Home

JVC LT-20DA6SSP User's Manual

1. Megalogic A trademark of Grundig Corpo ration SMARTLINK A trademark of Sony Corpora tion Downloading data to VCR The VCR will automatically download the reg istered data on the TV channels from the TV This means you do not need to set up the programme channels on your VCR manually The T V LINK menu will be displayed when you press the Q button while PROGRAM menu is displayed T V Link DOWNLOAD TV gt VCR gt Continue Cancel If you do not have a T V LINK compatible VCR select Cancel and press gt or OK button to exit the menu Press gt or OK button to start downloading data to VCR TRANSFER is displayed in the menu T V Link DOWNLOAD TV gt VCR TRANSFER If FEATURE NOT AVAILABLE is displayed download was not performed correctly Before trying to download again check that e The VCR power is turned on e The VCR is T V LINK compatible e The VCR is connected to EXT 2 e The scart cable is fully wired Direct REC You can easily record to VCR the images that you are watching on the TV For details read the manual for your VCR Use your VCR con trols you can not carry out Direct REC using your TV control When the VCR is not ready For example when there is no tape inserted NO RECORDING is displayed When you press the following buttons II E TV DTV ZOOM amp gt AV MENU l SUBTITL
2. P or OK buttons Source DIGITAL TV EXT 1 EXT 2 EXT 2 S EXT 3 EXT 4 Select the available sources of DIGITAL TV EXT 1 EXT 2 EXT 2 S EXT 3 EXT 4 EXT 4S or PC using A or W button and by press ing lt q P or OK buttons Sound in PC mode e Connect the PC s Audio output to the TV s PC Audio In socket with an audio cable e On your remote control using button to select sound source from TV EXT 1 EXT 2 EXT 3 EXT 4 PC and DIGITAL op tions e When PIP is displayed on the screen J button allows you to switch sound between PC and selected PIP source No Signal and Out Of Range Detection PC mode In PC Mode as no menu is displayed in case that there is no PC input to the TV it is dis played an OSD message No input signal detected then the power lamp turns to orange and PC will switch to PC standby mode Press AV but ton digit buttons or PNY PM buttons to exit standby mode aye In PC Mode if the resolution and the vertical frequency is not supported by the concept it is displayed an OSD message Signal out of range Analogue Teletext Teletext is an information system that displays text on your TV screen Using the Teletext in formation system you can view a page of in formation on a subject that is available in the list of contents index On screen display is not available in text mode Contrast bright
3. out PSTISTD 99 SO09 099008 DECODER PC Input Typical Display Modes The display has a maximum resolution of 1360x768 vertical sync frequency range of 50 75 Hz and a horizontal sync frequency range of 30 69 KHz The following table is an illustration of some of the typical video display modes Mode Resolution Frequency ayn Vertical Hor kHz Ver Hz 1 400 31 5 60 2 eso 400 ats 70 3 640 480 315 60 4 5 6 7 800 600 352 5 8 800 600 379 60 9 80 600 481 72 10 800 600 469 75 114 1024 768 484 60 12 13 1024 768 600 75 14 1280 720 446 60 15 1360 768 4 amp 7 60 The native resolution of the TFT LCD Panel is 1366 x 768 Therefore using Mode 15 is advised to get the best PC input display quality 41 Tips Can not turn the TV on Check that TV VCR DVD switch is set to TV position TV may go to stand by mode when you turn the TV on soon after you turn the TV off If you can turn the TV on again it is not a problem Can not turn the TV off Check that TV VCR DVD switch is set to TV position Care of the Screen Clean the screen with a slightly damp soft cloth Do not use abrasive solvents as they may damage the TV screen coating layer Colours of image on screen are abnormal Have you selected the correct TV system Is your TV set or house aerial located t
4. A or W button then enter the Sound menu by pressing lt q P or OK buttons The items in this menu are described at Sound menu starting page 28 PIP Picture In the Main menu select PIP Picture using A or W button then enter the PIP Picture menu by pressing lt 4 P or OK buttons This menu is displayed when PIP is displayed on the screen Otherwise PIP No Signal message will be displayed at the bottom of menu PIP Picture gt Contrast Bright 1 Colour Sharpness PIP Size PIP Position RESET PIP picture is displayed on the screen by C3 button Contrast Bright 1 Colour and Sharpness are described at Picture menu on page 26 Setting PIP Size e Using A or W button select PIP Size Press lt q or P button to change PIP size Two different PIP sizes are available Setting PIP Position e Using A or W button select PIP Posi tion Press lt q or P button to change PIP posi tion There are four different PIP positions Programme in the PIP window can be changed by PNY PW digit buttons or AV button All EXT modes Except EXT 3 are also available in PIP window PIP window is re moved from the screen by C button Source Menu In the Main menu select Source using A or W button then enter the Source menu by pressing lt q
5. BBC ONE 00 00 o BBC ONE oo 00 of 00 00 BBC ONE 00 00 ol 10 BBCONE 00 00 ol Select Programme Confirm Timer Cancel 3 Use the A W buttons number but tons and OK button to set the timer e When setting the start time and end time in put 1200 for 12 00 PM 1500 for 3 00 PM and 0000 for 12 00 AM Name Use the lt q P buttons to choose the chan nel for which the timer is to be set Press the W button Start Set the timer start time with the number but tons e When the lt q P buttons are pressed the input position moves 19 Press the W button End Set the timer end time with the number but tons When the lt q P buttons are pressed the input position moves Press the W button Date Set the date for the timer to work with the num bers e When the lt q P buttons are pressed the input position moves Press the Ww button Mode Use the lt q P buttons to choose the timer mode Once Daily Weekly and then press the OK button 4 Prepare your VCR for recording When recording ona T V LINK compatible VCR 1 Insert the videotape for recording into the VCR and set the recording mode 2 Make sure the VCR is ready to receive Di rect Rec commands from the TV 3 Make sure VCR timer settings do not coin
6. Another way of selecting a channel is with the electronic programme guide or EPG Like the Channel List the EPG screen displays a list of the stored channels along with information on what programmes are being broadcast Using the Electronic Programme Guide EPG can display 7 days programme guide but in some areas only current and next programme guide is displayed By using EPG you can select the channel and set the reminder for the programme which you do not want to miss To display the EPG screen press the GUIDE button while watching Digital terrestrial broad casting You can exit the EPG screen by pressing the GUIDE button again or the MENU button uA 7 Q Current date and time Channel listings 3 Selected date and time Programme name and broadcast time Brief description of the programme e The programme name broadcast time and a brief description of the programme are displayed for the programme chosen from the channel listings Choosing Channel 1 Press 4 or W buttons to choose the channel 2 Press OK button The selected channel is displayed Programme Reminders You can easily set the reminder so that you will not miss the programme you want to watch 1 Press 4 or W buttons to choose the channel 2 Press the Red and Green buttons to change the time and Yellow and Blue but tons to change the date 3 Press lt q or P buttons and then 4
7. My ENGLISH CASTELLANO InteriArt LT 20DA6SSP TV CON PANEL LCD PANORAMICA MANUAL DE INSTRUCCIONES D3 Digital Video Broadcasting Trade Mark of the DVB Digital Video Broadcasting Project 1991 to 1996 Number 4138 50087315 2006 Victor Company of Japan Limited 0506TKH VT VT Contents FOr your safety xisintceta tiie 2 Where to install ccccecececececececeeeseees 5 Important Information c ccsceeee 6 Control Panel Buttons c2ceseeeeees 7 Using the Stand ceccceeeeeeeeeeeeeeeeeeeees 8 Remote Control Buttons c0 0ee 9 FEAUIFES teicher ee 10 Getting Started isernia 11 MeN TEIN Rear E E E E 15 Basic Operations cccscceessseeeeeeeeeees 16 Operating while watching IDTV 17 Everyday Operation ccccccceeeees 17 Digital Teletext cccccceceseeeeseeeees 18 DTV Menus cee ee ds 18 Timers DTV Timer Recording 19 Configuration 200 eee cece cece ee eeeeeee anes 21 VENU a cere bard ea AN 21 EQiIPPR LISt 2 22555 oho Skee a 22 Installation cc cece ecececececececececeaeees 24 Common Interface c ccccceeeeees 25 Setting The TV cccccceesssseeeeeseeeeeeees 26 Menu System cccccceecccseseseeeseeees 26 Picture Menu c ccccececececececeaeess 26 Sound Menu sranane aa 28 Feature Menu ccccececececececececs 29 Install Menu oe esi tern oe
8. e Insert two AA R6 dry cell or equivalent type of batteries inside e Replace the battery cover NOTE Remove the batteries from remote control when it is not to be used for a long penod Otherwise it can be damaged due to any leakage of battery Old batteries must be disposed in a designated area If performance of the remote control reduces replace the battenes with the correct type Do not combine a used old battery or a new one or mixed battery types Remove dead battenes immediately to prevent acid from leaking into the battery compartment Step 3 Removing the terminal cover There are connection terminals and a card socket behind the covers of the rear of the TV Remove the cover before connecting an antenna VCR DVD and other devices Remove the covers by removing the hooks When replacing the covers place the side or bottom of the covers against the TV and insert the hooks e Leave the covers off if they do not fit properly DO NOT force to replace the covers Doing so may cause damages of the connection cables and the covers e Leave these covers off when mounting the TV on a wall 11 e 100 mm mount based on VESA regulation is equipped e The handle and the stand can be left by loosing the screws with a screwdriver when mounting the TV on a wall e Spread a soft cloth on a flat table and then place the TV on the cloth with the screen facing downwards when you leave the handle and the stand Step 4 Connectin
9. JOIOLIOEOL OE Peripheral Equipment Connections 00090000000 K ON ON kos aae do a S mooo A DC IN oe Y PC INPUT Pb EXT 3 Pr Component Audio In R EXT 2 Component Audio In L EXT 1 ANTENNA S Video In PC AUDIO IN Video In EXT 4 Audio R Audio L HEADPHONE AUDIO OUT TERMINAL Audio R CARD SLOT Audio L Digital Audio Out Coaxial 39 Antenna Connections Outdoor Antenna Connections VHF antenna Round 75 ohm coaxial cable A VHF UHF antenna Flat 300 ohm twin lead cable _ ff ice wz Rear of TV Round 75 ohm coaxial cable I avoid IN VIDEO Poe oO Oe IN
10. OOOO O gt Volume Bass Treble Balance Hyper Sound On Audio Out Sound Mode Mono Setting Bass Level e Using A or W button select Bass Level e Press P button to increase bass level Press lt q button to decrease bass level Setting Treble Level e Using A or W button select Treble Press P button to increase treble level Press lt q button to decrease treble level Setting Balance It allows adjusting the distribution between the left and right speakers e Using A or W button select Balance Press P button to change balance right ward e Press lt q button to change balance left ward Hyper Sound e Using A or W button select Hyper Sound e Pressing lt q or P button will turn on or off this feature Pseudo spatial effect can be turned on or off via the Hyper Sound item in the Sound menu or by remote control In Mono transmission the left and right channels will be added at left channel and dummy stereo effect will be in troduced to end user In stereo transmission it yields a phase differ ence between left and right channels To Change Audio Out Settings Audio Out is a sub menu of Sound menu Use this settings to adjust volume for audio out terminal which is located at the right side of the TV e Using A or W button select Audio Out Press lt q or P
11. Press PN or PAA buttons on the right side of the TV or on the remote control so that last switched off programme is selected By either ways the TV will switch on and the power lamp will become green To switch the TV off Press the P button on the remote con trol or on the right side of the TV so the TV will switch to stand by mode and the power lamp will become red NOTE To switch the TV off completely remove the mains plug from the socket Step 7 Initial settings When the TV is first turned on it goes into the initial settings mode Follow the instructions on the screen display to make the initial set tings Note If the TV does not go into the initial settings mode this is because your TV has already been turned on for the first time Perform the initial settings with INSTALLATION see page 24 in the DTV menu and AUTO STORE Analogue see page 31 inthe PROGRAM menu Because this is the first time that IDTV has been used there are no channels stored in the memory and below information will be dis played on the screen 1 Press the OK button to start the automatic search PR List Empty Start automatic search The IDTV will automatically tune to the UHF transmission channels 21 to 68 looking for digital terrestrial TV broadcasts and display ing the names of channels found This pro cess will take about five minutes To cancel searching you can press MENU button at
12. button or BACK button to store the value Vertical Position This item shifts the image vertically towards the top or bottom of the screen e Select Ver Position item by using A or W button Use lt q or P button to adjust the value e Press MENU button or BACK button to store the value Dot Clock Dot Clock adjustments correct interference that appear as vertical banding in dot inten sive presentations like spreadsheets or para graphs or text in smaller fonts Use lt M or P button to adjust the value Clock Phase Depending on the resolution and scan fre quency that you input to the TV Set you may see a muddy or noisy picture on the screen In such a case you can use this item to get a clear picture by trial and error method Use lt q or P button to adjust the value PC Picture Menu In the Main menu select PC Picture using A or W button then enter the PC Picture menu by pressing lt q P or OK buttons Contrast Bright 1 and Colour Temperature adjustments in this menu are identical to ad justments defined in TV picture menu R G and B adjust the TV image colour in PC mode You can change the TV colour to your desired colour R Red G Green B Blue 34 PC Picture gt Contrast O O Bright 1 OO i Manual Colour Temp Sound Menu In the main menu select Sound using
13. Here you can preview any channel stored by the receiver before viewing it full screen The complete list of channels is displayed in pages of 19 channels at a time with their channel list number and a favourite channel icon if appro priate Choosing a channel The chosen channel is shown on the quarter screen 1 Press the lt P buttons and choose Select on the bar at the bottom of the screen 2 Press the A W buttons and choose a channel and then press the OK button The picture of the chosen channel is shown on the quarter screen Deleting a channel 1 Press the lt q P buttons and choose Delete on the bar at the bottom of the screen 2 Press the A W buttons and choose the channel to be deleted and then press the OK button The channel deletion confirmation window appears 3 Choose Yes and press the OK button The chosen channel is deleted e If you do not want to delete the chosen chan nel choose NO and press the OK button e Perform Installation see page 24 to re register a channel that you have deleted Editing a channel name 1 Press the lt q P buttons and choose Edit Name on the bar at the bottom of the screen 2 Press the A W buttons and choose the channel to be edited and then press the OK button The EDIT window appears 3 Press the A W buttons and choose a character press th
14. Sleep Timer Child Lock Language gt EXT 2 Output Blue Back Off Off English TV Off Sleep Timer Child Lock Language EXT 2 Output Blue Back Off Off English TV Off Sleep Timer The Sleep Timer is used to turn the TV off after a defined period of time after selecting this item The timer can be programmed between Off and 120 minutes in steps of 10 minutes Off 010 020 030 040 120 If sleep timer is activated at the end of the selected time the TV goes automatically to stand by mode Child Lock You can use this feature to prevent children turning the TV on off or changing programmes or adjustments etc without remote control e Using A or W button select Child Lock e Press lt C P button to select Child Lock On or Off The Child Lock feature can be set On or Off by lt q P button When Off is selected there will be no difference in the operation of your TV When On is selected the TV can only be controlled by the remote control In this case the control panel buttons except button on the right side of the TV will not work Selecting Menu Language e Using A or W button select Language e Press lt q or P button to select menu lan guage Blue Back During No Signal The Blue Back Feature can be set by A or Y button to either On or Off To Store Settings In Feature menu all settings are stor
15. TOP COVER With certain combinations of connectors and leads the back cover may not be easily fitted If the cover is left off this in no way infringes safety requirements Era Using the stand This TV comes with a Table Top Stand already attached This stand can be used to adjust the direction of the TV screen 10 backward and 5 forward Tilt the TV up and down While holding the bottom of the stand with one hand use your other hand to hold the middle of the top of the TV and slowly tilt the TV up and down Remote Control Buttons dd Stand By button D TV VCR DVD Switch 3 Number buttons 4 AV button EXT 1 EXT 2 EXT 2S EXT 3 EXT 4 EXT 4S PC DIGITAL TV 5 Colour button 6 MENU Menu button Da Cursor Up button OK button 9 Cursor Right button BACK Back button ap lt 1 Volume buttons 12 GUIDE button 13 TV RADIO No Function E SUBTITLE button 15 I I Audio Language PC Control buttons D C Hyper Sound On Off button ZOOM Zoom button V V buttons IDTV VCR DVD Teletext Control buttons 21 PAIV buttons 22 W Cursor Down button 23 E Teletext button lt Cursor Left button 25 TV DTV button nformation Button T V Link in Program Menu 27 aq Mute button 27 ONO 0O Qe OG RM C1897S D D 0000 amp POW Features e It is a remote controlled Integrated Digital colo
16. WARNING Do not turn off the main power e You can watch analogue terrestrial broad casting channels or the pictures via an Ext terminal e Please note that any programme informa tion that appears on the screen such as when making changes to the Digital terres trial broadcasting DVB T channel picture will be superimposed over the picture in the VCR recording e When you press the following buttons AV MENU amp SUBTITLE GUIDE BACK PYV I PAN number buttons dur ing recording a message appears asking if you want to stop recording or not Press OK button to stop recording or BLUE but ton to continue recording Cancelling the timer setting Display the TIMER MENU and press the A W buttons to choose which timer setting to cancel Press the lt q P buttons so that Inactive appears in the Mode column 20 Reactivating the cancelled timer setting Display the TIMER MENU and press the A W buttons to choose which timer setting to reactivate Press the lt q P buttons so that Active appears in the Mode column Configuration Set the basic setting when watching Digital terrestrial broadcasting DVB T Choose configuration and press the OK but ton CONFIGURATION appears CONFIGURATION Menu al Engish gt Audio Language lt li gt Subtitle English o Software Version Vis Parental Settings Change preferred a
17. any time during the process HINT Depending on the reception conditions in your particular area you may find that the list of channels found includes one or more repeated names This is because the receiver may detect and store some channels includ ing those it cannot receive clearly from adja cent areas alongside the strong channels from a transmitter nearby This is not a problem and the weaker channels can be deleted from the receiver later as described in Edit PR List on page 22 2 When the automatic search has finished the EDIT PR LIST menu appears e If you want to you can now edit the programme numbers PR using the EDIT PR LIST function For details see Edit PR List on page 22 e If you do not want to edit programme num bers PR go to the next step 3 Press the MENU button The EDIT PR LIST menu disappears and the following message appears Do you want to search for analogue channels w If you select Yes Analogue terrestrial broad casting AUTOMATIC PROGRAMMING SYSTEM A P S window is displayed Auto Program Please Check Antenna Cable Auto Programming System English nT Language gt Country 14 To cancel APS before starting press BLUE button First of all choose the Language which the menus of the analogue part of the TV will ap pear AS soon as you change the language the menu items will be displayed in the se
18. cide with the TV timer settings e For details see your VCR instruction manual When recording ona T V LINK incompatible VCR 1 Insert the videotape for recording into the VCR and set the recording mode 2 Set the VCR recording timer settings 3 Make sure that the start and end time match with the TV timer 4 Set the VCR to record the signal from the external input that the TV is connected to e For details see your VCR instruction manual When you have finished the step 4 you have set the timer When you are not watching TV make sure the TV is in stand by WARNING Do not tum off the main power The timer func tion will not work with the main power switched off The TV power lamp begins flashing before the timer start time When you are watching TV at that time a message appears on the screen to inform you the timer is about to start e When performing timer recording with a T V LINK compatible device test the timer re cording before you record the programme There are some T V LINK compatible re cording device that will not correctly receive the Direct Rec command from the TV If the recording device does not operate when the recording start time is reached it means VCR is not receiving the Direct Rec command from the TV In this case follow the instructions of When recording on a T V LINK incompatible VCR While the timer is in operation e You can turn the TV on or off Stand by
19. eee 37 Peripheral Equipment Connections 37 Via the Euroconnector cc000 37 T V LINK compatible VCR 37 RGB MOE aerer ana E 37 EXT 2 S Mode ccccceeccceeeceeeeeeeeeees 37 Via the RCA jacks 0 0 cccceeceeceeeeeeees 37 Via the ANT aerial socket 38 DOCOCED A 38 TV and Video Recorder VCR 38 NTSC Playback visits consucere neater erie 38 Camera and Camcorder 38 Connect the decoder to the video FECOlO E cena a RE 38 Connecting Headphones 38 Connecting the PC ceeccee eee 38 To connect to S Video input 38 Peripheral Equipment Connections 39 Peripheral Equipment Connections 40 Antenna Connections ccceseeeeees 40 PC Input Typical Display Modes 41 TIPS ee eee 42 Specifications ccccceseeeesseeeeeneeeeneees 43 For your safety This equipment has been designed and manufactured to meet international safety stan dards but like any electrical equipment care must be taken if you are to obtain the best results and safety is to be assured So please read the points below for your own safety They are of a general nature intended to help you with all your electronic consumer products and some points may not apply to the goods you have just purchased Some DOs and DON Ts for you Air Circulation Leave at least 10cm clearance around
20. lected language By pressing the A or Ww button come to the Country item and select the country This will affect the sort process in APS Press RED button to start A P S After APS is finalized a programme list will appear on the screen In the programme list you will see the programme numbers and names assigned to the programmes If you press the BLUE button at any time while the A P S is running the A P S will be ended If you do not accept the locations and or the programme names of programmes you can change them in Program menu For details see PROGRAM menu on page 30 If you do not have a T V LINK compatible VCR press MENU button to exit the menu If you have a T V LINK compatible VCR con nected to the EXT 2 terminal press fi but ton to display T V LINK menu Then follow the operating procedure Downloading data to VCR in the following T V LINK section T V LINK When a T V LINK compatible VCR connected to the EXT 2 terminal on the TV it is easier to set up the VCR and to view videos T V LINK uses the following features To use T V LINK functions A T V LINK compatible VCR means a JVC video cassette recorder with the T V LINK logo or with one of the following logos For details see your VCR instruction manual Q LINK A trademark of Panasonic Corpora tion Data Logic A trademark of Metz Corpora tion Easy Link A trademark of Philips Corpora tion
21. of the signals which can be input Stereo mini jack 3 5 mm diameter Card Slot for the Conditional Access Module CAM x1 537 mm x 414 mm x 214 mm 537 mm x 377 mm x 97 mm TV only 6 5 kg with stand 5 5 kg TV only Remote control unit x 1 RIM C 1897S AA R6 dry cell battery x 2 AC adapter x 1 Power cord x 1 Stereo mini jack 3 5 mm diameter Yes Wall Mount Hole Pitch 100mmx100mm 4 holes 43
22. subtitles can be broadcast at the same time Choose the subtitle you want to display when watching these broadcasts 1 Press the A W buttons and choose Subtitle 2 Press the lt q P buttons and choose a subtitle that appears when the 6 SUB TITLE button is pressed Favourite Mode Enable disable the Edit PR List Favourites settings 1 Press the 4 W buttons and choose Favourite Mode 2 Press the lt q P buttons and choose ON or OFF On The Edit PR List Favourites settings are en abled When the PWY PA button is pressed only the channels chosen in the Edit PR List favourites those with the icon can be chosen e For details on how to set your favourite channels see Setting the favourite chan nels on page 24 21 Off The Edit PR List Favourites settings are dis abled When the PWY PA button is pressed all the channels registered in the Edit PR List can be chosen Parental Settings Some channels broadcast material which you do not want younger members of the family to watch Any channel can be locked so that it cannot be selected for viewing without first a four digit PIN code being entered In this way any channel not suitable for younger viewers can be protected This function enables or disables the menu protection system and allows the PIN code to be changed Channel And Menu Protection Lock feature Use up or
23. the tele vision to allow adequate ventilation This will prevent the TV from overheating and conse quential possible damage to the TV Dusty places should also be avoided Heat Damage Damage may occur if you leave the TV in di rect sunlight or near a heater Avoid places subject to extremely high temperatures or hu midity or locations where the temperature is likely to fall below 5 C 41 F LN TN Ww i y My MN Ly ayy S SE A S Ey VANS SS Ls tty W SS iii SS Mains Supply The mains supply required for this equipment is 100 240 AC 50 Hz Never connect to a DC supply or any other power source DO ensure that the TV is not standing on the mains lead DO NOT cut off the mains plug from this equip ment this incorporates a special Radio Inter ference Filter the removal of which will impair its performance Hot Moderate Climate Conditions This device is suitable for working in hot and moderate climate conditions gt IF INDOUBT PLEASE CONSULTA COMPETENT ELECTRICIAN DO DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections in cluding the mains plug extension leads and inter connections between pieces of equip ment are properly made and in accordance with the manufacturers instructions Switch off and wi
24. will switch to TV mode Fastext and Toptext Your TV supports the 7 page Teletext system When the page number of any of the 7 pages in memory is entered the system will not search for the requested page instead it will display the page automatically e Press PW button to move the Teletext screen forward one page at a time e Press PNY button to move the Teletext screen backward one page at a time For Fastext and Toptext The subject heading for the information may have a particular colour e Press an appropriate RED GREEN YELLOW or BLUE button in order to reach the relevant page quickly For TOPTEXT If Toptext transmission is present colour coded buttons will appear in status row If Toptext transmission is not present status row will not appear In Toptext mode the PW or PNY com mands will request the next or previous page respectively If Toptext transmission is not avail able in case of operation of these commands wraparound occurs For example page 100 appears to be one greater than page 199 Peripheral Equipment Connections There is a wide range of audio and video equip ment that can be connected to your TV Connection diagrams at the end of this section show you where the different equipment should be connected at the back side of the TV Via the Euroconnector Your TV set has 2 Euroconnector sockets If you want to connect peripherals e g video decoder etc
25. E GUIDE BACK PV IPA 15 number buttons during recording a message appears asking if you want to stop recording or not Press OK button to stop recording or BLUE button to continue recording Do not turn the TV off in the following cases e When recording images from an external device connected to TV For example camcorder e When recording a TV channel after it has been unscrambled on a decoder e When recording a TV channel by using the TV s output because the VCR s own tuner can not properly receive that channel e When recording Digital terrestrial broadcast ing DVB T TV autopower on VCR image view When the VCR starts playing the TV automati cally turns on and images from EXT 2 appear on the screen This function does not happen if your TV s main power is turned off Set your TV s main power to on StandBy Mode Basic Operations You can operate your TV using both the re mote control and TV buttons Operation with the buttons on the TV Volume Setting e Press af button to decrease volume or MA button to increase volume so a vol ume level scale slider will be displayed at the middle of the bottom on the screen Programme Selection e Press PA button to select the next pro gramme or PW button to select the previ ous programme Switching input mode e Pressing TV AV OK button will change the input mode Entering Main Menu e Press MENU bu
26. O O O O O e For 16 9 aspect ratio pictures that have been squeezed into a normal picture 4 3 aspect ratio use the FULL mode to restore the pic ture to its original shape REGULAR Use to view a normal picture 4 3 aspect ratio as this is its original shape PANORAMIC This stretches the left and right sides of a nor mal picture 4 3 aspect ratio to fill the screen without making the picture appear unnatural O O O O C O O O O The top and bottom of the picture are slightly cut off 14 9 ZOOM This zooms up the wide picture 14 9 aspect ratio to the upper and lower limits of the screen O O O O 16 9 ZOOM This zooms up the wide picture 16 9 aspect ratio to the full screen O O gt ono 16 9 ZOOM SUBTITLE This zooms up the wide picture 16 9 aspect ratio with subtitles to the full screen SUBTITLE Note SUBTITLE e For 14 9Z00m 16 9Z00m 16 9Z00m Sub title top and bottom of DTV menu and OSD will be cut off e To enjoy with recommended aspect ratio please set Zoom size to Auto PC Mode Installation e Power off both Computer and the TV before making any connections e Set your PC s resolution correctly before connecting to the TV See the table in page 41 for supported modes 33 e Use a D SUB cable to connect the TV s PC input to the computer s RGB output termi nal If you want to listen to the sound from the computer use an audio cable to conn
27. Press the A W buttons and choose the channel to be registered as a favourite channel and then press the OK button The favourite icon appears on the right side of the chosen channel When you leave the Channel List screen by pressing MENU the channel showing on the quarter screen is selected for normal viewing on the whole screen Installation Although your TV will not lose its settings or stored channels when switched off you may wish to re install the programs because you have moved to a different area with different broadcast frequencies you wish to reinstate a channel previously deleted from the chan nel list or you want to watch new channels which have started broadcasting Display the DTV Menu and using the A or Y buttons highlight the Installation line and press OK to display the Installation Menu The Installation menu appears You can either select Factory Settings effec tively resetting the receiver to its factory setting condition or just search for channels Installation Manual Search Factory Settings Automatic Search The receiver can search for channels auto matically searching all the broadcast frequen cies for free to air channels To perform Automatic search Select Automatic Search with the A or W buttons and press OK A warning message is displayed Start automatic search Current PR list will be replace
28. Sede Sonia een eea 29 Program Menu ccccceeceeeneeeeeeees 30 Source Meu cccecececaceececececeees 31 Other FOAtUIGS sniroasoiioir 32 MW SlatUS n ele A 32 Sound Indicator c cccceceececececeees 32 Hyper Sound ccccccceeeeeeeeeeeeeeeeeees 32 Mute Indicator ccccccccececeeeeeces 32 No Signal Detection TV mode 32 Volume Bab cccccccccececececececececess 32 EXT MOES oana 32 ZOOM Modes cecececececececececeueess 33 PG MOG soisi a 33 Installation c cece ecececececececececeaeees 33 Main Menu in PC mode 005 34 PC Picture Position Menu 34 PC Picture Menu ccccccceeeeeee eens 34 Sound Menu si hei deeh clsnancivcsencsatea tele 35 PIP PICWUIC unane 35 Source Menu cceccseeeceseaeeeeeaeeees 35 Sound in PC mode ccccse sees 35 Analogue Teletext cccceseeeeeeeeeeees 36 To operate Teletext eeee 36 To select a page of Teletext 36 To Select Index Page cceeeeeees 36 Searching for a teletext page while watching TV acu eek See tie 36 To Select Double Height Text 36 To Reveal concealed Information 36 To Stop Automatic Page Change 36 To Select a Subcode Page 36 To exit Teletext 2 0 0 0 cccceeceseeseeeeeeeees 37 Fastext and Toptext
29. VESA Compatible LT 20DA6SSP PAL SECAM BG DK I L Lp Digital 474 MHz 858 MHz Analogue 46 25 MHz 862 25 MHz Cable TV S1 S20 S21 S41 Video Analog 0 7 Vp p 75 ohm positive Sync TTL Level positive or negative Seperate sync 30 69 kHz 50 75 khz 78 75 MHz max 20 04 509 mm measured diagonally 443 61 mm horizontal x 249 41 mm vertical 1366 x 768 max WXGA Analogue 100 On Screen Display OSD 75 Ohm unbalanced Adaptor 100 240 V AC 50 Hz TV 24V DC 80 W max STAND BY lt 3W German Nicam Stereo 2X5 Ways 10 THD Euroconnector 21 pin SCART back of the cabinet e Video Input Audio L R Inputs and RGB inputs are available TV broadcast outputs Video and Audio L R are available Euroconnector 21 pin SCART back of the cabinet e Video Input S VIDEO Y C input Audio L R and RGB inputs are available e Video and Audio L R outputs are available e T V LINK functions are available RCA connectors x 5 back of the cabinet e Component video Pr Pb Y inputs and Audio L R inputs are available e 625p 50Hz and 525p 60Hz signals are available RCA connectors x 3 side of the cabinet S VIDEO connector x 1 side of the cabinet e Video input S VIDEO Y C input and Audio L R inputs are available RCA connectors x 3 e Audio L R output are available e Digital Audio Out Coaxial is available Analog RGB D SUB 15 x 1 e PC signal is available refer to page 41 for details
30. alling on the screen A floor and table top stand are available for this television or and angled bracket which enables the TV to be wall mounted The LCD display panels are manufactured using an extremely high level of precision technol ogy however sometimes some parts of the screen may be missing picture elements or have luminous spots This is not a sign of a malfunction Make sure the TV is located in a position where it cannot be pushed or hit by objects as pressure will break or damage the screen Distance Recommendation Install the TV on solid horizontal surface such as a table or desk For ventilation leave a space of at least 10 cm free all around the set To prevent any fault and unsafe situations please do not place any objects on top of the set Important Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and or damage to the product caused by e fire e earthquake e accidental damage e intentional misuse of the product e use of the product in improper conditions e oss and or damage caused to the product whilst in the possession of a third party e any damage or loss caused as a result of the owner s failure and or neglect to follow the instructions set out in the owner s manual e any loss or damage caused directly as a result
31. button or directly press OK button on Audio Out to enter the Audio Out menu Audio Out AOOO O O O p Volume Audio Out Volume e As you enter the Audio Out sound menu Volume will be the only option Press P button to increase volume e Press lt d button to decrease volume While you are connecting headphones when you change the Audio OutVolume lt q or P Volume setting is changed at the same time Selecting Sound Mode e Using A or W button select Sound Mode Press lt q or P button to change Sound Mode You can choose Mono Stereo or Dual l I mode only if the selected channel sup ports that mode In case of bilingual broadcast Dual Sound you can select original or dubbed language using mode option So when somebody lis tens to the original language from the loud speakers somebody else can listen to the dubbed language from headphone 28 To Store The Settings In the Sound Menu all settings are stored automatically Feature Menu Press MENU button now you are in mainmenu In the main menu select Feature using A or W button Then enter the Fea ture menu by pressing lt q P or OK but ton Feature EXT 2 Output From EXT 2 Output TV EXT 1 EXT 4 or DIGI TAL can be given These modes can be cho sen by pressing lt q or P button on EXT 2 OUTPUT Feature
32. ction are not effective when there is menu on the screen Ifthe menu is removed the effect of this function is seen At normal broadcasting Noise Reduction changings are effec tive at once Note 2 At moving pictures while Noise Reduction is at maximum level some picture distortions may occur If Noise Reduc tion is set to medium or minimum the picture will improve Setting Hue During Playback NTSC system this will ap pear in AV mode only when NTSC video source is applied Otherwise HUE option is invisible in Picture menu in TV mode e Using A or W button select Hue e Press P button to increase hue level e Press lt q button to decrease hue level Center value is indicated with one arrow Reset Press BLUE button to reset the picture modes to factory default settings To Store the Settings In the Picture Menu all settings are stored automatically Te Sound Menu As you enter the main menu sound will be the second item In the main menu select Sound using A or W button then enter the sound menu by pressing lt q P or OK button Setting Volume As you enter the sound menu Volume will be the first selected option Press P button to increase volume e Press lt q button to decrease volume Or you can directly change the volume set tings using l to increase or al to decrease button Sound _ s _
33. d 15 o This starts the automatic tuning process and searches through all the available broadcast frequencies for free to air channels Installation gt Automatic Search UHF 51 Please wait a few minutes ss Cancel go to DTV Cancel go to Installation menu Previous channels will be replaced on auto matic search If no digital terrestrial television broadcasts are found the TV will display a message No programme found Please check antenna signal 24 When OK button is pressed following mes sage will appear on the right bottom side of the screen PR List Empty Manual Search This is for searching for digital channels on a single broadcast frequency The frequency channel number 21 68 is entered in the box at the top left of the screen and the received signal level and signal quality can be observed on the two bar graphs at the bottom When OK is pressed the TV searches that frequency and display a list of the channels found Installation gt Manual Search Channel Number 68 Signal Level Signal Quality Move cursor I Start More Hint The bar graphs of signal quality and signal level give a good indication of whether any channels are likely to be found If only the signal level graph shows a high value then it is likely that an analogue channel occupies that broadcast frequency If the signal qual it
34. d press the OK button 2 Input the current PIN code When you are making this setting for the first time input OOOO When a PIN code has already been set enter the correct PIN code The PIN code setting window appears 3 Press the number buttons to input a new PIN code password 4 Input the new PIN code password again in the Confirm box Pin code is changed appears Your newly chosen PIN code is now set You will now need to use the PIN code password you choose Here to lock or to unlock the Edit PR List s Lock Edit PR List Choose Edit PR List and press the OK but ton EDIT PR LIST appears 290 EDIT PRLIST Delete Edit Name 23 Bid up ty Edit Number Lock Favourites select Function Select PR WatchPR More The Edit PR List can be used to do the follow ing e delete registered channels edit channel names e lock channels so that they can not be watched by children e set Favourites so that you can easily choose from only the channels you often watch e Sometimes you may notice a drop in picture quality while watching your programme in the quarter screen This is not a fault e When the BACK button is pressed the previ ous screen is returned to When the TV DTV or MENU button is pressed the menu dis appears e When the O information button is pressed the help screen appears When it is pressed again the previous screen is re turned to
35. dio and video cables NTSC Playback Connect a NTSC video recorder to a terminal Then press AV button to select the corre sponding AV mode NTSC 3 58 4 43 system is detected automati cally in AV mode Camera and Camcorder To connect to the EXT 4 terminal Connect your camera or camcorder at the back side of your TV e Connect your equipment to the TV via VIDEO yellow AUDIO R red and AUDIO L white inputs You should connect the jacks to the input in the same colour Connect the decoder to the video recorder Some video recorders have a special euro connector for decoder e Connect a eurocable to the euroconnector of your decoder and to the special eurocon nector of your video recorder See also the handbook of your video recorder e To connect your video recorder to the TV see TV and Video Recorder section If you want to connect more equipment to your TV consult your dealer Connecting Headphones Use the stereo headphone socket on the right side of your TV to connect headphones Connecting the PC Connect PC monitor with 15 pin PC cable to the 15 pin connector on the rear of the com puter For detail installation procedure see In stallation in PC mode To connect to S Video input Connect your camera or camcorder at the back side of your TV e Connect your equipment to the TV via S Video input at the back side by using S Video cables _ 38 0
36. down buttons to highlight Parental Settings Press OK button to enter Parental Settings Menu A box asking for the lock key is displayed Enter PIN code There is only one key which is set to 0000 initially Enter lock key If wrong Lock key is en tered the following message is displayed on the screen and it is returned back Wrong PIN code If it is correct the Parental Settings Menu in cluding following items is displayed Age 7 Installation Use or buttons to highlight the menu item that will be adjusted Maturity Lock Use or buttons to set Maturity Lock to the Off Age7 Age13 Age18 and classified X Menu Lock There you can set reset locking for the Main Menu or the Installation Menu to restrict ac cess If the menu lock is disabled there will be free access to the menu system Disable All menus are unlocked Main Menu Main menu is accessible only with the correct lock key Installation Installation menu is locked so the user cannot add channels Changes will be updated after exiting Con figuration Menu Enter PIN code Also in this menu you can change the pin code and set change parental lock mode Choose Enter PIN code to change the PIN code for the Edit PR List menu s Lock The PIN code factory setting how it is set when you purchase the television is OOOO 1 Press the A Ww buttons and choose Enter PIN code an
37. e lt q P buttons to move the cursor and edit the name and then press the OK button The edited channel appears in the Edit PR List Locking a channel When there is a channel you do not want your children to watch you can lock the channel 1 Press the lt q P buttons and choose Lock on the bar at the bottom of the screen 2 Press the A W buttons and choose the channel to be locked and then press the OK button The Enter PIN code input window appears 3 Press the number buttons to input to cor rect PIN code 23 If you have not changed the PIN code in the CONFIGURATION menu s Enter PIN Code see page 22 input the PIN code you chose The lock icon appears next to the channel name in the Edit PR List When a locked channel is chosen the En ter PIN code input window will appear If the correct PIN code is input the picture ap pears e When you forget the PIN code for the Lock you can unlock locked channels by perform ing Automatic Search see INSTALLATION Setting the favourite channels If only channels that you often watch are set as favourite channels you can choose from just those channels by pressing PV PAN e After setting the favourite channels check the Favourite Mode in Configuration see page 21 is set to ON 1 Press the lt q P buttons and choose Favourites on the bar at the bottom of the screen 2
38. ear If you do not need to do T V LINK select Can cel and press P or OK button to exit the menu Program Menu Press MENU button now you are in main menu In the main menu select Program using A or W button Then enter the Programme menu by pressing lt q P or OK button Note There is no Program menu in any EXT modes Program P01 BAG i T V Link Program Menu is used to delete a channel to change the programme number of a channel to give a channel name to a channel and to start the A P S Autostore function 30 To choose a channel in the PROGRAM menu Press A W lt P button The programme number that you choose is high lighted in the Program Caution Using Delete or Insert function rewrite the current chan nel listin the Program menu Therefore the programme num bers of some of channels will change When you complete the settings of Program menu If you have a T V LINK compatible VCR press i button to display the T V LINK menu then follow the operating procedure Downloading the data to VCR T V Link DOWNLOAD TV gt VCR gt Continue Cancel If you do not have a T V LINK compatible VCR select Cancel and press P or OK button to exit the menu To give a channel name Name 1 Choose the channel you want to give a chan nel name 2 Press the RED butt
39. ect the PC AUDIO IN to the computer s sound output terminal 15 Pin Mini D Sub Connector 10 5 b 15 11 e Tighten the screws of the Display cable until the connectors are fastened securely fin ger tighten only Main Menu in PC mode Enter the main menu by pressing the MENU button on the remote control PC Menu gt PC Picture Position PC Picture Sound PIP Picture Source 800 x 600 H 38 kHz V 60 Hz PC Picture Position Menu In the Main menu select PC Picture Posi tion using A or W button then enter the menu by pressing lt P or OK buttons gt Auto Position Hori Position lt q a Dot Clock O O OU Clock Phase HEE T Oooo Ef Auto Position Ver Position If you shift the picture horizontally or vertically to an unwanted position use this item to put the picture into correct place automatically e Select Auto position item by using A or W buttons e Press OK button e Press MENU button or BACK button to store the value Warning Auto position adjustment recom mended to be done with the full screen image for the proper adjustment Horizontal Position This item shifts the image horizontally to right hand side or left hand side of the screen e Select Hor Position item by using A or Y button Use lt M or P button to adjust the value e Press MENU
40. ed auto matically Install Menu Press MENU button now you are in main menu In the main menu select Install us ing A or W button Then enter the Install menu by pressing lt q P or OK button Install gt Programme Band Channel Colour System P02 Cc 02 Auto Sound System BG Fine Tuning 4p 4 Search 048 25 Decoder EXT 2 Off VCR Off Store In EXT mode Install menu appears like this Install gt Colour System Auto VCR Off You can change only Colour system and VCR Selecting Programme e Using A or W button select Program me e To select programme number you can use lt q P button or Digit Buttons 29 Selecting Band Band can be chosen either e a or Ss by gq or gt button Selecting Channel Channel can be changed by lt q or P button or by Digit Buttons Selecting Colour System Using lt q or P button on Colour System you can change the colour system to PAL SECAM or Auto Note In EXT mode you can choose NTSC 3 58 and NTSC 4 43 as well Selecting Sound System Using lt q or P button on Sound System you can change the standard to BG DK I L Lp Selecting Fine Tuning You can use the Fine Tuning process for fine adjustment after coarse adjustment if you are not happy about the image on the screen Use lt q or P bu
41. eletext and and its functions are iden tical to the analogue text system Please do refer to the Analogue teletext explanations DTV Menus The DTV menu can only be shown when watching Digital terrestrial broadcasting To display the DTV menu do the following 1 Press MENU button The menu appears Sound Feature DIGITAL Source 2 Choose DIGITAL and press the OK button The DTV menu appears 18 DTV Timers Configuration Edit PR List Installation Common Interface Timers DTV Timer Recording By setting the timer you can record a Digital terrestrial broadcasting DVB T programme with a VCR connected to EXT 2 while you are out e Before using DTV timer recording the VCR and TV must be connected correctly For details see T V LINK on page 15 e When you have a T V LINK compatible VCR connected to Ext 2 all you need to do is set the TV timer settings and the programme will be recorded By using Direct Rec of the T V LINK func tion the Direct Rec commands are sent from the TV to the VCR to automatically start and end the recording It is not necessary to set the timer on the VCR e When your VCR is not T V LINK compatible you also need to set the VCR timer settings to match the TV timer settings e The recording may not start and stop at ex actly the right times for some programmes It is recommended that you allow some lee
42. g an aerial VCR and mains Please read the user manual of each device before connecting to ensure a correct setup It is necessary to connect aerial to watch TV Please see Peripheral Equipment Connections on page 37 for connections to other devices Connect the aerial AERIAL i A s NN A to DC IN Connect a video device AERIAL EXT 2 EXT 1 AC adapter IMPORTANT e Only use the adaptor supplied with this TV e The TV set is designed to operate on 24 V DC For this an adaptor is used which gives 24 V DC voltage Connect this adaptor to a system that supplies 100 240 V AC 50 Hz Step 5 Using the cable holder A cable holder which is used to keep the connection cables tidy is supplied Attach the cable holder to the hole on the back of the stand then gather together the connection cables and put them inside the holder cobie booker s43 Step 6 Switching the TV ON OFF To switch the TV on Your TV will switch on by two steps 1 Connect the power supply cord to the sys tem Then the TV switches itself to stand by mode and the power lamp becomes red located on the front of the TV 2 To switch on the TV from stand by mode either Press the P button on the remote control or on the right side of the TV or press a digit button on the remote control so that a programme number is selected or
43. have an Eurocon nector or RCA jacks connect it to the TV with an aerial cable For details see the manual provided with the equipment e To store the test signal that comes from the equipment see Install Menu on page 29 and store it to the program number 0 You can watch images from that equipment to select the program number which you stored the test signal Decoder Cable TV offers you a wide choice of prog rammes Most of them are free others are to be paid for by the viewer This means that you will need to subscribe to the broadcasting organisation whose programmes you wish to receive This organisation will supply you a corresponding decoder unit to allow the prog rammes to be unscrambled For further information ask your dealer See also the booklet supplied with your decoder Connect a decoder with an aerial socket to the TV e Connect the aerial cable Connect a decoder without an aerial socket to the TV e Connect the decoder to your TV with a eurocable RCA Jack Cable to EXTERNAL RCA Jack When your decoder has a Euroconnector RCA Jack you can obtain better picture quality if you connect a eurocable RCA Jack Cable to EXTERNAL RCA Jack TV and Video Recorder VCR e Connect the Video Recorder to the ANT an tenna input socket of the TV with the aerial cable e Connect the Video Recorder to the EXT 1 or EXT 2 terminal with the SCART cable or connect it to the EXT 4 terminal with the au
44. in between EXT Modes By pressing the AV button you can switch your TV to EXT modes except being in Tele text Pressing this button consecutively will switch the TV in one of the optional EXT modes EXT 1 EXT 2 EXT 2 S EXT 3 EXT 4 EXT 4 S PC and DIGITAL TV In order to quit the EXT mode press any digit buttons or PN or PAA 39 Zoom Modes Zoom mode can be changed by pressing ZOOM button You can change the screen size according to the picture aspect ratio Select the optimum one from the following ZOOM modes AUTO When a WSS Wide Screen Signalling sig nal which shows the aspect ratio of the pic ture is included in the broadcast signal or the signal from an external device the TV auto matically changes the ZOOM mode to 16 9 ZOOM mode PANORAMIC or FULL mode ac cording to the WSS signal e When the AUTO mode does not function cor rectly due to poor WSS signal quality or when you want to change the ZOOM mode change to another ZOOM mode manually Using the different screen formats Press the ZOOM button to select the different modes Auto Full Regular Panoramic 14 9 Zoom 16 9 Zoom 16 9 Zoom Subtitle modes In some modes press 4 or W button to move the picture up or down Note You can only choose REGULAR and FULL in PC mode FULL This uniformly stretches the left and right sides of a normal picture 4 3 aspect ratio to fill the wide TV screen O O O O Q
45. it programmes Hint The channel list numbers are assigned by the broad casters Because not all channels are broadcast free to air and stored by the receiver the channel list numbers do not run continuously The fifteenth channel in the list for ex ample may not be channel number 15 but channel number 17 Hint If you enter a number which does not correspond to a stored channel the next valid channel number is selected instead If you enter a number greater than the highest numbered channel in the channel list the IDTV will select the last channel in the list 16 Operating while watching IDTV Pressing the TV DTV button at any time while watching television programmes will switch the TV set between displaying the digital ter restrial television broadcasting and its nor mal analogue broadcasting It is also used to switch to the last watched mode TV or DIGITAL TV from the EXT mode For example if a DVD player is connected with a SCART cable and powered on then the IDTV will automatically switch to EXT mode The IDTV will switch to the last watched mode TV or DIGITAL TV if DVD player is switched off or TV DTV button is pressed EVERYDAY OPERATION While using the IDTV to the full there are great many buttons to use in different situations Many of the menu screens displayed by the IDTV have reminders as to which button do what at the base of the screen In addition many screens have further help avai
46. ith games consoles may not work on this product Warning This is a Class A product In a domestic envi ronment this product may cause radio inter ference in which case the user may be re quired to take adequate measures WARNING e Fingers may be trapped under the TV causing injuries Hold the TV at the bottom in the middle and do not al low it to tilt up or down e The TV may fall causing injuries Hold the bottom of the stand with your hand and tilt the TV up and down e Do not allow children to hang from the TV place their elbows on the TV or lean against the TV Doing so may cause the TV to fall over and lead to injuries CAUTION e To avoid electric shock or damage to the unit first firmly insert the small end of the power cord into the AC Adapter unit it is no longer wobbly and then plug the larger end of power cord into an AC outlet Where to install WARNING e When you install the TV on the wall only use a JVC wall mounting unit which is designed for this TV e Make sure the TV is installed on the wall by a skilled installer Locate the TV away from direct sunlight and strong lights soft indirect lighting is recommended for comfortable viewing Place on a sturdy platform the mounting surface should be flat and steady it should then be secured to the wall with a sturdy tie using the hook on the back of the TV this will prevent it from falling over Use curtains or blinds to prevent direct sunlight f
47. lable which is displayed when the button is pressed as prompted at the bottom right of the screen INFORMATION BANNER Whenever you change channel using the PWV PA buttons or the number buttons an information banner is displayed at the bot tom of the screen This will remain on the screen for approximately three seconds The information banner can also be displayed at any time while watching TV by pressing the O button on the remote control Pressing the button again removes the banner GU bc THREE at 17 88 Wee 12900 1855 This H BBC THREE Meat 10555 19900 Welren To BAL Hint Not all channels broadcast the programme data If the name and times of the programme is not available then No Information is displayed in the information banner The information banner gives a number of facts on the channel selected and the programmes on it The name of the channel is displayed along with its channel list number and an in dication of the strength of the signal received on this tuning channel The name and the start and finish time of the programme currently showing on the selected channel are given and the current time Icons are also displayed in the information banner and if this channel is a favourite chan nel favorite channel icon If the selected channel is locked you must enter the correct four digit code to view the channel Enter PIH code ELECTRONIC PROGRAMME GUIDE EPG
48. n page to be displayed in double height text Press 4 button again for the bottom half of the information page to be displayed in double height text Press 4 button once more for the full page of normal height text To Reveal concealed Information Pressing 2 button once will reveal an swers on a quiz or games page Pressing button again will conceal the revealed answers To Stop Automatic Page Change The teletext page you have selected may con tain more information than what is on the screen the rest of the information will be dis played after a period of time Press button to stop the automatic page change Press button again to allow the next page to be displayed To Select a Subcode Page Subcode pages are subsections of long Tele text pages that can only be displayed on the screen one section at a time e Select the required Teletext page Press button _ 36 e Select the required subcode page number by pressing four digit buttons e g 0001 e If the selected subcode page is not displayed in a short time press X button TV programme will be displayed on the screen e Teletext page number will be displayed on the upper left corner of the screen when the selected page is found Press X button to display the selected Teletext page To exit Teletext Press button The screen
49. ness or colour control is not available but volume control is available in text mode To operate Teletext e Select a TV station on which Teletext is being transmitted e Press TELETEXT button Usually the list of contents index is displayed on the screen a 2 e TV RADIO GUIDE To select a page of Teletext e Press the appropriate digit buttons for the required Teletext page number The selected page number is displayed at the top left corner of the screen The Teletext page counter searches until the selected page number is located so that the desired page is displayed on the screen e Press PW button to move the Teletext screen forward one page at a time e Press PNY button to move the Teletext screen backward one page at a time To Select Index Page e To select the page number of the index gen erally page 100 press ED button Searching for a teletext page while watching TV In the Teletext mode pressing X button will switch the screen to the TV mode In the TV mode enter a page number using digit buttons As you enter last digit of page num ber sign will replace the page number and flash until the entered page number is found Then the page number will replace sign again Now you can display this teletext page pressing X button To Select Double Height Text Press button for the top half of the in formatio
50. nu Press MENU button to return to normal screen or press BACK button to return to the previous menu No solution If the TV suddenly stops responding discon nect the power cord of the TV from the AC out let Connect themto the AC outlet again to turn on the TV If the TV returns to a normal state it is not a failure If this does not work switch off remove the mains plug and call the service personnel never attempt to repair it yourself Bad picture in digital mode Although this TV can receive both Digital ter restrial broadcasting DVB T and Analogue terrestrial broadcasting you may not be able to receive DVB T depending on the area in which you live If the picture freezes a lot or block effect is seen frequently on screen probably there is a problem with your reception Please contact customer services of your ser vice provider if you are a subscriber 42 Specifications Item Model Broadcasting Systems Channels and Frequencies Input Signal Horizontal Timing Vertical Timing Dot Rate Panel Size Visible Picture Size Display Resolution Number of Preset Channels Channel Indicator RF Aerial Output Power Requirements Power Consumption W Sound Systems Audio Output EXT 1 Terminal EXT 2 Terminal EXT 3 Terminal EXT 4 Terminal AUDIO OUT Terminal PC IN terminal PC AUDIO IN terminal Card Slot Dimensions W x H x D Weight Accessories Headphone jack Wall Mount
51. ocated in the terminal cover at the left hand side of the TV from front view e The CAM should be correctly inserted it is impossible to insert fully if reversed The CAM or the TV terminal may be damaged if the CAM is forcefully inserted 3 Connect the TV to the mains supply switch on and then wait for few moments until the card is activated e Some CAMs may require the following set up Please set the CAM by entering the DTV menu Common Interface then pressing OK button CAM set up menu is not displayed when it is not required e To see the viewing contract information press MENU Select DIGITAL and Press OK then Select Common Interface and press OK 25 e When no module is inserted No CI Mod ule appears e Refer to the module instruction manual for details of the settings Setting The TV Menu System Your TV s analogue part has been designed with a menu system to provide an easy ma nipulation of a multi function system The TV is controlled by choosing the commands which are displayed on the screen MAIN MENU Press the MENU button The main menu will be displayed in the middle of the screen b Picture Sound Feature Install Program Source To select a sub menu use A or W but ton and press lt q or P button or directly press OK button In EXT 1 EXT 2 and EXT 4 modes main menu appears the same as in TV mode but without Prog
52. of misuse or malfunction of the product when used simultaneously with associated equipment Furthermore under no circumstances shall JVC be liable for any consequential loss and or damage including but not limited to the following loss of profit interruption of business the loss of recorded data whether caused during normal operation or misuse of the product WARNING NEVER LEAVE A STATIONARY IMAGE ON THE SCREEN lf stationary images generated by TELETEXT CHANNEL IDENTIFICATION LOGOS COM PUTER DISPLAYS VIDEO GAMES ON SCREEN MENUS etc are left on the TV screen for any length of time they could be come permanently ingrained If you use your television to display completely still images or moving pictures which have a permanent still image superimposed e g broadcast network logos it is always advis able to reduce BOTH the brightness and con trast settings Care and disposal Cleaning the screen and cabinet Turn off the power clean the screen and cabi net with a soft dry cloth We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage Disposal When the set reaches the end of its useful life please dispose of it in accordance with Local Government Regulations or at a recy cling centre Control Panel Buttons POWER LAMP INFRARED RECEIVER SPEAKER TV AV OK MENU V PROGRAM A VOLUME STAND BY FOOT
53. on to enter the Name mode 3 Press lt q or P button to choose the position and press A or W button to choose each character of channel name 4 Press the RED button to store the channel name e To cancel the Name mode press the BLUE button To delete a channel Delete 1 Choose the channel you want to delete 2 Press the YELLOW button to enter the De lete mode 3 Press the YELLOW button to delete it e To cancel the Delete mode press the BLUE button To change the programme number of a channel Insert 1 Choose the channel you want to change the programme number 2 Press the GREEN button to enter the Insert mode 3 Press a amp W lt q P button to choose new programme number 4 Press the GREEN button to Insert the chan nel to the chosen programme number Autostore To enter Autostore menu press the BLUE but ton To learn the features of this function see Autostore below Autostore searches and stores all channels automatically on your TV according to the transmission of programme systems in your area Warning All Prestored Programmes Will Be Deleted Country Ok First of all choose the Country by using lt q or P button Then press the Red button to start Autostore Cancel After Autostore is finalized a programme list will appear on the screen In the program list you will see the
54. oo close to the loudspeakers non earthed audio equip ment or neon lights etc Mountains or high buildings can cause double pictures or ghost images Sometimes you can improve the picture quality by changing the direction of the aerial Is the picture or Teletext unrecognisable Check if you have entered the correct frequency The picture quality may degrade when two peripherals are connected to the TV at the same time In such a case disconnect one of the peripherals No Image on Display Screen Is the aerial connected properly Are the plugs connected tightly to the aerial socket Is the aerial cable damaged Are suitable plugs used to connect the aerial If you are in doubt consult your dealer No Image means that your TV is not receiving any transmission Have you pressed the cor rect buttons on the remote control Try once more PC Picture If no PC picture appears check that the D SUB cable is connected properly Check that your PC s resolution set correctly See pages 41 for supported modes Sound You can not hear any sound Did you perhaps interrupt the sound pressing W button Are external speakers connected to the TV Sound is coming from only one of the speak ers Is the balance set to one direction ex treme See Sound menu Remote Control If your TV no longer responds to the remote control perhaps the batteries are exhausted Replace the batteries Have you selected the wrong me
55. or Ww buttons to choose the programme you want to watch 4 Press the OK button The reminder icon will be displayed on the right side of the chosen programme name and the setting is completed When the TV is being watched it automati cally changes to the channel of the reminded programme when the start time of the sched uled programme is reached e This function does not work when the TV is turned off To cancel the reminder setting Display the EPG screen choose a programme which has the reminder icon and press the OK button Note e Reminder events are ignored if any timer event is active at that time e You can not set the reminder for the programme which has already started e No Information is displayed for the programme or channel which does not have any information You can not set the reminder for these programmes DISPLAYING THE SUBTITLES With Digital terrestrial broadcasting DVB T some programmes are broadcast with sub titles Subtitles can be displayed when watch ing these programmes Press the SUBTITLE button when watching Digital terrestrial broadcasting DVB T Subtitle ON appears at the top left of the screen and if programme has subtitles the subtitles are displayed When the SUBTITLE button is pressed again Subtitle OFF appears and the sub titles disappear Subtitle ON Subtitle OFF DIGITAL TELETEXT Use of t
56. ple DON T continue to operate the equipment if you are in any doubt about it working normally or it is damaged in any way switch off with draw the mains plug and consult your dealer DON T put the empty batteries into garbage instead of recycle bin to reduce harmfull ef fects to the environment ABOVE ALL NEVER let anyone especially children push anything into holes slots or any other openings in the case this could result in a fatal electric shock NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry To fully disconnect the TV switch off the mains socket and remove the Power plug Safety Precautions for Power adapter e Be careful May become hot e For indoor and dry location use only e Risk of electric shock e Shock hazard do not open e Keep all power adapters away from any other heat source e Always use power adapter s well ventilated area Cold cathode fluoresant lamp in LCD PANEL contains a small amount of mer cury please follow local ordinates or regula tions for disposal The LCD panel is very high technology prod uct with about a million thin film transistors giving you fine picture details Occasionally a few non active pixels may appear on the screen as a fixed point of blue green or red Please note that this does not affect the per formance of your product Please note that certain light guns used w
57. programme numbers and names assigned to the programmes If you do not accept the locations and or the programme names of programmes you can change them in Programme menu Source Menu You can switch your TV to EXT modes by pressing directly to AV button or by selecting in source menu from the main menu While in EXT mode you can also switch your TV to TV or other EXT modes by selecting in source menu from the main menu In main menu firstly use A or W button then use lt q P or OK button to enter Source menu In source menu move the cur sor by A or W button and then press OK button or lt q P buttons when the cursor is on the required item The selected mode comes automatically on the screen 34 Source DIGITAL Other Features TV Status Programme Number Programme Name or EXT they are displayed on the upper left of the screen The sound indicator is displayed with them too They are displayed after programme change for 3 seconds Sound Indicator The alternatives of the indicator are Mono Ste reo Dual and Dual II This indicator is dis played under the programme number indica tor on the screen In Mono broadcast or in forced mono for ste reo broadcast In Stereo broadcast If dual broadcast detected Dual is selected in default and also can be selected after Dual Il by Remote Control If Dual Il selected by Remo
58. ram sub menu In EXT 3 mode Main Menu appears as fol lows gt Picture Sound Feature Install Source In DIGITAL TV mode DIGITAL will appear on the Main menu Install and Program do not appear Menu does not disappear automatically if it is left on the screen Press MENU button again to remove menu Picture Menu Press MENU button now you are in main menu In the Main menu select Picture us ing A or W button then enter the Picture menu by pressing lt q P or OK button Setting Mode e As you enter the picture menu Mode will be the first item By pressing lt q or P button you may choose one of these options Soft Standard and Bright Picture Bright nay la lt 4 Bright 2 on Colour Temp Cool Noise Red Off RESET Mode Contrast Bright 1 Sharpness Colour Setting Contrast e Using A or W button select Contrast e Press P button to increase contrast level e Press lt q button to decrease contrast level Picture Bright ns nn zs a mE Cool Bright 1 Sharpness Colour Bright 2 Colour Temp Noise Red Off RESET Setting Bright 1 e Using A or W button select Bright 1 Press P button to increase brightness e Press lt q button to decrease brightness 26 Picture Mode Contrast gt Bright 1 Sharpne
59. ss Colour Bright 2 Colour Temp Cool Noise Red Off A RESET Bright a a Setting Sharpness e Using A or W button select Sharpness Press P button to increase sharpness level e Press q button to decrease sharpness level Picture Mode Contrast Bright 1 Sharpness Colour Bright 2 Colour Temp 07o To Noise Red Off Setting Colour e Using A or W button select Colour Press P button to increase colour level e Press lt q button to decrease colour level Picture Mode Contrast Bright 1 Sharpness b Colour Bright 2 Colour Temp Noise Red Off RESET Cool Setting Bright 2 e Using A or W button select Bright 2 Press P button to increase the back light e Press lt q button to decrease the back light Picture Bright a a a Colour an gt Bright 2 ST Colour Temp Cool Noise Red Off I RESET Mode Contrast Bright 1 Sharpness Setting Colour Temp e Using A or W button select Colour Temp e Press lt q or P button to select Warm Cool or Normal Setting Noise Reduction e Using A or W button select Noise Re duction e Press lt q or P button to select Noise Re duction level Off or Minimum or Me dium or Maximum Note 1 At low signal level the changings on the Noise Reduction fun
60. te Control Hyper Sound By selecting Hyper Sound in sound menu or by pressing the button on your remote control Pseudo Spatial effect can be turned on or off In Mono transmission the left and right channels will be added at left channel and dummy stereo effect will introduced to end user In stereo transmission it yields a phase differ ence between left and right channels Mute Indicator It is placed in the upper middle of the screen when enabled and it stays there until it is dis abled To cancel mute there are two alternatives the first one is by pressing the W button this volume is set to the preceding value and the second one is increasing or decreasing the volume level No Signal Detection TV mode If no valid signal detected it takes 5 minutes to switch to the Stand By mode unless any signal detected or any Remote Control com mand is accessed After a Remote Control command if No Sig nal Timer is active the timer stops and if no signal detected again the timer is initialized to 5 minutes and starts 3 seconds later again to count down It is not valid in EXT modes Volume Bar Itis displayed in the lower middle of the screen When a volume command is received press ing a or ml by Remote Control or Control panel at the top of the TV and no menu is active it stays on the screen for 3 seconds after the last volume command or until an other command is received
61. thdraw the mains plug be fore making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels or doors on equipment DO NOT DON T remove any fixed cover as this may expose dangerous voltages DON T obstruct the ventilation openings of the equipment with items such as newspapers table cloths curtains etc Overheating will cause damage and shorten the life of the equipment DON T allow electrical equipment to be ex posed to dripping or splashing or objects filled with liquids such as vases to be placed on the equipment DON T place hot objects or naked flame sources such as lighted candles or night lights on or close to the equipment High tem peratures can melt plastic and lead to fires DON T use makeshift stands and NEVER fix legs with wood screws To ensure complete safety always fit the manufacturer s approved stand or legs with the fixings provided accord ing to the instructions DON T listen to headphones at high volume as such use can permanently damage your hearing DON T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode Switch off using the switch on the equipment and make sure your family know how to do this Special arrange ments may need to be made for infirm or handicapped peo
62. tton on Fine Tuning item until getting the best image on the screen Selecting Search To start the search process press gt button for forward search or lt q button for backward search If a signal is found or reaches to end of the band after searching press lt q or P buttons to continue search process To stop the search process when you want press d or P buttons at any time Decoder EXT 2 You can use this mode to connect any de coder to your TV e Press the lt q or P buttons to set it On or Off When you select Decoder EXT 2 On EXT 2 output will be chosen as TV mode only and any scrambled channels will be unscrambled through decoder connected your TV via EXT 2 output Setting VCR Video Cassette Recorder Mode e This item can be seen in TV EXT 1 EXT 2 EXT 2S EXT 3 EXT 4 and EXT 4S modes e If you want to watch a VCR source from one of these modes then it will be better to set VCR mode On For this while the cursor is on this item press the lt q or P buttons to set it On e If you want to watch a DVD then you must set this item off because DVD is not a source like a VCR and to see the picture better you must set the VCR mode Off To Store Settings Press lt q P or OK button on Store op tion to store Install menu settings e After stored T V LINK menu will app
63. tton to enter Main menu In the Main menu select submenu using P or PA button and enter the sub menu using A or TV AV OK or MENU button To learn the usage of the menus refer to the Menu System sections Operation with Remote Control The remote control of your TV is designed to control all the functions of the model you se lected The functions will be described in ac cordance with the menu system of your TV Functions of the menu system are described in following sections Volume Setting Press A button to increase volume Press al button to decrease volume A volume level scale slider will be displayed in the middle at the bottom of the screen Programme Selection Previous or next programme e Press PW button to select the previous programme e Press PA button to select the next programme Programme Selection direct access Press digit buttons on the remote control to select programmes between 0 and 9 TV will switch to the selected programme To select programmes between 10 99 press the digit buttons consecutively which programme you want to select eg for programme 27 first press 2 and then 7 When it is late to press second digit button only the first digit programme will be displayed The limit of the delay time is 3 seconds Example PR6 press 6 PR12 press 1 and 2 Press directly the programme number to reselect single dig
64. udio language e When the BACK button is pressed the previ ous screen is returned to When MENU but ton is pressed the menu disappears e When the Information button is pressed the help screen appears When it is pressed again the previous screen is re turned to MENU When the Configuration menu is entered MENU is highlighted Use left or right buttons to change language between English or Span ish MENU Language determines the on screen menu language Audio Language With Digital terrestrial broadcasting DVB T a number of languages can be broadcast at the same time Choose language you want to listen when watching these broadcasts 1 Press the A W buttons and choose Audio Language 2 Press the lt q P buttons and choose the language Language changes every time the button is pressed e If the selected language is not broadcast the default language will be played e You can change the Audio language directly by pressing I Il button Dolby Digital By pressing lt q P button select Dolby Digi tal Dolby Digital can be set to On or Off After press lt q P button the following mes sage appears on the screen Dolby diigital audio can only be listened to using a home entertainment system Dolby and the double D symbol are trade marks of Dolby Laboratories Subtitle With Digital terrestrial broadcasting DVB T a number of
65. ur television and PC monitor e 100 programmes from VHF UHF bands or cable channels can be preset e It can tune cable channels e Controlling the TV is very easy by its menu driven system e It has 2 pieces of Euroconnector socket for external devices such as video video games au dio set etc e S Video and AV inputs are available e Optional stereo sound systems German or German Nicam are available e Multilanguage OSD e Teletext FLOF Fastext TOP WST World Standard System e It is possible to connect headphone e A P S Automatic programming system e PLL Frequency Search e All programmes can be named e Forward or backward automatic tuning e Sleep timer e Child lock e Auto Full Regular Panoramic 14 9 Zoom 16 9 Zoom 16 9 Zoom Subtitle modes e Automatic sound mute when no transmission e When no valid signal is detected after 5 minutes the TV switches itself automatically to stand by mode e NTSC Playback e TV Picture in PC if PC input available e PC input Support Up to 1360 x 768 e Plug amp Play for Windows 9X ME 2000 XP e PC Audio input 10 Getting Started Follow Step 1 to 7 to set up your TV Step 1 Checking the accessories supplied e Remote control unit x 1 e AA RG battery x 2 e AC adapter x 1 e Power cord x 1 Step 2 Inserting batteries e Remove the battery cover located on the back of the remote control by gently pulling upwards from the indicated part
66. way when setting the recording times e Provided that the days and times are not the same you can set up to ten timer settings e When subtitles are ON the subtitles dis played with the broadcast will be recorded When you do not want to record the sub titles you need to turn OFF the subtitles set tings beforehand See Displaying the sub titles on Page18 e During DTV timer recording you are unable to view the DTV menu 1 Choose Timers and press the OK button The TIMER MENU appears Timer Menu 00 03 21 11 2006 Name Start End Date Mode BBC ONE 00 00 00 00 01 01 2006 Inactive BBC ONE 00 00 00 00 01 01 2006 Inactive BBC ONE 00 09 00 00 01 01 2006 Inactive 5 BBC ONE 00 09 00 00 01 01 2006 Inactive 6 BBC ONE 00 00 00 00 01 01 2006 Inactive y BBC ONE 00 00 00 00 01 01 2006 8 BBC ONE 00 00 00 00 01 01 2006 Inactive 9 BBC ONE 00 00 00 00 01 01 2006 Inactive 10 BBC ONE 00 00 00 00 01 01 2006 Inactive Inactive Change Mode Edit timer settings e When the BACK button is pressed the previ ous screen is returned to 2 Press A W buttons to choose the timer number and then press the OK but ton The timer setting window appears Timer Menu 00 03 21 11 2006 No Name Start End Date Mode BBC ONE 00 00 00 00 01 01 2006 Inactive BBC ONE 00 00 00 00 01 01 2006 Inactive BBC ONE 00 00 00 00 01 01 2006 Inactive 2 3 4 7 7 8 9 BBC ONE 00 00 OF BBC THREE
67. which have Euroconnectors to your TV use EXT 1 or EXT 2 input If an external device is connected via Euro connector sockets TV is switched to AV mode automatically In this case if both sockets are connected SCART1 has the precedence T V LINK compatible VCR Be sure to connect the T V LINK compatible VCR to the EXT 2 terminal If not the T V LINK function will not work properly e When connecting a T V LINK compatible VCR to the EXT 2 terminal be sure to con nect the decoder to the VCR If not the T V LINK function may not work properly And then set the Decoder EXT 2 function for the channel to ON to unscramble a scrambled channel RGB mode If an equipment can output the RGB signals connect it to the EXT 1 or EXT 2 terminal EXT 2 S Mode If the equipment connected to your TV set sup ports S Video Y C output from Euroconnec tor you can have a better picture quality by selecting EXT 2 S mode and connecting your equipment to the EXT 2 EXT 2 S terminal of TV See your equipment s booklet to check if your equipment has such feature Via the RCA jacks If you have an equipment such as a Cam corder which has the RCA jacks connect it to the EXT 4 terminal with the video and audio cables Berga If you have a device which outputs component video Y Pb Pr connect it to the EXT 3 termi nal with a component video cable and an au dio cable Via the ANT aerial socket If your equipment does not
68. y bar is high as well then it is a digital fre quency and digital channels will probably be found Again channels which duplicate those already in the channel list are ignored However the manual channel search will find all channels on the broadcast frequency When either search is finished press the MENU key to return to normal broadcast view ing to watch the new digital terrestrial televi sion channels found Factory Settings To reset the TV highlight the Factory Settings line in the menu and press OK A warning screen is displayed in case of accidental op eration Are you sure you want to delete the PR list and reset all settings Highlight the YES button with the lt q or P key and press OK to erase all the channels and settings A message will be displayed on the screen PR List Empty Start automatic search e Press the OK button to start the automatic search When the automatic search has finished the EDIT PR LIST menu appears Common Interface It is required to subscribe to a pay channel company to view the pay channels of the Digi tal Terrestrial broadcasting Obtain the Conditional Access Module CAM and the Viewing card by subscribing to a pay channel company then insert those to the Tele vision using the following procedure 1 Switch off the TV and unplug from the mains 2 Insert the CAM then Viewing Card to the slot that is l

JVC LT-20DA6SSP User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents