JVC KA-MR100G User's Manual
Contents
1. Note e Do not use the battery that cannot be connected with this product For details please refer to the instruction manual of the camcorder Setup Connecting IEEE1394 There are 2 ways to connect the IEEE1394 Connecting via IEEE1394 Cable e Connect the IEEE1394 cable to the KA UM100G adapter and the IEEE1394 terminal of the camcorder Set the INT EXT switch to EXT INT EXT switch KA UM100G adapter gh IEEE1394 cable 7 F Memo When the switch is set to INT signal input and output is disabled e For information on where to purchase an IEEE1394 cable please consult our authorized dealers Connection via Internal Wiring Changes need to be made to the internal wire connections of the camcorder Memo e When making a connection with the switch set to INT it is necessary to alter the internal wire connections of the camcorder For details please consult our authorized dealers When making a connection with internal wiring the IEEE1394 terminal of the adapter is disabled INT EXT Switch Description e For recording data to or playing data from the INT SxS memory card When the switch is set to INT the IEEE1394 terminal on the camcorder is disabled e For connecting the IEEE1394 terminal on the camcorder to a computer or other devices EXT When the switch is set to EXT the internal connection between the memory recorder and the c2. Memory Recorder KA MR100G INSTRUCTIONS INFO CLR Thank you for purchasing this JVC product Before beginning to operate this unit please read the instructions carefully to ensure the best possible performance For Customer Use Enter below the Serial No which is located on the body Remain this information for future reference Model No KA MR100G Serial No LST0838 001A Getting Started FOR USA These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances IMPORTANT SAFEGUARDS PON gt a Read all of these instructions Save these instructions for later use All warnings on the product and in the operating instructions should be adhered to Unplug this appliance system from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Do not use attachments not recommended by the appliance manufacturer as they may cause hazards Do not use this appliance near water for example near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool etc Do not place this appliance on an unstable cart stand or table The appliance may fall PORTABLE CART WARNING causing serious injury to a child or adult and serious damage to the appliance eymbol provided by RETAG Use only with a cart or stand recommended by the manufacturer or sold with the appliance
3. AVERTISSEMENT POUR EVITER LES RISQUES D INCENDIE OU D ELECTROCUTION NE PAS EXPOSER L APPAREIL A L HUMIDITE OU ALA PLUIE ATTENTION Ce magn toscope ne doit tre utilis que sur du courant direct en 12V Afin d eviter tout resque d incendie ou d electrocution ne pas utillser d autres sources d alimentation lectrique Getting Started Safety Precautions continued FOR EUROPE This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives This equipment is designed for professional video appliances and can be used in the following environments Controlled EMC environment for example purpose built broad casting or recording studio and rural outdoors environments In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use cables not exceeding the following lengths Cable Maximum Cable Length IEEE1394 CABLE Shield Cable 0 2m Caution Where there are strong electromagnetic waves or magnetism for example near a radio or TV transmitter transformer motor etc the picture and the sound may be disturbed In such case please keep the apparatus away from the sources of the disturbance Dear Customer This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety European repre
4. Wall or shelf mounting should follow the manufacturer s instructions and should use a mounting kit approved by the manufacturer An appliance and cart combination should be e moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart Ao combination to overturn 53125A Slots and openings in the cabinet and the back or bottom are provided for ventilation and to insure reliable operation of the appliance and to protect it from overheating these openings must not be blocked or covered The openings should never be blocked by placing the appliance on a bed sofa rug or other similar surface This appliance should never be placed near or over a radiator or heat register This appliance should not be placed in a built in installation such as a bookcase unless proper ventilation is provided This appliance should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult your dealer or local power company For appliance designed to operate from battery power refer to the operating instructions For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it form the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Do not allow anything to rest on the power
5. clip without the check mark v is Set the camcorder and memory recorder according to the se Page 10 selected video format displayed when a clip is selected The memory recorder is in the recording or Press the STOP button to stop playback ts Page 10 standby mode The clip may be damaged Execute RESTORE using this memory recorder te Page 14 No response when a_ The OPERATION menu is set to LOCK Change the OPERATION menu setting to UNLOCK ce Page 14 button is pressed A multiple number of buttons are pressed Insert a short pause between each button operation at the same time or the same button is hit repeatedly Access lamp does not The SxS memory card is not completely Make sure that the SxS memory card is fully inserted into r Page 8 turn on inserted into the card slot the slot The SxS memory card is inserted with the Identify the face of the SxS memory card with the label w Page 8 label facing the opposite direction and make sure that the card is correctly oriented before inserting SxS memory card A SxS memory card that is formatted by Execute FORMAT using this memory recorder ce Page 13 cannot be used another device is used A media that is not supported is inserted Replace it with a recommended SxS memory card te Page 14 The clip is faulty Execute RESTORE or FORMAT using this memory ce Page 14 recorder If doing so does not eliminate the error replace it with a rec
6. cord Do not locate this appliance where the cord will be abused by persons walking on it Follow all warnings and instructions marked on the appliance Do not overload wall outlets and extension cords as this can result in fire or electric shock Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the appliance Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power cord or plug is damaged or frayed b If liquid has been spilled into the appliance c If the appliance has been exposed to rain or water d If the appliance does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation e If the appliance has been dropped or the cabinet has been damaged f When the appliance exhibits a distinct change in performance this indicates a need for service When replacement
7. parts are required be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Upon completion of any service or repairs to this appliance ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition Safety Precautions FOR USA AND CANADA RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTSINSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance POUR CANADA RISQUE D ELECTROCUTION NE PAS OUVRIR ATTENTION POUR EVITER TOUT RISQUE D ELECTROCUTION NE PAS OUVRIR LE BOITER AUCUNE PIECE INTERIEURE N EST A REGLER PAR LUTILISATEUR SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME Le symbole de l clair al int
