Home

JVC KD-LH70R User's Manual

1. Turns on the unit if pressed when the unit is turned off Turns off the unit if pressed and held until SEE YOU appears on the display Drops the volume level in a moment if pressed briefly Press again to resume the volume Selects the band while listening to the radio or the DAB tuner Each time you press the button the band changes Skips to the first file of the next folder while listening to an MP3 disc Each time you press the button you can move to the next folder and start playing the first file While playing an MP3 disc on an MP3 compatible CD changer Skips to the next disc if pressed briefly Skips to the next folder if pressed and held Note While playing a CD on a CD changer this always skips to the next disc gt D 3 Selects the preset stations while listening to the radio or the DAB tuner Each time you press the button the preset station or service number increases and the selected station or service is tuned in Skips to the first file of the previous folder while listening to an MP3 disc Each time you press the button you can move to the previous folder and start playing the first file While playing an MP3 disc on an MP3 compatible CD changer Skips to the previous disc if pressed briefly Skips to the previous folder if pressed and held Note While playing a CD on a CD changer this always skips to the previou
2. m When the current source is other than FM the TP indicator lights up If a station starts broadcasting a traffic announcement TRAFFIC appears on the display and this unit automatically changes the Source and tunes in to the station To deactivate the TA Standby Reception press T TP PTY again The TP indicator disappears Using PTY Standby Reception PTY Standby Reception allows the unit to switch temporarily to your favorite programme PTY Programme Type from the current source another FM station CD or other connected components PTY Standby Reception will not work if you are listening to an AM station You can select your favorite programme type for PTY Standby Reception When shipped from the factory PTY Standby Reception is turned off OFF is selected for PTY Standby Reception Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display PSM see page 33 2 Select PTY STBY standby if not shown on the display 3 Select one of the twenty nine PTY codes See page 19 INN Selected code name appears on the display and is stored into memory eo m When the current source is FM the PTY indicator either lights up or flashes e If the PTY indicator lights up PTY Standby Reception is activated If a station starts broadcasting the selected PTY programme this unit automatically tunes in to the station If the PTY i
3. When CLOCK is set to ON see page 34 the current indication will soon change to the clock time Notes MP3 discs require a longer readout time It differs due to the complexity of the folder file configuration When playback starts folder and file names or ID3 tags will automatically appears See also page 27 f you change the source or turn the power off disc playback stops without ejecting the disc Next time you select the CD player as the source or turn the power on disc play starts from where playback has been stopped previously To stop play and eject the disc Press A Playback stops and the control panel flips down The disc automatically ejects from the loading slot To change the display information While playing back an MP3 file you can change the MP3 disc information shown on the display pid Each time you press D DISP the display changes to show the following When TAG DISP is set to TAG ON initial setting see page 35 PY Album name performer folder name TAG lights up on the display Y Track title file name TAG A lights up on the display Y Elapsed playing time and Current file number bo Ifan MP3 file does not have ID3 tags folder name and file name appear In this case the TAG indicator will not lights up on the display When TAG DISP is set to TAG OFF EE Folder name lights up on the display Y File name
4. LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT Entertainment programmes for children Programmes on social activities Programmes dealing with any aspect of belief or faith or the nature of existence or ethics Programmes where people can express their views either by phone or in a public forum Programmes about travel destinations package tours and travel ideas and opportunities Programmes concerned with recreational activities such as gardening cooking fishing etc Jazz music Country music Current popular music from another nation or region in that country s language Classic pop music Folk music Programmes dealing with factual matters presented in an investigative style The same programme can be received on different frequencies Programme 1 broadcasting on frequency A Programme 1 broadcasting on frequency B Programme 1 broadcasting on frequency C Programme 1 broadcasting on frequency E Programme 1 broadcasting on frequency D x o o z H 19 ENGLISH CD OPERATIONS JHPIY DISP SSN WE OO DY Ce GB amp 87 GB EF CS ED Refer to MP3 OPERATIONS on pages 26 to 29 for operating MP3 discs Playing a CD I Open the control panel Note on One Touch Operation When a CD is already in the loading slot pressing CD CD CH turns on the unit and starts playback automatically 2 In
5. ma Selecting preset sound modes indication For Preset values eh C EQ custom equalizer BAS TRE LOUD USER Flat sound 00 00 OFF SG You can select a preset sound mode C EQ ROCK Rock or 403 01 ON custom equalizer suitable to the music genre disco music There is a time limit in doing the following CLASSIC Ee 2 SURE SER procedure If the setting is canceled before you finish start from step 1 again POPS Light music 04 401 OFF HIP HOP Funk or rap 02 00 ON Press M MODE to enter the music functions mode JAZZ Jazz music 02 03 OFF a MODE flashes on the upper part of the display Note You can adjust each sound mode to your preference 2 Press EQ equalizer while MODE Once you make an adjustment it is automatically is still flashing on the display P Ea The last selected sound mode is recalled and applied to the current source EQ ROCK CLASSIC POPS HIP HOP JAZZ USER e Sound mode indicator flashes Ex If you have selected USER previously 3 Select the sound mode you want Tr Each time you press the e button the sound modes change as follows gt USER ROCK CLASSIC JAZZ lt HIP HOP lt POPS mLOUDum EQ Rock CLASSIC POPS HIP HOP JAZZ USER Sound mode indicator flashes Ex When you select ROCK 30 stored for the currently selected sound mode See Adjusting the sound on page 31 Adj
6. AM F1 F2 F3 d Note This receiver has three FM bands FM1 FM2 FM3 You can use any one of them to listen to an FM broadcast 2 Press and hold gt A or aa v until MANU manual starts flashing on the display 3 Tune in to a station you want while MANU manual is flashing r To tune in to stations of higher frequencies To tune in to stations of lower frequencies f you release your finger from the button the manual mode will automatically turns off after 5 seconds f you hold down the button the frequency keeps changing in 50 kHz intervals for FM and 9 kHz for AM MW LW until you release the button When an FM stereo broadcast is hard to receive aid 1 Press M MODE to enter the functions mode while listening to an FM stereo broadcast MODE flashes on the upper part of the display 8 MO 2 Press MO monaural while MODE is still flashing on the display so that the MO indicator lights up on the display Each time you press the button the MO indicator lights up and goes off alternately us EQ Rock CLASSIC POPS HIP HOP JAZZ USER MO monaural indicator When the MO indicator is lit on the display the sound you hear becomes monaural but the reception will be improved W Manual preset You can preset up to 6 stations in each band FM1 FM2 FM3 and AM manually Storing stations in memory You
7. Is the speaker output lead short circuited Sound is distorted Is the speaker output lead grounded Are the terminals of L and R speakers grounded in common Unit becomes hot Is the speaker output lead grounded Are the terminals of L and R speakers grounded in common Die Sicherung brennt durch Sind die roten und schwarzen Leitungen richtig angeschlossen Stromversorgung kann nicht eingeschaltet werden st die gelbe Leitung angeschlossen Kein Ton aus den Lautsprechern st die Lautsprecherausgangsleitung kurzgeschlossen Ton verzerrt st die Lautsprecherausgangsleitung geerdet Sind die AnschluBklemmen der linken und rechten Lautsprecher zusammen geerdet Ger t wird hei st die Lautsprecherausgangsleitung geerdet Sind die AnschluBklemmen der linken und rechten Lautsprecher zusammen geerdet Le fusible saute Les fils rouge et noir sont ils racord s correctement L appareil ne peut pas tre mise sous tension Le fil jaune est elle raccord e Pas de son des enceintes Le fil de sortie d enceinte est il court circuit Le son est d form Le fil de sortie d enceinte est il la masse Les bornes des enceintes gauche et droit sont elles mises ensemble la masse L appareil devient chaud Le fil de sortie d enceinte est il la masse Les bornes des enceintes gauche et droit son
8. 1 Before checking the operation of this unit prior to Blue with white stripe Naar een aansluitklem in het zekeringblok J Zekeringblok installation this lead must be connected otherwise power cannot be turned on 1 Vor der berpr fung der Funktionsf higkeit des Ger ts vor dem Einbau mu diese Leitung angeschlossen werden da sonst die Stromversorgung nicht eingeschaltet werden kann 1 Pour v rifier le fonctionnement de cet appareil avant installation ce fil doit tre raccord sinon l appareil ne peut pas tre mis sous tension Voordat u controleert of het apparaat werkt alvorens het te installeren moet deze draad aangesloten zijn Als dit niet het i Blau mit wei em Streifen i geval is kan de stroom niet worden ingeschakeld Bleu avec bande blanche Blauw met witte streep To remote lead of other equipment or power aerial if any Zum Zusatzkabel des anderen Ger ts oder der Motorantenne sofern vorhanden Au fil de t l commande de l autre appareil ou l antenne automatique s il y en a une Naar afstandsdraad van andere apparatuur of antenne met circuit indien aanwezig To car light control switch Zum Autolichtschalter A l interrupteur d clairage de la voiture Naar de schakelaar voor de autoverlichting A2 ILLUMINATION 6 sel Orange with white stripe Orange mit weiBem Streifen Orange avec bande blanche Oranje met witte streep To cellular phone system Zur Mo
9. CHANGER To use the CD changer e LINEIN To use the external component other than CD changer Note For connecting the Line Input Adapter KS U57 and the external component refer to the Installation Connection Manual separate volume To turn the tag display on or off TAG DISP An MP3 file can contain file information called ID3 Tag where its album name performer track title etc are recorded There are two versions ID3v1 ID3 Tag version 1 and ID3v2 ID3 Tag version 2 This unit is compatible only with ID3v1 When shipped from the factory TAG ON is selected TAG ON x o l o z H Turns on the ID3 tag display while playing MP3 files f an MP3 file does not have ID3 tags folder name and file name appear Note If you change the setting from TAG OFF to TAG ON while playing an MP3 file the tag display will be activated when the next file starts playing TAG OFF Turns off the ID3 tag display while playing MP3 files Only the folder name and file name can be shown 35 Assigning names to the sources A move the cursor to the next or previous character position You can assign names to CDs both in this unit and in the CD changer After assigning a name it will appears on the display when you select the source x o E o Z m Maximum number of characters Sources finish entering the name CDs Up to 32 characters up to sh entering the e
10. lights up on the display Y Elapsed playing time and Current file number m n nn BR Note The display shows up to 8 characters at a time and scrolls if there are more than 8 characters See also To select the scroll mode SCROLL on page 35 e Locating a file or a particular portion on an MP3 disc For MP3 playback search order see page 25 To fast forward or reverse the file r Press and hold P A while playing an MP3 disc to fast forward the M file P Press and hold L a v while playing an MP3 disc to reverse the file Note During this operation you can only hear intermittent sounds The elapsed playing time also changes intermittently on the display To skip to the next or previous files Press P A briefly while playing to skip ahead to the beginning of JN the next file Each time you press the button consecutively the beginning of the next files is located and played back Press lt lt YW briefly while playing to skip back to the beginning of the current file Each time you press the button consecutively the beginning of the previous files is located and played back To go to a particular file quickly within the current folder 10 and 10 buttons 1 Press M MODE to enter the functions mode while playing an MP3 disc MODE MODE flashes on the upper part of the display CONTINUED ON THE NEXT PAGE ENGLISH 27
11. x o l o z H 28 e amp 2 Press 10 or 10 to the first file The first time you press 10 or 10 button the file skips to the nearest higher or lower file with a file number of multiple ten ex 10th 20th 30th Then each time you press the button you can skip 10 files see How to use the 10 and 10 buttons below After the last file the first file will be selected and vice versa How to use the 10 and 10 buttons Ex 1 To select file number 32 while playing file number 6 MODE Re Three times Twice File 6 gt 10 gt 20 30 gt 31 32 Ex 2 To select file number 8 while playing file number 36 MODE A m Three times gt 30 20 10 Twice File 36 gt 9 8 To go to a particular folder directly IMPORTANT To directly select the folders using the number button s it is required that folders are assigned 2 digit numbers at the beginning of their folder names This can only be done during the recording of CD Rs or CD RWs Ex If folder name is 01 ABC Press 1 to go to Folder 01 ABC If folder name is 1 ABC pressing 1 does not work If folder name is 12 ABC Press and hold 6 12 to go to Folder 12 ABC Press the number button corresponding to the folder number to start playing the first file in the selected folder n RPT 12 RND GEG GE GD GE CD NS To select a folder
12. 2 Press P A ori Y to select DAB AF alternative frequency 3 Turn the control dial to select the desired mode AFON Traces the program among DAB services and FM RDS stations Alternative Reception The AF indicator lights up on the display see page 13 AF OFF Alternative Reception is deactivated 4 Press SEL select to finish the setting Note When Alternative Reception for DAB services is activated Network Tracking Reception for RDS stations see page 13 is also activated automatically On the other hand Network Tracking Reception cannot be deactivated without deactivating Alternative Reception To adjust the DAB volume level You can adjust the volume level of DAB tuner and store it in memory By adjusting the volume level properly to match it to the FM sound level you will not need to adjust the volume level each time you change the source When shipped from the factory DAB volume level is set at OO See also Changing the general settings PSM on page 32 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press P A oraa V to select DAB VOL volume 3 Turn the control dial to set to the desired volume You can set it from VOL 12 to VOL 12 4 Press SEL select to finish the setting TROUBLESHOOTING What appears to be trouble is not always serious Check the following points before c
13. appears then the unit turns off f you turn off the power while listening to a disc disc play will start from where playback has been stopped previously next time you turn on the power CAUTION on Volume Setting Discs produce very little noise compared with other sources If the volume level is adjusted for the tuner for example the speakers may be damaged by the sudden increase in the output level Therefore lower the volume before playing a disc and adjust it as required during playback x o o Z H x o E o z H 62 O ty Gay C Ez 2 ED ED Setting the clock 4 Set the clock system 1 Select 24H 12H You can also set the clock system to either 24 2 Select 24H or 12H hours or 12 hours T Press and hold SEL select for more than 2 seconds so that one of the PSM item appears on the display PSM see page 33 2 Set the hour Select CLOCK H hour if not shown on the display Adjust the hour N Note To show the clock time on the display see page 34 To check other information during play press D DISP DISP 3 Set the minute ec 3 Each time you press the button the other Select CLOCK M minute information will be shown on the upper part of the display See page 34 for details Pressing D DISP with the unit turned off will show
