Home

JVC HR-J790EU User's Manual

Contents

1. When the tape is not running Rewind fast forward at high speed Press lt 4 lt 4 or gt gt OR Turn the JOG dial quickly to the left or right Eject the cassette Press W amp You can also eject the cassette when the recorder is turned off Turn off the recorder Press O I ATTENTION In the search still slow motion or frame by frame playback mode the picture will be distorted the noise bars will appear there will be a loss of color with an LP recorded tape Playback Features Adjusting tracking condition Automatic tracking adjustment When a new cassette is loaded the recorder enters the automatic tracking mode Manual tracking adjustment If automatic tracking cannot eliminate noises well during playback adjust the tracking manually El Press HM during playback to activate manual tracking FA Press PR or to eliminate the noises Press it briefly for a fine adjustment or press and hold for a coarse adjustment Press HM again to reactivate automatic tracking Selecting Soundtrack Your recorder is capable of recording three soundtracks HIFI L I HIFI lt i R and NORM and plays back the one you select Pressing AUDIO changes the soundtrack as follows HIFIL 2 R For Hi Fi stereo tapes HIFI L For main audio of Bilingual tapes HIFI 4l R For sub audio of Bilingual tapes NORM For audio dubbed tapes HI FI NORM For audio dubbed tapes NOTE Set
2. 3 Leave the satellite receiver s power on Express Timer Programming El Press PROG to access the SHOWVIEW screen then press START The program screen appears EA Press START STOP DATE or T PR repeatedly to enter the start time TART stop stop time date or channel Press and hold START or STOP to SP VPS PDC OFF increase the time in 30 minute intervals DATE TV PROG To set the tape speed press SP LP To set the VPS PDC mode press VPS PDC To timer record daily Monday Friday or weekly serials press DAILY or WEEKLY Pressing the button again makes the DAILY or WEEKLY display disappear Press OK or PROG Press The recorder turns off automatically and is displayed on the display panel Elie 10 SAT PROG EXIT To timer record a satellite broadcast using Express Timer Programming Perform Satellite Receiver Control Set 5 2 Perform steps Ml B In step A press the number key 0 to change TV PROG to SAT Then press PR to enter the channel position for the satellite broadcast You cannot set VPS PDC to ON 3 Leave the satellite receiver s power on VPS PDC Recording Now available from some TV stations PDC Programme Delivery Control and VPS Video Programme System are service designed to assure safe accurate timer rec
3. or SAT e or when the recorder is in the timer recording standby mode e or in the Automatic Satellite Programme Recording mode e or when the recorder s power is turned off after timer recording or ITR Instant Timer Recording Wi L 2 SELECT A V DECODER SAT Select the appropriate mode depending on the type of unit connected to the L 2 IN DECODER connector of the recorder AN To use the recorder as the recording deck with the player connected to the L 2 IN DECODER connector or to use the satellite receiver connected to the L 2 IN DECODER connector DECODER To use a decoder connected to the L 2 IN DECODER connector When you select a country in Central or Eastern Europe for country setting you cannot use a decoder with this recorder SAT To view a satellite programme with the TV set while the recorder is turned off When the recorder is in stop or recording mode press TV VCR to turn off the VCR indicator on the display panel If you turn on the recorder when the satellite receiver s power is off nothing appears on the screen In this case turn on the satellite receiver or set the TV to its TV mode or press TV VCR to set the recorder to the video mode E COLOUR SYSTEM PAL NTSC MESECAM You can play back PAL NTSC and MESECAM tapes or record PAL and SECAM signals on this recorder Select the appropriate colour system SECAM signals will be recorded as MESECAM on this recorder MESECA
4. water Also DO NOT place any containers filled with water or liquids such as cosmetics or medicines flower vases potted plants cups etc on top of this unit 7 DO NOT place any naked flame sources such as lighted candles on the apparatus 8 AVOID violent shocks to the recorder during transport uw MOISTURE CONDENSATION Moisture in the air will condense on the recorder when you move it from a cold place to a warm place or under extremely humid conditions just as water droplets form on the surface of a glass filled with cold liquid Moisture condensation on the head drum will cause damage to the tape In conditions where condensation may occur keep the recorder s power turned on for a few hours to let the moisture dry How to use the remote control Before use insert the batteries in the correct directions as indicated under the battery cover The remote control can operate most of your recorder s functions as well as basic functions of JVC TV sets Point the remote control toward the receiving window on the recorder The maximum operating distance of the remote control is about 8m To operate your JVC TV while holding down TV press the corresponding button TV VCR TV PR TV 1 TV Volume 4 3 TV Muting NOTE If the remote control does not work properly remove its batteries wait for a few seconds replace the batteries and then try again Video heads cleaning The heads get
5. 00 gt 22 00 appears sP VPS PDC OFF Make sure the channel position number DATE TV PROG you wish to record is displayed if not ae Alo see SHOWViEW System Setup F 8 and set the Guide Program number correctly If the number you entered is invalid ERROR appears on the screen Press X and input a valid SHOWVIEW number If the GUIDE PROG SET screen appears set the Guide Program number To set the Guide Program number for the GUIDEPROG TV PROG satellite broadcast station press the 2 EE number key 0 to change TV PROG 5 to SAT Press AV to input the channel position number on which your recorder o o OSAT or satellite receiver receives that station Then press OK or gt gt to set the Guide Program number The SHOWVIEW Program screen appears To set the tape speed press SP LP To set the VPS PDC mode press VPS PDC To change the stop time press STOP To timer record daily Monday Friday or weekly serials press DAILY or WEEKLY Pressing the button again makes the DAILY or WEEKLY display disappear El Press OK or PROG El Press The recorder turns off automatically and is displayed on the display panel CB 0K GUIDE PROG SET To timer record a satellite broadcast using the SHOWVIEW system Perform Satellite Receiver Control Set 5 2 Perform steps Hl B In step A you cannot set VPS PDC to ON
6. FI NORM Audio Dubbing stops automatically when the counter reaches 0 00 00 and the recorder enters the Play mode Check the counter reading on the screen before dubbing Audio Dubbing is also possible using the rear panel L 1 IN OUT or L 2 IN DECODER connector When using these 21 pin SCART connectors be sure to select the correct input mode L 1 or L 2 in step A Audio Dubbing is not possible with cassettes whose record safety tab has been removed When playing back an audio dubbed tape press AUDIO to select the soundtrack you wish to hear F 6 Selecting Soundtrack f system Connections NOTE When you select a country in Central or Eastern Europe for country setting you cannot use decoder with this recorder Connecting to a satellite receiver Connect the decoder to the satellite receiver s connector if you have a decoder L 1 IN OUT connector to TV s connector and L 2 IN DECODER connector to the satellite receiver s connector Then connect the satellite receiver and TV Set L 2 SELECT to A V c 13 To record a programme via the satellite receiver set the input mode to L 2 by pressing AUX and or PR e To receive a scrambled broadcast descramble the signal with the satellite receiver For details refer to the instruction manual for the satellite receiver and decoder Connecting Using a decoder You can enjoy the variety of programming that i
7. Push the JOG dial Turn the JOG dial to Channel the left or right to select the channel paren To set the tape speed press SP LP teww The current setting for the tape speed appears on the display panel for about 5 seconds Press SP LP ZIM again to change the setting while tape speed is displayed e You can cancel the setting at any time by pressing and holding the JOG dial for more than 3 seconds Repeat the steps A B H Press 24H EXPRESS The recorder turns off automatically and is displayed on the display panel NOTES e If Err appears on the display panel repeat the above steps again When a menu screen is shown you cannot use 24 Hour Express Programming function Press MENU to return to normal screen and try again e You can use 24 Hour Express Programming function also when the recorder is turned off Checking canceling or changing programme settings El Disengage timer recording standby mode Press then press I When AUTO TIMER is set to ON 12 press only O I FA Access Program Check screen START STOP CH DATE 8 00 10 00 3 24 12 Press 10 00 10 45 2 25 12 11 30 13 00 1 25 12 1 2 NEXT E Access Program screen TPT Press again Each time you press START STOP i 0 00 the next programmes screen appears SP VPS PDC OFF i Ei Cancel or change programme setting onr TwPROG 24 12 To cancel a programme press X WDR To change
8. dirty in the following cases in an environment prone to extreme temperature or humidity in a dusty environment flaw dirt or mold on video tapes continuous usage for a long time Use a dry cleaning cassette TCL 2 when Rough poor picture appears while a tape is played back The picture is unclear or no picture appears USE CLEANING CASSETTE appears on the screen only with O S D set to ON 12 Usable cassettes Compact VHS camcorder recordings can be played on this recorder Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full sized VHS cassette This recorder is equipped with SQPB S VHS QUASI PLAYBACK that lets you watch tapes recorded in the S VHS format and the SP mode with regular VHS resolution SQPB does not deliver Super VHS resolution This recorder can record on regular VHS and Super VHS cassettes However it will record regular VHS signals only S VHS recording is not possible with this recorder ATTENTION To mobile phone users Using a mobile phone in the vicinity of the recorder may cause picture vibration on the TV screen or change the screen to a blue back display On placing the recorder Some TVs or other appliances generates strong magnetic fields Do not place such appliance on top of the recorder as it may cause picture disturbance Buttons Connectors and Indicators Front Pan
9. set to ON the recorder automatically switches to LP mode to allow complete recording if there is not enough tape to record the entire programme while timer recording in SP mode For example recording a programme of 210 minutes in length onto a 180 minute tape Approximately 150 minutes Approximately 60 minutes SP mode LP mode Total 210 minutes NOTES f you have programmed the recorder to timer record 2 or more programmes do not use this function but change the tape speed manually during timer programming There may be some noise and sound disturbance where the tape speed switches from SP to LP mode on the tape This function is not available during ITR Instant Timer Recording and will not work properly with any tapes longer than E 180 or with some tapes of shorter lengths f you perform timer recording with both this function and VPS PDC activated and the programme goes beyond its originally scheduled length sometimes the programme cannot be recorded in its entirety E POWER SAVE ON OFF When this function is set to ON you can reduce the power consumption while the recorder is turned off NOTES During Power Save mode e the display panel is turned off e the Just Clock does not work e and the picture may be distorted momentarily when you turn on off the recorder Power Save does not work in the following cases e When L 2 SELECT is set to DECODER
10. 23 OSF C23 OSF 05 4C31 BBCI 12 C25 ESPN 12 C25 ESPN 06 C32 BBC2 13 or aa 13 inaa 07 C33 3SAT 14 Seg 07 C33 14 aai AY 4 gt MOVE MANUAL CH SET MENU EXIT av lt gt MOVE gt IMENU EXIT Repeat steps H E as necessary Z4 Return to normal screen Press MENU When receiving a scrambled broadcast NOTE When you select a country in Central or Eastern Europe for country setting you cannot use decoder with this recorder Ell Select decoder mode Set L 2 SELECT to DECODER F 13 FA Access Confirmation screen Perform step Il of Manual Channel Set 14 EJ Select position Press AV lt 1 gt to select the channel broadcasting scrambled programmes then press OK twice 3 Change decoder setting Press gt until OFF begins blinking and set it to ON by pressing AV Then press OK Repeat steps Ei B as necessary 4S E Return to normal screen Press MENU Changing station name A El Access Confirmation screen Perform step Hl of Manual Channel Set F 14 FA Select position Press AV lt gt until the desired channel begins blinking then press OK twice The Manual Channel Set screen appears Select station name Press gt until the station name ID begins blinking Press AV until the desired station name appears then press OK Repeat steps H E as necessary El Return to normal screen Press MENU Changing station name B El Ac
11. 3 4kg VHS PAL standard VIDEO AUDIO Signal system Recording system Signal to noise ratio Horizontal resolution Frequency range Normal audio PAL type colour signal and CCIR monochrome signal 625 lines 50 fields DA4 Double Azimuth head helical scan system 45 dB 250 lines 70 Hz to 10 000 Hz Hi Fi audio 20 Hz to 20 000 Hz Input Output 21 pin SCART connectors IN OUT x 1 IN DECODER x 1 RCA connectors VIDEO IN x 1 AUDIO IN x 1 AUDIO OUT x 1 TUNER TIMER TV channel storage 99 positions AUX position Capacity Tuning system Channel coverage VHF UHF Aerial output Memory backup time Frequency synthesized tuner 47 MHz 89 MHz 104 MHz 300 MHz 302 MHz 470 MHz 470 MHz 862 MHz UHF channels 22 69 Adjustable Approx 10 min ACCESSORIES Provided accessories Optional accessories RF cable Infrared remote control unit R6 battery x 2 Satellite Controller RM SD1 Specifications shown are for SP mode unless specified otherwise E amp O E Design and specifications subject to change without notice 16
12. CK OFF TV PR 21 CLOCK SET then press OK or gt Set the date and year 7 in the same way Holding AV changes the time in 30 minute intervals or changes the date in 15 day intervals EJ Set Just Clock Set to ON or OFF by pressing AV then press OK or gt Just Clock The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals by reading data from a PDC signal Normally set JUST CLOCK to ON NOTES Just Clock may not function properly depending on the reception condition When you select a country in Central or Eastern Europe for country setting you cannot use Just Clock Skip steps A B Set source channel position The recorder is preset to receive clock setting and adjustment data from channel position 1 Press AV to set the channel position to the number representing the station transmitting clock setting data then press OK or E Start clock Press MENU av gt MENU EXIT Tuner Set Perform the following steps only if the tuner has not been set correctly by Auto Set Up or Preset Download or if you have moved to a different area or if a new station starts broadcasting in your area The recorder needs to memorise all necessary stations in channel positions in order to record TV programmes Auto Channel Set automatically assigns all receivable stations in your area NOTE When you select a country in Central o
13. JVC LPT0627 001A COPYRIGHT 2001 VICTOR COMPANY OF JAPAN LTD SAFETY FIRST eccesssssessesssseees Buttons Connectors and Indicators Basic Connections Initial Settings Auto Set Up Preset Download Language Set T V Link Functions Satellite Receiver Control Set Playback ccscceccessscesees Recording seccssssccseees SHOWVIEW System Setup Timer Recording ssseccsscssesees SHOWVIEW Timer Programming c cceceeeeseeeeseeeeeseeeeteneeees Express Timer Programming eserse rniii iiiar 24 Hour Express Timer ProgrammMing ccccccesereee Checking canceling or changing programme settings 3 Automatic Satellite Programme Recording cececeee 10 Editing sscszcsssucesscccuucoscsccaicuscuteescecobssstadccssaeboesotsonsascutessesccozeacoseern 11 Editing with another video recorder or a camcorder s A dio DUDDING siv ci cscecccvescsoonsctastiacesviasbonssvospavsleretieteeotysyeys System Connections cscsccsceccssescssessesessessssessssessssessecessesessess OOO COON OUMNH POD Connecting to a satellite receiver 12 Connecting Using a decoder 12 Connecting Using a stereo system age 12 Subsidiary Settings scccescescessesees a 12 Mode Set 12 Clock Set 13 Tuner Setores we 13 Video Channel Setiivicstasniatniniencu wiarorminiaiai amet 16 Specifications NAE O 16 SAFETY FIRST Safety Precaut
14. M is the designation for tapes with SECAM signals that have been recorded on a MESECAM compatible PAL video cassette recorder PAL NTSC To record PAL signals or playback a PAL or NTSC tape MESECAM To record SECAM signals or play back a MESECAM tape NOTES About NTSC Playback Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen or cut off the top and bottom portions of superimposed displays This is not a malfunction The picture may roll up and down This can be corrected if your TV has the V HOLD control function The counter and tape remaining time readings will be incorrect During search still or frame by frame playback the picture will be distorted and there may be a loss of colour AUTO POWER OFF 3H OFF When this function is set to 3H the recorder turns off automatically if no operation is done in 3 hours AUTO POWER OFF IN 3MIN appears on the screen 3 minutes before the recorder is turned off Clock Set Turn on the recorder and the TV and set your TV to its AV mode or video channel El Access Main Menu screen then Initial Set screen Press MENU Press AV to place the pointer next to INITIAL SET then press OK or gt FA Access Clock Set screen Press AV to place the pointer next to CLOCK SET then press OK or gt Set time date and year Press AV until the desired time appears TME 4 DATE YEAR JUST CLO
15. Mains outlet RF Connection Disconnect the TV aerial cable from the TV Connect the TV aerial cable to the ANT IN connector on the rear of the recorder 3 Connect the provided RF cable between the RF OUT connector on the rear of the recorder and the TV s aerial connector rm AV Connection If your TV is equipped with a 21 pin SCART connector perform AV connection to improve picture quality during tape playback Connect the aerial recorder and TV as shown in the illustration 2 Connect an optional 21 pin SCART cable between the L 1 IN OUT connector on the rear of the recorder and the TV s 21 pin SCART connector EJ Connect recorder to mains Plug the mains power cord into a mains outlet I Initial Settings After the O I is pressed for the first time to power on the recorder the recorder starts Auto Set Up or Preset Download ATTENTION If you have connected the recorder to a TV offering T V Link via a fully wired 21 pin SCART cable and if the TV is turned on the recorder automatically performs the Preset Download even if you perform Auto Set Up Before starting Perform Basic Connections gt 3 Set the TV to its AV mode with AV connection or UHF channel 36 with RF connection Auto Set Up Auto Channel Set Auto Clock Set Auto Guide Program Number Set If you select a country in Central or Eastern Europe set the clock and Guide Program Numbe
16. O S D to ON to display the indications on the screen c 12 Automatic operations after rewinding Next Function Memory The Next Function Memory tells the recorder what to do after rewinding Ensure that the recorder is in stop mode For Automatic Playback Start Press lt lt then press B within 2 seconds For Automatic Power Off Press lt lt a then press O I within 2 seconds For Automatic Timer Standby Press lt lt a then press within 2 seconds NOTE It is not possible to select the Automatic Timer Standby function if the cassette s record safety tab is removed Playing back tape repeatedly 100 times Repeat Playback During playback press and hold for more than 5 seconds gt on the display panel starts blinking slowly To stop playback press E on the remote control or W amp on the recorder NOTE Pressing lt 4 lt 4 gt gt or Il also stops Repeat Playback Locating beginning of recordings Index Search Index codes are placed on the tape at the beginning of each recording when recording on this recorder E While the tape is not running press lt or gt lt 4 or PI to start search BA To access a recording of 2 to 9 index codes away press lt or gt lt 4 or gt gt repeatedly until the correct number is displayed on the screen only if O S D is set to ON 12 Example To locate the beginning of B from the cur
17. Press B to resume recording e You can select channel in the recording pause mode Stop recording Press W on the remote OR Press W amp on the recorder control Recording Features Recording Resume Function If there is a power outage during recording or Instant Timer Recording or timer recording the recording will resume automatically when the power is restored to the recorder No setting is required for this function NOTE If a power outage exeed the recorder s memory backup time Recording Resume Function does not work Tape Remaining Time Time Counter Press to display the tape remaining time and time counter on the screen To reset the time counter press 0000 NOTES Set O S D to ON to display the indications on the screen c 12 Depending on the type of tape used the tape remaining time may not appear right away or is not correct may sometimes appear or the display may blink on occasion a oo Watching one programme while recording another Once recording is in progress all you need to do is to set the channel controls on the TV for the station you wish to view The programme selected with the TV s channel controls appears on the screen while the one selected with the PR is recorded on the tape If a decoder is connected to the recorder you can select a scrambled channel as well with the TV channel controls Specifying recordin
18. RTE ARTE PRO7 PRO7 B1 BERLIN1 RAIT RAI BBC BBC GROUP RAI2 RAI2 BBC1 BBC RAI3 RAI3 BBC2 BBC2 RET4 RETE4 BR3 BAYERN3 21 TELE21 C CANAL PLUS RTBF RTBF1 2 C1 PORTUGUSES RTL RTL CAN5 CANALE5 RTL2 RTL2 CANV KETNET CANVAS RTL4 RTL4 CH4 CHANNEL4 RTL5 RTL5 CH5 CHANNELS RTP RTP CHLD CHILD S4 SCHWEIZ4 CINE CINEMA SAT1 SAT1 CLUB TELECLUB SBS SBS CMT CMT SF1 SF1 CNN CNN SF2 SF2 CSUR ANDALUCIA SHOW SHOW DISC DISCOVERY SIC SOCIEDADE DR DR TV SKY SKY CHANNEL DR2 DR2 SKYN SKY NEWS DRS DRS SPRT SPORT DSF DSF SRTL SUPER RTL ETB1 ETB1 STAR STAR TV ETB2 ETB2 SVT1 SVT1 EURO EURONEWS SVT2 SVT2 EUSP EUROSPORTS SWR SUEDWEST3 FEMM FEMMAN TCC TCC FILM FILM TELE TELE FNET FILMNET TEL5 TELE5 FR2 France2 TF1 TFI FR3 France3 TMC TELEMONTECARLO GALA GALAVISION TNT TNT INT HR3 HESSEN3 TRT TRT INT NFO NFO KANAL TSI TSI TAI TALIA1 TSR TSR TAZ TALIA7 TV1 BRTN TV1 TV TV TV2 TV2 STV STV TV4 TV4 A2 A2 TV5 TV5 AB1 ABEL1 TV6 TV6 AN2 ANAL2 TVE1 TVE1 LOCA LOCAL TVE2 TVE2 M6 M6 TVG TV GALICIA MBC MBR TVI TV INDEPENDENT MCM MCM TVN TV NORGE MDR MDR VCR VIDEO MOVE MOVIE VERO VERONICA MTV MTV VH 1 VH 1 MTV3 MTV3 VIVA VIVA N3 NORD3 VIV2 VIVA2 N TV N TV VMTV VIDEO MUSIC NBC NBC SUPER VOX VOX NDR3 NDR3 VT4 VT4 NED1 NED1 VTM VTM NED2 NED2 WDR1 West1 NED3 NED3 WDR3 West3 NEWS YLE1 YLE1 NICK NICKELODEON YLE2 YLE2 NRK NRK ZDF ZDF NRK2 NRK2 ZTV ZTV The ID abbreviation is what is shown on screen in lieu of the station name The ID ab
19. SHOWVIEW is a registered trademark of Gemstar Development Corporation The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation When the equipment is installed in a cabinet or a shelf make sure that it has sufficient space on all sides to allow for ventilation 10 cm or more on both sides on top and at the rear When discarding batteries environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly Failure to heed the following precautions may result in damage to the recorder remote control or video cassette 1 DO NOT place the recorder in an environment prone to extreme temperatures or humidity in direct sunlight ina dusty environment in an environment where strong magnetic fields are generated on a surface that is unstable or subject to vibration 2 DO NOT NOT block the recorder s ventilation openings or holes If the ventilation openings or holes are blocked by a newspaper or cloth etc the heat may not be able to get out 3 DO NOT place heavy obj ects on the recorder or remote control 4 DO NOT place anything which might spill on top of the recorder or remote control If water or liquid is allowed to enter this equipment fire or electric shock may be caused DO NOT expose the apparatus to dripping or splashing 6 DO NOT use this equipment in a bathroom or places with
20. Set video channel With AV connection ape Press PR until the display panel shows A eg a ad 1L or 2 Now the video channel is set to off With RF connection Press PR or to set the video channel to a vacant position between 22 and 69 which is not occupied by any local station in your area Example If channel 50 is available in your EA wre area set the video channel to 50 1 LE a Then set your TV to UHF channel 50 If the two vertical white bars appear T clearly on the screen as shown on the right go to step B If the two vertical white bars do not appear fl clearly re set the video channel to another vacant position and try again EJ Exit Video Channel Set mode Press OK With AV connection To view picture signals from the recorder set your TV to its AV mode With RF connection The channel on which the two vertical white bars appear clearly is your video channel To view picture signals from the recorder set your TV to the video channel I Specifications GENERAL Power requirement Power consumption Power on Power off Temperature Operating Storage Operating position Dimensions W x Hx D Weight Format Maximum recording time 240 min with E 240 video cassette 480 min with E 240 video cassette SP LP AC 220 V 240 V 50 Hz 60 Hz 15 W 40W 5 C to 40 C 20 C to 60 C Horizontal only 400 mm x 94 mm x 270 mm
21. a programme press the appropriate button START STOP DATE DAILY WEEKLY PR VPS PDC and or SP LP To change TV PROG to SAT for the channel position press the number key 0 1 NEXT E Return to normal screen Press repeatedly until no Program screen is shown FA Re engage timer recording standby mode Press The recorder turns off automatically and is displayed on the display panel When AUTO TIMER is set to ON i 12 the timer recording standby mode automatically resumes when you turn off the recorder Automatic Satellite Programme Recording You can automatically record a satellite programme which is timer programmed on your satellite receiver E Connect a satellite receiver to the L 2 IN DECODER connector on the rear panel H Set timer programme on satellite receiver referring to its instruction manual Load a cassette with the record safety tab intact Set L 2 SELECT to A V or SAT C 13 H To set the tape speed press SP LP 4 The current setting for the tape speed appears on the display panel or the screen for about 5 seconds Press SP LP 4 47 again to change the setting while tape speed is displayed I Press SATO for more than 2 seconds The recorder turns off automatically and enter the Automatic Satellite Programme Recording mode the SAT indicator lights up When signals come into the recorder from th
22. breviation is listed in the Confirmation screen and is displayed on the screen when the recorder is tuned to a different station 15 Video Channel Set Video channel RF output channel is the channel on which your TV receives picture and sound signals from the recorder through the RF cable Perform the following steps only if interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area or if you change the connection from RF connection to AV connection or vice versa If you have connected the recorder to your TV via the AV connection set the video channel to off If you have connected the recorder to your TV via the RF connection set the correct video channel Make sure the recorder s power is off and there is no cassette inserted in the recorder E Access Video Channel Set mode I BIN Ob sat o Hold down W amp on the recorder until the 1 FD Suirevew display panel shows the following FA Set RF output system 3 5p ee The blinking number on the display C Jh Tetrevew indicates the RF output system of your country Press AV to set to 1 or 2 then press OK 1 B G 2 D K Major Countries TV System Austria Denmark Finland Holland Italy Norway Spain Switzerland Sweden B G Germany Egypt China Mongolia Rumania Bulgaria Czech Rep Slovakia Hungary Poland Russia DK EJ
23. ccidental erasure prevention To prevent accidental recording on a recorded cassette remove its record safety tab To record on it later cover the hole with adhesive tape Record safety tab Basic Recording Turn on the TV and select the video channel or AV mode E Load a cassette Make sure the record safety tab is intact If not cover the hole with adhesive tape before inserting the cassette The recorder turns on and the counter is reset automatically FA Select recording channel Press PR or the number keys Or push the JOG dial then turn it to the left or right e You can select channel in the stop mode or recording pause mode Set tape speed Press SP LP 4 The current setting for the tape speed appears on the display panel and the screen for about 5 seconds Press SP LP 4 again to change the setting while tape speed is displayed El Start recording On the recorder press Or on the remote control while holding press P If the tape reaches its end during recording the recording stops and and on the display panel blink Press ll on the recorder to eject the cassette or press lt iq on the remote control to rewind the tape When DIRECT REC is set to ON 12 if you press any button just after pressing on the recorder or and B on the remote control the recorder may not function properly During recording Pause recording Press II
24. cess Confirmation screen Perform step il of Manual Channel Set F 14 FA Select position Press AV lt gt until the desired channel begins blinking then press OK twice The Manual Channel Set screen appears Select character for station name Press gt until the first letter of the station name ID begins blinking Z4 Enter new character Press AV to cycle through the characters then press gt gt Enter the remaining characters the same way maximum of 4 After entering all characters press OK The characters available for the station name ID are A Z 0 9 X space If you make a mistake press lt until the incorrect character begins blinking Then enter the correct character by pressing AV E Return to normal screen Press MENU Fine tuning channels El Access Confirmation screen Perform step ll of Manual Channel Set F 14 FA Select position Press AV lt P until the channel you want to tune begins blinking then press OK twice The Manual Channel Set screen appears Perform tuning Press gt until begins blinking then press AV until the picture is its clearest Then press OK Repeat steps H E as necessary El Return to normal screen Press MENU TV station and ID list ID STATION NAME ID STATION NAME 1000 TV1000 ODE ODEON 3SAT 3SAT ORF1 ORF1 OLIV 9LIVE ORF2 ORF2 ADLT ADULT ORF3 ORF3 ANT3 ANTENA3 OWL3 OWL3 ARD ARD PREM PREMIERE A
25. changed to the same one as you set in step E Press AV to place the pointer next to CHANGED TO then press OK or gt AVISE to finish the Sat Control Set mode MENU EXIT If the satellite receiver s channel number has not been changed correctly Press AV to place the pointer next to NOT CHANGED then press OK or Then perform the procedure again from step E NOTE The Satellite Controller may not function properly with some types of satellite receiver SAT CONTROL SET SAT PROG 111 CHANGED TO 111 NOT CHANGED 5 I Playback Basic Playback Turn on the TV and select the video channel or AV mode E Load a cassette Make sure the window side is we a ae up the rear label side is facing 38650 P you and the arrow on the front of the cassette is pointing towards the recorder Do not apply too much pressure when inserting The recorder turns on and the counter is reset automatically If the cassette s record safety tab has been removed playback begins automatically FA Start playback Press B During playback Stop playback Press W on the remote OR Press W amp on the recorder control Pause playback and view still picture Press HI OR Push the JOG dial Press B to resume normal Push the JOG dial again to playback resume normal playback Pause and Frame by F
26. der Connect the camcorder s AUDIO VIDEO OUT connectors to the recorder s front panel AUDIO VIDEO input connectors When using a monaural camcorder connect its AUDIO OUT connector to the AUDIO L input connector on your recorder When the JVC camcorder is equipped with the Master Edit Control you can control the recorder from the camcorder Connect the mini plug cable not supplied with this recorder between the PAUSE connector on the recorder and the EDIT connector on the camcorder FA Load cassettes Insert the playback cassette into the source player and the cassette to be recorded on into the recording deck Select input mode on recording deck Select the correct external input on the recording deck On this recorder press AUX and or PR Connection with another video recorder Select L 1 for the L 1 IN OUT connector or L 2 for the L 2 IN DECODER connector Connection with a camcorder Select F 1 El Select edit mode Select the appropriate edit mode for the components if such a mode is equipped On this recorder set PICTURE CONTROL to EDIT F 12 E Start playback Engage the Play mode of the source player EJ Start recording Engage the Record mode of the recording deck Audio Dubbing Audio Dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack E Make connections Connect an audio component to the AUDIO in
27. e satellite receiver the recorder starts recording the SAT indicator blinks The recorder stops recording and turns off when signals stop coming in NOTES Be sure not to turn on the satellite receiver before the programme starts broadcasting otherwise the recorder starts recording when the satellite receiver is turned on To disengage the Automatic Satellite Programme Recording mode press SAT the SAT indicator goes off Depending on the type of satellite receiver Automatic Satellite Programme Recording may not be compatible B E S T does not work in the Automatic Satellite Programme Recording mode Power Save mode does not work in the Automatic Satellite Programme Recording mode Just Clock does not work in the Automatic Satellite Programme Recording mode 10 Editing Editing with another video recorder or a camcorder You can use your recorder as the source player or the recording deck You can use a camcorder as the source player and your recorder as the recording deck Refer also to the other components instruction manuals for connection and its operations El Make connections Connection with another video recorder 1 When using your recorder as the source player connect its L 1 IN OUT connector to the recording deck When using your recorder as the recording deck connect its L 1 IN OUT or L 2 IN DECODER connector to the source player Connection with a camcor
28. el Advanced JOG dial Cassette loading slot Pauselll Play oll AUDIO VIDEO A DUB SAT 24H EXPRESS input 3 connectors Stop Ejectill amp Record Infrared beam receiving window Display panel Timer mode indicator Start time SATO Z indicator VCR indicator Play indicator indicator Stop time REVIEW indicator Channel and auxiliary input Clock time Each time you press the display panel shows the channel number and the clock time alternatively Rear Panel SAT CONTROL L 1 IN OUT PAUSE Mains power cord ANT IN L 2 ENTREEDECODEUR INDECODER L 2 IN DECODER AUDIO OUT L R T OUT Remote control vf all STANDBY ON et TV VCR gt OY AUDIO lt 13 al l REVIEW D g Spes pesccsanstecsany DAILY QTDN center LO Q umber keys agi f WEEKLY HEBDO 1C4 PA VPS PDC Ey VPSPDC DAILY ATDY AUX T lt 7 C8 C3 X 0000 S as ial Timer FING Pe a e DATE Ka Dema ca apar DEBUT _ J SP LP ZIZ PROG MM asne D PROG B aime 30 SECS l e Play Fast Forward amp gt gt j E n SF ENTER Record piss Be Pause Il Stopili W TER OK a MENU E a xt ENTER ENTREE A rae Av lt 4 lt D lt P ITV PR TV PR TV A14 JVC PDC rec
29. et t 16 Language Set You can change the language setting manually as required El Access Main Menu screen then Auto Channel Set screen Press MENU Press AV to place the pointer next to AUTO CH SET then press OK or gt FA Select your country Press AV to place the pointer next to your country then press OK or gt MAIN MENU MODE SET MANUAL CH SET INITIAL SET Ay gt 68 Select language Press AV to place the pointer next to the desired language e You do not have to press OK pressing OK enters AUTO SET T V LINK screen EJ Return to normal screen Press MENU i T V Link Functions When you connect the recorder to your TV via a fully wired 21 pin SCART cable the following functions are available You can use these functions only with a TV offering T V Link etc For details refer to the instruction manual of your TV Compatible with TVs offering T V Link EasyLink Megalogic SMARTLINK Q Link DATA LOGIC or NexTView Link via fully wired 21 pin SCART cable The degree of compatibility and available functions may differ by system NexTView Link You can download the EPG Electronic Programme Guide information from your TV for timer programming on the recorder TV Auto Power On The TV will turn on and be set to its AV mode automatically whenever you play a tape VCR Auto Standby You can use your TV s remote control to turn off the recorder Direct Rec You can easily start reco
30. g length Instant Timer Recording ITR During recording press on the recorder repeatedly until the desired recording length appears on the display panel O on the display panel starts blinking Each time you press the button recording length increases in 30 minute intervals up to 6 hours The recorder turns off after recording is finished To cancel an ITR press ll on the remote control or W amp on the recorder Receiving stereo and bilingual programmes Your recorder is equipped with a Sound Multiplex decoder A2 and a Digital stereo sound decoder NICAM as well making reception of stereo and bilingual broadcasts possible When the channel is changed the type of broadcast being received will be displayed on the screen for a few seconds Type of broadcast being received On screen display A2 Stereo ST A2 Bilingual BIL Regular Monaural none NICAM Stereo ST NICAM NICAM Bilingual BIL NICAM NICAM Monaural NICAM e To listen to a stereo programme press AUDIO until HIFI L l gt R appears on the screen e To listen to a bilingual programme press AUDIO until HIFI L l gt or HIFI R appears on the screen To listen to the standard regular monaural audio while receiving a NICAM broadcast press AUDIO until NORM appears on the screen NOTE Set O S D to ON to display the indications on the screen c 12 To record stereo and bil
31. ingual programmes A2 Stereo programmes are automatically recorded in stereo on the Hi Fi audio track with the normal audio track recording mixed L and R channel sound e Bilingual programmes are automatically recorded in bilingual on the Hi Fi audio track The main soundtrack is recorded on the normal audio track To record NICAM stereo and bilingual programmes The NICAM audio programme is recorded on the Hi Fi audio track and the standard audio programme on the normal audio track NOTES e If the quality of stereo sound being received is poor the broadcast may be received in monaural with better quality Before playing back a programme recorded in stereo or a bilingual programme refer to Selecting Soundtrack F 6 stowview System Setup Set the Guide Program numbers manually only in the following cases When you select a country in Central or Eastern Europe for country setting When timer programming with the SHOWVIEW system the channel position where the station you wish to record is received on your recorder is not selected OR When you add a channel after Auto Set Up Preset Download or Auto Channel Set has taken place OR When you wish to timer record a satellite programme with the SHOWVIEW system Guide Program Number Set Guide Program GUIDE PROG number refers to the assigned TV station numbers according to broadcast area for the SHOWVIEW timer recording The Guide Pr
32. ions The rating plate and the safety caution are on the rear of the unit WARNING DANGEROUS VOLTAGE INSIDE WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE CAUTION m When you are not using the recorder for a long period of time it is recommended that you disconnect the power cord from the mains outlet m Dangerous voltage inside Refer internal servicing to qualified service personnel To prevent electric shock or fire hazard remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial ENGLISH VIDEO CASSETTE RECORDER HR J790EU HR J794EU SHOWVIEW S PB Alri INSTRUCTIONS Printed in Malaysia EU 1201 MNVID KPJ WARNING There are two different types of SECAM colour systems SECAM L used in FRANCE also called SECAM West and SECAM B used in Eastern European countries also called SECAM East 1 This recorder can also receive SECAM B colour television signals for recording and playback 2 Recordings made of SECAM B television signals produce monochrome pictures if played back on a video recorder of SECAM L standard or do not produce normal colour pictures if played back on a PAL video recorder with SECAM B system incorporated even if the TV set is SECAM compatible 3 SECAM L prerecorded cassettes or recordings made with a SECAM L video recorder produce monochrome pictures when played bac
33. k with this recorder 4 This recorder cannot be used for the SECAM L standard Use a SECAM L recorder to record SECAM L signals IMPORTANT m Please read the various precautions on pages 1 and 2 before installing or operating the recorder E It should be noted that it may be unlawful to re record pre recorded tapes records or discs without the consent of the owner of copyright in the sound or video recording broadcast or cable programme and in any literary dramatic musical or artistic work embodied therein For Italy It is declared that this product brand JVC conforms to the Ministry Decree n 548 of 28 Aug 95 published in the Official Gazette of the Italian Republic n 301 of 28 Dec 95 The STANDBY ON button does not completely shut off mains power from the unit but switches operating current on and off O shows electrical power standby and shows ON Video tapes recorded with this video recorder in the LP Long Play mode cannot be played back on a single speed video recorder VIS SQPB HA SHOWVIEW TR DELUXE Cassettes marked VHS or S VHS can be used with this video cassette recorder However S VHS recording is not possible with this model This model is equipped with SQPB S VHS QUASI PLAYBACK that makes it possible to play back S VHS recordings with regular VHS resolution HQ VHS is compatible with existing VHS equipment
34. linking Then press AV to select D K or B G Major Countries TV System Austria Denmark Finland Holland Italy Norway Spain Switzerland Sweden B G Germany Egypt China Mongolia Rumania Bulgaria Czech DIK Rep Slovakia Hungary Poland Russia Store new channel Press OK Repeat steps H H as necessary EA Return to normal screen Press MENU Deleting a channel El Access Confirmation screen Perform step ll of Manual Channel Set 14 FA Select position Press AV lt D to until the channel you want to delete begins blinking EJ Delete channel Press X The channel directly beneath the cancelled one moves up one line Repeat steps H E as necessary El Return to normal screen Press MENU Changing station channel positions El Access Confirmation screen Perform step Ill of Manual Channel Set 14 FA Select position Press AV lt D until the station you want to move begins blinking then press OK The channel number CH and the station name ID begin blinking Select new position Press AV lt P to move the station to the new position then press OK Example If you moved the station in position 4 to position 2 the stations originally in positions 2 and 3 each move down one space PR CH ID PR CH ID PR CH ID PR CH ID 08 C26 E SP O1s 25 ARD 2 08 C26 SP 09 55 WEST 09 55 WEST 03 a 10 ZDF 4 10 C24 SATI SKY 10 C24 SATI 04 C65 RAIT 11 C
35. llite receiver Turn on the satellite receiver s power EJ Access Main Menu screen then Initial Set screen Press MENU Press AV to place the pointer next to INITIAL SET then press OK or gt Access Sat Control Set screen Press AV to place the pointer next to SAT CONTROL SET then press OK or EJ Enter satellite receiver s brand Press the appropriate number keys to enter the brand code from the following list then press OK If the code you entered is invalid the code field will be reset Enter the correct SAT CONTROL SET 7 BRAND y a gt 10 9 gt code again MENU EXIT BRAND NAME CODE BRAND NAME CODE vc 73 MASPRO 70 AMSTRAD 60 61 62 63 92 NOKIA 87 94 CANAL 81 PACE 65 67 74 86 92 SATELLITE PANASONIC 74 92 CANAL 81 PHILIPS 66 84 101 D BOX 85 RADIX 78 ECHOSTAR 78 RFT 69 ECHOSTAR 82 SABA 97 VIA DIGITAL SAGEM 83 90 FINLUX 68 SALORA 68 FORCE 89 SAMSUNG 83 GALAXIS 88 SIEMENS 64 GRUNDIG 64 65 102 SKYMASTER 69 98 HIRSCHMANN 64 78 99 TECHNISAT 66 100 HUMAX 88 THOMSON 97 TT NOKIA 68 TPS 83 ATHREIN 70 71 96 TRIAX 91 LUXOR 68 WISI 64 MASCOM 93 E Select satellite receiver s channel for testing Press the appropriate number keys to enter the channel position on the satellite receiver then press OK The recorder enters the test mode E Check result of the test If the satellite receiver s channel number has been
36. o Set Up is completed SCAN COMPLETED appears for about 5 seconds then the normal screen appears El check results If both Auto Channel Set and Clock Set Dh sare h TTT cca ave been performed successfully the E LLII Sasevew correct current time is displayed Turn on the TV and select its video channel or AV mode Then make sure that all necessary stations have been stored in the recorder s memory by using the PR button s If Auto Channel Set has succeeded but Clock Set has not 1 is displayed Turn on the TV and select its video channel or AV mode Then make sure that all necessary stations have been stored in the recorder s memory by using the PR button s Perform Clock Set F 13 Av i gt MENU EXIT I OPSAT O VCR oetrevew nm If both Auto Channel Set and Clock Set ese have failed is displayed SoS SNR Make sure the cables are connected properly Turn off the recorder once then turn the recorder back on again The Country Set screen appears on the screen Perform Auto Set Up or Preset Download again Preset Download Auto Channel Set by downloading preset data from TV Auto Clock Set Auto Guide Program Number Set If you select a country in Central or Eastern Europe set the clock and Guide Program Number manually ATTENTION You can use this function only with a TV offering T V Link etc Be
37. ogram numbers can be found in most TV listings If the Guide Program numbers are not set properly when you timer record a TV programme using the SHOWVIEW system the recorder will record a TV programme of a different station When programming the timer using the SHOWVIEW system be sure to check the desired channel is selected correctly El Access Main Menu screen then Initial Set screen Press MENU Press AV to place the pointer next to INITIAL SET then press OK or FA Access Guide Program Set screen Press AV to place the pointer next to GUIDE PROG SET then press OK or gt Input Guide Program number Press AV to select the Guide Program GUIDE PROG SET GUIDE PROG TV PROG number as shown in the TV listing then Nee press OK or P Ei Input receiving channel number Press the number key 0 to select TV PROC or SAT Press AV to select the number of the channel on which the Guide Program number s broadcast is received then press OK or gt To timer record a satellite programme with the SHOWVIEW system you need to install an optional Satellite Controller and perform the procedure described in Satellite Receiver Control Set 5 Repeat steps El B as necessary Return to normal screen Press MENU avi gt 0 SAT IMENU EXIT i Timer Recording Up to 8 timer recording programmes can be made Before starting e If you select a country in Central or Eas
38. ording With this system your recorder will start and stop recording when the preset TV programmes actually start and end even if the broadcast time of a preset TV programme is changed NOTE When you use Express Timer Programming set the start time VPS or PDC time exactly as advertised in the TV listing How to check if the station being received transmits a VPS PDC signal Excepting in Central and Eastern Europe 1 Press until the channel position appears on the display panel 2 Hold down START for about 5 seconds VPS PDC appears blinking on the screen If a VPS PDC signal is detected from the station VPS PDC will stop blinking If no VPS PDC signal is detected from the station VPS PDC will blink at a slower rate 3 Press or START again to return to normal screen 24 Hour Express Timer Programming You can programme a timer recording that starts within 24 hours El Press 24H EXPRESS The start time SA indicator gt starts blinking on the display PU panel EA Turn the JOG dial to the left or rightto Start time set the start time ae y ksaro One click stop of the JOG dial changes BOL the time in 5 minute intervals v E Push the JOG dial The stop time Stop time indicator starts blinking on the display omm gn panel Turn the JOG dial to the left or right JL LI reven to set the stop time El
39. ording is not possible in Central and Eastern Europe On screen display If you press OK on the remote control when O S D is set to ON 12 you can see the current recorder status on the screen To clear the on screen display press OK again The indications are not recorded even if the recorder is in the recording mode ll PR 1ARD co SP ST 3 ee E Hi FI 1 23 45 NORM REMAIN 1 00 Recorder operation mode Tape speed Tape direction O Time counter Tape remaining time Audio mode Tape position The position of in relation to 0 Beginning or End shows the current position on the tape VPS PDC indicator PDC recording is not possible in Central and Eastern Europe Type of broadcast Current day month year Clock Channel and auxiliary input Cassette loaded mark Basic Connections El Check contents Make sure the package contains all of the accessories listed in Specifications I gt 16 PA Situate recorder Place the recorder on a stable horizontal surface Connect recorder to TV Aerial connector Back of TV TV aerial cable 21 pin SCART connector RF cable 21 pin SCART cable provided not provided Mains power cord Back of recorder L 1 IN OUT RF OUT
40. ou are editing tapes After you finish editing select AUTO AUTO TIMER ON OFF When this function is set to ON The timer recording standby mode is automatically engaged when the recorder is turned off It is temporarily canceled when the recorder is turned on You do not have to press to engage or disengage the timer recording standby mode When this function is set to OFF Press to engage or disengage the timer recording standby mode E 0 S D ON OFF When this function is set to ON various recorder status information on screen display appears on the screen NOTE When you use the recorder as the source player for editing a tape be sure to set this function to OFF Otherwise the recorder status information will be recorded on the edited tape E DIRECT REC ON OFF When this function is set to ON you can easily start recording the programme that you are watching on your TV Press and hold and press on the remote control or press on the recorder NOTES When you use this function be sure to use a TV offering T V LINK etc and connect a fully wired 21 pin SCART cable between the recorder and the TV When DIRECT REC is set to ON if you press any button just after pressing on the recorder or and on the remote control the recorder may not function properly E AUTO SP LP TIMER ON OFF When this function is
41. put connectors on the recorder s front panel When connecting a monaural audio component use only the recorder s AUDIO L input connector Your recorder CD player etc ar AT To AUDIO f f Original sound Audio Mixer Mixer output CD player etc To AUDIO AUDIO input 4 OUT Your recorder FA Select input mode on recording deck Press AUX and or PR to select F 1 EJ Locate start point and engage Audio Dubbing mode Load a cassette and press on the recorder Press Ii at the point where you want to start dubbing then press A DUB The recorder enters the Audio Dubbing Pause mode O blinks and E gt lights on the display panel To perform Audio Dubbing with audio mixing press AUDIO twice Audio Dubbing with audio mixing is not possible if you are using a monaural audio component or if you don t have an audio mixer Ei Start dubbing Engage the Play mode of the audio component then press gt on the recorder Audio Dubbing begins at this point e To pause dubbing press II Press gt to resume dubbing End Audio Dubbing Press W on the remote control or W amp on the recorder then engage the Stop mode of the audio component NOTES When monitoring the sound during Audio Dubbing the normal soundtrack is automatically selected If you wish to hear the mixed sound Hi Fi Normal soundtracks press AUDIO to select HI
42. r Eastern Europe for country setting Guide Program numbers are not set automatically 8 Guide Program Number Set Auto Channel Set El Access Main Menu screen then Auto Channel Set screen Press MENU Press AV to place the pointer next to AUTO CH SET then press OK or gt FA Select your country Press AV to place the pointer next to your country then press OK or gt 13 Select language Press AV to place the pointer next to the desired language El Perform Auto Channel Set CD PR CH D 25 ARD 08 C26 E SP c08 SKYTS 09 55 WEST Press OK twice When Auto Channel Set is 10 C24 SATI completed SCAN COMPLETED is 65 RAN 11 623 OSF displayed on the screen for about 1800 5 seconds then the Confirmation screen er ca gt S EDIT appears X DELETE When you select a country in Central or WMENUL EXIT Eastern Europe for country setting station names ID are not stored automatically Change station names manually gt 15 E Return to normal screen Press MENU NOTES Depending on reception conditions the stations may not be stored in order and the station names may not be stored correctly f no sound accompanies the picture or the audio sounds unnatural on some channels select the appropriate TV system for those channels To delete stations with poor reception condition refer to Deleting a channel 7 14 Manual Channel Set Store channels that were not s
43. r manually E Turn on recorder Press The Country Set screen appears on the screen If you have connected your TV to the GREECE recorder with RF connection and the on MAgYARORSZAG screen display appearing on UHF eames channel 36 looks distorted perform Video Channel Set lt 16 IMENU EXIT FA Select your country Press AV to place the pointer next to your country then press OK The language is automatically selected for the on screen display depending on the country you have selected The AUTO SET T V LINK screen appears e If you select BELGIUM or SUISSE and press OK the Language Set screen appears Press AV to place the pointer next to the desired language then press OK Go to step E e If you select MAGYARORSZ G ESK REPUBLIKA POLSKA or OTHER EASTERN EUROPE press OK The Clock Set screen appears Press AV until the desired time appears then press OK or gt Set the date and year in the same way Holding AV changes the time in 30 minute intervals or changes the date in 15 day intervals Then press MENU and go to step E Perform Auto Set Up Press AV to place the pointer next to AUTO SET and press OK or gt T V LINK e If you are using the display panel press AV to select Auto and press OK or gt a REPUBLIKA K DANMAR DEUTSCHLAND ESPANA CLOCK SET SIME DATE 0 0 01 a S o L io I ILI L a O REVIEW Do NOT press any button during Auto Set Up When the Aut
44. rame playback OR Push the JOG dial to pause then turn the JOG dial to the Press Ill to pause then press aa or BPI or II repeatedly left or right Press B to resume normal Push the JOG dial again to playback resume normal playback High Speed Search Press lt 4 lt 4 or DP OR Turn the JOG dial quickly to the left or right Press B to resume normal playback If you press and hold lt lt or gt gt for more than 2 seconds simply releasing it cancels the picture search and normal playback resumes Variable Speed Search including slow motion Press ka a or BPI repeatedly OR Turn the JOG dial to the left or right Press B to resume normal playback Each time you press lt 4 or BPI or each time JOG dial passes a click position the playback speed changes To decrease the speed during picture search press the opposite direction button repeatedly or turn the dial in the opposite direction During still picture press and hold gt to start forward or lt lt to start reverse slow motion playback When you release the button still picture resumes During still picture holding Hl for more than 2 seconds also starts forward slow motion playback If you press Hl again still picture resumes TV PR4 2 Ss WS Reverse 5 Forward TV PR Reverse Reverse Slow Forward Reverse slow A Normal search A motion search 3 steps play motion 2 steps play 4 steps P 2 steps P P
45. rding the programme that you are watching on your TV When you use this function set DIRECT REC to ON F 12 Satellite Receiver Control Set When you use an optional Satellite Controller and perform the following settings you can control your satellite receiver s channel for timer recording Approximately 20 seconds before the timer recording starts the recorder sets its input mode to L 2 and the Satellite Controller switches the satellite receiver s channels NOTE The Satellite Controller does not function for 24 Hour Express Timer Programming E Situate Satellite Controller Place the Satellite Controller so that the path between its transmitter and the satellite receiver s remote sensor is unobstructed FA Attach Satellite Controller Fix securely using the adhesive strip attached on the back of the Satellite Controller Satellite receiver Satellite Controller not provided suggested locations Your recorder Make connections Connect the recorder s L 2 IN DECODER connector to the satellite receiver s 21 pin SCART connector EJ Connect Satellite Controller to recorder Connect the Satellite Controller to the SAT CONTROL connector on the rear panel Satellite receiver Transmitter t To VCR connector Satellite Controller not provided 21 pin SCART cable not provided To L 2 IN DECODER Your recorder To SAT CONTROL E Turn on sate
46. rent position press lt twice To locate the beginning of D from A the current position press gt once Playback begins automatically when the desired recording is located 1 23 45 REMAIN 1 00 Current position B 2 1 1 2 3 lt gt Index number Locating beginning of timer recordings Instant Review After ensuring that the recorder is turned off and that the timer mode is disengaged press REVIEW The recorder turns on and rewinds to the index code indicating the beginning of the last timer recorded programme then begins playback automatically You can access a programme as far as 9 index codes away from the current tape position For example if you have timer recorded 3 programmes the REVIEW indicator and 3 blink To watch the first of the 3 programmes press REVIEW three times The number of recorded programmes is not displayed on the display panel after Automatic Satellite Programme Recording The Instant Review function can also operate if the recorder is turned on S 7 Ob sate x I Serene Skipping unwanted portions Skip Search Press 30 SEC amp once to 4 times during playback Each press initiates a 30 second period of high speed playback up to 2 minutes When the specified portion of the tape is skipped normal playback resumes automatically To return to normal playback during Skip Search press i Recording A
47. s available through scrambled channels 1 Set L 2 SELECT to DECODER 13 2 Connect the recorder s L 2 IN DECODER connector to the decoder s 21 pin SCART connector using a 21 pin SCART cable Perform the procedure as described in When receiving a scrambled broadcast 14 ps Connecting Using a stereo system You can listen to the soundtrack through your stereo system Connect the AUDIO OUT L and R connectors on the recorder to the AUX IN or TAPE MONITOR connectors on your stereo system s receiver or amplifier When listening to sound through the connected stereo system turn the TV s volume down completely j Subsidiary Settings Mode Set You can change various mode settings Turn on the recorder and the TV and set your TV to its AV mode or video channel El Access Main Menu screen then Mode Set screen Press MENU Press AV to place the pointer next to MODE SET then press OK or MAIN MENU MODE SET AUTO CH SET MANUAL CH SET INITIAL SET FA Select mode Press AV to place the pointer next to the item you want to set AV gt 8 MENU EXIT MODE SET PREVIOUS PAGE L 2 SELECT AN COLOUR SYSTEM __ PAL NTSC Ly AUTO POWER OFF OFF PICTURE CONTROL AUTO AUTO TIMER OFF D ON DIREC TREC AUTO SP gt LP TIMER POWER SAVE NEXT PAGE av gt GS MENU EXIT MENU EXIT AV gt OS EJ Change setting Press OK or gt The default
48. setting is bold in the following table Press MENU to return to normal screen E B E S T ON OFF When B E S T Biconditional Equalized Signal Tracking system is set to ON the recorder checks the condition of the tape in use during playback and recording and compensates to provide the highest possible pictures When B E S T works bESt appears blinking on the display panel B E S T takes place whenever you play back a tape or start recording after inserting a cassette NOTE The recorder checks the tape condition for about 7 seconds then starts recording To make sure you record the desired scene or programme completely perform the following steps Press and hold Ii and press After about 7 seconds the recorder re enters Record Pause mode Press to start recording rm E PICTURE CONTROL AUTO NORM EDIT SOFT SHARP This function helps you to adjust the playback picture quality according to your preference AUTO NORM Normally select this Picture quality is adjusted automatically When B E S T is OFF NORM will appear instead of AUTO EDIT Minimizes picture degradation during editing recording and playback SOFT Reduces image coarseness when viewing overplayed tapes containing much noise SHARP Clearer sharper edged picture when viewing images with much flat same coloured surfaces such as cartoons NOTE Select EDIT when y
49. sure to use a fully wired 21 pin SCART cable Compatible with TVs offering T V Link EasyLink Megalogic SMARTLINK Q Link DATA LOGIC or NexTView Link via fully wired 21 pin SCART cable The degree of compatibility and available functions may differ by system Before starting Perform steps ll H of Auto Set Up El Perform Preset Download Press AV to place the pointer next to T V LINK and press OK or If you are using the display panel press AV to select CH and press OK or D AUTO SET E T V LINK av gt ro Obsaro MENU EXIT LHT ey Do NOT press any button during Preset Download When Preset Download is completed COMPLETED appears for about 5 seconds then the normal screen appears FA Check results Perform step E of Auto Set Up EJ Set video channel to off Perform Video Channel Set lt 16 NOTES Depending on the area the recorder cannot perform Auto Set Up or Preset Download properly In the area where no TV station transmits a PDC Programme Delivery Control signal the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set If you have moved to a different area perform Video Channel Set 16 with RF connection Tuner Set 7 13 and Clock Set F 13 as required If a new station starts broadcasting in your area perform Tuner Set F 13 and if necessary Video Channel S
50. tern Europe for country setting perform Guide Program Number Set 8 Set the clock properly 13 Set COLOUR SYSTEM to the appropriate mode 13 Load a cassette with the record safety tab intact NOTES e PDC recording is not possible in Central and Eastern Europe If all the 8 programmes have already been set PROGRAM FULL appears on the screen If there is a conflict in the timer schedule and one programme overlaps with another the programme starting earlier or programme with the lower programme number will be recorded After timer recording is completed the recorder turns off automatically e f the tape reaches its end during timer recordings the recording stops and O and gt on the display panel blink Press to disengage timer then press W amp on the recorder to eject the cassette or press 1 then press 44 on the remote control to rewind the tape e You can programme the timer recording while a regular recording is in progress the menu screens will not be recorded SHOWVIEW Timer Programming The SHOWVIEW numbers are the numbers next to the programme in most TV listing El Press PROG to access the SHOWVIEW NO screen _ SHOWVIEW NO gt 9 gt SHOWVIEW NO EXPRESS PROGRAMING T H Press the appropriate number keys to P i SHOWVIEW NO 123456789 input the SHOWVIEW number then press ple aod OK The SHOWVIEW program screen 21
51. tored during Auto Set Up Preset Download or Auto Channel Set ATTENTION Guide Program numbers are not set when channels are stored manually Perform Guide Program Number Set F 8 E Access Main Menu screen then Dec Confirmation screen c SKYTS ag Ki WEST Press MENU Press AV to place the 11550237 09t pointer next to MANUAL CH SET then Hi press OK or FA Select position Press AV lt D until an open channel position begins blinking then press OK The Manual Channel Set screen appears Select band Press AV to select CH regular or CC cable then press gt Ei Input channel 4 1 CURSOR lt gt Press the number keys to input the channel number you want to store Input 0 before FRE EXIT any single number entries To input the registered station name ID press until begins blinking then press AV When L 2 SELECT is set to A V or SAT the DECODER setting cannot be changed F 13 When you select a country in Central or Eastern Europe for country setting TV gt 00 X DELETE IMENU EXIT PR SCH lD FINE DECODER 5 SELECT TV ID FEINE SYSTEM SYSTEM setting appears instead of PR DECODER setting When you can see 8 the picture but can hear no audio select appropriate TV system For Central or Rae Eastern Europe D K or for Western Cn ea Europe B G Press gt until D K or B G b

Download Pdf Manuals

Related Search

Related Contents

  Service Manual  Manual de Usuario  Universal Security Instruments USI-1227L User's Manual  Philips DLA1162  

Copyright © All rights reserved. Failed to retrieve file