8. rieur d un triangle quilat ral est destin a alerter l utilisateur sur la pr sence d une tension dangereuse non isol e dans le boitier du produit Cette tension est suffisante pour provoquer I lectrocution de personnes Le point d exclamation al int rieur d un triangle quilat ral est destin a alerter l utilisateur sur la pr sence d op rations d entretien importantes au sujet desquelles des renseignements se trouvent dans le manuel d instructions Ces symboles ne sont utilis squ aux Etats Unis INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense CAUTION CHANGES OR MODIFICATIONS NOT APPROVED BY JVC COULD VOID USER S AUTHORITY TO OPERATE THE EQUIPMENT NOTE The rating plate serial number plate is on this unit WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC S
9. the control buttons and menus of the memory recorder OPERATION UNLOCK LOCK You can disable the button control of the memory recorder to avoid misoperations during shooting UNLOCK Enables all buttons LOCK Button control is disabled with the exception of the following e Record Standby REC trigger button of the camcorder e Menu screen display MENU button e Power On POWER button ALL RESET YES NO For resetting the menu settings of the memory recorder to the default values YES Restore default settings Press the INFO CLR button NO Donot restore default settings Press the STOP button 13 Others Warning Messages When warning messages appear on the LCD panel take the following actions WRITE PROTECT Warning Messages Card Error Messages When an SxS memory card incompatible with the memory recorder is detected an ERROR CARD message and a message indicating the cause of the card error will appear alternately at the first line of the LCD panel display For approximately two seconds When an error message appears take the following actions Message Description NO Appears when a media not supported by SUPPORT the memory recorder is inserted Action Replace it with a recommended SxS memory card FORMAT Appears when the card has already been formatted by another device Action Execute FORMAT using t
10. HOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE INFORMATION FOR CANADA RENSEIGNEMENT POUR CANADA This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la Class A est conforme a la norme NMB 003 du Canada WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION This unit should be used with 12V DC only To prevent electric shocks and fire hazards do NOT use any other power source NOTE The rating plate serial number plate is on the unit REMARQUE La plaque signal tique plaque du num ro des rie est situ e sur le cadre inf rieur de l unit CAUTION To prevent electric shock do not open the cabinet No user serviceable parts inside Refer servicing to qualified service personnel Due to design modifications data given in this instruction book are subject to possible change without prior notice THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS 1 THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND 2 THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed close to the apparatus
11. Inserting Removing the SxS Memory Card Note This product does not support the USB interface ExpressCard Use a recommended SxS memory card Specifications t Page 16 e Do not insert the SxS memory card in the reverse direction The card slot is designed such that the card cannot be inserted in the reverse direction Do not force the card into the card slot as this will cause malfunction Inserting the SxS memory card 1 Slide the tab of the card slot cover horizontally to open the cover 2 Insert the SxS memory card into the card slot Insert the card with the label facing you as illustrated below The access lamp lights up in red When the card is ready to be used the light turns green SxS memory card oa Card slot cover Open tab oy 3 Close the card slot cover Memo e If a FORMAT message appears on the LCD panel make sure to format initialize the card using the memory recorder Menu screen s MEDIA FORMAT settings Page 13 Note e SxS memory cards that are formatted using another product cannot be used on this memory recorder Write protect Switch of SxS Memory Card To disable recording or deletion of video clips to or from the SxS memory card so as to protect the recorded clips set the write protect switch at the side of the SxS memory card to WP When using a write protected SxS memory card a message indicating
12. K gt TIME ZONE UTC 05 00 O Sh PLAY STILL PREV button feat button S i FWD button e9 lt Buttons to use gt DATE 1 1 REV button T STOP button NEXT button lt CLOCK1 Setting Screen gt 1 Select the item to set TIME ZONE DATE or TIME e Press the PREV or NEXT button to select an item e After making a selection press the PLAY STILL or FWD button to confirm 2 Set the respective items Set the items listed in the table below Memo e Be sure to set the TIME ZONE before setting the DATE and TIME e The memory recorder does not support daylight savings time Item Description For setting the time difference with the UTC Universal Time Coordinate The values of the DATE and TIME items TIME ZONE will be automatically adjusted when this item is altered UTC Time Difference Chart by Region c Page 17 DATE For setting the date month day year TIME For setting the time hour minute second e Press the PREV or NEXT button to select a value followed by using the PLAY STILL button to confirm the selection e When setting DATE press the FWD or REV button to jump between month day and year When setting TIME press the same button to jump between hour minute and second 3 Press the MENU bution to return to the status screen
13. ME screen of the menu screen Changing clip name or resetting the clip number t Page 13 Displays the video format of the selected clip Video format settings s Page 12 Clip name The clip indicated by the cursor gt is the selected clip e A NO CLIP message is shown when no clip is found v mark A check mark v appears before clips that are playable ok mark Appears after the clip name You can specify the ok mark on the OK CLIP screen of the menu screen Menu screen s OK CLIP settings c Page 12 Playback position bar Displays the progress of the currently played clip in the form of a bar Memory recorder s time code settings s Page 12 Clip information Displays various information related to the selected clip Press the INFO CLR button to toggle the clip information display 00 00 00 00 Playback time code OF OF OF OF Playback user bit RD 09 07 08 Date on which clip is recorded month day year RT 11 11 11 Time on which clip is recorded hour minute second Dr 00 10 00 Clip length duration hour minute second Note e The playback time code value is not an accurate representation Use it as a guide for the playback position Selected clip Total number of clips Setup Attaching the Memory Recorder to a Camcorder Check the IEEE1394 connection method before attaching the memory recorder to the camco
14. NE switch of the camcorder to FREE GENERATOR FREE For selecting the run mode of the time code generator RECRUN Setting is enabled when TC SOURCE is set to INT REGEN FREE The time code runs according to the preset value in the free run mode RECRUN The time code runs according to the preset value when in the recording mode REGEN The time code runs continuously according to the last time code on the SxS memory card DROP NON DROP For selecting the non drop frame or drop frame mode FRAME DROP e Setting is enabled when TC SOURCE is set to INT Setting is enabled when the frame rate is set to 60 or 30 NON DROP Non drop frame mode DROP Drop frame mode 12 Menu Setting Item Setting Values Functions TC SET2 For presetting the time code generator of the memory recorder TC PRESET 00 00 00 00 23 59 59 29 or 00 00 00 00 23 59 59 24 The number of frames that can be specified are as shown below depending on the setting of the frame rate e g when the frame rate is 60 you can specify the number of frames up to a value of 58 Frame rate 60 50 Number of frames 58 48 24 23 30 29 25 24 UB PRESET 00 00 00 00 FF FF FF FF For presetting the user bit 8 digits CLIP NAME For specifying the first four characters of the clip name before recording or resetting the clip number e An ei
15. TOR GENETATOR RECRUN DROP FRAME NON DROP RECRUN DROP FRAME NON DROP lt LCD Panel gt 14 Others Troubleshooting camcorder is set to the CAM mode when the memory recorder is in playback mode Symptom Cause s Actions Refer to Power does not turn Power is supplied from the DC INPUT Attach the battery The power of the memory recorder 1 Page 7 on terminal of the camcorder cannot be supplied from the DC INPUT terminal of the camcorder Only the power of the camcorder is turned It is necessary to turn on the power of the memory recorder Page 7 On at the same time Remaining battery level is insufficient Charge the battery ce Page 14 Unable to record or The IEEE1394 cable is not connected Connect a GY HD200 HD250 series camcorder to the ts Page 7 play clip KA UM100G adapter using an IEEE1394 cable The INT EXT switch setting of the Set to EXT during normal use When IEEE1394 we Page 7 KA UM100G adapter is inappropriate connection is made internally without the use of an external cable set to INT e f the NO SIGNAL message does not disappear even if the setting is correct set the switch again to select the setting If the message remains displayed turn off and on the power again The video formats of the camcorder and Ensure that the video format of the camcorder and memory Page 9 memo
16. WRITE PROTECT will appear on the status screen of the LCD panel for about three seconds For details please refer to the instruction manual of the SxS memory card Note e Do not operate the write protect switch of the SxS memory card when it is inserted into the memory recorder Removing the SxS Memory Card Note e Do not remove the SxS memory card when the memory recorder lights up in red Before removing the card make sure that the access lamp lights up in green color 1 Slide the tab of the card slot cover horizontally to open the cover 2 Press the EJECT button at the side of the slot to unlock 3 Press EJECT button again and remove the SxS memory card SxS memory card 7 EJECT button Card slot aide i Open tab oS 4 Close the card slot cover Maximum Recording Time of SxS Memory Card The maximum recording time of an SxS memory card varies according to the format of the input signals as shown in the table below When using a 32 GB SxS memory card Max Recording Mode Video Format Time HD1 720 50p 25p 60p 30p 24p Approx 180 mins HD2 1080 50i 60i Approx 140 mins Memo The values in the table are for reference and are not guaranteed values These are not the maximum possible duration during continuous recording The maximum duration for continuous recording when the battery is f
17. ack Memo e When multiple video clips are stored in the SxS memory card the playable clips are played back continuously in sequence Playback switches to the still mode at the end of the last clip 4 Press the STOP button to stop playback of the clip The LCD panel display switches to the status screen Fast forward Fast reverse Fast forwards or fast reverses the selected clip It will switch to still mode at the end or beginning of the selected clip To switch to the still mode during fast forward or fast reverse press the PLAY STILL button E Pressing the FWD button in the still mode during playback or fast reverse Switches to the low speed fast forward F1 mode Press the FWD button again to switch to the high speed fast forward F2 mode E Pressing the REV button in the still mode during playback or fast forward Switches to the low speed fast reverse R1 mode Press the REV button again to switch to the high speed fast reverse R2 mode Skip Skips to the next or previous playable clip E Pressing the NEXT button in the still mode or during fast reverse Doing so switches automatically to the still mode after skipping to the beginning of the next clip Pressing the button twice switches to the still mode after skipping to the beginning of the second clip from the current one E Pressing the PREV button in the still mode or during fast reverse Pressing this button during playba
18. amcorder is disabled Turning On Off the Power Turning On the Power 1 Set the POWER switch of the camcorder to On 2 Press and hold down the POWER buiton of the memory recorder for at least one second The power of the memory recorder turns on After a message indicating KA MR100 POWER ON appears on the LCD panel for several seconds the status screen is displayed Memo It is necessary to set the built in clock immediately after purchasing this product or when it has not been used for a prolonged period of time three months or longer After the power of the memory recorder turns on a message indicating CLOCK SETUP MENU appears for several seconds Next the CLOCK1 setting screen is automatically displayed Setting the Date Time c Page 7 7 Turning Off the Power 1 Press and hold down the POWER button of the memory recorder for at least one second The power of the memory recorder turns off Memo You can turn off the power of the memory recorder using the POWER switch of the camcorder by setting DR HD100 A OFF on the OTHERS 2 2 menu screen of the GY HD200 HD250 series camcorder to On Note e Make use of a battery to supply power to the memory recorder Power cannot be supplied from the DC INPUT terminal of the camcorder Setting the Date Time Set the time of the built in clock on the CLOCK1 setting screen of the menu screen LJ CLOC
19. are can be found in the bundled CD ROM E For procedures on how to install the software please refer to the user s guide and instruction manual in the bundled CD ROM Precautions for Handling SxS Memory Cards E Make sure that the SxS memory card is formatted on this memory recorder SxS memory cards that are formatted on another product cannot be used on this memory recorder E Formatting an SxS memory card erases all clips that are stored on the card E Make sure to close the card slot cover before using the memory card E Do not operate the write protect switch of the SxS memory card when it is inserted into the memory recorder E For details please refer to the instruction manual of the SxS memory card Precautions for Handling Recorded Video Clips E We do not guarantee against damage of the recorded video clips if the SxS memory card is removed from the slot while data is being accessed e g during recording playback or formatting Remove the card only when the access lamp of the memory recorder lights up in green E We do not guarantee against damage of the recorded video clips in the following cases when this product is used in places subject to static electricity or electrical noises when the battery or IEEE1394 cable is removed while data is being accessed when this product is used in sandy or dusty places or when a dirty SxS memory card is used E The recovery feature does not guarantee s
20. ast two digits of the western calendar is used Press the INFO CLR button to display the default setting TIME r For setting the time hour minute second Press the INFO CLR button to display the default setting CLOCK2 For setting the date or time display mode DATE STYLE YY MM DD MM DD YY DD MM YY For specifying the display style of the date e Altering the setting of this item also changes the DATE display mode on the CLOCK1 setting screen YY MM DD Year Month Day MM DD YY Month Day Year DD MM YY Day Month Year TIME STYLE 12 24 For specifying the display style of the time e Altering the setting of this item also changes the TIME display mode on the CLOCK1 setting screen 12 12 hour display AM PM display 24 24 hour display MEDIA For setting processes related to the SxS memory card FORMAT YES NO Starts the formatting initialization of the SxS memory card e When formatting is performed all clips stored inside the SxS memory card will be cleared YES Format Press the INFO CLR button NO Do not format Press the STOP button RESTORE YES NO Scans the SxS memory card and makes attempts to restore damaged clips e However success of the restore process is not guaranteed YES Execute Press the INFO CLR button NO Donot execute Press the STOP button OTHER For configuring settings related to
21. ck of the clip switches automatically to the still mode after skipping to the beginning of the selected clip Pressing the button again skips to the beginning of the previous clip and remains in the still mode E Pressing the NEXT button during playback or fast forward Pressing the button starts playback automatically from the beginning of the next clip Pressing the button twice starts playback from the beginning of the second clip from the current one E Pressing the PREV button during playback or fast forward Pressing this button during playback of the clip starts playback automatically from the beginning of the selected clip Pressing the button at the beginning of the clip starts playback from the beginning of the previous clip 10 Menu Setting the Menu Screen MENU T e button a PLAY STILL button ens o STOP button NEXT button MENU button PREV button FWD button REV button Procedures for Setting Values 1 Press the MENU button LJ SYSTEM Menu screen gt RESOLUTION Setting item 720 Current setting value FRAME RATE 60p 2 Move the cursor gt to the item to be set by pressing the NEXT or PREV button 3 Press the PLAY STILL or FWD button fees orale Current selected setting item ii Cursor gt 7207 Current selected setting value ee Set using PLAY STILL button Return to the menu screen without s
22. d a CARD FULL message will appear for about three seconds Camcorder Panel Display CT Remaining time ww Memory recorder When connected White color m During recording Red color gt t 1394 REC TRIGGER mode 01 02 03 M01 23 45 R OFF Y SYNCRO R SPLIT F SERIES When connected Red blinking During recording Red color STBY lt Camcorder s STATUS 0 screen gt Playing Video Images Recorded in the Memory Recorder To play back video images recorded by the memory recorder select a clip from the clip selection screen on the LCD panel of the memory recorder The selected video clip is played back on the LCD monitor and viewfinder of the camcorder Memo e Before playing back video images recorded by the memory recorder stop the playback of the cassette tape in the camcorder e Images on the LCD monitor and viewfinder of the camcorder may be distorted when in the Still and Fast forward Fast reverse modes Settings Prior to Playback Before playing it is necessary to configure the camcorder and memory recorder settings E Camcorder settings 1 Set to the VTR mode using the CAM VTR button 2 Set the IEEE1394 switch to the HDV end E Memory recorder settings For procedures to set the menu screen refer to page 11 1 Set the video format e Set the RESOLUTION and FRAME RATE under the SYSTEM settings on the menu screen Page 12 Note e Set accordi
23. e menu screen refer to page 11 1 Set the video format according to the camcorder setting e Set the RESOLUTION and FRAME RATE under the SYSTEM settings on the menu screen Page 12 2 Set the time code recording method for the SxS memory card Set the three items below on the TC SET1 setting screen of the menu screen amp Page 12 Setting item Description TC SOURCE For setting the source of the time code For setting the run mode of the time code GENERATOR generator of the memory recorder DROP For selecting either NON DROP or FRAME DROP frame enabled only when the frame rate is set to 60 or 30 Set the preset time code and user bit values on the TC SET2 setting screen of the menu screen t Page 13 9 Recording to the SxS Memory Card e When the memory recorder is in the play mode press the STOP button to stop playback e There are three REC trigger buttons on the camcorder on the lens at the side and on the handle The REC trigger button to enable recording to the SxS memory card varies according to the 1394 REC TRIGGER settings e A TRIGGER TO HDV message is shown on the camcorder panel display when the REC trigger button is pressed E Hybrid recording with cassette tape when the SYNCRO setting is enabled For recording data to both the cassette tape of the camcorder and the memory recorder 1 Press any one of the REC trigger buttons
24. e menu screen is displayed press this button to confirm an item or setting value selection INFO CLR button e Switches the clip information display Page 5 e When the utility execution screen is displayed use this button to execute a process On other setting screens pressing this button restores the default settings PREV button Skips to the beginning of the selected clip or the previous clip e When the clip selection screen is displayed use this button to select a clip to play back When the menu screen is displayed use this button to select a menu item or setting value Card slot Open the cover and insert the SxS memory card c Page 8 Getting Started LCD Panel Displays During Recording or Stop Mode Displays the status screen Memo e A NO CARD message is shown when an SxS memory card is not inserted e A CARD PROTECT mark is shown before the clip if the write protect switch of the SxS memory card is turned on During Playback Mode Displays the clip selection screen 1 ESTOP 052 berr raen aeol oer 090M oe 051 052 aod 01 01 08 10 720P60 o 01 15 27 m ABCD1232 gt O 720P60 Card protect mark D VABCD1233 ok ABCD1234 VABCD1234 __ oo 00 00 00 12 Modes SxS memory card is not inserted Modes ESTOP Stop HIS S
25. eeeteeteeeeeeees 17 Copyrights e Broadcasting for profit or public viewing of the video and audio contents recorded using this product may infringe on authors rights protected by copyright law Recorded video and audio contents cannot be used without the consent of the right holder under copyright law except for personal enjoyment How to Read this Manual E Symbols used in this manual Note States precautions to be taken during operation Memo States restrictions on the functions or use of this equipment For reference purposes ig Indicates the page numbers or items to refer to E Contents of this manual e JVC holds the copyright to this manual Any part or all of this manual may not be reproduced without prior consent from the company Product names of other companies described in this manual are trademarks or registered trademarks of the respective companies Symbols such as and are omitted in this manual e Design specifications and other contents described in this manual are subject to change for improvements without prior notice e XDCAM EX is Sony Corporation s brand name for its professional video camera series e Windows is a registered trademark of Microsoft Corporation in the U S e Mac OS and Final Cut Pro are trademarks of Apple Inc registered in the United States and other countries Getting Started Precautions Storage and Operating Environmen
26. etting using STOP button pIISET W BACK 4 Move the cursor gt to the value to be set by pressing the NEXT or PREV button 5 Press the PLAY STILL button to confirm the setting The menu screen appears after the setting is changed Memo e When the setting screen is displayed pressing the STOP or REV button returns the display to the menu screen without altering the setting value 6 Press the MENU button to exit the menu screen display Procedures for Executing the Utilities 1 Select a menu item to display the execution screen of the corresponding utility The different utility items are shown below e NOW CLIP and ALL CLIP of the DELETE setting screen e ALL OK and ALL NONE of the OK CLIP setting screen Il NUMBER of the CLIP NAME setting screen e FORMAT and RESTORE of the MEDIA setting screen e ALL RESET of the OTHERS setting screen SELLE Utility item being selected 050 Execute with INFO CLR button FORMAT OK Return to the menu screen without CLR YES E NO l setting using STOP button 2 Press the INFO CLR button to execute the selected item When FORMAT or RESTORE is completed COMPLETE appears on the LCD display When FORMAT or RESTORE is in progress EXECUTE appears on the LCD display If failure occurs ERROR is displayed e After the execution message appears the display returns to the
27. figurations and Functions Values indicated in parentheses in the table below are default settings Setting Item Setting Values Functions SYSTEM For setting the format of the video to be recorded or played back Make sure that the settings are consistent with those of the camcorder Otherwise recording and playback cannot be executed RESOLUTION 720 1080 For setting the resolution FRAME RATE RESOLUTION When 720 is set For setting the frame rate The configurable frame rate may vary according to 60p 30p 50p 25p 24p the RESOLUTION setting RESOLUTION When 1080 is set 60i 50i LCD For setting the contrast and backlight of the memory recorder s LCD panel CONTRAST MAX 4 3 2 1 0 1 2 For adjusting the contrast 3 4 MIN BACKLIGHT OFF OFF Backlight is turned off at all times ON ON Backlight is turned on at all times AUTO AUTO Backlight turns on when the buttons are operated Light turns off automatically about five seconds after the buttons are operated DELETE For deleting a clip e This function is disabled when recording is in progress e Clips indicated with an ok mark cannot be deleted NOW CLIP NO Deletes the currently selected clip when in the play mode Deletes the clip that YES is last recorded when in the stop or standby mode YES Delete clips Press the INFO CLR button NO Do not delete clips Pres
28. ght digit clip name is automatically configured e Serial numbers are automatically appended as the last four digits whenever a clip is created Serial numbers are automatically appended even when SxS memory card is replaced or after changing the first four characters of the clip name at PREFIX PREFIX Last three digit of the serial number K For specifying the first four characters of the clip name Usable characters A to Z a to z 0 to 9 _ The default clip name is set as the last three digits of the serial number K Example If the serial number is 00001234 then the default clip name is 234K NUMBER RESET YES NO You can reset the clip number 0001 after changing the clip name at PREFIX If clips already exist on the SxS memory card the smallest available number will be used Example If 0001 exists on the SxS memory card then 0002 will be used YES Reset clip number Press the INFO CLR button NO Donot reset clip number Press the STOP button CLOCK1 For configuring settings related to the clock of the memory recorder TIME ZONE UTC 12 00 UTC 05 00 UTC 14 00 For setting the time difference with the UTC Universal Time Coordinate UTC Time Difference Chart by Region t Page 17 When the setting of this item is altered the DATE TIME values below will be automatically adjusted DATE CF For setting the date month day year The l
29. his memory recorder Menu screen s MEDIA gt FORMAT settings Page 13 CARD CHANGE Appears when errors are found in the clip Action Execute RESTORE or FORMAT using this memory recorder If doing so does not eliminate the error it may be due to malfunction of the SxS memory card Replace the SxS memory card RESTORE Appears when the clip may be damaged Action Execute RESTORE using this memory recorder Message Description CLOCK Appears when the clock is not set SETUP Action Set the clock when the CLOCK1 MENU setting screen appears WRITE Appears when the write protect switch of PROTECT the SxS memory card is set to the WP end Action Set the write protect switch to Off before recording or deleting a clip CARD FULL Appears when there is no more space left on the SxS memory card Action Take any of the following actions e Use an SxS memory card with sufficient space e Delete unwanted clips or format the card to create space OPERATION Appears when buttons other than the LOCK MENU button is pressed with the OPERATION menu set to LOCK Action Change the OPERATION menu setting to UNLOCK Error Messages Battery and Signal Error Messages An error message appears at the first line of the LCD panel display when the battery is weak or when there is an input signal error When an error message ap
30. ion software on a computer please refer to the user s guide or instruction manual Contents Getting Started Safety Precautions osissa ai aan E iiie Il Features A vine oan taints es 2 GONntONIS insured aiea aat 2 Preca tionS isis e ara anar e N A AAE ani 3 Name and Function of Parts ssessseseseeseeseerrerirrrerrerrrerrerrnrrereee 4 ECDiPanel Displays inini araya iein aias 5 Setup Attaching the Memory Recorder to a Camcorder sses 6 Connecting IEEE1394 n ae nial 7 Turning On Off the Power 0 eeeeceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaees 7 Setting the Date Time 00 eeceeseseeeeseeneeeseeeeeeeeaeeeeesaeeeeetaeeaeees 7 Inserting Removing the SxS Memory Card sesser 8 Maximum Recording Time of SxS Memory Card secsec 8 Operation Recording Video Images of the Camcorder Using the Memory Record sinrang onai ein area cuerccuvedstededt enestoctstesiecbestanstevstevecties 9 Playing Video Images Recorded in the Memory Recorder 10 Menu Setting the Menu Screen oe ee eeeeeeeeseeneeeeeeeeeeeeeeteeeeeeeaeeneeaes Menu Screen Configurations and Functions Others Warning Messages cece eee eceee eee eseeeeseeteeeeeeeeeeaeeeeeeeee 14 Error M SSAGES stinni giiia iaai cones cand dseeescencurcsteauders 14 MOUDIOSHOOUNG siciereieiisssieevinerdineseaheviieeediviisieteeereriuiie 15 SPecifications 0 sceeccsscecesesseesscesseeeeeseseseeceseesseassseeesenseseseseess 16 UTC Time Difference Chart by Region ceeeeee
31. l setting screen appears when the power is next turned on e Do not place objects on the memory recorder e This product cannot be used by connecting the IEEE1394 terminal of the KA UM100G adapter sold separately to the computer Please contact our authorized dealers if inspection of the interior components or repair is required Fire Hazard Electrical Shock and Injury Do not place this product on unstable surfaces as it may fall and lead to injuries or malfunction of the product When this product is attached to a camcorder carry it by holding the handle of the camcorder Do not remove or modify the cover of this product It might result in fire electrical shock or malfunction of the product e Do not insert objects other than the memory card into the card slot Inserting a metallic or flammable object may result in fire electrical shock or malfunction of the product Accessories E To use the ExpressCard slot on the computer installation of the SxS memory card device driver software is required The driver can be found in the bundled CD ROM E To copy a video clip to the computer installation of the computer application software JVC ProHD Clip Manager is required This program can be found in the bundled CD ROM 3 E To load recorded video clips to Apple Inc s video editing software Final Cut Pro installation of the Final Cut Pro plugin software JVC ProHD Log and Transfer Plugin is required This softw
32. menu screen e All operations are disabled during execution of a utility Memo e Press the STOP button to return to the menu screen without executing the selected item Procedures for Setting Time Code User Bit Preset Clip Name and Date Time 1 Select a menu item from Time Code User Bit Preset Clip Name and Date Time Time Code Preset User Bit Preset TC PRESET UB PRESET of the TC SET2 setting screen e Clip Name setting PREFIX of the CLIP NAME setting screen e Date Time setting DATE TIME of the CLOCK1 setting screen 1 TC PRESET H M S F Reset to 00 00 00 00 with INFO CLR A 00 00 00 00 button v ___ Current selected setting item Set using PLAY STILL button Return to the menu screen without setting using STOP button bIISET WBACK Memo e During setting of the time code user bit or time pressing the INFO CLR button sets all digits to OO In the clip name setting the default clip name is shown 2 Press the FWD or REV button to select the item to set 3 Alter the value of the selected item by pressing the NEXT or PREV button 4 Press the PLAY STILL button to confirm the new value The menu screen appears after the setting is changed Memo e When the setting screen is displayed pressing the STOP button returns the display to the menu screen without altering the setting value Menu Screen Con
33. nalties may be applicable for incorrect disposal of this waste in accordance with national legislation Business users If you wish to dispose of this product please visit our web page http www jvc eu to obtain information about the take back of the product Other Countries outside the European Union If you wish to dispose of this product please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment FOR USE IN CHINA ONLY EFRR mse ERINA MENRTAS AF IMME ARAR a CHLERRRT HE HF REP MIRREN MEME R REAAPAEAACRNETESSM PHS Weise SBP oa BL RR OER ALE RE IR RASTA SPE Cash Th oR AS FRAP ATF mtas ASO ASRA WH FHAR m xe a ani same oR Pb Hg Cd Cr PBB Be oe Ae 28 x o fe x o H x o x o ian G7 x o x o Hte MHE x o x O CO KEANE HOMAMeAs ASWRANBES T 1363 2006 EMEA REZA x EFHFREDA AHJAR SAS AEAEE T S T 11363 200647 ERE Features This is a memory recorder to record and play back HD format video images and audio signals on an SxS memory card via the IEEE1394 interface Use of SxS Memory Card The use of MPEG 2 Long GOP compression format and SxS memory card enables long duration recording and high speed transfer as described below e Supports long duration recording of HD images up to 180 minutes when capacit
34. ng to the format settings of the camcorder Playback cannot be executed if the camcorder and memory recorder settings are different from each other Playing a Clip from the SxS Memory Card If the memory recorder is in the standby mode press the STOP button on the recorder to switch to the stop mode ESTOP 052 PREV l ae ee iii O CA button D 01 01 08 pev l k eave button a T 01 15 27 button i oi ae button 720P60 a ABCD1234 00 00 00 00 NEXT button lt LCD Panel gt lt Buttons to use gt Normal playback 1 Press the PLAY STILL button Memo e Playable clips are indicated by a check mark v at the front of their names The clip indicated by the cursor gt is the selected clip LCD Panel Displays gt Page 5 2 Press the NEXT or PREV button to select a clip to play e Select a clip that has a check mark To play back a clip without a check mark it is necessary to configure the camcorder and memory recorder according to the video format settings which are displayed when the clip is selected 3 Press the PLAY STILL button to start playback The video clip is played back on the LCD monitor and viewfinder of the camcorder e The progress bar on the LCD panel of the memory recorder moves to indicate the current playback position e Press the PLAY STILL button during playback to switch to the still mode Press the button again to resume playb
35. ommended SxS memory card Error message DR HD100 POWER appears when the Connect and turn on the power of the memory recorder we Page 6 appears on the memory recorder is not powered on or is w Page 7 camcorder panel not connected display HDD NO 1394 SIGNAL appears if the Set the camcorder to the VTR mode rs Page 10 HDD SPACE LOW appears when the space on the SxS memory card is insufficient or an SxS memory card is not inserted Use an SxS memory card that has sufficient space 15 Specifications E Media slot Overall Power supply DC 12 V DC 10 5 V to 17 V Power consumption 6W Supported media SxS memory card Number of slot 1 slot Interface ExpressCard 34 compliant supports only PCI Express USB is not supported E Video format Recording format MP4 Recording time HD1 mode Approx 180 mins HD2 mode Approx 140 mins recording time when using a 32 GB card External 90 mm x 57 mm x 131 mm Wx D x H dimensions Weight 0 42 kg Operating 0 C to 40 C temperature Operating humidity 30 to 80 RH Storage 20 C to 60 C temperature Storage humidity 85 RH and below E Others Accessories Instruction manual x 1 Rubber sheet x 1 Warranty USA and CANADA only x 1 CD ROM x 1 File system FAT32 SxS format Maximum file size 4GB OS compatibility Windo
36. on the lens at the side or on the handle of the camcorder to start recording to the SxS memory card 2 Press the REC trigger button of the camcorder to switch between the recording and standby modes 3 Press the STOP button on the memory recorder to stop recording Memo e When a cassette tape is not inserted into the camcorder data will only be recorded to the SxS memory card E Recording only to the SxS memory card when the SPLIT setting is enabled For recording to the SxS memory card by pressing the REC trigger button at the side of the camcorder 1 Press the REC trigger button at the side of the camcorder to start recording to the SxS memory card 2 Press the REC trigger button of the camcorder to switch between the recording and standby modes 3 Press the STOP button on the memory recorder to stop recording E Series recording when the SERIES setting is enabled Recording to the SxS memory card starts automatically when the remaining capacity of the cassette tape falls below three minutes 1 Press any one of the REC trigger buttons on the lens at the side or on the handle of the camcorder to start recording to the cassette tape e Recording to the SxS memory card starts automatically when the remaining capacity of the cassette tape falls below three minutes 2 Press the STOP button on the memory recorder to stop recording Memo e When there is no remaining space left on the SxS memory car
37. ot protrude from the groove or recess 4 Attach the memory recorder to the KA UM100G adapter Align the screw holes at the back of the KA UM100G adapter with the holes on the rubber sheet Next follow the steps illustrated in to attach the memory recorder Set the hook to the guide PE Hook Memory recorder KA UM100G KA UM100G adapter Screws Mount the e d screws x2 oo Af concer B cay Connect connector B Recess Connector A Rubber sheet Connect included with the connector A memory recorder Note e Store the connection wires and connectors properly so that they do not protrude from the groove or recess 5 Attach the battery adapter to the memory recorder Align the screw holes at the back of the memory recorder with the holes on the rubber sheet Next follow the steps illustrated in to attach the rubber sheet plate for IDX adapters only and battery adapter Rubber sheet Battery adapter included with the camcorder Mount screw A x4 Screw A Mount screw B x4 Screw B F plate for IDX adapters only Battery adapter for Anton Bauer Connector Connect the connector x2 Note Store the connection wires and connectors properly so that they do not protrude from the groove or recess Memo e Battery adapters manufactured by Anton Bauer do not come with a plate 6 Attach the battery to the camcorder
38. panel can be specified on the LCD setting screen of the menu screen LCD panel contrast and backlight settings Page 12 MENU button Displays the menu screen Press this button again to restore the original screen display REV button e Fast reverses the selected clip e When the Time Code Date Time or Clip Name setting screen is displayed use this button to select a setting Camcorder connector To connect the memory recorder with a camcorder connect this connector to the memory recorder connector of the KA UM100G adapter sold separately QO POWER button Turns On Off the power of the memory recorder To do so press and hold the button for at least one second NEXT button e Skips the currently selected clip to the next clip e When the clip selection screen is displayed use this button to select a clip to play back When the menu screen is displayed use this button to select a menu item or setting value QO Battery connector For connecting to the battery adapter connector of the camcorder STOP button e Stops recording or playback e When the menu screen is displayed press this button to return to the menu screen without altering the settings D FWD button e Fast forwards the selected clip e When the Time Code Date Time or Clip Name setting screen is displayed use this button to select a setting PLAY STILL button Pauses or starts playback When th
39. pears take the following actions Message Description BAT Appears when the remaining battery level ALARM is insufficient Action Charge the battery SHUT Appears immediately before the battery DOWN runs out completely The memory recorder will shut down a few seconds after the message is displayed Action Charge the battery NO SIGNAL Appears when there is no signal input 1 Action Check the connection of the IEEE1394 cable and the camcorder settings Other Appears when the format of input signals is SIGNAL 1 different from that of the memory recorder Action Make sure that the memory recorder settings are consistent with those of the camcorder t Page 9 1 Appears during the recording or stop mode Card error message appears when the following operations are performed e When an SxS memory card is inserted When power is turned on with an SxS memory card inserted E When in the stop standby or still mode Status screen stop or standby REMAIN D 01 01 08 D 01 01 08 T 11 22 25 T 11 22 25 720P60 720P60 00 00 00 00 00 00 00 lt LCD Panel gt Clip selection screen still ERROR CARD Ip NicaRD CHANGE 720P60 ABCD1232 gt v ABCD1233 ok vABCD1234 720P60 ABCD1232 gt vABCD1233 ok vABCD1234 00 00 00 00 00 00 00 00 lt LCD Panel gt E When in the menu screen display gt TC SOURCE gt TC SOURCE INT INT GENETA
40. rder For details please refer to Connecting IEEE1394 c Page 7 Note e The KA MR100G adapter sold separately is required to attach the memory recorder to a camcorder Memo e Two different types of battery adapters manufactured by IDX and Anton Bauer respectively are available depending on the country region where the camcorder is purchased 1 Remove the battery from the camcorder 2 Remove the battery adapter from the camcorder Follow the steps illustrated in below to remove the battery adapter followed by the plate for IDX adapters only and rubber sheet from the camcorder Rubber sheet included with the camcorder Battery adapter Remove screw A x4 Remove screw B x4 Screw A Screw B Plate for IDX attery adapter adapters only Connector y p or Anton Bauer ow Remove connector x2 Memo e Battery adapters manufactured by Anton Bauer do not come with a plate 3 Attach the KA UM100G adapter sold separately to the camcorder Align the screw holes at the back of the camcorder with the holes on the rubber sheet Next follow the steps illustrated in to attach the KA UM100G adapter Rubber sheet included with KA UM100G KA UM100G adapter Screws Mount the Cf screw x4 l Connector Connect the connector x2 E recess Note Store the connection wires and connectors properly so that they do n
41. ry recorder are not consistent with recorder are consistent with each other each other The IEEE1394 switch of the camcorder is Set the IEEE1394 switch to the HDV end we Page 9 set to the DV end If the NO SIGNAL message does not disappear even we Page 10 after setting to HDV set the switch again If the message remains displayed turn off and on the power again Recording does not The camcorder is set to the VTR mode Set to the CAM mode using the CAM VTR button te Page 9 start The 1394 REC TRIGGER item on the Set 1394 REC TRIGGER to SYNCRO or SPLIT te Page 9 OTHERS 2 2 menu screen of the When this is set to SERIES recording starts when the camcorder is set to OFF or SERIES remaining capacity of the cassette tape falls below three minutes The memory recorder is set to the playback Press the STOP button to stop playback ts Page 9 mode The write protect of the SxS memory card Set the write protect switch to Off before recording or we Page 14 is enabled deleting a clip There is no space left on the SxS memory Use an SxS memory card that has sufficient space we Page 14 card Unable to play clip The camcorder is set to the CAM mode Set to the VTR mode using the CAM VTR button 1 Page 10 The cassette tape is currently being played Stop playback of the cassette tape before playing back ts Page 10 back data on the SxS memory card A
42. s the STOP button ALL CLIP NO Deletes all clips YES YES Delete clips Press the INFO CLR button NO Do not delete clips Press the STOP button OK CLIP For important clips or clips that you do not want to delete specify them as OK clip Upon specifying a clip as an OK clip an ok mark will appear to the right of the clip name on the clip selection screen NOW CLIP NONE For specifying a selected clip as an OK clip when in the playback mode For OK specifying the clip that is last recorded as an OK clip when in the stop or standby mode NONE Do not specify an OK clip Press the PLAY STILL button OK _ Specify an OK clip Press the PLAY STILL button ALL OK NO For specifying all clips as OK clips YES YES Specify as OK clips Press the INFO CLR button NO Retain current settings Press the STOP button ALL NONE NO Cancels all OK clip specifications YES YES Cancel OK clip specifications Press the INFO CLR button NO Retain current settings Press the STOP button TC SET1 For configuring settings related to the time code of the memory recorder TC SOURCE INT For selecting the source of the time code EXT INT The time code runs according to the value of the memory recorder s time code generator EXT The time code runs according to the value of the time code from the camcorder When EXT is selected make sure to set the TC GE
43. sentative of Victor Company of Japan Limited is JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Germany Sehr geehrter Kunde sehr geehrte Kundin dieses Ger t stimmt mit den g ltigen europ ischen Richtlinien und Normen bez glich elektromagnetischer Vertr glichkeit und elektrischer Sicherheit berein Die europ ische Vertretung f r die Victor Company of Japan Limited ist JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Deutschland Information for Users on Disposal of Old Equipment European Union Attention This symbol isonly valid in the European Union This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end of life Instead the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment recovery and recycling in accordance with your national legislation By disposing of this product correctly you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more information about collection point and recycling of this product please contact your local municipal office your household waste disposal service or the shop where you purchased the product Pe
44. t E Do not store this product in the following environments Doing so may result in malfunction or failure Hot or cold locations beyond the allowable operating temperature range of 0 C to 40 C e Locations beyond the allowable operating humidity range of 30 RH to 80 RH no condensation Near equipment that emits strong magnetic fields such as transformers or motors e Near equipment that emits radio waves such as transceivers and mobile phones e Locations with excessive dust and sand e Locations that are subjected to strong vibrations e Locations prone to moisture such as window side e Locations that are subjected to steam or oil such as kitchens e Locations that are subjected to radiation X rays or corrosive gases Precautions for Handling the Memory Recorder e When connecting and recording with a camcorder other than GY HD200 GY HD250 the recording may not work properly e Playing back clips that are created on devices other than the KA MR100G Memory Recorder may result in distorted images and choppy sound e Please do not use the battery that cannot be connected with this product e Make sure that the power switch is turned off before removing the battery Failure to do so may result in malfunction of the memory recorder or SxS memory card e Do not unplug the IEEE1394 cable during recording or playback e When power is not supplied for a prolonged period of time three months or longer the initia
45. till gt P Playing REC Recording prt Fast forward lt 4 lt R1 Fast reverse IISTBY Standby pause low speed low speed ay i mero Fast forward lt 4 lt R2 Fast reverse Remaining capacity high speed high speed Displays the remaining time minutes of the SxS memory card O Video format Date Shows the date of the built in clock The month day year display format can be specified on the CLOCK2 DATE STYLE screen of the menu screen Setting the Date Time Page 7 13 O Time Shows the time of the built in clock The time display format 12 hour 24 hour can be specified on the CLOCK2 TIME STYLE screen of the menu screen Setting the Date Time Page 7 13 Video format Shows the video format selected on the SYSTEM screen of the menu screen Video format settings Page 12 Time code User bit Displays the time code or user bit to be recorded Press the INFO CLR button to toggle the display 00 00 00 00 Time code OF OF OF OF User bit Memo The time code display differs depending on whether non drop frame or drop frame mode has been selected in the DROP FRAME setting Non drop frame mode Drop frame mode 00 00 00 00 00 00 00 00 Total number of clips Displays the total number of clips recorded in the SxS memory card Clip name Displays the name of the clip that is going to be recorded The clip name can be specified on the CLIP NA
46. uccessful recovery of the damaged files JVC shall not be liable for any damage or loss of the recorded video clips We strongly recommend that you create a backup for important video clips Maintenance E Turn off the power before performing maintenance E Wipe this product using a soft cloth Wiping with thinner or benzene may melt or tarnish its surface For tough stains wipe using a cloth that is dipped into a neutral detergent diluted with water followed by wiping with a dry cloth E Contact with rubber or plastic products over an extended period of time may cause the outer surface of the product to deteriorate or the paint to peel off Saving Energy E If this product is not to be used for a long time turn off the power of the system for safety and energy conservation reasons Name and Function of Parts MENU INFO CLR o fye OF Cr T I 5 O O 6i O Access lamp Displays the status of the SxS memory card Light off SxS memory card is not inserted Green light Data in the card is not being accessed Red light Data is currently being accessed e g recording playback or formatting in progress e Before removing the SxS memory card make sure that the access lamp lights up in green color LCD panel Displays the status clip selection and menu screens c Page 5 10 11 Memo e The contrast and backlight settings of the LCD
47. ully charged varies according to the battery type Operation Recording Video Images of the Camcorder Using the Memory Recorder To record video images of the camcorder using the memory recorder operate using the REC trigger button on the camcorder Each time a recording is started and stopped a clip is created in the SxS memory card Settings Prior to Recording Before recording it is necessary to configure the camcorder and memory recorder settings E Camcorder settings 1 Set to the CAM mode using the CAM VTR button 2 Set the IEEE1394 switch to the HDV end e The memory recorder does not support the DV format 3 Set the video format e g 720 60p Set according to the video format settings of the memory recorder Memo e The GY HD200 B series camcorders can record in the 1080 format Check the name plate on the camcorder 4 Select a method for recording to the SxS memory card Select the method to record to the SxS memory card from the 1394 REC TRIGGER item of the OTHERS 2 2 menu screen Setting Recording Method Records only to the cassette tape of the camcorder x Data is not recorded in the SxS memory card OFF SYNCRO For hybrid recording SPLIT Records only to the SxS memory card SERIES For series recording x For details please refer to the instruction manual of the camcorder E Memory recorder settings For procedures to set th
48. wich k UTC 13 30 UTC 00 30 a UTC 13 00 UTC 01 00 Azores UTC 12 30 UTC 01 30 UTC 12 00 New Zealand UTC 02 00 Mid Atlantic UTC 11 30 Norfolk Island UTC 02 30 UTC 11 00 Solomon Islands UTC 03 00 Buenos Aires UTC 10 30 Lord Howe Is UTC 03 30 Newfoundland UTC 10 00 Guam UTC 04 00 Halifax UTC 09 30 Darwin UTC 04 30 UTC 09 00 Tokyo UTC 05 00 New York UTC 08 30 UTC 05 30 UTC 08 00 Beijing UTC 06 00 Chicago Denver UTC 07 30 UTC 06 30 UTC 07 00 Bangkok UTC 07 00 Denver UTC 06 30 Rangoon UTC 07 30 UTC 06 00 Dhaka UTC 08 00 Los Angels UTC 05 30 Bombay UTC 08 30 UTC 05 00 Islamabad UTC 09 00 Alaska UTC 04 30 Kabul UTC 09 30 Marquesa Islands UTC 04 00 Abu Dhabi UTC 10 00 Hawaii UTC 03 30 Tehran UTC 10 30 UTC 03 00 Moscow UTC 11 00 Midway Island UTC 02 30 UTC 11 30 UTC 02 00 Eastern Europe UTC 12 00 Kwajalein UTC 01 30 UTC 01 00 Central Europe UTC 00 30 MEKA AEE CRED PARRA Al fedk ERTAK 2A IE BE KL 316 25 ti hie H 200942 41H 2009 Victor Company of Japan Limited LST0838 001A
49. ws XP Vista Mac OS X Connectable HD camcorders GY HD200 and GY HD250 series E Input signal format Optional products KA UM100G adapter Mount kit for connecting a GY HD200 GY HD250 series HD camcorder to a memory recorder Video lt HD1 mode gt MPEG 2 MP H 14 720 50p 25p 60p 30p 24p 8 bit 19 5 Mbps CBR lt HD2 mode gt MPEG 2 MP H 14 1080 50i 60i 8 bit 25 Mbps CBR Recommended products lt SxS memory card gt SBP 8 8 GB SBP 16 16 GB and SBP 32 32 GB lt IEEE1394 cable gt CFS 6R016R09 07 etc Please consult your authorized dealers Audio 16 bit 48 kHz 2ch 384 kbps MP2 Time code signal Compliant with SMPTE EBU standard Dimension Unit mm inch KA MR100G KA UM100G adapter sold separately Weight 0 145 kg e Power temperature humidity and environment conforming to KA MR100G 119 5 x Specifications and appearance of this memory recorder and related products are subject to change for further improvement without prior notice 16 UTC Time Difference Chart by Region Japiooey Aioweayy 5OOLYIN V z E Setting Values Time Zone Setting Values Time Zone a UTC 14 00 UTC 00 00 Green
50. y is 32 GB and mode is set to 720p e Enables high speed data transfer to a computer thus enhancing workflow efficiency Attachment to Professional HD Camcorders e This memory recorder can be attached to the GY HD200 HD250 HD camcorder series to enhance shooting that requires a high level of mobility e Besides recording to SxS memory cards hybrid recording and series recording through combined use with cassette tapes are also supported Use of MP4 File Format x1 e MP4 file format compliant file format used on the XDCAM EX x Play back compatibility may be not guaranteed on the different type products due to variation of supported recording mode 1 MP4 File Format This format adopts the Professional Memory Card System Format licensed from Sony Corporation The following are included in the bundled CD ROM lt Softwares gt e SxS memory card device driver software for computers e Computer application software JVC ProHD Clip Manager e Plugin software for Final Cut Pro JVC ProHD Log and Transfer Plugin 1 x1 Final Cut Pro is a video editing software developed by Apple Inc lt Documents gt e KA MR100G instruction manual Japanese English German French Italian Spanish Russian and Chinese versions e SxS memory card device driver software installation guide e JVC ProHD Clip Manager user s guide JVC ProHD Log and Transfer Plugin user s guide For procedures on how to install the applicat
Download Pdf Manuals
Related Search