14. mes des fils en les raccordant Draai de kerndraden om elkaar heen wanneer u ze wilt aansluiten Solder the core wires to connect them securely Die Kerndrahte anl ten um sie fest anzuschlieBen Souder les mes des fils pour les raccorder entre eux de facon s re Soldeer de kerndraden zodat ze stevig vast zitten CAUTION VORSICHT PRECAUTION LET OP To prevent short circuit cover the terminals of the UNUSED leads with insulating tape e Zur Vermeidung eines Kurzschlusses die AnschluBklemmen der NICHT VERWENDETEN Leitungen mit Isolierklebeband umwickeln oy Pour viter les court circuits couvrir les bornes des fils qui ne sont PAS UTILIS S avec de la bande isolante P PN Om kortsluiting te voorkomen moet u de aansluitklemmen van ONGEBRUIKTE gekleurde draden met isolatieband bedekken Ij Connections Adding Other Equipment Anschl sse zum Hinzuf gen von anderer Ausr stung Raccordement pour ajouter d autres appareils Aansluitingen voor het toevoegen van andere apparatuur You can connect an amplifier and other equipment to Sie k nnen einen Verst rker oder ein anderes Ger t upgrade your car stereo system anschlieBen um Ihre Autostereoanlage zu erweitern e Connect the remote lead blue with white stripe to e Schlie en Sie das Fernbedienungskabel blau mit the remote lead of the other equipment so that it weiBem Streifen an das Fernbedienungskabel des can be controlled
15. remove the magazine and set the discs correctly If no magazine is loaded in the CD changer NO MAG appears on the display If this happens insert the magazine in the CD changer If RESET 1 RESET 8 appears on the display something is wrong with the connection between this unit and the CD changer If this happens check the connection and make sure the cords are connected firmly Then press the reset button of the CD changer Playing discs Select the CD changer CD CH gt CD gt CD CH f you have changed EXT IN setting to LINE IN see page 35 you cannot select the CD changer When the current disc is an MP3 disc Playback starts from the first folder of the current disc once file check is completed An Selected disc number MP3 indicator fii folder indicator When CLOCK is set to ON see page 34 the current indication will soon change to the clock time Note Folder name appears on the display instead of ROOT if an MP3 disc contains a folder When the current disc is a CD Playback starts from the first track of the current disc Selected disc number EQ nock CLASSIC POPS HIP HOP JAZZ USER Elapsed playing time Current track aml EQ ROCK CLASSIC POPS HIP HOP JAZZ USER When CLOCK is set to ON see page 34 the current indication will s
16. 40 CDs 6 Finish the procedure while the last You cannot assign a name to CD Text or an MP3 selected character is flashing disc T Select a source you want to assign a name to CD CH ons When you select a source the power To erase the entered characters automatically comes on Insert spaces using the same procedure described above 2 While pressing D DISP press and hold SEL select for more than 2 Available characters seconds DISP Notes When you try to assign a name to the 41st disc NAME FULL appears on the display In this 2 EQ ROCK CLASSIC POPS HIPHOP JAZZ USER E Ex When you select CD as the source case delete unwanted names before assignment When the CD changer is connected you can assign 3 Select a character names to CDs in the CD changer These names can also be shown on the display if you insert the CDs See right column for in this unit available characters When the power supply to the memory circuit is interrupted for example during battery replacement all the preset settings are erased If this occurs reset the unit see page 2 Then assign names to the sources again 36 Detaching the control panel You can detach the control panel when leaving the car When detaching or attaching the control panel be careful not to damage the connectors on the back of the control panel and on the panel holder Detaching the control panel Bef
17. Frequency secondary you want to listen to Ki Press A up to select the f next service If a primary TO tune in to a particular ensemble without E S service has some searching X zug X secondary services they Before you start lt are selected before the Press FM AM DAB briefly if CD CD changer or next primary service is external component is the current source selected 1 Press and hold FM AM DAB to select DAB tuner as the source 2 Press FM AM DAB repeatedly to select the DAB band DAB1 DAB2 or DAB3 3 Press and hold gt gt A or s yw for more than one second 4 Press P A Or L a w repeatedly until the ensemble you want is reached f you hold down the button the frequency keeps changing until you release the button 5 Press A up or e down to select a service either primary or secondary you want to listen to Press w down to select the previous service either primary or secondary To restore the FM AM tuner Press and hold FM AM DAB again 45 BAR Storing DAB services in 4 Select a service of the ensemble you N memory want to listen to l 9 EA You can preset up to 6 DAB services in each Press A up to select the mill DAB band DAB1 DAB2 and DAB3 manually next service Before you start KV Press v down to select Press FM AM DAB briefly if CD CD changer or E the previous service external component is the current source Sele
18. and hold P A while playing a CD to fast forward the track ZA a gt Je To skip 10 tracks forwards X Q E Deeg To skip 10 tracks backwards to the first track Press and hold L a wv while playing a CD to reverse the track previous tracks Press P A briefly while playing a CD to go ahead to the beginning of the next track Each time you press the button consecutively the beginning of the next tracks is located and played back Press L a Y briefly while playing a CD to go back to the beginning of the current track Each time you press the button consecutively the beginning of the previous tracks is located and played back CONTINUED ON THE NEXT PAGE 21 x o E o z H 22 How to use the 10 and 10 buttons Ex 1 To select track number 32 while playing track number 6 A ue Q E Three times Twice Track 6 gt 10 20 30 31 32 Ex 2 To select track number 8 while playing track number 36 e Q E Three times Twice Track 26 30 20 10 9 8 Selecting CD playback modes To play back tracks at random Disc Random Play You can play back all tracks on the CD at random Sg 1 Press M MODE to enter the functions mode while playing a CD MODE flashes on the upper part of the display 12 RND EN 2 Press RND random while MODE is still flashing on the display so that DISC RND app
19. audio quality choose a higher bit rate The most popular bit rate for encoding is 128 Kbps This unit is incorporated with an MP3 decoder You can play back MP3 files tracks recorded on CD Rs CD RWs and CD ROMs Compatible with ID3v1 Version 1 Extra information data such as album title performer name song title recording year music genre and a brief comment can be stored within an MP3 file This unit can show ID3v1 Version 1 tags album name performer name and song title on the display See page 27 Some characters cannot be shown correctly e This unit is not compatible with ID3v2 Version 2 Other main features in this unit Maximum number of folders files 289 Total Available characters for folder file names A Z 0 9 _ underscore Maximum number of characters for file name ISO 9660 Level 1 12 inclusive of separation mark and extension code mp3 ISO 9660 Level 2 31 inclusive of separation mark 77 and extension code mp3 64 inclusive of separation mark and extension code mp3 Maximum number of characters for folder name 64 Joliet Precautions when recording MP3 files on a CD R or CD RW This unit can only read MP3 files that are recorded in the format that is compliant with ISO 9660 Level 1 Level 2 or Joliet How are MP3 files recorded and played back MP3 files tracks can be recorded in folders in PC te
20. boulon R alisez les connexions lectriques Faire glisser l appareil dans le manchon jusqu ce qu il soit verrouill Attachez la plaque d assemblage Remarque Assurez vous que la partie encastr e est en bas Sinon le panneau de commande ne pourra pas tre ouvert compl tement Remonter le panneau de commande 1 Voordat u aan de montage van het apparaat begint Druk op LJ het bedieningspaneel vrijgeven als u het bedieningspaneel wilt loskoppelen indien dit aan de eenheid is vastgekoppeld Standaard wordt het bedieningspaneel bij het verlaten van de fabriek los verpackt meegeleverd 2 Verwijder de sierplaat 3 Verwijder het huis nadat u de klemmen hebt losgemaakt D Zet het apparaat rechtop Opmerking Wanneer u het apparaat rechtop zet moet u erop letten dat u de zekering aan de achterkant niet beschadigt Plaats de 2 hendels zoals afgebeeld tussen het apparaat en het huis om de klemmen los te maken Verwijder het huis Opmerking Bewaar de hendels nadat u het apparaat hebt geinstalleerd zodat u ze ook in de toekomst kunt gebruiken 4 Installeer het huis in het dashboard Nadat het huis op de juiste wijze in het dashboard is geplaatst moet u de palletjes zoals afgebeeld stevig op hun plaats duwen 5 Maak de bevestigingsbout aan de achterkant van het apparaat vast en plaats de rubberdop over het uiteinde van de bout 6 Breng de vereiste elektrische verbindingen tot stand 7 Schuif he
21. can use one of the following two methods to store broadcasting stations in memory Automatic preset of FM stations SSM Strong station Sequential Memory Manual preset of both FM and AM stations FM station automatic preset SSM You can preset 6 local FM stations in each FM band FM1 FM2 and FM3 T Select the FM band EM 3 you want to store FM stations into iud Each time you press the button the band changes as follows gt FM 1 gt FM 2 gt FM 3 gt F1 F2 F3 2 Press and hold both buttons for more than 2 seconds DISP SSM MODE EQ rock CLASSIC POPS HIP HOP JAZZ USER SSM appears then disappears when automatic preset is over Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected FM1 FM2 or FM3 These stations are preset in the number buttons No 1 lowest frequency to No 6 highest frequency When automatic preset is over the station stored in number button 1 will be automatically tuned in Ex Storing FM station of 88 3 MHz into the x o E o z H preset number 1 of the FM1 band Select the band FM1 3 AM you want to store stations into in this example FM1 Each time you press the button the band changes as NS follows gt FM 1 gt FM 2 FM3 AM F F2 F3 Tune in to a station in this example of 88 3 MHz r To tu
22. indicated by the arrow using a ball point pen or a similar tool 2 Remove the battery holder 2 Place the battery Slide the battery into the holder with the side facing upwards so that the battery is fixed in the holder 7 Lithium coin 2 battery product number CR2025 3 Return the battery holder Insert again the battery holder by pushing it until you hear a clicking sound back sid WARNING Store the battery in a place where children cannot reach If a child accidentally swallows the battery consult a doctor immediately Do not recharge short disassemble or heat the battery or dispose of it in a fire Doing any of these things may cause the battery to give off heat crack or start a fire Do not leave the battery with other metallic materials Doing this may cause the battery to give off heat crack or start a fire When throwing away or saving the battery wrap it in tape and insulate otherwise the battery may start to give off heat crack or start a fire Do not poke the battery with tweezers or similar tools Doing this may cause the battery to give off heat crack or start a fire CAUTION DO NOT leave the remote controller in a place such as dashboards exposed to direct sunlight for a long time Otherwise it may be damaged KD LH70R is equipped with the steering wheel remote control function If your car is equipped with the steering wheel remot
23. last selected PTY code appears 2 Select one of the twenty nine PTY 4 codes See page 19 Selected code name appears on the display Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset number you want T RPT 12 RND GS a SES Emm s amp 6 Selected preset number and MEMO memory appear alternately Press and hold T TP PTY for more than 2 seconds to exit from this mode TP PTY eo To search your favorite programme type If there is a station broadcasting a programme of the same PTY code as you selected that Se Press and hola T TP PTY for more station is tuned in than 2 seconds while listening to an f there is no station broadcasting a programme D i f th PTY lected th FM station of the same code as you selected the a station will not change TP PTY Note In some areas the PTY search will not work correctly en KN NH Other convenient RDS functions and adjustments EQ Rock CLASSIC POPS HIP HOP JAZZ USER The last selected PTY code appears 2 To select one of your favorite Automatic selection of the station programme type when using the number buttons es ES TORES ROND Usually when you press the number button the 4S dE eE ER ES SES BE GE is fined in S However when the preset station is an RDS station something different will happen If the or signals from that preset station a
24. shape like a heart or flower otherwise it will cause a malfunction Do not expose discs to direct sunlight or any heat source or place them in a place subject to high temperature and humidity Do not leave them in a car Do not use any solvent for example conventional record cleaner spray thinner benzine etc to clean discs Warped disc Sticker Sticker Sey EZ residue f lt Stick on Disc lt L label AUDIO AMPLIFIER SECTION Maximum Power Output Front 50 W per channel Rear 50W per channel Continuous Power Output RMS Front 19 W per channel into 4 Q 40 Hz to 20 000 Hz at no more than 0 8 total harmonic distortion Rear 19W per channel into 4 O 40 Hz to 20 000 Hz at no more than 0 8 total harmonic distortion Load Impedance 4 Q 4 Q to 8 Q allowance Tone Control Range Bass 10 dB at 100 Hz Treble x10 dB at 10 kHz Frequency Response 40 Hz to 20 000 Hz Signal to Noise Ratio 70 dB Line Out Level Impedance 2 0 V 20 kQ load full scale Output Impedance 1 KQ Subwoofer Out Level Impedance 2 0 V 20 kQ load full scale Cutoff frequency 120 Hz fixed TUNER SECTION Frequency Range FM 87 5 MHz to 108 0 MHz AM MW 522 kHz to 1 620 kHz LW 144 kHz to 279 kHz FM Tuner Usable Sensitivity 11 3 dBf 1 0 uV 75 Q 50 dB Quieting Sensitivity 16 3 dBf 1 8 uV 75 Q Alternate Channel Selectivity 400 kHz 65 dB Frequency Response 40 Hz to 15
25. than 2 seconds so that one of the PSM items appears on the display 2 Press P A or Y to select TU DISP tuner display 3 Turn the control dial to set to the desired indication PS NAME or FREQ 4 Press SEL select to finish the setting Note By pressing D DISP you can change the display while listening to an FM RDS station Each time you press the button the following information appears on the display Station name PS NAME Y Station frequency FREQ Y Programme type Then the display goes back to the original indication in several seconds Setting the TA volume level You can preset the volume level for TA Standby Reception When a traffic programme is received the volume level automatically changes to the preset level See also Changing the general settings PSM on page 32 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press P A orea wy to select TA VOL volume 3 Turn the control dial to set to the desired volume You can set it from VOL 00 to VOL 50 4 Press SEL select to finish the setting Automatic clock adjustment When shipped from the factory the clock built in this unit is set to be readjusted automatically using the CT Clock Time data in the RDS signal If you do not want to use automatic clock adjustment follow the procedure below See also Changi
26. the clock time for about 5 seconds N Adjust the minute RADIO OPERATIONS 6 x o o Z H OO O GE CBE ED 083 EZ Listening to the radio 2 start searching a station r To search stations of higher frequencies You can use either automatic searching or manual searching to tune in to a particular station Searching a station automatically 2 Auto search To search stations of lower frequencies T Select the band FM1 3 AM 4 When a station is received searching stops Each time you press the ms V button the band changes To stop searching before a station is received follows press the same button you have pressed for gt FM 1 gt FM 2 FM 3 gt AM searching F1 F2 F3 Selected band appears Ze D H H ia E mad EQ ROCK CLASSIC POPS HIP HOP JAZZ USER Lights up when receiving an FM stereo broadcast with sufficient signal strength When CLOCK is set to ON see page 34 the current indication will soon change to the clock time Note This receiver has three FM bands FM1 FM2 FM3 You can use any one of them to listen to an FM broadcast x o E o Z H 10 S 4B AMI Searching a station manually Manual search T Select the band FM1 3 AM DAB Each time you press the button the band changes as follows gt FM1 FM2 FM3
27. usting the sound When you adjust the bass treble or loudness the adjustment you have made is stored for the currently selected sound mode C EQ including USER 7 f you are using a two speaker system set the fader level to 00 7 Normally the control dial works as the volume control So you do not have to select VOL to You can adjust the sound characteristics to your preference I Select the item you want to adjust Each time you press the adjust the volume level button the adjustable items j change as follows 2 Adjust the setting LEN To increase the level or gue t the loud BAS TRE gt FAD gt Ua G Re bass treble fader balance S To decrease the level or VOL WOOFER lt LOUD lt volume subwoofer loudness turn off the loudness Indication To do Range DAG Adjust the bass 06 min 06 max TRE Adjust the treble 06 min Equalization pattern changes as you adjust the bass or treble 06 max Ex 1 When you adjust TRE treble FAD Adjust the front R06 Rear only and rear speaker balance F06 Front only BAL Adjust the left LO6 Left only and right speaker i balance RO6 Right only Ex 2 When you turn on the loudness LOUD Boostlow and high 3 Repeat steps 1 and 2 to adjust the frequencies to LOUD ON other items produce a well balanced sound LOUD OFF at low volume
28. v hicules quelques claquements ou autres bruits non d sir s risquent de se produire Si cela arrive raccorder la borne arri re de masse de l appareil au ch ssis de la voiture voir le diagramme de raccordement en utiliscant des cordons les plus gros et les plus courts possibles telle qu une barre de cuivre ou une tresse Si le bruit persiste consulter votre revendeur d autoradios JVC La puisscance admissible des enceintes devrait sup rieure 50 W l arri re et 50 W l avant avec une imp dance de 4 O 8 O S assurer de raccorder la mise la masse de cet appareil au ch ssis de la voiture Le dissipateur de chaleur devient tr s chaud apr s usage Faire attention de ne pas le toucher en retirant cet appareil Om kortsluiting te voorkomen adviseren wij u om de minpool van de accu los te maken en alle elektrische verbindingen tot stand te brengen voordat u het apparaat in de auto installeert Als u niet zeker weet hoe u dit apparaat moet installeren kunt u dit beter door een daartoe gekwalificeerde technicus laten doen Opmerking Dit apparaat mag worden gebruikt bij elektrische systemen die werken op 12 V gelijkstroom met negatieve aarding Als uw auto niet is uitgerust met een dergelijk systeem is een spanningsomzetter vereist Dit instrument kan worden aangeschaft bij JVC car audio dealers Vervang de zekering door een exemplaar met het aangegeven vermogen Als de zekering vaak doorslaat moet u uw JVC
29. wheel remote controller Anschlu8 an die Lenkradfernbedienung Connexion de la t l commande de volant Verbinden met de stuurwiel afstandsbediening If your car is equipped with the steering wheel remote controller you can operate this receiver using the controller To do it JVC s OE remote adapter not supplied which matches with your car is required Consult your JVC IN CAR ENTERTAINMENT dealer for details Wenn Ihr Fahrzeug mit einer Lenkradferndienung ausgestattet ist k nnen Sie damit diesen Receiver steuern Hierf r ist ein f r Ihr Fahrzeug passender Radio Lenkrad Fernbedienungsadaption von JVC nicht im Lieferumfang enthalten erforderlich F r weitere Einzelheiten wenden Sie sich an Ihren JVC Autoradioh ndler Si votre voiture est munie d une t l commande de volant vous pouvez commander cet autoradio en utilisant la t l commande Pour le faire un adaptateur pour t l commande au volant non fourni correspondant votre voiture est n cessaire Consultez votre revendeur d autoradio JVC pour les d tails Indien uw auto een stuurwiel afstandsbediening niet bijgeleverd heeft kunt u deze receiver met die afstandsbediening bedienen Hiervoor heeft u echter een JVC adapter nodig die geschikt is voor de stuurwiel afstandsbediening in uw auto Raadpleeg uw JVC car audio dealer voor details OE remote adapter not supplied Radio Lenkrad Fernbedienungsadaption nicht im Lieferumfang enthalten Adaptateur pour t l comm
30. 000 Hz Stereo Separation 30 dB Capture Ratio 1 5 dB MW Tuner Sensitivity 20 uV Selectivity 35 dB LW Tuner Sensitivity 50 uV SPECIFICATIONS CD PLAYER SECTION Type Compact disc player Signal Detection System Non contact optical pickup semiconductor laser Number of channels 2 channels stereo Frequency Response 5 Hz to 20 000 Hz Dynamic Range 96 dB Signal to Noise Ratio 98 dB Wow and Flutter Less than measurable limit MP3 decoding format MPEG1 2 Audio Layer 3 Max Bit Rate 320 Kbps GENERAL Power Requirement Operating Voltage DC 14 4 V 11 V to 16 V allowance Allowable Operating Temperature 0 C to 40 C Grounding System Negative ground Dimensions W x H x D Installation Size approx 182 mm x 52 mm x 150 mm Panel Size approx 188 mm x 58 mm x 12 mm Mass approx 1 4 kg excluding accessories Design and specifications are subject to change without notice I o E o z H 53 Having TROUBLE with operation Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb Bitte setzen Sie Ihr Gerat zur ck Siehe Seite Zur cksetzen des Ger ts Vous avez des PROBLEMES de fonctionnement R initialisez votre appareil R f rez vous la page intitul e Comment r initialiser votre appareil Hebt u PROBLEMEN met de bediening Stel het apparaat terug Zie de pagina met de paragraaf Het apparaat terugstellen VICTOR COMPANY OF JAP
31. 1 initial position to fuse position 2 and connect the red lead A7 to the positive battery terminal The yellow lead A4 is not used in this case S We recommend you to connect the JVC MP3 compatible CD changer You can also connect other CH X series CD changers except CH X99 and CH X100 Nous vous recommandons de connecter le changeur de CD compatible MP3 JVC Vous pouvez aussi connecter d autres changeurs de CD de la s rie CH X Wir empfehlen Ihnen den MP3 kompatiblen CD Wechsler von JVC anzuschlieBen Sie k nnen auch andere CD Wechsler der Serie CH X anschlieBen auBer Sluit bij voorkeur de JVC MP3 compatibele CD wisselaar aan U kunt tevens bepaalde andere CD wisselaars uit de CH X serie aansluiten uitgezonderd de CH X99 en CH X100 To steering wheel remote controller Changeur CD JVC Tuner You cannot use the KD MK series CH X99 und CH X100 sauf le CH X99 et le CH X100 U kunt CD wisselaars uit de KD MK see diagram RI DAB ou autre appareil CD changers with this unit CD Wechsler der Serie KD MK Vous ne pouvez pas utiliser les serie niet met dit toestel gebruiken An Lenkradfernbedienung ext rieur You can also use an external k nnen mit diesem Ger t nicht changeurs de CD de la s rie Het is ook mogelijk een extern verwendet werden Sie k nnen auch eine externe Komponente z B einen tragbaren MD Spieler verwenden wenn Sie den nicht zum Lieferumfang geh renden Line Einga
32. 17 18 19 20 I ATT standby on attenuator button Control dial SEL select button Display window A up button 10 button 4 eject button lt lt V m1 A buttons L I control panel release button T TP PTY traffic programme programme type button D DISP display button Also functions as SSM buttons when pressed together with M MODE button M MODE button Also functions as SSM buttons when pressed together with D DISP button FM AM DAB button CD CD CH CD changer button EQ equalizer button MO monaural button Number buttons RPT repeat button RND random button Remote sensor E To v down button 10 button Display window 21 Disc information indicators TAG ID3 Tag folder DH track file CD in indicator Main display Playback item indicators 9 disc folder Source clock display EQ equalizer indicator Sound mode C EQ custom equalizer indicators ROCK CLASSIC POPS HIP HOP JAZZ USER LOUD loudness indicator Tuner reception indicators MO monaural ST stereo RDS indicators AF REG TP PTY MP3 indicator Volume or audio level indicator Equalization pattern indicator Playback mode indicators RND random RPT repeat E 23 24 ES 26 27 Remote controller s O WVATT SOUND R SEH
33. 2 Verbinden Sie den Erdungsleiter mit der Karosserie oder dem Rahmen des Fahrzeugs Die Kntaktstelle darf nicht lackiert sein sollte die Kontaktstelle lackiert sein entfernen Sie den Lack der Kontaktstelle bevor Sie den Leiter befestigen Wenn der Erdungsleiter nicht ordnungsgem angeschlossen wird Y connector not supplied with this unit Y AnschluB nicht mit diesem Ger t mitgeliefert Connecteur Y non fourni avec cet appareil Y connector wordt niet bij dit apparaat geleverd To power aerial if any Zur Motorantenne sofern vorhanden Vers l antenne automatique s il y en a une Naar de antenne indien aanwezig LINE OUT rr ee GI gt a 9 REAR FRONT Front speakers Vordere Lautsprecher Enceintes avant Voorspeakers KD LH70R JVC Amplifier Front speakers 2 Attachez solidement le fil de mise la masse JVC Verst rker Vordere Lautsprecher au ch ssis m tallique de la voiture un JVC Amplificateur Enceintes avant endroit qui n est pas recouvert de peinture You can connect another power amplifier for front speakers Sie k nnen einen anderen Leistungsverstarker f r die vorderen Lautsprecher anschlie en Vous pouvez connecter un autre amplificateur de puissance pour les enceintes avant U kunt nog een eindversterker voor de voorspeakers aansluiten 25 kann dieses Ger t besch digt werden JVC Versterker Voorspeakers s il est recouvert de pe
34. AN LIMITED G2 EN GE FR NL 0103KKSMDTJEIN 2003 VICTOR COMPANY OF JAPAN LIMITED KD LH70R Installation Connection Manual Einbau Anschlufanleitung Manvel d installation raccordement Handleiding voor installatie aansluiting GET0129 004A E EX e SS QSL 0103KKSMDTJEIN EN GE FR NL ENGLISH DEUTSCH FRANCAIS NEDERLANDS This unit is designed to operate on 12 V DC NEGATIVE ground electrical systems INSTALLATION IN DASH MOUNTING Dieses Ger t ist f r einen Betrieb in elektrischen Anlagen mit 12 V Gleichstrom und Erdung ausgelegt EINBAU IM ARMATURENBRETT e Cet appareil est concu pour fonctionner sur des sources de courant continu de 12 V masse NEGATIVE INSTALLATION MONTAGE DANS LE TABLEAU DE BORD Dit apparaat mag worden gebruikt bij elektrische systemen die werken op 12 V gelijkstroom met negatieve aarding INSTALLATIE INBOUW IN HET DASHBOARD The following illustration shows a typical installation However you should make adjustments corresponding to your specific car If you have any questions or require information regarding installation kits consult your JVC IN CAR ENTERTAINMENT dealer or a company supplying kits Die folgende Abbildung zeigt einen typischen Einbau Dennoch m ssen Sie entsprechend Ihrem jeweiligen Auto Anpassungen vornehmen Bei irgendwelchen Fragen oder wenn Sie Informationen hinsichtlich des Einbausatzes brauchen wenden Sie sich an
35. JVC MU CD RECEIVER CD RECEIVER RECEPTEUR CD CD RECEIVER KD LH70R ENGLISH I eo Ku Ee H e FRANCAIS peus KEN QOD ake Tm OO O NEY COJE CSS ED EGE NEDERLANDS MIER DIGITAL AUDIO 72P JJ R D S PLAYBACK For installation and connections refer to the separate manual F r den Einbau und die Anschl sse siehe das eigenst ndige Handbuch Pour l installation et les raccordements se r f rer au manuel s par Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende handleiding INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D INSTRUCTIONS GEBRUIKSAANWIJZING GET0129 001A E EX x o E o z H Position And Reproduction Of Labels Bottom panel of the main unit CAUTION Invisible laser ADVARSEL Usynlig laser VARNING Osynlig laser VARO Avattaessa ja radiation when open and strling ved bning n r f str lning n r denna del ar suojalukitus ohitettaessa interlock failedor defeated sikkerhedsafbrydere er ude ppnad och sp rren r olet alttiina n kym tt C4 AVOID DIRECT EXPOSURE af funktion Undg uds t f Jurkopplad Betrakta ejf m lle lasers teilylle TO BEAM e telse for str ling d str len s A katso s teeseen f IMPORTANT FOR LASER PRODUCTS Precautions 1 CLASS 1 LASER PRODUCT 2 CAUTION Invisible laser radiation when ope
36. MO 9 10 T RPT 12 RND 333 ERCI ED G E 3 MO monaural Time countdown indicator lights up indicator To use these buttons for original functions again after pressing M MODE wait for 5 seconds without pressing any of these buttons until the functions mode is cleared MODE disappears from the display Pressing M MODE again also clears the functions mode Thank you for purchasing a JVC product Please read all instructions carefully before operation to ensure your complete understanding and to obtain the best possible performance from the unit CONTENTS How to reset your unit sss 2 How to use the M MODE button 2 LOCATION OF THE BUTTONS 4 Control panel 4 Remote controller 5 Preparing the remote controller 6 BASIC OPERATIONS 7 Turning on the power 7 Setting the clock 8 RADIO OPERATIONS 9 Listening to the radio 9 Storing stations in memory 11 Tuning in to a preset station 12 RDS OPERATIONS 13 What you can do with RDS 13 Other convenient RDS functions and adjustments eere 17 CD OPERATIONS 20 Playing a CD see 20 Locating a track or a particular portion N a e RE Selecting CD playback mode
37. Mobiltelefon Weitere informationen entnehmen Sie bitte der Bedienungscanleitung des Mobiltelefons Andere zur Lautsprecher connecteurs du ch ssis de la voiture peuvent tre diff rents en couleur 1 Connectez les fils de couleur du cordon d alimentation la batterie de la voiture aux enceintes et l antenne automatique s il y en a une dans l ordre suivant D Noir la masse Jaune la batterie de la voiture 12 V constant Rouge une borne accessoire Bleu avec bande blanche au fil de t l commande de l autre appareil ou l antenne automatique s il yen a une 200 mA max Orange avec bande blanche l interrupteur d clairage de la voiture Marron un syst me de t l phone cellulaire Pour les d tails se r f rer aux instructions du t l phone cellulaire kleur metde aansluitingen op het chassis van de auto 1 Sluit de gekleurde snoerdraden van de stroomkable in de hierna genoemde volgorde aan op de accu van de auto de luidsprekers en de antenne indien aanwezig Zwart aarde 2 Geel naar de accu van de auto constant 12 V 3 Rood naar de aansluitklem van de accessoire Blauw met witte streep naar afstandsdraad van andere apparatuur of antenne met circuit indien aanwezig 200 mA max Oranje met witte streep naar de schakelaar voor de autoverlichting Bruin naar het mobiele telefoonsysteem Lees voor meer informatie de instructies die bij de m
38. alling a service center Symptoms Causes Remedies Sound cannot be heard from the speakers The volume level is set to the minimum level Adjust it to the optimum level Connections are incorrect Check the cords and Disc is scratched connections o This unit does not work The built in microcomputer may While holding SEL select o at all have functioned incorrectly due press I ATT standby on to noise etc attenuator for more than 2 seconds to reset the unit The clock setting and preset stations stored in memory are erased See page 2 SSM Strong station Signals are too weak Store stations manually Sequential Memory z automatic preset does lt not work n Static noise while The aerial is not connected Connect the aerial firmly listening to the radio firmly Disc cannot be played Disc is inserted upside down Insert the disc correctly back CD R CD RW cannot be CD R CD RW is not finalized Insert a finalized CD R played back CD RW Tracks on the CD R CD Finalize the CD R CD RW RW cannot be skipped with the component which you used for recording Disc cannot be ejected Disc is locked Unlock the disc E See page 23 a Disc sound is sometimes You are driving on rough roads Stop playback while driving on 9 interrupted rough roads 5 Change the disc Connections are incorrect Chec
39. ande au volant non fourni Adapter voor stuurwiel afstandsbediening Steering wheel remote input Eingang f r Lenkradfernbedienung Entr e de la t l commande de volant Ingang stuurwiel afstandsbediening L niet bijgeleverd NUL ry KD LH70R Steering wheel remote controller equipped in the car Lenkradfernbedienung im Fahrzeug installiert T l commande de volant install e dans la voiture Stuurwiel afstandsbediening in de auto
40. appareil i Z ndschalter Rear ground terminal Aerial terminal Black Niet bij het apparaat inbegrepen Interrupteur d allumage Hintere AntennenanschluBklemme Schwarz To metallic body or chassis of the car g Ontstekingsschakelaar ErdungscanschluBklemme Borne de l antenne Noir Zur metallenen Karosserie oder zum Fahrwerk des Autos Q3 i A wart ops Ge 5 1 Borne arri re de masse Aansluitpunt antenne Vers corps m tallique ou ch ssis de la voiture gt I Massaklem aan de Naar metalen ondergrond of chassis van de auto M achterkant 2 3 Yellow To a live terminal in the fuse block connecting to the car battery i Z o bypassing the ignition switch Line out Zur einer stromf hrenden Anschlu klemme im Sicherungsblock PN By see diagram Ri To aerial zum AnschlieBen an die Autobatterie Umgehen des pw dni MC E NE Schutz kappen Zur Antenne 2 Zundschalters A l antenne Signalausgang siehe Schaltplan pl Sortie de ligne voir le diagramme Uitgang zie schema Ri A une borne sous tension du porte fusible connect e la batterie de la voiture en d rivant l interrupteur d allumage Naar een onder spanning staande aansluitklem in het zekeringblok die is aangesloten op de accu van de auto u passeert de ontstekingsschakelaar 7 To an accessory terminal in the fuse block E Naar de antenne Red Rot Zur einer Zubeh ranschluBklemme im Sicherungsblock L GE E 3 Vers borne accessoire du porte fusible Porte MT s
41. atically comes on You do not have to press OIMATT to turn on the power 43 x o l o z H 44 mAB DAB TUNER OPERATIONS We recommend that you use DAB Digital Audio Broadcasting tuner KT DB1500 or KT DB1000 with your unit If you have another DAB tuner consult your JVC IN CAR ENTERTAINMENT dealer Refer also to the Instructions supplied with your DAB tuner What is DAB system DAB is one of the digital radio broadcasting systems available today It can deliver CD quality sound without any annoying interference and signal distortion Furthermore it can carry text pictures and data In contrast to FM broadcast where each programme is transmitted on its own frequency DAB combines several programmes called services to form one ensemble In addition each service called primary service can also be divided into its components called secondary service With the DAB tuner connected with this unit you can enjoy these DAB services Note When reception switches between DAB and FM the listening volume level may increase or decrease inconveniently This change in the volume level results from unequal audio injection levels at broadcaster site but not from the malfunction of this unit To prevent this inconvenience you can adjust the DAB volume level See To adjust the DAB volume level on page 48 Tuning in to an ensemble and one of t
42. blitelephon A un syst me de t l phone cellulaire Naar het mobiele telefoonsysteem Brown Braun Marron Bruin White with black stripe B6 B5 White Gray with black stripe 64 63 Gray Green with black stripe B8 Green Purple with black stripe 82 B1 Purple WeiB mit schwarzem B6 B5 WeiB Grau mit schwarzem B4 B3 Grau Gr n mit schwarzem B8 B7 Gr n Lila mit schwarzem B2 Di GE Streifen Blanc Streifen Gris Streifen Vert Streifen lole Blanc avec bande noire C 4 Wit Gris avec bande noire 5 305 Grijs Vert avec bande noire ege Groen Violet avec bande noire s Paars Wit met zwarte streep Grijs met zwarte streep Groen met zwarte streep Paars met zwarte streep Left speaker front Right speaker front Left speaker rear Right speaker rear Linker Lautsprecher vorne Enceinte gauche avant Linkerspeaker voorin Rechter Lautsprecher vorne Enceinte droit avant Rechterspeaker voorin Linker Lautsprecher hinten Enceinte gauche arri re Enceinte droit arri re Linkerspeaker achterin Rechterspeaker achterin Rechter Lautsprecher hinten d SS Si Ge 0902 CH CH ci di de di d i PRECAUTIONS on power supply and speaker connections DO NOT connect the speaker leads of the power cord to the car battery otherwise the unit will be seriously damaged Connect the black lead ground yellow lead to car battery constant 12 V and red lead to an accessory
43. car audio dealer raadplegen Als u geluidsproblemen hebt De krachtschakeling van dit apparaat heeft een ingebouwd geluidsfilter In sommige voertuigen zijn tikgeluiden of andere ongewenste geluiden te horen Als dit gebeurt moet u de massaklem aan de achterkant zie aansluitingsschema aan het chassis van de auto vastmaken met behulp van een kortere en dikkere kabel zoals kopermanteldraad of tellerkabel Als het geluid niet verdwijnt moet u contact opnemen met uw JVC car audio dealer Het maximum ingangsvermogen van de speakers moet achterin meer dan 50 W zijn en voorin 50 W met een impedantie van 4 Q tot 8 Q Zorg ervoor dat dit apparaat door middel van een aardkabel is verbonden met het chassis van de auto De warmte opnemer kan na gebruik erg heet worden Raak de warmte opnemer niet aan wanneer u dit apparaat van zijn plaats haalt ENGLISH DEUTSCH FRANCAIS D Typical Connections Typische Anschl sse Raccordements typiques Normale verbindingen Before connecting Check the wiring in the vehicle carefully Incorrect connection may cause serious damage to this unit The leads of the power cord and those of the connector from the car body may be different in NEDERLANDS Alvorens de verbindingen tot stand te brengen Moet u de bedrading in de auto zorgvuldig Het apparaat kan door verkeerde verbindingen ernstige schade oplopen De draden van het stroomsnoer verschillen mogelijk van Avant de commencer la conn
44. chern wie in Fig 3 abgebildet anschlie en k nnen Ist die Lautsprecherverdrahtung in Ihrem Auto wie in Fig 3 abgebildet k nnen Sie das Ger t mit der Originalverdrahtung der Lautsprecher in Ihrem Auto anschlieBen Sind Sie sich ber die Lautsprecherverdrahtung in Ihrem Auto nicht sicher wenden Sie sich an Ihren Autoh ndler PRECAUTIONS sur l alimentation et la connexion des enceintes NE CONNECTEZ PAS les fils d enceintes du cordon d alimentation la batterie sinon l appareil serait s rieusement endommag Connectez correctement le fil noir a la masse le fil jaune a la batterie de la voiture 12 V constant et le fil rouge la prise accessoire AVANT de connecter les fils d enceintes du cordon d alimentation aux enceintes v rifiez le c blage des enceintes de votre voiture Si le c blage des enceintes de votre voiture est comme montr sur la Fig 1 ou Fig 2 ci dessous NE CONNECTEZ PAS l appareil en utiliscant ce c blage original des enceintes Si vous le faites l appareil sera s rieusement endommag Recommencez le cablage des enceintes de facon que vous puissiez connecter l appareil aux enceintes comme montr sur la Fig 3 Si le c blage des enceintes de votre voiture est comme montr sur la Fig 3 vous pouvez connecter l appareil en utiliscant ce c blage original d enceintes pour votre voiture Si vous n tes pas s rs du c blage d enceintes de votre voi
45. ct the DAB tuner 5 Press and hold the number button i in this example 1 you want to store MS Each time you press and hold AP the button the DAB tuner dnd Wo ed dis into for more the FM AM tuner are than 2 seconds alternately selected us DAB FM AM 2 Select the DAB band DAB1 DAB2 Selected band preset number and MEMO or DAB3 you want memory appear alternately for a while Ke Each time you press the BEEM gt button the DAB band changes as follows gt DAB 1 DAB2 DAB3 D1 D2 D3 6 Repeat the above procedure to store other DAB services into other preset 3 Tune in to an ensemble you want numbers Notes You can only preset primary DAB services If you store a secondary service its primary service will be stored instead A previously preset DAB service is erased when a new DAB service is stored in the same preset number Preset DAB services are erased when the power supply to the memory circuit is interrupted for example during battery replacement If this occurs preset the DAB services again 46 Tuning in to a preset DAB service You can easily tune in to a preset DAB service Remember that you must store services first If you have not stored them yet see Storing DAB services in memory on page 46 Before you start Press FM AM DAB briefly if CD CD changer or external component is the current source Select the DAB tuner uni Each time y
46. current folder or all files on the MP3 disc at random SE 1 Press M MODE to enter the functions mode while playing an MP3 disc MODE flashes on the upper part of the display ENGLISH MODE m RPT 2 Press RPT repeat while MODE is still flashing on the display so that TRK RPT or FLDR RPT appears on the display Each time you press the button the repeat play mode changes as follows rs TRK RPT gt FLDR RPT 12 RND 2 Press RND random while EEN MODE is still flashing on the display so that FLDR RND or DISC RND appears on the display Each time you press the button the random play mode changes as follows gt FLDR RND gt DISC RND Canceled lt Canceled RPT indicator Ex When you select TRK RPT EQ ROCK CLASSIC POPS HIP HOP JAZZ USER rae Active folder and RND indicators Mode indicator Plays repeatedly E EE CSR TRKRPT RPT indicator The current or lights up specified file Mode 4 grade Plays at random FLDR RPT ai and RPT All files of the E indicators current or FLDR RND ei and RND All files of the light up specified folder indicators current folder then light up files of the next folder and so on DISC RND eg and RND All files on the disc indicators light up 29 SOUND ADJUSTMENTS
47. d the same ID number is imprinted on the unit s chassis Keep the card in a safe place as it will help the authorities to identify your unit if stolen BEFORE USE For safely Do not raise the volume level too much as this will block outside sounds making driving dangerous Stop the car before performing any complicated operations Temperature inside the car If you have parked the car for a long time in hot or cold weather wait until the temperature in the car becomes normal before operating the unit x o o Z m LOCATION OF THE BUTTONS Control panel x o l o z H ol B w ro o j N gt 10 Display window lee 23 24 25 d al H e H 4 J eua MOST AFREG SI e SUD EQ Dr CLASSIC POPS HIP HOP JAZZ USER 26 27 28 29 30 31 33 1 12 3 A D N 2 Ls uve en TPIPTY __DISP SSM MODE DAB 3 MO g T RPT T2 RND CG 32 92 A oum ees aso E27 es 63 A M 8 9 10 11 12 13 14 15 16
48. e than 2 seconds so that one of the PSM items appears on the display PSM see page 33 2 Select AF REG alternative frequency regionalization reception if not shown on the display 3 Select the desired mode AE AF REG or OFF Using TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement TA from the current source another FM station CD or other connected components TA Standby Reception will not work if you are listening to an AM station Press T TP PTY to activate TA Standby Reception TP PTY m When the current source is FM the TP indicator either lights up or flashes f the TP indicator lights up TA Standby Reception is activated If a station starts broadcasting a traffic announcement TRAFFIC appears on the display and this unit automatically tunes in to the station The volume changes to the preset TA volume level see page 18 and the traffic announcement can be heard If the TP indicator flashes TA Standby Reception is not yet activated since the station being received does not provide the signals used for TA Standby Reception To activate TA Standby Reception you need to tune in to another station providing these signals Press gt gt A orke yw to search for such a station When a station providing these signals is tuned in the TP indicator stops flashing and remains lit Now TA Standby Reception is activated
49. e controller you can operate this unit using the controller See the Installation Connection Manual separate volume for connection to utilize this function BASIC OPERATIONS 27 Turning on the power I Turn on the power Ol ATT Note on One Touch Operation When you select a source in step 2 below the power automatically comes on You do not have to press this button to turn on the power 2 Select the source DAB To operate the tuner FM or AM see pages 9 19 To play a CD see pages 20 23 To play an MP3 disc See pages 24 29 To operate the CD changer See pages 38 42 To operate the external component LINE IN see page 43 To operate the DAB tuner See pages 44 48 3 Adjust the volume S xd To increase the volume To decrease the volume Volume level appears EQ ROCK CLASSIC POPS HIP HOP JAZZ USER EN HI Volume or audio level indicator see page 34 4 Adjust the sound as you want See pages 30 and 31 To drop the volume in a moment Press amp I ATT briefly while listening to any source ATT starts flashing on the display and the volume level will drop in a moment To resume the previous volume level press the button briefly again f you turn the control dial you can also restore the sound To turn off the power Press and hold 1 ATT for more than one Second SEE YOU
50. e tabs to hold the sleeve firmly in place as illustrated 5 Fix the mounting bolt to the rear of the unit s body and place the rubber cushion over the end of the bolt 6 Do the required electrical connections 7 Slide the unit into the sleeve until it is locked 8 Attach the trim plate Note Ensure the recessed part is at the bottom If not the control panel will not open completely 9 Attach the control panel 1 Vor dem Einbau Dr cken Sie Ly Freigabe der Schalttafel um die Arretierung der Schalttafel zu l sen sofern diese bereits angebracht ist Bei der Auslieferung ab Werk ist die Schalttafel im Etui verpackt Den Frontrahmen herausnehmen Die Halterung nach dem Entriegeln der Halterungensperren abnehmen CD Das Ger t aufstellen Hinweis Beim Aufstellen des Ger ts darauf achten daB die Sicherung auf der R ckseite nicht besch digt wird Die 2 Griffe zwischen dem Ger t und der Halterung wie abgebildet einstecken und die Halterungensperren entriegeln Die Halterung entfernen Hinweis Sicherstellen da die Griffe f r k nftigen Gebrauch nach dem Einbau des Ger ts aufbewahrt werden Die Halterung im Armaturenbrett einbauen Nach dem korrekten Einbau der Halterung im Armaturenbrett die entsprechenden Riegel umknicken um die Halterung an ihrem Platz zu sichern siehe Abbildung 5 Die Befestigungsschraube an der R ckseite des Ger tek rpers befestigen und das Ende der Schra
51. ears instead of the clock display except when LINE IN is selected as the source When CLOCK is set to OFF Current F Source indication Pressing D DISP Tuner Band Clock appears for about CD and CD or 5 seconds CD CH disc number When CLOCK is set to ON Current 2 Source Pressing D DISP indication gb Tuner Clock Band appears for about 5 seconds CD and Clock CD or disc number and CD CH track file number appear alternately each time you press the button To select the level meter LEVEL You can select the level display according to your preference When shipped from the factory AUDIO 2 is selected AUDIO 1 Shows the audio level indicator AUDIO2 Alternates AUDIO 1 setting and illumination display OFF Erases the audio level indicator To select the dimmer mode DIMMER When you turn on the car headlights the display automatically dims Auto Dimmer When shipped from the factory Auto Dimmer mode is activated AUTO Activates Auto Dimmer OFF Cancels Auto Dimmer ON Always dims the display Note Auto Dimmer equipped with this unit may not work correctly on some vehicles particularly on those having a control dial for dimming In this case set the dimmer mode to ON or OFF To select the telephone muting TEL This mode is used when a cellular phone system is connected Depending on the phone system used select eit
52. ears on the display Each time you press the button disc random play mode turns on and off alternately EQ Rock CLASSIC POPS HIPHOP JAZZ USER rest disc and RND indicators When disc random play is turned on the amp and RND indicators light up on the display A track randomly selected starts playing To play back tracks repeatedly Track Repeat Play You can play back the current track repeatedly ene 1 Press M MODE to enter the functions mode while playing a CD MODE flashes on the upper part of the display Sien 2 Press RPT repeat while MODE is still flashing on the display so that TRK RPT appears on the display Each time you press the button track repeat play mode turns on and off alternately EQ ROCK CLASSIC POPS HIP HOP JAZZ USER H RPT indicator When track repeat play is turned on the RPT indicator lights up on the display The current track starts playing repeatedly Playing a CD Text Prohibiting disc ejection In a CD Text some information about the disc its disc title performer and track title is recorded This CD Text information will be shown automatically when you play a CD Text To change the CD Text information manually select text display mode while playing a CD Text pud Each time you press the button the display changes as follows Disc title performer Y Track title 43 lights up on the display Y Elapsed playing time a
53. ecorded on the disc MP3 flashes on the display The current folder does not contain any MP3 file Select another folder NO FILES appears on the display The current disc does not contain any MP3 file Insert a disc that contains MP3 files Correct characters are not displayed e g album name This unit can only display alphabets capital A Z numbers and a limited number of symbols Symptoms Causes H Remedies as NO DISC appears on the display No disc is in the magazine Insert discs into the magazine Discs are inserted upside down Insert discs correctly NO MAG appears on the display No magazine is loaded in the CD changer Insert the magazine RESET 8 appears on the display This unit is not connected to the CD changer correctly Connect this unit and the CD changer correctly and press the reset button of the CD changer RESET 1 RESET 7 appears on the display Press the reset button of the CD changer The CD changer does not work at all The built in microcomputer may function incorrectly due to noise etc While holding SEL select press I ATT standby on attenuator for more than 2 seconds to reset the unit The clock setting and preset stations stored in memory are erased See page 2 CD Changer About mistracking Mistracking may result from d
54. eispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Ger t an seinem Platz einbauen Par exemple dans une Toyota retirer d abord l autoradio et installer l appareil la place Voorbeeld Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren Flat type screws M5 x 6 mm Senkkopfschrauben M5 x 6 mm 27b Vis t te plate M5 x 6 mm gt Platkopschroeven M5 x 6 mm N Not included with this unit Nicht Teil dieses Ger ts Non fourni avec cet appareil Halterung Boulon de montage Manchon Bevestigingsbout Huis Install the unit at an angle of less Note AB than 30 Less than 30 A LEE Stellen Sie das Ger t mit einem Hinweis Weniger als 30 Q Winkel von weniger als 30 auf Moins de 30 Installez l appareil avec un angle Remarque Kleiner dan 30 de moins de 30 A nstalleer het toestel met een hoek Opmerking kleiner dan 30 Bracket Niet meegeleverd Konsole A Support Console are Flat type screws M5 x 6 mm P Senkkopfschrauben M5 x 6 mm cepe um 2 Vis t te plate M5 x 6 mm Pocket Platkopschroeven M5 x 6 mm Taschen Bracket Poche racket Konsole Zak A Support Console When installing the unit on the mounting bracket make sure to use the 6 mm long screws If longer screws are used they could damage the unit Beim Anbringen des Ger t an der Konsole sicherstellen da 6 mm lange Schrauben verwe
55. er von JVC Changeur CD JVC JVC CD wisselaar DA KD LH70R You can connect both components in series as illustrated above Es ist m glich beide Komponenten in einer Serienschaltung entsprechend der obigen Darstellung anzuschlieBen Vous pouvez connecter les deux appareils en s rie comme montr ci dessus Beide apparaten zijn volgens bovenstaande illustratie in serie aan te sluiten External Component Externe Komponente Appareil ext rieur Extern apparaat Line Input Adapter KS U57 not supplied with this unit Line Eingangsadapter KS U57 nicht mit diesem Ger t mitgeliefert Adaptateur d entr e de ligne KS U57 non fourni avec cet appareil Line Input Adapter KS U57 wordt niet bij dit apparaat geleverd KD LH70R CD changer jack Buchse f r CD Wechsler Prise du changeur CD Aansluiting voor CD wisselaar rij Signal cord not supplied with this unit Einzelleitung nicht mit diesem Ger t mitgeliefert Cordon de signal non fourni avec cet appareil Signaalkabel wordt niet bij dit apparaat geleverd External component Externe Komponente Appareil ext rieur Extern apparaat Vous pouvez connecter un changeur CD JVC et ou un tuner DAB Digital Audio Broadcasting JVC Pour leurs connexions r f rez vous aux modes d emploi qui les accompagnent Het is mogelijk een JVC CD wisselaar en of JVC DAB tuner Digital Audio Broadcasting aan te sluiten Zie de
56. esponding to the track number to start its playback slot The source changes to the previously selected source If you change the source CD play also stops without ejecting the CD Next time you select CD as the source CD play starts from where playback has been stopped previously 7 EQ 8 T RPT 12 RND S To select a track number from 1 6 Press 1 7 6 12 briefly To select a track number from 7 12 x o E o z H Press and hold 1 7 6 12 for more than Notes one second f the ejected disc is not removed for about 15 seconds the disc is automatically inserted again into the loading slot to protect it from dust Disc play will not start this time Youcan eject the disc even when the unit is turned off Locating a track or a particular portion on a CD To goto a track quickly 10 and 10 buttons 1 Press M MODE to enter the functions mode while playing a CD Mope MODE flashes on the upper part of the display 2 Press 10 or 10 To fast forward or reverse the track E to the last track The first time you press 10 or 10 button the track skips to the nearest higher or lower track with a track number of multiple ten ex 10th 20th 30th Then each time you press the button you can skip 10 tracks see How to use the 10 and 10 buttons on page 22 After the last track the first track will be selected and vice versa Press
57. exion V rifiez attentivement le c blage du v hicule Une connexion incorrecte peut endommager s rieusement l appareil Le fil du cordon d alimentation et ceux des Vor dem AnschlieBen Die Verdrahtung im Fahrzeug sorgf ltig berpr fen Falsche Anschl sse k nnen ernsthafte Sch den am Ger t hervorrufen Die Leiter des Stromkabels und die Leiter des Anschlusses im Fahrzeug k nnen sich farblich unterscheiden color 1 Connect the colored leads of the power cord to the car battery speakers and power aerial if any in the following sequence D Black ground 2 Yellow to car battery constant 12 V 3 Red to an accessory terminal Blue with white stripe to remote lead of other equipment or power aerial if any 200 mA max Orange with white stripe to car light control switch Brown to cellular phone system For details refer to the instructions of the cellular phone Others to speakers 2 Connect the aerial cord 1 Die arbigen Leitungen des Spannunsgversorgungskabels an der Autobatterie ontstekingsschakelaarden Lautsprechern und dem Motorantenne sofern vorhanden in folgender Reihenfolge anschlieBen D Schwarz Erdung Gelb an Autobatterie konstant 12 V 3 Rot zur einer Zubeh ranschluBklemme Blau mit wei em Streifen zum Zusatzkabel des anderen Ger ts oder der Motorantenne sofern vorhanden max 200 mA Orange mit wei em Streifen zum Autolichtschalter 6 Braun an
58. he beginning of the previous tracks files is located and played back 39 x o E o Z H 40 This operation is only possible when using JVC MP3 compatible CD changer CH X1500 To go to a track file quickly 10 and 10 buttons 1 Press M MODE to enter the functions mode while playing a disc MODE MODE flashes on the upper part of the display 2 Press 10 or 10 S To skip 10 tracks files forwards to the last track file n E bn To skip 10 tracks files backwards to the first track file The first time you press 10 or 10 button the track file skips to the nearest higher or lower track file with a track file number of multiple ten ex 10th 20th 30th Then each time you press the button you can skip 10 tracks files see How to use the 10 and 10 buttons below After the last track file the first track file will be selected and vice versa Note If the current playing disc is an MP3 disc files are skipped within the same folder How to use the 10 and 10 buttons Ex 1 To select track file number 32 while playing track file number 6 ES NIS Three times Twice Track File6 10 20 gt 30 et 31 32 Ex 2 To select track file number 8 while playing track file number 36 MODE R eR Three times Track File 36 30 20 10 gt 9 8 Twice To skip to the next or previous folde
59. he services A typical ensemble has 6 or more programmes services broadcast at the same time After tuning in to an ensemble you can select a service you want to listen to Before you start Press FM AM DAB briefly if CD CD changer or external component is the current source 1 Select the DAB tuner DAB Each time you press and hold the button the DAB tuner and the FM AM tuner are alternately selected DAB lt gt FM AM 2 Select the DAB band DAB1 DAB2 or DAB3 S Each time you press the button the DAB band changes as follows gt DAB1 DAB2 DAB3 D1 D2 D3 Note This receiver has three DAB bands DABI DAB2 DAB3 You can use any of them to tune in to an ensemble CAE 3 start searching for an ensemble To change the display information while tuning in to an ensemble I Press gt A to search Ka for ensembles of higher Normally service name is shown on the display m frequency If you want to check the ensemble name or its 9 X frequency press D DISP Im ped Each time you press the Press L a v to search button the following for ensembles of lower information appears for a while frequency on the display When an ensemble is received searching Y stops Service name Y To stop searching before an ensemble is Ensemble name received press the same button you have i pressed for searching Channel number Y 4 Select a service either primary or
60. her MUTING 1 or MUTING 2 whichever mutes the sounds from this unit When shipped from the factory this mode is deactivated MUTING 1 Select this if this setting can mute the sounds MUTING 2 Select this if this setting can mute the sounds OFF Cancels the telephone muting To turn on off the key touch tone BEEP You can deactivate the key touch tone if you do not want it to beep each time you press a button When shipped from the factory the key touch tone is activated ON OFF Activates the key touch tone Deactivates the key touch tone To select the scroll mode SCROLL You can select the scroll mode for the disc information when the entire text cannot be shown all at once When shipped from the factory scroll mode is set to ONCE ONCE Scrolls only once AUTO Repeats the scroll 5 second intervals in between OFF Cancels scroll mode Note Even if the scroll mode is set to OFE you can scroll the display by pressing D DISP for more than one second To select the external component to use EXT IN You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS U57 not supplied To use the external component as the playback Source through this unit you need to select which component CD changer or external component to use When shipped from the factory CD changer is selected as the external component
61. ihren JVC Autoradiohandler oder ein Unternehmen das diese Einbaus tze vertreibt Lillustration suivante est un exemple d installation typique Cependant vous devez faire les ajustements correspondant votre voiture particuli re Si vous avez des questions ou avez besoin d information sur des kits d installation consulter votre revendeur d autoradios JVC ou une compagnie d approvisionnement Op de volgende afbeelding kunt u zien hoe de installatie normaal gesproken in zijn werk gaat U moet echter bij de installatie rekening houden met de bijzonderheden van uw eigen auto Neem bij vragen of voor meer bijzonderheden over inbouwpakketten contact op met uw JVC car audio dealer of een dealer of een bedrijf dat inbouwpakketten levert 1 Betore mounting Press Ly control panel release button to detach the control panel if already attached When shipped from the factory the control panel is packed in the hard case Remove the trim plate Remove the sleeve after disengaging the sleeve locks D Stand the unit Note When you stand the unit be careful not to damage the fuse on the rear Insert the 2 handles between the unit and the sleeve as illustrated to disengage the sleeve locks Remove the sleeve Note Be sure to keep the handles for future use after installing the unit Install the sleeve into the dashboard After the sleeve is correctly installed into the dashboard bend the appropriat
62. iles of the indicators current or light up specified folder of the current disc DISC RPT ei and RPT All tracks files of indicators light the current or up specified disc FLDR RPT is only applicable for MP3 discs EXTERNAL COMPONENT OPERATIONS ENGLISH KEE O O OD Co CE C33 E27 C359 EDGE Playing an external component 2 Turn on the connected component and start playing the source You can connect the external component to the CD changer jack on the rear using the Line Input 3 Adjust the volume Adapter KS U57 not supplied Preparations For connecting the Line Input Adapter KS U57 and the external component refer to the Installation Connection Manual separate volume Before operating the external component using the following procedure select the external input correctly See To select the external component to 4 Adjust the sound characteristics use EXT IN on page 35 you want See pages 30 and 31 I Select the external component LINE IN mu B gt LINE al EQ Rock CLASSIC POPS HIP HOP JAZZ USER Ex When you select LINE IN as the source If LINE IN does not appear on the display see page 34 and select the external input LINE IN Displayed only when one of the following sources is selected FM AM and CD Note on One Touch Operation When you press CD CD CH the power autom
63. instructies van deze apparaten voor meer informatie over het tot stand brengen van deze aansluiting Connecting cord supplied with your DAB tuner or CD changer Verbindungskabel das zum Lieferumfang des DAB Tuners oder CD Wechslers geh rt Cordon de connexion fourni avec votre tuner DAB ou changeur CD Verbindingskabel die met de DAB tuner of CD wisselaar wordt meegeleverd JVC DAB tuner or JVC CD changer DAB Tuner von JVC oder CD Wechsler von JVC Tuner DAB JVC ou Changeur CD JVC JVC DAB tuner of JVC CD wisselaar KD LH70R CAUTION VORSICHT PRECAUTION LET OP Before connecting the CD changer and or the DAB tuner make sure that the unit is turned off Bevor Sie den CD Wechsler und oder den DAB Tuner anschlieBen vergewissern Sie sich daB das Ger t ausgeschaltet ist e Avant de connecter le changeur CD et ou le tuner DAB s assurer que l unit est teinte Zorg ervoor dat de apparaat is uitgeschakeld alvorens u de en of DAB tuner CD wisselaar aansluit Subwoofer Subwoofer Caisson de grave Subwoofer Signal cord not supplied with this unit Einzelleitung nicht mit diesem Ger t mitgeliefert Cordon de signal non fourni avec cet appareil Subwoofer Signaalkabel wordt niet bij dit apparaat geleverd Subwoofer Caisson de grave Subwoofer JVC Amplifier KD LH70R a i JVC Verstarker JVC Amplificateur IS lt a Lk JVC Versterker SUBWOOFER Connecting to the steering
64. inture enlevez d abord la peinture avant d attacher le fil Lappareil peut tre endommag si cela n est pas fait correctement 2 Bevestig de aardedraad goed met een metalen onderdeel of het chassis van de auto bevestig op een niet gelakt gedeelte indien gelakt schuur dan af alvorens de draad te bevestigen Het toestel kan worden beschadigd indien de aardedraad niet goed is aangesloten CD changer and DAB tuner CD Wechsler und DAB Tuner Changeur CD et tuner DAB CD wisselaar en DAB tuner Sie k nnen einen CD Wechsler und oder einen DAB Tuner Tuner f r digitalen Rundfunk von JVC anschlieBen e Weitere Informationen ber den Anschlu k nnen Sie der Bedienungscanleitung entnehmen die dem jeweiligen Ger t beiliegt You can connect a JVC CD changer and or a JVC DAB Digital Audio Broadcasting tuner For their connections refer to the instructions supplied with them Connecting cord supplied with your DAB tuner Verbindungskabel das zum Lieferumfang des DAB Tuners geh rt Cordon de connexion fourni avec votre tuner DAB Verbindingskabel die met de DAB tuner wordt meegeleverd Connecting cord supplied with your CD changer Verbindungskabel das zum Lieferumfang des CD Wechsler geh rt Cordon de connexion fourni avec votre changeur CD Verbindingskabel die met de CD wisselaar wordt meegeleverd JVC DAB tuner DAB Tuner von JVC Tuner DAB JVC JVC DAB tuner JVC CD changer CD Wechsl
65. ion You can select the different modes of network tracking reception to continue listening to the same programme in its finest reception When shipped from the factory AF is selected AF Network Tracking Reception is activated with Regionalization set to off With this setting the unit switches to another station within the same network when the receiving signals from the current station become weak In this mode the programme may differ from the one currently received The AF indicator lights up but the REG indicator does not AF REG Network Tracking Reception is activated with Regionalization set to on With this setting the unit switches to another station within the same network broadcasting the same programme when the receiving signals from the current station become weak Both the AF indicator and the REG indicator light up OFF Network Tracking Reception is deactivated Neither the AF indicator nor the REG indicator lights up AF indicator H REG indicator AFREG EQ ROCK CLASSIC POPS HIPHOP JAZZ USER Note If a DAB tuner is connected and Alternative Reception for DAB services is activated Network Tracking Reception AF is also activated automatically On the other hand Network Tracking Reception cannot be deactivated without deactivating Alternative Reception See page 48 13 x o o z H 14 eco T Press and hold SEL select for mor
66. k om uw autostereosysteem uit te breiden met een versterker of andere apparatuur Verbind de externe kabel blauw met witte streep met de externe kabel van het andere apparatuur zodat deze op afstand vanaf deze apparaat kan worden bediend Alleen voor een versterker Verbind de uitgang van het apparaat met de ingang van de versterker Koppel de speakers van dit apparaat los en verbind ze aan de versterker Gebruik de speakerdraden van dit apparaat niet Plak de aansluitklemmen van deze speakerdraden met isolatieband af zoals hierboven is afgebeeld Amplifier Verst rker Amplificateur Versterker Rear speakers Hintere Lautsprecher Enceintes arri re Achterspeakers JVC Amplifier JVC Verst rker JVC Amplificateur JVC Versterker Remote lead Fernbedienungsleitung Fil d alimentation distance Externe kabel INPUT ci b re L gt lt Blue with white stripe Blau mit weiBem Streifen Bleu avec bande blanche Blauw met witte streep Signal cord not supplied with this unit Einzelleitung nicht mit diesem Ger t mitgeliefert Cordon de signal non fourni avec cet appareil Signaalkabel wordt niet bij dit apparaat geleverd gt 4 2 Firmly attach the ground wire to the metallic body or to the chasis of the car to the place not coated with paint if coated with paint remove the paint before attaching the wire Failure to do so may cause damage to the unit
67. k the cords and connections NO DISC appears on the display No disc in the loading slot Insert a disc into the loading slot Disc is inserted incorrectly Insert the disc correctly 49 x o E o z H 50 2 Symptoms Causes Remedies MP3 Playback Disc cannot be played back No MP3 files are recorded on the disc Change the disc MP3 files do not have the extension code mp3 in their file names Add the extension code mp3 to their file names MP3 files are not recorded in the format compliant with ISO 9660 Level 1 Level 2 or Joliet Change the disc Record MP3 files using a compliant application Noise is generated The file played back is not an MP3 file although it has the extension code mp3 Skip to another file or change the disc Do not add the extension code mp3 to non MP3 files A longer readout time is required CHECK keeps flashing on the display Readout time varies due to the complexity of the folder file configuration Do not use too many hierarchies and folders Also do not record any other types of audio tracks together with MP3 files Files cannot be played back as you have intended them to play Playback order is determined when the files are recorded Elapsed playing time is not correct This sometimes occurs during play This is caused by how the files are r
68. level To reset each sound mode to the factory WOOFER Adjust the 0 min settings repeat the same procedure and subwoofer output reassign the preset values listed in the table on level 8 max page 30 VOL Adjust the volume 00 min 50 max 31 OTHER MAIN FUNCTIONS Changing the general settings 3 adjust the Psm item selected PSM You can change the items listed in the table on the next page by using the PSM Preferred Setting Mode control x o o zZ H Basic Procedure T Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary 5 Finish the setting 2 Select the PSM item you want to adjust See page 33 EQ E Q Rock CLASSIC POPS HIP HOP JAZZ USER E Ex When you select LEVEL 32 Preferred Setting Mode PSM items For detailed operations of each PSM items refer to the pages listed in the table Indications Selectable values items _ F ctory preset settings ENGLISH See page CLOCK H Hour adjustment Back Advance CLOCK M Minute adjustment Back Advance 24H 12H 24 12 hour time display 12H 24H AUTO ADJ Automatic clock setting OFF ON ON CLOCK Clock display OFF ON ON TU DISP Tuner display FREQ PS NAME PS NAME AF REG Alterna
69. ll sein die hintere ErdungscanschluBklemme siehe Schaltplan des Ger ts am Fahrwerk des Fahrzeugs anschlieBen dabei k rzere und dickere Kabel wie beispielsweise Kupfergeflechtdraht oder Stahldraht verwenden Bleibt St rger usch bestehen wenden Sie sich an Ihren JVC Autoradiohandler Die maximale Eingangsleistung der Lautsprecher sollte mehr als 50 W hinten und 50 W vorn bei einer Impedanz von 4 Q bis 8 Q betragen Sicherstellen daB das Ger t am Fahrwerk geerdet wird Das Abstrahlblech wird nach dem Gebrauch sehr heiB Beim Ausbau des Ger ts darauf achten das Abstrahlblech nicht zu ber hren Pour viter tout court circuit nous vous recommandons de d brancher la borne n gative de la batterie et d effectuer tous les raccordements lectriques avant d installer l appareil Si l on n est pas s r de pouvoir installer correctement cet appareil le faire installer par un technicien qualifi Remarque Cet appareil est concu pour fonctionner sur des sources de courant continu de 12 V masse NEGATIVE Si votre v hicule n offre pas ce type d alimentation il vous faut un convertisseur de tension que vous pouvez acheter chez un revendeur d autoradios JVC Remplacer le fusible par un de la valeur pr cis e Si le fusible saute souvent consulter votre revendeur d autoradios JVC e Si le bruit est un probl me Cet appareil incorpore un filtre de bruit dans le circuit d alimentation Cependant avec certains
70. n es de commande Huis Sierplaat Stroomkabel Hendels Behuizing Bedieningspaneel Washer 05 Lock nut M5 Mounting bolt M5 x 20 mm Rubber cushion Battery Remote controller Unterlegscheibe 25 Sicherungsmutter M5 e Befestigungsschraube M5 x 20 mm Gummipuffer 9 Batterie Cy Fernbedienung Rondelle 25 Ecrou d arr t M5 Sy Boulon de montage M5 x 20 mm cap Amortisseur en caoutchouc O Pile T l commande Sluitring 95 Contra moer M5 M Bevestigingsbout M5 x 20 mm Rubberdop Batterij CR2025 Afstandsbediening ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHL SSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN To prevent short circuits we recommend that you disconnect the battery s negative terminal and make all electrical connections before installing the unit If you are not sure how to install this unit correctly have it installed by a qualified technician Note This unit is designed to operate on 12 V DC NEGATIVE ground electrical systems If your vehicle does not have this system a voltage inverter is required which can be purchased at JVC IN CAR ENTERTAINMENT dealers Replace the fuse with one of the specified rating If the fuse blows frequently consult your JVC IN CAR ENTERTAINMENT dealer If noise is a problem This unit incorporates a noise filter in the power circuit However with some vehicles clicking or other unwanted noise may occur If this happens connect the unit s rear ground termi
71. n and interlock failed or defeated Avoid direct exposure to beam 3 CAUTION Do not open the top cover There are no user serviceable parts inside Leave all servicing to qualified service personnel 4 CAUTION This CD player uses invisible laser radiation and is equipped with safety switches to prevent Name Rating plate CLASS LASER PRODUCT Caution radiation emission when unloading CDs It is This product contains a laser component dangerous to defeat the safety switches of higher laser class than Class 1 5 CAUTION Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure How to reset your unit OI UATT standby on attenuator While holding SEL select press I ATT standby on attenuator for more than 2 seconds This will reset the built in microcomputer Note Your preset adjustments such as preset channels sound adjustments or names assigned to CDs will also be erased KEE BB OOW SEL select How to use the M MODE button If you press M MODE the unit goes into functions mode MODE flashes on the upper part of the display While in functions mode the number buttons and A Y buttons work as different function buttons Ex When number button 2 works as MO monaural button MODE V uo EQ nock CLASSIC POPS HIP HOP JAZZ USER 7 EQ 8
72. n de l appareil Verwijderen van het apparaat Voordat u het apparaat verwijdert moet u het achtergedeelte losmaken Verwijder het bedieningspaneel 2 Verwijder de sierplaat Plaats de 2 hendels zoals afgebeeld in de sleuven Daarna duwt u de hendels zachtjes uit elkaar en kunt u het apparaat naar buiten schuiven Bewaar de hendels nadat u het apparaat hebt geinstalleerd Bedieningspaneel Control panel A Schalttafel Panneau de commande 2 Trim plate Frontrahmen Sierplaat Plaque d assemblage 3 Handle Griff Poign e Hendel Parts list for installation and connection The following parts are provided with this unit After checking them please set them correctly Teileliste f r den Einbau und Anschluf Die folgenden Teile werden zusammen mit diesem Ger t geliefert Nach ihrer Uberpr fung die Teile richtig einsetzen Liste des pi ces povr l installation et raccordement Les pi ces suivantes sont fournies avec cet appareil Apr s v rification veuillez les placer correctement Lijst van onderdelen die u bij installatie en aansluiting nodig hebt De volgende onderdelen worden bij het apparaat geleverd Installeer ze op de juiste wijze nadat u ze hebt gecontroleerd EN Hard case Control panel Sleeve Trim plate Power cord Handles Etui Schalttafel Halterung Frontrahmen Stromkable Griffe Etui de transport Panneau Manchon Plaque d assemblage Cordon d alimentation Poig
73. nal see connection diagram to the car s chassis using shorter and thicker cords such as copper braiding or gauge wire If noise still persists consult your JVC IN CAR ENTERTAINMENT dealer Maximum input of the speakers should be more than 50 W at the rear and 50 W at the front with an impedance of 4 Q to 8 Q Be sure to ground this unit to the car s chassis The heat sink becomes very hot after use Be careful not to touch it when removing this unit Heat sink Abstrahlblech Lo D Dissipateur de chaleur Warmte opnemer Zur Vermeidung von Kurzschl ssen empfehlen wir da Sie den negativen BatterieanschluB abtrennen und alle elektrischen Anschl sse herstellen bevor das Ger t eingebaut wird Sind Sie sich ber den richtigen Einbau des Ger ts nicht sicher lassen Sie es von einem qualifizierten Techniker einbauen Hinweis Dieses Ger t ist f r einen Betrieb in elektrischen Anlagen mit 12 V Gleichstrom und Erdung ausgelegt Verf gt Ihr Fahrzeug nicht ber diese Anlage ist ein Spannungsinverter erforderlich der bei JVC Autoradiohandler erworben werden kann Die Sicherung mit einer der entsprechenden Nennleistung ersetzen Brennt die Sicherung h ufig durch wenden Sie sich an ihren JVC Autoradiohandler e Sind St rgerausche ein Problem Dieses Ger t enth lt ein St rfilter im Stromkreis Bei manchen Fahrzeugen kann jedoch ein Klicken oder andere unerw nschte St rger usche auftreten Sollte das der Fa
74. names as well as information about what type of programme they broadcast Such as sports or music etc Another advantage of RDS function is called Enhanced Other Networks By using the Enhanced Other Networks data sent from a station you can tune in to a different station of a different network broadcasting your favorite programme or traffic announcement while listening to another programme or to another source such as CD By receiving the RDS data this unit can do the following Tracing the same programme automatically Network Tracking Reception Standby Reception of TA Traffic Announcement or your favorite programme PTY Programme Type search Programme search And some other functions Tracing the same programme automatically Network Tracking Reception When driving in an area where FM reception is not good the tuner built in this unit automatically tunes in to another RDS station broadcasting the same programme with stronger signals So you can continue to listen to the same programme in its finest reception no matter where you drive See the illustration on page 19 Two types of the RDS data are used to make Network Tracking Reception work correctly PI Programme Identification and AF Alternative Frequency Without receiving these data correctly from the RDS station you are listening to Network Tracking Reception will not operate RDS OPERATIONS To use Network Tracking Recept
75. nd Current track number Notes The display shows up to 8 characters at a time and scrolls if there are more than 8 characters See also To select the scroll mode SCROLL on page 35 Some characters or symbols will not be shown and will be blanked on the display Ex ABC d gt ABCA D When you press D DISP while playing a conventional CD NO NAME appears for the disc title performer and the track title You can prohibit disc ejection and can lock a disc in the loading slot x o E o z H While pressing CD CD CH press and hold amp i ATT for more than 2 seconds Ze NO EJECT flashes on the display for about 5 seconds and the disc is locked and cannot be ejected To cancel the prohibition and unlock the disc While pressing CD CD CH press and hold O I ATT again for more than 2 seconds EJECT OK flashes on the display for about 5 seconds and the disc is unlocked 23 x o l o z H 24 C MP3 INTRODUCTION What is MP3 MP3 is an abbreviation of Motion Picture Experts Group or MPEG Audio Layer 3 MP3 is simply a file format with a data compression ratio of 1 10 128 Kbps That means by using MP3 format one CD R or CD RW can contain 10 times as much data volume as a regular CD can Bit rate is the average number of bits that one second of audio data will consume The unit used is Kbps 1024 bits second To get a better
76. ndet werden Werden l ngere Schrauben verwendet k nnen sie das Ger t besch digen Lors de l installation de l appareil sur le support de montage s assurer d utiliser des vis d une longueur de 6 mm Si des vis plus longues sont utilis es elles peuvent endommager l appareil Wanneer u het apparaat aan de bevestigingsklem vastmaakt moet u de 6 mm lange schroeven gebruiken Als u langere schroeven gebruikt kan het apparaat worden beschadigd Removing the unit Before removing the unit release the rear section 1 Remove the control panel g Remove the trim plate Insert the 2 handles into the slots as shown Then while gently pulling the handles away from each other slide out the unit Be sure to keep the handles after installing it Ausbau des Ger ts Vor dem Ausbau des Ger ts den hinteren Teil freigeben Den Schalttafel abnehmen 2 Den Frontrahmen herausnehmen A De 2 Griffe in die Schlitze wie gezeigt stecken Dann die Griffe behutsam auseinander ziehen und das Ger t herausziehen Die Griffe nach dem Einbau auf jeden Fall aufbewahren Retrait de l appareil Avant de retirer l appareil lib rer la section arri re 1 Retirer le panneau de commande 2 Retirer la plaque d assemblage 3 Introduire les 2 poign es dans les fentes comme montr Puis tout en tirant doucement les poign es cart es faire glisser l appareil pour le sortir S assurer de conserver les poign es apres l installatio
77. ndicator flashes PTY Standby Reception is not yet activated since the station being received does not provide the signals used for PTY Standby Reception To activate PTY Standby Reception you need to tune in to another station providing these signals Press gt A or L a y to search for such a station When a station providing these signals is tuned in the PTY indicator stops flashing and remains lit Now PTY Standby Reception is activated m When the current source is other than FM the PTY indicator lights up If a station starts broadcasting the selected PTY programme this unit automatically changes the source and tunes in to the station To deactivate the PTY Standby Reception select OFF in step 3 on the left column The PTY indicator disappears x o E o z H 15 x o l o z H 16 eco Searching your favorite programme You can search any one of the PTY codes In addition you can store your 6 favorite programme types in the number buttons When shipped from the factory the following 6 programme types have been stored in the number buttons 1 to 6 To store your favorite programme types see below To search your favorite programme type see page 17 1 2 3 POPM ROCK M EASY M 4 5 6 CLASSICS AFFAIRS VARIED To store your favorite programme types Press and hold T TP PTY for more than 2 seconds while listening to an FM station The
78. ne in to stations of higher frequencies To tune in to stations of lower frequencies CONTINUED ON THE NEXT PAGE 11 x o E o Z H 12 W AMI P 3 Press and hold the number button in this example 1 for more than 2 seconds EQ ROCK CLASSIC POPS HIP HOP JAZZ USER E Selected band preset number and MEMO memory appear alternately for a while 4 Repeat the above procedure to store other stations into other preset numbers Notes A previously preset station is erased when a new station is stored in the same preset number e Preset stations are erased when the power supply to the memory circuit is interrupted for example during battery replacement If this occurs preset the stations again Tuning in to a preset station You can easily tune in to a preset station Remember that you must store stations first If you have not stored them yet see Storing stations in memory on pages 11 and 12 T Select the band FM1 3 AM en FM2 FM3 AM Each time you press the button the band changes as follows F1 F2 F3 2 Select the number 1 6 for the preset station you want 7 tQ 8 MO 9 C19 ED Ti RPT 12 RND 9 ED EGER SS What you can do with RDS RDS Radio Data System allows FM stations to send an additional signal along with their regular programme signals For example the stations send their station
79. ng the general settings PSM on page 32 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press gt gt A orma V to select AUTO ADJ adjustment 3 Turn the control dial counterclockwise to select OFF Now automatic clock adjustment is canceled 4 Press SEL select to finish the setting To reactivate clock adjustment repeat the same procedure and select ON in step 3 by turning the control dial clockwise Note You must stay tuned to the same station for more than 2 minutes after setting AUTO ADJ to ON Otherwise the clock time will not be adjusted This is because the unit takes up to 2 minutes to capture the CT data in the RDS signal eo PTY codes NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M WEATHER FINANCE News Topical programmes expanding on current news or affairs Programmes which impart advice on a wide variety of topics Sport events Educational programmes Radio plays Programmes on national or regional culture Programmes on natural science and technology Other programmes like comedies or ceremonies Pop music Rock music Easy listening music Light music Classical music Other music Weather information Reports on commerce trading the Stock Market etc CHILDREN SOCIAL RELIGION PHONE IN TRAVEL
80. ngsadapter KS U57 anschlie en siehe Schaltplan Bi 2 component such as a portable MD player by connecting the Line Input Adapter KS U57 not supplied See diagram Bl JVC CD wisselaar DAB tuner of een ander extern apparaat KD MK avec cet appareil Vous pouvez aussi utiliser un appareil ext rieur tel qu un lecteur de MD en connectant l adaptateur d entr e de ligne KS U57 non fourni Voir le diagramme E apparaat zoals een draagbare MD speler aan te sluiten met behulp van de Line Input Adapter KS U57 niet meegeleverd Zie schema Di siehe Schaltplan Pour la t l commande de volant voir le diagramme 8 Naar stuurwiel afstandsbediening zie schema SUBWOOFER Ex Fuse position 2 2 Sicherungsposition Position de fusible 2 Zekering stand 2 Bil es es sl mo sl se sl see diagram I Fuse position 1 1 Sicherungsposition siehe Schaltplan on oo es o K sl sal el nl Position de fusible 1 Zekering stand 1 J voir le diagramme 2 eaf sel esf ae i E EEEE EEE E zie schema ad Ih 15 A fuse 15 A Sicherung Not included with this unit deg TT Fusible 15 A Zekering 15 A 1 Wird nicht mit Ger t mitgeliefert s Ignition switch t t E E e E E ge Non fourni avec cet
81. no limit on the number of the hierarchy levels nested folders However up to 8 hierarchy levels is recommended for stable operations MP3 playback search order The numbers in circles below the MP3 files L indicate the playback order and search order of the MP3 files Normally this unit plays back MP3 files in the recorded order The numbers inside the folders indicate the playback order and search order of the folders on an MP3 disc Normally this unit plays back MP3 files in the folders in the recorded order 25 x o l o z H MP3 OPERATIONS BEE 2 O Ce CS EZ AF EES EE Refer also to CD OPERATIONS on pages 20 to 23 Playing an MP3 disc I Open the control panel Note on One Touch Operation When a disc is already in the loading slot pressing CD CD CH turns on the unit and starts playback automatically 2 Insert an MP3 disc into the loading slot The unit turns on draws the disc and starts playback automatically All files will be played repeatedly until you stop playback 26 The display changes to show the following Current source CD in indicator indication ba pe Res EQ rock CLASSIC POPS HIPHOP JAZZ USER Total folder Total file number Y number EQ ROCK CLASSIC POPS HIP HOP JAZZ USER MP3 indicator Ex When the disc contains 19 folders and 144 MP3 files
82. number from 01 06 Press 1 7 6 12 briefly To select a folder number from 07 12 Press and hold 1 7 6 12 for more than one second Notes If MP3 flashes on the display after you have selected a folder it means that the folder does not contain any MP3 files You cannot directly select a folder with a number greater than 12 To select a particular file in a folder press gt l A oraa V after selecting the folder To skip to the next or previous folder CRY ev EF Press A up while playing an MP3 disc to skip to the next folder Each time you press the button consecutively the next folder is located and the first file in the folder starts playing if recorded 7 Press w down while playing an MP3 disc to skip back to the previous folder Each time you press the button consecutively the previous folder is located and the first file in the folder starts playing if recorded Note If the folder does not contain any MP3 files it is skipped 6 To play back files repeatedly Track Repeat Folder Repeat Play You can play back the current file or all the files in the current folder repeatedly 1 Press M MODE to enter the functions mode while playing an MP3 disc MODE flashes on the upper part of the display Selecting MP3 playback modes To play back files at random Folder Random Disc Random Play You can play back all files of the
83. obiele telefoon worden geleverd Andere naar de speakers Autres aux enceintes 2 Connectez le cordon d antenne 3 Finalement connectez le faisceau de fils l appareil Remarque Si votre v hicule ne poss de pas de borne accessoire d placez le fusible de la position de fusible 1 position originale la position de fusible 2 et connectez le fil rouge A7 la borne positive de la batterie e Le fil jaune A4 n est pas utilis dans ce cas 2 Sluit de antenne aan 3 Verbind de draadbundel daarna met het apparaat Opmerking Als uw voertuig niet beschikt over een aansluitklem moet u de zekering verplaatsen van stand 1 beginstand naar stand 2 en moet u de rode draad A7 met de pluspool van de accu verbinden n dit geval wordt de gele draad A4 niet gebruikt 2 Das Antennenkabel anschlieBen 3 Die Kabelb ume am Ger t anschlieBen Hinweis Verf gt Ihr Fahrzeug nicht ber eine Zubeh ranschluBklemme die Sicherung von der 1 Sicherungsposition Erstposition in die 2 Sicherungsposition versetzen die rote Leitung A7 an der BatterieanschluBklemme anschlieBen Die gelbe Leitung A4 wird in diesem Fall nicht verwendet JVC CD changer DAB tuner or another external component CD Wechsler von JVC DAB Tuner oder eine andere externe Komponente 3 Finally connect the wiring harness to the unit Note If your vehicle does not have any accessory terminal move the fuse from the fuse position
84. oon change to the clock time Notes When you press CD CD CH the power automatically comes on You do not have to press QO V ATT to turn on the power f you change the source CD changer play also stops Next time you select the CD changer as the source CD changer play starts from where playback has been stopped previously When you start playing back a CD Text or MP3 disc disc information will automatically appear on the display See pages 23 and 27 To go to a particular disc directly Press the number button corresponding to the m disc number to start its playback while the CD d changer is playing S re smo o o mm AND ul SES EE EHE SS To select a disc number from 1 6 Press 1 7 6 12 briefly To select a disc number from 7 12 Press and hold 1 7 6 12 for more than one second To fast forward or reverse the track file r Press and hold gt A during play to fast forward the track file Press and hold wv during play to reverse the track file To go to the next or previous tracks files r Press gt A briefly during play to skip ahead to the beginning of the JN Next track file Each time you press the button consecutively the beginning of the next tracks files is located and played back Press L a WV briefly during play to skip back to the beginning of the current track file Each time you press the button consecutively t
85. ore detaching the control panel be sure to turn off the power I Unlock the control panel Attaching the control panel I Insert the right side of the control panel into the groove on the panel holder 2 Press the left side of the control panel to fix it to the panel holder 3 Put the detached control panel into the provided case Note on cleaning the connectors If you frequently detach the control panel the connectors will deteriorate To minimize this possibility periodically wipe the connectors with a cotton swab or cloth moistened with alcohol being careful not to damage the connectors Connectors x o o z H 37 ENGLISH 38 We recommend that you use the JVC MP3 compatible CD changer with your unit By using this CD changer you can play back your original CD Rs Recordable and CD RWs Rewritable recorded either in audio CD format or in MP3 format You can also connect other CH X series CD changers except CH X99 and CH X100 However they are not compatible with MP3 discs so you cannot play back MP3 discs You cannot use the KD MK series CD changers with this unit Before operating your CD changer Refer also to the Instructions supplied with your CD changer If no discs are in the magazine of the CD changer or the discs are inserted upside down NO DISC will appear on the display If this happens
86. ou press and hold the button the DAB tuner and the FM AM tuner are alternately selected DAB lt gt FM AM 2 Select the DAB band DAB1 DAB2 or DAB3 you want DAB Each time you press the button the DAB band changes as follows gt DAB 1 DAB2 DAB3 D1 D2 D3 CAE 3 Select the number 1 6 for the preset DAB service primary you want aS CGS Note If the selected primary service has some secondary services pressing the same number button repeatedly will tune in to the secondary services What you can do more with DAB Tracing the same program automatically Alternative Reception You can keep listening to the same program While receiving a DAB service When driving in an area where a service cannot be received this unit automatically tunes in to another ensemble or FM RDS station broadcasting the same program While receiving an FM RDS station When driving in an area where a DAB service is broadcasting the same program as the FM RDS station is broadcasting this unit automatically tunes in to the DAB service CONTINUED ON THE NEXT PAGE ENGLISH 47 x o l o z H 48 To use Alternative Reception When shipped from the factory Alternative Reception is activated See also Changing the general settings PSM on page 32 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display
87. ou select MAG RND Note MP3 indicator also lights up if the current playing disc is an MP3 disc Mode Active Plays at random indicator FLDR RND and RND All files of the indicators current folder then light up files of the next folder and so on DISC RND 9 and RND All tracks files of indicators the current or light up specified disc MAG RND RND indicator All tracks files of lights up the inserted discs FLDR RND is only applicable for MP3 discs 41 x o l o z H To play back tracks files repeatedly Track Repeat Folder Repeat Disc Repeat Play Ke 1 Press M MODE to enter the functions mode during play MODE flashes on the upper part of the display x o E o Z H mu 2 Press RPT repeat while MODE is still flashing on the display Each time you press the button the repeat play mode changes as follows For MP3 discs gt TRKRPT FLDR RPT Canceled lt DISC RPT lt For CDs i TRK RPT DISC RPT Canceled EQ nock CLASSIC POPS HIPHOP JAZZ USER T disc and RPT indicators Ex When you select DISC RPT Note MP3 indicator also lights up if the current playing disc is an MP3 disc 42 Active Mode indicator Plays repeatedly TRK RPT RPT indicator The current or lights up specified track file FLDR RPT 7 and RPT All f
88. r only for MP3 discs La Press A up while playing an d e MP3 disc to go to the next folder Each time you press the button consecutively the next folder is located and the first file in the folder starts playback Press w down while playing an MP3 disc to go to the previous folder Each time you press the button consecutively the previous folder is located and the first file in the folder starts playback To show the disc information for CD Text and MP3 discs This is possible only when connecting a JVC CD changer equipped with CD Text and or MP3 disc information reading capability Select text display mode while playing a CD Text or an MP3 disc DISP ENS For details see page 23 about CD Text disc information and page 27 about MP3 disc information Selecting the playback modes To play back tracks files at random Folder Random Disc Random Magazine Random Play Ki 1 Press M MODE to enter the functions mode during play MODE flashes on the upper part of the display So 2 Press RND random while EENS MODE is still flashing on the display Each time you press the button the random play mode changes as follows For MP3 discs gt FLDR RND DISC RND Canceled lt MAG RND lt For CDs r DISC RND gt MAG RND 4 Canceled EQ nock CLASSIC POPS HIP HOP JAZZ USER RND indicator Ex When y
89. re not sufficient for good reception this unit using the AF data To select any one of the twenty nine tunes in to another frequency broadcasting the PTY codes same programme as the original preset station is broadcasting Programme search The unit takes some time to tune in to another station using programme search To activate programme search follow the procedure below See also Changing the general settings PSM on page 32 Preset number appears only if you select a PTY code using the number buttons 1 Press and hold SEL select for more than 2 seconds so that one of the PSM items appears on the display 2 Press PPI A Or L a v to select P Programme SEARCH 3 Turn the control dial clockwise to select ON Ex When ROCK M is selected Now programme search is activated 4 Press SEL select to finish the setting 3 Press gt gt A or lt lt v to start PTY search for your favorite programme To cancel programme search repeat the same procedure and select OFF in step 3 by turning the control dial counterclockwise 17 x o l o z H 18 eo Changing the display mode while listening to an FM station You can change the initial indication on the display to station name PS NAME or station frequency FREQ while listening to an FM RDS station See also Changing the general settings PSM on page 32 1 Press and hold SEL select for more
90. riving on extremely rough roads This does not damage the unit and the disc but will be annoying We recommend that you stop disc play while driving on such rough roads x o E o Z m 51 x o E o Z H 52 MAINTENANCE Handling discs This unit has been designed to reproduce CDs CD Rs Recordable CD RWs Rewritable and CD Texts This unit is also compatible with MP3 discs How to handle discs When removing a disc from its case press down the center holder of the case and lift the disc out holding it by the edges Always hold the disc by the edges Do not touch its recording surface Center holder When storing a disc into its case gently insert the disc around the center holder with the printed surface facing up Make sure to store discs into the cases after use To keep discs clean A dirty disc may not play correctly If a disc does become dirty wipe it with a soft cloth in a straight line from center to edge RS To play new discs New discs may have some rough spots around the inner and outer edges If such a disc is used this unit may reject the disc To remove these rough spots rub the edges with a pencil or ball point pen etc Moisture condensation Moisture may condense on the lens inside the CD player in the following cases After starting the heater in the car If it becomes very humid inside the car Should this occur
91. rminology During recording the files and folders can be arranged in a way similar to arranging files and folders of computer data Root is similar to the root of a tree Every file and folder can be linked to and be accessed from the root Playback order file search order and folder search order of the MP3 files recorded on a disc are determined by the writing or encoding application therefore playback order may be different from the one you have intended while recording the folders and the files The illustration on the next page shows an example of how MP3 files are recorded on a CD R or CD RW how they are played back and how they are searched for on this unit Notes The unit can read a CD ROM containing MP3 files However if non MP3 files are recorded together with MP3 files this unit will take a longer time to scan the disc It may also cause the unit to malfunction The unit cannot read or play an MP3 file without the extension code mp3 This player is not compatible with the data encoded with Layer 1 and Layer 2 formats The unit is not compatible with Playlist A playlist is a simple text file used on a PC which enables users to make their own playback order without physically rearranging the files O MP3 folder file configuration ENGLISH Hierarchy Root Folders 2 MP3 files Note There is
92. s Playing a CD Text Prohibiting disc ejection MP3 OPERATIONS Playing an MP3 disc Locating a file or a particular portion on an MP3 disc aon enne 27 Selecting MP3 playback modes 29 SOUND ADJUSTMENTS 30 Selecting preset sound modes C EQ custom equalizer 30 Adjusting the sound sseeeieeeeeeerrerenn 31 OTHER MAIN FUNCTIONS 32 Changing the general settings PSM 32 Assigning names to the sources 36 Detaching the control panel 37 CD CHANGER OPERATIONS Playing discs Selecting the playback modes EXTERNAL COMPONENT OPERATIONS 43 Playing an external component 43 DAB TUNER OPERATIONS 44 Tuning in to an ensemble and one of the SerViCeS csescesscsesceseseesseessoeeesenseseessaeees Storing DAB services in memory Tuning in to a preset DAB service What you can do more with DAB MP3 INTRODUCTION TROUBLESHOOTING What is MP How are MP3 files recorded and MAINTENANCE RRSERARESESREARERRSRARESRESRHARRREREN 52 played back eee etes 24 Handling decs esses 52 SPECIFICATIONS 53 Note For security reasons a numbered ID card is provided with this unit an
93. s disc 4 Functions the same as the control dial on the main unit Note These buttons do not function for the preferred setting mode adjustment 5 Selects the sound mode C EQ custom equalizer Each time you press the button the sound mode C EQ changes 6 Selects the source Each time you press the button the source changes Searches for stations while listening to the radio Selects services while listening to the DAB tuner if pressed briefly Searches for ensembles while listening to the DAB tuner if pressed for more than one second Fast forwards or reverses the track file if pressed and held while listening to a disc Skips to the beginning of the next track file or goes back to the beginning of the current or previous tracks files if pressed briefly while listening to a disc x o l o z H i Preparing the remote controller Before using the remote controller Aim the remote controller directly at the remote sensor on the main unit Make sure there is no obstacle in between x o l o z H SIE E Remote sensor Do not expose the remote sensor to strong light direct sunlight or artificial lighting Installing the battery When the controllable range or effectiveness of the remote controller decreases replace the battery 1 Remove the battery holder 1 Push out the battery holder in the direction
94. sert a CD into the loading slot The unit turns on draws the CD and starts playback automatically All tracks will be played repeatedly until you stop playback 20 The display changes to show the following Current source CD in indicator indication EQ ROCK CLASSIC POPS HIP HOP JAZZ USER Total playing time Total track number of the inserted disc ofthe inserted disc rm mi mm EQ nock CLASSIC POPS HIP HOP JAZZ USER EE BEES Elapsed playing time Current track Y 1 1 e bei A H EQ ROCK CLASSIC POPS HIP HOP JAZZ USER When CLOCK is set to ON see page 34 the current indication will soon change to the clock time Notes When a CD is inserted upside down the CD automatically ejects if the control panel is open If the control panel is closed the source changes to the previously selected source PLEASE and EJECT appear alternately on the display When you open the control panel by pressing amp the CD automatically ejects If there is no CD in the loading slot you cannot select CD as the source NO DISC appears on the display fa disc is a CD Text disc title performer and then track title will automatically appear To stop play and eject the CD Press A CD play stops and the control panel flips down The CD automatically ejects from the loading To go to a particular track directly Press the number button corr
95. t elles mises ensemble la masse De zekering slaat door Zijn de rode en de zwarte draden op de juiste manier aangesloten De stroom kan niet worden ingeschakeld s de gele draad aangesloten Er komt geen geluid uit de speakers s de uitgaande speakerdraad kortgesloten Het geluid wordt vervormd Is de uitgaande speakerdraad geaard Zijn de polen van de linker en de rechterspeakers gemeenschappelijk geaard Het apparaat raakt verhit Is de uitgaande speakerdraad geaard Zijn de polen van de linker en de rechterspeakers gemeenschappelijk geaard When using the optional stay Beim Verwenden der Anker Option Lors de l utilisation du hauban en option Wanneer u de steun gebruikt facultatief Fire wall Goo Stay option Washer of nker Option Unterlegscheibe aan lt Hanten en option Rondelle mU Steun facultatief Sluitring Gr gi Lock nut Dashboard Sicherungsmutter Armaturenbrett oN Ecrou d arr t Tableau de bord Contra moer Dashboard Screw option Schraube Option Vis en option Schroef facultatief Mounting bolt Befestigungsschraube ci Sleeve When installing the unit without using the sleeve Beim Einbau des Ger ts ohne Halterung Lors de l installation de l appareil scans utiliser de manchon Wanneer u het apparaat zonder huis installeert In a Toyota for example first remove the car radio and install the unit in its place Zum B
96. t apparaat in het huis totdat het vergrendeld is 8 Bevestig een sierplaat Opmerking Zorg dat het ingedeukte gedeelte onder is Het bedieningspaneel kan anders namelijk niet geheel worden geopend 9 Bevestig het bedieningspaneel Control panel Schalttafel Panneau de commande Bedieningspaneel ENS Handle Griff Poign e Hendel Slot j Schlitz Sicherung Fente Fusible Sleuf Zekering Lock Plate MA 2 Arretierpl ttchen Plaque de verrouillage Vergrendelingsplaat Trim plate Frontrahmen Plaque d assemblage Sierplaat 2 Rubber cushion Gummipuffer Amortisseur en caoutchouc Rubberdop Sleeve Halterung Manchon Huis Sleeve Control panel J Trim plate Halterung Schalttafel Frontrahmen Manchon Panneau de commande Plaque d assemblage Huis Bedieningspaneel Sierplaat Dashboard Armaturenbrett Tableau de bord Dashboard Mounting bolt Befestigungsschraube Boulon de montage Bevestigingsbout 6 See ELECTRICAL CONNECTIONS Siehe ELEKTRISCHE ANSCHL SSE R f rez vous RACCORDEMENTS ELECTRIQUES Zie ELEKTRISCHE VERBINDINGEN M St TROUBLESHOOTING FEHLERSUCHE EN CAS DE DIFFICULTES PROBLEMEN OPLOSSEN The fuse blows Are the red and black leads connected correctly Power cannot be turned on Is the yellow lead connected No sound from the speakers
97. terminal correctly BEFORE connecting the speaker leads of the power cord to the speakers check the speaker wiring in your car If the speaker wiring in your car is as illustrated in Fig 1 and Fig 2 below DO NOT connect the unit using that original speaker wiring If you do the unit will be seriously damaged Redo the speaker wiring so that you can connect the unit to the speakers as illustrated in Fig 3 If the speaker wiring in your car is as illustrated in Fig 3 you can connect the unit using the original speaker wiring in your car f you are not sure of the speaker wiring of your car consult your car dealer VORSICHTSMASSREGELN beim AnschlieBen der Stromversorgung und Lautsprecher Die Lautsprecherleitungen des Netzkabels NICHT an der Autobatterie anschlieBen da sonst das Ger t schwer besch digt wird Die schwarze Leitung Erdung die gelbe Leitung zur Autobatterie konstant 12 V und die rote Leitung zur Zubeh ranschluBklemme richtig anschlie en VOR dem AnschlieBen der Lautsprecherleitungen des Spannunsgversorgungskabels an die Lautsprecher die Lautsprecherverdrahtung in Ihrem Auto berpr fen Ist die Lautsprecherverdrahtung wie unten in Fig 1 und Fig 2 abgebildet das Ger t NICHT mit der Originalverdrahtung der Lautsprecher anschlieBen da sonst das Ger t schwer besch digt wird Die Lautsprecherverdrahtung erneuern so da Sie das Ger t an den Lautspre
98. the CD player may malfunction In this case eject the disc and leave the unit turned on for a few hours until the moisture evaporates When playing a CD R or CD RW Before playing back CD Rs or CD RWs read their instructions or cautions carefully Use only finalized CD Rs or CD RWs Some CD Rs or CD RWs may not play back on this unit because of their disc characteristics and for the following reasons Discs are dirty or scratched Moisture condensation on the lens inside the unit The pickup lens inside the unit is dirty CD RWs may require a longer readout time since the reflectance of CD RWs is lower than that of regular CDs CD Rs or CD RWs are susceptible to high temperatures or high humidity so do not leave them inside your car Do not use following CD Rs or CD RWs Discs with stickers labels or protective seal stuck to the surface Discs on which labels can be directly printed by an ink jet printer Using these discs under high temperatures or high humidity may cause malfunctions or damage to discs For example Stickers or labels may shrink and warp a disc Stickers or labels may peel off so discs cannot be ejected Print on discs may get sticky Read instructions or cautions about labels and printable discs carefully CAUTIONS Do not insert 8 cm discs single CDs into the loading slot Such discs cannot be ejected Do not insert any disc of unusual
99. through this unit anderen Ger ts an so da es ber dieses Ger t For amplifier only gesteuert werden kann Connect this unit s line out terminals to the Nur f r den Verst rker amplifier s line in terminals Die AnschluBklemmen am Ausgang dieses Ger t Disconnect the speakers from this unit an den AnschluBklemmen des Eingangs des connect them to the amplifier Leave the Verstarkers anschlieBen speaker leads of this unit unused Cover the Die Lautsprecher von diesem Ger t abtrennen terminals of these unused leads with und am Verst rker anschlie en Die insulating tape as illustrated above Lautsprecherleitungen dieses Gerats unbenutzt lassen Die AnschluBklemmen dieser nicht verwendeten Leitungen mit Isolierklebeband umwickeln siehe Abbidung oben Vous pouvez connecter un amplificateur ou autre appareil pour am liorer votre syst me autoradio Connectez le fil de commande distance bleu avec bande blanche au fil de commande distance de l autre appareil de facon qu il puisse tre command via cet appareil Pour l amplificateur seulement Haccorder les bornes de sortie ligne de cet appareil aux bornes d entr e ligne de l amplificateur D connectez les enceintes de cet appareil et connectez les l amplificateur Laissez les fils d enceintes de cet appareil inutilis s Recouvrir les extr mit s de ces fils inutilis s avec de la bande isolante comme montr ci dessus Het is mogelij
100. tive frequency Regionalization reception AF gt AF REG t ors d AF PTY STBY PTY standby OFF 29 programme types see page 19 OFF TA VOL Traffic announcement volume VOL 00 VOL 50 VOL 20 P SEARCH Programme search OFF ON OFF DAB AF Alternative frequency search AF OFF AF ON AF ON DAB VOL DAB volume adjustment VOL 12 VOL 12 VOLOO LEVEL Level display AUDIO 1 t AUDIO 2 or d AUDIO 2 DIMMER Dimmer mode AUTO t e OFF ON d AUTO TEL Telephone muting MUTING 1 gt MUTING 2 t or d OFF BEEP Key touch tone OFF ON ON SCROLL Scroll mode ONCE f AUTO or d ONCE EXT IN External component CHANGER LINE IN CHANGER TAG DISP Tag display TAG OFF Displayed only when DAB AF is set to AF OFF TAG ON TAG ON 2 Displayed only when DAB tuner is connected 3 Displayed only when one of the following sources is selected FM AM and CD 33 x o o Z H 34 To set the clock display CLOCK You can set the clock to be shown on the display when the unit is turned on When shipped from the factory the clock is set to be shown on the display ON OFF Clock display is turned on Clock display is turned off When OFF is selected the other information see table below app
101. ture consulter le concessionnaire de votre voiture VOORZORGSMAATREGELEN bij het verbinden van de stroomkabeldraad met de speakers Verbind de speakerdraden van de stroomkabel NIET met de accu van de auto als u dit wel doet zal het apparaat ernstige schade oplopen Sluit de zwarte draad aarde de gele draad naar de accu van de auto constant 12 V en de rode draad naar de aansluitklem van de accessoire op de juiste wijze aan VOORDAT u de speakerdraden van de stroomkabel met de speakers verbindt moet u de bedrading van de speakers in uw auto controleren Als de bedrading van de speakers eruitziet zoals hieronder staat afgebeeld in Fig 1 en Fig 2 mag het apparaat NIET worden aangesloten met behulp van deze oorspronkelijke speakerbedrading Als u dat wel doet zal het apparaat ernstige schade oplopen Pas de bedrading van de speakers aan zodat u het apparaat met de speakers kunt verbinden zoals staat afgebeeld in Fig 3 Als de bedrading van de speakers eruitziet zoals staat afgebeeld in Fig 3 kunt u het apparaat aansluiten met behulp van de oorspronkelijke speakerbedrading in uw auto Als u twijfels hebt over de speakerbedrading in uw auto moet u contact opnemen met uw autodealer Connecting the leads AnschlieBen der Leitungen Raccordement des fils Aansluiting van de gekleurde draden Twist the core wires when connecting Die Kerndr hte beim AnschlieBen verdrehen Torsader les
102. ube mit einem Gummipuffer abdecken 6 Nehmen Sie die erforderlichen elektrischen Anschl sse vor 7 Das Ger t in die Halterung schieben bis es einrastet 8 Befestigen Sie den Frontrahmen Hinweis Vergewissern Sie sich dass sich die Aussparung an der Unterseite befindet Ist dies nicht der Fall l sst sich die Bedienungsblende nicht vollst ndig ffnen 9 Die Schalttafel anbringen 1 Avant le montage Appuyer sur L amp J d blocage du panneau de commande pour venteullement d tacher le panneau de Commande Lorsque ce panneau de commande sort d usine il est rang dans un tui de transport Retirer la plaque d assemblage Lib rer les verrous du manchon et retirer le manchon D Poser l appareil la verticale Remarque Lorsque vous mettez l appareil la verticale faire attention de ne pas endommager le fusible situ sur l arri re Ins rer les 2 poign es entre l appareil et le manchon comme indiqu pour d sengag les verrous de manchon Retirer le manchon Remarque S assurer de garder les poign es pour une utilisation ult rieur apr s l installation de l appareil Installer le manchon dans le tableau de bord Apr s installation correcte du manchon dans le tableau de bord plier les bonnes pattes pour maintenir fermement le manchon en place comme montr Monter le boulon de montage sur l arri re du corps de l appareil puis passer l amortisseur en caoutchouc sur l extr mit du

JVC KD-LH70R User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents