Home

JVC HR-XVC23U User's Manual

1. m TV A MONITOR CH OPERATIONS ON VCR DECK cont Manual Tracking Your unit is equipped with automatic tracking control During playback you can override this and adjust the tracking manually by pressing the CH buttons 1 Override automatic tracking During playback press SP EP on the Remote 2 Adjust the tracking manually Press CH or on the Remote or on the unit Press SP EP again to return to automatic tracking NOTE When a new tape is inserted the unit enters the automatic tracking mode automatically Soundtrack Selection Your unit is capable of recording three soundtracks HI FI L HI FI R and NORM and will play back the one you select During Playback Pressing A MONITOR changes the soundtrack as follows You can also select the soundtrack on the Function Set screen pg 76 TRACK USE On Screen Display HI FI Hi Fi sound is played back HLFIL Sound on the left Hi Fi channel is played back Sound on the right Hi Fi channel is played back NORM Sound on the normal track is played back NO Both sounds on the Hi Fi track and HI FI normal track are mixed and played back NOTES HIFI should normally be selected In this mode Hi Fi stereo tapes are played back in stereo and the normal audio track is pl
2. MEMO EN 91 VICTOR COMPANY OF JAPAN LIMITED COPYRIGHTO 2004 VICTOR COMPANY OF JAPAN LTD UC Printed in China 0204CSH ID BJ NECOAX YH
3. Flat feeder ss Matching transformer not supplied AUDIO OUTPUT VIDEO OUTPUT AC power S VIDEO OUTPUT cord F Back of unit S Video cable Audio video VHF UHF not supplied cable OUT supplied RF cable supplied H To S VIDEO input C To 75 ohm connector Terminal TV EN 15 E To connect to TV with S VIDEO AUDIO input connectors Hl Connect the unit to TV Connect the antenna unit and TV as per Basic Connection r pg 14 Connect the unit s S VIDEO OUTPUT DVD connector to the TV s S VIDEO input connector 2 Connect the unit to power source Plug the end of the AC power cord into an AC outlet This unit performs Plug amp Play Set automatically r pg 17 e The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC outlet If AUTO and the channel indicator are displayed on the front display panel before the unit is powered on the clock and tuner channels are being set automatically Wait for the time to be displayed on the front display panel before turning on the unit NOTES You can obtain high quality S VIDEO pictures If your TV is not stereo capable use the units AUDIO OUTPUT connectors to connect t
4. 06606960 REMOTE On the Remote Keep pressing VCR down during steps Hl Change the remote control code Press the number key 1 for A 2 for B 3 for C or 4 for D Set the remote control code Press ENTER to set the code NOTE Once the batteries are removed the remote control code is back to A On the unit 1 Turn off the unit Press POWER 0 1 2 Display the code Press PLAY P gt on the unit for over 5 seconds while the unit is turned off The code currently set appears on the front display panel I the code displayed on the front display panel is different from the code set on the Remote go to step El E Change the unit s code Press STOP lill on the Remote The code currently set on the Remote will be applied to the unit NOTE Even if you unplug the end of the mains power cord from the mains the code currently set remains m 73 Connecting To A Dolby Digital Decoder or An Amplifier With A Built in DTS DVD deck only These instructions enable you to connect your unit to dolby digital decoder or amplifier with a built in DTS DIGITAL AUDIO OUT O Back of unit il Dolby Digital decoder or To DIGITAL AUDIO amplifier with a built in DTS input Coaxial cable not supplied Make connec
5. EDITING VCR DECK cont You can dub selected scenes from the DVD disc to a cassette starting and stopping wherever you wish However it is not possible to dub the copy protected disc In such case ERROR appears on the front display panel Hl Load a cassette and place a disc For the VCR deck Insert a cassette with the record safety tab intact For the DVD deck 1 Press OPEN CLOSE 4 on the DVD deck to open the disc tray Place the disc in the disc tray Press OPEN CLOSE 4 on the DVD deck to close the disc tray Prepare the VCR deck for dubbing Press VCR Press SP EP to select recording speed Search for the point where you want to start dubbing by pressing PLAY P gt FF gt REW lt 4 then press STOP B E Prepare the DVD deck for dubbing 1 Press DVD 2 Search for the point where you want to start dubbing by pressing PLAY P gt FF gt REW 4 4 BPI or a 3 Press PAUSE IIB to pause playback a little before the start point 4 Start dubbing Press and hold REC then press PLAY P gt on the Remote e dub lights on the front display panel End dubbing Press STOP B Be sure to press STOP lil while the VCR indicator lights up on the unit NOTES e You can dub from DVD to VCR regardless of the scan mode setting
6. dc appears on the front display panel when there is no disc present on the disc tray 2 Select the DVD deck On the unit Press VCR DVD repeatedly so that the DVD indicator lights up On the Remote Press DVD so that the DVD indicator lights up E Start playback Press PLAY P gt Example DVD VIDEO Title number Chapter number WZ Elapsed time You can switch the display on the front display panel between the title number chapter number and the elapsed time by pressing DISPLAY It may take a few seconds to start playback If you load a DVD disc whose region code does not match the DVD deck REGION CODE ERROR appears on the TV screen For details refer to Region Number F pg 7 e With Video CD discs with PBC control or some DVD discs the menu display may appear on the TV screen after starting playback In this case select an item which you want to play back from the menu Otherwise the playback cannot go forward Refer to Locating a desired scene using the menu of the Video CD with r pg 43 or Locating a desired scene using the DVD menu I pg 43 4 Pause playback Press PAUSE Il To resume normal playback press PLAY P gt Stop playback Press STOP Ml Press OPEN CLOSE 4 on the DVD deck to open the disc tray then remove the disc e Pressing PLAY P gt resume playback from the position where you stop playback Fo
7. gt o o mode No It stops automatically after 5 minutes to protect the heads When returning from search to normal playback the picture is disturbed Should be concerned about this No it is normal Noise bar appear during search What s the problem This is normal Sometimes during Index Search the unit can t find the program I want to see Why not There may be index codes too close together RECORDING Q When pause and then resume a recording the end of the recording before the pause is overlapped by the beginning of the continuation of recording Why does this happen This is normal It reduces distortion at the pause and resume points Q Can the unit indefinitely remain in the Record Pause mode No The unit goes to its Stop mode automatically after 5 minutes to protect the heads Q What happens if the tape runs out during recording The unit stops recording and and gt on the front display panel won t stop blinking QUESTIONS AND ANSWERS TIMER RECORDING Q O and remain lit on the front display A panel Is there a problem No This is a normal condition for a timer recording in progress Q Can I program the timer while I m watching a tape or a TV broadcast You won t see the picture as it is replaced by the on screen menu but the audio from the program or tape you re viewing can be he
8. ATTENTION If there is a conflict in the timer schedule and one program overlaps with another only the parts shown below in gray will be recorded Pattern 1 The program with the lower program number will be recorded 10 00 11 00 12 00 Program 1 CH10 Program 2 CH40 Not recorded Pattern 2 The program starting earlier will be recorded 10 00 11 00 12 00 Program 1 CH10 Program 2 CH40 Not recorded Pattern 3 The program starting earlier will be recorded followed by the remaining portion of the other program 10 00 11 00 12 00 Program 1 CH10 Progam2 CH40 Not recorded OPERATIONS ON VCR DECK cont When programs overlap each other If PROGRAM NOT COMPLETED PROGRAM OVERLAP appears you have another program overlapping the program you have just made The Program Check screen appears and conflicting programs will start blinking STOP CH 10 00 12 10 45 40 1 00 125 10 00 10 PROGRAM NOT COMPLETED PROGRAM OVERLAP 4 7 THEN gt PROG END Example Program 1 you have just made and Program 4 overlap each other i Confirm the overlapping programs Overlapping programs blink on the TV screen Select the program modify Press AV then press ENTER or D You can only select of the overlapping programs NOTE If you do not mind this overlap press PROG to finish the timer program setting The program with the lower program number will be recor
9. LANGUAGE AUDIO LANGUAGE ENGLISH SUBTITLE SCREEN LANGUAGE ENGLISH 4 Select the mode Press AV to move the LANGUAGE then press ENTER Select the mode setting Press AV to select the desired setting then press ENTER e See Language Code List F pg 23 m Return to the normal screen Press SET UP NOTE When the selected language is not available on the disc the disc s default menu language is played back Language Code List EN 23 Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Hebrew Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean KOR Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian Lettish Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay MAY Maltese Burmese Nauru Nepali Dutch Norwegian Occitan Afan Oromo Oriya Panjabi Polish Pashto Pushto Portuguese Quechua Rhaeto Romance Kirundi Rumanian Russian Kinyarwanda Sanskrit Si
10. e The current date appears on the TV screen The date you enter appears in its place EN 3Z NOTES Enter the channel position You can program this unit to timer record as many as 8 programs If you try to program the unit to record a ninth Press CH PROGRAM FULL appears on the TV screen To record the extra program you must first cancel any unnecessary programs C7 pg 39 Set the tape speed Programs that start after midnight must have the next day s date Press SP EP gt Cable Box or DBS Receiver Users rn the normal screen To timer record a satellite broadcast using Express Timer Return to th screen d a satellite broad g Exp Programing Press PROG or ENTER PROGRAM COMPLETED 1 Perform steps M El Enter F 1 for the channel position appears on the TV screen for about 5 seconds then the in step B normal screen appears If PROGRAM NOT 2 Set the DBS receiver to the appropriate channel before the selected program begins COMPLETED PROGRAM OVERLAP appears on the TV LEE 3 Leave the DBS receiver s power on screen see page 40 e Repeat steps El for each additional program 9 Engage the unit s timer mode Press TIMER The unit turns off automatically and appears on the front display panel To disengage the timer mode press TIMER again To Timer Record Weekly Or Daily Serials anytime during steps El
11. 70 EDITING DVD DECK 71 Digital Audio Dubbing sees 71 REMOTE 72 Remote Control Functions 72 Connecting To A Dolby Digital Decoder or An Amplifier With A Built in DTS DVD deck only SUBSIDIARY SETTINGS Mode Set VCR deck Mode Set DVD deck Child Lock Scan Mode Set DVD deck TROUBLESHOOTING QUESTIONS AND ANSWERS SPECIFICATIONS LIST OF TERMS 73 74 74 77 80 80 81 86 87 88 DISC INFORMATION About Discs Playable Discs You can use the discs with the following logos for playback only DVD VIDEO 8 cm 12 cm disc AP Video CD Super Video CD 8 cm 12 cm disc 00515 ISI VIDEO Audio CD 8 cm 12 cm disc VIDEO CD VIDEO COMPACT CD DA files DIGITAL AUDIO e The following discs also can be played back DVD R RW discs recorded in DVD VIDEO format and finalized CD R RW discs recorded in Super Video CD Video CD or Audio CD format and finalized CD R RW discs recorded in MP3 format in accordance with the ISO 9660 format See page 62 for details CD R RW discs recorded in JPEG format in accordance with the ISO 9660 format See page 65 for details Discs other than the above cannot be played back Operation and audio quality of this unit are not guaranteed for discs that do not conform to the Compact Disc specification CD DA Before you play back a CD check for the CD logo and read the
12. E Access the Main Menu screen Press SET UP 4 Access the Tuner Set screen Press AV to move the highlight bar arrow to TUNER SET then press ENTER or D Access the Manual Channel Set screen Press AV to move the TUNER SET highlight bar arrow to BAND MANUAL CHANNEL SET AUTO CHANNEL SET then press ENTER or D SELECT WITH A v ENTER PRESS SET UP TO END Add or skip the desired channels To add channels MANUAL CHANNEL SET 1 Press the number keys to input a channel number you want to add 2 Press ENTER or D to set to ESE ETT ADD OR v THEN ENTER PRESS SET UP TO END Repeat 1 to 2 to add other channels To skip channels 1 Press AV or the number keys to select a channel number you want to skip Press ENTER or gt to set to SKIP Repeat 1 and 2 to skip other channels Return to the normal screen Press SET UP 28 Basic Playback e Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right Clean the video heads using a dry cleaning cassette ECL 3F when e Rough poor picture appears while a tape is played back e The
13. EN 65 NOTES We recommend to record a file at 640 x 480 resolution If a file has been recorded at a resolution of more than 640 x 480 it will take a longer time to be displayed e This unit supports the JPEG files whose resolution is 32 to 8192 pixel in width and 32 to 7680 pixel in height e This unit can only play back baseline JPEG files Progressive JPEG files or lossless JPEG files cannot be played back Baseline JPEG format Used for digital cameras web etc Progressive JPEG format Used for web Lossless JPEG format An old type and rarely used now e Some files on a JPEG disc may be played back distortedly e Because of the disc characteristics or recording condition some discs may not be played back or it takes time to start playback The unit does not support packet writing discs If there are any Files which are stored on a disc directly and do not belong to any Group directory the unit recognized them as belonging to an independent Group e The unit plays back Groups Files on an JPEG disc in the alphabetical order For example if there are three title Groups one two and three on a disc the playback order is three then two Files in a Group are played back in the same way Therefore an JPEG disc on the market may be played back in the different order from the order printed on its sleeve JPEG control display The JPEG control display appears on the TV screen and
14. 3 Tape to tape editing is not possible The source another video recorder camcorder has not been properly connected All necessary power switches have not been turned on The input mode is not correct Confirm that the source is properly connected Confirm that all units power switches are turned on Set the input mode to F 1 4 Camcorder recording is not possible The camcorder has not been properly connected The input mode is not correct Confirm that the camcorder is properly connected Set the input mode to F 1 5 and D gt on the front display panel won t stop blinking The end of the tape was reached during recording The program may not have been recorded in its entirety Next time make sure you have enough time on the tape to record the entire program 84 en TIMER RECORDING VCR deck TROUBLESHOOTING cont SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1 Timer recording won t work e The clock and or the timer have been set incorrectly The timer is not engaged Re perform the clock and or timer settings Press TIMER and confirm that is displayed on the front display panel 2 Timer programing is not possible Timer recording is in progress Timer programing can t be performed while a timer recording is in progress Wait until it finishes 3 on the fron
15. CO C3 C3 C3 0630693 063 NOTES e PLAY gt STOP W PAUSE SKIP 14444 and SKIP gt buttons function the same as with Audio CD discs however REW 4 4 and gt gt buttons do not function for playback Resume playback also does not function for MP3 playback en 63 Using the MP3 control display Hl Turn on the unit Press POWER 07 1 E Select the DVD deck On the unit Press VCR DVD repeatedly so that the DVD indicator lights up On the Remote Press DVD so that the DVD indicator lights up E Select the mode Be sure to set FILE TYPE to AUDIO before loading a disc r pg 78 4 Load the disc Press OPEN CLOSE 4 on the DVD deck to open the disc tray Place the MP3 disc in the disc tray For details refer to Placing a Disc I pg 9 Press OPEN CLOSE 4 amp on the DVD deck to close the disc tray e The MP3 control display appears on the TV screen when an MP3 disc is loaded I gt pg 62 Select the group Press A V to select the desired group then press D mnm Start playback Press AV to select the desired track then press ENTER or PLAY P gt You can skip a track across a group Press SKIP BP to skip to the first track of the next group when the last track of the current group is selected Pause playback Press PAUSE II To resume normal playback press PLAY Me 8 Stop playback Press
16. Press REC on the unit 2 Engage the ITR mode Press REC again O blinks and 0 30 appears on the front display panel 3 Set the recording duration If you want to record for more than 30 minutes press REC to extend the time Each press extends recording time by 30 minutes NOTES You can only perform using the REC button on the unit s front panel e Still picture playback stops automatically after 5 minutes to protect the heads When the end of the tape is reached during timer recording the unit stops and and D gt blink on the front display panel When the end of the tape is reached during timer recording or Instant Timer Recording the unit is turned off and O and blink on the front display panel During Instant Timer Recording any other timer programed recording won t start even if their start time has come In such a case the timer programed recording starts if the end time of the timer programed recording is set after the end of Instant Timer Recording after the Instant Timer Recording finishes C RESET DISPLAY EN 25 Elapsed Recording Time Indication Set the counter display Press DISPLAY until a counter reading appears on the front display panel 2 Reset the counter Press C RESET before starting recording or playback The counter is reset to 0 00 00 and show
17. REW lt lt or FF gt gt to locate the point where you start recording then press and hold PAUSE IIB and press REC to engage the Record Pause mode mnm Start the camcorder Engage the Play mode of the camcorder Start the unit Press PLAY P gt to engage the Record mode of the unit NOTES All necessary cables can be obtained from your dealer e When you select EDIT to dub tapes in step El be sure to select NORM after you finish dubbing the tapes Edit To Or From Anoiher Video Recorder Player Your unit Audio video cable Audio video cable Another recorder LII Recorder 2 Recorder Your unit v Audio video cable v AV mode i o e iui B TV receiver Audio video cable Another recorder Player en 69 You can use your unit as the source player or as the recording deck Slide the TV VCR DVD switch to the right Hl Make connections 1 When using your unit as the source player connect its AUDIO VIDEO OUTPUT connectors to the audio video input connector
18. The unit start playback from the resume point EN 45 NOTES Resume Function does not work on the Audio CD It also may not work depending on the discs If you stop the playback of a disc for which an resume point has already been memorized the memory will be updated with the new resume point e When the unit memorizes a resume point it also remembers audio language subtitle and angle settings e This function may not works for some Video CD or SVCD Looming DVD Video H a Press ZOOM during playback or while paused e Each press of ZOOM changes the magnification in the following steps ZOOM OFF gt ZOOM 1 gt ZOOM 2 gt ZOOM 3 gt ZOOM 4 ZOOM 5 ZOOM 6 gt Back to the beginning When a 16 9 aspect picture source is displayed on a 4 3 aspect TV conventional TV in Letter Box conversion mode the margins in black shown on top and bottom of the TV screen will be cropped and both left and right side parts of the picture will also be cropped You may not move up or down the zoomed in scene depending on the zooming magnification While zoomed the picture may look coarse or distorted Current magnification Zoomed in area ver TOPMENU MENU AMONTOR TVVCR SPIEP MUTE SUBTITLE DVD PICTURE 3D PHONIC 3D Phonic DVD 157 Audio VIDEO cD 3D Phonic fu
19. disc tray Place the JPEG disc in the disc tray For details refer to Placing a Disc I pg 9 Press OPEN CLOSE 4 amp on the DVD deck to close the disc tray e The JPEG control display appears on the TV screen when a JPEG disc is loaded t gt pg 65 Select the group Press A V to select the desired group then press D m Start playback Press AV to select the desired file then press ENTER or PLAY P gt You can skip a file across a group Press SKIP gt to skip to the first file of the next group when the last file of the current group is selected The slide show playback starts from the selected file e After selecting a file press PLAY We to starts slide show playback from the selected file or press ENTER to show the selected file e The playback interval time of slide show depends on the file size Pause playback Press PAUSE II To resume normal playback press PLAY We 8 Stop playback Press STOP Bl Press OPEN CLOSE 4 on the DVD deck to open the disc tray then remove the disc xU TV AV ENTER Group 11 selection To start slide show playback by specifying the group file number Press the number keys 0 10 10 to enter the group number Press the number keys 0 10 10 to enter the file number e The slide show playback starts from the f
20. pg 28 42 DVD Open Close Button OPEN CLOSE 4 amp pg 42 VHS Eject Button EJECT 4 amp r pg 28 33 Video Audio Input Connectors VIDEO AUDIO r gt pg 68 Remote Sensor Front Display Panel r pg 11 Record Button REC r pg 33 Rewind Button REW 4 r pg 28 29 44 Fast Forward Button FF B9B r pg 28 29 44 Channel Button CH r pg 33 D Progressive Scan Button PROGRESSIVE SCAN gt pg 80 REAR VIEW EN 1 DIGITAL AUDIO OUT PCM STREAM cule Region Number Label r pg 7 AC Power Cord gt pg 14 S video Output Connector S VIDEO OUTPUT gt pg 15 Audio Video Output Connectors AUDIO VIDEO OUTPUT gt pg 14 15 16 69 Q Antenna Input Connector VHF UHF IN r pg 14 FRONT DISPLAY PANEL Q Digital Audio Output Connector DIGITAL AUDIO OUT gt pg 71 Component Video Output Connectors COMPONENT VIDEO OUT r pg 16 Audio Output Connectors AUDIO OUTPUT L R Antenna Output Connector VHF UHF OUT c pg 14 These connectors are only for DVD deck Operation Mode Indicators Channel Clock Auxiliary Input Mode Display F 1 VCR deck only Counter Display VCR deck Tape Speed SP EP VCR deck only Multi information window DVD deck The current group title track chapter number s time and status information Progre
21. subtitle in the multiple languages With some discs the language should be set on the top menu pg 43 8 The subtitles do not appears on the TV screen e The disc does not contain the subtitles e The subtitle display is set to off A B Repeat Playback is in progress gt pg 51 Set the subtitles display to on F pg 54 The subtitles recorded around A B point may not appear 9 Angle cannot be changed e The scene is not recorded from the multiple angles MP3 Playback DVD deck EN 83 SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1 A disc cannot be played e No MP3 files are recorded to the disc e MP3 files do not have the correct file extension in their file names e MP3 files are not recorded in a format compliant with ISO 9660 Level 1 or 2 e The different types of files are recorded to the disc Replace the disc Add correct file extension mp3 MP3 or any uppercase and lowercase combination such as Mp3 to their file names Replace the disc Record MP3 files using a compliant application The disc which contains the different types of files may not be played because of its disc characteristics or recording conditions 2 Not MP3 files but JPEG files are played e The FILE TYPE setting is set to STILL PICTURE When both MP3 files and JPEG files are recorded to a disc set FILE TYPE to AUDIO to play fi
22. Before use insert two AA size batteries into the Remote with the polarity and O matched correctly as indicated on the battery compartment or on the lid The Remote can operate most of your unit s functions as well as basic functions of TV sets of JVC See the left column e Point the Remote toward the remote sensor The maximum operating distance of the remote control is about 8 m NOTE If the Remote doesn t work properly remove its batteries wait a short time replace the batteries and then try again l i Basic Connection Antenna or Cable Coaxial cable Flat feeder EE Matching transformer not supplied AC Outlet AC Power Cord VIDEO OUTPUT AUDIO OUTPUT il Back of unit IN Audio video cable supplied To Audio video input connectors VHF UHF VHF UHF OUT TV RF cable supplied To 75 ohm Terminal INSTALLING YOUR NEW UNIT It s essential that your unit be properly connected THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED Hl Check the contents Make sure the package contains all of the accessories listed in SPECIFICATIONS on page 87 Situate the unit Place the unit on a stable horizontal surface E Connect the unit to TV 1 Disconnect the TV antenna
23. HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE CAUTION This unit should be used with AC 120V 60Hz only To prevent electric shocks and fire hazards DO NOT use any other power source CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT ATTENTION POUR VITER LES CHOCS LECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical CAUTION Changes or modifications not approved by JVC could void user s authority to operate the equipment CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT CAUTION VISIBLE OR INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM ATTENTION RAYONNEMENT LASER VISIBLE OU INVISIBLE EN CAS D 0UVERTURE NE PAS REGARDER DANS LE FAISCEAU LP41077 002A IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electric
24. Lx pg 80 However the progressive signals will be converted to the interlace signals when dubbing e Set ON SCREEN GUIDE to OFF F pg 80 if you do not want to record the on screen display for DVD discs during dubbing There may be a discrepancy of several seconds between where you intend editing to start and where it actually starts The superimposed indication during the operation or dubbing is not recorded Set PICTURE CONTROL to EDIT F pg 75 EDITING DVD DECK Digital Audio Dubbing Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right Recorder Digital audio device MD deck etc Coaxial cable not supplied Player eos Rear o unit DIGITALAUDIO OUT EN 71 You can dub selected audio from the DVD or Audio CD disc to a MD etc However it is not possible to dub the copy protected disc Example Dubbing to a MD Hl Make connections Connect the coaxial cable between the unit and the digital audio device 2 Place a disc and load a MD For the DVD deck 1 Press OPEN CLOSE 4 on the DVD deck to open the disc tray Place the disc in the disc tray Press OPEN CLOSE 4 on the DVD deck to close the disc tray nm For the digital audio device Insert a MD E Prepare the DVD deck for dubbing 1 Press DVD and select the audio to b
25. ON SCREEN twice The on screen bar appears on the TV screen 2 Select menu item Press lt D to move the hightlight to then press ENTER e The following pop up window appears under the selected item TITLE 1 CHAP 7 TOTAL 0 27 06 P Time C CHAP gt Cava En Bs OFF E Select the repeat mode Press AV repeatedly to select A B 4 Select the start point Press ENTER at the beginning of the part you want to repeat point A e The following display appears in the on screen bar DVD VIDEO TITLE 1 CHAP 7 TOTAL 0 27 06 gt Time CoA CHAP O G3 vs xri Select the end point Press ENTER at the end of the part you want to repeat point B e A B Repeat Playback starts The selected part of the disc between point A and B is played repeatedly To cancel A B Repeat Playback Repeat from step select OFF in step El then press ENTER You can also cancel Repeat Playback by pressing SKIP 1 or SKIP gt To clear the on screen bar Press ON SCREEN NOTES e A B Repeat Playback may not work properly depending on the type of disc being used The subtitles recorded around A B point may not appear e The end of the item will be set as B point if the end of the item reached before you set the B point When playing back a DVD A B Repeat Playback is possible only within the same title A B cannot be selecte
26. While Watching Another 34 Recording eo eoo Pere teta 33 35 Recording Resume Function esee 33 Region Number x 7 Remote Control Functions 72 Repeat Playback 31 50 64 67 RESUME FUNCION s ies er e eer I asiyta ep te 45 S Satellite Auto Recording 41 Scan Mode Set DVD deck 80 Second Audio Recording 35 Semiauto Clock Setores 25 SKIp Searchi kas 30 Slow 5 29 45 Soundtrack Selection ess 32 Still Picture Frame By Frame Playback 29 45 Subtitle Selection sorsi eie tete ete 54 S VIDEO Connection 15 T Tape Position Indicator cce 12 Tape Remaining Time csse 35 Time Search iae Rr er ree 52 Timer Recording beet 36 41 TOP MENU gy u up iti lade 43 TUNER SOU EE 26 V Variable Speed Search 29 44 VEP TUNGHON i iere ete teh eren yay rege 47 w When programs overlap each other 40 Z ZOOMING Sau aha alas kaypa 45 67 3D PhOrnie s es tede 46 90 EN MEMO
27. an incorrect PBS channel from a cable TV system In this case perform Semiauto Clock Set r pg 25 or Manual Clock Set r pg 25 e f appears on the front display panel your antenna cable may not be connected to the unit or there may not be a Host PBS signal available in your area Ensure that the antenna cable is connected correctly Then turn on and off the unit the Plug amp Play setting will be automatically reactivated If Plug amp Play setting is not performed though the antenna cable is connected correctly perform Manual Clock Set CF pg 25 and Auto Channel Set CF pg 26 or Manual Channel Set r gt pg 27 18 e Monitor Set DVD deck You can select the monitor type depending the TV used when you play back DVD VIDEO discs recorded for wide screen TVs Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right C4 C5 6 C8 09 INITIAL SETTINGS cont i Turn on the unit Press POWER 0 1 2 Select the DVD deck On the unit Press VCR DVD repeatedly so that the DVD indicator lights up On the Remote Press DVD so that the DVD indicator lights up E Access the DVD Set Up menu screen Press SET UP Press lt gt to select E PICTURE Fi Select the mode Press AV to move the highlight to M
28. batteries environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly Failure to heed the following precautions may result in damage to the unit Remote or video cassette 1 DO NOI place the unit in an environment prone to extreme temperatures or humidity in direct sunlight in a dusty environment in an environment where strong magnetic fields are generated on a surface that is unstable or subject to vibration 2 DO NOI block the unit s ventilation openings or holes If the ventilation openings or holes are blocked by a newspaper or cloth etc the heat may not be able to get out 3 DO NOI place heavy objects on the unit or Remote 4 DO NOI place anything which might spill on top of the unit or Remote If water or liquid is allowed to enter this equipment fire or electric shock may be caused 5 DO NOT expose the apparatus to dripping or splashing 6 DO NOT use this equipment in a bathroom or places with water Also DO NOT place any containers filled with water or liquids such as cosmetics or medicines flower vases potted plants cups etc on top of this unit EN 7 DO NOT place any naked flame sources such as lighted candles on the apparatus 8 AVOID violent shocks to the unit during transport MOISTURE CONDENSATION Moisture in the air will condense on the unit when you move it from a
29. connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode 2 Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges 3 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANSI NFPA 70 ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SE
30. is received the main audio is recorded on both the Hi Fi and normal tracks e When this function is set to OFF the SAP audio cannot be recorded NOTES When the channel is changed on the unit The STEREO indicator appears on the screen for about 5 seconds if the program is a stereo broadcast e The SAP indicator appears on the screen for about 5 seconds if the program is a SAP broadcast e Both indicators appear when a stereo program is accompanied by SAP sound mg AUDIO MONITOR HI FI HI FI L HI FI R NORM MIX This unit can record two sound tracks simultaneously normal and Hi Fi on a Hi Fi stereo tape You can select the sound track s to listen to while playing back a Hi Fi stereo tape In addition when playing back a prerecorded tape containing two separate audio programs on the Hi Fi tracks you can choose either one by selecting either HI FI L or HI FI R HI FI Normally select this Hi Fi sound is played back HI FI L Sound on the left Hi Fi channel is played back HI FI Sound on the right Hi Fi channel is played back NORM Sound on the normal track is played back MIX Both sounds on the Hi Fi track and normal track are mixed and played back NOTES e While playing back a monaural tape sounds on the normal track will be heard regardless of this setting You can also use the A MONITOR button on the Remote to select the desired monitor sound F pg 32 II AUTO POW
31. pictures will not be shown on the screen i 20i Language e Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right INITIAL SETTINGS cont On screen Language Set VCR deck This VCR deck offers you the choice to view on screen messages in 3 different languages Hl Turn on the unit Press POWER 0 1 Select the VCR deck On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up E Access the Main Menu screen Press SET UP 4 Access the Initial Set screen Press AV to move the MAIN MENU highlight bar arrow to INITIAL SET then press ENTER or D FUNCTION SET TUNER SET INITIAL SET PRESS 4 v THEN ENTER PRESS SET UP TO END Select the language Press AV to move the INITIAL SET highlight bar arrow to LANGUAGE then press ENTER or D repeatedly until the desired language is selected SELECT WITH A V ENTER PRESS SET UP TO END m Return to the normal screen Press SET UP Siola C5 6 en 21 On screen Language Set DVD deck This DVD deck offers you the choice to view on screen messages in 3 different languages You can change the language setting ma
32. playback When you want to zoom the picture during slide show playback first press PAUSE then press ZOOM e Each press of ZOOM changes the magnification in the following steps ZOOM OFF gt ZOOM 1 gt ZOOM 2 gt Back to the beginning To resume normal playback press ENTER 68 en Edit From A Camcorder VCR CH Recorder AUDIO input Audio video cable supplied To Audio VIDEO Output connectors 40 Bi Camcorder Player EDITING VCR DECK You can use a camcorder as the source player and your unit as the recording deck Slide the TV VCR DVD switch to the right 1 Make connections Connect the camcorder s AUDIO OUT and VIDEO OUT connectors to the unit s front panel AUDIO and VIDEO input connectors When using a monaural camcorder connect its AUDIO OUT connector to the AUDIO L input connector on your unit Select the VCR deck On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up E Set the unit s input mode Press AUX number key 0 and or CH to select F 1 4 Set the edit mode See PICTURE CONTROL on page 75 Engage the Record Pause mode Use PLAY gt
33. playback Press PAUSE ID 2 Activate slow motion playback Press and hold PAUSE II for 2 seconds then release Press PAUSE IIB and release again to return to still picture NOTE During slow motion playback some noise may appear on the TV screen Press CH or on the Remote or on the unit to eliminate the noises Variable Speed Search During playback press FF gt for forward variable speed search or REW lt lt for reverse variable speed search The speed changes for each direction by pressing REW lt lt a and FF gt repeatedly When pressing FF PP SP 5x4 7x EP 11x 21x When pressing REW 4 Once REW 4 4 is pressed reverse search starts 1x normal playback speed After this process each press of REW 44 changes the search speed between 5x and 7x in SP mode 11x and 21x in EP mode SP 1x 5x 7x EP 1x 11x 21x To resume normal playback press PLAY P gt a C4 C5 6 CRE VIEWR SKIP SEARCH Skip Search During playback press SKIP SEARCH 1 to 6 times to skip over unwanted sections Each press initiates a 30 second period of fast motion playback Normal playback resumes automatically To resume normal playback during a Skip Search press PLAY J gt OPERATIONS ON VCR DECK cont Index Search Your unit automatically marks index cod
34. playback starts when a JPEG disc is loaded Total group number on Current file Total file number in disc number current group File Bonito Butterfly fish Dolphin Garden eel Manta ray Seal Swordfish Thunder Tuna Whale Whale shark Current group Current file Total file number on number disc Current group 66 n JPEG Playback You can search and play back desired groups and files using the JPEG control display Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right NOTES e PLAY gt STOP W PAUSE ID SKIP 14444 and SKIP gt buttons function the same as with Audio CD discs however REW 4 4 and FF gt gt buttons do not function for JPEG playback Resume playback also does not function for JPEG playback OPERATIONS ON DVD DECK cont Using the JPEG control display Hl Turn on the unit Press POWER 7 1 E Select the DVD deck On the unit Press VCR DVD repeatedly so that the DVD indicator lights up On the Remote Press DVD so that the DVD indicator lights up E Select the mode Be sure to set FILE TYPE to STILL PICTURE before loading a disc r pg 78 4 Load the disc Press OPEN CLOSE 4 on the DVD deck to open the
35. sound will not be picked up correctly and such a disc may cause the unit to malfunction Label side Do not damage the label side stick paper to or use any adhesive on its surface Storage Make sure that discs are kept in their cases If discs are piled on top of one another without their protective cases they can be damaged Do not put discs in a location where they may be exposed to direct sunlight or in a place where the humidity or temperature is high Avoid leaving discs in your car Maintenance of discs If there are fingerprints or other dirt adhering to a disc wipe with a soft dry cloth moving from the center outwards If a disc is difficult to clean wipe with a cloth moistened with water Never use record cleaners petrol alcohol or any anti static agents CAUTION Sometimes during playback noise or images may be garbled This is sometimes due to the disc It may not be up to industry standards These symptoms are caused by the discs not by the malfunction of the unit 10 FRONT VIEW INDEX VIDEO L AUDIO R em Power Button POWER 0 1 r pg 18 VCR Indicator r pg 28 33 VHS Cassette Loading Slot VCR DVD Button r pg 28 33 42 Disc Tray Stop Button STOP Il r pg 28 33 42 DVD Indicator r pg 42 Play Button PLAY amp r
36. the playback picture is unclear or noisy or the oblique lines of the picture are rough try to change to other modes SCREEN SAVER The TV screen may be burned out if a static picture is displayed for a long time ON When this function is set to ON the unit automatically activates the screen OFF saver function if a static picture such as an on screen display or menu is displayed for over 5 minutes FILE TYPE You can select files to play back when both MP3 files and JPEG files are AUDIO recorded on a disc STILL PICTURE AUDIO Select this to play back MP3 files STILL PICTURE Select this to play back JPEG files NOTE Be sure to open and close the disc tray after changing the setting The unit reads the disc again and the selected file type can be recognized Audio Settings The default setting is bold in the table below I DIGITAL AUDIO OUTPUT Set to the appropriate mode according to the type of the device connected to PCM ONLY DIGITAL AUDIO OUT connector on the rear of unit DOLBY DIGITAL PCM It is not necessary to set this mode when you connect no device to DIGITAL STREAM PCM AUDIO OUT connector PCM ONLY Select this when you connect the unit s DIGITAL AUDIO OUT connector to the linear PCM digital input connector of other audio device DOLBY DIGITAL PCM Select this when you connect the unit s DIGITAL AUDIO OUT connector to the digital input connector of a Dolby Digital decoder or an amplifi
37. through press WEEKLY number key 9 for weekly serials or DAILY number key 8 for daily serials Monday Friday Either WEEKLY or DAILY appears on the TV screen Pressing the button again makes the corresponding indication disappear OPERATIONS ON VCR DECK cont Check cancel and change programs 1 Disengage the timer mode Press TIMER then press POWER 0 1 Access Program Check screen Press PROG CHECK PR START STOP CH 8 00P 10 00 n Boma PRESS CHECK NEXT E Access the Program screen Press PROG CHECK again PROGRAM 1 to check more information START STOP Each time you press PROG CHECK the next IE Sa program s information WED ku appears PREESS CANCEL TO CANCEL PRESS CHECK TO NEXT EN 29 To cancel or change a program 4 Cancel or change a program Press CANCEL to cancel a program To change program settings press the appropriate button START STOP DATE CH DAILY number key 8 WEEKLY number key 9 and or SP EP Return to the normal screen Press PROG CHECK as many times as necessary If there are still some programs remaining go on to step Bl nm Return to the timer mode Press TIMER
38. 1 can be played back such as shown below Examples of DVD VIDEO labels which can be played back using this unit O O O6 Marks of discs in this instruction manual Allows operation with a Audio CD Allows operation z DVD Audio VIDEO wi ha DVD VIDEO disc disc Allows operation Allows operation witha Video CD disc with a SVCD disc Allows operation ncm including MP3 files Allows operation with a disc including JPEG files 8 EN DVD VIDEO Marks Sometimes marks are printed on a DVD disc and or on its packaging to indicate information regarding the contents and functions of a disc Check marks indicating the contents and functions of a disc Note however that in some cases a disc may not include a mark even for a function it supports Marks related to video Mark Description Number of subtitles Number of angles Recorded under the standard 4 3 aspect ratio Screen includes black bands at top and bottom of image which has a standard 4 3 aspect ratio letter box Video playback is in Wide video mode 16 9 on wide televisions but in letter box on televisions with standard 4 3 aspect ratio Video playback is in Wide video mode 16 9 on wide televisions but pan and scan is used on televisions with standard 4 3 aspect ratio either the left or right side of the image is cut out amp gi Bac Marks related to audio Mark Des
39. 1 Track 2 Track 3 Track 4 NOTE Video CD discs that support Playback Control PBC The still image or motion image which follows a menu screen is called a scene Each scene has a scene number For more details refer to Locating a desired scene using the menu of the Video CD with PBC t3 pg 43 Placing a Disc 1 Open the disc tray Press OPEN CLOSE 4 on the DVD deck to open the disc tray A uve 06660962920 Pressing the button again closes the disc tray Do not block the disc tray with your hand while it is opening or closing as this may result in hardware failure Do not place unplayable discs or any object other than a disc in the disc tray Do not press down strongly on the disc tray or place any heavy objects on it 2 Place the disc Place the disc in the disc tray with the label side facing up Since disc size changes depending on the disc to be played back be sure to correctly align the disc with the grooves for its size If the disc is not in its groove it may be scratched or otherwise damaged To insert an 8 cm disc place it according to the inner groove Care and Handling of Discs How to handle discs When handling a disc do not touch the surface of the disc Since discs are made of plastic they are easily damaged If a disc gets dirty dusty scratched or warped the images and
40. 3 GAMMA Controls brightness of neutral tints while 3 to 3 maintaining brightness of dark and bright portions BRIGHTNESS Controls screen brightness 8 to 8 CONTRAST Controls screen contrast 7 to 7 SATURATION Controls screen color depth 7 to 7 TINT Controls screen tint 7 to 7 SHARPNESS Controls screen sharpness 8 to 8 e VFP menu disappears and the following pop up window appears on the TV screen The selection menu disappears automatically if you do not change the selection for 10 seconds 0 5 Adjust the parameter Press AV repeatedly to change the setting then press ENTER The current VFP settings appear again 6 Adiust the other parameters Repeat steps 4 and 5 to adjust other parameters To return to the normal screen Press DVD PICTURE To activate your setting Press DVD PICTURE then press lt D repeatedly to select USER 1 or USER 2 that you have changed the parameters 48 Using the on screen bar mama You can check disc information while the disc is loaded and you can use some functions using the on screen bar The on screen bar allows you the various playback operations m TV AVID ENTER OPERATIONS ON DVD DECK cont How to Access the on screen bar Press ON SCREEN twice whenever a disc is loaded Example During DVD VIDEO playback DVD VIDEO TITLE 1 CHA
41. 4 EN 13 Stop Button STOP Il r pg 28 33 42 B Record Button REC r pg 33 D Reverse Skip Index Button SKIP INDEX I t r gt pg 30 43 Review Button ce V Button gt pg 18 TV VCR Channel Button TV VCR CH c See the left column Set Up Button SET UP r pg 18 3D Phonic Button 3D PHONIC r pg 46 D TV Volume Button TV VOL gt See the left column DVD Button gt pg 42 Power Button POWER r pg 18 left column TV Muting Button MUTE r See the left column Audio Monitor Button A MONITOR r gt pg 32 56 57 TV VCR Button Not function with this unit Date Button DATE r pg 36 Subtitle Button SUB TITLE r pg 54 Angle Button ANGLE r pg 55 Channel Button CH r pg 33 Programing Button PROG r pg 36 Timer Button TIMER r pg 37 Weekly Button WEEKLY r pg 37 Program Check Button PROG CHECK r gt pg 38 Return Button RETURN c pg 43 Satellite Auto Recording Button REC LINK c pg 41 10 Button Auxiliary Button AUX gt pg 68 Fast Forward Button FF BB r pg 28 29 44 Pause Button PAUSE II r pg 29 33 Forward Skip Index Button SKIP INDEX Me r gt pg 30 43 ENTER Button r pg 18 lt gt Button r pg 18 Display Button DISPLAY r pg 35 Skip Search Button SKIP SEARCH rz pg 30 DVD Picture Button DVD PICTURE r pg 47 How To Use
42. ACK DVD deck TROUBLESHOOTING cont SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1 The button do not work e The operation is prohibited on the placed disc 2 The DVD deck can not be operated e The DVD deck is not selected On the unit Press VCR DVD repeatedly so that the DVD indicator lights up On the Remote Press DVD so that the DVD indicator lights up 3 Q appears on the TV screen The operation is prohibited on the placed disc 4 REGION CODE ERROR appears on the TV screen e The disc s region number does not match that of the unit Use the discs whose region number includes ALL or 1 F pg 7 5 The disc cannot be played back The disc s region number does not match that of the unit e This type of the disc cannot be played back The disc is not placed properly The Parental Lock is engaged and the placed disc is rated higher than the set level Use the discs whose region number includes ALL or 1 F pg 7 See Unplayable Discs r pg 7 Remove the disc then place the disc properly in the disc tray F pg 9 Placing a Disc Release the Parental Lock temporarily lt pg 59 or change the set level pg 59 6 The language is not played back as you set The disc does not contain the language you set 7 Changing audio subtitle language is not possible The disc does not contain the audio
43. DBS receiver s power is on the unit will not start Satellite Auto Recording even though the amp and indicators blink When the DBS receiver shuts off once and is turned back on again the unit starts recording You can also record a program from your cable system in the same way if the system has a timer 42 in Basic Playback DETE e Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right EE 660 SS JL LJ i CO C e ATTENTION You can not use the DVD deck when the VCR deck is in the Automatic Satellite Recording standby and recording mode You can use the DVD deck when the VCR deck is in the timer standby mode To play back a MP3 JPEG disc see pages 62 67 la Load the disc Press OPEN CLOSE 4 on the DVD deck to open the disc tray The unit s power comes on automatically Place the disc in the disc tray For details refer to Placing a Disc r pg 9 OPERATIONS ON DVD DECK Press OPEN CLOSE 4 on the DVD deck to close the disc tray e Pressing PLAY P gt also close the disc tray Playback begins automatically if the auto playback DVD disc is loaded Although the VCR deck is selected the DVD deck is selected automatically if the VCR deck is in stop mode
44. ER OFF 3H OFF When this function is set to 3H the unit is turned off automatically if no operation is done within 3 hours AUTO POWER OFF IN 3 MIN appears on the screen 3 minutes before the unit is turned off Mode Set DVD deck Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right You can change various mode settings on the Mode Set screen by following the procedure described below For each mode setting see pages 78 to 80 MENU LANGUAGE gt pg 22 AUDIO LANGUAGE gt pg 22 SUBTITLE gt pg 22 ON SCREEN LANGUAGE gt pg 21 A LANGUAGE MONITOR TYPE gt pg 18 78 PICTURE SOURCE rz pg 78 SCREEN SAVER r gt pg 78 FILE TYPE pg 78 PICTURE DIGITAL AUDIO OUTPUT gt pg 78 DOWN MIX r pg 79 D RANGE COMPRESSION r pg 79 AUDIO RESUME gt pg 80 ON SCREEN GUIDE gt pg 80 PARENTAL LOCK gt pg 58 J OTHERS EN ZZ e The procedure shows how to set RESUME to ON on the DVD Set Up menu screen as an example Hl Turn on the unit Press POWER 0 1 Select the DVD deck On the unit Press VCR DVD repeatedly so that the DVD indicator lights up On the Remote Press DVD so that the DVD indicator lights up E Access the DVD Set Up menu screen Press SET UP Press lt gt to
45. Elapsed time of title disc T REM Remaining time of title disc To clear the on screen bar Press ON SCREEN NOTE While a DVD is stopped appears the time information display 50 rN mi TV ON SCREEN REPEAT 0 9 gt gt ENTER Repeat Playback TU Audio HA Ex E You can repeat playback as you like according to the type of disc DVD VIDEO during playback Audio CD during playback or in stop mode Video CD SVCD in stop mode or during playback with PBC deactivated When using the on screen bar Hl Access the on screen bar Press ON SCREEN twice The on screen bar appears on the TV screen Select menu item Press lt D to move the hightlight to ENTER e The following pop up window appears under the selected item TITLE 1 CHAP 7 TOTAL 0 27 06 P time c gt CHAP gt GJ us Gaia A OFF then press OPERATIONS ON DVD DECK cont E Select the repeat mode Press AV repeatedly to select the Repeat mode then press ENTER The mode changes as follows DVD VIDEO CHAPTER TITLE A B OFF Back to the beginning CHAPTER The current chapter is played back repeatedly TITLE The current title is played back repeatedly A B The desired part is played back repeatedly F pg 51 OFF Each title and ch
46. JVC MM DVD PLAYER amp VIDEO CASSETTE RECORDER HR XVC23U IRI SQ PB papas Hise ace aise W omer nter below the Model No and erial No which are located on the INSTRUCTIONS rear of cabinet Retain this information for future reference Model No Serial No LPT0895 001A 2 Dear Customer Thank you for purchasing the JVC DVD player amp VHS video cassette recorder Before use please read the safety information and precautions to ensure safe use of your new unit CAUTIONS 7 RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK CAUTION NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CAUTION THIS PRODUCT USES A LASER SYSTEM USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
47. ONITOR TYPE then press ENTER Select the mode setting Press AV to select the desired setting then press ENTER Return to the normal screen Press SET UP en 19 The default setting is bold in the table below e default setting is bold in the table below Pan amp Scan Letter Box In general DVD VIDEO disc are produced for a wide screen MONITOR TYPE TV with 16 9 aspect ratio 16 9 Wide television conversion Material with this ratio will not fit to a TV with 4 3 aspect Select this when the aspect ratio of your TV is ratio There are two styles to display the image Pan amp Scan fixed to 16 9 wide TV The unit automatically PS and Letter Box LB adjusts the screen width of the output signal Pan amp Scan correctly when playing back a picture whose The right and left side of the image are sS aspect ratio is 4 3 cut off The image fills the screen 4 3 LB Letter Box conversion e Select this when the aspect ratio of your TV is 4 3 conventional TV While viewing a wide etter Box e ii screen picture the black bars appear on the Black bands appear at the top and top and the bottom of the screen bottom of the image The image itself 4 3 PS Pan amp Scan appears in 16 9 aspect ratio Select this when the aspect ratio of your TV is 4 3 conventional TV While viewing a wide screen picture the black bars do not appear however the left and right edges of the
48. P 7 TOTAL 0 27 06 2 time CHAP gt 2 C3 vs 25 Example During Video CD playback VCD TRACK 33 0 0123 P TIME eorr Oysr Contents of the on screen bar during playback DVD DVD VIDEO sasata 7 8 Video CD 4 VCD TIME 0 01 23 we err bb m Disc type Current transfer rate Megabits per second Current title for DVD ro jo Current chapter number for DVD or track number for other type of discs 5 Time information r pg 49 Playback status 3 appears during playback O G appears during fast forward reverse D CI appears during playback in forward slow motion reverse slow motion IB appears when paused appears when stopped Select this to change time information See 5 in the illustration above pg 49 Select this for Repeat Playback r pg 50 lt Select this for time search function r pg 52 Select this for chapter search function r pg 53 Select this to change audio language or channel r pg 56 57 Select this to change subtitle language r 54 Select this to change view angle r pg 55 EN 49 Basic operation on the on screen bar Example When selecting the Repeat mode of DVD Durin
49. Press AV repeatedly to select the desired subtitle language then press ENTER e Each time you press the button the subtitle language changes To clear the on screen bar Press ON SCREEN NOTES It is impossible to select OFF when using the on screen bar To select OFF press ON SCREEN to clear the on screen bar then press SUB TITLE repeatedly until OFF is selected For DVD VIDEO Some subtitle languages are abbreviated in the pop up window See Language Code List r gt pg 23 For SVCD SVCD can contain up to four subtitles Pressing SUB TITLE changes the subtitles regardless of whether the subtitles are recorded or not Subtitles will not change if no subtitle is recorded e When appears on the TV screen in step El subtitle language is not recorded When using the SUB TITLE button 1 Access the menu Press SUB TITLE e The following pop up window appears on the TV screen Example DVD ENGLISH is selected out of 3 subtitle languages recorded 1 3 ENGLISH 2 Select the subtitle language Press AV repeatedly to select the desired subtitle language To select OFF press SUB TITLE repeatedly until OFF is selected e Each time you press the button the subtitle language changes The pop up window disappears if no operation is done for about 5 seconds NOTE When O appears on the TV screen in step El
50. R then press A repeatedly to move the hightlight to select the level of restriction then press ENTER e The hightlight moves to EAT PASSWORD The smaller the value of level is the more restrictive the Parental Lock level is e Select NONE to cancel this function A g O 7 Foountrycobe us E El Enter the password Press the number keys to a Ato enter a four digit number as COUNTRY CODE us PARENTAL LOCK your password then press Y e The hightlight moves to EXIT SELECT NEN PASSWORD PRESSO 9 KEY s mecs 22 TO EXT PRESSISET UP Return to the OTHERS menu screen Press ENTER e The f OTHERS menu resumes To return to the normal screen Press SET UP NOTE Remember your password or make a note of it To change the settings You can change the Parental lock settings later Hl Access the Parental Lock screen 1 Press SET UP 2 Press lt D to select f OTHERS 3 Press AV repeatedly to move the hightlight to PARENTAL LOCK then press ENTER The PARENTAL LOCK sub menu appears on the TV screen You can only move the hightlight to PASSWORD or to EXIT before you enter your password Enter password Press the appropriate number keys to enter 4 digit password then press ENTER If you enter the wrong password WRONG RETR
51. REEN GUIDE 03222 80 ON SCREEN LANGUACE 21 PICTURESOUNRCE 2r ccrte Sa 78 RESUME iie ree etre Hee E Er eR Eye 80 SCREEN SAVER gitu rn Iur rer pis maqa a 78 SUBTITLE seid a a a sau a aa s 22 Mode Set VCR deck 2ND AUDIO RECORD 76 AUDIO MONITOR n reign ua 76 AUTO POWER OFF 76 AUT O SP EP TIMER toner eee dba 75 BLUE BACK qu aa 76 PICTURE CONTROL 75 SUDPERIMP ONSE S oes dr reden erri eR Ere as 75 MIDEOX STABILIZER 3 2 Ite ERR 76 control display eese 62 N Next Function Memory a eneaeaes 31 O OPERATIONS ON DVD DECK 42 67 OPERATIONS ON VCR DECK 28 41 P PAN amp SCAN u auqa e TEE T SE EEEa 19 Parental Lock Country Area Code List 60 To change the settings ees 59 To set Parental Lock for the first time 58 To temporarily release the Parental Lock 59 Playback DVD deck 42 61 Playback JPEG css aa et etr eee 66 67 Playback MP3 rei eoo eti treten 63 64 Playback VCR deck 28 32 Playback Control PBC Function 43 52 Plug amp Play Set tiber rehenes 17 R Record One Program
52. RVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE 4 EN USE 1 Accessories To avoid personal injury Do not place this product on an unstable cart stand tripod bracket or table It may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Use a mounting accessory recommended by the manufacturer and follow the manufacturer s instructions for any mounting of the product Do not try to roll a cart with small casters across thresholds or deep pile carpets PORTABLE CART WARNING Symbol provided by RETAC 2 Product and Cart Combination A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn 3 Water and Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like 4 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 5 Attachments Do not use attachments not recommended by the manufacturer of this product as they may caus
53. STOP Bl Press OPEN CLOSE 4 on the DVD deck to open the disc tray then remove the disc 64 rN TV AV ENTER Group track selection To start playback by specifying the group track number Press the number keys 0 10 10 to enter the group number Press the number keys 0 10 10 to enter the track number The entered number appears in the track number indication and playback starts from the track you have specified Example To select 3 Press 3 Toselect14 Press 10 then 4 Toselect20 Press 10 then 10 Or press 10 twice then 0 To select 24 Press 10 10 then 4 To select 110 Press 10 ten times then 10 To select 150 Press 10 fourteen times then press 10 once NOTE You cannot select 150 even if you press 10 fifteen times then press 0 once OPERATIONS ON DVD DECK cont Repeat Playback You can repeat playback of the current group track or all groups While MP3 control display is on the TV Hl Select the mode Press REPEAT to select the desired repeat mode e Each time you press REPEAT the mode changes as follows TRACK GROUP ALL OFF No indication Back to the beginning TRACK The current track is played back repeatedly GROUP All tracks of the current group are played back repeatedly ALL All tracks are pl
54. TOTM OmMOAS Saint Lucia Liechtenstein Sri Lanka Liberia Lesotho Lithuania Luxembourg Latvia Libyan Arab Jamahiriya Morocco Monaco Moldova Republic of Madagascar Marshall Islands Mali Myanmar Mongolia Macau Northern Mariana Islands Martinique Mauritania Montserrat Malta Mauritius Maldives Malawi Mexico Malaysia Mozambique amibia ew Caledonia iger orfolk Island igeria icaragua etherlands orway epal auru iue ew Zealand Oman Panama Peru French Polynesia Papua New Guinea Philippines Pakistan Poland Saint Pierre and Miquelon Pitcairn Puerto Rico Portugal Palau Paraguay Qatar R union Romania Russian Federation Rwanda Saudi Arabia Solomon Islands Seychelles Sudan Sweden Singapore Saint Helena Slovenia Svalbard and Jan Mayen Slovakia Sierra Leone San Marino Senegal Somalia Suriname Sao Tome and Principe El Salvador Syrian Arab Republic Swaziland Turks and Caicos Islands Chad French Southern Territories Togo Thailand Tajikistan Tokelau Turkmenistan Tunisia Tonga East Timor Turkey Trinidad and Tobago Tuvalu Taiwan Province of China Tanzania United Republic of Ukraine Uganda United States Minor Outlying Islands United States Uruguay Uzbekistan Vatican City State Holy See Saint Vincent and the Grenadines Venezuela Virgin Islands British Virgin Islands U S Viet Nam Vanuatu Walli
55. The unit starts playback from the specified time To clear the on screen bar Press ON SCREEN NOTES e When Q is displayed on the TV screen in step El you have selected a point that excesses the recording time of the disc Some DVD VIDEO discs do not contain time information and it is no possible to use the Time Search function In such a case Q is displayed on the TV screen as well e Time Search does not work while you play back the Video CD or SVCD with the PBC Function Reactivate the Playback Control PBC Function You can reactivate the PBC function when you play back a PBC compatible Video CD disc without PBC function Press TOP MENU during playback i TV ON SCREEN 0 9 Haa EN 5 3 Chapter Search DVD Audio a E EZ You can start playback the desired chapter using the on screen bar Hl Access the on screen bar Press ON SCREEN twice The on screen bar appears on the TV screen 2 Select menu item Press lt D to move the hightlight to then press ENTER e The following pop up window appears under the selected item TITLE 1 CHAP 7 TOTAL 0 27 06 P TME oo Q2u a nai CHAPTER __ Select the chapter Press the number keys 0 9 to enter the desired chapter number then press ENTER e The unit starts playback from the selected chapter Examples
56. To select track 5 press the number key 5 To select track 15 press the number key 1 and 5 To select track 25 press number key 2 and 5 It is not possible to use the number key 10 and 10 If you have specified a wrong selection Enter the appropriate number keys again To clear the on screen bar Press ON SCREEN NOTES e When Q is displayed on the TV screen in step El the chapter you have selected is not contained in the disc or chapter search does not work on the disc Chapter Search starts automatically when you select the desired chapter in step El depending on the disc 54 i TV SUB TITLE ANGLE Subtitle Selection UR Video Audio VIDEO cD cD You can select subtitle language e During playback When using the on screen bar Hl Access the on screen bar Press ON SCREEN twice The on screen bar appears on the TV screen Select menu item Press lt D to move the hightlight to EJ ENTER e The following pop up window appears under the selected item Example DVD ENGLISH is selected out of 3 subtitle languages recorded DVD VIDEO TITLE 1 CHAP 7 TOTAL 0 27 06 P TIME eorr CHAP S 2 vs Cxtus _ ENGLISH then press OPERATIONS ON DVD DECK cont E Select the subtitle language
57. UTO or the desired time zone is selected Each time you press the button the time zone changes as follows AUTO lt ATLANTIC lt EASTERN lt CENTRAL lt gt MOUNTAIN PACIFIC ALASKA HAWAII back to the beginning NOTE If an incorrect time is displayed by the Plug amp Play function you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system If you selected AUTO for the host channel in step Hl be sure to select the correct time zone manually EN 25 H Complete the Semiauto Clock Set Press SET UP to return to normal screen IMPORTANT Turn off the unit after performing Semiauto Clock AUTO will appear on the front display panel while the clock is being set The current clock time will appear automatically when the clock setting is complete AUTO DAYLIGHT SAVING TIME This function enables automatic adjustment of the unit s clock at the start and end of Daylight Saving Time With Auto DST activated on the first Sunday of April at 2 00 AM the clock is adjusted to 3 00 AM on the last Sunday of October at 2 00 AM the clock is adjusted to 1 00 AM Manual Clock Set First follow steps to Preparations r gt pg 24 then go to the following steps Hl Set time date and year Press AV until the desired time appears then press ENTER or gt Set the da
58. Y appears at the bottom of the TV screen Enter the correct password parentatock A J O 7 COUNTRY CODE us EXIT SELECT NEW PASSWORD PRESS 0 9 KEY enmen 92 TO EXT PRESS GET UP Change the country code Press AV to select the country code then press ENTER See Country Area Code List for Parental Lock r gt pg 60 When you change the country code you must select the level 4 Change the level Press AV to select the desired level then press ENTER EN 59 Enter your new password Press the appropriate number keys to enter 4 digit password then press ENTER The password entered in the this step becomes the new password If you do not change the password enter the same password as in the step Hl Even if you want to change only the country code and or level do not forget to enter the password after changing the country code and or the level Otherwise the new country code and or the level will not become effective m Return to the normal screen Press SET UP NOTES e When you enter the wrong password more than 3 times in step on the left column the highlight moves to EXIT automatically and AV does not work If you forget your password enter 8888 in step Hl To temporarily release the Parental Lock When you set the parental level strictly some discs may not be played back at all When you insert such a disc and try
59. al energy can perform many useful functions But improper use can result in potential electrical shock or fire hazards This product has been engineered and manufactured to assure your personal safety In order not to defeat the built in safeguards observe the following basic rules for its installation use and servicing ATTENTION Follow and obey all warnings and instructions marked on your product and its operating instructions For your safety please read all the safety and operating instructions before you operate this product and keep this booklet for future reference INSTALLATION 1 Grounding or Polarization A Your product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug B Your product may be equipped with a 3 wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug 2 Power Sources Op
60. apter is played back once Video CD SVCD CD TRACK ALL A B OFF Back to the beginning TRACK The current track is played back repeatedly ALL All tracks are played back repeatedly A B The desired part is played back repeatedly F pg 51 OFF Each track is played back once A B cannot be selected while stopped To clear the on screen bar Press ON SCREEN To cancel Repeat Playback Repeat from step select OFF in step El then press ENTER When using the REPEAT button Hl Access the repeat mode Press REPEAT during playback of the item you want to repeat Repeat mode is displayed on the TV 2 Select the repeat mode Press REPEAT repeatedly to select the desired repeat mode To stop Repeat Playback press STOP I To cancel Repeat Playback press REPEAT repeatedly until OFF appears on the TV screen The pop up window disappears if no operation is done for about 5 seconds NOTES Repeat Playback is not possible with a Video CD and SVCD with PBC function Repeat Playback may not work properly depending on the type of disc being used You cannot select A B Repeat Playback by pressing REPEAT pw TV ON SCREEN Ha gt gt ENTER EN 54 A B Repeat Playback TA UT Audio L3 EZ You can repeat the desired part Hl Access the on screen bar Press
61. ard SPECIFICATIONS GENERAL Power requirement AC 120 V 60 Hz Power consumption Power on 22W Power off 2 0 W Temperature Operating 5 C to 40 C 41 F to 104 F Storage 20 C to 60 4 F to140 F Operating position Horizontal only Dimensions WxHxD 435 mm x 93 mm x 272 mm Weight 4 1 kg Format VHS NTSC standard Maximum recording time SP 210 min with ST 210 video cassette EP 630 min with ST 210 video cassette VIDEO AUDIO VCR decl Signal system NTSC color signal and EIA monochrome signal 525 lines 60 fields DA4 Double Azimuth head helical scan system Signal to noise ratio 45 dB Horizontal resolution 230 lines 70 Hz to 10 000 Hz Normal audio 20 Hz to 20 000 Hz Hi Fi audio RCA connectors IN x 1 OUT x 1 Recording system Frequency range Input Output VIDEO AUDIO DVD deck Signal system NTSC Applicable disc DVD 12 cm 8 cm CD 12 cm 8 cm Audio characteristics DVD 4 Hz 22 KHz Frequency response 4 Hz 20 KHz S N Ratio 90 dB Harmonic distortion 0 1 96 Wow and flutter Below Measurable Level Dynamic range 90 dB Output Component Y RCA 1 0 Vp p 75 ohm Component Pp Pn RCA 0 7 Vp p 75 ohm RCA 2 Vrms 1 Kohm COAXIAL 0 5 Vp p 75 ohm Audio Digital Audio EN 7 TUNER Tuning system Channel coverage Frequency synthesized tuner VHF Channels 2 13 UHF Channels 14 69 CATV 113 Channe
62. ayed back repeatedly OFF no indication To stop Repeat Playback press STOP IB To cancel Repeat Playback press REPEAT repeatedly until the repeat mode display disappears on the TV screen You can also quit Repeat Playback in the following cases Press OPEN CLOSE to open the disc tray Turn off the unit Each track is played back once To return to the MP3 control display Press STOP IB About JPEG Disc This unit can playback CD discs recorded by the JPEG format we refer to those discs as JPEG discs in this manual Operations for JPEG discs are similar to those for Audio CD discs though there are some restrictions and differences What is JPEG JPEG is the abbreviation of Joint Photographic Expert Group JPEG is a still picture data compression system On a JPEG disc each still picture is recorded as a file which usually belongs to a Group folder T Fil Ajpg Group 1 File B jpg File C jpg JPEG disc File D jpg File E jpg File F jpg This unit can recognize up to 99 Groups and up to 150 Files per Group If a disc includes more than the Files above limit the unit stops detecting Files when the number of detected Files reaches the limit and ignores the subsequent Files The unit also ignores any non JPEG file in the disc NOTES for making a private JPEG disc using a CD R CD RW disc e Select ISO9660 as the disc format e Finalize the disc
63. ayed back automatically for tapes with only normal audio e SUPERIMPOSE must be set to ON or the on screen displays will not appear 7 pg 75 Basic Recording Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right 56 jo o o Recording Resume Function If there is a power outage during recording Instant Timer Recording or timer recording F pg 33 34 36 the recording will resume automatically when power is restored to the unit unless the unit s memory backup has expired EN 33 Hl Load a cassette Insert a cassette with the record safety tab intact The unit s power comes on automatically and the counter is reset to 0 00 00 Select the VCR deck On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up E Choose a program Press CH or the number keys to select the channel you wish to record 4 Set the tape speed Press SP EP The current setting appears on the front display panel or TV screen Press SP EP again to change the setting while the tape speed is displayed on the TV screen Start recording Press and hold REC and press PLAY P gt on the Remote or press REC on the unit mnm Pause Resume recor
64. ch mode Still Picture Frame By Frame Playback mam 75 KO Pause during playback Press PAUSE ID 2 Activate frame by frame playback Press PAUSE IIB to advance a still picture To resume normal playback press PLAY P gt Slow Motion DVD LI Audio VIDEO M During playback press PAUSE II then press REW 444 for reverse slow motion playback or FF BB for forward slow motion playback e Each press of FF changes the playback speed as follows 1 32 1 16 1 8 1 4 1 2 e Each press of REW 4 4 changes the playback speed as follows only for DVD VIDEO discs 1 32 1 16 1 8 1 4 1 2 To resume normal playback press PLAY P gt NOTES Reverse slow motion playback is possible only with the DVD VIDEO discs e This function may not works for some Video CD or SVCD Resume Function UM Miu Audio VIDEO MU cD It is possible to memorize the position where you stop playback and resume playback from that position Be sure to set RESUME to ON I pg 80 1 Memorize the resume point Press STOP W during playback rESuM appears on the front display panel The unit enters Resume Stop mode and memorize the position where you stop playback as the resume point To clear the resume point Press STOP lil in stop mode Press POWER 0 1 to turn off the unit Eject the disc e Set RESUME to OFF I pg 80 2 Resume playback Press PLAY P gt
65. cold place to a warm place or under extremely humid conditions just as water droplets form in the surface of a glass filled with cold liquid Moisture condensation on the head drum will cause damage to the tape In conditions where condensation may occur keep the unit turned on for a few hours to let the moisture dry ATTENTION To mobile phone users Using a mobile phone in the vicinity of the unit may cause picture vibration on the TV screen or change the screen to a blue back display On placing the unit Some TVs or other appliances generates strong magnetic fields Do not place such appliance on top of the unit as it may cause picture disturbance EN DISC INFORMATION About Discs INDEX INSTALLING YOUR NEW UNIT Basic Connection S VIDEO Connection DVD deck only Component Video Connection DVD deck only INITIAL SETTINGS Plug amp Play Set Monitor Set DVD deck Language Clock Set Tuner Set OPERATIONS ON VCR DECK Basic Playback Playback Features Basic Recording Recording Features Express Timer Programing Satellite Auto Recording OPERATIONS ON DVD DECK Basic Playback Playback Features Using the on screen bar Parental Lock About MP3 Disc MP3 Playback About JPEG Disc JPEG Playback CONTENTS EDITING VCR DECK 68 Edit From A Camcorder 68 Edit To Or From Another Video Recorder 69 Dubbing from DVD to VCR
66. cription Number of audio tracks gt Dolby Digital mark Dolby Laboratories has developed a digital surround system for the home This mark indicates that you may enjoy 5 1 channel audio front left and right center rear left and right and a channel for LFE Low Frequency Effects D I potev DIGITAL DTS Digital Theater System The DTS decoder on this unit enables you to enjoy DTS audio with the connected TV s speakers by converting 5 1 channel audio signals into 2 channel signals DTS Down Mixing The decoder also outputs the original DTS 5 1 channel audio signals from the DIGITAL AUDIO OUT connector on this unit dts 2 0 DIGITAL OUT DISC INFORMATION cont File Structure of Discs DVD VIDEO Typically DVD VIDEO discs are made up of larger units called titles Each title has a number title number that can be used to select desired titles Titles are further divided into units called chapters Each chapter has a number chapter number that can also be used to select desired chapters Note that some discs are not divided into titles and chapters Title 1 Title 2 E Chapter 3 Chapter 1 Chapter 2 oe 1 2 lt yy Audio CD Video CD Typically Audio CD discs are divided into separate tracks each containing one song Each track is assigned a number For example the third track is Track 3 The same is true for Video CD discs Track
67. ct VHS TC 20 ST C20 TC 30 ST C30 TC 40 ST C40 Compact VHS camcorder recordings can be played on this unit Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full sized VHS cassette This unit can record on regular VHS and Super VHS cassettes However it will record regular VHS signals only S VHS recording is not possible with this unit This unit is equipped with SQPB S VHS QUASI PLAYBACK that lets you watch tapes recorded in the S VHS format and the SP mode with regular VHS resolution SOPB does not deliver Super VHS resolution Playback Features Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right CH CH II ATTENTION In the search still slow motion or frame by frame playback mode e the picture will be distorted the noise bars will appear there may be a loss of color you cannot hear the sound EN 29 Still Picture Frame By Frame Playback Pause during playback Press PAUSE II If there is vertical jitter press CH the Remote or on the unit to correct the picture 2 Activate frame by frame playback Press PAUSE IIB to advance a still picture Slow Motion Pause during
68. d while stopped 52 N mab TV ON SCREEN lt I gt ENTER OPERATIONS ON DVD DECK cont Time Search Tm UT Audio r3 EZ You can play back a disc from the desired point by specifying the elapsed time from the beginning of the current title for DVD VIDEO or the disc for Audio CD Video CD using the Time Search When a PBC compatible Video CD is played back be sure to inactivate PBC function before you perform Time search by pressing the number keys instead of the PLAY P gt button when you start playback Hl Access the on screen bar Press ON SCREEN twice The on screen bar appears on the TV screen Select menu item Press lt gt to move the hightlight to then press ENTER e The following pop up window appears under the selected item DVD VIDEO TITLE 1 CHAP 7 TOTAL 0 27 06 gt TIME Q2n Gaus Buin TIME E Select the time Press the number keys 0 9 to enter the time then press ENTER Example To play back from a point 2 hours 34 minutes 08 seconds elapsed TIME _ __ __ TIME 2 __ __ Press 2 Press 3 TIME 2 3_ __ TIME 2 34 __ Press 4 Press 0 TIME 2 34 0_ TIME 2 34 08 Press 8 If you have specified a wrong selection Press lt repeatedly until the wrong number is erased then press number keys to enter the correct numbers e
69. ded and the other one will not be recorded correctly If no changes are made for approximately 1 minute the unit will return to the normal screen E Cancel or change program setting To cancel a program press CANCEL when the Program screen you do not want is shown PROGRAM COMPLETED appears on the TV screen for about 5 seconds then the normal screen appears To change a program press the appropriate button START STOP DATE CH DAILY number key 8 WEEKLY number key 9 and or SP EP when the Program screen on which you want to make changes is shown then press ENTER PROGRAM COMPLETED appears on the TV screen for about 5 seconds then the normal screen appears NOTE If the overlap is not yet solved or another overlap occurs with the timer program setting after making the last correction on a program the conflicting programs will be shown on the Program Check screen again Repeat the above steps again until the overlap is solved EN 4 t t A t ATTENTION e U 0 Be sure not to turn on the DBS receiver before the program is executed otherwise the unit will start recording when the DBS receiver s power is turned on e R eco rd l n If you have connected another appliance other than a DBS receiver to the AUDIO VIDEO input F 1 connector be sure not to engage the Satellite Auto Recording mode This function allows you to automatically record a othe
70. ding Press PAUSE II Press PLAY P gt to resume recording You can select channel during the Record Pause mode Stop recording Press STOP Bl Then press EJECT 4 on the VCR deck to remove the cassette 34 0 Recording Features Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right CHEESE I e Accidental erasure prevention To prevent accidental recording on a recorded cassette remove its safety tab To record on it later cover the hole with adhesive tape EZ Record safety tab OPERATIONS ON VCR DECK cont Record One Program While Watching Another Once recording is in progress all you need to do is to set the channel controls on the TV for the station you wish to view The program selected with the TV s channel controls appears on the TV screen while the one selected with the unit s CH buttons is recorded on the tape NOTE You can also use the DVD deck in the following cases Before use be sure to turn on the unit and select the DVD deck e During recording e During timer recording e During timer standby mode Instant Timer Recording ITR This easy method lets you record for from 30 minutes to 6 hours selectable in 30 min increments and shuts the unit off after recording is finished Start recording
71. dio Dubbing 71 EDITING VCR DECK Dubbing from DVD to VCR 70 Edit From A Camcorder 68 Edit To Or From Another Video Recorder 69 Elapsed Recording Time Indication 35 Express Timer Programing 36 G Gro p file selection uiii n Ir reno 67 Group track selection aa 64 INDEX 52 28 28 10 Index Search ie YR 30 Instant REVIEW fete er atte e Rer Ee e SAPE 30 Instant Timer Recording ITR 34 J LIST OF TERMS L Language 20 Language Code 23 Menu Audio Subtitle Language Set DVD deck Gilly Rit 22 On screen Language Set DVD deck 21 On screen Language Set VCR deck 20 Letter BOX sma e a e 19 Locating the start point of the item or skip the item 44 M Manual Channel Set 2 er 27 Manual Clock Set tte 25 Manual Tracking 32 Mode Set DVD deck AUDIO LANGUAGE 22 D RANGE COMPRESSION 79 DIGITAL AUDIO OQUP irsini ettet te 78 DOWN MIX echte ee cene ko 79 FIPETYPE ulaqa pe ent RES 78 MENU LANGUAGE eese 22 MONITOR 19 78 ON SG
72. dow See Language Code List F pg 23 e If Q appears on the TV the current scene does not contain plural audio languages When using the button Hl Access the menu Press A MONITOR e The following pop up window appears on the TV screen Example ENGLISH is selected out of 3 audio languages recorded OD 1 3 ay ENGLISH Select the audio language Press AV or A MONITOR repeatedly to select the desired audio language e Each time you press the button the audio language changes The pop up window disappears if no operation is done for about 5 seconds NOTE Some audio languages are abbreviated in the pop up window See Language Code List r pg 23 Audio Channel Selection US Video MJ When you play certain karaoke Video CD SVCD you can enjoy karaoke by selecting the audio channel to play The sound of each audio channel depends on the contents of the disc e During playback When using the on screen bar 1 Access the on screen bar Press ON SCREEN twice The on screen bar appears on the TV screen 2 Select menu item Press lt D to move the hightlight to GD ENTER e The following pop up window appears under the selected item then press Example ST stereo is selected VCD TIME 0 04 58 gt TIME COOFF Gp 1 3 ST E Select the audio channel Press AV repeatedly t
73. e clock and tuner channels separately I pg 24 27 Depending on areas or reception conditions the unit may not receive the Auto clock setting data from the PBS channel If this function is taking a considerable amount of time it may be necessary to perform the Semiauto or Manual Clock Set procedure C m 06609690 EN 17 This unit sets the clock and tuner channels automatically when AC power cord is first connected to an AC outlet The antenna cable must be connected for the Plug amp Play setting The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels We call this TV channel the host channel and it is a PBS channel in your area Hl Perform Plug amp Play setup Connect the antenna cable to the unit 7 pg 14 Then connect the AC power cord to an AC outlet Do not turn on the unit The clock and tuner channels will be set automatically NOTES e Auto Clock Set is performed first AUTO blinks on the front display panel during Auto Clock Set e Auto Channel Set is performed next Auto Channel Set scans all the channels that are receivable by your unit During Auto Channel Set the channel numbers are displayed as they are scanned and set When Plug amp Play setting has been complete successfully the correct clock time is displayed If you perform Plug amp Play setting successfully
74. e TV s component video input connectors Connect the unit power source Plug the end of the AC power cord into an AC outlet This unit performs Plug amp Play Set automatically r pg 17 e The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC outlet If AUTO and the channel indicator are displayed on the front display panel before the unit is powered on the clock and tuner channels are being set automatically Wait for the time to be displayed on the front display panel before turning on the unit NOTES e You can obtain high quality component video pictures If your TV is not stereo capable use the unit s AUDIO OUTPUT connectors to connect to an audio amplifier for Hi Fi stereo sound reproduction To operate the unit with your TV using the Component Video connection set your TV to its AV mode You can also use the TV VCR button on the unit s Remote to set JVC TV to the AV mode For switching the TV s mode refer to the instruction manual of your television By using the component video connection you can view the images in the progressive mode For switching to the progressive mode refer to Scan Mode Set DVD deck r pg 80 INITIAL SETTINGS Plug amp Play Set Auto Clock Set Auto Tuner Set ATTENTION If you use a cable box Plug amp Play will not function set th
75. e dubbed 2 Search for the point where you want to start dubbing by pressing PLAY P gt FF gt REW 44 then press STOP IB 3 Press REW lt lt a little then press PLAY We to start playback 4 Press PAUSE II to pause playback a little before the start point 4 Prepare the audio device for dubbing Select the input mode Start dubbing Press PLAY P gt to start playback on the DVD deck Start recording on the audio device n End dubbing Stop recording on the audio device Then press STOP B to stop playback on the DVD deck NOTES There may be a discrepancy of several seconds between where you intend editing to start and where it actually starts You can also dub a Video CD or SVCD Set DIGITAL AUDIO OUTPUT to PCM ONLY gt pg 78 72 EN Remote Control Functions Remote A B C D Code Switching The Remote is capable of controlling four JVC video units independently Each of units can respond to one of four codes A B C or D The remote control is preset to send A code signals because your unit is initially set to respond to A code signals You can easily modify your unit to respond to B C or D code signals Before performing the following steps Slide the TV VCR DVD switch to the right
76. e hazards 6 Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 7 Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat SERVICING 1 Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 2 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way When
77. ead batteries with new ones TAPE TRANSPORT VCR deck SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1 During recording the tape does not run The counter display blinks on the front display panel e The unit is in the Record Pause mode Press PLAY P gt to resume recording 2 The tape will not rewind or fast e The tape is already fully rewound or Check the cassette forward fast forwarded PLAYBACK VCR deck SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1 The VCR deck can not be operated The VCR deck is not selected On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up 2 The playback picture does not appear while the tape is running e The TV receiver is not set to the AV mode Set the TV to its AV mode 3 Noise appears during visual search e This is normal 4 Noise appears during normal playback The automatic tracking mode is engaged Try manual tracking I pg 32 5 The playback picture is blurred or interrupted while TV broadcasts are clear or USE CLEANING CASSETTE message appears on the screen The video heads may be dirty Use a dry cleaning cassette ECL 3F or consult your JVC dealer 6 Breaks are noticeable in Hi Fi soundtrack The automatic tracking mode is engaged Try manual tracking I pg 32 82 EN PLAYB
78. ed out of 3 view angles recorded Select the view Press AV or ANGLE repeatedly to select the desired view angle e Each time you press the button the angle of the scene changes The pop up window disappears if no operation is done for about 5 seconds Example 1 3 2 3 3 3 Back to the beginning 56 EN m TV A MONITOR ON SCREEN ENTER Audio Language Selection DVD Video Audio VIDEO CD CD Some DVD discs contain the multiple audio You can select the audio language of movies DVD VIDEO During playback When using the on screen bar Hl Access the on screen bar Press ON SCREEN twice The on screen bar appears on the TV screen OPERATIONS ON DVD DECK cont 2 Select menu item Press lt gt to move the hightlight to GD ENTER e The following pop up window appears under the selected item then press Example ENGLISH is selected out of 4 audio languages recorded TITLE 1 CHAP 7 TOTAL 0 27 06 P time C orr OD xs 1 ENGLISH Select the audio language Press AV repeatedly to select the desired audio language then press ENTER e Each time you press the button the audio language changes To clear the on screen bar Press ON SCREEN NOTES Some audio languages are abbreviated in the pop up win
79. ed section at the end of the tape There may be some noise and sound disturbance at the point on the tape where the unit switches from SP to EP mode The Auto SP EP Timer feature is not available during Instant Timer Recording and the feature will not work properly on the following tapes T ST 30 T ST 60 T ST 90 and T ST 120 76 rN SUBSIDIARY SETTINGS cont The default setting is bold in the table below VIDEO STABILIZER When this function is set to ON you can automatically correct vertical ON vibration in the picture when playing back unstable recordings made on OFF another recorder NOTES When you finish viewing a tape be sure to set this function to OFF e Regardless of the setting this function has no effect during recording and during special effects playback The on screen display may jitter vertically when this function is set to ON To watch recordings with close caption set this function to OFF mg BLUE BACK When this function is set to ON the TV screen becomes all blue when ON receiving a channel not in use OFF NOTE When you want to receive an unstable channel with poor signals set this function to OFF 2ND AUDIO RECORD ON OFF e When this function is set to ON If a SAP program is received the SAP audio is recorded on both the normal and Hi Fi tracks The main audio is not recorded If a non SAP program
80. epeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up E Access the Main Menu screen Press SET UP 4 Access the Tuner Set screen Press AV to move the highlight bar arrow to TUNER SET then press ENTER or D MAIN MENU FUNCTION SET TUNER SET INITIAL SET PRESS em THEN ENTER PRESS SET UP TO END Perform Auto Channel Set Press AV to move the highlight bar arrow to AUTO CHANNEL SET then press ENTER or D You can automatically set the receivable channels in your area in the order of their frequencies When Auto Channel Set is complete SCAN COMPLETED appears on the TV screen I the scan was unsuccessful SCAN COMPLETED NO SIGNAL appears on screen Check the connections and start again TUNER SET BAND CATV AUTO CHANNEL SET MANUAL CHANNEL SET SELECT WITH A V ENTER PRESS SET UP TO END AUTO CHANNEL SET SCANNING PRESS SET UP TO END mnm Return to the normal screen Press SET UP EN 27 Manual Channel Set You can add the channels you want or delete the channels you do not want manually Hl Turn on the unit Press POWER 0 1 2 Select the VCR deck On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up
81. er with a built in Dolby Digital decoder STREAM PCM Select this when you connect the unit s DIGITAL AUDIO OUT connector to the digital input connector of an amplifier with a built in DTS Dolby Digital or MPEG multichannel decoder EN Z9 DOWN MIX DOLBY SURROUND STEREO Set to the appropriate mode according to your audio system when you play back a DVD VIDEO disc recorded with surround multichannel audio This setting affects only the analog audio output signal from the AUDIO OUTPUT connectors DVD when playing back a DVD VIDEO disc recorded with surround multichannel audio DOLBY SURROUND Select this when you enjoy multichannel surround audio by connecting the unit s analog AUDIO OUTPUT connector DVD to a surround decoder or an internal amplifier STEREO Select this when you enjoy conventional 2 channel stereo audio by connecting the unit s analog AUDIO OUTPUT connectors DVD to a stereo amplifier receiver or TV or when you dub audio of a DVD VIDEO disc recorded with surround audio to your MD cassette etc NOTE The DOWN MIX function does not work when the 3D Phonic function is activated pg 46 D RANGE COMPRESSION AUTO ON You can compress the dynamic range the difference between the loudest and quietest audio signals of the sound when listening to the sound at a low volume or at night This function is available with DVD VIDEO discs recorded with the Dolby Digital format Set
82. erate your product only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company If your product is intended to operate from battery power or other sources refer to the operating instructions 3 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 4 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product EN 3 5 Ventilation Slots and openings in the cabinet are provided for ventilation To ensure reliable operation of the product and to protect it from overheating these openings must not be blocked or covered e Do not block the openings by placing the product on a bed sofa rug or other similar surface e Do not place the product in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 6 Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer ANTENNA INSTALLATION INSTRUCTIONS 1 Outdoor Antenna Grounding If an outside antenna or cable system is
83. es at the beginning of each recording This function gives you quick access to any one of 9 index codes in either direction x B t N 4 4 E NOTE REMAIN 00 Before starting make sure the unit COUNT 1 23 45 is in the Stop mode Activate Index Search Press INDEX 444 or INDEX BP INDEX 1 or INDEX 1 is displayed on the TV screen and search begins in the corresponding direction To access index codes 2 through 9 press INDEX Ha a INDEX gt gt I repeatedly until the correct index number is displayed Example To locate the beginning of B from the current position press INDEX 14 9 twice To locate the beginning of D from the current position press INDEX gt l once Current position v Index number B C D E 2 l 1 2 3 A 144 When the specified index code is located playback begins automatically Instant ReView Simply by pressing a single button the unit power comes on rewinds and begins playback of the last timer recorded program If you have several programs recorded you can easily access any of them NOTE Before starting make sure that the unit is off and that the Timer mode is disengaged Activate Instant ReView Press evewa The unit power comes on and the unit searches for the index code indicating the start of the last timer recorded program Once it s found playback begins automatically T
84. esponding to the current status are displayed for 5 seconds After that the counter information and RECORD PAUSE if in the Record Pause mode remain on the screen Press ON SCREEN again to clear the display The RECORD PAUSE indication remains on the screen no REMOTE 0 0 c C 657 Tv O l z de 1 5 REPEAT JONSCREEA screen s 6 START STOP Do ec Very Oo S e I EAUX T 16 3 5 Phonie 2 TT 18 ave Buttons with a small dot on the left side of the name POWER 5 1 TV VCR TV VCR CH TV VOL MUTE can also be used to operate a JVC s TV after setting the TV VCR DVD switch to the left Q VCR Button r pg 28 33 TV VCR DVD switch r pg 18 Menu Button MENU rz pg 43 SP EP Button r pg 33 Top Menu Button TOP MENU c pg 43 Stop Time Button STOP r pg 36 On Screen Button ON SCREEN gt pg 12 48 Start Time Button START pg 36 Repeat Button REPEAT r pg 50 64 67 Zooming Button ZOOM c pg 45 Number Keys rz pg 27 33 64 Daily Button DAILY r pg 37 Reset Button C RESET r pg 35 Cancel Button CANCEL r pg 39 10 Button Play Button PLAY B r pg 28 42 Rewind Button REW lt lt r pg 28 29 4
85. from the TV 2 Connect the TV antenna cable to the VHF UHF IN connector on the rear panel of the unit 3 Connect the supplied RF cable between the VHF UHF OUT connector on the rear panel of the unit and the TV s antenna terminal 4 Connect the supplied audio video cable between the AUDIO VIDEO OUTPUT connectors on the rear panel of the unit and the TV s audio video input connectors Set your TV to AV mode For switching the TV s mode refer to the instruction manual of your television To obtain high quality pictures you can also use the S VIDEO connection or Component Video Connection DVD deck only I pg 15 16 4 Connect the unit to power source Plug the end of the AC power cord into an AC outlet This unit performs Plug amp Play Set automatically r pg 17 The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC outlet If AUTO and the channel indicator are displayed on the front display panel before the unit is powered on the clock and tuner channels are being set automatically Wait for the time to be displayed on the front display panel before turning on the unit S VIDEO Connection DVD deck only ATTENTION Be sure to connect the unit s VIDEO OUTPUT DVD VCR connector to the TV s VIDEO input connector Antenna or Cable Coaxial cable l
86. g playback Hl Access the on screen bar Press ON SCREEN twice The on screen bar appears on the TV screen e The currently selected item is highlighted DVD VIDEO TITLE 1 CHAP 7 TOTAL 0 27 06 2 Time amp orr CHAP gt 2 4 Ga vs Buin Select menu item Press lt D to move the hightlight to then press ENTER The pop up window appears under the selected item e The current setting appears TITLE 1 CHAP 7 TOTAL 0 27 06 P Time C CHP 9 2 c3 vs Eni A OFF V E Select the option Press AV to select the desired option then press ENTER e Each time you press AV the options change To clear the on screen bar Press ON SCREEN NOTE See the corresponding pages for details on each function Change the time information TW UT Audio L3 EZ You can change the time information in the on screen bar on the TV screen and the front display panel of the unit During playback or while stopped Hl Access the on screen bar Press ON SCREEN twice The on screen bar appears on the TV screen Select menu item Press lt D to move the hightlight to TIME then press ENTER e Each time you press ENTER the time information changes as follows Example During DVD playback gt GINS GSO UR UG IEEE Back to the beginning TIME Elapsed playing time of current chapter track REM Remaining time of current chapter track TOTAL
87. ile you have specified To display only the selected file then press ENTER To start slide show playback from that file press ENTER again Example To select 3 Press 3 Toselect14 Press 10 then 4 Toselect20 Press 10 then 10 Or press 10 twice then 0 To select 24 Press 10 10 then 4 To select 110 Press 10 ten times then 10 To select 150 Press 10 fourteen times then press 10 once NOTE You cannot select 150 even if you press 10 fifteen times then press 0 once EN 67 Repeat Playback You can repeat playback of the current group file or all groups While JPEG control display is on the TV 1 Select the mode Press REPEAT to select the desired repeat mode e Each time you press REPEAT the mode changes as follows GROUP ALL OFF No indication gt Back to the beginning GROUP All files of the current group are played back repeatedly ALL All files are played back repeatedly OFF No indication Start playback Press PLAY P To stop Repeat Playback press STOP I To cancel Repeat Playback press REPEAT repeatedly until the repeat mode display disappears on the TV screen You can also quit Repeat Playback in the following cases Press OPEN CLOSE 4 to open the disc tray Turn off the unit Each file is played back once To return to the JPEG control display Press STOP Bl Looming Press ZOOM during
88. instead of the PLAY P gt button To activate the PBC function when a PBC compatible Video CD disc is being played back without the PBC function press TOP MENU or MENU or press STOP IB press twice when RESUME is set to ON then press PLAY e EN 43 Locating a desired scene using the DVD menu DVD U Audio VIDEO Dn cD DVD VIDEO discs may have two types of the menus top menu and disc menu Top menu DVD discs generally have their own menus which show the disc contents These menus contain various items such as titles of a movie names of songs or artist information You can locate a desired scene by using the top menu displayed on the TV screen Press TOP MENU to access the top menu Disc menu DVD discs have the disc menu to select subtitle and audio language etc for each title Press MENU to access the disc menu 1 Access the DVD menu Press TOP MENU or MENU Example 2 Start playback Press AV lt gt to select a desired item then press ENTER It may be possible to select the desired item using the number keys depending on the disc NOTES e When appears on the TV screen in step 1 the disc does not have a top menu or disc menu Top menu or disc menu may not appear depending on the discs even if it is recorded in DVD VIDEO format and finalized In that case press STOP IB to display the total number of titles on a disc then press the appropriate number keys to select the de
89. isengage the Satellite Auto Recording mode press REC LINK The indicator goes off If the unit s power is off it is not possible to engage the Satellite Auto Recording mode e In step El if the amp indicator does not light but instead blinks quickly even though your DBS receiver s power is off Satellite Auto Recording will not work properly with that DBS receiver If this is the case perform Express Timer Programing r pg 36 to timer record a satellite program Some DBS receivers output signals even if the power is off Satellite Auto Recording is not possible with those DBS receivers e The amp indicator blinks while Satellite Auto Recording is in progress For timer programing of the DBS receiver refer to the instruction manual of the DBS receiver e Satellite Auto Recording is not possible if your DBS receiver does not have a timer e Pressing the units POWER button while Satellite Auto Recording is in progress turns off the unit s power and disengages the Satellite Auto Recording mode I there are more than one satellite programs you wish to record with Satellite Auto Recording it is not possible to set different tape speeds for each program Depending on the type of DBS receiver the unit may not record a slight portion of the beginning of the program or may record slightly longer than the actual length of the program If you engage the Satellite Auto Recording mode when the
90. l settings were made Auto Channel Set was performed Perform manual setting again 6 Even though Auto or Semiauto Clock Set has been performed the clock is incorrect e The clock setting data received from the host channel is incorrect Select a different host channel during Semiauto Clock Set r pg 25 or perform Manual Clock Set I gt pg 25 ATTENTION operate the unit as usual This unit contains microcomputers External electronic noise or interference could cause malfunctioning In such cases switch the unit off and unplug the AC power cord Then plug it in again and turn the unit on Take out the cassette After checking the cassette Tray Lock To lock the disc tray tray is locked To unlock tray You can lock the disc tray to prohibit the unwanted disc ejection by children While the unit is turned off press and hold lil then press amp on the unit LOCK appears on the front display panel and the disc While the unit is turned off press and hold lll then press amp on the unit UNLOCK appears on the display panel 8 6 EN PLAYBACK Q A Q What happens if the end of the tape is reached during playback or search The tape is automatically rewound to the beginning During search slow still and frame by frame playback can t hear any audio What s the problem This is normal Q Can the unit indefinitely remain in the still
91. les pg 78 3 The MP3 control display appears on the TV screen but no operation can be performed e No MP3 files or JPEG files are recorded to the disc or the disc is an unplayable disc such as CD ROM Replace the disc r pg 9 JPEG Playback DVD deck SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1 A disc cannot be played No JPEG files are recorded to the disc e JPEG files do not have the correct file extension in their file names JPEG files are not recorded in a format compliant with ISO 9660 Level 1 or 2 Replace the disc Add correct file extension jpg jpeg JPG JPEG or any uppercase and lowercase combination such as Jpg to their file names Replace the disc Record JPEG files using a compliant application 2 Not JPEG files but MP3 files are played back The FILE TYPE setting is set to AUDIO When both MP3 files and JPEG files are recorded to a disc set FILE TYPE to STILL PICTURE to play JPEC files pg 78 RECORDING VCR deck SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1 Recording cannot be started There is no cassette loaded or the cassette loaded has had its record safety tab removed Insert a cassette or using adhesive tape cover the hole where the tab was removed 2 TV broadcasts cannot be recorded e F 1 has been selected as the input mode Set to the desired channel
92. ls TIMER Clock reference Quartz Program capacity 1 year programmable timer 8 programs Memory backup time Approx 5 seconds ACCESSORIES Provided accessories RF cable Audio video cable Infrared remote control unit battery x 2 Specifications shown are for SP mode unless otherwise specified E amp O E Design and specifications subject to change without notice 88 EN A Playback 51 About Discs JPEG uma a ipa rre ied vet eats 65 62 Plaemg a Dise 9 Playable 5655 citet ep e ron s 7 Region Number 7 Unplayable Discs u ala assaka nato 7 Angle Selection iii 55 Audio Channel Selection 57 Audio Language Selection 56 Auto Channel Set 3 nee eR UTR eec 26 Chapter Search te eie 53 Check cancel and change programs 38 Child bock l aaa tette 80 Glocke eee Cere ERR tor eost 24 Component Video Connection 16 Connecting To A Dolby Digital Decoder or An Amplifier With A Built in DTS 73 D Digital Audio Dubbing 71 BANEN q at mrt retra 43 Dubbing from DVD to VCR 70 E EDITING DVD DECK Digital Au
93. m SO EN Others Settings SUBSIDIARY SETTINGS cont The default setting is bold in the table below m RESUME ON OFF When this function is set to ON you can use the resume function pg 45 ON You can start playback from the resume point of the placed disc OFF You cannot use the resume function NOTE This function is not available for Audio CDs and MP3 discs IM ON SCREEN GUIDE ON When this function is set to ON the unit can display on screen guide icons or characters which shows the conditions of the unit or OFF disc Child Lock e Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right You can disable the unit s operation B set the child Lock Press and hold POWER on the Remote for more than 10 seconds while the unit is turned on The unit turns off and CL appears on the front display panel To release the child lock press and hold POWER 0 1 on the Remote until the unit turns on NOTES e When the child lock function is in use keep the Remote out of the children s reach e Timer recording programs will be performed even if the child lock function activated Scan Mode Set DVD deck e Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right This unit supports the progressive scan system eg 480p as well as the conventional interlaced scan sy
94. n on the TV and select the AV mode e Slide the TV VCR DVD switch to the right O I DVD To set Parental Lock for the first time i Turn on the unit Press POWER 7 1 2 Select the DVD deck On the unit Press VCR DVD repeatedly so that the DVD indicator lights up On the Remote Press DVD so that the DVD indicator lights up OPERATIONS ON DVD DECK cont Access the DVD Set Up menu Press SET UP Press lt gt to select f OTHERS Access the PARENTAL LOCK menu Press AV repeatedly to move the hightlight to PARENTAL LOCK then press ENTER e The PARENTAL LOCK sub menu appears on the TV screen It is possible to access the PARENTAL LOCK menu only in the stop mode when a DVD disc is loaded on the unit Access the country code menu Press ENTER then press AV repeatedly to move the hightlight to COUNTRY CODE then press ENTER OTHERS RESUME Nd ON SCREEN GUIDE ON SELECT USE av 4P TO SELECT USE OK TO CONFIAM PDT mnm Select the country code Press AV repeatedly to move the hightlight to select PARENTAL LOCK the country code then press pur ENTER See Country Area Code List for Parental Lock r pg 60 upa e The hightlight moves to SET LEVEL Select the Level Press ENTE
95. nction allows you to get a simulated surround effect from your stereo system You can enjoy the vertical surround sound with your 2 channel stereo system 1 Access the selection menu Press 3D PHONIC during playback e The current setting appears on the right bottom corner of the TV screen 2 Select the mode Press 3D PHONIC repeatedly 3D PHONIC DRAMA Selected mode OPERATIONS ON DVD DECK cont Each time you press 3D PHONIC the setting changes as follows OFF ACTION DRAMA THEATER Back to the beginning OFF No effect ACTION Suitable for action movies and sports programs in which sounds dynamically move DRAMA Provides the natural and warm sound You can enjoy movies in a relaxed mood THEATER You can enjoy sound effects like in a major theater The selection menu disappears automatically if you do not change the selection for 5 seconds NOTES The 3D Phonic function works correctly only when playing back a DVD VIDEO disc recorded in the multi channel Digital format With other sources you cannot get any effect if you activate 3D Phonic function When playing back a DVD VIDEO disc recorded with the Dolby Digital that does not contain the rear signal you cannot get a correct 3D Phonic sound even if you activate 3D Phonic function The 3D Phonic function does not affect the Digital bitstream signal from the DIGITAL AUDIO OUT connector e When 3D Phonic func
96. ndhi Sangho Serbo Croatian Singhalese Slovak Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Wolof Xhosa Yoruba Zulu 24 N Clock Set Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right m c UC UC LJ 4 C5 Ce INITIAL SETTINGS cont Perform clock setting only if the clock has not been set correctly by the Plug amp Play setting Preparations Hl Turn on the unit Press POWER 0 1 Select the VCR deck On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up E Access the Main Menu screen Press SET UP 4 Access the Initial Set screen Press AV to move the MAIN MENU highlight bar arrow to INITIAL SET then press ENTER or D FUNCTION SET TUNER SET INITIAL SET PRESS emi THEN ENTER PRESS SET UP TO END H Access the Clock Set screen Press AV to move the INITIAL SET highlight bar arrow to CLOCK SET then press ENGLISH ENTER or D SELECT WITH A V ENTER PRESS SET UP TO END Semiauto Clock Set You can change the host channel D S T Dayligh
97. ng Express Timer Programing Make sure that the unit s built in clock is set properly Insert a cassette with the safety tab in place The unit will come on automatically Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right DAILY WEEKLY OPERATIONS ON VCR DECK cont Example To timer record the program from 8 00 PM to 10 00 PM on 24th December on channel 12 Hl Select the VCR deck On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up 2 Access the Program screen Press PROG If you re just starting out PROGRAM 1 appears PROGRAM 1 START PRESS SP EP 8 DAILY 9 WEEKLY THEN ENTER PRESS PROG TO END E Enter the program start time Press START to enter the time you want recording to start Press and hold START to move in 30 minute increments or press and release repeatedly to move 1 minute at a time PROGRAM 1 START STOP m PRESS SP EP 8 DAILY 9 WEEKLY THEN ENTER PRESS PROG TO END Un Enter the program stop time Press STOP to enter the time you want recording to stop Press and hold STOP to move in 30 minute increments press and release repeatedly to move 1 minute at a time Enter the program date Press DATE
98. not change until you select another mode e When you select EDIT to dub tapes be sure to select NORM after you finish dubbing the tapes SUPERIMPOSE ON OFF When this function is set to ON various operational indicators appear on the TV screen Messages appear in the selected language r pg 20 NOTES e When you use this unit as the source player for editing be sure to set SUPERIMPOSE to OFF before starting e During playback the operation mode indicators may be disturbed depending on the type of tape being used BI AUTO SP EP TIMER ON OFF When this function is set to ON the unit automatically switches to EP mode to allow complete recording if there is not enough tape to record the entire program while timer recording in SP mode For Example Recording a program of 140 minutes in length onto a 120 minute tape Approximately 110 minutes Approximately 30 minutes SP mode EP mode Total 140 minutes Make sure you set this function to ON before the timer recording starts NOTES If you have programed the unit to timer record 2 or more programs the second program and those thereafter may not fit on the tape if you set AUTO SP EP TIMER to ON In this case make sure the mode is not engaged then set the tape speed manually during timer programing In order to ensure that the recording fits on the tape this feature may leave a slight non record
99. notes on the package to confirm that it conforms to the Compact Disc specification Depending on the intentions of the author of the software recording conditions of DVD discs and Video CD discs may be restricted Since this unit plays back discs according to the intentions of the author of the software as indicated on the disc some functions may not operate as commanded e When switching from the first layer to the second layer of double layered DVD VIDEO discs the image and sound may be momentarily distorted This is not a malfunction EN Z Unplayable Discs The following types of discs cannot be played using this unit Do not attempt to play back any kind of disc that is damaged cracked warped or repaired with adhesive tape or discs in unusual shapes heart shaped octagonal or other forms If such discs are accidentally played back it may cause noise that can lead to speaker damage CD ROM discs including PHOTO CD DVD AUDIO discs e Super Audio CDs SACD e DVD RW discs recorded in VR format DVD RAM Discs which have a region number other than 1 Region Number The world is divided into 6 regions for DVD VIDEO discs DVD VIDEO discs are assigned a region number to indicate which region they may be played back in A disc cannot be played back on this unit unless the region number of the disc matches that of the unit The region number for this unit is 1 Only discs whose region number includes
100. nually as required Hl Turn on the unit Press POWER 0 1 Select the DVD deck On the unit Press VCR DVD repeatedly so that the DVD indicator lights up On the Remote Press DVD so that the DVD indicator lights up Access the DVD Set Up menu screen Press SET UP FY 2 Press lt gt to select A LANGUAGE AUDIO LANGUAGE ENGLISH ON SCREEN LANGUAGE ENGLISH Un Select the mode Press AV to move the BS hightlight to ON SCREEN M eae LANGUAGE then press orF ENTER Select the mode setting Press AV to select the desired setting then press ENTER m Return to the normal screen Press SET UP Siola C5 6 INITIAL SETTINGS cont Menu Audio Subtitle Language Set DVD deck only Some DVD discs contain the DVD menu display audio subtitle in the multiple languages With these discs you can set the default language as you like The procedure shows how to set MENU LANGUAGE on the DVD Set Up menu screen as an example Hl Turn on the unit Press POWER 0 1 2 Select the DVD deck On the unit Press VCR DVD repeatedly so that the DVD indicator lights up On the Remote Press DVD so that the DVD indicator lights up Access the DVD Set Up menu screen Press SET UP Press lt gt to select
101. o an audio amplifier for Hi Fi stereo sound reproduction To operate the unit with your TV using the S VIDEO connection set your TV to its AV mode You can also use the TV VCR button on the unit s Remote to set JVC TV to the AV mode For switching the TV s mode refer to the instruction manual of your television Only DVD picture is output from S VIDEO OUTPUT connector VCR picture is not output IG rN Component Video Connection DVD deck only ATTENTION Be sure to connect the unit s VIDEO OUTPUT DVD VCR connector to the TV s VIDEO input connector Antenna or Cable Coaxial cable 1 Flat feeder Matching transformer not supplied AUDIO OUTPUT VIDEO OUTPUT COMPONENT VIDEO OUT AC outlet AC power cord Br fg Back of unit lt VHF UHF IN Component Audio Video VHF UHF Video cable cable OUT not supplied supplied RF cable supplied v ov v To Component Video To 75 ohm Input connector Terminal TV INSTALLING YOUR NEW UNIT cont E To connect to a TV with component video input connectors Hl Connect the unit to TV 1 Connect the aerial unit and TV as per Basic Connection r pg 14 2 Connect the units COMPONENT VIDEO OUT connectors to th
102. o select the desired audio channel then press ENTER e Each time you press the button the audio channel changes To clear the on screen bar Press ON SCREEN EN D7 When using the AAMONITOR button Hl Access the menu Press A MONITOR e The following pop up window appears on the TV screen Example ST stereo is selected out of 3 audio channels recorded 2 Select the audio channel Press AV or A MONITOR repeatedly to select the desired audio channel e Each time you press the button the audio channel changes The pop up window disappears if no operation is done for about 5 seconds For Video CD ST L R Back to the beginning ST listen to normal stereo playback L To listen to L left audio channel only R To listen to R right audio channel only For SVCD ST 1 ST 2 L 1 R 1 L 2 R 2 Back to the beginning ST 1 ST 2 To listen to normal stereo playback of ST 1 or ST 2 channel To listen to the L left 1 or 2 audio channel L 1 L 2 R 1 R 2 To listen to the R right 1 or 2 audio channel 58 EN Parental Lock This function restricts playback of DVD VIDEO discs which contain violent and other scenes according to the level set by the user For example if a movie which includes violent scenes supports the parental lock feature such scenes which you do not want to let children view can be cut or replaced with other scenes Tur
103. o watch the first of the 3 programs press three times The unit searches and begins playback automatically You can access a program as far as 9 index codes away from the current tape position 06606960 EN 31 Next Function Memory The Next Function Memory tells the unit what to do after rewinding Before continuing make sure the unit is in the Stop mode a For Automatic Start Of Playback Press REW lt lt then press PLAY e within 2 seconds b For Automatic Power Off Press lt lt then press POWER 071 within 2 seconds c For Automatic Timer Standby Press REW 4 then press TIMER within 2 seconds d For Automatic Cassette Ejection After Tape Rewind Press lt lt then press EJECT 4 amp within 2 seconds Repeat Playback Your unit can automatically play back the whole tape 100 times repeatedly Start playback Press PLAY P gt 2 Activate Repeat Playback Press PLAY P gt and hold for over 5 seconds then release e The Play indicator P gt on the front display panel blinks slowly e After playing back a tape 100 times the unit stops automatically 3 Stop Repeat Playback Press STOP ll at any time e Pressing PLAY gt REW 44 FF gt or PAUSE IB also stops Repeat Playback 32 N CH
104. of the tape was reached during Satellite Auto Recording Load a cassette with the record safety tab intact Remove the cassette and cover the hole with adhesive tape or insert a cassette with the record safety tab intact The program may not have been recorded in its entirety Next time make sure you have enough time on the tape to record the entire program OTHER PROBLEMS EN 85 SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1 The image of TV broadcast appears distorted on the TV screen e The unit leaves turned on and the DVD deck is selected Turn off the unit or press VCR to select the VCR deck then press TV VCR so that the VCR indicator disappears from the front display panel 2 Whistling or howling is heard from the TV during camcorder recording The camcorder s microphone is too close to the TV The TV s volume is too high Position the camcorder so its microphone is away from the TV Turn the TV s volume down 3 When scanning channels some of them are skipped over Those channels have been designated to be skipped If you need the skipped channels restore them I pg 27 4 The channel cannot be changed Recording is in progress Press PAUSE II to pause the recording change channels then press PLAY P gt to resume recording 5 Channel settings that were made manually seem to have changed or disappeared After the manua
105. p E Access the Main Menu screen Press SET UP 4 Access the Function Set screen Press AV to move the highlight bar arrow to FUNCTION SET then press ENTER or D MAIN MENU FUNCTION SET TUNER SET INITIAL SET PRESS A Y THEN ENTER PRESS SET UP TO END Select mode Press AV to move the highlight bar arrow to the item you want to change FUNCTION PREVIOUS PAGE PICTURE CONTROL NORM AUDIO MONITOR SUPERIMPOSE ON AUTO POWER OFF AUTO TIMER OFF VIDEO STARILIZER OFF BLUE BACK ON 2ND AUDIO RECORD OFF NEXT PAGE SELECT WITH 4 7 ENTER PRESS SET UP TO END SELECT WITH A V ENTER PRESS SET UP TO END m Select the mode setting Press ENTER or gt gt Return to the normal screen Press SET UP EN 7 2 The default setting is bold in the table below i PICTURE CONTROL NORM EDIT SOFT SHARP This feature helps you to adjust the playback picture quality according to your preference Normally select NORM NORM Picture quality is adjusted automatically EDIT Minimizes picture degradation during editing recording and playback SOFT Reduces image coarseness when viewing overplayed tapes containing a lot of noise SHARP Clearer sharper edged picture when viewing images with lots of flat same colored surfaces such as cartoons NOTES e When you select EDIT SOFT or SHARP the selected mode will
106. pages 3 4 DSS is an official trademark of DIRECTV Inc a unit of GM Hughes Electronics DISH Network is a trademark of Echostar Communications Corporation gapo 2 0 DIGITAL OUT DIGITAL VHS SQPB HEAL e Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories e DTS DTS 2 0 Digital Out are trademarks of Digital Theater Systems Inc e Cassettes marked VHS or S VHS can be used with this unit However S VHS recording is not possible with this model e This model is equipped with SQPB S VHS QUASI PLAYBACK that makes it possible to play back S VHS recordings with regular VHS resolution e HQ VHS is compatible with existing VHS equipment e This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing users only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited When the equipment is installed in a cabinet or a shelf make sure that it has sufficient space on all sides to allow for ventilation 10 cm or more on both sides on top and at the rear When discarding
107. picture is unclear or no picture appears USE CLEANING CASSETTE appears on the screen only with SUPERIMPOSE set to ON F pg 75 NOTE The heads get dirty in the following cases in an environment prone to extreme temperature or humidity in a dusty environment e flaw dirt or mold on video tapes continuous usage for a long time OPERATIONS ON VCR DECK Hl Load a cassette Make sure the window side is up the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit Do not apply too much pressure when inserting If the record safety tab has been removed playback begins automatically Although the DVD deck is selected the VCR deck is selected automatically if the DVD deck is in stop mode The unit s power comes on automatically and the counter is reset to 0 00 00 Select the VCR deck On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up E Find the program start point If the tape is advanced past the start point press REW 44 4 To go forward press FF PP 4 Start playback Press PLAY P gt Stop playback Press STOP Bl Then press EJECT 4 on the VCR deck to remove the cassette Usable cassettes Full Size VHS T 30 ST 30 T 60 ST 60 T90 T 120 ST 120 T 160 ST 160 ST 210 Compa
108. r details see Resume Function on page 45 NOTE When you press OPEN CLOSE 4 while the unit is turned off the unit s power comes on and the disc tray opens automatically Playback Features Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right Playback Control PBC Function Locating a desired scene using the menu of the Video CD with PBC DVD W Vitleo Audio Some Video CD discs supports the PBC function PBC is an abbreviation of PlayBack Control A Video CD disc recorded with PBC has its own menus such as a list of the songs of the disc You can locate a specific scene by using the menu 1 Access the PBC menu In stop mode Press PLAY P gt Depending a disc PBC menu may automatically 2 appear on the TV screen by simply loading a disc on the unit Pbc appears on the front display panel Example 2 Start playback Press the appropriate number keys e The unit starts playback of the selected item When NEXT or PREVIOUS appears on the TV screen Pressing SKIP gt gt advances to the next page Pressing SKIP 14444 returns to the previous page You can return to the menu by pressing RETURN The method of the operation is different depending on the disc NOTES If you want to playback a PBC compatible Video CD disc without activating the PBC function start playback by using the number keys
109. rwise the unit will start recording when the connected satellite program which is timer programed on your appliance s power is turned on external DBS receiver Connect a DBS receiver to the e Satellite Auto Recording and timer recording cannot be unit s AUDIO VIDEO input F 1 connector and program done at the same time the timer on the DBS receiver The unit starts or stops recording by the signals input from the DBS receiver Before performing the following steps After recording the unit s power shuts off automatically Make sure the DBS receiver is comhected to the unit s You can also connect the cable box if it has a timer AUDIO VIDEO input F 1 connector e Program the timer on the DBS receiver Insert a cassette with the safety tab in place e Slide the TV VCR DVD switch to the right Hl Select the VCR deck On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up 2 Set the tape speed Press SP EP E Engage the Satellite Auto Recording mode Press and hold REC LINK for about 2 seconds The and indicators light up and the unit turns off automatically OJN NOTES Operation on the DVD deck are not possible when the Automatic Satellite Program Recording mode is engaged or timer recording is in progress To d
110. s and Futuna Islands Samoa Yemen Mayotte Yugoslavia South Africa Zambia Zaire Zimbabwe 62 rN About MP3 Disc This unit can playback CD discs recorded by the MP3 format we refer to those discs as MP3 discs in this manual Operations for MP3 discs are similar to those for Audio CD discs though there are some restrictions and differences What is MP3 MP3 is the abbreviation of MPEG1 Audio Layer 3 MPEG Audio is a compression specification that compresses the audio portion only This image compression method is used in DVD or Video CD etc The audio data has been compressed into about 1 10 On an MP3 disc each material song is recorded on each Track file which usually belongs to a Group folder 2 Track A mp3 Group 1 Track B mp3 Track C mp3 MP3 disc Track D mp3 Track E mp3 Track F mp3 a This unit can recognize up to 99 Groups and up to 150 Tracks per Group If a disc includes more than the Tracks above limit the unit stops detecting Tracks when the number of detected Tracks reaches the limit and ignores the subsequent Tracks The unit also ignores any non MP3 file in the disc NOTES for making a private MP3 disc using a CD R CD RW disc e Select ISO9660 as the disc format e Finalize the disc OPERATIONS ON DVD DECK cont NOTES e Because of the disc characteristics or recording condition some discs may not be played back or it takes time to
111. s on another recorder 2 When using your unit as the recording deck connect its AUDIO VIDEO input connectors to the audio video output connectors on another recorder 2 Select the VCR deck On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights up E Set the input mode of recording deck With this video unit press AUX number key 0 and or CH to select F 1 e When using another recorder as the recording deck refer to its instruction manual 4 Set the edit mode See PICTURE CONTROL on page 75 Engage the Record Pause mode of the recording deck Locate the point where you start recording then engage the Record Pause mode Start the source player Engage the Play mode of the source player Start the recording deck Engage the Record mode of the recording deck NOTES All necessary cables can be obtained from your dealer e When you select EDIT to dub tapes in step be sure to select NORM after you finish dubbing the tapes e When you use this unit as the source player for editing be sure to set SUPERIMPOSE to OFF before starting I3 pg 75 70 x Dubbing from DVD to VCR e Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right CCD TV
112. s the exact elapsed time as the tape runs You can check the exact time of a recording or playback Tape Remaining Time Press DISPLAY until the time remaining on the tape appears e The front display panel shows the tape remaining time with blinking By pressing the DISPLAY button you can change display to show the channel position clock time counter reading or tape remaining time Channel position is not displayed during playback NOTES When you press ON SCREEN the on screen display appears on the TV screen for 5 seconds then the displays other than the counter disappears To clear the counter display press ON SCREEN Depending on the type of tape being used the tape remaining time reading may not appear right away or is not correct may sometimes appear with blinking or the display may blink on occasion Second Audio Recording This unit s built in MTS decoder enables reception of Multichannel TV Sound broadcast To record a SAP program received set 2 ND AUDIO RECORD to ON t pg 76 NOTE When the channel is changed on the unit e The STEREO indicator appears on the screen for about 5 seconds if the program is a stereo broadcast e The SAP indicator appears on the screen for about 5 seconds if the program is a SAP broadcast e Both indicators appear when a stereo program is accompanied by SAP sound 36 EN Express Timer Programing Before performi
113. select P OTHERS e Each time you press the button the setup menus change as follows OTHERS SCREEN GUIDE SELECT 2 USE SELECT USE CONFIRM 92 TO EXT PRESS ISET UP LANGUAGE PICTURE gt AUDIO OTHERS Back to the beginning 4 Select the mode Press AV to move the hightlight to RESUME then press ENTER H Select the mode setting Press AV to select ON then press ENTER mnm Return to the normal screen Press SET UP 78 EN Picture Settings SUBSIDIARY SETTINGS cont The default setting is bold in the table below mg MONITOR TYPE You can select the monitor type depending the TV used when you play back 16 9 DVD VIDEO discs recorded for wide screen TVs For more details refer to 4 3 LB Monitor Set DVD deck r pg 18 4 3 PS PICTURE SOURCE You can obtain optimal picture quality by selecting whether the content on the AUTO disc is processed by field video source or by frame film source FILM Normally set to AUTO VIDEO AUTO Used to play back a disc containing both video and film source materials This unit recognizes the picture type film or video source of the current disc according to the disc information FILM Suitable for playing back a film or progressive source disc VIDEO Suitable for playing back a video source disc with relatively a few moments e If
114. sired title OPERATIONS ON DVD DECK cont Locating the start point of the item or skip the item DVD 8 Video Audio Press SKIP 14444 SKIP gt during playback Example To locate the beginning of item B from the current position press SKIP 9 4 twice To locate the beginning of item D from the current position press SKIP gt once Current position 2 l 1 2 3 lt 4 The number you press the button e When the specified item is located playback begins automatically NOTE When you press SKIP 14444 or SKIP gt gt the counter display may appear instead of title number chapter number depending on the discs Variable Speed Search DVD Video VIDEO Mu During playback press FF for forward variable speed search or REW lt lt for reverse variable speed search The more times you press the faster the playback picture moves To resume normal playback press PLAY We OR During playback press and hold SKIP gt for forward search or press and hold SKIP 444 for reverse search While you press and hold the button the image is played back at 5x speed To resume normal playback release SKIP 14444 or SKIP gt NOTES e Actual speed may be different from that displayed on the TV screen depending on the discs Playback sound is not heard in any variable speed sear
115. ssive Mode Indicator r pg 80 O Timer Indicator VCR deck only r pg 37 Satellite Auto Recording Indicator VCR deck only r pg 41 12 ON SCREEN DISPLAY VCR deck INDEX cont If you press ON SCREEN on the Remote when SUPERIMPOSE is set to ON r pg 75 various operational indicators appear on the TV screen For On screen display for DVD deck refer to Using the on screen bar r pg 48 12 CH 125 1 10 SUN 12 00 AM STEREO 2 9 8 3 4 INDEX 1 7 NORM REMAIN 10 00 5 COUNT 1 23 45 6 Operation Mode Indicators Tape Speed SP EP Tape Position Indicator The tape position indicator appears on the TV screen when you press REW lt lt or FF gt gt from the Stop mode or perform an Index Search F pg 30 The position of I in relation to B beginning or E end shows you where you are on the tape NOTE Depending on the type of tape being used the tape position indicator may not appear correctly B 4 N 4 4 E COUNT 0 33 27 Beginning End Index number r pg 30 Q Tape Remaining Time Indicator r pg 35 Q Counter Display Audio Mode Display c pg 32 Q SAP Indicator r pg 35 Stereo Program Indicator r pg 35 Day Clock Display Channel Position Number Auxiliary Input Indicator F 1 D Cassette Loaded Mark To recall an indication Press ON SCREEN All indications corr
116. start playback The unit does not support packet writing discs If there are any Tracks files which are stored on a disc directly and do not belong to any Group directory the unit recognized them as belonging to an independent Group The unit plays back Groups Tracks on an MP3 disc in the alphabetical order For example if there are three title Groups one two and three on a disc the playback order is three then two Tracks in a Group are played back in the same way e Therefore an MP3 disc on the market may be played back in the different order from the order printed on its sleeve MP3 control display The MP3 control display appears on the TV screen and playback starts when an MP3 disc is loaded Total track number in current group Ge Total group number on Current track disc number Hail Indian summer Rain Shower Snow Thunder Typhoon Wind Winter sky Total track number on disc Current group Current track number Current group Elapsed playing time of current track Elapsed playing time is only shown during playback MP3 Playback You can search and play back desired groups and tracks using the MP3 control display Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right
117. stem eg 4801 If your TV equipped with component video connectors supports the progressive video input you can enjoy a high quality picture by setting the progressive scan mode to active Refer also to the instruction manuals supplied with your TV If your TV equipped with component video connectors does not support the progressive video input do not change the scan mode to the PROGRESSIVE 480p and 480i indicate the number of scanning lines and scanning format of an image signal 480p indicates 480 scanning lines with progressive format 480i indicates 480 scanning lines with interlaced format Hl Switch the mode During playback or while stopped press and hold PROGRESSIVE SCAN on the unit or DVD on the Remote for more than 3 seconds to change the scan mode between Progressive and Interlace mode When the Progressive scan mode is selected the Progressive mode indicator P lights up on the front display panel TROUBLESHOOTING EN OL Before requesting service for a problem use this chart and see if you can repair the trouble yourself Small problems are often easily corrected and this can save you the trouble of sending your unit off for repair POWER SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1 No power is supplied to the unit e The AC power cord is disconnected Connect the AC power cord 2 The Remote won t function e The batteries are discharged Replace the d
118. stralia Aruba Azerbaijan Bosnia and Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulgaria Bahrain Burundi Benin Bermuda Brunei Darussalam Bolivia Brazil Bahamas Bhutan Bouvet Island Botswana Belarus Belize Canada Cocos Keeling Islands Central African Republic Congo Switzerland C te d Ivoire Cook Islands Chile Cameroon China Colombia Costa Rica Cuba Cape Verde Christmas Island Cyprus Czech Republic Germany Djibouti Denmark Dominica Dominican Republic Algeria Ecuador Estonia Egypt Western Sahara Eritrea Spain Ethiopia Finland Fiji Falkland Islands Malvinas Micronesia Federated States of Faroe Islands France France Metropolitan Gabon United Kingdom Grenada Georgia French Guiana Ghana Gibraltar Greenland Gambia Guinea Guadeloupe Equatorial Guinea Greece South Georgia and the South Sandwich Islands Guatemala Guam Guinea Bissau Guyana Hong Kong Heard Island and McDonald Islands Honduras Croatia Haiti Hungary Indonesia Ireland Israel India British Indian Ocean Territory Iraq Iran Islamic Republic of Iceland Italy Jamaica Jordan Japan Kenya Kyrgyzstan Cambodia Kiribati Comoros Saint Kitts and Nevis Korea Democratic People s Republic of Korea Republic of Kuwait Cayman Islands Kazakhstan Lao People s Democratic Republic Lebanon EN 61 NCAV
119. subtitle language is not recorded Angle Selection DVD U Audio VIDEO cD You can enjoy a variety of scene angles if the DVD VIDEO disc contains multi angle parts where multiple cameras were used to shoot the same scene from different angles If the disc contains multi angle parts amp amp appears on the TV screen at the beginning of the multi angle part when ON SCREEN GUIDE is set to ON During playback When using the on screen bar Hl Access the on screen bar Press ON SCREEN twice The on screen bar appears on the TV screen Select menu item Press lt D to move the hightlight to amp q ENTER The following pop up window appears under the selected item then press Example The first view angle is selected out of 3 view angles recorded DVD VIDEO TITLE 1 CHAP 7 TOTAL 0 27 06 gt TIME eorr CHAP 3 1 LAs Select the view angle Press AV repeatedly to select the desired view angle then press ENTER e Each time you press the button the angle of the scene changes To clear the on screen bar Press ON SCREEN NOTE When appears on the TV screen in step El the current scene is not recorded from multiple angles EN 55 When using the ANGLE button 1 Access the menu Press ANGLE e The following pop up window appears on the TV screen Example The first view angle is select
120. t Saving Time time zone setting manually First follow steps to in Preparations I pg 24 then go to the following steps NOTE The time set previously will be erased when AUTO CLOCK HOST CH D S T or TIME ZONE setting is changed set auto crock to on Press ENTER or D repeatedly CLOCK SET to move the highlight bar to TIME DATE WEAR AUTO CLOCK then press AM 04 AV so that ON is selected Ci PAUTO CATV S T TIMEZONE AUTO PRESS em THEN ENTER PRESS SET UP TO END Select the host channel You can either select AUTO or enter a PBS channel number Press ENTER or gt to move the highlight bar to HOST CH then press AV repeatedly until AUTO or the desired PBS channel number is selected NOTE Some PBS channels do not transmit clock setting data E Select the D S T mode Press ENTER or D to move the highlight bar to D S T then press AV repeatedly until the desired setting is selected AUTO Select if you want to adjust your VCR s clock automatically by the incoming signal from the host channel Be sure to select the correct time zone manually in step El ON Adjustment will be made by the built in clock itself OFF Select when Daylight Saving Time does not apply to you 4 Select the time zone Press ENTER or D to move the highlight bar to TIME ZONE then press AV repeatedly until A
121. t display panel won t stop blinking The timer is engaged but there s no cassette loaded e The loaded cassette has had its record safety tab removed Load a cassette with the record safety tab intact Remove the cassette and cover the hole with adhesive tape or insert a cassette with the record safety tab intact 4 and D gt on the front display panel won t stop blinking The end of the tape was reached during timer recording The program may not have been recorded in its entirety Next time make sure you have enough time on the tape to record the entire program 5 blinks for 10 seconds and the Timer mode is disengaged TIMER has been pressed when there no programs in memory or the timer record information has been programed incorrectly Check the programed data and re program as necessary then press TIMER again 6 O and D gt on the front display panel won t stop blinking The end of the tape was reached during Instant Timer Recording The program may not have been recorded in its entirety Next time make sure you have enough time on the tape to record the entire program 7 QO and D gt on the front display panel won t stop blinking e The Satellite Auto Recording mode is engaged but there is no cassette loaded e The loaded cassette has had its record safety tab removed The end
122. te and year in the same way HOSTCH AUTO CATV e Holding AV changes the time Do sir AUTO in 30 minute intervals or 7 PRESS THEN ENTER changes the date in 15 day PRESS SET UP TO END intervals FP Select D S T mode Press ENTER or D to move the highlight bar to D S T ie DAE DAR then press AV to select the 1 00AM 12 24 desired setting AUTO CLOCK OFF CLOCK SET STIME 4 DATE YEAR AUTO CLOCK ON CLOCK SET ON Adjustment will be PRESS ENTER made by the built in PRESS SET UP TO END clock itself OFF Select when Daylight Saving Time does not apply to you E Start clock Press SET UP and normal screen appears To make corrections any time during the process Press ENTER or D repeatedly until the item you want to change blinks then press AV 26 EN Tuner Set e Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right INFORMATION The unit selects the correct band TV or CATV automatically during Auto Channel Set The selected band will be displayed on the right side of BAND on the Tuner Set screen INITIAL SETTINGS cont Auto Channel Set Perform Auto Channel Set only if channels have not been set correctly by the Plug amp Play setting i Turn on the unit Press POWER 0 1 2 Select the VCR deck On the unit Press VCR DVD r
123. the product exhibits a distinct change in performance this indicates a need for service 3 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or which have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 4 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in safe operating condition HOW TO USE THIS INSTRUCTION MANUAL All major sections and subsections are listed in the Table Of Contents on page 6 Use this when searching for information on a specific procedure or feature e The Index on pages 10 13 lists frequently used terms the number of the page on which they are used or explained in the manual This section also illustrates the controls and connections on the front and rear panel the front display panel and the remote control The gt mark signals a reference to another page for instructions or related information e Operation buttons necessary for the various procedures are clearly indicated through the use of illustrations at the beginning of each major section BEFORE YOU INSTALL YOUR NEW UNIT please read the sections literature listed below e CAUTIONS on page 2 e IMPORTANT PRODUCT SAFETY INSTRUCTIONS on
124. there is no need to perform Clock Set gt pg 24 and Tuner Set F pg 26 If however you want to add or delete channels refer to Manual Channel Set CF pg 27 NS 2 Z I L I LLLI During Initial Auto Clock Set During Auto Channel Set Plug amp Play Completed AUTO blinks The channel numbers are displayed as they are The current time is displayed scanned and set f an incorrect clock time or appears on the front display panel see What to do if Plug amp Play setting failed below INFORMATION e If AUTO CLOCK is set to ON I pg 25 the clock will be adjusted automatically by the host channel every hour except 11 00 PM midnight 1 00 AM and 2 00 AM using the incoming PBS channel clock setting data This automatic clock adjustment can only be performed when the unit is turned off The clock will be adjusted just on these hours on the time displayed on the front display panel not on the actual real time The default setting of AUTO CLOCK is ON r pg 25 e I the memory backup fails because a power outage occurs or because the AC power cord is unplugged Plug amp Play will be performed when power is restored to the unit What to do if Plug amp Play setting failed If an incorrect time is displayed the front display panel you may be receiving the clock setting data of a PBS channel from an adjacent time zone or
125. tion is activated Down Mix and D Range Compression functions are disabled I pg 79 VFP function Adjusting the picture quality DVD Video icy VIDEO The VFP Video Fine Processor function enables to adjust the picture character according to the type of programing picture tone or personal preference NOTE Before you start operation The VFP setting screen disappears if no operations are done for more than about 10 seconds If the setting screen disappears before you finish start from step 1 again 1 Access the VFP setting menu EN 47 4 Select the parameter Press AV repeatedly to select a parameter you want to adjust then press ENTER e Adjust gradually and confirm picture appearance results are as preferred Press DVD PICTURE during playback The current setting appears on the TV screen TINT SHARPNESS 3 2 Select the VFP mode Press lt D repeatedly e Each time you press lt gt the VFP mode changes as follows NORMAL CINEMA USER 1 USER 2 Back to the beginning NORMAL Select this normally CINEMA Suitable for movie USER 1 You can adjust parameters that affect picture USER 2 appearance and store settings Go to step 3 NOTE You cannot adjust the parameters of NORMAL and CINEMA To adjust picture appearance manually 3 Access USER menu Press lt D repeatedly to select USER 1 or USER 2 SHARPNESS
126. tions CAUTIONS This unit has a dynamic range of more than 80 dB with regards Connect the coaxial cable between the unit and the to its Hi Fi audio capability It is recommended that you check Dolby Digital decoder or amplifier with a built in DTS the maximum level if you are going to listen to the Hi Fi audio signals through a stereo amplifier A sudden surge in the input NOTES level to the speakers may damage them e For Dolby digital sound set DIGITAL AUDIO OUTPUT to Some speakers and televisions are specially shielded to DOLBY DIGITAL PCM pg 78 prevent television interference If both are of the non shielded For DTS sound set DIGITAL AUDIO OUTPUT to STREAM type do not place the speakers adjacent to the TV set as this PCM CF pg 78 can adversely affect the video playback picture Set VCR deck Turn on the TV and select the AV mode e Slide the TV VCR DVD switch to the right Ae Sout CD 2 8 CO 5 D CO e SUBSIDIARY SETTINGS You can change various mode settings on the Function Set screen by following the procedure described below For each mode setting see pages 75 to 76 Hl Turn on the unit Press POWER 0 1 Select the VCR deck On the unit Press VCR DVD repeatedly so that the VCR indicator lights up On the Remote Press VCR so that the VCR indicator lights u
127. to play back it the following Parental Lock screen appears on the TV screen asking you whether you want the Parental Lock to be temporarily released or not 1 Access the password screen Place the disc in the disc ee tray e If the disc rated higher than the s selected level the following screen appears Press A hightlight to TEMPORARY RELEASE then press ENTER If you select NOT RELEASE you cannot play back that disc Enter the password Press the appropriate number keys to enter 4 digit password then press ENTER f you enter the wrong password WRONG RETRY appears on the TV screen Enter the correct password If you enter the correct password the Parental lock is released and the unit starts playback NOTES When you enter the wrong password more than 3 times in step above the highlight moves to NOT RELEASE automatically and AV do not work In such a case press ENTER then press OPEN CLOSE 4 to remove the disc If you forget your password enter 8888 in step Hl PARENTAL LOCK to move the EATS 4 PASSWORD PRESS 0 9 KEY ENTER 60 Country Area Code List for Parental Lock OPERATIONS ON DVD DECK cont Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Au
128. to the appropriate mode according to the number of channels recorded AUTO Audio is played back with channels other than Dolby Digital channel 1 or 2 compressed ON Audio is played back with all channel compressed NOTES e This function works only when playing back a disc recorded with Dolby Digital format The setting is not effective for other discs e This function does not work when the 3D Phonic function is activated I pg 46 Output Playback discs STREAM PCM DOLBY DIGITAL PCM PCM ONLY DVD VIDEO with 48 kHz 16 20 24 bit linear PCM 48 kHz 16 bit linear PCM DVD VIDEO with DTS DTS bitstream 44 1 kHz 16 bit stereo linear PCM DVD VIDEO with Dolby Dolby Digital bitstream 48 kHz 16 bit stereo linear Digital PCM Audio CD Video CD 44 1 kHz 16 bit stereo linear PCM Audio CD with DTS DTS bitstream 44 1 kHz 16 bit stereo linear PCM MP3 disc Linear PCM NOTES e The unit is not equipped with the DTS 5 1 channel decoding function e When you play back a DVD VIDEO or Audio CD disc with DTS use a DTS decoder to get correct signals from your speakers Never use the unit s analog output connectors which output incorrect signals that may damage your speakers If you connect the analog outputs and digital outputs simultaneously be sure to select the source of the amplifier correctly or set the level control of the amplifier connected to the analog outputs to minimu

JVC HR-XVC23U User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents