to tune into stations of lower frequencies If you release your finger from the button the manual mode will automatically turn off after 5 seconds e If you hold down the button the frequency keeps changing in 50 kHz intervals for FM and 9 kHz intervals for AM MW LW until you release the button When an FM stereo broadcast is hard to receive 1 Press MODE BAND while listening to an FM stereo broadcast the ST indicator lights up while receiving an FM stereo broadcast MODE appears on the lower part of the display and the number buttons can work as different function buttons 2 Press MONO while MODE is still on the display so that the MO indicator lights up on the display The sound you hear becomes mo
25. anders kunt u het paneel zodanig beschadigen dat dit niet meer kan worden geopend en gesloten Trim plate Frontrahmen Plaque d assemblage Sierplaat Handle Griff Poign e Hendel 2 Slot Schlitz Fente Sleuf Fuse Sicherung Fusible Zekeri er Lock Plate Arretierpl ttchen Plaque de verrouillage Vergrendelingsplaat Halterung J Manchon Huis 3 Trim plate Frontrahmen Plaque d assemblage Sierplaat Rubber cushion Gummipuffer Amortisseur en caoutchouc Rubberdop Sleeve Halterung Manchon Huis Dashboard Armaturenbrett Tableau de bord Dashboard Mounting bolt Befestigungsschraube Boulon de montage Bevestigingsbout See ELECTRICAL CONNECTIONS Siehe ELEKTRISCHE ANSCHL SSE Referez vous RACCORDEMENTS ELECTRIQUES Zie ELEKTRISCHE VERBINDINGEN TROUBLESHOOTING FEHLERSUCHE EN CAS DE DIFFICULTES PROBLEMEN OPLOSSEN The fuse blows Are the red and black leads connected correctly Die Sicherung brennt durch Sind die roten und schwarzen Leitungen richtig Le fusible saute Les fils rouge et noir sont ils racord s correctement De zekering slaat door Zijn de rode en de zwarte draden op de juiste manier angeschlossen Stromversorgung kann nicht eingeschaltet werden Ist die gelbe Leitung angeschlossen Kein Ton aus den Laut
26. as this will block outside sounds making driving dangerous e Stop the car before performing any complicated operations Temperature inside the car If you have parked the car for a long time in hot or cold weather wait until the temperature in the car becomes normal before operating the unit x 0 l O Z H a5 CU 0 Z m lt LOCATION OF THE BUTTONS Control panel CD loading slot Display panel 1 2 3 17 T RLE DODDDONDENENA 4 5 6 7 8 9 uUo 11 12 13 14 15 16 The control panel slides out when you press ON CLOSE When you press OF F amp the display panel moves down and the CD loading slot appears 1 Control dial 7 SCM sound control memory button 2 A Flag v button 8 MONO button A P a V also functions as ON or 9 LOCAL button CLOSE button D INT intro button 3 Remote sensor 1 RPT repeat button 4 SEL select button 2 RND random button 5 DISP display button 3 SOURCE button e Also functions as SSM buttons when pressed A TP traffic programme together with the MODE BAND button RDS radio data system button 6 MODE BAND button 5 PTY programme ty
27. bornes des enceintes gauche et droit sont elles mises ensemble a la masse L appareil devient chaud Le fil de sortie d enceinte est il a la masse Les bornes des enceintes gauche et droit sont elles mises ensemble a la masse D D D D ze ze xe e ER D e When using the optional stay Washer Fire wall Unterlegscheibe Feuerwand Rondelle Cloison Sluitring Brandscherm Dashboard Armaturenbrett Tableau de bord Dashboard Sleeve Halterung Manchon Huis e Beim Verwenden der Anker Option e Lors de l utilisation du hauban en option e Wanneer u de steun gebruikt facultatief Stay option Anker Option Hauban en option Steun facultatief Lock nut Sicherungsmutter Ecrou d arr t Contra moer Screw option Schraube Option Vis en option Schroef facultatief Mounting bolt Befestigungsschraube Boulon de montage Bevestigingsbout Flat type screws M5 x 6 mm Senkkopfschrauben M5 x 6 mm Vis a t te plate M5 x 6 mm Platkopschroeven M5 x 6 mm e When installing the unit without using the sleeve e Beim Einbau des Ger ts ohne Halterung e Lors de l installation de l appareil scans utiliser de manchon e Wanneer u het apparaat zonder huis installeert In a Toyota for example first remove the car radio and install the unit in its place Zum Beispiel in einem Toyota z
28. change the password If you want to change the password after you have registered it follow the procedure below 1 Press SEL select and A ppl at the same time for more than 2 seconds RAR RT appears on the display 2 Enter the current password correctly then press SEL select The unit enters password entry mode 3 Enter a new password as you want then press SEL select The password flashes on the display for a while then the unit returns to the normal operation mode e See page 27 for details on how to enter the password ba CU 0 2 H N ZZE SOES Bea We recommend that you use one of the CH X Playing CDs series with your unit If you have another CD automatic changer consult your JVC IN CAR ENTERTAINMENT dealer for connections e For example if your CD automatic changer is one of LS the KD MK series you need a cord KS UI5K for connecting it to this unit Select the CD automatic changer TA Each time you press the button the source changes as described on page 7 Playback starts from the first track of the first disc All tracks of all discs are played back Before operating your CD automatic changer e Refer also to the Instructions supplied with your CD changer e If no discs are in the magazine of the CD Track number Elapsed playing time ae marcy ey changer or the discs are inserted upside down
29. changes e Functions as the DISC button while listening to the CD changer Each time you press the button the disc number increases and the selected disc starts playing e Does not function as the PROG button w D e Functions as the PRESET button while listening to the radio or the DAB tuner Each time you press the button the preset station number increases and the selected station is tuned in e Functions as the DISC button while listening to the CD changer Each time you press the button the disc number decreases and the selected disc starts playing Functions the same as the control dial on the main unit NOTE This button does not function for the preferred setting mode adjustment Selects the sound mode Each time you press SCM Sound Control Memory the mode changes Selects the source Each time you press FUNC function the source changes e Searches stations while listening to the radio e Selects services while listening to the DAB tuner if pressed briefly e Searches ensembles while listening to the DAB tuner if pressed for more than 1 second Fast forwards or reverses the track if pressed and held while listening to a CD e Skips to the beginning of the next track or goes back to the beginning of the current or previous track if pressed briefly while listening to a CD x 0 sl Z H amp Preparing the remote
30. de achterste luidspreker van de ISO connector van de auto door en sluit deze draden aan op de versterker Vordere Lautsprecher JVC Amplificateur mm Enceintes avant JVC Versterker EPP Voorspeakers For KD LX330R only You can connect another power amplifier for front speakers Nur f r den KD LX330R Sie k nnen einen anderen Leistungsverst rker f r die vorderen Lautsprecher anschlieBen Pour le KD LX330R seulement Vous pouvez connecter un autre amplificateur de puissance pour les enceintes avant Alleen voor KD LX330R U kunt nog een eindversterker voor de voorspeakers aansluiten Rear speakers Hintere Lautsprecher Enceintes arri re Achterspeakers Front speakers Vordere Lautsprecher Enceintes avant Voorspeakers CAUTION VORSICHT PRECAUTION LET OP e To prevent internal heat buildup inside this unit place this unit UNDER the other equipment e Zur Vermeidung eines Hitzestaus in diesem Ger t dieses Ger t UNTER die andere Ger teansr stung stellen e Pour viter un chauffement interne de cet appareil placez le SOUS lautre appareil e Om interne verhitting van het apparaat te voorkomen dient u ervoor te zorgen dat het apparaat ONDER de andere apparatuur wordt geplaatst CD changer and DAB tuner CD Wechsler und DAB Tuner Changeur CD et tuner DAB CD wisselaar en DAB tuner You can connect a JVC CD changer and or a JVC DAB Sie k nnen einen CD Wechsler und oder einen DAB Vous pouv
31. display PSM see page 23 KS Select PTY STBY standby if not shown on the display Select one of twenty nine PTY codes Selected code name appears on the display and is stored into memory As you turn the control dial the PTY codes change as follows PTY codes NEWS AFFAIRS INFO SPORT EDUCATE z gt DRAMA CULTURE z gt SCIENCE z gt VARIED gt POP M ROCK M EASY M LIGHT M CLASSICS OTHER M gt WEATHER FINANCE CHILDREN gt SOCIAL gt RELIGION gt PHONE IN gt TRAVEL LEISURE JAZZ COUNTRY NATION M gt OLDIES gt FOLK M DOCUMENT back to the beginning For details see page 36 a 4 Press SEL select to finish the setting Ss Searching your favourite programme You can search one of your 6 favourite programme types stored in memory When shipped from the factory the following 6 programme types have been stored in the number buttons 1 to 6 To store your favourite programme types see below To search your favourite programme type see page 14 1 2 3 POPM ROCKM EASYM 4 5 6 CLASSICS AFFAIRS VARIED To store your favourite programme types 1 Press and hold SEL select for more than 2 seconds so that one ofthe PSM items appears on the display PSM see page 23 Select PTY SEARCH if not shown on the display Select one of twenty nine PTY codes See left colum
32. forum Programmes about travel destinations package tours and travel ideas and opportunities Programmes concerned with recreational activities such as gardening cooking fishing etc Jazz music Country music Current popular music from another nation or region in that country s language Classic pop music Folk music Programmes dealing with factual matters presented in an investigative style What appears to be trouble is not always serious Check the following points before calling a service centre Symptoms TROUBLESHOOTING OI Causes Remedies CD cannot be played back CD is inserted upside down Insert the CD correctly x 0 O Z H CD sound is sometimes interrupted You are driving on rough roads Stop CD play while driving on rough roads CD is scratched Change the CD Connections are incorrect Check the cords and connections Sound cannot be heard from the speakers The volume level is set to the minimum level Adjust it to the optimum level Connections are incorrect Check the cords and connections SSM Strong station Sequential Memory automatic preset does not work Signals are too weak Store stations manually Static noise while listening to the radio The antenna is not connected firmly Connect the antenna firmly NO DISC appears on the display No CD is in the magazine Insert CD
33. increases to the preset TA volume level see page 15 and the traffic programme can be heard To deactivate the TA standby mode press TP RDS again PTY Standby Reception When you press PTY while listening to an FM station the PTY indicator is lit during reception of a PTY station and the PTY standby mode is engaged The selected PTY name stored on page 13 flashes for 5 seconds When the station being received is not a PTY station the PTY indicator flashes Press A Pei oriaa w to engage the PTY standby mode SEARCH appears on the display and PTY station search starts When a PTY station is tuned in the PTY indicator is lit E f you are listening to a CD or other connected components and wish to listen to a selected PTY broadcast press PTY to enter the PTY standby mode The PTY indicator lights up If the selected PTY programme starts broadcasting while the PTY standby mode is active the selected PTY name appears and the playback source changes to the FM band The selected PTY programme can then be heard To deactivate the PTY standby mode press PTY again Selecting your favourite programme for PTY Standby Reception You can select your favourite programme for PTY Standby Reception to store in memory When shipped from the factory NEWS is stored as the programme type for PTY Standby Reception 1 Press and hold SEL select for more than 2 seconds so that one ofthe PSM items appears on the
34. into a preset station 10 Playing an external component 32 RDS OPERATIONS aininiaaennanann 11 DAB TUNER OPERATIONS 33 What you can do with RDS EON 11 Tuning into an ensemble and one of the Other convenient RDS functions and Ge TEE 33 adjustments un een 14 Storing DAB services in memory 34 Tuning into a preset DAB service 35 CD OPERATIONS een 16 What you can do more with DAB 36 Playing a CD 16 Locating a track or a particular portion ADDITIONAL INFORMATION 36 OM ACD nanne rdnr ran 17 Selecting CD playback modes 47 TROUBLESHOOTING 37 Prohibiting CD lt naart 18 MAINTENANCE natens tista 38 Playing a GD Text nee 18 Handling CDS nnn 38 SOUND ADJUSTMENTS 19 SPECIFICATIONS 39 Adjusting the sound irinse 19 Using the sound control memory 20 Storing your own sound adjustments 21 About the demonstration mode DEMO MODE When shipped from the factory DEMO MODE is set to DEMO ON in this unit The demonstration will start automatically if no sound comes in for 3 minutes See page 25 To activate the display demonstration manually While holding DISP press A gt until DEMO appears on the display Various functions and display illumination modes equipped with this unit will be demonstrated repeatedly in sequence During the display demonstration DE
35. or treble Note Normally the control dial works for volume adjustment So you do not have to select VOLUME to adjust the volume level 19 a5 2 0 Z m 20 What is BBE The BBE function restores the brilliance and clarity of the original live sound in recording broadcasts etc When a speaker reproduces sound it introduces frequency dependent phase shifting causing high frequency sounds to take longer to reach the ear than low frequency sounds The BBE function adjusts the phase relationship between the low mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies so that all frequencies reach the listener s ears at the proper time In addition the BBE function boosts low and high frequencies which loudspeakers tend to be less efficient in reproducing through dynamic program driven augmentation When combined with the phase compensation feature the resulting sound has a clearer more finely detailed live presence As you turn the control dial the BBE function changes as follows gt BBE 1 lt gt BBE 2 lt gt BBE 3 e BBE OFF lt Canceled ER BBE gt BBE gt BBE 1 2 3 Canceled OFF As the number gets higher the BBE function becomes stronger When shipped from the factory the BBE function is set to BBE 2 To cancel the BBE function select BBE OFF
36. second Fast forwards or reverses the track if pressed and held while listening to a CD Bu n Skips to the beginning of the next track or goes Turns off the unit if pressed and held until SEE back to the beginning of the current or YOU appears on the display previous track if pressed briefly while listening Drops the volume level for a moment if pressed to a CD briefly Press again to resume the volume 2 Functions as the BAND button while listening to the radio or the DAB tuner Each time you press the button the band changes e Functions as the DISC button while listening to the CD changer Each time you press the button the disc number increases and the selected disc starts playing e Does not function as the PROG button w Remote controller x 0 sl Z H gt a 1 Turns on the unit if pressed when the unit is turned off amp Preparing the remote controller Before using the remote controller e Aim the remote controller directly at the remote sensor on the main unit Make sure there is no obstacle in between a5 GU 0 Z m Remote sensor Do not expose the remote sensor to strong light direct sunlight or artificial lighting Installing the battery When the controllable range or effectiveness of the remote
37. the PSM items appears on the display 2 Press A PPI or dd v to select AUTO ADJ 3 Turn the control dial to select ADJ OFF Now automatic clock adjustment is canceled 4 Press SEL select to finish the setting To reactivate clock adjustment repeat the same procedure and select ADJ ON in step 3 Note You must stay tuned to the same station for more than 2 minutes after setting AUTO ADJ to ADJ ON Otherwise the clock time will not be adjusted This is because the unit takes up to 2 minutes to capture the CT data in the RDS signal x 0 l O Z H 15 CD OPERATIONS ENGLISH emm N Le dee wa d Playing a CD 1 Open the loading slot The display panel moves down and the loading slot appears 2 Insert a disc into the loading slot The unit draws ina CD the display panel moves up and CD play starts automatically The CD indicator lights up Total track number of the inserted disc Total playing time of the inserted disc 1 Current track Elapsed playing time 16 Notes When a CD is in the loading slot selecting CD as the source by pressing SOURCE starts CD play e When a CD is inserted upside down the CD automatically ejects CD EJECT appears on the display e When you play a CD Text the disc title and
38. the current sound mode setting see page 20 is shown on the upper part of the display fan external source is selected the current sound mode setting is shown on the lower part of the display To select the level meter LEVEL METER You can select the level meter display according to your preference When shipped from the factory NORMAL is selected e NORMAL Normal audio level meter illuminates from bottom to top Level meter illuminates as if it were reflected on a mirror Volume level meter stays lit and does not change its illumination Level meter turns off MIRROR LEVEL OFF ALL OFF To select the dimmer mode DIMMER MODE When you turn on the car headlights the display automatically dims Auto Dimmer When shipped from the factory Auto Dimmer mode is activated e DIMMER AUTO Activates Auto Dimmer e DIMMER OFF Cancels Auto Dimmer e DIMMER ON Always dims the display Note on Auto Dimmer Auto Dimmer equipped with this unit may not work correctly on some vehicles particularly on those having a control dial for dimming In this case set the dimmer mode to DIMMER ON or DIMMER OFF To select the telephone muting TELEPHONE This mode is used when a cellular phone system is connected Depending on the phone system used select either MUTING 1 or MUTING 2 whichever mutes the sounds from this unit When shipped from the factory this mode is d
39. this if this setting can mute the sounds e MUTING OFF Cancels the telephone muting To turn on off the key touch tone BEEP SW You can deactivate the key touch tone if you do not want it to beep each time you press a button When shipped from the factory the key touch tone is activated BEEP ON e BEEP OFF Activates the key touch tone Deactivates the key touch tone To select the scroll mode SCROLL You can select the scroll mode for the disc information if it consists of more than 10 characters When shipped from the factory Auto Scroll mode is set to ONCE e ONCE Scrolls only once e AUTO Repeats the scroll in 5 second intervals OFF Cancels Auto Scroll Note Even if the scroll mode is set to OFF you can scroll the display by pressing DISP for more than 1 second To select the external component to use EXT INPUT You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS U57 not supplied To use the external component as the playback source through this unit you need to select which component CD changer or external component to use When shipped from the factory CHANGER is selected as the external component e CHANGER To use the CD changer e LINE INPUT To use the external component other than the CD changer To make the front panel look flat hiding the control panel FLAT PANEL When operati
40. want Each time you press the button the sound mode changes as follows we BEAT SCM SOFT SCM OFF SCM POP e When SCM LINK is set to LINK ON the selected sound mode can be stored in memory for the current source and the effect applies only to the current source Each time you change the playback source the SCM indicator flashes on the display When SCM LINK is set to LINK OFF the selected sound mode effect applies to any source Indication For Preset values Bass Treble BBE SCM BEAT Rock or disco 02 00 2 music SCM SOFT Quiet 01 03 OFF background music SCM POP Light music 04 01 OFF SCM OFF Flat sound 00 00 2 Recalling the sound modes When SCM LINK is set to LINK ON select the source T The sound mode stored in memory for the selected source is recalled Notes You can adjust each sound mode to your preference and store it in memory If you want to adjust and store your original sound mode see Storing your own sound adjustments on the right column To adjust the bass and treble reinforcement levels or the BBE function temporarily see pages 19 and 20 Your adjustments will be canceled if another source is selected Storing your own sound adjustments You can adjust the sound modes SCM BEAT SCM SOFT SCM POP to your preference and store your own adjustments in memory
41. 01 10 CONTRAST 05 25 SCROLL MODE Scroll mode en ei al SCROLL ONCE 25 WOOFER FREQ Subwoofer cutoff FREQ LOW gt FREQ MID frequency 1 FREQHIGH ee LINE ADJ Line input level adjustment LINE ADJ 00 05 LINE ADJ 00 25 FLAT PANEL Flat panel FLAT OFF FLATON FLAT OFF 25 IF FILTER Intermediate frequency filter WIDE AUTO AUTO 26 DEMO MODE Demo mode DEMO OFF DEMO ON DEMO ON 26 4 Press SEL select to finish the setting Ka Displayed only when the DAB tuner is connected When you select CRUISE 1 or CRUISE 2 for Audio Cruise Mode you can adjust these items I 0 l Z H 23 a5 H 0 2 H 24 WE To cancel Advanced SCM SCH LINK You can cancel the Advanced SCM Sound Control Memory and unlink the sound modes and the playback sources When shipped from the factory a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources e SCM LINK ON Advanced SCM different sound modes for different sources e SCM LINK OFF Conventional SCM one sound mode for all sources To set the clock display CLOCK DISP You can set the clock to be shown on the lower part of the display when the unit is turned on When shipped from the factory the clock is set to be shown on the display e CLK DISP ON Clock display is turned on e CLK DISP OFF Clock display is turned off When CLK DISP OFF is selected
42. 05 Sluitring 85 Lock nut M5 Ecrou d arr t M5 Contra moer M5 Sleeve Trim plate Handles Halterung Frontrahmen Griffe Manchon Plaque d assemblage Poign es Huis Sierplaat Hendels Sicherungsmutter M5 ee Teileliste f r den Einbau und Anschlu Die folgenden Teile werden zusammen mit diesem Ger t geliefert Nach ihrer berpr fung die Teile richtig einsetzen Mounting bolt M5 x 20 mm Befestigungsschraube M5 x 20 mm y Boulon de montage M5 x 20 mm Bevestigingsbout M5 x 20 mm D Sr Liste des pieces pour l installation et raccordement Les pieces suivantes sont fournies avec cet appareil Apr s v rification veuillez les placer correctement Power cord Stromkable Cordon d alimentation Stroomkabel Rubber cushion Gummipuffer Amortisseur en caoutchouc ar Rubberdop Lijst van onderdelen die u bij installatie en aansluiting nodig hebt De volgende onderdelen worden bij het apparaat geleverd Installeer ze op de juiste wijze nadat u ze hebt gecontroleerd Remote controller DS Battery Fernbedienung 5 Batterie T l commande H Pile gt Afstandsbediening Batterij CR2025 For KD LX330R only Nur f r den KD LX330R Pour le KD LX330R seulement Alleen voor KD LX330R ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHL SSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN To prevent short circuits we recommend that you disconnect the battery s nega
43. 330R F R DEN KD LX330R POUR LE KD LX330R VOOR KD LX330R Signal cord not supplied with this unit Einzelleitung nicht mit diesem Ger t mitgeliefert Cordon de signal non fourni avec cet appareil Signaalkabel niet meegeleverd Source equipment Cle Externes Ger t KD LX330R i Appareil source Ce D Andere apparaat LINE IN Signal cord not supplied with this unit Subwoofer Einzelleitung nicht mit diesem Ger t mitgeliefert Subwoofer Cordon de signal non fourni avec cet appareil Rn 98 grave ubwooter Signaalkabel niet meegeleverd Amplifier Verst ker CLJ rl SUBWOOFER OUT Amplificateur Versterker Line Input Adapter KS U57 niet meegeleverd KD LX110R CD changer jack Buchse f r CD Wechsler Prise du changeur CD Aansluiting voor CD wisselaar Signal cord not supplied with this unit External component Externe Komponente Appareil ext rieur Extern apparaat Einzelleitung nicht mit diesem Ger t mitgeliefert Cordon de signal non fourni avec cet appareil Signaalkabel niet meegeleverd
44. BASIC OPERATIONS E EE LEES Listening to the radio You can use either automatic searching or manual searching to tune into a particular station Searching a station automatically Auto search 1 Select the band 1 Press SOURCE to select FM or AM as the source J P If necessary press and Ge hold MODE BAND to select the FM band number FM1 FM2 or FM3 Each time you press and hold the button the FM band changes as follows Bi gt FM2 ad Selected band appears Note This receiver has three FM bands FMI FM2 FM3 You can use any one of them to listen to an FM broadcast 2 Start searching a station NE Press A ppl to search stations of higher frequencies Press la v to search LJ Stations of lower frequencies When a station is received searching stops To stop searching before a station is received press the same button you have pressed for searching To tune in FM stations only with strong signals 1 Press MODE BAND MODE appears on the lower part of the display and the number buttons can work as different function buttons 2 Press LOCAL while MODE is still on the display so that the LOCAL indicator lights up on the display This function works only while searching FM stations including SSM preset see page 9 Each time you press the button the LOCAL indicator lights up
45. FILTER In some areas adjacent stations may interfere with each other If this interference occurs noise may be heard This unit has been preset to automatically reduce this interference noise AUTO when shipped from the factory e AUTO When this type of interference occurs this unit automatically increases the tuner selectivity so that interference noise will be reduced But the stereo effect will also be lost Subject to the interference from adjacent stations but sound quality will not be degraded and the stereo effect will not be lost e WIDE To turn the demo mode on or off DEMO MODE You can turn the demo mode on or off When shipped from the factory DEMO ON is selected DEMO ON Turns the demo mode on The demonstration will start automatically if no sound comes in for 3 minutes DEMO OFF Turns the demo mode off Note Ifthe unit has been reset and the power is on demonstration will start if no sound comes in for about 10 seconds Controlling the volume automatically Audio Cruise You can select the proper cruise mode for your car This unit changes the volume level automatically at 3 possible levels based on the driving speed of your car by detecting the alternator s generating frequency Audio Cruise If you want to use this mode follow the procedure below When shipped from the factory this mode is set to CRUISE OFF e CRUISE 1 Select this if your car i
46. JVC MN ENGLISH SE I Hu CD RECEIVER CD RECEIVER a RECEPTEUR CD CD RECEIVER FRANCAIS KD LX330R NEDERLANDS COMPACT ml e aos pros BBE oo For installation and connections refer to the separate manual Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung Pour l installation et les raccordements se r f rer au manuel s par Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het toestel For Customer Use Enter below the password INSTRUCTIONS you have entered for your security lock E lie Retain this password for GEBRUIKSAANWIJZING EE easswonn III PIM164200 E a5 GU 0 Z m Position And Reproduction Of Labels Bottom panel of the main unit CAUTION Invisible laser ADVARSEL Usynlig laser VARNING Osynlig laser VARO Avattaessa ja radiation when open and str ling ved bning nar str lning n r denna del r suojalukitus ohitettaessa interlock failedor defeated sikkerhedsafbrydere er ude ppnad och sp rren rlolet alttiina n kym tt AVOID DIRECT EXPOSURE Jaf funktion ndg udseet urkopplad Betrakta ejlm lle lasers teilylle e telse for str ling d stralen s Al katso s teeseen f Name Rating plate IMPORTANT FOR LASER PRODUCTS Preca
47. MO flashes on the display To turn off the display demonstration press A Pl again for a few seconds while holding DISP e The display demonstration will turn off automatically after about 1 hour BEFORE USE For safety Temperature inside the car Do not raise the volume level too much as this will block outside sounds making driving dangerous e Stop the car before performing any complicated operations If you have parked the car for a long time in hot or cold weather wait until the temperature in the car becomes normal before operating the unit x 0 O Z H a5 H 0 Z m lt LOCATION OF THE BUTTONS Control panel CD loading slot Display panel 4 5 6 7 8 9 UO 11 12 13 14 15 The control panel slides out when you press ON CLOSE When you press OFF A button the display panel moves down and the CD loading slot appears Control dial SCM sound control memory button 2 AD gt I I44 v button MONO button e A Pei iaa also functions as ON or LOCAL button 7 8 9 CLOSE button ol INT intro button 1 2 3 4 Remote sensor RPT repeat button SEL select button RND random button DISP display button SOURCE button e Also f
48. O Z H 15 CD OPERATIONS ENGLISH fe Playing a CD Notes e When a CD is in the loading slot selecting CD as the source by pressing SOURCE starts CD play When a CD is inserted upside down the CD automatically ejects DISC EJECT appears on the display e When you play a CD Text the disc title and performer appear on the display Then the current track title appears on the display followed by the track number and elapsed playing time See also 1 Open the loading slot The display panel moves down and the Playing a CD Text page 18 and To select the loading slot appears scroll mode SCROLL MODE page 25 2 DE If a CD Text includes much text information some Insert a disc into the loading slot may not appear on the display The unit draws in a CD e Ifyou change the source CD play also stops the display panel without ejecting the CD moves up and CD play starts automatically To stop play and eject the CD Press OFF A briefly CD play stops the display panel moves down then the CD automatically ejects from the loading slot To move up the display panel press A gt gt I or lt lt vw If no button is pressed the display The CD indicator lights up panel will move up in about 5 minutes Total track number of Total playing time of the the inserted disc inserted disc L CAU
49. Preferred Setting Mode PSM items or I 2 3 l Factory preset See settings page Hold Select Counter G 5 clockwise Clockwise CLOCK HOUR Hour adjustment Back Advance de m CLOCK MINUTE Minute adjustment Back Advance SCM LINK De memory SCM LINK OFF SCM LINK ON SCMLINKON 24 CLOCK24H 12H 24 12 hour time display CLOCK 12HOUR CLOCK 24HOUR CLOCK 24HOUR 22 AUTO ADJUST Automatic clock setting ADJUST OFF ADJUST ON ADJUST ON 15 CLOCK DISP Clock display CLK DISP OFF CLK DISP ON CLKDISPON 24 TUNER DISP Tuner display FREQUENCY PS NAME PS NAME 15 PTY STANDBY PTY standby 29 programme types NEWS 13 PTY SEARCH PTY search See pages 13 and 40 NEWS 13 TA VOLUME Traffic announcement VOL 00 VOL 50 VOL 20 15 volume P SEARCH Programme search SEARCH OFF SEARCHON SEARCH OFF 14 DAB AF Alternative frequency AF OFF AF ON AF ON 39 search LEVEL METER Level display 4 types See page 24 NORMAL 24 DIMMER MODE Dimmer mode DIMMER AUTO gt DIMMER OFF DIMMER AUTO 24 1 DIMMERON CRUISE MODE Audio cruise CRUISE 1 CRUISE 2 t CRUISE OFF CRUISE OFF 26 OR RPM SET Idling speed 800 rpm 27 BOOST Boost BOOST 01 15 BOOST 05 27 TELEPHONE Telephone muting MUTING 1 MUTING 2 MUTING OFF 24 L MUTING OFF T BEEP SWITCH Key touch tone BEEP OFF BEEP ON BEEP ON 24 CONTRAST Display contrast CONTRAST
50. Q LOW Frequencies higher than 50 Hz are cut off to the subwoofer Frequencies higher than 80 Hz are cut off to the subwoofer Frequencies higher than 120 Hz are cut off to the subwoofer FREQ MID e FREQ HIGH dor To adjust the line input level LINE ADJ Adjust the line input level properly when an external component is connected to the LINE IN plugs When shipped from the factory the line input level is set at level 00 If the input level of the connected component is not high enough increase the input level properly Without adjusting the line input level you may be surprised at a loud sound when you change from the external component to another source x 0 l Z H To make the front panel look flat hiding the control panel FLAT PANEL When operating the receiver using the remote control you can hide the control panel to make the front panel look flat When shipped from the factory FLAT OFF is selected e FLAT ON The control panel will not come out when you turn on the unit To use the control panel press L a w so that the control panel comes out If no operation is done for about 10 seconds it automatically goes back into the receiver You can use the control panel normally FLAT OFF Note When FLAT ON is selected you can eject a CD by holding 44 VW 25 a5 GU 0 Z m 26 AIF To change the FM tuner selectivity IF
51. SSM appears then disappears when automatic preset is over Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected FM1 FM2 or FM3 These stations are preset in the number buttons No 1 lowest frequency to No 6 highest frequency When automatic preset is over the station stored in number button 1 will be automatically tuned in W E Manual preset You can preset up to 6 stations in each band FM1 FM2 FM3 and AM manually Ex Storing an FM station of 88 3 MHz into the preset number 1 of the FM1 band a5 2 0 Z m 1 Select the band EMIL Press SOURCE to select FM as the source 2 Tune into a station of 88 3 MHz mw Press A gt e to tune into stations of higher frequencies Press and hold MODE BAND repeatedly to select the FM1 band Press L a V to tune into stations of lower frequencies ETH f 3 Press and hold the number button in this example 1 for more than 2 seconds SCM m4 Dr Pi 343 BBE Band number and MEMO appear ternately for a while Di 10 4 Repeat the above procedure to store other stations into other preset numbers Notes e A previously preset station is erased when a new station is stored in the same preset number e Preset stations are erased when the power supply to the memory circuit is interrupt
52. TION NEVER insert your finger between Current ACK Elapsed playing time the display panel and the unit as it may get caught in the unit Note If the ejected disc is not removed for about 15 seconds the disc is automatically inserted again into the loading slot to protect it from dust CD play will not start this time 16 Locating a track or a particular portion on a CD To fast forward or reverse the track Press and hold A pl while playing a CD to fast forward the track Press and hold tea w while playing a CD to reverse the track To go to the next tracks or the previous tracks ON aoe Press A Bl briefly while playing a CD to go ahead to the beginning of the next track KS Each time you press the button wo consecutively the beginning of the next tracks is located and played back Press ida w briefly while playing a CD to go back to the beginning of the current track Each time you press the button consecutively the beginning of the previous tracks is located and played back To go to a particular track directly DDO MONO LOCAL COE Press the number button corresponding to the track number to start its playback e To select a track number from 1 6 Press 1 7 6 12 briefly e To select a track number from 7 12 Press and hold 1 7 6 12 for more than 1 second Selecting CD playback modes To play back tracks at random Ran
53. aardkabel is verbonden met het chassis van de auto e De warmte opnemer kan na gebruik erg heet worden Raak de warmte opnemer niet aan wanneer u dit apparaat van zijn plaats haalt Connecting the leads AnschlieBen der Leitungen Raccordement des fils Aansluiting van de gekleurde draden Twist the core wires when connecting Die Kerndr hte beim AnschlieBen verdrehen Torsader les mes des fils en les raccordant Draai de kerndraden om elkaar heen wanneer u ze wilt aansluiten Solder the core wires to connect them securely Die Kerndr hte anl ten um sie fest anzuschlieBen Souder les mes des fils pour les raccorder entre eux de fa on s re Soldeer de kerndraden zodat ze stevig vast zitten avec de la bande isolante e Om kortsluiting te voorkomen moet u de aansluitklemmen van ONGEBRUIKTE CAUTION VORSICHT PRECAUTION LET OP e To prevent short circuit cover the terminals of the UNUSED leads with insulating tape Zur Vermeidung eines Kurzschlusses die Anschlu klemmen der NICHT VERWENDETEN Leitungen mit Isolierklebeband umwickeln Pour viter les court circuits couvrir les bornes des fils qui ne sont PAS utilis s gekleurde draden met isolatieband bedekken N ENGLISH DEUTSCH FRANCAIS For some VW Audi or Opel Vauxhall automobile F r manche VW Audi oder Opel Vauxhall Fahrzeuge Pour certaine voiture VW Audi ou Opel Vauxhall Voor bepaalde modellen VW Audi of Opel
54. akers des Mobiltelefons Andere zur Lautsprecher 3 Das Antennenkabel anschlie en 4 Die Kabelb ume am Ger t anschlie en 3 Connect the aerial cord 4 Finally connect the wiring harness to the unit 3 Sluit de antenne aan 4 Finalement connectez le faisceau de fils appareil A verbind de draadbundel daarna met het apparaat Cut the ISO connector Den ISO Stecker abscheiden Coupez le connecteur ISO Knip de connector los When connecting a CD changer we recommend to use one of the CH X series CD changers e If your CD changer is one of the KD MK series you need an optional cord KS U15K You can also use an external component such as a portable MD player by connecting the Line Input Adaptor KS U57 not supplied See diagram CD changer or another external component CD Wechsler oder eine andere To aerial externe Komponente SN 7 l g Ae Anais Changeur CD JVC Stee Re CD Wechsler anschlie en m chten empfiehlt es sich einen CD Wechsler der Modellreihe CH X zu a AU PE 4 antenne SE el IR e Wenn Ihr CD Wechsler zur Modellreihe KD MK geh ren ben tigen Sie ein anderes Kabel KS U15K Borne de l antenne En us OTA PAIN Sie k nnen auch eine externe Komponente z B einen tragbaren MD Spieler verwenden wenn Sie den nicht zum Aansluitpunt antenne 4 apparaat Lieferumfang geh renden Line Eingangsadapter KS U57 anschlie en Siehe Schaltplan Lors de la connexion d un c
55. al harmonic distortion Rear 19 W per channel into 4 Q 40 Hz to 20 000 Hz at no more than 0 8 total harmonic distortion Load Impedance 4 Q 4 Q to 8 Q allowance Tone Control Range Bass 10 dB at 100 Hz Treble 10 dB at 10 kHz Frequency Response 40 Hz to 20 000 Hz Signal to Noise Ratio 70 dB Line Out Level Impedance 2 0 V 20 kQ load full scale Output Impedance 1 KQ TUNER SECTION Frequency Range FM 87 5 MHz to 108 0 MHz AM MW 522 kHz to 1 620 kHz LW 144 kHz to 279 kHz FM Tuner Usable Sensitivity 11 3 dBf 1 0 uV 75 Q 50 dB Quieting Sensitivity 16 3 dBf 1 8 uV 75 Q Alternate Channel Selectivity 400 kHz 65 dB Frequency Response 40 Hz to 15 000 Hz Stereo Separation 30 dB Capture Ratio 1 5 dB MW Tuner Sensitivity 20 uV Selectivity 35 dB LW Tuner Sensitivity 50 uV SPECIFICATIONS CD PLAYER SECTION Type Compact disc player Signal Detection System Non contact optical pickup semiconductor laser Number of channels 2 channels stereo Frequency Response 5 Hz to 20 000 Hz Dynamic Range 96 dB Signal to Noise Ratio 98 dB Wow and Flutter Less than measurable limit x 0 O Z H GENERAL Power Requirement Operating Voltage DC 14 4 V 11 V to 16 V allowance Grounding System Negative ground Allowable Operating Temperature 0 C to 40 C Dimensions W x H x D Installation Size 182 mm x 52 mm x 160 mm Panel Size 188 mm x 58 mm x 8 mm Mass 1 7 kg
56. an use any of them to tune into an ensemble 3 Start searching an ensemble Press A gt to search ensembles of higher frequencies Press ld w to search ensembles of lower frequencies When an ensemble is received searching stops To stop searching before an ensemble is received press the same button you have pressed for searching 33 a5 H 0 Z m 34 mAB 4 Select a service you want to listen to Press MODE BAND MODE appears on the display 2 Press A gt ei oraa v to select a service you want while MODE is still on the display To change the display information while tuning into an ensemble Normally service name is shown on the display If you want to check the ensemble name or its frequency press DISP display Each time you press the button the following information appears for a while on the display Y Service name Y Ensemble name Y Channel number Y Frequency To tune in a particular ensemble without searching 1 Press SOURCE to select DAB tuner as the source 2 Press MODE BAND repeatedly to select the DAB band DAB1 DAB2 or DAB3 3 Press and hold A gt or L a v for more than 1 second 4 Press A ppl or L a wv repeatedly until the ensemble you want is reached e If you hold down the button the ensemble keeps changing until you release the button Storing DAB services in memory You can preset up to 6
57. at However they may not be played back depending on their characteristics or recording conditions Before playing back CD Rs or CD RWs read their instructions or cautions carefully Some CD Rs or CD RWs may not be played back on this unit because of their disc characteristics damage or stain on them or if the player s lens is dirty CD Rs or CD RWs are susceptible to high temperatures or high humidity so do not leave them inside your car CD RWs may require a longer readout time This is caused by the fact that the reflectance of CD RWs is lower than for regular CDs CAUTIONS e Do not insert 8 cm CDs single CDs into the loading slot Such CDs cannot be ejected Do not insert any CD of unusual shape like a heart or flower otherwise it will cause a malfunction Do not expose CDs to direct sunlight or any heat source or place them in a place subject to high temperature and humidity Do not leave them in a car e Do not use any solvent for example conventional record cleaner spray thinner benzine etc to clean CDs AUDIO AMPLIFIER SECTION Maximum Power Output Front 50 W per channel Rear 50 W per channel Continuous Power Output RMS Front 19 W per channel into 4 Q 40 Hz to 20 000 Hz at no more than 0 8 total harmonic distortion Rear 19 W per channel into 4 Q 40 Hz to 20 000 Hz at no more than 0 8 total harmonic distortion Load Impedance 4 Q 4 Q to 8 Q allowance Tone Con
58. ble 06 min 06 max FADER Adjust the front DOG Rear only and rear speaker balance F06 Front only BAL Adjust the left LO6 Left only balance and right speaker balance R06 Right only BBE See What is BBE on the OFF 1 2 3 next page VOLUME Adjust the volume 00 min 50 max Tf you are using a two speaker system set the fader level to 00 2 Adjust the level To increase the level x 0 O Z H To decrease the level Equalization pattern changes as you adjust the bass or treble Note Normally the control dial works for volume adjustment So you do not have to select VOLUME to adjust the volume level 19 a5 2 0 Z m 20 What is BBE The BBE function restores the brilliance and clarity of the original live sound in recording broadcasts etc When a speaker reproduces sound it introduces frequency dependent phase shifting causing high frequency sounds to take longer to reach the ear than low frequency sounds The BBE function adjusts the phase relationship between the low mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies so that all frequencies reach the listener s ears at the proper time In addition the BBE function boosts low and high frequencies which loudspeakers tend to be less efficient in reproducing through dynamic program
59. by the sudden increase in the output level Therefore lower the volume before playing a disc and adjust it as required during playback Thank you for purchasing a JVC product Please read all instructions carefully before operation to ensure your complete understanding and to obtain the best possible performance from the unit CONTENTS LOCATION OF THE BUTTONS 4 Gontrol panel u nennen 4 Remote controller AA 5 Preparing the remote controller 6 BASIC OPERATIONS 7 RADIO BASIC OPERATIONS 8 Listening to the radio 8 Storing stations in memory 9 Tuning into a preset station 10 RDS OPERATIONS 11 What you can do with RDS EON 11 Other convenient RDS functions and adjustments 14 CD OPERATIONS A 16 Playing a CD ssd este 16 Locating a track or a particular portion OM a CD ennen tendre 17 Selecting CD playback modes 17 Prohibiting CD ejection 18 Playing a CD Text nnen 18 SOUND ADJUSTMENTS 19 Adjusting the sound neen 19 Using the sound control memory 20 Storing your own sound adjustments 21 OTHER MAIN FUNCTIONS 22 Setting the ClOCK sars snserrversenaresn eesserven 22 Changing the general settings PSM 22 Controlling the volume automatically Audio Cruise nennen 26 Assigning names to the sources
60. c number Ex When disc number 3 is selected To show the CD Text information This is possible only when connecting a JVC CD automatic changer equipped with CD Text reading capability See Playing a CD Text on page 18 Selecting CD playback modes There is a time limit in doing the following procedure If the setting is cancelled before you finish start from step 1 again To play back tracks at random Random Play 1 Press MODE BAND while playing a CD MODE appears on the display O Within 2 Press RND random while MODE is still on the display so that the RND indicator lights up on the display Each time you press the button CD random play mode changes as follows RND _ _RND1 _ _RND _ Random1 Random2 Canceled lt _ ___ RND Mode Indicator Plays at random RND1 Lights All tracks of the current disc then the tracks of the next disc and so on RND2 Flashes All tracks of all discs inserted in the magazine To play back tracks repeatedly Repeat Play 1 Press MODE BAND while playing a CD MODE appears on the display Within 2 Press RPT repeat while MODE is still on the display so that the RPT indicator lights up on the display Each time you press the button CD repeat play mode changes as follows RPT RPT1 RPT2 _ Repeat Repeat2 Canceled lt _____ RPT Plays Mode In
61. can do the following Tracing the same programme automatically Network Tracking Reception Standby Reception of TA Traffic Announcement or your favourite programme e PTY Programme Type search e Programme search e And some other functions Tracing the same programme automatically Network Tracking Reception When driving in an area where FM reception is not good the tuner built in this unit automatically tunes into another RDS station broadcasting the same programme with stronger signals So you can continue to listen to the same programme in its finest reception no matter where you drive See the illustration on the next page Two types of the RDS data are used to make Network Tracking Reception work correctly PI Programme Identification and AF Alternative Frequency Without receiving these data correctly from the RDS station you are listening to Network Tracking Reception will not operate RDS OPERATIONS A To use Network Tracking Reception press and hold TP RDS traffic programme radio data system for more than 1 second Each time you press and hold the button Network Tracking Reception modes change as follows N gt Mode 1 Mode 2 Mode 3 AF indicator REG indicator Mode 1 The AF indicator lights up but the REG indicator does not Network Tracking Reception is activated with Regionalization set to off Switches to another station within the same n
62. connected components e Standby Reception will not work if you are listening to an AM station TA Standby Reception When you press TP RDS while O listening to an FM station the TP indicator is lit during reception of a TP Traffic Programme station and the TA standby mode is engaged e When the station being received is not a TP station the TP indicator flashes Press A Pei oraa w to engage the TA standby mode SEARCH appears on the display and TP station search starts When a TP station is tuned in the TP indicator is lit ml you are listening to a CD or other connected components and wish to listen to a TP station press TP RDS to enter the TA standby mode The TP indicator lights up If a traffic programme starts broadcasting while the TA standby mode is active TRAFFIC appears and the playback source changes to the FM band The volume increases to the preset TA volume level see page 15 and the traffic programme can be heard To deactivate the TA standby mode press TP RDS again PTY Standby Reception When you press PTY while listening to an FM station the PTY indicator is lit during reception of a PTY station and the PTY standby mode is engaged The selected PTY name stored on page 13 flashes for 5 seconds When the station being received is not a PTY station the PTY indicator flashes Press A Fb ora WY to engage the PTY standby mode SEARCH appears on the display and PTY statio
63. controller Before using the remote controller e Aim the remote controller directly at the remote sensor on the main unit Make sure there is no obstacle in between a5 GU 0 Z m Remote sensor Do not expose the remote sensor to strong light direct sunlight or artificial lighting Installing the battery When the controllable range or effectiveness of the remote controller decreases replace the battery 1 Remove the battery holder 1 Push out the battery holder in the direction indicated by the arrow using a ball point pen or a similar tool 2 Remove the battery holder 2 Place the battery Slide the battery into the holder with the side facing upwards so that the battery is fixed in the holder L i Lithium coin battery product number CR2025 gt d 3 Return the battery holder Insert again the battery holder pushing it until you hear a clicking sound back side WARNING Store the batteries in a place which children cannot reach If a child accidentally swallows the batteries immediately consult a doctor Do not recharge short disassemble or heat the batteries or dispose of in a fire Doing any of these things may cause the batteries to give off heat crack or start a fire Do not leave the batteries with other metallic materials Doing this may cause the batteries to give off heat crack or start a fire When throwing away or saving batte
64. controller decreases replace the battery 1 Remove the battery holder 1 Push out the battery holder in the direction indicated by the arrow using a ball point pen or a similar tool 2 Remove the battery holder 2 Place the battery Slide the battery into the holder with the side facing upwards so that the battery is fixed in the holder L i Lithium coin battery product number CR2025 gt d 3 Return the battery holder Insert again the battery holder pushing it until you hear a clicking sound back side WARNING Store the batteries in a place which children cannot reach If a child accidentally swallows the batteries immediately consult a doctor Do not recharge short disassemble or heat the batteries or dispose of in a fire Doing any of these things may cause the batteries to give off heat crack or start a fire Do not leave the batteries with other metallic materials Doing this may cause the batteries to give off heat crack or start a fire When throwing away or saving batteries wrap in tape and insulate otherwise it may cause the batteries to give off heat crack or start a fire Do not poke the batteries with tweezers or similar tools Doing this may cause the batteries to give off heat crack or start a fire BASIC OPERATIONS 2 1 Turn on the power The display illuminates and the control panel a
65. dicator repeatedly RPT1 Lights The current track or specified track RPT2 Flashes All tracks of the current disc or specified disc To play back only intros Intro Scan 1 Press MODE BAND while playing a CD MODE appears on the display Within 5 seconds ba CU 0 H 2 Press INT intro while MODE is still on the display Each time you press the button CD intro scan mode changes as follows INT A INT1 INT2 gt Intro1 gt Intro2 Canceled Plays the Mode Indication beginnings 15 seconds INT1 Track number Of all tracks on all flashes inserted discs INT2 Disc number Of the first track on flashes when it is shown on the display each inserted disc 31 EXTERNAL COMPONENT OPERATIONS a5 2 0 Z m Playing an external component 1 Select the external component Casen Each time you press the You can connect the external component to the CD We button the source changes changer jack on the rear using the Line Input as described on page 7 Adaptor KS U57 not supplied Preparations e For connecting the Line Input Adaptor KS U57 and the external component refer to the Installation Connection Manual separate volume e Before operating the external component using the 2 Operate the external component following procedure select the external input correctly
66. djustments will also be erased Note For security reasons a numbered ID card is provided with this unit and the same ID number is imprinted on the unit s chassis Keep the card in a safe place as it will help the authorities to identify your unit if stolen CAUTION on Volume Setting CDs produce very little noise compared with other sources If the volume level is adjusted for the tuner for example the speakers may be damaged by the sudden increase in the output level Therefore lower the volume before playing a disc and adjust it as required during playback Thank you for purchasing a JVC product Please read all instructions carefully before operation to ensure your complete understanding and to obtain the best possible performance from the unit CONTENTS LOCATION OF THE BUTTONS 4 OTHER MAIN FUNCTIONS 22 Control panel area 4 Setting the ClOEK rsr teneren erven 22 Remote controller With an optionally Changing the general settings PSM 22 purchased remote controller 5 Assigning names to CDs 26 Preparing the remote controller 6 Using the security lock 27 BASIC OPERATIONS 7 CD CHANGER OPERATIONS 29 Playing CDS u a 29 RADIO BASIC OPERATIONS 8 Selecting CD playback modes 30 Listening to the radio 8 Storing stations in memory 9 EXTERNAL COMPONENT OPERATIONS 32 Tuning
67. dom Play You can play back all tracks on the CD at random x 0 sl Z H 1 Press MODE BAND while playing a CD MODE appears on the lower part of the display and the number buttons can work as different function buttons 2 Press RND random while MODE is still on the display so that the RND indicator lights up on the display Each time you press the button CD random play mode turns on and off alternately The RND indicator When the random mode is turned on the RND indicator lights up on the display and a track randomly selected starts playing To play back tracks repeatedly Repeat Play You can play back the current track repeatedly 1 Press MODE BAND while playing a CD MODE appears on the lower part of the display and the number buttons can work as different function buttons 2 Press RPT repeat while MODE is still on the display so that the RPT indicator lights up on the display Each time you press the button CD repeat play mode turns on and off alternately Track number of the currently playing track The RPT indicator When the repeat mode is turned on the RPT indicator lights up on the display 17 a5 2 0 2 H 18 To play back only intros Intro Scan You can play back the first 15 seconds of each track sequentially 1 Press MODE BAND while playing a CD MODE appears on the lower part of the display and the numbe
68. e ISO Stecker Connexions sans l utilisation des connecteurs ISO Verbindingen zonder ISO connectoren Before connecting Check the wiring in the vehicle Vor dem Anschlie en Die Verdrahtung im Fahrzeug Avant de commencer la connexion Verifiez Alvorens de verbindingen tot stand te brengen carefully Incorrect connection may cause serious damage sorgf ltig berpr fen Falsche Anschl sse k nnen attentivement le c blage du v hicule Une connexion Moet u de bedrading in de auto zorgvuldig Het apparaat to this unit ernsthafte Sch den am Ger t hervorrufen incorrecte peut endommager s rieusement l appareil kan door verkeerde verbindingen ernstige schade oplopen 1 Cut the ISO connector 1 Den ISO Stecker abschneiden 1 Knip de ISO connector los 2 Connect the colored leads of the power cord to the car 2 Die farbigen Leitungen des 2 Sluit de gekleurde snoerdraden van de stroomkable in 1 Coupez le connecteur ISO 2 Connectez les fils de couleur du cordon d alimentation battery speakers and power aerial if any in the following sequence Black ground Yellow to car battery constant 12 V Red to an accessory terminal Blue with white stripe to power aerial 200 mA max Orange with white stripe to car light control switch Brown to cellular phone system For details refer to the instructions of the cellular phone Others to speakers Spannunsgversorgungskabels an der Autobatterie den Lautsprechern
69. e There is a time limit in doing the following procedure If the setting is canceled before you finish start from step 1 again 1 Press MODE BAND The number buttons can work as different function buttons 2 Select the sound mode you want Within sch For details see page 20 x 3 1 Select the item you want to adjust BASS TREBLE or BBE Adjust the selected item N ze Repeat step 3 to adjust the other items A Press MODE BAND 5 Press and hold SCM until the sound mode you have selected flashes on the display EN 6 Repeat the same procedure to adjust other sound modes To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on the left column d Your adjustment made for the selected sound mode is stored in memory 21 amr OTHER MAIN FUNCTIONS Setting the clock Changing the general settings 1 Press and hold SEL select for more than 2 seconds so that one of You can change the items listed on the next page the PSM items appears on the by using the PSM Preferred Setting Mode control display See page 23 EE 2 0 2 H Basic Procedure Mr 1 Press and hold SEL select for more than 2 seconds so that one of the 2 Set the hour PSM items appears on the display 1 Select CLOCK HOUR if not shown on See page 23 the display Adjust the hour 1 cuosel 2
70. e attention de ne pas le toucher en retirant cet appareil Om kortsluiting te voorkomen adviseren wij u om de minpool van de accu los te maken en alle elektrische verbindingen tot stand te brengen voordat u het apparaat in de auto installeert Als u niet zeker weet hoe u dit apparaat moet installeren kunt u dit beter door een daartoe gekwalificeerde technicus laten doen Opmerking Dit apparaat mag worden gebruikt bij elektrische systemen die werken op 12 V gelijkstroom met negatieve aarding Als uw auto niet is uitgerust met een dergelijk systeem is een spanningsomzetter vereist Dit instrument kan worden aangeschaft bij JVC car audio dealers e Vervang de zekering door een exemplaar met het aangegeven vermogen Als de zekering vaak doorslaat moet u uw JVC car audio dealer raadplegen e Als u geluidsproblemen hebt De krachtschakeling van dit apparaat heeft een ingebouwd geluidsfilter In sommige voertuigen zijn tikgeluiden of andere ongewenste geluiden te horen Als dit gebeurt moet u de massaklem aan de achterkant zie aansluitingsschema aan het chassis van de auto vastmaken met behulp van een kortere en dikkere kabel zoals kopermanteldraad of tellerkabel Als het geluid niet verdwijnt moet u contact opnemen met uw JVC car audio dealer e Het maximum ingangsvermogen van de speakers moet achterin niet meer dan 50 W zijn en voorin 50 W met een impedantie van 4 Q tot 8 Q e Zorg ervoor dat dit apparaat door middel van een
71. e display 2 Press A PPI or aa v to select DAB AF alternative frequency 3 Turn the control dial to select the desired mode AF ON Traces the program among DAB services and FM RDS stations Alternative Reception The AF indicator lights up on the display see page 11 e AF OFF Deactivates Alternative Reception Note When Alternative Reception for DAB services is activated Network Tracking Reception for RDS stations see page 11 is also activated automatically On the other hand Network Tracking Reception cannot be deactivated without deactivating Alternative Reception 4 Press SEL select to finish the setting ADDITIONAL INFORMATION PTY codes NEWS News AFFAIRS Topical programmes expanding on current news or affairs INFO Programmes which impart advice on a wide variety of topics SPORT Sport events EDUCATE Educational programmes DRAMA Radio plays CULTURE Programmes on national or regional culture SCIENCE Programmes on natural science and technology VARIED Other programmes like comedies or ceremonies POP M Pop music ROCK M Rock music EASY M Easy listening music LIGHT M Light music CLASSICS Classical music OTHER M Other music WEATHER Weather information FINANCE Reports on commerce trading the Stock Market etc CHILDREN Entertainment programmes for children SOCIAL Programmes on social activities RELIGION Programmes dealing with any aspect of belief o
72. e of the CH X series with your unit If you have another CD automatic changer consult your JVC IN CAR ENTERTAINMENT dealer for connections e For example if your CD automatic changer is one of the KD MK series you need a cord KS UI5K for connecting it to this unit Before operating your CD automatic changer e Refer also to the Instructions supplied with your CD changer If no discs are in the magazine of the CD changer or the discs are inserted upside down NO DISC will appear on the display If this happens remove the magazine and set the discs correctly If RESET 1 RESET 8 appears on the display something is wrong with the connection between this unit and the CD changer If this happens check the connection connect the connecting cord s firmly if necessary then press the reset button of the CD changer Playing CDs Select the CD automatic changer Re Each time you press the button the source changes as described on page 7 Playback starts from the first track of the first disc All tracks of all discs are played back Track number Elapsed playing time Disc number appears To fast forward or reverse the track Press and hold A gt while playing a CD to fast forward the track Press and hold aa v while playing a CD to reverse the track Press A PPI briefly while playing a CD to go ahead to the beginning of the next track Each time you pres
73. e of the PSM items appears on the display 2 Press A ppl or L a V to select P Programme SEARCH 3 Turn the control dial to select SEARCH ON Now programme search is activated 4 Press SEL select to finish the setting To cancel programme search repeat the same procedure and select SEARCH OFF in step 3 by turning the control dial counterclockwise Changing the display mode while listening to an FM station You can change the initial indication on the display to either station name PS NAME or to station frequency FREQUENCY while listening to an FM RDS station See also Changing the general settings PSM on page 22 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press A ppl or ld v to select TUNER DISP tuner display 3 Turn the control dial to set to the desired indication PS NAME or FREQUENCY 4 Press SEL select to finish the setting Note By pressing DISP you can also change the display while listening to an FM RDS station Each time you press the button the following information appears on the display Y Station name PS NAME Y Station Frequency FREQUENCY Y Programme type PTY e Then the display goes back to the original indication in several seconds Setting the TA volume level You can preset the volume level for TA Standby Reception When a traffic pr
74. e page 20 is shown on the upper part of the display If an external source is selected the current sound mode setting is shown on the lower part of the display To select the level meter LEVEL You can select the level meter display according to your preference When shipped from the factory NORMAL is selected e NORMAL Normal audio level meter illuminates from bottom to top MIRROR Volume level meter illuminates as if it were reflected on a mirror e LEVEL OFF Level meter stays lit and does not change its illumination ALL OFF Level meter turns off To select the dimmer mode DIMMER When you turn on the car headlights the display automatically dims Auto Dimmer When shipped from the factory Auto Dimmer is activated e AUTO Activates Auto Dimmer e OFF Cancels Auto Dimmer s ON Always dims the display Note on Auto Dimmer Auto Dimmer equipped with this unit may not work correctly on some vehicles particularly on those having a control dial for dimming In this case set the dimmer mode to ON or OFF To select the telephone muting TELEPHONE This mode is used when a cellular phone system is connected Depending on the phone system used select either MUTING 1 or MUTING 2 whichever mutes the sounds from this unit When shipped from the factory this mode is deactivated e MUTING 1 Select this if this setting can mute the sounds e MUTING 2 Select
75. eactivated e MUTING 1 Select this if this setting can mute the sounds e MUTING 2 Select this if this setting can mute the sounds e MUTING OFF Cancels the telephone muting To turn on off the key touch tone BEEP SWITCH You can deactivate the key touch tone if you do not want it to beep each time you press a button When shipped from the factory the key touch tone is activated e BEEP ON BEEP OFF Activates the key touch tone Deactivates the key touch tone To adjust the display contrast level CONTRAST You can adjust the display contrast level among 01 dark to 10 bright When shipped from the factory the display contrast level is set at level 05 To select the scroll mode SCROLL MODE You can select the scroll mode for the disc information if it consists of more than 12 characters When shipped from the factory Auto Scroll mode is set to SCROLL ONCE e SCROLL ONCE Scrolls only once e SCROLL AUTO Repeats the scroll in 5 second intervals e SCROLL OFF Cancels Auto Scroll Note Even if the scroll mode is set to SCROLL OFE you can scroll the display by pressing DISP for more than 1 second To select the subwoofer cutoff frequency WOOFER FREQ When a subwoofer is connected to this unit select an appropriate cutoff frequency level for your subwoofer When shipped from the factory the subwoofer cutoff frequency is set to FREQ MID e FRE
76. ed for example during battery replacement If this occurs preset the stations again Tuning into a preset station You can easily tune into a preset station Remember that you must store stations first If you have not stored them yet see Storing stations in memory on pages 9 and 10 1 Select the band Press SOURCE to select Ke FM or AM as the source N If necessary press and EN hold MODE BAND to select the FM band number FM1 FM2 or FM3 Each time you press and hold the button the FM band changes as follows Bee gt FM2 en 2 Select the number 1 6 for the preset station you want a w OOE scm MONO LOCAL P If the sound quality decreases and the stereo effect is lost while listening to an FM station In some areas adjacent stations may interfere with each other If this interference occurs this unit can automatically reduce this interference noise the initial setting when shipped from the factory However in this case the sound quality will be degraded and the stereo effect will be also lost If you do not want to degrade the sound quality and to lose the stereo effect rather than to eliminate the interference noise see To change the FM tuner selectivity IF FILTER on page 25 What you can do with RDS EON RDS Radio Data System allows FM stations to send an additional signal along with their regular programme signals For example
77. ed in Fig 1 and Fig 2 below DO NOT connect the unit using that original speaker wiring If you do the unit will be seriously damaged Redo the speaker wiring so that you can connect the unit to the speakers as illustrated in Fig 3 If the speaker wiring in your car is as illustrated in Fig 3 you can connect the unit using the original speaker wiring in your car If you are not sure of the speaker wiring of your car consult your JVC IN CAR ENTERTAINMENT dealer an der Autobatterie anschlie en da sonst das Ger t schwer besch digt wird Die schwarze Leitung Erdung die gelbe Leitung zur Autobatterie konstant 12 V und die rote Leitung zur Zubeh ranschlu klemme richtig anschlie en VOR dem Anschlie en der Lautsprecherleitungen des Spannunsgversorgungskabels an die Lautsprecher die Lautsprecherverdrahtung in Ihrem Auto berpr fen Ist die Lautsprecherverdrahtung wie unten in Fig 1 und Fig 2 abgebildet das Ger t NICHT mit der Originalverdrahtung der Lautsprecher anschlie en da sonst das Ger t schwer besch digt wird Die Lautsprecherverdrahtung erneuern so da Sie das Ger t an den Lautsprechern wie in Fig 3 abgebildet anschlie en k nnen Ist die Lautsprecherverdrahtung in Ihrem Auto wie in Fig 3 abgebildet k nnen Sie das Ger t mit der Originalverdrahtung der Lautsprecher in Ihrem Auto anschlie en Sind Sie sich ber die Lautsprecherverdrahtung in
78. ed flashes on the display Your adjustment made for the selected sound mode is stored in memory 4 6 Repeat the same procedure to adjust other sound modes To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on the left column x 0 O Z H 21 wer OTHER MAIN FUNCTIONS Setting the clock Changing the general settings PSM 1 Press and hold SEL select for more than 2 seconds so that one of You can change the items listed on the next page the PSM items appears on the by using the PSM Preferred Setting Mode control display See page 23 an Basic Procedure O 1 Press and hold SEL select for more than 2 seconds so that one of the 2 set the hour PSM items appears on the display Select CLOCK HOUR if not shown on See page 23 the display Adjust the hour IN 1 E 2 Select a PSM item you want to adjust See page 23 a5 2 0 Z m N 3 Set the minute Select CLOCK MINUTE Adjust the minute P 1 4 Set the clock system Select CLOCK 24H 12H Adjust CLOCK 24HOUR or CLOCK 4 12HOUR 1 Repeat steps 2 and 3 to adjust the other PSM items if necessary 5 Press SEL select to finish the setting 5 Press SEL select to finish the setting KS 22
79. ent Digital Audio Broadcasting aan te sluiten e Zie de instructies van deze apparaten voor meer informatie over het tot stand brengen van deze aansluiting Connecting cord supplied with your DAB tuner or CD changer Verbindungskabel das zum Lieferumfang des DAB Tuners oder CD Wechslers geh rt Cordon de connexion fourni avec votre tuner DAB ou changeur CD Verbindingskabel die met de DAB tuner of CD wisselaar wordt meegeleverd KD LX330R KD LX110R JVC DAB tuner DAB Tuner von JVC Tuner DAB JVC JVC DAB tuner or JVC CD changer oder CD Wechsler von JVC ou Changeur CD JVC of JVC CD wisselaar das Ger t ausgeschaltet ist aansluit CAUTION VORSICHT PRECAUTION LET OP Before connecting the CD changer and or the DAB tuner make sure that the unit is turned off e Bevor Sie den CD Wechsler und oder den DAB Tuner anschlie en vergewissern Sie sich da e Avant de connecter le changeur CD et ou le tuner DAB s assurer que l unit est teinte e Zorg ervoor dat de apparaat is uitgeschakeld alvorens u de en of DAB tuner CD wisselaar External component Externe Komponente Appareil ext rieur Extern apparaat FOR KD LX110R F R DEN KD LX110R POUR LE KD LX110R VOOR KD LX110R Line Input Adaptor KS U57 not supplied with this unit Line Eingangsadapter KS U57 nicht mit diesem Ger t mitgeliefert Adaptateur d entree de ligne KS U57 non fourni avec cet appareil FOR KD LX
80. ent function buttons 2 Press RPT repeat while MODE is still on the display so that the RPT indicator lights up on the display Each time you press the button CD repeat play mode turns on and off alternately Track number of the currently playing track The RPT indicator When the repeat mode is turned on the RPT indicator lights up on the display x 0 Z H 17 a5 GU 0 Z m 18 To play back only intros Intro Scan You can play back the first 15 seconds of each track sequentially 1 Press MODE BAND while playing a CD MODE appears on the lower part of the display and the number buttons can work as different function buttons 2 Press INT intro while MODE is still on the display Each time you press the button CD intro scan mode turns on and off alternately Track number of the currently playing track When the intro scan mode is turned on INT appears on the display for 5 seconds and the track number flashes Prohibiting CD ejection Playing a CD Text You can prohibit CD ejection and can lock a CD in the loading slot While pressing SOURCE press and hold OFF amp for more than 2 seconds NO EJECT flashes on the display for about 5 seconds and the CD is locked and cannot be ejected Note If you press OFF A while CD ejection is prohibited the control panel moves down but the CD cannot be ejected NO
81. ers 2 Select the number 1 6 for the Notes preset DAB service you want e A previously preset DAB service is erased when a new MONO LOCAL INT DAB service is stored in the same preset number e GD Preset DAB services are erased when the power supply to the memory circuit is interrupted for example during battery replacement If this occurs preset the DAB services again 35 a5 H 0 2 H 36 PAB What you can do more with DAB Tracing the same program automatically Alternative Reception You can keep listening to the same program While receiving a DAB service When driving in an area where a service cannot be received this unit automatically tunes in another ensemble or FM RDS station broadcasting the same program While receiving an FM RDS station When driving in an area where a DAB service is broadcasting the same program as the FM RDS station is broadcasting this unit automatically tunes into the DAB service Note When reception switches between DAB and FM the l istening volume level may increase or decrease inconveniently This change in the volume level results from unequal audio injection levels at broadcaster site but not from the malfunction of this unit To use Alternative Reception When shipped from the factory Alternative Reception is activated 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on th
82. etwork when the receiving signals from the current station become weak In this mode the programme may differ from the one currently received Mode 2 Both the AF indicator and the REG indicator light up Network Tracking Reception is activated with Regionalization set to on Switches to another station within the same network broadcasting the same programme when the receiving signals from the current station become weak Mode 3 Neither the AF indicator nor the REG indicator lights up Network Tracking Reception is deactivated Note If a DAB tuner is connected and Alternative Reception for DAB services is activated Network Tracking Reception is also activated automatically On the other hand Network Tracking Reception cannot be deactivated without deactivating Alternative Reception See page 39 I 0 l O Z H 11 a5 2 0 Z m 12 A The same programme can be received on different frequencies Programme 1 broadcasting on frequency A Programme 1 broadcasting on frequency E AG St SSN ans Programme 1 broadcasting on frequency B Programme 1 broadcasting on frequency C Programme 1 broadcasting on frequency D Using Standby Reception Standby Reception allows the unit to switch temporarily to your favourite programme PTY Programme Type and Traffic Announcement TA from the current source another FM station CD and other
83. ew idling setting If it does not function correctly Audio Cruise is canceled automatically and the idling setting becomes invalid e If this happens see the NOTICE above 27 Cd Assigning names to the 3 Select the character set you want sources while is flashing E Each time you press the button the character set changes as follows You can assign names to CDs and the external component connected to the LINE IN plugs After los assigning a name it will appear on the display Be when you select the source a5 H sl O Z m Sources Maximum number of gt Capital letter ff Small letter 27 the characters _______ Numbers and symbols 7 CDs and Up to 32 characters up to CD changer 40 discs External component Up to 12 characters 4 Select a character About the available characters see page 29 You cannot assign a name to a CD Text 1 Select a source you want to assign a name to KR 5 Move the cursor to the next or 2 Press and hold SEL select for more previous character position than 2 seconds while pressing DISP WR When you select the CD as the source 6 Repeat steps 3 to 5 until you finish inputting the name 7 Press the button while the last selected character is flashing When you select the external component The input name is stored in memory connected to LINE IN as the source To erase the input cha
84. ez connecter un changeur CD JVC et ou un Het is mogelijk een JVC CD wisselaar en of JVC DAB tuner Tuner Tuner f r digitalen Rundfunk von JVC anschlie en e Weitere Informationen ber den Anschlu k nnen Sie der Bedienungscanleitung entnehmen die dem jeweiligen Ger t beiliegt Connecting cord supplied with your CD changer Verbindungskabel das zum Lieferumfang des Digital Audio Broadcasting tuner e For their connections refer to the instructions supplied with them Connecting cord supplied with your DAB tuner Verbindungskabel das zum Lieferumfang des DAB Tuners geh rt CD Wechsler geh rt Cordon de connexion fourni avec votre tuner DAB Cordon de connexion fourni avec votre changeur CD Verbindingskabel die met de DAB tuner wordt meegeleverd Verbindingskabel die met de CD wisselaar wordt meegeleverd lt i JVC DAB tuner JVC CD changer KD LX330R DAB Tuner von JVC CD Wechsler von JVC KD LX110R Tuner DAB JVC Changeur CD JVC JVC DAB tuner JVC CD wisselaar e You can connect both components in series as illustrated above e Es ist m glich beide Komponenten in einer Serienschaltung entsprechend der obigen Darstellung anzuschlieBen e Vous pouvez connecter les deux appareils en s rie comme montr ci dessus e Beide apparaten zijn volgens bovenstaande illustratie in serie aan te sluiten tuner DAB Digital Audio Broadcast JVC e Pour leurs connexions r f rez vous aux modes d emploi qui les accompagn
85. fuse on the rear Insert the 2 handles between the unit and the sleeve as illustrated to disengage the sleeve locks Remove the sleeve Note Be sure to keep the handles for future use after installing the unit 3 Attach the trim plate 4 Install the sleeve into the dashboard After the sleeve is correctly installed into the dashboard bend the appropriate tabs to hold the sleeve firmly in place as illustrated 5 Fix the mounting bolt to the rear of the unit s body and place the rubber cushion over the end of the bolt 6 Do the required electrical connections 7 Slide the unit into the sleeve until it is locked by pressing the four corners of the trim plate Note Do not press the panel shaded in the illustration otherwise the panel may become unable to open or close 1 Den Frontranmen herausnehmen 2 Die Halterung nach dem Entriegeln der Halterungensperren herausnehmen Das Ger t aufstellen Hinweis Beim Aufstellen des Ger ts darauf achten da die Sicherung auf der R ckseite nicht besch digt wird Die 2 Griffe zwischen dem Ger t und der Halterung wie abgebildet einstecken und die Halterungensperren entriegeln Die Halterung herausnehmen Hinweis Sicherstellen da die Griffe f r k nftigen Gebrauch nach dem Einbau des Ger ts aufbewahrt werden 3 Befestigen Sie die Frontrahmen 4 Die Halterung im Armaturenbrett einbauen Nach dem korrekten Einbau der Halterung im Armature
86. g to Network Tracking Reception will not operate RDS OPERATIONS A To use Network Tracking Reception press and hold TP RDS traffic programme radio data system for more than 1 second Each time you press and hold the button Network Tracking Reception modes change as follows ES gt Mode 1 Mode 2 Mode 3 AF indicator REG indicator Mode 1 The AF indicator lights up but the REG indicator does not Network Tracking Reception is activated with Regionalization set to off Switches to another station within the same network when the receiving signals from the current station become weak In this mode the programme may differ from the one currently received Mode 2 Both the AF indicator and the REG indicator light up Network Tracking Reception is activated with Regionalization set to on Switches to another station within the same network broadcasting the same programme when the receiving signals from the current station become weak Mode 3 Neither the AF indicator nor the REG indicator lights up Network Tracking Reception is deactivated Note If a DAB tuner is connected and Alternative Reception for DAB services is activated Network Tracking Reception is also activated automatically On the other hand Network Tracking Reception cannot be deactivated without deactivating Alternative Reception See page 36 I 0 l Z H 11 a5 2 0
87. gative de la batterie et d effectuer tous les raccordements lectriques avant d installer l appareil Si l on n est pas s r de pouvoir installer correctement cet appareil le faire installer par un technicien qualifi Remarque Cet appareil est congu pour fonctionner sur des sources de courant continu de 12 V masse NEGATIVE Si votre v hicule n offre pas ce type d alimentation il vous faut un convertisseur de tension que vous pouvez acheter chez un revendeur d autoradios JVC Remplacer le fusible par un de la valeur pr cis e Sile fusible saute souvent consulter votre revendeur d autoradios JVC Si le bruit est un probleme Cet appareil incorpore un filtre de bruit dans le circuit d alimentation Cependant avec certains v hicules quelques claquements ou autres bruits non d sir s risquent de se produire Si cela arrive raccorder la borne arri re de masse de l appareil au chassis de la voiture voir le diagramme de raccordement en utiliscant des cordons les plus gros et les plus courts possibles telle ou une barre de cuivre ou une tresse Si le bruit persiste consulter votre revendeur d autoradios JVC La puisscance admissible des enceintes devrait n tre pas plus qu c 50 W l arri re et a 50 W l avant avec une imp dance de 4 Q 8 Q e S assurer de raccorder la mise la masse de cet appareil au ch ssis de la voiture Le dissipateur de chaleur devient tr s chaud apr s usage Fair
88. hanges as follows DAB1 gt DAB2 DAB3 N 2 Select the number 1 6 for the preset DAB service you want eer DO DAB What you can do more with DAB Tracing the same program automatically Alternative Reception You can keep listening to the same program While receiving a DAB service When driving in an area where a service cannot be received this unit automatically tunes in another ensemble or FM RDS station broadcasting the same program While receiving an FM RDS station When driving in an area where a DAB service is broadcasting the same program as the FM RDS station is broadcasting this unit automatically tunes into the DAB service Note When reception switches between DAB and FM the listening volume level may increase or decrease inconveniently This change in the volume level results from unequal audio injection levels at broadcaster site but not from the malfunction of this unit To use Alternative Reception When shipped from the factory Alternative Reception is activated 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press A PPI or dd wv to select DAB AF alternative frequency 3 Turn the control dial to select the desired mode e AF ON Traces the program among DAB services and FM RDS stations Alternative Reception The AF indicator lights up on the display see page 11 e AF OFF Deactivates A
89. hanges as follows RND RANDOM1 RANDOM2 Canceled RND Mode Indicator Plays at random All tracks of the current disc then the tracks of the next disc and so on RANDOM1 Lights RANDOM2 Flashes All tracks of all discs inserted in the magazine 33 a5 2 0 2 H 34 To play back tracks repeatedly Repeat Play 1 Press MODE BAND while playing a CD MODE appears on the display QO Within 5 seconds 2 Press RPT repeat while MODE is still on the display so that the RPT indicator lights up on the display Each time you press the button CD repeat play mode changes as follows RPT REPEAT1 gt REPEAT2 Canceled lt __ RPT Plays M oce Indicator repeatedly To play back only intros Intro Scan 1 Press MODE BAND while playing a CD MODE appears on the display Within 5 seconds 2 Press INT intro while MODE is still on the display Each time you press the button CD intro scan mode changes as follows NT AV Mode Indication gt INTRO1 gt INTRO2 Canceled lt _ ___ Plays the beginnings 15 seconds REPEAT1 Lights The current track or specified track INTRO1 Track number flashes Of all tracks on all inserted discs REPEAT2 Flashes All tracks of the current disc or specified disc INTRO2 Disc
90. hangeur CD nous vous recommandons d utiliser un des changeurs CD de la s rie CH X e Si votre changeur appartient a la s rie KD MK vous avez besoin d un cordon optionnel KS U15K Vous pouvez aussi utiliser un appareil ext rieur tel qu un lecteur de MD en connectant l adaptateur d entr e de ligne KS U57 non fourni Voir le diagramme Q Voor het aansluiten van een CD wisselaar raden we een wisselaar uit de CH X serie aan e Als de CD wisselaar die u wilt aansluiten uit de KD MK serie komt hebt u een extra kabel nodig KS U15K Het is ook mogelijk een extern apparaat zoals een draagbare MD speler aan te sluiten met behulp van de Line Input Adapter KS U57 niet meegeleverd Zie schema CH Sicherungsblock Porte fusible Zekeringblok A une borne accessoire du porte fusible Naar een aansluitklem in het zekeringblok 15 A fuse Rear ground termina ren F A estate ne aeipona tps eboney anes See ean aea eee Hintere Erdungscan Th SUBWOOFER OUT Fusible 15 A Not included with this unit Wird nicht mit Ger t mitgeliefert Ignition switch schlu klemme B KD LX330R Zekering 15 A Non fourni avec cet appareil Niet bij het apparaat inbegrepen 4 Z ndschalter nore armere Qo masse see diagram D 2 Interrupteur d allumage Massaklem aan de achterkant siehe Schaltplan DI Blac
91. hat the security lock function is provided for this unit and therefore will foil their efforts 27 a5 H 0 Z m 28 WE When Security Lock works Once you register the password appears on the display and the unit will ask you to enter the password in the following cases e When you turn on the unit for the first time after re installing the unit When you turn on the unit for the first time after replacing the car battery To use this unit you must enter the correct password by following the procedure below 1 Turn the control dial to enter a character 2 Press A PBloridd v to move the character entry position 3 Repeat steps 1 and 2 to enter the entire password 4 letters correctly then press SEL select e If you enter the correct password the security lock is canceled and you can use the unit normally In the following cases the security lock is not canceled NOT ACCEPT appears on the display then the unit turns off The unit will never turn on unless you press the reset button on the front panel See page 2 Ifyou enter an incorrect password then press SEL select If you cannot finish entering the correct password within 30 seconds If you enter an incorrect character while entering the password Press 4 w to move back the character entry position over the incorrect character then turn the control dial to select the correct character To
92. inutes e DEMO OFF Turns the demo mode off Note Ifthe unit has been reset and the power is on demonstration will start if no sound comes in for about 10 seconds 25 a5 GU 0 Z m 26 WE Assigning names to CDs You can assign names to CDs After assigning a name it will appear on the display when you select the CD player or CD changer Maximum number of the characters Up to 32 characters up to 40 discs Note You cannot assign a name to a CD Text 1 Select a source you want to assign a name to Y 2 Press and hold SEL select for more than 2 seconds while pressing DISP Ka 3 Select a character About the available characters see the right column 4 Move the cursor to the next or previous character position 5 Repeat steps 3 and 4 until you finish inputting the name 6 Press the button while the last selected character is flashing The input name is stored in memory ES To erase the input characters Insert spaces using the same procedure described above Available characters Notes e When you try to assign a name to the 41st disc NAME FULL appears on the display In this case delete unwanted names before assignment e When the CD changer is connected you can assign names to CDs in the CD changer These names can also be shown on the display if you insert the CDs in this unit or Using the securi
93. k Contactschakelaar voir le diagramme f i Schwarz To metallic body or chassis of the car ee secon ee ee H Noir A Zur metallenen Karosserie oder zum Fahrwerk des Autos ily zie schema i ane 2 Zwart Au corps m tallique ou chassis de la voiture gt Naar metalen ondergrond of chassis van de auto y R is mE LINE IN Yellow To a live terminal in the fuse block connecting to the car battery bypassing LINE OUT em KD LX330R Gelb the ignition switch NES SE see diagram see diagram fi a Zur einer stromf hrenden Anschlu klemme im Sicherungsblock zum Anschlie en siehe Schaltplan 9 siehe Schaltplan Jaune an die Autobatterie Umgehen des Z ndschalterss l voir le diagramme f i voir le diagramme Geel A2 A une borne sous tension du porte fusible connectee a la batterie de la voiture zie schema amp zie schema amp d 2 en d rivant l interrupteur d allumage Naar een onder spanning staande aansluitklem in het zekeringblok die is aangesloten Red op de accu van de auto u passeert de ontstekingsschakelaar Rot l Rouge To an accessory terminal in the fuse block 2 Rood Zur einer Zubeh ranschlu klemme im Sicherungsblock Fuse block i Blue with white stripe 3 Blau mit wei em Streifen Bleu avec bande blanche Blauw met witte streep 1 Before checking the operation of this unit prior to installation this lead must be connected otherwise power cannot be turned on
94. kerdraden van de stroomkabel met de speakers verbindt moet u de bedrading van de speakers in uw auto controleren Als de bedrading van de speakers eruitziet zoals hieronder staat afgebeeld in Fig 1 en Fig 2 mag het apparaat NIET worden aangesloten met behulp van deze oorspronkelijke speakerbedrading Als u dat wel doet zal het apparaat ernstige schade oplopen Pas de bedrading van de speakers aan zodat u het apparaat met de speakers kunt verbinden zoals staat afgebeeld in Fig 3 Als de bedrading van de speakers eruitziet zoals staat afgebeeld in Fig 3 kunt u het apparaat aansluiten met behulp van de oorspronkelijke speakerbedrading in uw auto Als u twijfels hebt over de speakerbedrading in uw auto moet u contact opnemen met uw autodealer D Connections Adding Other Equipment Anschl sse zum Hinzuf gen von anderer Ausr stung Raccordement pour ajouter d autres appareils Aansluitingen voor het toevoegen van andere apparatuur Amplifier Verst rker Amplificateur Versterker You can connect an amplifier and other equipment to Sie k nnen einen Verst rker oder ein anderes Ger t upgrade your car stereo system anschlie en um Ihre Autostereoanlage zu erweitern e Connect the remote lead blue with white stripe to Schlie en Sie das Fernbedienungskabel blau mit the remote lead of the other equipment so that itcan Wei em Streifen an das Fernbedienungskabel des be controlled through this unit
95. lanc avec bande noire Di Blanc Gris avec bande noire Gris Vert avec bande noire vert Violet avec bande noire D Violet Wit met zwarte streep Wit Grijs met zwarte streep Grijs Groen met zwarte streep Groen Paars met zwarte streep Paars Right speaker rear Left speaker front Right speaker front Left speaker rear Rechter Lautsprecher Linker Lautsprecher vorne Rechter Lautsprecher vorne ESSEN Linker Lautsprecher hinten hinten Enceinte gauche avant Enceinte droit avant Enceinte gauche arri re Enceinte droit arri re Linkerspeaker voorin Rechterspeaker voorin Linkerspeaker achterin Rechterspeaker achterin RI PRECAUTIONS sur l alimentation et la connexion des enceintes e NE CONNECTEZ PAS les fils d enceintes du VORSICHTSMASSREGELN beim Anschlie en der Stromversorgung und Lautsprecher VOORZORGSMAATREGELEN bij het verbinden van de stroomkabeldraad met de speakers PRECAUTIONS on power supply and speaker connections e DO NOT connect the speaker leads of the power cord to the car battery otherwise the unit will be Die Lautsprecherleitungen des Netzkabels NICHT seriously damaged Connect the black lead ground yellow lead to car battery constant 12 V and red lead to an accessory terminal correctly BEFORE connecting the speaker leads of the power cord to the speakers check the speaker wiring in your car If the speaker wiring in your car is as illustrat
96. lapsed playing time Notes e The display shows up to 12 characters at one time and scrolls if there are more than 12 characters See also To select the scroll mode SCROLL MODE on page 25 e When you press DISP while playing a conventional CD NO NAME appears for the disc title performer and the track title Adjusting the sound SOUND ADJUSTMENTS amp You can adjust the sound characteristics to your preference T Select the item you want to adjust gt BASS gt TREBLE FADER Each time you press the button the adjustable items change as follows VOLUME lt WOOFER lt BBE lt BALANCE Indication To do Range BASS Adjust the bass 06 min 06 max TREBLE Adjust the treble 06 min 06 max FADER Adjust the front DOG Rear only and rear speaker balance F06 Front only BALANGE Adjust the left LO6 Left only and right speaker balance R06 Right only BBE See What is BBE on the OFF 1 2 3 next page WOOFER Adjust the 00 min subwoofer output level 08 max VOLUME Adjust the volume 00 min 50 max Tf you are using a two speaker system set the fader level to 00 2 Adjust the level St U f To increase the level I o o o 5 k X 3 lt L_ To decrease the level Equalization pattern changes as you adjust the bass
97. lease reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb Bitte setzen Sie Ihr Ger t zur ck Siehe Seite Zur cksetzen des Ger ts Vous avez des PROBLEMES de fonctionnement Reinitialisez votre appareil Referez vous la page intitul e Comment r initialiser votre appareil Hebt u PROBLEMEN met de bediening Stel het apparaat terug Zie de pagina met de paragraaf Het apparaat terugstellen a EN GE FR NL LA 0201MNMMDWTKR JVC MN ENGLISH SE I Hu CD RECEIVER CD RECEIVER a RECEPTEUR CD CD RECEIVER FRANCAIS KD LX110R NEDERLANDS COMPACT ml e aoe cros BBE geg For installation and connections refer to the separate manual Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung Pour l installation et les raccordements se r f rer au manuel s par Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het toestel For Customer Use Enter below the password INSTRUCTIONS you have entered for your security lock E lie Retain this password for GEBRUIKSAANWIJZING EE easswonn III PIM164100 E a5 GU 0 Z m Position And Reproduction Of Labels Bottom panel of the main unit CAUTION Invisible laser ADVARSEL Usynlig laser VARNING Osynlig laser VARO Avat
98. les into the slots as shown Then while gently pulling the handles away from each other slide out the unit Be sure to keep the handles after installing it Ausbau des Ger ts e Vor dem Ausbau des Ger ts den hinteren Teil freigeben 1 Den Frontrahmen herausnehmen 2 Die 2 Griffe in die Schlitze wie gezeigt stecken Dann die Griffe behutsam auseinander ziehen und das Ger t herausziehen Die Griffe nach dem Einbau auf jeden Fall aufbewahren Retrait de l appareil e Avant de retirer l appareil lib rer la section arri re 1 Retirer la plaque d assemblage 2 Introduire les 2 poignees dans les fentes comme montre Puis tout en tirant doucement les poign es cart es faire glisser l appareil pour le sortir S assurer de conserver les poign es apr s l installation de l appareil Verwijderen van het apparaat e Voordat u het apparaat verwijdert moet u het achtergedeelte losmaken 1 Verwijder de sierplaat 2 Plaatsde 2 hendels zoals afgebeeld in de sleuven Daarna duwtu de hendels zachtjes uit elkaar en kunt u het apparaat naar buiten schuiven Bewaar de hendels nadat u het apparaat hebt ge nstalleerd I Trim plate Frontrahmen Plaque d assemblage Sierplaat Handle Griff Poign e Hendel Parts list for installation and connection The following parts are provided with this unit After checking them please set them correctly Washer ob Unterlegscheibe g5 Rondelle
99. ls for FM and 9 kHz intervals for AM MW LW until you release the button When an FM stereo broadcast is hard to receive 1 Press MODE BAND while listening to an FM stereo broadcast the ST indicator lights up while receiving an FM stereo broadcast MODE appears on the lower part of the display and the number buttons can work as different function buttons 2 Press MONO while MODE is still on the display so that the MO indicator lights up on the display The sound you hear becomes monaural but the reception will be improved the ST indicator goes off Each time you press the button the MO indicator lights up and goes off alternately yN SR 2 Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory e Automatic preset of FM stations SSM Strong station Sequential Memory e Manual preset of both FM and AM stations x 0 O Z H FM station automatic preset SSM You can preset 6 local FM stations in each FM band FM1 FM2 and FM3 1 Select the FM band FM1 3 you want to store FM stations into 1 Press SOURCE to select sc FM as the source N If necessary press and hold MODE BAND to O select the FM band number FM1 FM2 or FM3 Each time you press and hold the button the FM band changes as follows Re FM2 daal 2 Press and hold both buttons for more than 2 seconds
100. lternative Reception Note When Alternative Reception for DAB services is activated Network Tracking Reception for RDS stations see page 11 is also activated automatically On the other hand Network Tracking Reception cannot be deactivated without deactivating Alternative Reception 4 Press SEL select to finish the setting x 0 l Z H 39 a5 2 0 Z m 40 ADDITIONAL INFORMATION PTY codes NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN News Topical programmes expanding on current news or affairs Programmes which impart advice on a wide variety of topics Sport events Educational programmes Radio plays Programmes on national or regional culture Programmes on natural science and technology Other programmes like comedies or ceremonies Pop music Rock music Easy listening music Light music Classical music Other music Weather information Reports on commerce trading the Stock Market etc Entertainment programmes for children SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT Programmes on social activities Programmes dealing with any aspect of belief or faith or the nature of existence or ethics Programmes where people can express their views either by phone or in a public
101. n Selected code name appears on the display If the code already stored in memory is selected it will flash on the display CONTINUED ON THE NEXT PAGE ba GU 0 H 13 a5 GU 0 2 H 14 A 4 Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset number you want MONO LOCAL INT ence PTY preset number appears and selected code name and MEMORY alternate on the display 5 Press SEL select to finish the setting me To search your favourite programme type 1 Press and hold PTY programme type for more than 1 second while listening to an FM station The last selected PTY code and preset number appear Select one of the PTY codes stored in preset number buttons 1 to 6 MONO LOCAL INT hdd PTY search for your favourite programme starts after 5 seconds e If there is a station broadcasting a programme of the same PTY code you selected that station is tuned in If there is no station broadcasting a programme of the same PTY code you selected the station will not change Note In some areas the PTY search will not work correctly Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons Usually when you press the number button the preset station is tuned in However when the preset station is an RDS station something differe
102. n search starts When a PTY station is tuned in the PTY indicator is lit E f you are listening to a CD or other connected components and wish to listen to a selected PTY broadcast press PTY to enter the PTY standby mode The PTY indicator lights up If the selected PTY programme starts broadcasting while the PTY standby mode is active the selected PTY name appears and the playback source changes to the FM band The selected PTY programme can then be heard To deactivate the PTY standby mode press PTY again Selecting your favourite programme for PTY Standby Reception You can select your favourite programme for PTY Standby Reception to store in memory When shipped from the factory NEWS is stored as the programme type for PTY Standby Reception 1 Press and hold SEL select for more than 2 seconds so that one ofthe PSM items appears on the display PSM see page 23 ON Select PTY STANDBY if not shown on the display Select one of twenty nine PTY codes Selected code name appears on the display and is stored into memory As you turn the control dial the PTY codes change as follows PTY codes NEWS AFFAIRS INFO SPORT EDUCATE z gt DRAMA CULTURE z gt SCIENCE z gt VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M gt WEATHER FINANCE z gt CHILDREN SOCIAL RELIGION PHONE IN gt TRAVEL LEISURE JAZZ COUNTRY NATION M gt OLDIES gt
103. n the display 3 Turn the control dial to select either CRUISE 1 or CRUISE 2 4 Press A bP or 44 Vv to select BOOST The current boost level also appears on the display 5 Turn the control dial to select the desired boost level among 01 to 15 6 Press SEL select to finish the setting dor If Audio Cruise does not function correctly You may need to store the idling speed into memory to make Audio Cruise function correctly x 0 l Z H NOTICE that a number of factors such as electric power steering wipers power windows air conditioner etc do generate noises and as a result may cause Audio Cruise not to function correctly If this is the main cause of malfunction connect the memory backup lead yellow lead directly to the car battery to prevent these noises from affecting Audio Cruise 1 Start the engine and let it warm up 2 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 3 Press A PPI or L a V repeatedly until CRUISE MODE appears on the display 4 Turn the control dial to select either CRUISE 1 or CRUISE 2 5 Press A bP or dd wv to select OR RPM SET 6 Turn the control dial to select the desired idling speed 7 Press SEL select to finish the setting When the setting is complete the unit automatically checks to see if Audio Cruise functions correctly with this n
104. naural but the reception will be improved the ST indicator goes off Each time you press the button the MO indicator lights up and goes off alternately yN SR 2 Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory e Automatic preset of FM stations SSM Strong station Sequential Memory e Manual preset of both FM and AM stations x 0 O Z H FM station automatic preset SSM You can preset 6 local FM stations in each FM band FM1 FM2 and FM3 1 Select the FM band FM1 3 you want to store FM stations into 1 Press SOURCE to select sc FM as the source N If necessary press and u hold MODE BAND to Cone 5 select the FM band number FM1 FM2 or FM3 Each time you press and hold the button the FM band changes as follows is gt FM2 den 2 Press and hold both buttons for more than 2 seconds FEES D P SSM appears then disappears when automatic preset is over Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected FM1 FM2 or FM3 These stations are preset in the number buttons No 1 lowest frequency to No 6 highest frequency When automatic preset is over the station stored in number button 1 will be automatically tuned in a5 H 0 Z m 10 N E Manual preset You can p
105. nbrett die entsprechenden Riegel umknicken um die Halterung an ihrem Platz zu sichern siehe Abbildung 5 Die Befestigungsschraube an der R ckseite des Ger tek rpers befestigen und das Ende der Schraube mit einem Gummipuffer abdecken 6 Nehmen Sie die erforderlichen elektrischen Anschl sse vor 7 Schieben Sie das Ger t in die Halterung Das Ger t wird verriegelt indem Sie auf die vier Ecken des Frontrahmen dr cken Hinweis Dr cken Sie nicht auf die Blende die in der Abbildung dunkelget nt dargestellt ist anderenfalls l t sich die Blende weder ffnen noch schlie en 1 Retirer la plaque d assemblage 2 Liberer les verrous du manchon et retirer le manchon Poser l appareil a la verticale Remarque Lorsque vous mettez l appareil a la verticale faire attention de ne pas endommager le fusible situ sur l arri re Ins rer les 2 poign es entre l appareil et le manchon comme indiqu pour d sengag les verrous de manchon Retirer le manchon Remarque S assurer de garder les poign es pour une utilisation ult rieur apr s l installation de l appareil 3 Attachez la plaque d assemblage 4 Installer le manchon dans le tableau de bord Apres installation correcte du manchon dans le tableau de bord plier les bonnes pattes pour maintenir fermement le manchon en place comme montr 5 Monter le boulon de montage sur l arri re du corps de l appareil puis passer l amor
106. nd control dial come out 2 Select the source TA Each time you press the O button the source changes as follows FM gt DAB tuner CD CD changer External component AM back to the beginning If a CD is not in the loading slot you cannot select CD as the source to play Without connecting the CD changer and or the DAB tuner you cannot select it as the source to play To operate the tuner FM or AM see pages 8 15 To operate the CD player see pages 16 18 To operate the CD changer see pages 32 34 To operate the external component see page 35 To operate the DAB tuner see pages 36 39 Note on display illustrations Illustrations will differ from what appears if CLOCK DISP is set to CLK DISP OFE See page 24 To decrease the volume Volume level meter 4 Adjust the sound as you want see page 19 To drop the volume in a moment Press SOURCE for more than 1 second while listening to any source ATT starts flashing on the display and the volume level will drop in a moment To resume the previous volume level press the button for more than 1 second again To turn off the power Press and hold OFF A until SEE YOU appears on the display Note When you use this unit for the first time set the built in clock correctly see page 22 ENGLISH a5 GU 0 2 H RADIO
107. ne in FM stations only with strong signals 1 Press MODE BAND MODE appears on the lower part of the display and the number buttons can work as different function buttons 2 Press LOCAL while MODE is still on the display so that the LOCAL indicator lights up on the display This function works only while searching FM stations including SSM preset see page 9 Each time you press the button the LOCAL indicator lights up and goes off alternately Searching a station manually Manual search 1 Select the band Lay 1 Press SOURCE to select CS FM or AM as the source Each time you press and hold the button the FM band changes as follows Pen gt FM2 dende Note This receiver has three FM bands FMI FM2 FM3 You can use any one of them to listen to an FM broadcast N If necessary press and hold MODE BAND to select the FM band number FM1 FM2 or FM3 2 Press and hold A gt gt or lt lt v until M manual starts flashing on the display tut II ind HK ar Li u J O 3 Tune into a station you want while M is flashing Press A bP to tune into stations of higher frequencies 7 Press da wv to tune into stations of lower frequencies If you release your finger from the button the manual mode will automatically turn off after 5 seconds e If you hold down the button the frequency keeps changing in 50 kHz interva
108. ng the receiver using the remote control you can hide the control panel to make the front panel look flat When shipped from the factory FLAT OFF is selected e FLAT ON The control panel will not come out when you turn on the unit To use the control panel press L a Y so that the control panel comes out If no operation is done for about 10 seconds it automatically goes back into the receiver You can use the control panel normally FLAT OFF Note When FLAT ON is selected you can eject a CD by holding aa w or To change the FM tuner selectivity IF FILTER In some areas adjacent stations may interfere with each other If this interference occurs noise may be heard This unit has been preset to automatically reduce this interference noise AUTO when shipped from the factory e AUTO When this type of interference occurs this unit automatically increases the tuner selectivity so that interference noise will be reduced But the stereo effect will also be lost Subject to the interference from adjacent stations but sound quality will not be degraded and the stereo effect will not be lost x 0 l Z H e WIDE To turn the demo mode on or off DEMO MODE You can turn the demo mode on or off When shipped from the factory DEMO ON is selected e DEMO ON Turns the demo mode on The demonstration will start automatically if no sound comes in for 3 m
109. nt will happen If the signals from that preset station are not sufficient for good reception this unit using the AF data tunes in another frequency broadcasting the same programme as the original preset station is broadcasting In case no other station is tuned in you can also search all receivable frequencies for the same programme Programme search To activate programme search follow the procedure below Programme search takes a while See also Changing the general settings PSM on page 22 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press A gt ei or lt lt V to select P Programme SEARCH 3 Turn the control dial to select SEARCH ON Now programme search is activated 4 Press SEL select to finish the setting To cancel programme search repeat the same procedure and select SEARCH OFF in step 3 by turning the control dial counterclockwise Changing the display mode while listening to an FM station You can change the initial indication on the display to either station name PS NAME or to station frequency FREQUENCY while listening to an FM RDS station See also Changing the general settings PSM on page 22 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press A pbl or dd v to select TUNER DISP tuner display 3 Turn the con
110. number flashes when it is shown on the display Of the first track on each inserted disc EXTERNAL COMPONENT OPERATIONS Et ee Ve DDODDDDO BADE Playing an external component Using a subwoofer When connecting an external component to the LINE IN plugs on the rear you can select the component as the sound source T Select the external component source Each time you press the Q button the source changes as described on page 7 2 Operate the external component Note For the external component connection see the Installation Connection Manual separate volume By connecting a subwoofer to the SUBWOOFER OUT plugs on the rear you can enjoy enhanced bass sounds and a more realistic theater atmosphere in your car Refer also to the instructions supplied with your subwoofer When a subwoofer is connected to this unit select an appropriate cutoff frequency level for your subwoofer To set the subwoofer cutoff frequency see To select the subwoofer cutoff frequency WOOFER FREQ on page 25 To adjust the subwoofer output volume see Adjusting the sound on page 19 ba 2 z 0 H 35 AB DAB TUNER OPERATIONS a5 2 0 Z m P ZZ ER SEN We recommend that you use DAB Digital Audio I I Broadcasting tuner KT DB1500 wi
111. ogramme is received the volume level automatically changes to the preset level See also Changing the general settings PSM on page 22 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press A Borda v to select TA VOLUME 3 Turn the control dial to set to the desired volume You can set it from VOL 00 to VOL 50 4 Press SEL select to finish the setting Automatic clock adjustment When shipped from the factory the clock built in this unit is set to be readjusted automatically using the CT Clock Time data in the RDS signal If you do not want to use automatic clock adjustment follow the procedure below See also Changing the general settings PSM on page 22 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press A PPI or dd v to select AUTO ADJUST 3 Turn the control dial to select ADJUST OFF Now automatic clock adjustment is canceled 4 Press SEL select to finish the setting To reactivate clock adjustment repeat the same procedure and select ADJUST ON in step 3 Note You must stay tuned to the same station for more than 2 minutes after setting AUTO ADJUST to ADJUST ON Otherwise the clock time will not be adjusted This is because the unit takes up to 2 minutes to capture the CT data in the RDS signal x 0 l
112. ogramme type for more than 1 second while listening to an FM station The last selected PTY code and preset number appear 2 Select one ofthe PTY codes stored in preset number buttons 1 to 6 MONO LOCAL INT PERCRE PTY search for your favourite programme starts after 5 seconds If there is a station broadcasting a programme of the same PTY code you selected that station is tuned in If there is no station broadcasting a programme of the same PTY code you selected the station will not change Note In some areas the PTY search will not work correctly 14 Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons Usually when you press the number button the preset station is tuned in However when the preset station is an RDS station something different will happen If the signals from that preset station are not sufficient for good reception this unit using the AF data tunes in another frequency broadcasting the same programme as the original preset station is broadcasting In case no other station is tuned in you can also search all receivable frequencies for the same programme Programme search To activate programme search follow the procedure below Programme search takes a while See also Changing the general settings PSM on page 22 1 Press and hold SEL select for more than 2 seconds so that on
113. pe button e Also functions as SSM buttons when pressed 6 OFF amp eject button together with the DISP button 7 Number buttons How to use the number buttons After pressing MODE BAND the number buttons work as different function buttons while MODE remains on the display To use these buttons as number buttons after pressing MODE BAND wait for 5 seconds without pressing any number button so that on ae MODE disappears from the display san e Pressing MODE BAND again also a ng D amp D erases MODE from the display D e Functions as the PRESET button while listening to the radio or the DAB tuner Each time you press the button the preset station number increases and the selected station is tuned in e Functions as the DISC button while listening to the CD changer Each time you press the button the disc number decreases and the selected disc starts playing Functions the same as the control dial on the main unit NOTE This button does not function for the preferred setting mode adjustment Selects the sound mode Each time you press SCM Sound Control Memory the mode changes 6 Selects the source Each time you press FUNC function the source changes Ze Searches stations while listening to the radio e Selects services while listening to the DAB tuner if pressed briefly e Searches ensembles while listening to the DAB tuner if pressed for more than 1
114. performer appear on the display Then the current track title appears on the display followed by the track number and elapsed playing time See also Playing a CD Text page 18 and To select the scroll mode SCROLL page 24 If a CD Text includes much text information some may not appear on the display e Ifyou change the source CD play also stops without ejecting the CD To stop play and eject the CD Press OFF A briefly CD play stops the display panel moves down then the CD automatically ejects from the loading slot To move up the display panel press A gt gt I or lt lt vw If no button is pressed the display panel will move up in about 5 minutes CAUTION NEVER insert your finger between the display panel and the unit as it may get caught in the unit Note Ifthe ejected disc is not removed for about 15 seconds the disc is automatically inserted again into the loading slot to protect it from dust CD play will not start this time Locating a track or a particular portion on a CD To fast forward or reverse the track Press and hold A pl while playing a CD to fast forward the track Press and hold a w while playing a CD to reverse the track To go to the next tracks or the previous tracks ON aoe Press A Bl briefly while playing a CD to go ahead to the beginning of the next track KS Each time you press the button wo consecutively the beginning of
115. r buttons can work as different function buttons 2 Press INT intro while MODE is still on the display Each time you press the button CD intro scan mode turns on and off alternately Track number of the currently playing track When the intro scan mode is turned on INTRO appears on the display for 5 seconds and the track number flashes Prohibiting CD ejection You can prohibit CD ejection and can lock a CD in the loading slot While pressing SOURCE press and hold OFF amp for more than 2 seconds NO EJECT flashes on the display for about 5 seconds and the CD is locked and cannot be ejected Note If you press OFF A while CD ejection is prohibited the control panel moves down but the CD cannot be ejected NO EJECT appears on the display To move up the display panel press A Bl or aa v To cancel the prohibition and unlock the CD press and hold OFF amp for more than 2 seconds again while pressing SOURCE EJECT OK flashes on the display for about 5 seconds and the CD is unlocked Playing a CD Text In a CD Text some information about the disc its disc title performer and track title is recorded You can show these disc information on the display Select text display mode while playing a CD Text los O Each time you press the button the display changes as follows Disc Title Performer Track Title Current track no and E
116. r faith or the nature of existence or ethics PHONE IN Programmes where people can express their views either by phone or in a public forum TRAVEL Programmes about travel destinations package tours and travel ideas and opportunities LEISURE Programmes concerned with recreational activities such as gardening cooking fishing etc JAZZ Jazz music COUNTRY Country music NATION M Current popular music from another nation or region in that country s language OLDIES Classic pop music FOLK M Folk music DOCUMENT Programmes dealing with factual matters presented in an investigative style What appears to be trouble is not always serious Check the following points before calling a service centre Symptoms TROUBLESHOOTING Causes Remedies CD cannot be played back CD is inserted upside down Insert the CD correctly x 0 l Z H CD sound is sometimes interrupted You are driving on rough roads Stop CD play while driving on rough roads CD is scratched Change the CD Connections are incorrect Check the cords and connections Sound cannot be heard from the speakers The volume level is set to the minimum level Adjust it to the optimum level Connections are incorrect Check the cords and connections SSM Strong station Sequential Memory automatic preset does not work Signals are too weak Store stations manually
117. racters Insert spaces using the same procedure described above 28 Available characters Capital letters Notes When you try to assign a name to the 41st disc NAME FULL appears on the display In this case delete unwanted names before assignment e When the CD changer is connected you can assign names to CDs in the CD changer These names can also be shown on the display if you insert the CDs in this unit I CU 0 H 29 a5 H sl O Z m 30 Ur d Using the security lock You can prohibit the unauthorized use of this unit by the others To use the security lock you need to set the password first Once you set the password the unit will ask you to enter the password when you turn on the unit for the first time after re installation or after recovering the car battery exhaustion CAUTION Be careful not to forget the password you have entered otherwise you cannot use this unit Keep the password in your mind and more importantly on paper or some other materials You can write down your password in the spaces provided on the cover page Registering the password You have to use 4 characters for your password You can use the following characters Capital letters A Z small letters a z and numbers 0 9 1 Press and hold both buttons for more than 2 seconds pee GJ The unit enters password entry mode
118. rd Sind Sie sich ber den richtigen Einbau des Ger ts nicht sicher lassen Sie es von einem qualifizierten Techniker einbauen Hinweis Dieses Ger t ist f r einen Betrieb in elektrischen Anlagen mit 12 V Gleichstrom und Erdung ausgelegt Verf gt Ihr Fahrzeug nicht ber diese Anlage ist ein Spannungsinverter erforderlich der bei JVC Autoradioh ndler erworben werden kann e Die Sicherung mit einer der entsprechenden Nennleistung ersetzen Brennt die Sicherung h ufig durch wenden Sie sich an ihren JVC Autoradioh ndler e Sind St rger usche ein Problem Dieses Ger t enth lt ein St rfilter im Stromkreis Bei manchen Fahrzeugen kann jedoch ein Klicken oder andere unerw nschte St rger usche auftreten Sollte das der Fall sein die hintere Erdungscanschlu klemme siehe Schaltplan des Ger ts am Fahrwerk des Fahrzeugs anschlie en dabei k rzere und dickere Kabel wie beispielsweise Kupfergeflechtdraht oder Stahldraht verwenden Bleibt St rger usch bestehen wenden Sie sich an Ihren JVC Autoradioh ndler e Maximale Eingangsleistung der Lautsprecher sollte nicht mehr als 50 W hinten und 50 W vorne sein mit einer Impedanz von 4 Q bis 8 Q e Sicherstellen da das Ger t am Fahrwerk geerdet wird e Das Abstrahlblech wird nach dem Gebrauch sehr hei Beim Ausbau des Ger ts darauf achten das Abstrahlblech nicht zu ber hren Pour viter tout court circuit nous vous recommandons de debrancher la borne ne
119. rde snoer als in het voorbeeld aanpassen Billa De la carrosserie de la e Neem contact op met uw offici le autodealer alvorens dit apparaat te installeren j Fe os cI Yellow Gelb Jaune Geel Yellow Gelb Jaune Gee B2 a2 voiture Original wiring B3 A3 Vanaf de auto Originalverdrahtung C blage original SC E B4 A4 Originele bedrading so connector Rot Ss Red Rot Rouge Roo ISO Stecker Rouge Red Rot Rouge Rood Connecteur ISO Rood ou ISO connector ISO connector of the supplied power cord Modified wiring 1 Yellow Gelb Jaune Geel Yellow Gelb JauneGeel Use modified wiring 2 if the unit does not turn on B Ge nderte Ge nderte Verdrahtung 2 verwenden wenn das ISO Stecker am Stromkabel an u Ger t so nicht an geht P P P K e u Connecteur ISO pour le cordon d alimentation fourni Cablag ae d er J Utilisez le c blage modifi 2 si l appareil ne se met ISO connector van het meegeleverde snoer Aangepaste bedrading I on Red Rot Rouge Rood pas sous tension Red Rot Rouge Rood Pas de bedrading 2 aan indien het apparaat niet reageert bij inschakelen iew from the lead side Modified wiring 2 Yellow Gelb Jaune Geel Yellow Gelb Jaune Geel Ge nderte l Ansicht von der Leitungsseite Verdrahtung 2 Vue partir du c t des fils C blage modifi 2 RediRov CS Red Rot Aanzicht vanaf het snoer Aangepaste bedrading 2 Rouge Rood Rouge Rood Red Rot Rouge Rood D Connections without using the ISO connecters Anschl sse ohn
120. reset up to 6 stations in each band FM1 FM2 FM3 and AM manually Ex Storing an FM station of 88 3 MHz into the preset number 1 ofthe FM1 band T Select the band EMIL 1 Press SOURCE to select FM as the source 4 2 Press and hold MODE BAND repeatedly to select the FM1 band 2 Tune into a station of 88 3 MHz Press A bP to tune into Press L a Vv to tune into stations of lower frequencies stations of higher frequencies ETH f 3 Press and hold the number button in this example 1 for more than 2 seconds SCM Band number and MEMO appear alternately for a while 4 Repeat the above procedure to store other stations into other preset numbers Notes e A previously preset station is erased when a new station is stored in the same preset number e Preset stations are erased when the power supply to the memory circuit is interrupted for example during battery replacement If this occurs preset the stations again Tuning into a preset station You can easily tune into a preset station Remember that you must store stations first If you have not stored them yet see Storing stations in memory on pages 9 and 10 1 Select the band TA Press SOURCE to select FM or AM as the source N If necessary press and hold MODE BAND to select the FM band number FM1 FM2 or FM3 Each time you press and hold the button
121. ries wrap in tape and insulate otherwise it may cause the batteries to give off heat crack or start a fire Do not poke the batteries with tweezers or similar tools Doing this may cause the batteries to give off heat crack or start a fire BASIC OPERATIONS 2 The display illuminates and the control panel and control dial come out 2 Select the source source Each time you press the S button the source changes as follows FM gt DAB tuner gt CD CD changer or external component AM gt back to the beginning If a CD is not in the loading slot you cannot select CD as the source to play Without connecting the equipment and setting EXT INPUT correctly see page 25 you cannot select it as the source to play To operate the tuner FM or AM see pages 8 15 To operate the CD player see pages 16 18 To operate the CD changer see pages 29 31 To operate the external component see page 22 To operate the DAB tuner see pages 33 36 Note on display illustrations Illustrations will differ from what appears if CLOCK DISP is set to CLOCK OFF See page 24 To decrease the volume Volume level meter 4 Adjust the sound as you want see page 19 To drop the volume in a moment Press SOURCE for more than 1 second while listening to any
122. s Always hold the CD by the edges Do not touch its recording surface When storing a CD into its case gently insert the CD around the center holder with the printed surface facing up e Make sure to store CDs into the cases after use Center holder Pr To keep CDs clean A dirty CD may not play correctly If a CD does become dirty wipe it with a soft cloth in a straight line from center to edge To play new CDs New CDs may have some rough spots around the inner and outer edges If such a CD is used this unit may reject the CD To remove these rough spots rub the edges with a pencil or ball point pen etc About mistracking Mistracking may result from driving on extremely rough roads This does not damage the unit and the CD but will be annoying We recommend that you stop CD play while driving on such rough roads Moisture condensation Moisture may condense on the lens inside the CD player in the following cases After starting the heater in the car If it becomes very humid inside the car Should this occur the CD player may malfunction In this case eject the CD and leave the unit turned on for a few hours until the moisture evaporates When playing a CD R or CD RW User edited CD Rs Recordable and CD RWs Rewritable can be played back only if they are already finalized e You can play back your original CD Rs or CD RWs recorded in music CD form
123. s 7 DAB1 gt DAB2 gt DAB3 7 2 Tune into an ensemble you want 3 Select a service of the ensemble you want Press MODE BAND MODE appears on the display 7 2 Press A PPI ora v to select a service you want while MODE is still on the display CONTINUED ON THE NEXT PAGE x 0 O Z H 37 a5 H 0 Z m 38 DAB 4 Press and hold the number button in this example 1 you want to store the selected service into for more than 2 seconds SCM Band number and MEMO appear alternately for a while 5 Repeat the above procedure to store other DAB services into other preset numbers Notes e A previously preset DAB service is erased when a new DAB service is stored in the same preset number e Preset DAB services are erased when the power supply to the memory circuit is interrupted for example during battery replacement If this occurs preset the DAB services again Tuning into a preset DAB service You can easily tune into a preset DAB service Remember that you must store services first If you have not stored them yet see page 37 1 Select the DAB tuner DAB1 3 Press SOURCE to select TA DAB tuner as the source If necessary press and hold MODE BAND we repeatedly to select the LS DAB band number DAB1 DAB2 or DAB3 Each time you press and hold the button the DAB band c
124. s relatively quiet e CRUISE 2 Select this if your car is relatively loud The volume increase rate is twice as much as that of the CRUISE 1 setting e CRUISE OFF Cancels Audio Cruise 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display See page 23 2 Select CRUISE MODE 3 Select the desired setting As you turn the control dial the Audio Cruise mode changes as follows gt CRUISE 1 gt CRUISE 2 lt CRUISE OFF lt _____ 4 Press SEL select to finish the setting When this function is turned on the CRUISE indicator lights up on the display the proper volume level is automatically selected among the 3 possible levels according to the driving speed and the selected level is shown on the display When the driving speed increases Ir S S i CRUISE T onge onge Tommes I t J L J L zl EN SE DE S zet 5 NS 7 When the driving speed decreases To adjust the volume increase rate If you find Audio Cruise increases or decreases the volume either too much or too little as the driving speed changes you can adjust the increase rate by changing the boost level To change it follow the procedure below 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press A BPI or L a V repeatedly until CRUISE MODE appears o
125. s the button consecutively the beginning of the next track is located and played back Press L a V briefly while playing a CD to go back to the beginning of the current track Each time you press the button consecutively the beginning of the previous tracks is located and played back To go to a particular disc directly Press the number button corresponding to the disc number to start its playback while the CD changer is playing SCM MONO LOCAL INT RPT RND e To select a disc number from 1 6 Press 1 7 6 12 briefly To select a disc number from 7 12 Press and hold 1 7 6 12 for more than 1 second Track number Elapsed playing time Af iml wl Disc number Ex When disc number 3 is selected To show the CD Text information This is possible only when connecting a JVC CD automatic changer equipped with CD Text reading capability See Playing a CD Text on page 18 Selecting CD playback modes There is a time limit in doing the following procedure If the setting is cancelled before you finish start from step 1 again I 0 O Z H To play back tracks at random Random Play 1 Press MODE BAND while playing a CD MODE appears on the display BAND Within 5 seconds 2 Press RND random while MODE is still on the display so that the RND indicator lights up on the display Each time you press the button CD random play mode c
126. sco 02 00 2 music SCM SOFT Quiet 01 03 OFF background music SCM POP Light music 04 01 OFF SCM OFF Flat sound 00 00 2 Recalling the sound modes When SCM LINK is set to SCM LINK ON select the source Y The sound mode stored in memory for the selected source is recalled Notes You can adjust each sound mode to your preference and store it in memory If you want to adjust and store your original sound mode see Storing your own sound adjustments on the right column To adjust the bass and treble reinforcement levels or the BBE function temporarily see pages 19 and 20 Your adjustments will be canceled if another source is selected Storing your own sound adjustments You can adjust the sound modes SCM BEAT SCM SOFT SCM POP to your preference and store your own adjustments in memory e There is a time limit in doing the following procedure If the setting is canceled before you finish start from step 1 again 1 Press MODE BAND The number buttons can work as different function buttons Within 5 seconds 2 Select the sound mode you want som For details see page 20 7 Q Select the item you want to adjust BASS TREBLE or BBE Adjust the selected item N 1 2 Repeat step 3 to adjust the other items A Press MODE BAND A 5 Press and hold SCM until the sound mode you have select
127. source ATT starts flashing on the display and the volume level will drop in a moment To resume the previous volume level press the button for more than 1 second again To turn off the power Press and hold OFF A until SEE YOU appears on the display Note When you use this unit for the first time set the built in clock correctly see page 22 ENGLISH a5 2 q 0 Z m e RADIO BASIC OPERATIONS EEN Listening to the radio You can use either automatic searching or manual searching to tune into a particular station Searching a station automatically Auto search 1 Select the band 1 Press SOURCE to select FM or AM as the source J P If necessary press and hold MODE BAND to select the FM band number FM1 FM2 or FM3 Each time you press and hold the button the FM band changes as follows Pe END RES Selected band appears Note This receiver has three FM bands FMI FM2 FM3 You can use any one of them to listen to an FM broadcast 2 Start searching a station NT lt lt Press A Pl to search IN stations of higher frequencies N Press da W to search 7 Stations of lower frequencies ee MTR s N H When a station is received searching stops To stop searching before a station is received press the same button you have pressed for searching To tu
128. sprechern Ist die Lautsprecherausgangsleitung kurzgeschlossen Ton verzerrt Ist die Lautsprecherausgangsleitung geerdet Sind die Anschlu klemmen der linken und rechten Lautsprecher zusammen geerdet Ger t wird hei Ist die Lautsprecherausgangsleitung geerdet Sind die Anschlu klemmen der linken und rechten Lautsprecher zusammen geerdet aangesloten De stroom kan niet worden ingeschakeld Is de gele draad aangesloten Er komt geen geluid uit de speakers Is de uitgaande speakerdraad kortgesloten Het geluid wordt vervormd Is de uitgaande speakerdraad geaard Zijn de minpolen van de linker en de rechterspeakers gemeenschappelijk geaard Het apparaat raakt verhit Is de uitgaande speakerdraad geaard Zijn de minpolen van de linker en de rechterspeakers gemeenschappelijk geaard Power cannot be turned on Is the yellow lead connected No sound from the speakers Is the speaker output lead short circuited Sound is distorted Is the speaker output lead grounded Are the terminals of L and R speakers grounded in common Unit becomes hot Is the speaker output lead grounded Are the terminals of L and R speakers grounded in common L appareil ne peut pas tre mise sous tension Le fil jaune est elle raccord e Pas de son des enceintes Le fil de sortie d enceinte est il court circuit Le son est d form Le fil de sortie d enceinte est il a la masse Les
129. taessa ja radiation when open and straling ved bning n r str lning n r denna del r suojalukitus ohitettaessa interlock failedor defeated sikkerhedsafbrydere er ude ppnad och sp rren rlolet alttiina n kym tt AVOID DIRECT EXPOSURE Jaf funktion Undg udseet urkopplad Betrakta ejlm lle lasers teilylle TO BEAM e telse for str ling d stralen s l katso s teeseen f D s IMPORTANT FOR LASER PRODUCTS Precautions 1 CLASS 1 LASER PRODUCT 2 CAUTION Invisible laser radiation when open and CLASS 1 interlock failed or defeated Avoid direct exposure to LASER PRODUCT beam 3 CAUTION Do not open the top cover There are no user serviceable parts inside Leave all servicing to qualified service personnel Caution 4 CAUTION This CD player uses invisible laser This product contains a laser component radiation and is equipped with safety switches to of higher laserclass than Glass prevent radiation emission when unloading CDs It is dangerous to defeat the safety switches 5 CAUTION Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure How to reset your unit Q PA Press the reset button on the front panel using a ball point pen or a similar tool This will reset the built in microcomputer Note Your preset adjustments such as preset channels or sound a
130. te streep met de externe kabel van het andere apparatuur zodat deze op afstand vanaf deze apparaat kan worden bediend e Alleen voor een versterker Verbind de uitgang van het apparaat met de ingang van de versterker Koppel de speakers van dit apparaat los en verbind ze aan de versterker Alleen voor KD LX330R Het uitgangsniveau van het geluid is hoog om het hifi geluid van deze eenheid te behouden Wanneer u een extern apparaat op deze eenheid aansluit moet u erop letten dat u de versterkingsfactor van de externe versterker laag houdt zodat deze eenheid de beste prestaties levert Y connector not supplied with this unit Y Anschlu nicht mitgeliefert Connecteur Y non fourni avec cet appareil Y connector niet meegeleverd To power aerial if any Zur Motorantenne sofern vorhanden A l antenne automatique s il y en a une Naar de antenne indien aanwezig Achterspeakers ICL gt Uh LINE OUT REAR ek gt Di LINE OUT FRONT Front speakers JVC Verst rker d JVC Amplifier Cut the rear speaker leads of the care ISO connector and connect them to the amplifier Die Leitungen des ISO Steckers der hinteren Lautsprecher durchtrennen und am Verst rker anschlie en Coupez les fils des enceintes arri re du connecteur ISO de la voiture et connectez les a l amplificateur Knip de draden van
131. teur gt q e S JVC Versterker Remote lead Blue with white stripe Rear speakers Hintere Lautsprecher Enceintes arri re Fernbedienungsleitung Blau mit wei em Streifen Fil d alimentation distance Bleu avec bande blanche Antennedraad Blauw met witte streep gt Vous pouvez connecter un amplificateur ou autre appareil pour am liorer votre syst me autoradio Connectez le fil de commande a distance bleu avec bande blanche au fil de commande distance de l autre appareil de fa on qu il puisse tre command via cet appareil Pour l amplificateur seulement Raccorder les bornes de sortie ligne de cet appareil aux bornes d entr e ligne de l amplificateur D connectez les enceintes de cet appareil et connectez les a l amplificateur Laissez les fils d enceintes de cet appareil inutilis s Pour le KD LX330R seulement Le niveau de sortie de ligne de cet appareil est maintenu a un niveau lev pour maintenir une qualit Hi Fi pour les sons reproduits par cet appareil Lors de la connexion d un amplificateur ext rieur a cet appareil diminuez le r glage du gain sur l amplificateur ext rieur pour obtenir les meilleures performances de cet appareil Remote lead Fernbedienungsleitung Fil d alimentation a distance Antennedraad Het is mogelijk om uw autostereosysteem uit te breiden met een versterker of andere apparatuur e Verbind de externe kabel blauw met wit
132. th your unit Tuning into an ensemble and If you have another DAB tuner consult your JVC ONE of the services IN CAR ENTERTAINMENT dealer j Refer also to the Instructions supplied with your A typical ensemble has 6 or more programmes DAB tuner services broadcast at the same time After tuning into an ensemble you can select a service you What is DAB system want to listen to DAB is one of the digital radio broadcasting 1 Select the DAB tuner DAB1 3 systems available today It can deliver CD quality sound without any annoying interference and TR signal distortion Furthermore it can carry text S pictures and data In contrast to FM broadcast where each programme is transmitted on its own frequency 2 Select the DAB band DAB1 DAB2 or DAB combines several programmes called DAB3 services to form one ensemble sano With the DAB tuner connected with this unit za you can enjoy these DAB services Each time you press and hold the button the DAB band changes as follows Mm DAB1 gt DAB2 DAB3 7 Note This receiver has three DAB bands DAB1 DAB2 DAB3 You can use any of them to tune into an ensemble 3 Start searching an ensemble ONE Press A ee to search a IN ensembles of higher frequencies x Ze Press kt wv to search ss ensembles of lower frequencies When an ensemble is received searching stops To stop searching before an ensemble is received press the same button
133. the FM band changes as follows Ba FM2 Zu 2 Select the number 1 6 for the preset station you want If the sound quality decreases and the stereo effect is lost while listening to an FM station In some areas adjacent stations may interfere with each other If this interference occurs this unit can automatically reduce this interference noise the initial setting when shipped from the factory However in this case the sound quality will be degraded and the stereo effect will be also lost If you do not want to degrade the sound quality and to lose the stereo effect rather than to eliminate the interference noise see To change the FM tuner selectivity IF FILTER on page 26 What you can do with RDS EON RDS Radio Data System allows FM stations to send an additional signal along with their regular programme signals For example the stations send their station names as well as information about what type of programme they broadcast such as sports or music etc Another advantage of RDS function is called EON Enhanced Other Networks The EON indicator lights up while receiving an FM station with the EON data By using the EON data sent from a station you can tune into a different station of a different network broadcasting your favourite programme or traffic announcement while listening to another programme or to another source such as CD By receiving the RDS data this unit
134. the next tracks is located and played back Press ida w briefly while playing a CD to go back to the beginning of the current track Each time you press the button consecutively the beginning of the previous tracks is located and played back To go to a particular track directly DDO MONO LOCAL COE Press the number button corresponding to the track number to start its playback e To select a track number from 1 6 Press 1 7 6 12 briefly e To select a track number from 7 12 Press and hold 1 7 6 12 for more than 1 second Selecting CD playback modes To play back tracks at random Random Play You can play back all tracks on the CD at random 1 Press MODE BAND while playing a CD MODE appears on the lower part of the display and the number buttons can work as different function buttons 2 Press RND random while MODE is still on the display so that the RND indicator lights up on the display Each time you press the button CD random play mode turns on and off alternately The RND indicator 30 When the random mode is turned on the RND indicator lights up on the display and a track randomly selected starts playing To play back tracks repeatedly Repeat Play You can play back the current track repeatedly 1 Press MODE BAND while playing a CD MODE appears on the lower part of the display and the number buttons can work as differ
135. the stations send their station names as well as information about what type of programme they broadcast such as sports or music etc Another advantage of RDS function is called EON Enhanced Other Networks The EON indicator lights up while receiving an FM station with the EON data By using the EON data sent from a station you can tune into a different station of a different network broadcasting your favourite programme or traffic announcement while listening to another programme or to another source such as CD By receiving the RDS data this unit can do the following Tracing the same programme automatically Network Tracking Reception Standby Reception of TA Traffic Announcement or your favourite programme e PTY Programme Type search e Programme search e And some other functions Tracing the same programme automatically Network Tracking Reception When driving in an area where FM reception is not good the tuner built in this unit automatically tunes into another RDS station broadcasting the same programme with stronger signals So you can continue to listen to the same programme in its finest reception no matter where you drive See the illustration on the next page Two types of the RDS data are used to make Network Tracking Reception work correctly PI Programme Identification and AF Alternative Frequency Without receiving these data correctly from the RDS station you are listenin
136. tisseur en caoutchouc sur l extr mit du boulon 6 R alisez les connexions lectriques 7 Faire glisser l appareil dans le manchon jusqu ce qu il soit verrouill en appuyant sur les quatre coins de la plaque d assemblage Remarque N appuyez pas sur le panneau ombr sur illustration sinon le panneau risquerait de ne pas pouvoir s ouvrir ou se fermer 1 Verwijder de sierplaat 2 Verwijder het huis nadat u de klemmen hebt losgemaakt Zet het apparaat rechtop Opmerking Wanneer u het apparaat rechtop zet moet u erop letten dat u de zekering aan de achterkant niet beschadigt Plaats de 2 hendels zoals afgebeeld tussen het apparaat en het huis om de klemmen los te maken 3 Verwijder het huis Opmerking Bewaar de hendels nadat u het apparaat hebt ge nstalleerd zodat u ze ook in de toekomst kunt gebruiken 3 Bevestig de sierplaat 4 Installeer het huis in het dashboard Nadat het huis op de juiste wijze in het dashboard is geplaatst moet u de palletjes zoals afgebeeld stevig op hun plaats duwen 5 Maak de bevestigingsbout aan de achterkant van het apparaat vast en plaats de rubberdop over het uiteinde van de bout 6 Breng de vereiste elektrische verbindingen tot stand 7 Schuif het apparaat in het huis totdat het vergrendeld is kunt u deze vastzetten door op de vier hoeken van de sierplaat te drukken Opmerking Druk niet op het paneel zelf gearceerd weergegeven in de illustratie
137. tive terminal and make all electrical connections before installing the unit If you are not sure how to install this unit correctly have it installed by a qualified technician Note This unit is designed to operate on 12 V DC NEGATIVE ground electrical systems If your vehicle does not have this system a voltage inverter is required which can be purchased at JVC IN CAR ENTERTAINMENT dealers Replace the fuse with one of the specified rating If the fuse blows frequently consult your JVC IN CAR ENTERTAINMENT dealer If noise is a problem This unit incorporates a noise filter in the power circuit However with some vehicles clicking or other unwanted noise may occur Ifthis happens connect the units rear ground terminal see connection diagram to the car s chassis using shorter and thicker cords such as copper braiding or gauge wire If noise still persists consult your JVC IN CAR ENTERTAINMENT dealer Maximum input of the speakers should be no more than 50 W at the rear and 50 W at the front with an impedance of 42 to 8 Q Be sure to ground this unit to the car s chassis The heat sink becomes very hot after use Be careful not to touch it when removing this unit Heat sink lt Abstrahlblech 4 Dissipateur de chaleur Warmte opnemer Zur Vermeidung von Kurzschl ssen empfehlen wir da Sie den negativen Batterieanschlu abtrennen und alle elektrischen Anschl sse herstellen bevor das Ger t eingebaut wi
138. trol Range Bass 10 dB at 100 Hz Treble 10 dB at 10 kHz Frequency Response 40 Hz to 20 000 Hz Signal to Noise Ratio 70 dB Line In Level Impedance 1 5 V 20 kQ load Line Out Level Impedance 4 0 V 20 kQ load full scale Output Impedance 1 kQ TUNER SECTION Frequency Range FM 87 5 MHz to 108 0 MHz AM MW 522 kHz to 1 620 kHz LW 144 kHz to 279 kHz FM Tuner Usable Sensitivity 11 3 dBf 1 0 uV 75 Q 50 dB Quieting Sensitivity 16 3 dBf 1 8 uV 75 Q Alternate Channel Selectivity 400 kHz 65 dB Frequency Response 40 Hz to 15 000 Hz Stereo Separation 30 dB Capture Ratio 1 5 dB MW Tuner Sensitivity 20 uV Selectivity 35 dB LW Tuner Sensitivity 50 uV SPECIFICATIONS CD PLAYER SECTION Type Compact disc player Signal Detection System Non contact optical pickup semiconductor laser Number of channels 2 channels stereo Frequency Response 5 Hz to 20 000 Hz Dynamic Range 96 dB Signal to Noise Ratio 98 dB Wow and Flutter Less than measurable limit x 0 O Z H GENERAL Power Requirement Operating Voltage DC 14 4 V 11 V to 16 V allowance Grounding System Negative ground Allowable Operating Temperature 0 C to 40 C Dimensions W x H x D Installation Size 182 mm x 52 mm x 160 mm Panel Size 188 mm x 58 mm x 8 mm Mass 1 8 kg excluding accessories Design and specifications subject to change without notice 43 Having TROUBLE with operation P
139. trol dial to set to the desired indication PS NAME or FREQUENCY 4 Press SEL select to finish the setting Note By pressing DISP you can also change the display while listening to an FM RDS station Each time you press the button the following information appears on the display Y Station name PS NAME Y Station Frequency FREQUENCY Y Programme type PTY e Then the display goes back to the original indication in several seconds Setting the TA volume level You can preset the volume level for TA Standby Reception When a traffic programme is received the volume level automatically changes to the preset level See also Changing the general settings PSM on page 22 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press A lor ld v to select TA VOL TA volume 3 Turn the control dial to set to the desired volume You can set it from VOL 00 to VOL 50 4 Press SEL select to finish the setting Automatic clock adjustment When shipped from the factory the clock built in this unit is set to be readjusted automatically using the CT Clock Time data in the RDS signal If you do not want to use automatic clock adjustment follow the procedure below See also Changing the general settings PSM on page 22 1 Press and hold SEL select for more than 2 seconds so that one of
140. ty lock 2 Select a character As you turn the control dial 7 You can prohibit the unauthorized use of this unit character changes as by the others follows g To use the security lock you need to set the wi password first Once you set the password the gt A lt B lt gt Ca Zen alphabets unit will ask you to enter the password when you turn on the unit for the first time after re installation gt a lt gt 0 lt or after recovering the car battery exhaustion CAUTION Be careful not to forget the password you have entered otherwise you cannot use this unit Keep the password in your mind and more importantly on paper or some other 3 D materials You can write down your password Move the character entry position to in the spaces provided on the cover page the next Registering the password You have to use 4 characters for your password You can use the following characters Capital letters A Z and numerals 0 9 1 Press and hold both buttons for more than 2 seconds all 4 characters pe 4 Repeat steps 2 and 3 until you enter REENEN 5 Press SEL select to finish the setting The password flashes on the display for a while then the Lou unit returns to the normal operation mode How to Use the Provided CODE Sticker Attach the provided CODE sticker in a conspicuous position on your car to notify would be unauthorized users t
141. uerst das Autoradio ausbauen und dann das Ger t an seinem Platz einbauen Par exemple dans une Toyota retirer d abord l autoradio et installer l appareil a la place Voorbeeld Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren Not included with this unit en Nicht Teil dieses Ger ts Non fourni avec cet appareil Bracket Niet meegeleverd Konsole Support Flat type screws M5 x 6 mm Console Senkkopfschrauben M5 x 6 mm OS Vis a t te plate M5 x 6 mm Pocket Bracket Platkopschroeven M5 x 6 mm Taschen Konsole Poche Support Zak Console Note When installing the unit on the mounting bracket make sure to use the 6 mm long screws If longer screws are used they could damage the unit Hinweis Beim Anbringen des Ger t an der Konsole sicherstellen da 6 mm lange Schrauben verwendet werden Werden l ngere Schrauben verwendet k nnen sie das Ger t besch digen Remarque Lors de l installation de l appareil sur le support de montage s assurer d utiliser des vis d une longueur de 6 mm Si des vis plus longues sont utilis es elles peuvent endommager l appareil Opmerking Wanneer u het apparaat aan de bevestigingsklem vastmaakt moet u de 6 mm lange schroeven gebruiken Als u langere schroeven gebruikt kan het apparaat worden beschadigd Removing the unit e Before removing the unit release the rear section 1 Remove the trim plate 2 Insert the 2 hand
142. unctions as SSM buttons when pressed TP traffic programme el elle together with the MODE BAND button RDS radio data system button 6 MODE BAND button 5 PTY programme type button e Also functions as SSM buttons when pressed 6 OFF amp eject button together with the DISP button 17 Number buttons How to use the number buttons After pressing MODE BAND the number buttons work as different function buttons while MODE remains on the display To use these buttons as number buttons after pressing MODE BAND wait for 5 seconds without pressing any number button so that MODE disappears from the display sano coe a DEN Pressing MODE BAND again also l E DOR OOE erases MODE from the display Remote controller With an optionally purchased remote controller We recommend that you use remote controller RM RK31 with your unit The following are the instructions for using RM RK31 EES Jvc 1 Turns on the unit if pressed when the unit is turned off e Turns off the unit if pressed and held until SEE YOU appears on the display Drops the volume level for a moment if pressed briefly Press again to resume the volume 2 Functions as the BAND button while listening to the radio or the DAB tuner Each time you press the button the band
143. und dem Motorantenne sofern vorhanden in folgender Reihenfolge anschlieBen Schwarz Erdung Gelb an Autobatterie konstant 12 V Rot zur einer Zubeh ranschlu klemme Blau mit wei em Streifen zur Motorantenne max 200 mA Orange mit wei em Streifen zur Autolichtschalter Braun zur Mobiltelefon Weitere informationen entnehmen Sie bitte der Bedienungscanleitung a la batterie de la voiture aux enceintes et a l antenne automatique s il y en a une dans l ordre suivant Noir a la masse Jaune ala batterie de la voiture 12 V constant Rouge une borne accessoire Bleu avec bande blanche a l antenne automatique 200 mA max Orange avec bande blanche a l interrupteur d clairage de la voiture Marron un syst me de t l phone cellulaire de hierna genoemde volgorde aan op de accu van de auto de luidsprekers en de antenne indien aanwezig Zwart aarde Geel naar de accu van de auto constant 12 V Rood naar de aansluitklem van de accessoire Blauw met witte streep naar de antenne Max 200 mA Oranje met witte streep naar de schakelaar voor de autoverlichting Bruin naar het mobiele telefoonsysteem Lees Pour les d tails se r f rer aux instructions du t l phone cellulaire Autres aux enceintes 3 Connectez le cordon d antenne voor meer informatie de instructies die bij de mobiele telefoon worden geleverd D Andere naar de spe
144. utions 1 CLASS 1 LASER PRODUCT 2 CAUTION Invisible laser radiation when open and CLASS 1 interlock failed or defeated Avoid direct exposure to beam 3 CAUTION Do not open the top cover There are no user serviceable parts inside Leave all servicing to qualified service personnel 4 CAUTION This CD player uses invisible laser LASER PRODUCT Caution This product contains a laser component radiation and is equipped with safety switches to of higher laser class than Class 1 prevent radiation emission when unloading CDs It is dangerous to defeat the safety switches 5 CAUTION Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure How to reset your unit Q PA Press the reset button on the front panel using a ball point pen or a similar tool This will reset the built in microcomputer Note Your preset adjustments such as preset channels or sound adjustments will also be erased Note For security reasons a numbered ID card is provided with this unit and the same ID number is imprinted on the unit s chassis Keep the card in a safe place as it will help the authorities to identify your unit if stolen CAUTION on Volume Setting CDs produce very little noise compared with other sources If the volume level is adjusted for the tuner for example the speakers may be damaged
145. you have 36 pressed for searching 4 Select a service you want to listen to TE Press MODE BAND MODE appears on the display n Press A Peoria v to select a service you want while MODE is still on the display To change the display information while tuning into an ensemble Normally service name is shown on the display If you want to check the ensemble name or its frequency press DISP display Each time you press the button the following information appears for a while on the display Y Service name Y Ensemble name Y Channel number Y Frequency To tune in a particular ensemble without searching 1 Press SOURCE to select DAB tuner as the source 2 Press MODE BAND repeatedly to select the DAB band DAB1 DAB2 or DAB3 3 Press and hold A Bl or dd Vv for more than 1 second 4 Press A gt ei orea Y repeatedly until the ensemble you want is reached e If you hold down the button the ensemble keeps changing until you release the button DAB Storing DAB services in memory You can preset up to 6 DAB services in each DAB band DAB1 DAB2 and DAB3 manually 1 select the DAB tuner DAB1 3 TA 1 Press SOURCE to select DAB tuner as the source N If necessary press and is hold MODE BAND repeatedly to select the DAB band number DAB1 DAB2 or DAB3 Each time you press and hold the button the DAB band changes as follow

JVC KD-LX330R User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents